In Situ Raman Observation of Oxygen Activation and Reaction at Platinum-Ceria Interfaces during CO Oxidation

Heterointerface of Monodispersed Ultrathin-MnO2@Amorphous Carbon to Attain Durable Lattice Oxygen Redox Chemistry through Creation of Dual Lattice Oxygens

Lattice oxygen (OL) redox chemistry is a key to alleviating the energy and environmental crisis, but it faces challenges in activating the OL while ensuring structural stability. We disclosed herein that engineering a heterogeneous interface between ultrathin oxide and amorphous carbon can attain the durable OL redox chemistry without introducing catalytically impure sites. To this end, we proposed a green strategy to grow ∼3.9 nm-thickness wrinkled δ-MnO2 nanosheets that are rich in defects and are vertically aligned on amorphous carbon spheres. Experiments and calculations reveal that the electrons can easily migrate from the amorphous carbon to MnO2 at the δ-MnO2@C heterointerface. The heterogeneous interfaces can not only regulate the Mn-O bond and create oxygen defects in δ-MnO2 but also introduce lattice oxygen with varying reactivities. Specifically, the δ-MnO2@C structure carries more activated lattice oxygen that contributes to the enhanced activity on catalytic oxidation of bioderived 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA), with a high FDCA formation rate of 1759 μmol gcat-1 h-1 and a high selectivity of 95%. The heterogeneous interface of MnO2@C also brings inert lattice oxygen, so that it manifests high structural stability during the oxidation reactions. This work deepens the fundamental understandings in the engineering of lattice oxygen for durable lattice oxygen redox chemistry and showcases an effective interface technique in creating advanced catalysts for clean sustainable energy.

Design and regulation of defective electrocatalysts

Electrocatalysts are the key components of electrochemical energy storage and conversion devices. High performance electrocatalysts can effectively reduce the energy barrier of the chemical reactions, thereby improving the conversion efficiency of energy devices. The electrocatalytic reaction mainly experiences adsorption and desorption of molecules (reactants, intermediates and products) on a catalyst surface, accompanied by charge transfer processes. Therefore, surface control of electrocatalysts plays a pivotal role in catalyst design and optimization. In recent years, many studies have revealed that the rational design and regulation of a defect structure can result in rearrangement of the atomic structure on the catalyst surface, thereby efficaciously promoting the electrocatalytic performance. However, the relationship between defects and catalytic properties still remains to be understood. In this review, the types of defects, synthesis methods and characterization techniques are comprehensively summarized, and then the intrinsic relationship between defects and electrocatalytic performance is discussed. Moreover, the application and development of defects are reviewed in detail. Finally, the challenges existing in defective electrocatalysts are summarized and prospected, and the future research direction is also suggested. We hope that this review will provide some principal guidance and reference for researchers engaged in defect and catalysis research, better help researchers understand the research status and development trends in the field of defects and catalysis, and expand the application of high-performance defective electrocatalysts to the field of electrocatalytic engineering.

Visualization of the Distance-Dependent Synergistic Interaction in Heterogeneous Dual-Site Catalysis

Understanding the characteristics of interfacial hydroxyl (OH) at the solid/liquid electrochemical interface is crucial for deciphering synergistic catalysis. However, it remains challenging to elucidate the influences of spatial distance between interfacial OH and neighboring reactants on reaction kinetics at the atomic level. Herein, we visualize the distance-dependent synergistic interaction in heterogeneous dual-site catalysis by using ex-situ infrared nanospectroscopy and in situ infrared spectroscopy techniques. These spectroscopic techniques achieve direct identification of the spatial distribution of synergistic species and reveal that OH facilitates the reactant deprotonation process depending on site distances in dual-site catalysts. Via modulating Ir-Co pair distances, we find that the dynamic equilibrium between generation and consumption of OH accounts for high-efficiency synergism at the optimized distance of 7.9 Å. At farther or shorter distances, spatial inaccessibility and resistance of OH with intermediates lead to OH accumulation, thereby diminishing the synergistic effect. Hence, a volcano-shaped curve has been established between the spatial distance and mass activity using formic acid oxidation as the probe reaction. This notion could also be extended to oxophilic metals, like Ir-Ru pairs, where volcano curves and dynamic equilibrium further evidence the universal significance of spatial distances.

Edge-Rich Pt-O-Ce Sites in CeO2 Supported Patchy Atomic-Layer Pt Enable a Non-CO Pathway for Efficient Methanol Oxidation

Rational design of efficient methanol oxidation reaction (MOR) catalyst that undergo non-CO pathway is essential to resolve the long-standing poisoning issue. However, it remains a huge challenge due to the rather difficulty in maximizing the non-CO pathway by the selective coupling between the key *CHO and *OH intermediates. Here, we report a high-performance electrocatalyst of patchy atomic-layer Pt epitaxial growth on CeO2 nanocube (Pt ALs/CeO2) with maximum electronic metal-support interaction for enhancing the coupling selectively. The small-size monolayer material achieves an optimal geometrical distance between edge Pt-O-Ce sites and *OH absorbed on CeO2, which well restrains the dehydrogenation of *CHO, resulting in the non-CO pathway. Meanwhile, the *CHO/*CO intermediate generated at inner Pt-O-Ce sites can migrate to edge, inducing the subsequent coupling reaction, thus avoiding poisoning while promoting reaction efficiency. Consequently, Pt ALs/CeO2 exhibits exceptionally catalytic stability with negligible degradation even under 1000 s pure CO poisoning operation and high mass activity (14.87 A/mgPt), enabling it one of the best-performing alkali-stable MOR catalysts.

Theoretical study of structure sensitivity on ceria-supported single platinum atoms and its influence on carbon monoxide adsorption

Density functional theory (DFT) calculations explore the stability of a single platinum atom on various flat, stepped, and defective ceria surfaces, in the context of single-atom catalysts (SACs) for the water-gas shift (WGS) reaction. The adsorption properties and diffusion kinetics of the metal strongly depend on the support termination with large stability on metastable and stepped CeO2(100) and (210) surfaces where the diffusion of the platinum atom is hindered. At the opposite, the more stable CeO2(111) and (110) terminations weakly bind the platinum atom and can promote the growth of metallic clusters thanks to fast diffusion kinetics. The adsorption of carbon monoxide on the single platinum atom supported on the various ceria terminations is also sensitive to the surface structure. Carbon monoxide weakly binds to the single platinum atom supported on reduced CeO2(111) and (211) terminations. The desorption of the CO2 formed during the WGS reaction is thus facilitated on the latter terminations. A vibrational analysis underlines the significant changes in the calculated scaled anharmonic CO stretching frequency on these catalysts.

Metal-support interaction in supported Pt single-atom catalyst promotes lattice oxygen activation to achieve complete oxidation of acetone at low concentrations

A precious metal catalyst with loaded Pt single atoms was prepared and used for the complete oxidation of C3H6O. Detailed results show that the T100 of the 1.5Pt SA/γ-Al2O3 catalyst in the oxidation process of acetone is 250 °C, the TOF of Pt is 1.09 × 10-2 s-1, and the catalyst exhibits good stability. Characterization reveals that the high dispersion of Pt single atoms and strong interaction with the carrier improve the redox properties of the catalyst, enhancing the adsorption and dissociation capability of gaseous oxygen. DFT calculations show that after the introduction of Pt, the oxygen vacancy formation energy on the catalyst surface is reduced to 1.2 eV, and PDOS calculations prove that electrons on Pt atoms can be quickly transferred to O atoms, increasing the number of electrons on the σp * bond and promoting the escape of lattice oxygen. In addition, in situ DRIFTS and adsorption experiments indicate that the C3H6O oxidation process follows the Mars-van Krevelen reaction mechanism, and CH2 =C(CH3)=O(ads), O* (O2-), formate, acetate, and carbonate are considered as the main intermediate species and/or transients in the reaction process. Particularly, the activation rate of O2 and the cleavage of the -C-C- bond are the main rate-determining steps in the oxidation of C3H6O. This work will further enhance the study of the oxidation mechanism of oxygenated volatile organic pollutants over loaded noble metal catalysts.

Speciation Analysis of Metals and Metalloids by Surface Enhanced Raman Spectroscopy

The presence of metalloids and heavy metals in the environment is of critical concern due to their toxicological impacts. However, not all metallic species have the same risk level. Specifically, the physical, chemical, and isotopic speciation of the metal(loids) dictate their metabolism, toxicity, and environmental fate. As such, speciation analysis is critical for environmental monitoring and risk assessment. In the past two decades, surface-enhanced Raman spectroscopy (SERS) has seen significant developments regarding trace metal(loid) sensing due to its ultrahigh sensitivity, readiness for in situ real-time applications, and cost-effectiveness. However, the speciation of metal(loid)s has not been accounted for in the design and application of SERS sensors. In this Perspective, we examine the potential of SERS for metal(loid) speciation analysis and highlight the advantages, progress, opportunities, and challenges of this application.

Role of Interfacial Water Structure in the Electroreduction of NO over Cu2O

The electrochemical nitric oxide reduction reaction (NORR), which utilizes water as the sole hydrogen source, has the potential to facilitate ammonia production while concurrently mitigating pollutants. However, limited research has been dedicated to characterizing the structure of interfacial water due to the challenges associated with probing this intricate system, impeding the development of more efficient catalysts for the NORR process. Herein, the Cu2O microcrystals with distinct exposed facets, including {100}, {110}, and {111}, are employed for the model catalysts to investigate interfacial water structure and intermediate species in the NORR process. The results from shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) indicated that the NORR performance in 0.1 M Na2SO4 (with heavy water as the solvent) was positively correlated to the proportion of hydrated Na+ ion water. In addition, a sequence of intermediates from the NORR, including *NOH, *NH, *NH2, and *NH3, was detected by employing a combination of multiple in situ characterization methods. Furthermore, in conjunction with experimental results and theoretical calculations, we revealed the potential reaction pathway of NORR. This study offers novel insights into the NORR mechanism and valuable guidance for the design of high-performance catalysts for ammonia production.

Surface Defect-Induced Specific Catalysis Activates 100% Selective Sensing toward Amine Gases at Room Temperature

Achieving selective sensing toward target volatile organic compound gases is of vital importance in the fields of air quality assessment, food freshness evaluation, and diagnosis of patients via exhaled breath. However, chemiresistive sensors that exhibit specificity like biological enzymes in a complex environment are rare. Herein, we developed a strategy of optimizing oxygen vacancy structures in tin oxides to induce specific catalysis, activating 100% selective sensing toward amine gases at room temperature. In situ technologies and theoretical calculations reveal that the "donor-receptor" coordination between nitrogen atoms from amine molecules and bridging oxygen vacancies (OVBri)-induced electron-deficient center is the essence of specific catalysis and provides the bridge from the surface oxidation reaction to electrophysical characteristics evolution, which allows the sensor to exhibit amine-specific sensing behavior, even in gas mixtures. Moreover, OVBri enhances the selectivity by enabling a room-temperature sensing pathway where lattice oxygens participate in catalytic oxidation for amine molecules, resulting in record-high sensing values: 19,938.92 toward 100 ppm of triethylamine, 15,236.78 toward trimethylamine, and 123.41 toward diethylamine. Our findings illustrate the feasibility of designing specific active sites through defect engineering and can contribute to the advancement of highly selective sensors based on catalytic processes.

0.68% of solar-to-hydrogen efficiency and high photostability of organic-inorganic membrane catalyst

Solar-driven flat-panel H2O-to-H2 conversion is an important technology for value-added solar fuel production. However, most frequently used particulate photocatalysts are hard to achieve stable photocatalysis in flat-panel reaction module due to the influence of mechanical shear force. Herein, a highly active CdS@SiO2-Pt composite with rapid CdS-to-Pt electron transfer and restrained photoexciton recombination was prepared to process into an organic-inorganic membrane by compounding with polyvinylidene fluoride (PVDF). This PVDF networked organic-inorganic membrane displays high photostability and excellent operability, achieving improved simulated sunlight-driven alkaline H2O-to-H2 conversion activity (213.48 mmol m-2 h-1) following a 0.68% of solar-to-hydrogen efficiency. No obvious variation in its appearance and micromorphology was observed even being recycled for 50-times, which considerably outperforms the existing membrane photocatalysts. Subsequently, a homemade panel H2O-to-H2 conversion system was fabricated to obtain a 0.05% of solar-to-hydrogen efficiency. In this study, we opens up a prospect for practical application of photocatalysis technology.

Discovering Facet-Dependent Formation Kinetics of Key Intermediates in Electrochemical Ammonia Oxidation by a Electrochemiluminescence Active Probe

Facile evaluation of formation kinetics of key intermediate is crucial for a comprehensive understanding of electrochemical ammonia oxidation reaction (AOR) mechanisms and the design of efficient electrocatalysts. Currently, elucidating the formation kinetics of key intermediate associated with rate-determining step is still challenging. Herein, 4-phtalamide-N-(4'-methylcoumarin) naphthalimide (CF) is developed as a molecular probe to detect N2H4 intermediate during AOR via electrochemiluminescence (ECL) and further investigated the formation kinetics of N2H4 on Pt catalysts with different crystal planes. CF probe can selectively react with N2H4 to release ECL substance luminol. Thus, N2H4 intermediate as a key intermediate can be sensitively and selectively detected by ECL during AOR. For the first time, Pt(100) facet is discovered to exhibit faster N2H4 formation kinetics than Pt(111) facet, which is further confirmed by Density functional theory calculation and the finite element simulation. The AOR mechanism under the framework of Gerischer and Mauerer is further validated by examining N2H4 formation kinetics during the dimerization process (NH2 coupling). The developed ECL active probe and the discovered facet-dependent formation kinetics of key intermediates provide a promising new tool and strategy for the understanding of electrochemical AOR mechanisms and the design of efficient electrocatalysts.

Designing 3d Transition Metal Cation-Doped MRuOx As Durable Acidic Oxygen Evolution Electrocatalysts for PEM Water Electrolyzers

The continuous dissolution and oxidation of active sites in Ru-based electrocatalysts have greatly hindered their practical application in proton exchange membrane water electrolyzers (PEMWE). In this work, we first used density functional theory (DFT) to calculate the dissolution energy of Ru in the 3d transition metal-doped MRuOx (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) to evaluate their stability for acidic oxygen evolution reaction (OER) and screen out ZnRuOx as the best candidate. To confirm the theoretical predictions, we experimentally synthesized these MRuOx materials and found that ZnRuOx indeed displays robust acidic OER stability with a negligible decay of η10 after 15 000 CV cycles. Of importance, using ZnRuOx as the anode, the PEMWE can run stably for 120 h at 200 mA cm-2. We also further uncover the stability mechanism of ZnRuOx, i.e., Zn atoms doped in the outside of ZnRuOx nanocrystal would form a "Zn-rich" shell, which effectively shortened average Ru-O bond lengths in ZnRuOx to strengthen the Ru-O interaction and therefore boosted intrinsic stability of ZnRuOx in acidic OER. In short, this work not only provides a new study paradigm of using DFT calculations to guide the experimental synthesis but also offers a proof-of-concept with 3d metal dopants as RuO2 stabilizer as a universal principle to develop high-durability Ru-based catalysts for PEMWE.

Catalytic oxidation of lignite by Pt/TiO2 can enhance cadmium adsorption capacity

Addressing global warming necessitates innovative strategies in fossil fuel management. This study evaluates lignite, a low-rank coal with limited calorific value, exploring applications beyond its use as fuel. Utilizing Pt/TiO2 catalytic oxidation, the research aims to enhance the cadmium adsorption capacity of lignite in wastewater. Lignite, treated with 0.5% Pt/TiO2 at 125 °C for 2 h, demonstrated a threefold increase in cadmium adsorption capacity. Characterization using TGA-DSC confirmed the modification process as exothermic and self-sustainable. Spectroscopic analysis and Boehm titration revealed significant alterations in pore structure, surface area, and oxygen-containing functional groups, emphasizing the effectiveness of catalytic oxidation. Adsorption mechanisms such as complexation, cation exchange, and cation-π interactions were identified, enhancing Cd adsorption. Techniques, including the d-band model, H2-TPR, and O2-TPD, indicated that dissociative adsorption of molecular O2 and the subsequent generation of reactive oxygen species introduced additional oxygen-containing functional groups on the lignite surface. These findings provide essential strategies for the alternative use of lignite in environmental remediation, promoting sustainable resource utilization and enhancing cost-effectiveness in remediation processes. ENVIRONMENTAL IMPLICATION: This study innovates in using lignite to reduce cadmium (Cd) contamination in wastewater. Employing Pt/TiO2 catalytic oxidation, lignite is transformed, enhancing its cadmium adsorption capacity. This process, being exothermic, contributes to decreased energy consumption. The approach not only mitigates the hazardous impacts of cadmium but also aligns with sustainability by reducing greenhouse gas emissions and energy use, showcasing a multifaceted environmental advancement.

Catalytic CO Oxidation on the Cu+-Ov-Ce3+ Interface Constructed by an Electrospinning Method for Enhanced CO Adsorption at Low Temperature

It is crucial to eliminate CO emissions using non-noble catalysts. Cu-based catalysts have been widely applied in CO oxidation, but their activity and stability at low temperatures are still challenging. This study reports the preparation and application of an efficient copper-doped ceria electrospun fiber catalyst prepared by a facile electrospinning method. The obtained 10Cu-Ce fiber catalyst achieved complete CO oxidation at a temperature as low as 90 °C. However, a reference 10Cu/Ce catalyst prepared by the impregnation method needed 110 °C to achieve complete CO oxidation under identical reaction conditions. Asymmetric oxygen vacancies (ASOV) at the interface between copper and cerium were constructed, to effectively absorb gas molecules involved in the reaction, leading to the enhanced oxidation of CO. The exceptional ability of the 10Cu-Ce catalyst to adsorb CO is attributed to its unique structure and surface interaction phase Cu+-Ov-Ce3+, as demonstrated by a series of characterizations and DFT calculations. This novel approach of using electrospinning offers a promising technique for developing low-temperature and non-noble metal-based catalysts.

Chiral MoSe2 Nanoparticles for Ultrasensitive Monitoring of Reactive Oxygen Species In Vivo

Reactive oxygen species (ROS) are involved in neurodegenerative diseases, cancer, and acute hepatitis, and quantification of ROS is critical for the early diagnosis of these diseases. In this work, a novel probe is developed, based on chiral molybdenum diselenide (MoSe2 ) nanoparticles (NPs) modified by the fluorescent molecule, cyanine 3 (Cy3). Chiral MoSe2 NPs show intensive circular dichroism (CD) signals at 390 and 550 nm, whereas the fluorescence of Cy3 at 560 nm is quenched by MoSe2 NPs. In the presence of ROS, the probe reacts with the ROS and then oxidates rapidly, resulting in decreased CD signals and the recovery of the fluorescence. Using this strategy, the limit of detection values of CD and fluorescent signals in living cells are 0.0093 nmol/106 cells and 0.024 nmol/106 cells, respectively. The high selectivity and sensitivity to ROS in complex biological environments is attributed to the Mo4+ and Se2- oxidation reactions on the surface of the NPs. Furthermore, chiral MoSe2 NPs are able to monitor the levels of ROS in vivo by the fluorescence. Collectively, this strategy offers a new approach for ROS detection and has the potential to inspire others to explore chiral nanomaterials as biosensors to investigate biological events.

Breaking the Ru-O-Ru Symmetry of a RuO2 Catalyst for Sustainable Acidic Water Oxidation

Proton exchange membrane water electrolysis is a highly promising hydrogen production technique for sustainable energy supply, however, achieving a highly active and durable catalyst for acidic water oxidation still remains a formidable challenge. Herein, we propose a local microenvironment regulation strategy for precisely tuning In-RuO2 /graphene (In-RuO2 /G) catalyst with intrinsic electrochemical activity and stability to boost acidic water oxidation. The In-RuO2 /G displays robust acid oxygen evolution reaction performance with a mass activity of 671 A gcat -1 at 1.5 V, an overpotential of 187 mV at 10 mA cm-2 , and long-lasting stability of 350 h at 100 mA cm-2 , which arises from the asymmetric Ru-O-In local structure interactions. Further, it is unraveled theoretically that the asymmetric Ru-O-In structure breaks the thermodynamic activity limit of the traditional adsorption evolution mechanism which significantly weakens the formation energy barrier of OOH*, thus inducing a new rate-determining step of OH* absorption. Therefore, this strategy showcases the immense potential for constructing high-performance acidic catalysts for water electrolyzers.

Observing the Evolution of Metal Oxides in Liquids

Metal oxides with diverse compositions and structures have garnered considerable interest from researchers in various reactions, which benefits from transmission electron microscopy (TEM) in determining their morphologies, phase, structural and chemical information. Recent breakthroughs have made liquid-phase TEM a promising imaging platform for tracking the dynamic structure, morphology, and composition evolution of metal oxides in solution under work conditions. Herein, this review introduces the recent advances in liquid cells, especially closed liquid cell chips. Subsequently, the recent progress including particle growth, phase transformation, self-assembly, core-shell nanostructure growth, and chemical etching are introduced. With the late technical advances in TEM and liquid cells, liquid-phase TEM is used to characterize many fundamental processes of metal oxides for CO2 reduction and water-splitting reactions. Finally, the outlook and challenges in this research field are discussed. It is believed this compilation inspires and stimulates more efforts in developing and utilizing in situ liquid-phase TEM for metal oxides at the atomic scale for different applications.

Palladium atomic layers coated on ultrafine gold nanowires boost oxygen reduction reaction

Palladium-based nanocatalysts play an important role in catalyzing the cathode oxygen reduction reaction (ORR) for fuel cells working under alkaline conditions, but the performance still needs to be improved to meet the requirements for large-scale applications. Herein, Au@Pd core-shell nanowires have been developed by coating Pd atomic layers on ultrafine gold nanowires and display outstanding electrocatalytic performance towards alkaline ORR. It is found that Pd overlayers with atomic thickness can be coated on 3 nm Au nanowires under CO atmosphere and completely cover the surfaces. The obtained ultrafine Au@Pd nanowires exhibit an electrochemical active area (ECSA) of 68.5 m2/g and a mass activity of 0.91 A/mg (at 0.9 V vs. RHE), which is around 3.1 and 15.2 times higher than that of commercial Pd/C. The activity loss of the ultrafine Au@Pd nanowire after 10,000 cycles of accelerated degradation tests is only ∼20 %, demonstrating its much better stability compared to commercial Pd/C. Further characterizations combined with density functional theory (DFT) calculations demonstrate that the electronic interactions between Pd atomic layers and underlying Au can increase the electronic density of Pd and promote the efficient activation of oxygen, thus leading to the improved ORR performance.

The Role of In Situ/Operando IR Spectroscopy in Unraveling Adsorbate-Induced Structural Changes in Heterogeneous Catalysis

Heterogeneous catalysts undergo thermal- and/or adsorbate-induced dynamic changes under reaction conditions, which consequently modify their catalytic behavior. Hence, it is increasingly crucial to characterize the properties of a catalyst under reaction conditions through the so-called "operando" approach. Operando IR spectroscopy is probably one of the most ubiquitous and versatile characterization methods in the field of heterogeneous catalysis, but its potential in identifying adsorbate- and thermal-induced phenomena is often overlooked in favor of other less accessible methods, such as XAS spectroscopy and high-resolution microscopy. Without detracting from these techniques, and while aware of the enormous value of a multitechnique approach, the purpose of this Review is to show that IR spectroscopy alone can provide relevant information in this field. This is done by discussing a few selected case studies from our own research experience, which belong to the categories of both "single-site"- and nanoparticle-based catalysts.

Direct S-H Evidence Revealing the Photo-electrocatalytic Hydrogen Evolution Reaction Mechanism on CdS Using Surface-Enhanced Raman Spectroscopy

Photoelectrocatalytic water splitting using metal sulfides is a promising method for green hydrogen production. However, in situ probing of the hydrogen evolution reaction (HER) on sulfides with excellent performance remains a challenge. Here, we construct Au@CdS core-shell nanoparticles to study the HER on CdS, a typical HER catalyst, by surface-enhanced Raman spectroscopy (SERS) using a "borrowing" strategy. We directly capture the spectroscopic evidence of S-H intermediate under HER condition, further verified by isotopic experiments. Moreover, the population of S-H intermediates is improved by injecting charge carriers through light illumination and the S-H bond is weakened by introducing Pt to form a Au@Pt@CdS structure to change the interfacial electronic structure, both of them resulting in significant HER performance improvement. These findings can deepen the understanding of the HER mechanism and offer strategies for designing of cost-effective HER catalyst with high performance.

Fabricating Robust Pt Clusters on Sn-Doped CeO2 for CO Oxidation: A Deep Insight into Support Engineering and Surface Structural Evolution

The size effect on nanoparticles, which affects the catalysis performance in a significant way, is crucial. The tuning of oxygen vacancies on metal-oxide support can help reduce the size of the particles in active clusters of Pt, thus improving catalysis performance of the supported catalyst. Herein, Ce-Sn solid solutions (CSO) with abundant oxygen vacancies have been synthesized. Activated by simple CO reduction after loading Pt species, the catalytic CO oxidation performance of Pt/CSO was significantly better than that of Pt/CeO₂ . The reasons for the elevated activity were further explored regarding ionic Pt single sites being transformed into active Pt clusters after CO reduction. Due to more exposed oxygen vacancies, much smaller Pt clusters were created on CSO (ca. 1.2 nm) than on CeO₂ (ca. 1.8 nm). Consequently, more exposed active Pt clusters significantly improved the ability to activate oxygen and directly translated to the higher catalytic oxidation performance of activated Pt/CSO catalysts in vehicle emission control applications.

Electrocatalysis Mechanism and Structure-Activity Relationship of Atomically Dispersed Metal-Nitrogen-Carbon Catalysts for Electrocatalytic Reactions

Atomically dispersed metal-nitrogen-carbon catalysts (M-N-C) have been widely used in the field of energy conversion, which has already attracted a huge amount of attention. Due to their unsaturated d-band electronic structure of the center atoms, M-N-C catalysts can be applied in different electrocatalytic reactions by adjusting their own microscopic electronic structures to achieve the optimization of the structure-activity relationship. Consequently, it is of great significance for the revelation of electrocatalytic mechanism and structure-activity relationship of M-N-C catalysts. Thus, this review first introduces the relative research methods, including in situ/operando characterization techniques and theoretical calculation methods. Furthermore, clarifying the electrocatalytic mechanism and structure-activity relationship of M-N-C catalysts in different electrochemical energy conversion reactions is focused. Moreover, the future research directions are pointed out based on the discussion. This review will provide good guidance to systematically study the catalytic mechanism of single-atom catalysts and reasonably design the single-atom catalysts.

Catalytic NO Reduction by NO Pre-Adsorbed RhCeO2 NO- Clusters

A fundamental understanding on the dynamically structural evolution of catalysts induced by reactant gases under working conditions is challenging but pivotal in catalyst design. Herein, in combination with state-of-the-art mass spectrometry for cluster reactions, cryogenic photoelectron imaging spectroscopy, and quantum-chemical calculations, we identified that NO adsorption on rhodium-cerium bimetallic oxide cluster RhCeO₂ ^- can create a Ce³⁺ ion in product RhCeO₂ NO^- that serves as the starting point to trigger the catalysis of NO reduction by CO. Theoretical calculations substantiated that the reduction of another two NO molecules into N₂ O takes place exclusively on the Ce³⁺ ion while Rh behaves like a promoter to buffer electrons and cooperates with Ce³⁺ to drive NO reduction. Our finding demonstrates the importance of NO in regulating the catalytic behavior of Rh under reaction conditions and provides much-needed insights into the essence of NO reduction over Rh/CeO₂ , one of the most efficient components in three-way catalysts for NO_x removal.

Capture-bonding Super Assembly of Nanoscale Dispersed Bimetal on Uniform CeO2 Nanorod for the Toluene Oxidation

Elimination of VOCs by catalytic oxidation is an important technology. Here, a general synergistic capture-bonding superassembly strategy was proposed to obtain the nanoscale dispersed 5.8% PtFe₃ -CeO₂ catalyst, which showed a high toluene oxidation activity (T₁₀₀ =226 °C), excellent catalytic stability (125 h, >99.5%) and a good water resistance ability (70 h, >99.5%). Through the detailed XPS analysis, oxygen cycle experiment, hydrogen reduction experiment, and in-situ DRIFT experiment, we could deduce that PtFe₃ -CeO₂ had two reaction pathways. The surface adsorbed oxygen resulting from PtFe₃ nanoparticles played a dominant role, due to the fast cycling between the surface adsorbed oxygen and oxygen vacancy. In contrast, the lattice oxygen resulting from CeO₂ nanorods played an important role due to the relationship between the toluene oxidation activity and the metal-oxygen bonding energy. Furthermore, DFT simulation verified Pt sites were the dominant reaction active sites during this reaction.

Fine-tuned local coordination environment of Pt single atoms on ceria controls catalytic reactivity

Constructing single atom catalysts with fine-tuned coordination environments can be a promising strategy to achieve satisfactory catalytic performance. Herein, via a simple calcination temperature-control strategy, CeO2 supported Pt single atom catalysts with precisely controlled coordination environments are successfully fabricated. The joint experimental and theoretical analysis reveals that the Pt single atoms on Pt1/CeO2 prepared at 550 °C (Pt/CeO2-550) are mainly located at the edge sites of CeO2 with a Pt-O coordination number of ca. 5, while those prepared at 800 °C (Pt/CeO2-800) are predominantly located at distorted Ce substitution sites on CeO2 terrace with a Pt-O coordination number of ca. 4. Pt/CeO2-550 and Pt/CeO2-800 with different Pt1-CeO2 coordination environments exhibit a reversal of activity trend in CO oxidation and NH3 oxidation due to their different privileges in reactants activation and H2O desorption, suggesting that the catalytic performance of Pt single atom catalysts in different target reactions can be maximized by optimizing their local coordination structures.

Ptn-Ov synergistic sites on MoOx/γ-Mo2N heterostructure for low-temperature reverse water-gas shift reaction

In heterogeneous catalysis, the interface between active metal and support plays a key role in catalyzing various reactions. Specially, the synergistic effect between active metals and oxygen vacancies on support can greatly promote catalytic efficiency. However, the construction of high-density metal-vacancy synergistic sites on catalyst surface is very challenging. In this work, isolated Pt atoms are first deposited onto a very thin-layer of MoO₃ surface stabilized on γ-Mo₂N. Subsequently, the Pt-MoO_x/γ-Mo₂N catalyst, containing abundant Pt cluster-oxygen vacancy (Pt_n-O_v) sites, is in situ constructed. This catalyst exhibits an unmatched activity and excellent stability in the reverse water-gas shift (RWGS) reaction at low temperature (300 °C). Systematic in situ characterizations illustrate that the MoO₃ structure on the γ-Mo₂N surface can be easily reduced into MoO_x (2 < x < 3), followed by the creation of sufficient oxygen vacancies. The Pt atoms are bonded with oxygen atoms of MoO_x, and stable Pt clusters are formed. These high-density Pt_n-O_v active sites greatly promote the catalytic activity. This strategy of constructing metal-vacancy synergistic sites provides valuable insights for developing efficient supported catalysts.

Directly Convert Carbonaceous Microspheres to Three-Dimensional Porous Carbon Microspheres with a Robust Self-Supporting Structure as a Metal-Free SERS Substrate for Online High-Throughput Analysis

It is of great significance for practical applications to directly convert readily available biomass carbon into three-dimensional (3D) porous carbon microspheres with a self-supporting structure. Herein, we report the convenient conversion of biomass carbon microspheres to hierarchical porous carbon microspheres (HP-CMSs) with a robust self-supporting framework structure. A general SiO₂-induced etching mechanism is proposed for the formation of the HP-CMSs. Benefiting from this robust 3D self-supporting frame structure, these HP-CMSs have outstanding mechanical, chemical, and thermal stability. As a metal-free surface-enhanced Raman scattering (SERS) substrate with an ultrahigh specific surface area (4216 m² g^-1) and a high density of active sites, the HP-CMSs exhibit high sensitivity with a detection limit of 10^-10 M and a Raman enhancement factor of 3.5 × 10⁶. By integrating the enrichment and sensing functions of the HP-CMSs in a microfluidic channel, online high-throughput SERS detection of 20 samples within 5 min is achieved in a single channel, and the relative standard deviation of the signals between samples is only 5.1%. The current work develops a convenient preparation method that converts sustainable biomass carbon to 3D hierarchical porous carbon and provides a potential material for sensing, energy, catalysis, and other fields.

Heterostructured Ceria-Titania-Supported Platinum Catalysts for the Water Gas Shift Reaction

The water gas shift (WGS) reaction is a key process in the industrial hydrogen production and the development and application of the proton exchange membrane fuel cell. Metal oxide-supported highly dispersed Pt has been proved as an efficient catalyst for the WGS reaction. In this work, a series of supported 0.5Pt/xCe-10Ti (x = 1, 3, or 5) catalysts with different Ce/Ti molar ratios were prepared by a simple deposition-precipitation method. Compared with single TiO₂- or CeO₂-supported Pt catalysts, it was found that the 0.5Pt/3Ce-10Ti catalyst showed an obvious advantage in activity for the WGS reaction. In this catalyst, dispersed CeO₂ nanoparticles were supported on the TiO₂ sheets, and Pt single atoms and nanoparticles were located on CeO₂ and at the boundary of TiO₂ and CeO₂, respectively. It found that the reduction ability of the supported Pt catalyst was remarkably improved; meanwhile, the adsorption strength of CO on the surface of 0.5Pt/3Ce-10Ti was moderate. The heterostructured CeO₂-TiO₂ support gave an effective regulation on the Pt status and further influenced the CO adsorption ability, inducing excellent WGS reaction activity. This work provides a reference for the development and application of heterostructured materials in heterogeneous catalysis.