Molybdenum-Catalyzed Asymmetric Hydrogenation of Fused Arenes and Heteroarenes

Molybdenum-catalyzed hydrogenation of carbon dioxide, bicarbonate, and inorganic carbonates to formates

Herein, we report the hydrogenation of carbon dioxide to sodium formate catalyzed by low-valent molybdenum phosphine complexes. The 1,3-bis(diphenylphosphino)propane (DPPP)-based Mo complex was found to be an efficient catalyst in the presence of NaOH affording formate with a TON of 975 at 130 °C in THF/H2O after 24 h utilizing 40 bar (CO2 : H2 = 10 : 30) pressure. The complex was also active in the hydrogenation of sodium bicarbonate and inorganic carbonates to the corresponding formates. Mechanistic investigation revealed that the reaction proceeded via an intermediate formato complex.

Manganese-catalyzed Efficient Synthesis of N-heterocycles and Aminoketones Using Glycerol as a C3 Synthon

Glycerol is one of the important biomass-derived feedstocks and the high-value utilizations of glycerol have attracted much attentions in recent years. Herein, we report a manganese catalyzed dehydrogenative coupling of glycerol with amines for the synthesis of substituted 2-methylquinoxalines, 2-ethylbenzimidazoles, and α-aminoketones without any external oxidant. In these reactions, NHC-based pincer manganese complex featuring a pyridine backbone displayed high catalytic activity and selectivity, in which hydrogen and water were produced as the only by-products using glycerol as a C3 synthon.

Chemoselective Heterogeneous Hydrogenation of Sulfur Containing Quinolines under Mild Conditions

Sulfur, alongside oxygen and nitrogen, holds a prominent position as one of the key heteroatoms in nature and medicinal chemistry. Its significance stems from its ability to adopt different oxidation states, rendering it valuable as both a polarity handle and a hydrogen bond donor/acceptor. Nevertheless, the poisonous nature of its free electron pairs makes sulfur containing substrates inaccessible for many catalytic protocols. Strong and (at low temperatures) irreversible chemisorption to the catalyst's surface is in particular detrimental for heterogeneous catalysts, possessing only few catalytically active sites. Herein, we present a novel heterogeneous Ru-S catalyst that tolerates multiple sulfur functionalities, including thioethers, thiophenes, sulfoxides, sulfones, sulfonamides, and sulfoximines, in the hydrogenation of quinolines. The utility of the products was further demonstrated by subsequent diversifications of the sulfur functionalities.

Broad Survey of Selectivity in the Heterogeneous Hydrogenation of Heterocycles

A broad survey of heterogeneous hydrogenation catalysts has been conducted for the reduction of heterocycles commonly found in pharmaceuticals. The comparative reactivity of these substrates is reported as a function of catalyst, temperature, and hydrogen pressure. This analysis provided several catalysts with complementary reactivity between substrates. We then explored a series of bisheterocyclic substrates that provided an intramolecular competition of heterocycle hydrogenation reactivity. In several cases, complete selectivity could be achieved for reduction of one heterocycle and isolated yields are reported. A general trend in reactivity is inferred in which quinoline is the most reactive, followed by pyrazine, then pyrrole and with pyridine being the least reactive.

Catalytic hydrogenation of olefins by a multifunctional molybdenum-sulfur complex

Exploration of molybdenum complexes as homogeneous hydrogenation catalysts has garnered significant attention, but hydrogenation of unactivated olefins under mild conditions are scarce. Here, we report the synthesis of a molybdenum complex, [Cp*Mo(Ph2PC6H4S-CH = CH2)(Py)]+ (2), which exhibits intriguing reactivity toward C2H2 and H2 under ambient pressure. This vinylthioether complex showcases efficient catalytic activity in the hydrogenation of various aromatic and aliphatic alkenes, demonstrating a broad substrate scope without the need for any additives. The catalytic pathway involves an uncommon oxidative addition of H2 to the cationic Mo(II) center, resulting in a Mo(IV) dihydride intermediate. Moreover, complex 2 also shows catalytic activity toward C2H2, leading to the production of polyacetylene and the extension of the vinylthioether ligand into a pendant triene chain.

%VBur index and steric maps: from predictive catalysis to machine learning

Steric indices are parameters used in chemistry to describe the spatial arrangement of atoms or groups of atoms in molecules. They are important in determining the reactivity, stability, and physical properties of chemical compounds. One commonly used steric index is the steric hindrance, which refers to the obstruction or hindrance of movement in a molecule caused by bulky substituents or functional groups. Steric hindrance can affect the reactivity of a molecule by altering the accessibility of its reactive sites and influencing the geometry of its transition states. Notably, the Tolman cone angle and %VBur are prominent among these indices. Actually, steric effects can also be described using the concept of steric bulk, which refers to the space occupied by a molecule or functional group. Steric bulk can affect the solubility, melting point, boiling point, and viscosity of a substance. Even though electronic indices are more widely used, they have certain drawbacks that might shift preferences towards others. They present a higher computational cost, and often, the weight of electronics in correlation with chemical properties, e.g. binding energies, falls short in comparison to %VBur. However, it is worth noting that this may be because the steric index inherently captures part of the electronic content. Overall, steric indices play an important role in understanding the behaviour of chemical compounds and can be used to predict their reactivity, stability, and physical properties. Predictive chemistry is an approach to chemical research that uses computational methods to anticipate the properties and behaviour of these compounds and reactions, facilitating the design of new compounds and reactivities. Within this domain, predictive catalysis specifically targets the prediction of the performance and behaviour of catalysts. Ultimately, the goal is to identify new catalysts with optimal properties, leading to chemical processes that are both more efficient and sustainable. In this framework, %VBur can be a key metric for deepening our understanding of catalysis, emphasizing predictive catalysis and sustainability. Those latter concepts are needed to direct our efforts toward identifying the optimal catalyst for any reaction, minimizing waste, and reducing experimental efforts while maximizing the efficacy of the computational methods.

Advances in Group VI Metal-Catalyzed Homogeneous Hydrogenation and Dehydrogenation Reactions

Transition metal-catalyzed homogeneous hydrogenation and dehydrogenation reactions for attaining plethora of organic scaffolds have evolved as a key domain of research in academia and industry. These protocols are atom-economic, greener, in line with the goal of sustainability, eventually pave the way for numerous novel environmentally benign methodologies. Appealing progress has been achieved in the realm of homogeneous catalysis utilizing noble metals. Owing to their high cost, less abundance along with toxicity issues led the scientific community to search for sustainable alternatives. In this context, earth- abundant base metals have gained substantial attention culminating enormous progress in recent years, predominantly with pincer-type complexes of nickel, cobalt, iron, and manganese. In this regard, group VI chromium, molybdenum and tungsten complexes have been overlooked and remain underdeveloped despite their earth-abundance and bio-compatibility. This review delineates a comprehensive overview in the arena of homogeneously catalysed (de)hydrogenation reactions using group VI base metals chromium, molybdenum, and tungsten till date. Various reactions have been described; hydrogenation, transfer hydrogenation, dehydrogenation, acceptorless dehydrogenative coupling, hydrogen auto transfer, along with their scope and brief mechanistic insights.

Chemoselective Quinoline and Isoquinoline Reduction by Energy Transfer Catalysis Enabled Hydrogen Atom Transfer

(Hetero)arene reduction is one of the key avenues for synthesizing related cyclic alkenes and alkanes. While catalytic hydrogenation and Birch reduction are the two broadly utilized approaches for (hetero)arene reduction across academia and industry over the last century, both methods have encountered significant chemoselectivity challenges. We hereby introduce a highly chemoselective quinoline and isoquinoline reduction protocol operating through selective energy transfer (EnT) catalysis, which enables subsequent hydrogen atom transfer (HAT). The design of this protocol bypasses the conventional metric of reduction reaction, that is, the reductive potential, and instead relies on the triplet energies of the chemical moieties and the kinetic barriers of energy and hydrogen atom transfer events. Many reducing labile functional groups, which were incompatible with previous (hetero)arene reduction reactions, are retained in this reaction. We anticipate that this protocol will trigger the further advancement of chemoselective arene reduction and enable the current arene-rich drug space to escape from flatland.

Arene Insertion with Pincer-Supported Molybdenum-Hydrides: Determination of Site Selectivity, Relative Rates, and Arene Complex Formation

The synthesis of phosphino(oxazoline)pyridine-supported molybdenum(0) cycloocta-1,5-diene complexes is described. Exposure of these complexes to dihydrogen in the presence of an arene resulted in insertion of the substrate into the molybdenum hydride bond and afforded the corresponding molybdenum cyclohexadienyl hydrides. For mono- and disubstituted arenes, the site selectivity for insertion of the most substituted bond increases with increasing size of the substituent from methyl to ethyl, iso-propyl, and tert-butyl. In contrast, 1,3,5-trisubstituted arenes underwent insertion with exclusive site selectivity. Relative rates of insertion were determined by competition experiments and established faster insertions for electron-rich arenes. Introduction of electron-withdrawing trifluoromethyl groups on the arene resulted in decreased relative rates of insertion and an increased rate for H2 reductive elimination, favoring formation of the corresponding molybdenum η6-arene complex. Studies on the reductive elimination of the cyclohexadienyl ligand with the hydride enabled the synthesis of an enantioenriched cyclohexa-1,3-diene. This study provides new insights into the ligand requirements for catalytic arene hydrogenation and a new strategy for selective arene reduction.

Expanding the Utility of β-Diketiminate Ligands in Heavy Group VI Chemistry of Molybdenum and Tungsten

We report the synthesis of 17 molybdenum and tungsten complexes supported by the ubiquitous BDI ligand framework (BDI = β-diketiminate). The focal entry point is the synthesis of four molybdenum and tungsten(V) BDI complexes of the general formula [MO(BDI^R)Cl₂] [M = Mo, R = Dipp (1); M = W, R = Dipp (2); M = Mo, R = Mes (3); M = W, R = Mes (4)] synthesized by the reaction between MoOCl₃(THF)₂ or WOCl₃(THF)₂ and LiBDI^R. Reactivity studies show that the BDI^Dipp complexes are excellent precursors toward adduct formation, reacting smoothly with dimethylaminopyridine (DMAP) and triethylphosphine oxide (OPEt₃). No reaction with small phosphines has been observed, strongly contrasting the chemistry of previously reported rhenium(V) complexes. Additionally, the complexes 1 and 2 are good precursors for salt metathesis reactions. While 1 can be chemically reduced to the first stable example of a Mo(IV) BDI complex 15, reduction of 2 resulted in degradation of the BDI ligand via a nitrene transfer reaction, leading to MAD (4-((2,6-diisopropylphenyl)imino)pent-2-enide) supported tungsten(V) and tungsten(VI) complexes 16 and 17. All reported complexes have been thoroughly studied by VT-NMR and (heteronuclear) NMR spectroscopy, as well as UV-vis and EPR spectroscopy, IR spectroscopy, and X-ray diffraction analysis.

Exploring the Effect of Pincer Rigidity on Oxidative Addition Reactions with Cobalt(I) Complexes

Cobalt complexes containing the 2,6-diaminopyridine-substituted PNP pincer (iPrPNMeNP = 2,6-(iPr2PNMe)2(C5H3N)) were synthesized. A combination of solid-state structures and investigation of the cobalt(I)/(II) redox potential established a relatively rigid and electron-donating chelating ligand as compared to iPrPNP (iPrPNP = 2,6-(iPr2PCH2)2(C5H3N)). Based on a buried volume analysis, the two pincer ligands are sterically indistinguishable. Nearly planar, diamagnetic, four-coordinate complexes were observed independent of the field strength (chloride, alkyl, aryl) of the fourth ligand completing the coordination sphere of the metal. Computational studies supported a higher barrier for C-H oxidative addition, largely a result of the increased rigidity of the pincer. The increased oxidative addition barrier resulted in stabilization of (iPrPNMeNP)Co(I) complexes, enabling the characterization of the cobalt boryl and the cobalt hydride dimer by X-ray crystallography. Moreover, (iPrPNMeNP)CoMe served as an efficient precatalyst for alkene hydroboration likely because of the reduced propensity to undergo oxidative addition, demonstrating that reactivity and catalytic performance can be tuned by rigidity of pincer ligands.

Development of a General and Selective Nanostructured Cobalt Catalyst for the Hydrogenation of Benzofurans, Indoles and Benzothiophenes

The selective hydrogenation of benzofurans in the presence of a heterogeneous non-noble metal catalyst is reported. The developed optimal catalytic material consists of cobalt-cobalt oxide core-shell nanoparticles supported on silica, which has been prepared by the immobilization and pyrolysis of cobalt-DABCO-citric acid complex on silica under argon at 800 °C. This novel catalyst allows for the selective hydrogenation of simple and functionalized benzofurans to 2,3-dihydrobenzofurans as well as related heterocycles. The versatility of the reported protocol is showcased by the reduction of selected drugs and deuteration of heterocycles. Further, the stability, recycling, and reusability of the Co-nanocatalyst are demonstrated.

Homogeneous Dearomative Hydrogenation with a Co/P4 N2 Catalyst: A Nucleophilic Approach

Arene hydrogenation is the most straightforward method to prepare carbo- and heterocycles. However, the high resonance energy prevents aromatic substrates from hydrogenation. Herein the homogeneous, nucleophilic hydrogenation of less electron-rich arenes and heteroarenes is reported. The Co(P₄ N₂ )H species that has been demonstrated to be a strong hydride donor could deliver a hydride ion to the cyano (hetero)arene substrates. Deuterium labeling experiments supported a Michael-type reaction pathway. Theoretical analyses have been conducted to investigate the hydricity of the catalytically active CoH species and the electrophilicity of the arene substrates. An outlook for the synthesis of more challenging substituted benzenes was proposed based on the in silico modification of the CoH species.

Identification of Cyclohexadienyl Hydrides as Intermediates in Molybdenum-Catalyzed Arene Hydrogenation

Treatment of phosphino(imino)pyridine (PIP) molybdenum cyclooctadiene (COD) complexes [(PIP)Mo(COD)] with dihydrogen in the presence of benzene selectively furnished the molybdenum cyclohexadienyl hydrides [(PIP)MoH(η⁵ -C₆ H₇ )], which are precatalysts for the hydrogenation of benzene to cyclohexane. [(PIP)MoH(η⁵ -C₆ H₇ )] arises from a rarely observed insertion of benzene into a molybdenum-hydride bond, a key step in the molybdenum-catalyzed homogeneous hydrogenation of arenes. The reaction with toluene afforded a single isomer of the corresponding molybdenum cyclohexadienyl hydride while para-xylene predominantly formed the molybdenum η⁶ -arene complex with the insertion product being a minor component. Addition of carbon monoxide to a cyclohexane-d₁₂ solution of [(PIP)MoH(η⁵ -C₆ H₇ )] liberated cyclohexadiene, providing experimental support for a higher kinetic barrier for the subsequent steps en route to cycloalkanes.