General Design Strategy to Precisely Control the Emission of Fluorophores via a Twisted Intramolecular Charge Transfer (TICT) Process

Labeling selectivity of lipid droplets fluorescent probes: Twisted intramolecular charge transfer (TICT) vs intramolecular charge transfer (ICT)

Fluorescence imaging technology is a versatile and essential tool in the field of biomedical research. To obtain excellent imaging results, the precise labeling of fluorescent probes is an important prerequisite. Nevertheless, the labeling selectivity of most fluorescent probes is not satisfactory, new design concepts are desperately needed. In this context, two isomeric lipid droplets (LDs) fluorescent probes Lipi-Cz-1 and Lipi-Cz-2 have been sophisticatedly developed with TICT and ICT-emitting characteristic, respectively. The more environmentally sensitive TICT-emitting Lipi-Cz-1 exhibits a significantly enhanced labeling selectivity in LDs imaging compared to the ICT-emitting Lipi-Cz-2, sufficiently illustrating the effectiveness of TICT-emitting characteristic in improving labeling selectivity. Additionally, Lipi-Cz-1 displays high photostability and biocompatibility. These advantages enable Lipi-Cz-1 to be finely applied in multimode fluorescence imaging, e.g. time-lapse 3D confocal imaging to monitor changes of the number and size of LDs during starvation, two-photon 3D imaging to compare the variations of LDs in various liver tissues, and STED super-resolution imaging to visualize the nanoscale LDs with the resolution of 65 nm. Overall, these imaging findings validate the effectiveness of the new strategy for improving the labeling selectivity.

Xanthene-Based Dyes for Photoacoustic Imaging and their Use as Analyte-Responsive Probes

Developing imaging tools that can report on the presence of disease-relevant analytes in multicellular organisms can provide insight into fundamental disease mechanisms as well as provide diagnostic tools for the clinic. Photoacoustic imaging (PAI) is a light-in, sound-out imaging technique that allows for high resolution, deep-tissue imaging with applications in pre-clinical and point-of-care settings. The continued development of near-infrared (NIR) absorbing small-molecule dyes promises to improve the capabilities of this emerging imaging modality. For example, new dye scaffolds bearing chemoselective functionalities are enabling the detection and quantification of disease-relevant analytes through activity-based sensing (ABS) approaches. Recently described strategies to engineer NIR absorbing xanthenes have enabled development of analyte-responsive PAI probes using this classic dye scaffold. Herein, we present current strategies for red-shifting the spectral properties of xanthenes via bridging heteroatom or auxochrome modifications. Additionally, we explore how these strategies, coupled with chemoselective spiroring-opening approaches, have been employed to create ABS probes for in vivo detection of hypochlorous acid, nitric oxide, copper (II), human NAD(P)H: quinone oxidoreductase isozyme 1, and carbon monoxide. Given the versatility of the xanthene scaffold, we anticipate continued growth and development of analyte-responsive PAI imaging probes based on this dye class.

GENESIS 2.1: High-Performance Molecular Dynamics Software for Enhanced Sampling and Free-Energy Calculations for Atomistic, Coarse-Grained, and Quantum Mechanics/Molecular Mechanics Models

GENeralized-Ensemble SImulation System (GENESIS) is a molecular dynamics (MD) software developed to simulate the conformational dynamics of a single biomolecule, as well as molecular interactions in large biomolecular assemblies and between multiple biomolecules in cellular environments. To achieve the latter purpose, the earlier versions of GENESIS emphasized high performance in atomistic MD simulations on massively parallel supercomputers, with or without graphics processing units (GPUs). Here, we implemented multiscale MD simulations that include atomistic, coarse-grained, and hybrid quantum mechanics/molecular mechanics (QM/MM) calculations. They demonstrate high performance and are integrated with enhanced conformational sampling algorithms and free-energy calculations without using external programs except for the QM programs. In this article, we review new functions, molecular models, and other essential features in GENESIS version 2.1 and discuss ongoing developments for future releases.

Nonpolar selective emission (NPSE) of carbonyl-bridged rhodols

Polarity-responsive luminophores (PRLs), whose emission properties change in response to the polarity of the surrounding environment, are used for the fluorescence sensing of intracellular environments and various chemical compounds. Herein, we propose a concept called nonpolar selective emission (NPSE) for the development of a new PRL family. Unlike the conventional emission of PRLs, the NPSE luminophore can switch to a completely non-emissive state upon a slight increase in solvent polarity. The NPSE concept offers a new means of distinguishing between nonpolar and low-polarity environments. Moreover, the NPSE property is little affected by the viscosity of the surrounding medium. We demonstrate that NPSE dyes can be used as emission sensors for molecular gases. Furthermore, we discovered the potential use of NPSE dyes as a time-dependent security ink triggered by the volatilization of polar molecules.

Developing NIR xanthene-chalcone fluorophores with large Stokes shifts for fluorescence imaging

A series of novel near-infrared (NIR) xanthene-chalcone fluorophores were constructed through a modular synthesis with the electron-donating xanthene moiety and the electron-withdrawing chalcone moiety. These fluorophores are convenient for fluorescence imaging in living cells, benefiting from their NIR emissions (650-710 nm), large Stokes shifts (>100 nm), moderate quantum yields and low cytotoxicity. The substituted hydroxyl group of the xanthene-chalcone fluorophore HCA-E facilitates the development of multifunctional fluorescent probes. As an example, a highly sensitive and selective probe N-HCA-E for glutathione (GSH) detection was developed based on the fluorophore HCA-E. A 4-nitrobenzenesulfonyl (4-Ns) group was introduced to cage the hydroxyl group of HCA-E, which was used as a selective recognition site for the thiol of GSH and an effective fluorescence quencher. Probe N-HCA-E revealed NIR "turn-on" fluorescence (709 nm) for endogenous and exogenous GSH detection in lysosomes with a large Stokes shift (129 nm) and high anti-interference ability.

Dihydroxanthene-based monoamine oxidase A-activated photosensitizers for photodynamic/photothermal therapy of tumors

Small molecule photosensitizers for combined in vivo tailored cancer diagnostics and photodynamic/photothermal therapy are desperately needed. Monoamine oxidase A (MAO-A)-activated therapeutic and diagnostic compounds provide great selectivity because MAO-A can be employed as a biomarker for associated Tumors. In order to screen photosensitizers with photodynamic therapeutic potential, we have created a range of near-infrared fluorescent molecules in this work by combining dihydroxanthene parent with various heterocyclic fluorescent dyes. The NIR fluorescent diagnostic probe, DHMQ, was created by combining the screened fluorescent dye matrices with the propylamino group, which is the recognition moiety of MAO-A, based on the oxidative deamination mechanism of the enzyme. This probe has a low toxicity level and can identify MAO-A precisely. It has the ability to use fluorescence imaging on mice and cells to track MAO-A activity in real-time. It has strong phototoxicity and can produce singlet oxygen when exposed to laser light. The temperature used in photothermal imaging can get up to 50 °C, which can harm tumor cells permanently and have a positive phototherapeutic impact on tumors grown from SH-SY5Y xenograft mice. The concept of using MAO-A effectively in diseases is expanded by the MAO-A-activated diagnostic-integrated photosensitizers, which offer a new platform for in vivo cancer diagnostics and targeted anticancer treatment.

Bioisostere-conjugated fluorescent probes for live-cell protein imaging without non-specific organelle accumulation

Specific labeling of proteins using membrane-permeable fluorescent probes is a powerful technique for bioimaging. Cationic fluorescent dyes with high fluorescence quantum yield, photostability, and water solubility provide highly useful scaffolds for protein-labeling probes. However, cationic probes generally show undesired accumulation in organelles, which causes a false-positive signal in localization analysis. Herein, we report a design strategy for probes that suppress undesired organelle accumulation using a bioisostere for intracellular protein imaging in living cells. Our design allows the protein labeling probes to possess both membrane permeability and suppress non-specific accumulation and has been shown to use several protein labeling systems, such as PYP-tag and Halo tag systems. We further developed a fluorogenic PYP-tag labeling probe for intracellular proteins and used it to visualize multiple localizations of target proteins in the intracellular system. Our strategy offers a versatile design for undesired accumulation-suppressed probes with cationic dye scaffolds and provides a valuable tool for intracellular protein imaging.

Hybrid Small-Molecule/Protein Fluorescent Probes

Hybrid small-molecule/protein fluorescent probes are powerful tools for visualizing protein localization and function in living cells. These hybrid probes are constructed by diverse site-specific chemical protein labeling approaches through chemical reactions to exogenous peptide/small protein tags, enzymatic post-translational modifications, bioorthogonal reactions for genetically incorporated unnatural amino acids, and ligand-directed chemical reactions. The hybrid small-molecule/protein fluorescent probes are employed for imaging protein trafficking, conformational changes, and bioanalytes surrounding proteins. In addition, fluorescent hybrid probes facilitate visualization of protein dynamics at the single-molecule level and the defined structure with super-resolution imaging. In this review, we discuss development and the bioimaging applications of fluorescent probes based on small-molecule/protein hybrids.

Two-Photon Nanoparticle Probe for Formaldehyde Detection via the AILE Luminescence Mechanism

A two-photon nanoparticle probe was designed and developed based on the principle of intermolecular interaction of the aggregation-induced locally excited emission luminescence mechanism. The probe has the advantages of simple synthesis, convenient use, strong atomic economy, good biocompatibility, and photobleaching resistance. It can produce a specific and sensitive response to formaldehyde, help detect FA in normal cells and cancer cells, and is expected to become a specific detection probe for FA in vitro and in vivo.

Two-Photon-Responsive "TICT + AIE" Active Naphthyridine-BF2 Photoremovable Protecting Group: Application for Specific Staining and Killing of Cancer Cells

The combined effects of twisted intramolecular charge transfer (TICT) and aggregation-induced emission (AIE) phenomena have demonstrated a significant influence on excited-state chemistry. These combined TICT and AIE features have been extensively utilized to enhance photodynamic and photothermal therapy. Herein, we demonstrated the synergistic capabilities of TICT and AIE phenomena in the design of the photoremovable protecting group (PRPG), namely, NMe2-Napy-BF2. This innovative PRPG incorporates TICT and AIE characteristics, resulting in four remarkable properties: (i) red-shifted absorption wavelength, (ii) strong near-infrared (NIR) emission, (iii) viscosity-sensitive emission property, and (iv) accelerated photorelease rate. Inspired by these intriguing attributes, we developed a nanodrug delivery system (nano-DDS) using our PRPG for cancer treatment. In vitro studies showed that our nano-DDS manifested effective cellular internalization, specific staining of cancer cells, high-resolution confocal imaging of cancerous cells in the NIR region, and controlled release of the anticancer drug chlorambucil upon exposure to light, leading to cancer cell eradication. Most notably, our nano-DDS exhibited a substantially increased two-photon (TP) absorption cross section (435 GM), exhibiting its potential for in vivo applications. This development holds promise for significant advancements in cancer treatment strategies.

Aggregation-enhanced photothermal therapy of organic dyes

Photothermal therapy (PTT) represents a groundbreaking approach to targeted disease treatment by harnessing the conversion of light into heat. The efficacy of PTT heavily relies on the capabilities of photothermal agents (PTAs). Among PTAs, those based on organic dyes exhibit notable characteristics such as adjustable light absorption wavelengths, high extinction coefficients, and high compatibility in biological systems. However, a challenge associated with organic dye-based PTAs lies in their efficiency in converting light into heat while maintaining stability. Manipulating dye aggregation is a key aspect in modulating non-radiative decay pathways, aiming to augment heat generation. This review delves into various strategies aimed at improving photothermal performance through constructing aggregation. These strategies including protecting dyes from photodegradation, inhibiting non-photothermal pathways, maintaining space within molecular aggregates, and introducing intermolecular photophysical processes. Overall, this review highlights the precision-driven assembly of organic dyes as a promising frontier in enhancing PTT-related applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Design and Screening of Fluorescent Probes Based upon Hemicyanine Dyes for Monitoring Mitochondrial Viscosity in Living Cells

Viscosity, at the subcellular level, plays a crucial role as a physicochemical factor affecting microenvironment homeostasis. Abnormal changes in mitochondrial viscosity often lead to various diseases in the organism. Based on the twisted intramolecular charge transfer mechanism, four hemicyanine dye fluorescent probes (HT-SA, HT-SA-S, HT-Bzh, and HT-NA) were designed and synthesized for viscosity response. The single bond between the nitrogen-containing heterocycle and the carbon-carbon double in the structure of the probe bond served as the viscosity response site. Finally, the probe HT-Bzh was screened as the optimal mitochondrial viscosity probe according to its responsiveness, targeting, and interference resistance. The fluorescence intensity of the probe HT-Bzh increased 22-fold when the viscosity was increased from 13.75 to 811.2 cP. In summary, all four viscosity probes we have developed can be used in different applications depending on the external environment, providing a valuable reference for the design of potential tools to address viscosity monitoring in biological systems.

Recent advances in Si-rhodamine-based fluorescent probes for live-cell imaging

Fluorescence imaging is a powerful technique for visualizing biological events in living samples with high temporal and spatial resolution. Fluorescent probes emitting far-red to near infrared (NIR) fluorescence are particularly advantageous for in vivo imaging due to their high tissue permeability and low autofluorescence, as well as their suitability for multicolor imaging. Among the far-red to NIR fluorophores, Si-rhodamine is one of the most practical fluorophores for the development of tailor-made NIR fluorescent probes because of the relative ease of synthesis of various derivatives, the unique intramolecular spirocyclization behavior, and the relatively high water solubility and high photostability of the probes. This review summarizes these features of Si-rhodamines and presents recent advances in the synthesis and applications of far-red to NIR fluorescent probes based on Si-rhodamines, focusing on live-cell imaging applications such as fluorogenic probes, super-resolution imaging and dye-protein hybrid-based indicators.

Stereochemistry-Dependent Labeling of Organelles with a Near-Infrared-Emissive Phosphorus-Bridged Rhodamine Dye in Live-Cell Imaging

The development of near-infrared (NIR) fluorophores that have both excellent chemical stability and photostability, as well as efficient cell permeability, is highly demanded. In this study, we present phospha-rhodamine (POR) dyes which display significantly improved performance for protein labeling. This is achieved by incorporating a 2-carboxy-3-benzothiophenyl group at the 9-position of the xanthene scaffold. The resulting cis and trans isomers were successfully isolated and structurally characterized using X-ray diffraction. The HaloTag ligand conjugates of the two isomers exhibited different staining abilities in live cells. While the cis isomer showed non-specific accumulation on the organelle membranes, the trans isomer selectively labeled the HaloTag-fused proteins, enabling the long-term imaging of cell division and the 5-color imaging of cell organelles. Molecular dynamics simulations of the HaloTag ligand conjugates within the lipid membrane suggested that the cis isomer is more prone to forming oligomers in the membrane. In contrast, the oligomerization of the trans isomer is effectively suppressed by its interaction with the lipid molecules. By taking advantage of the superior labeling performance of the trans isomer and its NIR-emissive properties, multi-color time-lapse super-resolution 3D imaging, namely super-resolution 5D-imaging, of the interconnected network between the endoplasmic reticulum and microtubules was achieved in living cells.

CinNapht AIE(E)gens for selective imaging of lipid droplets

This article describes the synthesis and photophysical properties of Aggregation-Induced Emission (enhancement) luminogens derivated from CinNaphts dyes. These fluorophores can be obtained in good yields in a single SNAr step of a fluorinated CinNapht derivative by incorporating hindered aromatic amines. They exhibit AIE(E) behavior associated with solid-state fluorescence covering an emission range from 563 to 722 nm. One carbazole derivative demonstrates a remarkable efficiency in imaging lipid droplets in living cells through an original photophysical mechanism.

Boosting Luminescence Efficiency of Near-Infrared-II Aggregation-Induced Emission Luminogens via a Mash-Up Strategy of π-Extension and Deuteration for Dual-Model Image-Guided Surgery

The simultaneous pursuit of accelerative radiative and restricted nonradiative decay is of tremendous significance to construct high-luminescence-efficiency fluorophores in the second near-infrared wavelength window (NIR-II), which is seriously hindered by the energy gap laws. Herein, a mash-up strategy of π-extension and deuteration is proposed to efficaciously ameliorate the knotty problem. By extending the π-conjugation of the aromatic fragment and introducing an isotope effect to the aggregation-induced emission luminogen (AIEgen), an improved oscillator strength (f), coupled with suppressed deformation and high-frequency oscillation in the excited state, are successively implemented. In this case, a faster rate of radiative decay (kr) and restricted nonradiative decay (knr) are simultaneously achieved. Moreover, the preeminent emissive property of AIEgen in the molecular state could be commendably inherited by the aggregates. The corresponding NIR-II emissive AIEgen-based nanoparticles display high brightness, large Stokes shift, and superior photostability simultaneously, which can be applied for image-guided cancer and sentinel lymph node (SLN) surgery. This work thus provides a rational roadmap to improve the luminescence efficiency of NIR-II fluorophores for biomedical applications.

Ultra-photostable small-molecule dyes facilitate near-infrared biophotonics

Long-wavelength, near-infrared small-molecule dyes are attractive in biophotonics. Conventionally, they rely on expanded aromatic structures for redshift, which comes at the cost of application performance such as photostability, cell permeability, and functionality. Here, we report a ground-state antiaromatic strategy and showcase the concise synthesis of 14 cationic aminofluorene dyes with mini structures (molecular weights: 299-504 Da) and distinct spectra covering 700-1600 nm. Aminofluorene dyes are cell-permeable and achieve rapid renal clearance via a simple 44 Da carboxylation. This accelerates optical diagnostics of renal injury by 50 min compared to existing macromolecular approaches. We develop a compact molecular sensing platform for in vivo intracellular sensing, and demonstrate the versatile applications of these dyes in multispectral fluorescence and optoacoustic imaging. We find that aromaticity reversal upon electronic excitation, as indicated by magnetic descriptors, not only reduces the energy bandgap but also induces strong vibronic coupling, resulting in ultrafast excited-state dynamics and unparalleled photostability. These results support the argument for ground-state antiaromaticity as a useful design rule of dye development, enabling performances essential for modern biophotonics.

Ultrabright Acrylic Polymers with Tunable Fluorescence Enabled by Imprisoning Single TICT Probe

Bright and colorful fluorescent polymers are ideal materials for a variety of applications. Although polymers could be made fluorescent by physical doping or chemical binding of fluorescent units, it is a great challenge to get colorful and highly emissive polymers with a single fluorophore. Here the development of a general and facile method to synthesize ultrabright and colorful polymers using a single twisted intramolecular charge transfer (TICT) probe is reported. By incorporating polymerizable, highly fluorescent, and environmental sensitive TICT probe, a series of colorful acrylic polymers (emission from 481 to 543 nm) with almost 100% fluorescence quantum yields are prepared. Like the solvatochromic effect, functional groups within side chains of acrylic polymers (including alkyl chain, tetrahydrofurfuryl group, and hydroxyl group) provide varied environmental polarity for the incorporated fluorophore, resulting in a series of colorful polymeric materials. Benefiting from the excellent photophysical properties, the polymers show great potential in encryption, cultural relics protection, white light-emitting diode bulb making, and fingerprint identification.

A general fluorescence off/on strategy for fluorogenic probes: Steric repulsion-induced twisted intramolecular charge transfer (sr-TICT)

Various control strategies are available for building fluorogenic probes to visualize biological events in terms of a fluorescence change. Here, we performed the time-dependent density functional theory (TD-DFT) computational analysis of the twisted intramolecular charge transfer (TICT) process in rhodamine dyes. On the basis of the results, we designed and synthesized a series of rhodamine dyes and established a fluorescence quenching strategy that we call steric repulsion-induced TICT (sr-TICT), in which the fluorescence quenching process is greatly accelerated by simple intramolecular twisting. As proof of concept of this design strategy, we used it to develop a fluorogenic probe, 2-Me PeER (pentyloxyethylrhodamine), for the N-dealkylation activity of CYP3A4. We applied 2-Me PeER for CYP3A4 activity-based fluorescence-activated cell sorting (FACS), providing access to homogeneous, highly functional human-induced pluripotent stem cell (hiPSC)-derived hepatocytes and intestinal epithelial cells. Our results suggest that sr-TICT represents a general fluorescence control method for fluorogenic probes.

Aryl-Modified Pentamethyl Cyanine Dyes at the C2' Position: A Tunable Platform for Activatable Photosensitizers

Pentamethyl cyanine dyes are promising fluorophores for fluorescence sensing and imaging. However, advanced biomedical applications require enhanced control of their excited-state properties. Herein, a synthetic approach for attaching aryl substituents at the C2' position of the thio-pentamethine cyanine (TCy5) dye structure is reported for the first time. C2'-aryl substitution enables the regulation of both the twisted intramolecular charge transfer (TICT) and photoinduced electron transfer (PET) mechanisms to be regulated in the excited state. Modulation of these mechanisms allows the design of a nitroreductase-activatable TCy5 fluorophore for hypoxic tumor photodynamic therapy and fluorescence imaging. These C2'-aryl TCy5 dyes provide a tunable platform for engineering cyanine dyes tailored to sophisticated biological applications, such as photodynamic therapy.

Deciphering the photophysical properties of naphthalimide derivatives using ultrafast spectroscopy

Naphthalimide derivatives composed of donor-acceptor type structures hold significant promise across a wide range of applications. Here, the solvent polarity and viscosity controlled excited-state dynamics of a naphthalimide derivative with a donor-acceptor structure were studied using multiple spectroscopic techniques. From the stationary spectroscopic investigations, large Stokes shift and low fluorescence quantum yield were observed with increasing the solvent polarity, suggesting a more polar excited state relative to the ground state, which is evidenced by the Lippert-Mataga relationship. We also observe an enhanced fluorescence with a prolonged lifetime in a more viscous solution due to the restriction of excited-state molecular rearrangement. These observations result from the emerged twisted intramolecular charge transfer (TICT) state. The ultrafast spectroscopy studies further unravel a solvent polarity dependent excited state evolution from the intramolecular charge transfer state to the TICT state, revealing that the TICT state can be populated only in strong polar solvents. Control experiments by tuning the solvent viscosity in ultrafast experiments were employed to verify the excited state molecular rearrangement subsequently. These observations collectively emphasize how fine-tuning the photophysical properties of naphthalimide derivatives can be achieved through strategic manipulation of solvent polarity and viscosity.

TDDFT study on a fluorescent probe for distinguishing analogous thiols based on smiles rearrangement

The complete excited-state sensing mechanism of a fluorescent probe capable of distinguishing cysteine/homocysteine and glutathione from analogous biological thiols has been investigated. Using a TDDFT method, the nature of the fluorescence differences in the detection of thiols by the probe has been explained at the molecular level. Calculation results imply that the probe undergoes photoinduced electron transfer (PET) from the fluorophore to the nitrobenzooxadiazole (NBD)-based acceptor in the excited state. In the presence of a thiol, the NBD moiety is cleaved and the red fluorescence emission of the fluorophore is enhanced through inhibition of the PET process. The sulfur-substituted NBD-thiol product is predisposed to undergo excited-state torsion, leading to fluorescence quenching. However, for cysteine and homocysteine, their appropriate distances lead to Smiles rearrangements with relatively low activation energies (26.60 kJ/mol and 42.94 kJ/mol, respectively) and the emission of a distinct green fluorescence at ambient temperature. It has been theoretically confirmed that the distance between two reactive sites, such as sulfhydryl and amino moieties, can be used to distinguish different thiols, thus providing rational support for the control of fluorescence activity and the design of probe molecules.

Spectroscopic and optical properties of 1,2,4-triazolo[4,3-a]pyridin-3(2H)-one as a component of herbicides

The herbicides azafenidin [(2-(2,4-dichloro-5-prop-2-ynoxyphenyl)-5,6,7,8-tetrahydro-[1,2,4]triazolo[4,3-a]pyridin-3-one)] and flumetsulam [(N-(2,6-difluorophenyl)-5-methyl-[1,2,4]triazolo[1,5-a]pyrimidine-2-sulfonamide)] were subjected to IR, Raman, UV-Vis and emission studies. As triazolopyridine is the most prominent and active component of these herbicides, this molecule was characterised by XRD studies, FTIR, Raman, UV-Vis and emission spectra. The experimental data were compared to the results of the DFT quantum chemical calculations carried out for its optimised structure, IR intensities and Raman activities, HOMO-LUMO transitions, and energies of the singlet and triplet states. The characteristics for triazolopyridine quantities were used in the analysis of the studied herbicides.

Dynamically stable co-assembled supramolecular BOPPY systems with chiral amplification

New and dynamical chiral co-assembled systems bearing BOPPY were successfully developed with amplified CPL signals. Remarkably, these stable chiral co-assemblies prepared at high concentrations retain uniform microrods and exceptional chiroptical performance (glum = 0.028, ΦF = 14%) after 48 h.

Optimized Red-Absorbing Dyes for Imaging and Sensing

Rhodamine dyes are excellent scaffolds for developing a broad range of fluorescent probes. A key property of rhodamines is their equilibrium between a colorless lactone and fluorescent zwitterion. Tuning the lactone-zwitterion equilibrium constant (KL-Z) can optimize dye properties for specific biological applications. Here, we use known and novel organic chemistry to prepare a comprehensive collection of rhodamine dyes to elucidate the structure-activity relationships that govern KL-Z. We discovered that the auxochrome substituent strongly affects the lactone-zwitterion equilibrium, providing a roadmap for the rational design of improved rhodamine dyes. Electron-donating auxochromes, such as julolidine, work in tandem with fluorinated pendant phenyl rings to yield bright, red-shifted fluorophores for live-cell single-particle tracking (SPT) and multicolor imaging. The N-aryl auxochrome combined with fluorination yields red-shifted Förster resonance energy transfer (FRET) quencher dyes useful for creating a new semisynthetic indicator to sense cAMP using fluorescence lifetime imaging microscopy (FLIM). Together, this work expands the synthetic methods available for rhodamine synthesis, generates new reagents for advanced fluorescence imaging experiments, and describes structure-activity relationships that will guide the design of future probes.

A fluorescent probe for imaging nitroreductase with signal amplification in high-viscosity environments

Herein, we developed a fluorescent probe ENBT for in vitro detection of nitroreductase (NTR) as well as imaging intracellular NTR. ENBT itself is non-fluorescent and it could be catalyzed by NTR to generate a viscosity-sensitive fluorophore EBT. The fluorescence intensity of EBT could be further enhanced in cancer cells with relatively high viscosity due to the inhibition of the twisted intramolecular charge transfer effect. The probe ENBT has a good response to NTR with a detection limit of 36.8 ng mL-1, and EBT has a good response to viscosity. Furthermore, different concentrations of NTR (0-1.4 μg mL-1) were used to react with the probe and the reaction systems were subjected to different viscosity solutions, and the fluorescence signals of the products in the viscosity range of 45.86-163.60 cP were increased up to 1.69-fold. ENBT was successfully used to image NTR in cells under different hypoxic conditions as well as in Staphylococcus aureus. Finally, lipopolysaccharide was added to stimulate an increase in cellular viscosity after ENBT was catalyzed by intracellular NTR into EBT, and the fluorescence signals were observed to increase by 1.72-fold. The signal amplification capability gives ENBT higher sensitivity and immunity to interference. Moreover, it has the advantages of mitochondrial targeting, large Stokes shift (190 nm), high selectivity, and can be easily synthesized.

Molecular Design Strategy of Protein Isoform-Specific Fluorescent Probes by Considering Molecule in Its Entirety

Generally, different isoforms of proteins exert separate biological functions. However, due to similar structures and identical catalysis functions, distinguishing isoforms is challenging. Summarizing a molecular design strategy has great significance in developing a protein-specific fluorescent probe. Usually, recognition of a group was deemed to be the key to a protein isoform-specific response. However, some novel literature reported that fluorophore could play a vital role in the protein isoform-specific response. It means that any part of the fluorescent probe could affect the detected properties. In this work, we report the generation of the first probe to specifically recognize HexA(β-N-acetylhexosaminidase A), Hex-C4, by adjusting the length of the linker. Hex-C4 exhibits specific recognition of HexA both in vitro and in living cells. The integration of the fluorescent spectrum and the MD (molecular dynamics) results provide two factors for the molecular design of isoform-specific fluorescent probes. One is the interaction between tetraphenyl ethylene (AIE fluorogen) and amino acid residues, and the other is the interaction between amino acid residues and the binding group. In this work, a powerful tool to detect HexA in living cells is reported for the first time. Further, a workable molecular design strategy for protein isoform-specific fluorescent probes is summarized.

Synthesis and Application of Two-Photon Active Fluorescent Rhodol Dyes for Antibody Conjugation and In Vitro Cell Imaging

A novel family of julolidine-containing fluorescent rhodols equipped with a wide variety of substituents was synthesized in a versatile two-step process. The prepared compounds were fully characterized and exhibited excellent fluorescence properties for microscopy imaging. The best candidate was conjugated to the therapeutic antibody trastuzumab through a copper-free strain-promoted azide-alkyne click reaction. The rhodol-labeled antibody was successfully applied for in vitro confocal and two-photon microscopy imaging of Her2+ cells.

A fluorescent probe for detecting mitochondrial viscosity and its application in distinguishing human breast cancer cells from normal ones

Mitochondrial viscosity is closely associated with intracellular physiological activities yet their abnormality will result in various diseases. In particular, viscosity in cancer cells is different from that in normal cells, which is thought to be an indicator for cancer diagnosis. However, there were few fluorescent probes able to distinguish homologous cancer and normal cells by detecting mitochondrial viscosity. Herein, we designed a viscosity-sensitive fluorescent probe (named NP) based on the twisting intramolecular charge transfer (TICT) mechanism. NP exhibited exquisite sensitivity to viscosity and selectivity to mitochondria and excellent photophysical properties, such as large Stokes shift and high molar extinction coefficient, which enables wash-free, high-fidelity and fast imaging mitochondria. Moreover, it was capable of detecting mitochondrial viscosity in living cells and tissue, as well as monitoring apoptosis process. Significantly, considering numerous breast cancer cases in every country of the world, NP was successfully applied to distinguish human breast cancer cells (MCF-7) from normal cells (MCF-10A) by difference in fluorescence intensity originated from abnormality in mitochondrial viscosity. All the results indicated that NP could serve as a robust tool for effectively detecting mitochondrial viscosity changes in-situ.

Development and Characterization of a Highly Selective Turn-On Fluorescent Ligand for β3-Adrenergic Receptor

For the precise visualization of GPCR, subtype selectivity of turn-on fluorescent ligands is of major relevance. Although there are many thriving β-adrenergic receptors (β-ARs) probes, none of them are selective to the β₃-subtype, which severely limits the development of β₃-AR investigations. Using a polyethylene glycol (PEG) chain to conjugate the Py-5 fluorophore with mirabegron, we present here a highly selective fluorescent ligand, H2, for β₃-AR. It was established by the radioligand and NanoLuc-based bioluminescence resonance energy transfer (NanoBRET) binding experiments that molecule H2 has a substantially higher affinity for β₃-AR than the other two subtypes (1/3, 45-fold; 2/3, 16-fold). More crucially, when molecule H2 was incubated with β₃-AR, the turn-on fluorescent signals could be quickly released. The subsequent investigations, which included cell imaging, tissue imaging, and flow-cytometry analysis, proved that molecule H2 may make it possible to quickly and accurately fluorescently identify β₃-AR at different levels. We offer a prospective fluorescent turn-on ligand with exceptional selectivity for β₃-AR as a result of our combined efforts.

H2S-based fluorescent imaging for pathophysiological processes

Hydrogen sulfide (H₂S), as an important endogenous signaling molecule, plays a vital role in many physiological processes. The abnormal behaviors of hydrogen sulfide in organisms may lead to various pathophysiological processes. Monitoring the changes in hydrogen sulfide is helpful for pre-warning and treating these pathophysiological processes. Fluorescence imaging techniques can be used to observe changes in the concentration of analytes in organisms in real-time. Therefore, employing fluorescent probes imaging to investigate the behaviors of hydrogen sulfide in pathophysiological processes is vital. This paper reviews the design strategy and sensing mechanisms of hydrogen sulfide-based fluorescent probes, focusing on imaging applications in various pathophysiological processes, including neurodegenerative diseases, inflammation, apoptosis, oxidative stress, organ injury, and diabetes. This review not only demonstrates the specific value of hydrogen sulfide fluorescent probes in preclinical studies but also illuminates the potential application in clinical diagnostics.