Strong Surface Hydration and Salt Resistant Mechanism of a New Nonfouling Zwitterionic Polymer Based on Protein Stabilizer TMAO

Effects of Carbon Spacer Length on Conformational Transitions and Protein Adsorption of Polyzwitterions

The properties of polyzwitterions are closely linked to their carbon spacer length (CSL) between oppositely charged groups. A thorough understanding of the effect of CSL on the properties of polyzwitterion-functionalized membranes is important for their fouling resistance and separation performances. In this work, polyzwitterion-functionalized membranes with different CSLs are prepared by coupling selective swelling-induced pore generation with zwitterionization, and the investigation is focused on comprehending the molecular mechanisms underlying protein resistance and conformational transitions within polyzwitterions under varying CSLs. The zwitterionized films show an enhancement in the surface negative potential with the increase of CSL, attributed to the negatively charged groups distanced from the positively charged groups. Quartz crystal microbalance with dissipation (QCM-D) demonstrates that zwitterionized films with different CSLs display distinct levels of resistance to protein adsorption. The trimethylamine N-oxide-derived polymer (PTMAO, CSL = 0) zwitterionized film shows the highest resistance compared to the poly(3-[dimethyl(2'-methacryloyloxyethyl] ammonio) ethanesulfonate (PMAES, CSL = 2) zwitterionized film and the poly(sulfobetaine methacrylate) (PSBMA, CSL = 3) zwitterionized film, owing to its electrical neutrality and pronounced hydrophilicity. Moreover, analysis of the anti-polyelectrolyte behaviors reveals that PTMAO does not undergo a significant conformation transition in deionized water and salt solutions, while the conformations of PMAES and PSBMA display to be more salt-dependent as the CSL increases, attributed to their increased polarization and dipole moment. As a result, the permeability of zwitterionized membranes exhibits enhanced salt responsiveness with the increase in CSL. The findings of this study are expected to facilitate the design of adsorption-resistant surfaces desired in diverse fields.

Molecular behavior of silicone adhesive at buried polymer interface studied by molecular dynamics simulation and sum frequency generation vibrational spectroscopy

Silicones have excellent material properties and are used extensively in many applications, ranging from adhesives and lubricants to electrical insulation. To ensure strong adhesion of silicone adhesives to a wide variety of substrates, silane-based adhesion promotors are typically blended into the silicone adhesive formulation. However, little is known at the molecular level about the true silane adhesion promotion mechanism, which limits the ability to develop even more effective adhesion promoters. To understand the adhesion promotion mechanism of silane molecules at the molecular level, this study has used sum frequency generation vibrational spectroscopy (SFG) to determine the behavior of (3-glycidoxypropyl)trimethoxy silane (γ-GPS) at the buried interface between poly(ethylene terephthalate) (PET) and a bulk silicone adhesive. To complement and extend the SFG results, atomistic molecular dynamics (MD) simulations were applied to investigate molecular behavior and interfacial interaction of γ-GPS at the silicone/PET interface. Free energy computations were used to study the γ-GPS interaction in the sample system and determine the γ-GPS interfacial segregation mechanism. Both experiments and simulations consistently show that γ-GPS molecules prefer to segregate at the interface between PET and PDMS. The methoxy groups on γ-GPS molecules orient toward the PDMS polymer phase. The consistent picture of interfacial structure emerging from both simulation and experiment provides enhanced insight on how γ-GPS behaves in the silicone - PET system and illustrates why γ-GPS could improve the adhesion of silicone adhesive, leading to further understanding of silicone adhesion mechanisms useful in the design of silicone adhesives with improved performance.

Bioinspired Zwitterionic Nanowires with Simultaneous Biofouling Reduction and Release

Marine biofouling is a complex and dynamic process that significantly increases the carbon emissions from the maritime industry by increasing drag losses. However, there are no existing non-toxic marine paints that can achieve both effective fouling reduction and efficient fouling release. Inspired by antifouling strategies in nature, herein, a superoleophobic zwitterionic nanowire coating with a nanostructured hydration layer is introduced, which exhibits simultaneous fouling reduction and release performance. The zwitterionic nanowires demonstrate >25% improvement in fouling reduction compared to state-of-the-art antifouling nanostructures, and four times higher fouling-release compared to conventional zwitterionic coatings. Fouling release is successfully achieved under a wall shear force that is four orders of magnitude lower than regular water jet cleaning. The mechanism of this simultaneous fouling reduction and release behavior is explored, and it is found that a combination of 1) a mechanical biocidal effect from the nanowire geometry, and 2) low interfacial adhesion resulting from the nanostructured hydration layer, are the major contributing factors. These findings provide insights into the design of nanostructured coatings with simultaneous fouling reduction and release. The newly established synthesis procedure for the zwitterionic nanowires opens new pathways for implementation as antifouling coatings in the maritime industry and biomedical devices.

New insight into the mechanism of biofouling-resistant thiazole-linked covalent organic frameworks for selective uranium capture from seawater

The extraction of uranium from seawater is crucial for the sustainable production of nuclear fuel. Traditional amidoxime-functionalized adsorbents suffer from competitive adsorption of vanadium ion and biofouling. These challenges motivate the development of novel adsorbents for selective uranium extraction from seawater. Herein, four kinds of thiazole-linked covalent organic frameworks (COFs) were investigated to harvest uranium from seawater. The selectivity and anti-biofouling performance were systematically investigated through the molecular dynamics (MD) simulations. Driven by the pore size sieving effect and electrostatic interaction, the Ca2UO2(CO3)3 complex and vanadate anions were selectively separated by different COFs in special areas. On one hand, benefits from the small steric partition factor, the Ca2UO2(CO3)3 complex can stick on the surface of COFs. On the other hand, the dispersive negatively and positively charged areas of studied COFs work as potential binding sites for the Ca2UO2(CO3)3 complex and vanadate anions, respectively. Moreover, an analysis of pulling force and desorption time between uranium and vanadium ions further confirmed the selectivity of various thiazole-linked COFs. The anti-biofouling property was comparatively investigated by dynamic trajectory and solvent accessible surface area. Our outcomes illustrate that the hydroxyl and zwitterionic groups in the thiazole-linked COFs endow their strong surface hydrations to resist marine biofouling. In particular, the TpBdsaPa is identified as a promising candidate due to charge dispersed zwitterionic group as well as remarkable anti-biofouling ability. The present study sheds an atomic-level understanding of the thiazole-linked COFs for selective uranium uptaking from seawater, which will provide aid to design novel adsorbent with highly selective uranium extraction capacity and strong anti-biofouling property.

Multihydrogen Bond Modulated Polyzwitterionic Removable Adhesive Hydrogel with Antibacterial and Hemostatic Function for Wound Healing

Wound management is a major challenge worldwide, placing a huge financial burden on the government of every nation. Wound dressings that can protect wounds, accelerate healing, prevent infection, and avoid secondary damage continue to be a major focus of research in the health care and clinical communities. Herein, a novel zwitterionic polymer (LST) hydrogel incorporated with [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (SBMA), mussel-inspired N-[tris(hydroxymethyl)methyl] acrylamide (THMA), and lithium magnesium salt was prepared for functional wound dressings. The incorporation of the THMA monomer containing three hydroxyl groups gives the hydrogel suitable adhesion properties (∼6.0 KPa). This allows the LST zwitterionic hydrogels to bind well to the skin, which not only protects the wound and ensures its therapeutic efficacy but also allows for painless removal and reduced patient pain. Zwitterionic sulfobetaine units of SBMA provide antimicrobial and mechanical properties. The chemical structure and microscopic morphology of LST zwitterionic hydrogels were systematically studied, along with their swelling ratio, adhesion, and mechanical properties. The results showed that the LST zwitterionic hydrogels had a uniform and compact porous structure with the highest swelling and mechanical strain of 1607% and 1068.74%, respectively. The antibacterial rate of LST zwitterionic hydrogels was as high as 99.49%, and the hemostatic effect was about 1.5 times that of the commercial gelatin hemostatic sponges group. In further studies, a full-thickness mouse skin model was selected to evaluate the wound healing performance. Wounds covered by LST zwitterionic hydrogels had a complete epithelial reformation and new connective tissue, and its vascular regenerative capacity was increased to about 2.4 times that of the commercial group, and the wound could completely heal within 12-13 days. This study provides significant advances in the design and construction of multifunctional zwitterionic hydrogel adhesives and wound dressings.

Highly Sensitive Early Diagnosis of Kidney Damage Using Renal Clearable Zwitterion-Coated Ferrite Nanoprobe via Magnetic Resonance Imaging In Vivo

Iron oxide nanoprobes exhibit substantial potential in magnetic resonance imaging (MRI) of kidney diseases and can eliminate the nephrotoxicity of gadolinium-based contrast agents (GBCAs). Nevertheless, there is an extreme shortage of highly sensitive and renal clearable iron oxide nanoprobes suitable for early kidney damage detection through MRI. Herein, a renal clearable ultra-small ferrite nanoprobe (UMFNPs@ZDS) is proposed for highly sensitive early diagnosis of kidney damage via structural and functional MRI in vivo for the first time. The nanoprobe comprises a ferrite core coated with a zwitterionic layer, and possesses a high T1 relaxivity (12.52 mm-1s-1), a small hydrodynamic size (6.43 nm), remarkable water solubility, excellent biocompatibility, and impressive renal clearable ability. In a rat model of unilateral ureteral obstruction (UUO), the nanoprobe-based MRI can not only accurately visualize the locations of renal injury, but also provide comprehensive functional data including peak value, peak time, relative renal function (RRF), and clearance percentage via MRI. The findings prove the immense potential of ferrite nanoprobes as a superior alternative to GBCAs for the early diagnosis of kidney damage.

Protein-Mediated Changes in Membrane Fluidity and Ordering: Insights into the Molecular Mechanism and Implications for Cellular Function

Probing protein-membrane interactions is vital for understanding biological functionality for various applications such as drug development, targeted drug delivery, and creation of functional biomaterials for medical and industrial purposes. In this study, we have investigated interaction of Human Serum Albumin (HSA) with two different lipids, dipalmitoylphosphatidylglycerol (dDPPG) and dipalmitoylphosphatidylcholine (dDPPC), using Vibrational Sum Frequency Generation spectroscopy at different membrane fluidity values. In the liquid-expanded (LE) state of the lipid, HSA (at pH 3.5) deeply intercalated lipid chains through a combination of electrostatic and hydrophobic interactions, which resulted in more ordering of the lipid chains. However, in the liquid-condensed (LC) state, protein intercalation is decreased due to tighter lipid packing. Moreover, our findings revealed distinct differences in HSA's interaction with dDPPG and dDPPC lipids. The interaction with dDPPC remained relatively weak compared to dDPPG. These results shed light on the significance of protein mediated changes in lipid characteristics, which hold considerable implications for understanding membrane protein behavior, lipid-mediated cellular processes, and lipid-based biomaterial design.

Medicinal Chemistry of Drugs with N-Oxide Functionalities

Molecules with N-oxide functionalities are omnipresent in nature and play an important role in Medicinal Chemistry. They are synthetic or biosynthetic intermediates, prodrugs, drugs, or polymers for applications in drug development and surface engineering. Typically, the N-oxide group is critical for biomedical applications of these molecules. It may provide water solubility or decrease membrane permeability or immunogenicity. In other cases, the N-oxide has a special redox reactivity which is important for drug targeting and/or cytotoxicity. Many of the underlying mechanisms have only recently been discovered, and the number of applications of N-oxides in the healthcare field is rapidly growing. This Perspective article gives a short summary of the properties of N-oxides and their synthesis. It also provides a discussion of current applications of N-oxides in the biomedical field and explains the basic molecular mechanisms responsible for their biological activity.

Facilely and efficiently constructing anti-oil-fouling zwitterionic coatings on membranes for oil-in-water emulsion separation

A facile and efficient strategy for constructing anti-oil-fouling zwitterionic coatings on membranes is developed. The resultant membrane exhibits excellent anti-oil-fouling ability even in a dry state, and has a high efficiency for emulsion separation with a high flux of 5800 L m-2 h-1 bar-1 and an oil rejection of up to 99.6%.

Ultrathin Water-Responsive Zwitterionic Hydrogel Brush Coatings for Long-Term Corrosion Protection

Preventing metal corrosion has usually been associated with water-repellent coatings that inhibit the penetration of aggressive chloride ions. Contrary to this conventional wisdom, we engineered ultrathin superhydrophilic zwitterionic hydrogel brushes rooted in a nanoporous anodic aluminum oxide (AAO) substrate that effectively hampered the adsorption of hydrated chloride ions (Cl-·H2O) on the Al alloy surface. The hydrogel brush coating enhanced corrosion resistance by 3 orders of magnitude, with corrosion current density declining from 1.518 to 1.567 × 10-3 μA cm-2. Despite suffering from long-term salt-spaying tests, zwitterionic hydrogel brush coating retained 2 orders of magnitude of corrosion resistance. Direct Raman spectroscopic evidence manifested that interfacial water comprised both highly ordered hydrogen-bonded water and disordered water containing hydrated Cl- ions. Under the hydration effect of zwitterionic hydrogel brushes, an interfacial disordered water structure dynamically transformed into a hydrogen-bonded water film. We correlated the structure and quantities of interfacial water with the corrosion current density and chloride adsorption. Hydrogen-bonded water improved by zwitterionic hydrogel brushes weakened the affinity and adsorption of hydrated Cl- ion water on the oxide film, resulting in excellent corrosion protection. Therefore, employing localized hydration tuning strategies, these findings are anticipated to generally empower ordered interfacial water to enhance metal corrosion resistance through precise interfacial engineering.

Diffusely Charged Polymeric Zwitterions as Loosely Hydrated Marine Antifouling Coatings

Polymeric zwitterions exhibit exceptional fouling resistance through the formation of a strongly hydrated surface of immobilized water molecules. While being extensively tested for their performance in biomedical, membrane, and, to a lesser extent, marine environments, few studies have investigated how the molecular design of the zwitterion may enhance its performance. Furthermore, while theories of zwitterion antifouling mechanisms exist for molecular-scale foulant species (e.g., proteins and small molecules), it remains unclear how molecular-scale mechanisms influence the micro- and macroscopic interactions of relevance for marine applications. The present study addresses these gaps through the use of a modular zwitterion chemistry platform, which is characterized by a combination of surface-sensitive sum frequency generation (SFG) vibrational spectroscopy and marine assays. Zwitterions with increasingly delocalized cations demonstrate improved fouling resistance against the green alga Ulva linza. SFG spectra correlate well with the assay results, suggesting that the more diffuse charges exhibit greater surface hydration with more bound water molecules. Hence, the number of bound interfacial water molecules appears to be more influential in determining the marine antifouling activities of zwitterionic polymers than the binding strength of individual water molecules at the interface.

Relationships between Water's Structure and Solute Affinity at Polypeptoid Brush Surfaces

Excellent antifouling surfaces are generally thought to create a tightly bound layer of water that resists solute adsorption, and highly hydrophilic surfaces such as those with zwitterionic functionalities are of significant current interest as antifoulant strategies. However, despite significant proofs-of-concept, we still lack a fundamental understanding of how the nanoscopic structure of this hydration layer translates to reduced fouling, how surface chemistry can be tuned to achieve antifouling through hydration water, and why, in particular, zwitterionic surfaces seem so promising. Here, we use molecular dynamics simulations and free energy calculations to investigate the molecular relationships among surface chemistry, hydration water structure, and surface-solute affinity across a variety of surface-decorated chemistries. Specifically, we consider polypeptoid-decorated surfaces that display well-known experimental antifouling capabilities and that can be synthesized sequence specifically, with precise backbone positioning of, e.g., charged groups. Through simulations, we calculate the affinities of a range of small solutes to polypeptoid brush surfaces of varied side-chain chemistries. We then demonstrate that measures of the structure of surface hydration water in response to a particular surface chemistry signal solute-surface affinity; specifically, we find that zwitterionic chemistries produce solute-surface repulsion through highly coordinated hydration water while suppressing tetrahedral structuring around the solute, in contrast to uncharged surfaces that show solute-surface affinity. Based on the relationship of this structural perturbation to the affinity of small-molecule solutes, we propose a molecular mechanism by which zwitterionic surface chemistries enhance solute repulsion, with broader implications for the design of antifouling surfaces.

Silane Effects on Adhesion Enhancement of 2K Polyurethane Adhesives

With excellent properties such as great flexibility, outstanding chemical resistance, and superb mechanical strength, two-part polyurethane (2K PU) adhesives have been widely applied in many applications, including those in transportation and construction. Despite the extensive use, their adhesion to nonpolar polymer substrates still needs to be improved and has been widely studied. The incorporation of silane molecules and the use of plasma treatment on substrate surfaces are two popular methods to increase the adhesion of 2K PU adhesives, but their detailed adhesion enhancement mechanisms are still largely unknown. In this research, sum frequency generation (SFG) vibrational spectroscopy was used to probe the influence of added or coated silanes on the interfacial structure at the buried polypropylene (PP)/2K PU adhesive interface in situ. How plasma treatment on PP could improve adhesion was also investigated. To achieve maximum adhesion, two methods to involve silanes were studied. In the first method, silanes were directly mixed with the 2K PU adhesive before use. In the second method, silane molecules were spin-coated onto the PP substrate before the PU adhesive applied. It was found that the first method could not improve the 2K PU adhesion to PP, while the second method could substantially enhance such adhesion. SFG studies demonstrated that with the second method silane molecules chemically reacted at the interface to connect PP and 2K PU adhesive to improve the adhesion. With the first method, silane molecules could not effectively diffuse to the interface to enhance adhesion. In this research, plasma treatment was also found to be a useful method to improve the adhesion of the 2K PU adhesive to nonpolar polymer materials.

Interfacial Water-Dictated Oil Adhesion Based on Ion Modulation

Oil adhesion on ionic surfaces is ubiquitous in organisms and natural environments and is generally determined by surface chemical component and texture. However, when adhesion occurs, water molecules at the solid-liquid interface, acting as a bridge not only influenced by the structure and composition of the solid surface but also interacting with the neighboring oil molecules, play a crucial role but are always overlooked. Herein, we investigate the oil adhesion process on a carboxyl-terminated self-assembled monolayer surface (COOH-SAM) in ionic solutions and observe the interfacial water structure via surface-enhanced Raman scattering (SERS) in this system. It is found that the lower the tetracoordinated water content, the stronger the oil adhesion. Compared to monovalent ions, the strengthened binding of multivalent ions to the COOH-SAM surface makes the interfacial water more disordered, which eventually leads to a stronger oil adhesion. Notably, the amount of oil adhesion decreases with an increase in the thickness of the interfacial water region. The interfacial water-dictated oil adhesion has been demonstrated in capillary to simulate the water-driven oil recovery, providing a molecular-level explanation for enhanced oil recovery from low salinity water flooding and also indicating potential applications in intelligent microfluidic and seawater desalination.

Strong and Tough Antifreezing Hydrogel Sensor via the Synergy of Coordination and Hydrogen Bonds

Hydrogel sensors are fascinating as flexible sensors and electronic skin due to their excellent biocompatibility and structure controllability. However, developing conductive hydrogels possessing both excellent mechanical and antifreezing properties for environmental-adaptive sensors remains a challenge. Herein, a strategy of combining betaine and metal ions to construct poly(acrylic acid) (PAA)-based high-conductive hydrogels has been reported. PAA-Al3+/betaine hydrogels with high toughness and antifreezing property were prepared by a one-step UV curing method. Their high toughness is attributed to the coordination of metal ions with the carboxylic groups in PAA, the interaction of betaine with PAA, and the formation of hydrogen bonds between them and water molecules. Moreover, the significant antifreezing property is due to the reduction of free water in the hydrogel. This, in turn, is attributed to the hydration of metal ions and the synergistic hydrogen bonding between betaine and water. The experiments demonstrate that the hydrogel has excellent mechanical property, high conductivity, superior transparency, antiswelling property, antipuncture as well as shape memory properties, and especially, low cytotoxicity. It can be used as a sensor for motion detection and information recognition. This work provides new insights into the application of flexible sensors and human-machine interfaces in multienvironmental conditions.

Antifouling Coatings from Glassy Polyelectrolyte Complex Films

Coatings that prevent or decrease fouling are sought for many applications, including those that inhibit the attachment of organisms in aquatic environments. To date, antifouling coatings have mostly followed design criteria assembled over decades: surfaces should be well/strongly hydrated, possess low net charge, and maintain a hydrophilic character when exposed to the location of use. Thus, polymers based on ethylene glycol or zwitterionic repeat units have been shown to be highly effective. Unfortunately, hydrated materials can be quite soft, limiting their use in some environments. In a major paradigm shift, this work describes glassy antifouling films made from certain complexes of positive and negative polyelectrolytes. The dense network of electrostatic interactions yields tough materials below the glass transition temperature, Tg, in normal use, while the highly ionic character of these polyelectrolyte complexes ensures strong hydration. The proximity of equal numbers of opposite charges within these complexes mimics zwitterionic structures. Films, assembled layer-by-layer from aqueous solutions, contained sulfonated poly(ether ether ketone), SPEEK, a rigid polyelectrolyte that binds strongly to a selection of quaternary ammonium polycations. Layer-by-layer buildup of SPEEK and polycations was linear, indicating strong complexes between polyelectrolytes. Calorimetry also showed that complex formation was exothermic. Surfaces coated with these films in the 100 nm thickness range completely resisted adhesion of the common flagellate green algae, Chlamydomonas reinhardtii, which were removed from surfaces at a minimum applied flow rate of 0.8 cm s-1. The total surface charge density of adsorbed cations, determined with a sensitive radioisotopic label, was very low, around 10% of a monolayer, which minimized adsorption driven by counterion release from the surface. The viscoelastic properties of the complexes, which were stable even in concentrated salt solutions, were explored using rheology of bulk samples. When fully hydrated, their Tg values were observed to be above 75 °C.

Thin continuous membrane coating with high surface energy for comprehensive antifouling seawater distillation

Membrane distillation (MD) has prominent advantages such as treating high-salinity wastewater with a low-grade thermal energy, high salt rejection, and zero discharge. However, organic fouling and mineral scaling are two major challenges for hydrophobic MD membranes when used for practical applications. Commonly, improving organic fouling- and mineral scaling-resistance require oppositely enhanced wetting properties of membrane, thus is difficult to simultaneously realize dual resistance with one membrane. Here, we proposed to use underwater thermodynamically stable high-surface-energy coating to modify the hydrophobic membrane with Janus structures comprising different surface energy. The underlayered structure meets the hydrophobicity requirements of the MD membrane, while the coating layer realizes dual resistance to organic and inorganic foulants. Theoretical analysis and experimental proof reveal that the membrane with the high-surface-energy coating layer outperforms the pristine one with approximately 10 times of longevity. This strategy provides a new way for the use of high-surface-energy materials in versatilely fouling-resistant MD process.

Supramolecular Self-Healing Antifouling Coating for Dental Materials

In orthodontic treatment, orthodontic appliances are prone to bacterial infections, which pose a risk to oral health. Surface modification of orthodontic appliances has been explored to improve their antifouling properties and impart antibacterial capabilities, inhibiting initial bacterial adhesion and biofilm formation. However, coatings are susceptible to damage in the complex oral environment, leading to a loss of functionality. Here, we have prepared an antifouling self-healing coating based on supramolecular bonding by employing a simple spin coating method. The presence of the hydrophilic zwitterionic trimethylamine N-oxide (TMAO) and the hydrophobic antimicrobial moieties triclosan acrylate (TCSA) imparts to the polymers an amphiphilic structure and enhances the interaction with bacteria, resulting in excellent antimicrobial activity and surface antifouling properties. The multiple hydrogen bonds of ureido-pyrimidinone methacrylate (UPyMA) and ionic interactions contained in the polymers not only increased the adhesion of the coating to the material substrate (approximately 3 times) but also endowed the coating with the intrinsic self-healing ability to restore the antibiofouling properties at oral temperature and humidity. Finally, the polymer coating is biologically safe both in vitro and in vivo, showing no cytotoxic effects on cells and tissues. This research offers a promising avenue for improving the performance of orthodontic appliances and contributes to the maintenance and treatment of oral health.

Antiadhesive Copolymers at Solid/Liquid Interfaces: Complementary Characterization of Polymer Adsorption and Protein Fouling by Sum Frequency Generation Vibrational Spectroscopy and Quartz-Crystal Microbalance Measurements with Dissipation Monitoring

Amphiphilic copolymers comprising hydrophilic segments of poly(ethylene glycol) and hydrophobic domains that are able to adhere to solid/liquid interfaces have proven to be versatile ingredients in formulated products for various types of applications. Recently, we have reported the successful synthesis of a copolymer designed for modifying the surface properties of polyesters as mimics for synthetic textiles. Using sum frequency generation (SFG) spectroscopy, it was shown that the newly developed copolymer adsorbs effectively on the targeted substrates even in the presence of surfactants as supplied by common detergents. In the present work, these studies were extended to evaluate the ability of the formed copolymer adlayers to passivate polyester surfaces against undesired deposition of bio(macro)molecules, as represented by fibrinogen as model protein foulants. In addition, SFG spectroscopy was used to elucidate the structure of fibrinogen at the interface between polyester and water. To complement the obtained data with an independent technique, analogous experiments were performed using quartz-crystal microbalance with dissipation monitoring for the detection of the relevant interfacial processes. Both methods give consistent results and deliver a holistic picture of brush copolymer adsorption on polyester surfaces and subsequent antiadhesive effects against proteins under different conditions representing the targeted application in home care products.

DPA-Zinc around Polyplexes Acts Like PEG to Reduce Protein Binding While Targeting Cancer Cells

Gene therapy holds great promise as an effective treatment for many diseases of genetic origin. Gene therapy works by employing cationic polymers, liposomes, and nanoparticles to condense DNA into polyplexes via electronic interactions. Then, a therapeutic gene is introduced into target cells, thereby restoring or changing cellular function. However, gene transfection efficiency remains low in vivo due to high protein binding, poor targeting ability, and substantial endosomal entrapment. Artificial sheaths containing PEG, anions, or zwitterions can be introduced onto the surface of gene carriers to prevent interaction with proteins; however, they reduce the cellular uptake efficacy, endosomal escape, targeting ability, thereby, lowering gene transfection. Here, it is reported that linking dipicolylamine-zinc (DPA-Zn) ions onto polyplex nanoparticles can produce a strong hydration water layer around the polyplex, mimicking the function of PEGylation to reduce protein binding while targeting cancer cells, augmenting cellular uptake and endosomal escape. The polyplexes with a strong hydration water layer on the surface can achieve a high gene transfection even in a 50% serum environment. This strategy provides a new solution for preventing protein adsorption while improving cellular uptake and endosomal escape.

Hydration behaviors of nonfouling zwitterionic materials

Zwitterionic materials have emerged as highly effective ultralow fouling materials for many applications, however the underlying mechanism of fouling resistance remains unclear. Using ab initio molecular dynamics simulations and surface-sensitive sum frequency generation vibrational spectroscopy, we studied the hydration behaviors of zwitterionic materials, including trimethylamine-N-oxide (TMAO) and carboxybetaines of different charge-separation distances, to understand their fouling-resistant mechanism and provide a design principle for improved performance. Our study reveals that the interplay among hydrogen bonding, net charge, and dipole moment is crucial to the fouling-resistant capabilities of zwitterionic materials. Shortening of the zwitterionic spacing strengthens hydrogen bonding with water against biomolecule attachment due to the increased electrostatic and induction interactions, charge transfer, and improved structural stability. Moreover, the shortened charge separation reduces the dipole moment of zwitterionic materials with an intrinsic near-neutral net charge, decreasing their electrostatic and dipole-dipole interactions with biofoulers, and increasing their resistance to fouling. Compared to carboxybetaine compounds, TMAO has the shortest zwitterionic spacing and exhibits the strongest hydrogen bonding, the smallest net charge, and the minimum dipole moment, making it an excellent nonfouling material.

Modular Design for Proteins Assembling into Antifouling Coatings: Case of Gold Surfaces

We analyze modularity for a B-M-E triblock protein designed to self-assemble into antifouling coatings. Previously, we have shown that the design performs well on silica surfaces when B is taken to be a silica-binding peptide, M is a thermostable trimer domain, and E is the uncharged elastin-like polypeptide (ELP), E = (GSGVP)₄₀. Here, we demonstrate that we can modulate the nature of the substrate on which the coatings form by choosing different solid-binding peptides as binding domain B and that we can modulate antifouling properties by choosing a different hydrophilic block E. Specifically, to arrive at antifouling coatings for gold surfaces, as binding block B we use the gold-binding peptide GBP1 (with the sequence MHGKTQATSGTIQS), while we replace the antifouling blocks E by zwitterionic ELPs of different lengths, E^Z_n = (GDGVP-GKGVP)_n/2, with n = 20, 40, or 80. We find that even the B-M-E proteins with the shortest E blocks make coatings on gold surfaces with excellent antifouling against 1% human serum (HS) and reasonable antifouling against 10% HS. This suggests that the B-M-E triblock protein can be easily adapted to form antifouling coatings on any substrate for which solid-binding peptide sequences are available.

Bioinspired N-Oxide-Based Zwitterionic Polymer Brushes for Robust Fouling-Resistant Surfaces

Fouling-resistant surfaces are needed for various environmental applications. Inspired by superhydrophilic N-oxide-based osmolytes in saltwater fish, we demonstrate the use of a trimethylamine N-oxide (TMAO) analogue for constructing fouling-resistant surfaces. The readily synthesized N-oxide monomer of methacrylamide is grafted to filtration membrane surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP). Successful grafting of the amine N-oxide brush layer as confirmed by material characterization endows the surface with increased hydrophilicity, reduced charge, and decreased roughness. Notably, the introduction of the N-oxide layer does not compromise transport properties, i.e., water permeability and water-salt selectivity. Moreover, the modified membrane exhibits improved antifouling properties with a lower flux decline (32.1%) and greater fouling reversibility (18.55%) than the control sample (45.4% flux decline and 3.26% fouling reversibility). We further evaluate foulant-membrane interaction using surface plasmon resonance (SPR) to relate the reduced fouling tendency to the synergic effects of surface characteristic changes after amine N-oxide modification. Our results demonstrate the promise and potential of the N-oxide-based polymer brushes for the design of fouling resistance surfaces for a variety of emerging environmental applications.

Prediction of zwitterion hydration and ion association properties using machine learning

Molecular dynamics simulations were performed to study the hydration and ion association properties of a library of zwitterionic molecules with varying charged moieties and spacer chemistries in pure water and with Na⁺ and Cl^- ions. The structure and dynamics of associations were calculated using the radial distribution and residence time correlation function. Resulting association properties are used as target variables for a machine learning model, with cheminformatic descriptors of the molecule subunits used as descriptors. Prediction of hydration properties revealed that steric and hydrogen bonding descriptors were of greatest importance and there was influence from the cationic moiety on the anionic moiety hydration properties. Ion association properties prediction performed poorly, which is attributed to the role of hydration layers in ion association dynamics. This study is the first to quantitatively describe the influence of subunit chemistry on hydration and ion association properties of zwitterions. These quantitative descriptions supplement prior studies of zwitterion association and previously described design principles.

Determination of protein conformation and orientation at buried solid/liquid interfaces

Protein structures at solid/liquid interfaces mediate interfacial protein functions, which are important for many applications. It is difficult to probe interfacial protein structures at buried solid/liquid interfaces in situ at the molecular level. Here, a systematic methodology to determine protein molecular structures (orientation and conformation) at buried solid/liquid interfaces in situ was successfully developed with a combined approach using a nonlinear optical spectroscopic technique - sum frequency generation (SFG) vibrational spectroscopy, isotope labeling, spectra calculation, and computer simulation. With this approach, molecular structures of protein GB1 and its mutant (with two amino acids mutated) were investigated at the polymer/solution interface. Markedly different orientations and similar (but not identical) conformations of the wild-type protein GB1 and its mutant at the interface were detected, due to the varied molecular interfacial interactions. This systematic strategy is general and can be widely used to elucidate protein structures at buried interfaces in situ.

Hidden hydrophobicity impacts polymer immunogenicity

Antibodies against poly(ethylene glycol) (PEG) have been found to be the culprit of side reactions and efficacy loss of a number of PEGylated drugs. Fundamental mechanisms of PEG immunogenicity and design principles for PEG alternatives still have not been fully explored. By using hydrophobic interaction chromatography (HIC) under varied salt conditions, we reveal the "hidden" hydrophobicity of those polymers which are generally considered as hydrophilic. A correlation between the hidden hydrophobicity of a polymer and its polymer immunogenicity is observed when this polymer is conjugated with an immunogenic protein. Such a correlation of hidden hydrophobicity vs. immunogenicity for a polymer also applies to corresponding polymer-protein conjugates. Atomistic molecular dynamics (MD) simulation results show a similar trend. Based on polyzwitterion modification and with this HIC technique, we are able to produce extremely low-immunogenic protein conjugates as their hydrophilicity is pushed to the limit and their hydrophobicity is eliminated, breaking the current barriers of eliminating anti-drug and anti-polymer antibodies.

Bionic Engineered Protein Coating Boosting Anti-Biofouling in Complex Biological Fluids

Implantable medical devices have been widely applied in diagnostics, therapeutics, organ restoration, and other biomedical areas, but often suffer from dysfunction and infections due to irreversible biofouling. Inspired by the self-defensive "vine-thorn" structure of climbing thorny plants, a zwitterion-conjugated protein is engineered via grafting sulfobetaine methacrylate (SBMA) segments on native bovine serum albumin (BSA) protein molecules for surface coating and antifouling applications in complex biological fluids. Unlike traditional synthetic polymers of which the coating operation requires arduous surface pretreatments, the engineered protein BSA@PSBMA (PolySBMA conjugated BSA) can achieve facile and surface-independent coating on various substrates through a simple dipping/spraying method. Interfacial molecular force measurements and adsorption tests demonstrate that the substrate-foulant attraction is significantly suppressed due to strong interfacial hydration and steric repulsion of the bionic structure of BSA@PSBMA, enabling coating surfaces to exhibit superior resistance to biofouling for a broad spectrum of species including proteins, metabolites, cells, and biofluids under various biological conditions. This work provides an innovative paradigm of using native proteins to generate engineered proteins with extraordinary antifouling capability and desired surface properties for bioengineering applications.

Hypoxia-Triggered Bioreduction of Poly(N-oxide)-Drug Conjugates Enhances Tumor Penetration and Antitumor Efficacy

PEGylation prolongs the blood circulation time of drugs; however, it simultaneously reduces the tumor penetration of drugs due to the nonfouling function and bulky hydrodynamic volume of PEG, leading to unsatisfactory outcomes in the treatment of solid tumors. Herein, we report the in situ growth of a bioreducible polymer of poly(N-oxide) from an important protein drug of interferon alpha (IFN) to generate site-specific IFN-poly(N-oxide) conjugates with higher bioactivity than a clinically used PEGylated IFN of PEGASYS. An IFN-poly(N-oxide) conjugate is screened out to have a circulating half-life as long as 51 h, which is similar to that of PEGASYS but 96-fold greater than that of IFN. However, the conjugate greatly outperforms PEGASYS and IFN in tumor penetration and antitumor efficacy in mice bearing melanoma. This enhanced tumor penetration is ascribed to the adsorption-mediated transcytosis of the conjugate whose poly(N-oxide) is biologically reduced into poly(tertiary amine), under hypoxia, which can be further protonated in the acidic tumor microenvironment. These novel findings demonstrate that poly(N-oxide)s are not only long-circulating but also bioreducible under hypoxia and are of great promise as next-generation carriers to deliver drugs into the interior of solid tumors to enhance their antitumor efficacy.

N-Oxide Zwitterion Functionalized Positively Charged Polyamide Composite Membranes for Nanofiltration

N-Oxide zwitterionic polyethyleneimine (ZPEI), a new kind of aqueous phase monomer synthesized by commercially branched polyethyleneimine (PEI) via oxidation reaction, was prepared for fabrication of thin-film composite (TFC) polyamide membranes via interfacial polymerization. The main factors, including the monomer concentration and immersion time of the aqueous phase and organic phase, were investigated. Compared with PEI-TFC membranes, the obtained optimal defect-free ZPEI-TFC membranes exhibited a lower roughness (3.3 ± 0.3 nm), a better surface hydrophilicity, and a smaller pore size (238 Da of MWCO). The positively charged ZPEI-TFC membranes (isoelectric point at pH 8.05) showed higher rejections toward both divalent cationic (MgCl₂, 93.0%) and anionic (Na₂SO₄, 96.1%) salts with a water permeation flux of up to 81.0 L·m^-2·h^-1 at 6 bar, which surpassed currently reported membranes. More importantly, mainly owing to N-oxide zwitterion with strong hydration capability, ZPEI-TFC membranes displayed a high flux recovery ratio (97.0%) toward a model protein contaminant (bovine serum albumin), indicating good anti-fouling properties. Therefore, the novel N-oxide zwitterion functionalized positively charged nanofiltration membranes provide an alternative for water desalination and sewage reclamation.

Thermoresponsive Self-Healing Zwitterionic Hydrogel as an In Situ Gelling Wound Dressing for Rapid Wound Healing

It is highly desired yet challenging to fabricate biocompatible injectable self-healing hydrogels with anti-bacterial adhesion properties for complex wounds that can autonomously adapt to different shapes and depths and can promote angiogenesis and dermal collagen synthesis for rapid wound healing. Herein, an injectable zwitterionic hydrogel with excellent self-healing property, good cytocompatibility, and antibacterial adhesion was developed from a thermoresponsive ABA triblock copolymer poly[(N-isopropyl acrylamide)-co-(butyl acrylate)-co-(sulfobetaine methacrylate)]-b-poly(ethylene glycol)-b-poly[(N-isopropyl acrylamide)-co-(butyl acrylate)-co-(sulfobetaine methacrylate)] (PZOPZ). The prepared PZOPZ hydrogel exhibits a distinct thermal-induced sol-gel transition around physiological temperature and could be easily applied in a sol state and in situ gelled to adapt complex wounds of different shapes and depths for complete coverage. Meanwhile, the hydrogel possesses a rapid self-healing ability and can recover autonomously from damage to maintain structural and functional integrity. In addition, the CCK-8 and 2D/3D cell culture experiments revealed that the PZOPZ hydrogel dressing shows low cytotoxicity to L929 cells and can effectively prevent the adhesion of Staphylococcus aureus and Escherichia coli. In vivo investigations verified that the PZOPZ hydrogel could increase angiogenesis and dermal collagen synthesis and shorten the transition from the inflammatory to the proliferative stage, thereby providing more favorable conditions for faster wound healing. Overall, this work provides a promising strategy to develop injectable zwitterionic hydrogel dressings with multiple functions for clinic wound management.

Zwitterionic Biomaterials

The term "zwitterionic polymers" refers to polymers that bear a pair of oppositely charged groups in their repeating units. When these oppositely charged groups are equally distributed at the molecular level, the molecules exhibit an overall neutral charge with a strong hydration effect via ionic solvation. The strong hydration effect constitutes the foundation of a series of exceptional properties of zwitterionic materials, including resistance to protein adsorption, lubrication at interfaces, promotion of protein stabilities, antifreezing in solutions, etc. As a result, zwitterionic materials have drawn great attention in biomedical and engineering applications in recent years. In this review, we give a comprehensive and panoramic overview of zwitterionic materials, covering the fundamentals of hydration and nonfouling behaviors, different types of zwitterionic surfaces and polymers, and their biomedical applications.

Anti-Fouling, Adhesive Polyzwitterionic Hydrogel Electrodes Toughened Using a Tannic Acid Nanoflower

Conductive polyzwitterionic hydrogels with good adhesion properties show potential prospect in implantable electrodes and electronic devices. Adhesive property of polyzwitterionic hydrogels in humid environments can be improved by the introduction of catechol groups. However, common catechol modifiers can usually quench free radicals, resulting in a contradiction between long-term tissue adhesion and hydrogel toughness. By adding tannic acid (TA) to the dispersion of clay nanosheets and nanofibers, we designed TA-coated nanoflowers and nanofibers as the reinforcing phase to prepare polyzwitterionic hydrogels with adhesion properties. The hydrogel combines the mussel-like and zwitterionic co-adhesive mechanism to maintain long-term adhesion in underwater environments. In particular, the noncovalent cross-linking provided by the nanoflower structure effectively compensates for the defects caused by free-radical quenching so that the hydrogel obtained a high stretchability of over 2900% and a toughness of 1.16 J/m³. The hydrogel also has excellent anti-biofouling property and shows resistance to bacteria and cells. In addition, the hydrogel possesses a low modulus (<10 kPa) and ionic conductivity (0.25 S/m), making it an ideal material for the preparation of implantable electrodes.

Probing Molecular Interactions of Antibody Drugs, Silicone Oil, and Surfactant at Buried Interfaces In Situ

Antibody drugs have been rapidly developed to cure many diseases including COVID-19 infection. Silicone oil is commonly used as a lubricant coating material for devices used in the pharmaceutical industry to store and administer antibody drug formulations. However, the interaction between silicone oil and antibody molecules could lead to the adsorption, denaturation, and aggregation of antibody molecules, impacting the efficacy of antibody drugs. Here, we studied the molecular interactions between antibodies and silicone oil in situ in real time. The effect of the surfactant on such interactions was also investigated. Specifically, the adsorption dynamics of a bispecific antibody (BsAb) onto a silicone oil surface without and with different concentrations of the surfactant PS80 in antibody solutions were monitored. Also the possible lowest effective PS80 concentrations that can prevent the adsorption of BsAb as well as a monoclonal antibody (mAb) onto silicone oil were measured. It was found that different concentrations of PS80 are required for preventing the adsorption of different antibodies. Both BsAB and mAB denature on silicone oil without a surfactant. However, for a low surfactant concentration in the solution, although the surfactant could not completely prevent the antibody from adsorption, it could maintain the native structures of adsorbed BsAb and mAb antibodies on silicone oil. This is important knowledge, showing that to prevent antibody aggregation on silicone oil it is not necessary to add surfactant to a concentration high enough to completely minimize protein adsorption.

Bottlebrush inspired injectable hydrogel for rapid prevention of postoperative and recurrent adhesion

Postsurgical adhesion is a common clinic disease induced by surgical trauma, accompanying serious subsequent complications. Current non-surgical approaches of drugs treatment and biomaterial barrier administration only show limited prevention effects and couldn't effectively promote peritoneum repair. Herein, inspired by bottlebrush, a novel self-fused, antifouling, and injectable hydrogel is fabricated by the free-radical polymerization in aqueous solution between the methacrylate hyaluronic acid (HA-GMA) and N-(2-hydroxypropyl) methacrylamide (HPMA) monomer without any chemical crosslinkers, termed as H-HPMA hydrogel. The H-HPMA hydrogel can be tuned to perform excellent self-fused properties and suitable abdominal metabolism time. Intriguingly, the introduction of the ultra-hydrophilic HPMA chains to the H-HPMA hydrogel affords an unprecedented antifouling capability. The HPMA chains establish a dense hydrated layer that rapidly prevents the postsurgical adhesions and recurrent adhesions after adhesiolysis in vivo. The H-HPMA hydrogel can repair the peritoneal wound of the rat model within 5 days. Furthermore, an underlying mechanism study reveals that the H-HPMA hydrogel significantly regulated the mesothelial-to-mesenchymal transition (MMT) process dominated by the TGF-β-Smad2/3 signal pathway. Thus, we developed a simple, effective, and available approach to rapidly promote peritoneum regeneration and prevent peritoneal adhesion and adhesion recurrence after adhesiolysis, offering novel design ideas for developing biomaterials to prevent peritoneal adhesion.

Graph Clustering Analyses of Discontinuous Molecular Dynamics Simulations: Study of Lysozyme Adsorption on a Graphene Surface

Understanding the interfacial behaviors of biomolecules is crucial to applications in biomaterials and nanoparticle-based biosensing technologies. In this work, we utilized autoencoder-based graph clustering to analyze discontinuous molecular dynamics (DMD) simulations of lysozyme adsorption on a graphene surface. Our high-throughput DMD simulations integrated with a Go̅-like protein-surface interaction model makes it possible to explore protein adsorption at a large temporal scale with sufficient accuracy. The graph autoencoder extracts a low-dimensional feature vector from a contact map. The sequence of the extracted feature vectors is then clustered, and thus the evolution of the protein molecule structure in the absorption process is segmented into stages. Our study demonstrated that the residue-surface hydrophobic interactions and the π-π stacking interactions play key roles in the five-stage adsorption. Upon adsorption, the tertiary structure of lysozyme collapsed, and the secondary structure was also affected. The folding stages obtained by autoencoder-based graph clustering were consistent with detailed analyses of the protein structure. The combination of machine learning analysis and efficient DMD simulations developed in this work could be an important tool to study biomolecules' interfacial behaviors.

Zwitterionic Polypeptoids: A Promising Class of Antifouling Bioinspired Materials

Biofouling caused by protein adsorption and microbial colonization remains a great challenge in many applications. In this work, we synthesized a new type of zwitterionic polypeptoid containing carboxybetaine (CB) moieties (PeptoidCB) through thiol–ene chemistry of poly(N-allylglycine) (PNAG). The zwitterionic antifouling hydrogel was subsequently prepared by co-mixing PeptoidCB with agarose, which exhibited excellent resistance to non-specific protein adsorption and bacterial adhesion. Further, PeptoidCB-modified block copolypeptoids with amphiphilic structure were synthesized to form nanoparticles in an aqueous solution with neglected protein adsorption. The ability of PeptoidCB to resist non-specific protein adsorption and bacterial adhesion makes it a promising candidate for biomedical and industrial applications.

Polycarboxybetaine-Based Hydrogels for the Capture and Release of Circulating Tumor Cells

Circulating tumor cells (CTCs) are indicators for the detection, diagnosis, and monitoring of cancers and offer biological information for the development of personalized medicine. Techniques for the specific capture and non-destructive release of CTCs from millions of blood cells remain highly desirable. Here, we present a CTC capture-and-release system using a disulfide-containing poly(carboxybetaine methacrylate) (pCB) hydrogel. The non-fouling characteristic of pCB prevents unwanted, nonspecific cell binding, while the carboxyl functionality of pCB is used for the conjugation of anti-epithelial cell adhesion molecule (anti-EpCAM) antibodies for the capture of CTCs. The results demonstrated that the anti-EpCAM-conjugated pCB hydrogel captured HCT116 cells from blood, and the capture ratio reached 45%. Furthermore, the captured HCT116 cells were released within 30 min from the dissolution of the pCB hydrogel by adding cysteine, which breaks the disulfide bonds of the crosslinkers. The cells released were viable and able to grow. Our system has potential in the development of a device for CTC diagnosis.

Zwitterionic Conducting Polymers: From Molecular Design, Surface Modification, and Interfacial Phenomenon to Biomedical Applications

Conducting polymers (CPs) have gained attention as electrode materials in bioengineering mainly because of their mechanical softness compared to conventional inorganic materials. To achieve better performance and broaden bioelectronics applications, the surface modification of soft zwitterionic polymers with antifouling properties represents a facile approach to preventing unwanted nonspecific protein adsorption and improving biocompatibility. This feature article emphasizes the antifouling properties of zwitterionic CPs, accompanied by their molecular synthesis and surface modification methods and an analysis of the interfacial phenomenon. Herein, commonly used methods for zwitterionic functionalization on CPs are introduced, including the synthesis of zwitterionic moieties on CP molecules and postsurface modification, such as the grafting of zwitterionic polymer brushes. To analyze the chain conformation, the structure of bound water in the vicinity of zwitterionic CPs and biomolecule behavior, such as protein adsorption or cell adhesion, provide critical insights into the antifouling properties. Integrating these characterization techniques offers general guidelines and paves the way for designing new zwitterionic CPs for advanced biomedical applications. Recent advances in newly designed zwitterionic CP-based electrodes have demonstrated outstanding potential in modern biomedical applications.

Theory-Guided Design of a Method to Obtain Competitive Balance between U(VI) Adsorption and Swaying Zwitterion-Induced Fouling Resistance on Natural Hemp Fibers

The competitive balance between uranium (VI) (U(VI)) adsorption and fouling resistance is of great significance in guaranteeing the full potential of U(VI) adsorbents in seawater, and it is faced with insufficient research. To fill the gap in this field, a molecular dynamics (MD) simulation was employed to explore the influence and to guide the design of mass-produced natural hemp fibers (HFs). Sulfobetaine (SB)- and carboxybetaine (CB)-type zwitterions containing soft side chains were constructed beside amidoxime (AO) groups on HFs (HFAS and HFAC) to form a hydration layer based on the terminal hydrophilic groups. The soft side chains were swayed by waves to form a hydration-layer area with fouling resistance and to simultaneously expel water molecules surrounding the AO groups. HFAS exhibited greater antifouling properties than that of HFAO and HFAC. The U(VI) adsorption capacity of HFAS was almost 10 times higher than that of HFAO, and the max mass rate of U:V was 4.3 after 35 days of immersion in marine water. This paper offers a theory-guided design of a method to the competitive balance between zwitterion-induced fouling resistance and seawater U(VI) adsorption on natural materials.

Molecular Dynamics Study on Properties of Hydration Layers above Polymer Antifouling Membranes

Zwitterionic polymers as crucial antifouling materials exhibit excellent antifouling performance due to their strong hydration ability. The structure−property relationship at the molecular level still remains to be elucidated. In this work, the surface hydration ability of three antifouling polymer membranes grafting on polysiloxane membranes Poly(sulfobetaine methacrylate) (T4-SB), poly(3-(methacryloyloxy)propane-1-sulfonate) (T4-SP), and poly(2-(dimethylamino)ethyl methacrylate) (T4-DM) was investigated. An orderly packed, and tightly bound surface hydration layer above T4-SP and T4-SB antifouling membranes was found by means of analyzing the dipole orientation distribution, diffusion coefficient, and average residence time. To further understand the surface hydration ability of three antifouling membranes, the surface structure, density profile, roughness, and area percentage of hydrophilic surface combining electrostatic potential, RDFs, SDFs, and noncovalent interactions of three polymers’ monomers were studied. It was concluded that the broadest distribution of electrostatic potential on the surface and the nature of anionic SO3- groups led to the following antifouling order of T4-SB > T4-SP > T4-DM. We hope that this work will gain some insight for the rational design and optimization of ecofriendly antifouling materials.