Single-Site Heterogeneous Catalysts for Olefin Polymerization Enabled by Cation Exchange in a Metal-Organic Framework

Ethylene Polymerization over Metal-Organic Framework-Supported Zirconocene Complexes

Metallocene immobilization onto a solid support helps to overcome the drawbacks of homogeneous metallocene complexes in the catalytic olefin polymerization. In this study, valuable insights have been obtained into the effects of pore size, linker composition, and surface groups of metal-organic frameworks (MOFs) on their role as support materials for metallocene-based ethylene polymerization catalysis. Three distinct Zn-based metal-organic frameworks (MOFs), namely, MOF-5, IRMOF-3, and ZIF-8, with different linkers have been activated with methylaluminoxane (MAO) and zirconocene complexes, followed by materials characterization and testing for ethylene polymerization. Characterization has been performed by multiple analytical tools, including X-ray diffraction (XRD), scanning electron microscopy (SEM), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and CO Fourier transform infrared (FT-IR) spectroscopy. It was found that the interactions between MOFs, MAO, and the zirconocene complex not only lead to both catalyst activation and deactivation but also result in the creation of multiple active sites. By alteration of the MOF support, it is possible to obtain polyethylene with different properties. Notably, ultrahigh molecular weight polyethylene (UHMWPE, M W = 5.34 × 106) was obtained using IRMOF-3 as support. This study reveals the potential of MOF materials as tunable porous supports for metallocene catalysts active in ethylene polymerization.

Engineering Single-Atom Sites with the Irving-Williams Series for the Simultaneous Co-photocatalytic CO2 Reduction and CH3CHO Oxidation

The bonding effects between 3d transition-metal single sites and supports originate from crystal field stabilization energy (CFSE). The 3d transition-metal atoms of the spontaneous geometrical distortions, that is the Jahn-Teller effect, can alter CFSE, thereby leading to the Irving-Williams series. However, engineering single-atom sites (SASs) using the Irving-Williams series as an ideal guideline has not been reported to date. Herein, alkynyl-linked covalent phenanthroline frameworks (CPFs) with phenanthroline units are developed to anchor the desired 3d single metal ions from d5 to d10 (Mn2+, Fe3+, Co2+, Ni2+, Cu2+, and Zn2+). The Irving-Williams series was employed to accurately predict the bonding effects between 3d transition-metal atoms and phenanthroline units. To verify this, theoretical calculations and experimental results reveal that Cu-SASs/CPFs exhibits higher stability and faster charge-transfer efficiency, far surpassing other metal-SASs/CPFs. As expected, Cu-SASs/CPFs demonstrates a high photoreduction of CO2-to-CO activity (~30.3 μmol ⋅ g-1 ⋅ h-1) and an exceptional photooxidation of CH3CHO-to-CH3COOH activity (~24.7 μmol ⋅ g-1 ⋅ h-1). Interestingly, the generated *O2 - is derived from the process of CO2 reduction, thereby triggering a CH3CHO oxidation reaction. This work provides a novel design concept for designing SASs by the Irving-Williams to regulate the catalytic performances.

Tailoring Type III Porous Ionic Liquids for Enhanced Liquid-Liquid Two-Phase Catalysis

Porous Ionic Liquids (PILs) have gained attention but facing challenges in catalysis, especially in liquid-liquid two-phase reactions due to limited catalytic sites and hydrophilicity control. This work engineered a Type III PILs (PILS-M) using zeolitic imidazolate framework-8 (ZIF-8) confined phosphomolybdic acid (HPMo) as the microporous framework and N-butyl pyridine bis(trifluoromethane sulfonyl) imide ionic liquid ([Bpy][NTf2]) as the solvent. The PILS-M not only combines the advantages of traditional ionic liquids and microporous frameworks, including excellent extraction, high dispersion of catalytically active species, remarkable stability, etc., but also can make the inner surface of ZIF-8 turned to be hydrophilic that favors the contact between aqueous hydrogen peroxide oxidant and catalytically active sites for the promotion of catalytic performance in reactive extractive desulfurization (REDS) processes of fuel oils. This study demonstrates Type III PILs' potential as catalysts for sustainable chemical processes, offering insights into versatile PILs applications in diverse fields.

Quantum chemical modeling of hydrogen binding in metal-organic frameworks: validation, insight, predictions and challenges

A detailed chemical understanding of H2 interactions with binding sites in the nanoporous crystalline structure of metal-organic frameworks (MOFs) can lay a sound basis for the design of new sorbent materials. Computational quantum chemical calculations can aid in this quest. To set the stage, we review general thermodynamic considerations that control the usable storage capacity of a sorbent. We then discuss cluster modeling of H2 ligation at MOF binding sites using state-of-the-art density functional theory (DFT) calculations, and how the binding can be understood using energy decomposition analysis (EDA). Employing these tools, we illustrate the connections between the character of the MOF binding site and the associated adsorption thermodynamics using four experimentally characterized MOFs, highlighting the role of open metal sites (OMSs) in accessing binding strengths relevant to room temperature storage. The sorbents are MOF-5, with no open metal sites, Ni2(m-dobdc), containing Lewis acidic Ni(II) sites, Cu(I)-MFU-4l, containing π basic Cu(I) sites and V2Cl2.8(btdd), also containing π-basic V(II) sites. We next explore the potential for binding multiple H2 molecules at a single metal site, with thermodynamics useful for storage at ambient temperature; a materials design goal which has not yet been experimentally demonstrated. Computations on Ca2+ or Mg2+ bound to catecholate or Ca2+ bound to porphyrin show the potential for binding up to 4 H2; there is precedent for the inclusion of both catecholate and porphyrin motifs in MOFs. Turning to transition metals, we discuss the prediction that two H2 molecules can bind at V(II)-MFU-4l, a material that has been synthesized with solvent coordinated to the V(II) site. Additional calculations demonstrate binding three equivalents of hydrogen per OMS in Sc(I) or Ti(I)-exchanged MFU-4l. Overall, the results suggest promising prospects for experimentally realizing higher capacity hydrogen storage MOFs, if nontrivial synthetic and desolvation challenges can be overcome. Coupled with the unbounded chemical diversity of MOFs, there is ample scope for additional exploration and discovery.

Asymmetric membranes for gas separation: interfacial insights and manufacturing

State-of-the-art gas separation membrane technologies combine the properties of polymers and other materials, such as metal-organic frameworks to yield mixed matrix membranes (MMM). Although, these membranes display an enhanced gas separation performance, when compared to pure polymer membranes; major challenges remain in their structure including, surface defects, uneven filler dispersion and incompatibility of constituting materials. Therefore, to avoid these structural issues posed by today's membrane manufacturing methodologies, we employed electrohydrodynamic emission and solution casting as a hybrid membrane manufacturing method, to produce ZIF-67/cellulose acetate asymmetric membranes with improved gas permeability and selectivity for CO2/N2, CO2/CH4, and O2/N2. Rigorous molecular simulations were used to reveal the key ZIF-67/cellulose acetate interfacial phenomena (e.g., higher density, chain rigidity, etc.) that must be considered when engineering optimum composite membranes. In particular, we demonstrated that the asymmetric configuration effectively leverages these interfacial features to generate membranes superior to MMM. These insights coupled with the proposed manufacturing technique can accelerate the deployment of membranes in sustainable processes such as carbon capture, hydrogen production, and natural gas upgrading.

Microenvironment Modulation of Metal-Organic Frameworks (MOFs) for Coordination Olefin Oligomerization and (co)Polymerization

The majority of commercial polyolefins are produced by coordination polymerization using early or late transition metal catalysts. Molecular catalysts containing these transition metals (Ti, Zr, Cr, Ni, and Fe, etc.) are loaded on supports for controlled polymerization behavior and polymer morphology in slurry or gas phase processes. Within the last few years, metal-organic frameworks (MOFs), a class of unique porous crystalline materials constructed from metal ions/clusters and organic ligands, have been designed and utilized as excellent supports for heterogeneous polymerization catalysis whose high density and uniform distribution of active sites would benefit the modulations of molecular weight distributions of high-performance olefin oligomers and (co)polymers. Impressive efforts have been made to modulate the microenvironment surrounding the active centers at the atomic level for improved activities of MOFs-based catalysts and controlled selectivity of olefin insertion. This review aims to draw a comprehensive picture of MOFs for coordination olefin oligomerization and (co)polymerization in the past decades with respect to different transition metal active centers, various incorporation sites, and finally microenvironment modulation. In consideration of more efforts are needed to overcome challenges for further industrial and commercial application, a brief outlook is provided.

Ionic metal-organic frameworks (iMOFs): progress and prospects as ionic functional materials

Metal-organic frameworks (MOFs) have been a research hotspot for the last two decades, witnessing an extraordinary upsurge across various domains in materials chemistry. Ionic MOFs (both anionic and cationic MOFs) have emerged as next-generation ionic functional materials and are an important subclass of MOFs owing to their ability to generate strong electrostatic interactions between their charged framework and guest molecules. Furthermore, the presence of extra-framework counter-ions in their confined nanospaces can serve as additional functionality in these materials, which endows them a significant advantage in specific host-guest interactions and ion-exchange-based applications. In the present review, we summarize the progress and future prospects of iMOFs both in terms of fundamental developments and potential applications. Furthermore, the design principles of ionic MOFs and their state-of-the-art ion exchange performances are discussed in detail and the future perspectives of these promising ionic materials are proposed.

Switchable Metal Sites in Metal-Organic Framework MFM-300(Sc): Lewis Acid Catalysis Driven by Metal-Hemilabile Linker Bond Dynamics

Uncommon reversible guest-induced metal-hemilabile linker bond dynamics in MOF MFM-300(Sc) was unraveled to switch on/switch off catalytic open metal sites. The catalytic activity of this MOF with non-permanent open metal sites was demonstrated using a model Strecker hydrocyanation reaction as a proof-of-concept. Conclusively, the catalytic activity was evidenced to be fully reversible, preserving the conversion performance and structure integrity of MFM-300(Sc) over multiple cycles. These experimental findings were corroborated by quantum-calculations that revealed a reaction mechanism driven by the Sc-open metal sites. This discovery paves the way towards the design of new effective and easily regenerable heterogeneous MOF catalysts integrating switchable metal sites.

Inhibition, Binding of Organometallics, and Thermally Induced CO Release in an MFU-4-Type Metal-Organic Framework Scaffold with Open Bidentate Bibenzimidazole Coordination Sites

Triazolate-based MFU-4-type metal-organic frameworks are promising candidates for various applications, of which heterogeneous catalysis has emerged as a hot topic owing to the facile post-synthetic metal and ligand exchange in Kuratowski secondary building units (SBUs). Herein, we present the largest non-interpenetrated isoreticular MFU-4-type framework CFA-19 ([Co₅^IICl₄(H₂-bibt)₃]; H₄-bibt = 1,1',5,5'-tetrahydro-6,6'-biimidazo[4,5-f]benzotriazole; CFA-19 = Coordination Framework Augsburg University-19) and the CFA-19-Tp derivative featuring trispyrazolylborate inhibited SBUs as a scaffold with open bibenzimidazole coordination sites at the backbone of the H₄-bibt linker. The proof-of-principle incorporation of accessible M^IBr(CO)₃ (M = Re, Mn) sites in CFA-19-Tp was revealed by single-crystal X-ray diffraction, and a thermally induced CO release was observed for MnBr(CO)₃. Deprotonation of bibenzimidazole was also achieved by the reaction with ZnEt₂.

Selective Photocatalytic Dehydrogenation of Formic Acid by an In Situ-Restructured Copper-Postmetalated Metal-Organic Framework under Visible Light

Formic acid is considered as one of the most promising liquid organic hydrogen carriers. Its catalytic dehydrogenation process generally suffers from low activity, low reaction selectivity, low stability of the catalysts, and/or the use of noble-metal-based catalysts. Herein we report a highly selective, efficient, and noble-metal-free photocatalyst for the dehydrogenation of formic acid. This catalyst, UiO-66(COOH)₂-Cu, is built by postmetalation of a carboxylic-functionalized Zr-MOF with copper. The visible-light-driven photocatalytic dehydrogenation process through the release of hydrogen and carbon dioxide has been monitored in real-time viaoperando Fourier transform infrared spectroscopy, which revealed almost 100% selectivity with high stability (over 3 days) and a conversion yield exceeding 60% (around 5 mmol·g_cat^–1·h^–1) under ambient conditions. These performance indicators make UiO-66(COOH)₂-Cu among the top photocatalysts for formic acid dehydrogenation. Interestingly, the as-prepared UiO-66(COOH)₂-Cu hetero-nanostructure was found to be moderately active under solar irradiation during an induction phase, whereupon it undergoes an in-situ restructuring process through intraframework cross-linking with the formation of the anhydride analogue structure UiO-66(COO)₂-Cu and nanoclustering of highly active and stable copper sites, as evidenced by the operando studies coupled with steady-state isotopic transient kinetic experiments, transmission electron microscopy and X-ray photoelectron spectroscopy analyses, and Density Functional Theory calculations. Beyond revealing outstanding catalytic performance for UiO-66(COO)₂-Cu, this work delivers an in-depth understanding of the photocatalytic reaction mechanism, which involves evolutive behavior of the postmetalated copper as well as the MOF framework over the reaction. These key findings pave the way toward the engineering of new and efficient catalysts for photocatalytic dehydrogenation of formic acid.

Strategies for the application of metal-organic frameworks in catalytic reactions

Efficient catalysts play crucial roles in various organic reactions and polymerization. Metal–organic frameworks (MOFs) have the merits of ultrahigh porosity, large surface area, dispersed polymetallic sites and modifiable linkers, which make them promising candidates for catalyzation. This review primarily summarizes the recent research progress on diverse strategies for tailoring MOFs that are endowed with excellent catalytic behavior. These strategies include utilizing MOFs as nanosized reaction channels, metal nodes decorated as catalytic active sites and the modification of ligands or linkers. All these make them highly attractive to various applications, especially in catalyzing organic reactions or polymerizations and they have proven to be effective catalysts for a wide variety of reactions. MOFs are still an evolving field with tremendous prospects; therefore, through the research and development of more modification and regulation strategies, MOFs will realize their wider practical application in the future.

Metal–organic frameworks (MOFs) are promising candidates for catalyzation. This review primarily summarized the recent research progress in diverse strategies for tailoring MOFs which are endowed with more excellent catalytic behavior.

Exchange of coordinated carboxylates with azolates as a route to obtain a microporous zinc-azolate framework

Metal-organic frameworks (MOFs) containing open metal sites are advantageous for wide applications. Here, carboxylate linkers are replaced with triazolate coordination in pre-formed Zn-MOF-74 via solvent-assisted linker exchange (SALE) to prepare the novel NU-250, within the known hexagonal channel-based MAF-X25 series that has not previously been synthesized de novo.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Construction of Stable Metal-Organic Framework Platforms Embedding N-Heterocyclic Carbene Metal Complexes for Selective Catalysis

We report a bottom-up approach to immobilize catalysts into MOFs, including copper halides and gold chloride in a predictable manner. Interestingly, the structures of MOFs bearing NHC metal complexes maintained a similar 4-fold interpenetrated cube. They exhibited exceptionally high porosity despite the interpenetrated structure and showed good stability in various solvents. Moreover, these MOFs possess high size activity depending on the size of the substrates in various reactions, compared to homogeneous catalysis. Also, the high catalytic activity of MOFs can be preserved 4 times without significant loss of crystallinity. Incorporation of the various metal complexes into MOFs allows for the preparation of functional MOFs for practical applications.

Kinetically Controlled Linker Binding in Rare Earth-2,5-Dihydroxyterepthalic Acid Metal-Organic Frameworks and Its Predicted Effects on Acid Gas Adsorption

In the pursuit of highly stable and selective metal-organic frameworks (MOFs) for the adsorption of caustic acid gas species, an entire series of rare earth MOFs have been explored. Each of the MOFs in this series (RE-DOBDC; RE = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu; DOBDC = 2,5-dihydroxyterepthalic acid) was synthesized in the tetragonal space group I4/m. Crystallized MOF samples, specifically Eu-DOBDC, were seen to have a combination of monodentate and bidentate binding when synthesized under typical reaction conditions, resulting in a contortion of the structure. However, extended crystallization times determined that this binding is kinetically controlled and that the monodentate binding option was crystallographically eliminated by extended reaction times at higher temperatures. Furthermore, this series allows for the direct study of the effect of the metal center on the structure of the of the MOF; herein, the lanthanide metal ionic radii contraction across the periodic table results in a reduction of the MOF pore size and lattice parameters. Scanning electron microscopy-energy-dispersive spectroscopy was used to investigate the stages of crystal growth for these RE-DOBDC MOFs. All MOFs, except Er-DOBDC had a minimum of two stages of growth. These analogues were demonstrated by analysis of neutron diffraction (PND) to exhibit a cooperative rotational distortion of the secondary building unit, resulting in two crystallographically distinct linker sublattices. Computational modeling efforts were used to show distinct differences on acid gas (NO₂ and SO₂) binding energies for RE-DOBDC MOFs when comparing the monodentate/bidentate combined linker with the bidentate-only linker crystal structures.

Elemental Depth Profiling of Intact Metal-Organic Framework Single Crystals by Scanning Nuclear Microprobe

The growing field of MOF–catalyst composites often relies on postsynthetic modifications for the installation of active sites. In the resulting MOFs, the spatial distribution of the inserted catalysts has far-reaching ramifications for the performance of the system and thus needs to be precisely determined. Herein, we report the application of a scanning nuclear microprobe for accurate and nondestructive depth profiling of individual UiO-66 and UiO-67 (UiO = Universitetet i Oslo) single crystals. Initial optimization work using native UiO-66 crystals yielded a microbeam method which avoided beam damage, while subsequent analysis of Zr/Hf mixed-metal UiO-66 crystals demonstrated the potential of the method to obtain high-resolution depth profiles. The microbeam method was further used to analyze the depth distribution of postsynthetically introduced organic moieties, revealing either core–shell or uniform incorporation can be obtained depending on the size of the introduced molecule, as well as the number of carboxylate binding groups. Finally, the spatial distribution of platinum centers that were postsynthetically installed in the bpy binding pockets of UiO-67-bpy (bpy = 5,5′-dicarboxyy-2,2′-bipyridine) was analyzed by microbeam and contextualized. We expect that the method presented herein will be applicable for characterizing a wide variety of MOFs subjected to postsynthetic modifications and provide information crucial for their optimization as functional materials.

Using Postsynthetic X-Type Ligand Exchange to Enhance CO2 Adsorption in Metal-Organic Frameworks with Kuratowski-Type Building Units

Postsynthetic modification methods have emerged as indispensable tools for tuning the properties and reactivity of metal-organic frameworks (MOFs). In particular, postsynthetic X-type ligand exchange (PXLE) at metal building units has gained increasing attention as a means of immobilizing guest species, modulating the reactivity of framework metal ions, and introducing new functional groups. The reaction of a Zn-OH functionalized analogue of CFA-1 (1-OH, Zn(ZnOH)₄(bibta)₃, where bibta^2- = 5,5'-bibenzotriazolate) with organic substrates containing mildly acidic E-H groups (E = C, O, N) results in the formation of Zn-E species and water as a byproduct. This Brønsted acid-base PXLE reaction is compatible with substrates with pK_a(DMSO) values as high as 30 and offers a rapid and convenient means of introducing new functional groups at Kuratwoski-type metal nodes. Gas adsorption and diffuse reflectance infrared Fourier transform spectroscopy experiments reveal that the anilide-exchanged MOFs 1-NHPh_0.9 and 1-NHPh_2.5 exhibit enhanced low-pressure CO₂ adsorption compared to 1-OH as a result of a Zn-NHPh + CO₂ ⇌ Zn-O₂CNHPh chemisorption mechanism. The MFU-4l analogue 2-NHPh ([Zn₅(OH)_2.1(NHPh)_1.9(btdd)₃], where btdd^2- = bis(1,2,3-triazolo)dibenzodioxin), shows a similar improvement in CO₂ adsorption in comparison to the parent MOF containing only Zn-OH groups.

Selective cyclohexene oxidation to allylic compounds over a Cu-triazole framework via homolytic activation of hydrogen peroxide

Utilization of metal-organic frameworks as heterogeneous catalysts is crucial owing to their abundant catalytic sites and well-defined porous structures. Highly robust [Cu3(trz)3(μ3-OH)(OH)2(H2O)4]·2H2O (trz = 1,2,4-triazole) was employed as a catalyst for liquid-phase cyclohexene oxidation with hydrogen peroxide (H2O2). Possessing the porous structure together with Lewis acid attributes from the triangular [Cu3(trz)3(μ3-OH)] center, selective oxidation of cyclohexene to allylic products gives a molar yield of 31% with 87% selectivity. According to the highly selective allylic production, the reaction over the present Cu-MOF plausibly occurs via homolytic activation of H2O2. This finding elucidates the unique features of the MOF for efficient catalysis of cyclohexene oxidation.

Theoretical Insight into the Effect of Fluorine-Functionalized Metal-Organic Framework Supported Palladium Single-Site Catalyst in the Ethylene Dimerization Reaction

Ethylene dimerization reaction is one of the most common mechanisms for the production of 1-butene. Recently, metal-organic frameworks (MOFs) have received extensive attention in this area since they combine all the advantages of homogeneous and heterogeneous catalysts in a single compound. Here a computational mechanistic study of MOF-supported palladium single-site catalyst for ethylene dimerization reaction is reported. Catalytic systems with both biphenyl-type backbone as organic ligand and its fluorine-functionalization have been investigated to reveal the origin of ligand effects on the catalytic activity and selectivity. The calculations revealed that the nonfluorinated palladium MOF catalyst undergoes dimerization over isomerization reaction. Then the influence of the fluorine-functionalized organic ligand was compared in the dimerization catalytic cycle, which was strongly favored in terms of activity and selectivity. Catalyst-substrate interactions were analyzed by energy decomposition analysis revealing the critical role of ligand backbone functionalization on the activity. This theoretical analysis identified three chemically meaningful dominant effects on these catalysts; steric, electrostatic and charge transfer effects. The steric effects promote nonfluorinated MOF catalyst, whereas the electrostatic effects are the dominant factor that promotes its fluorinated counterpart. This theoretical study provides feedback with future experimental studies about the role of fluorine ligand functionalization in palladium MOF catalysts for ethylene dimerization reaction.

What Lies beneath a Metal-Organic Framework Crystal Structure? New Design Principles from Unexpected Behaviors

The rational design principles established for metal-organic frameworks (MOFs) allow clear structure-property relationships, fueling expansive growth for energy storage and conversion, catalysis, and beyond. However, these design principles are based on the assumption of compositional and structural rigidity, as measured crystallographically. Such idealization of MOF structures overlooks subtle chemical aspects that can lead to departures from structure-based chemical intuition. In this Perspective, we identify unexpected behavior of MOFs through literature examples. Based on this analysis, we conclude that departures from ideality are not uncommon. Whereas linker topology and metal coordination geometry are useful starting points for understanding MOF properties, we anticipate that deviations from the idealized crystal representation will be necessary to explain important and unexpected behaviors. Although this realization reinforces the notion that MOFs are highly complex materials, it should also stimulate a broader reexamination of the literature to identify corollaries to existing design rules and reveal new structure-property relationships.

Metal–Organic Frameworks as Versatile Platforms for Organometallic Chemistry

Metal–organic frameworks (MOFs) are emerging porous materials with highly tunable structures developed in the 1990s, while organometallic chemistry is of fundamental importance for catalytic transformation in the academic and industrial world for many decades. Through the years, organometallic chemistry has been incorporated into functional MOF construction for diverse applications. Here, we will focus on how organometallic chemistry is applied in MOF design and modifications from linker-centric and metal-cluster-centric perspectives, respectively. Through structural design, MOFs can function as a tailorable platform for traditional organometallic transformations, including reaction of alkenes, cross-coupling reactions, and C–H activations. Besides, an overview will be made on other application categories of organometallic MOFs, such as gas adsorption, magnetism, quantum computing, and therapeutics.

Influence of Pore Structure and Metal-Node Geometry on the Polymerization of Ethylene over Cr-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have received increasing interest as solid single-site catalysts, owing to their tunable pore architecture and metal node geometry. The ability to exploit these modulators makes them prominent candidates for producing polyethylene (PE) materials with narrow dispersity index (Ð) values. Here a study is presented in which the ethylene polymerization properties, with Et2 AlCl as activator, of three renowned Cr-based MOFs, MIL-101(Cr)-NDC (NDC=2,6-dicarboxynapthalene), MIL-53(Cr) and HKUST-1(Cr), are systematically investigated. Ethylene polymerization reactions revealed varying catalytic activities, with MIL-101(Cr)-NDC and MIL-53(Cr) being significantly more active than HKUST-1(Cr). Analysis of the PE products revealed large Ð values, demonstrating that polymerization occurs over a multitude of active Cr centers rather than a singular type of Cr site. Spectroscopic experiments, in the form of powder X-ray diffraction (pXRD), UV/Vis-NIR diffuse reflectance spectroscopy (DRS) and CO probe molecule Fourier transform infrared (FTIR) spectroscopy corroborated these findings, indicating that indeed for each MOF unique active sites are generated, however without alteration of the original oxidation state. Furthermore, the pXRD experiments indicated that one major prerequisite for catalytic activity was the degree of MOF activation by the Et2 AlCl co-catalyst, with the more active materials portraying a larger degree of activation.

Unprecedented Application of Covalent Organic Frameworks for Polymerization Catalysis: Rh/TPB-DMTP-COF in Polymerization of Phenylacetylene and Its Functional Derivatives

Covalent organic frameworks (COFs) are applied widely in organic catalysis; however, no precedent has been reported in polymerization catalysis. Herein, we report the new application of COFs for polymerization catalysis. Different amounts of homogeneous Rh catalyst are incorporated into the COF via post-treatment to give a series of TPB-DMTP-COF-X wt % Rh (b-e) containing varying amounts of Rh from 2.74 to 11.38 wt %. In contrast to the known Rh catalysts, TPB-DMTP-COF-X wt % Rh (b-e) display an uncommon synergistic effect and exceptional steric confinement effect of nanochannels. Therefore, they possess the advantages of both homogeneous catalysts in high activity and selectivity and heterogeneous catalysts in stability and recyclability with extremely high activity up to 1.3 × 10⁷ g·mol_Rh^-1·h^-1 and cis-selectivity up to 99% and can be readily recycled and reused five times in the polymerization of phenylacetylene and its derivatives, affording cis-transoidal polyphenylacetylene and its derivatives having helical structures, aggregation-induced emission properties, or fluorescence properties with narrow molecular weight distributions.

Mechanistic Studies on Photoinduced Catalytic Olefin Migration Reactions at the Pd(II) Centers of a Porous Crystal, Metal-Macrocycle Framework

Porous crystals with well-defined active metal centers on the pore surface have high potential as heterogeneous metal catalysts. We have recently demonstrated that a porous molecular crystal, metal-macrocycle framework (MMF), catalyzes olefin migration reactions by photoactivation of its Pd^II Cl₂ moieties exposed on the crystalline channel surface. Herein we report a mechanistic study of the photoinduced olefin migration reactions at the Pd^II active centers of MMF. Several experiments, including a deuterium scrambling study, revealed that olefin migration is catalyzed via an alkyl mechanism by in situ generated Pd-H species on the channel surface during photoirradiation. This proposed mechanism was further supported by DFT and ONIOM calculations.

Influence of linkers on the Kuratowski-type secondary building unit in nickel single-site MOFs for ethylene oligomerization catalysis: a computational study

Ni-Kuratowski-type MOFs were studied computationally for ethylene oligomerization and the catalytic performance of sterically different linkers was elucidated.

Syntheses, design strategies, and photocatalytic charge dynamics of metal–organic frameworks (MOFs): a catalyzed photo-degradation approach towards organic dyes

The presented review focuses on design strategies to develop tailor-made MOFs/CPs of main group, transition and inner-transition elements and their photocatalytic properties to decompose dyes in wastewater discharge and their photocatalytic mechanism.

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

MOF-74-type frameworks: tunable pore environment and functionality through metal and ligand modification

This highlight demonstrates a comprehensive overview of MOF-74-type frameworks in terms of synthetic approaches and pre- or post-synthetic modification approaches.

100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics

The current global materials economy has long been inefficient due to unproductive reuse and recycling efforts. Within the wider materials portfolio, plastics have been revolutionary to many industries but they have been treated as disposable commodities leading to their increasing accumulation in the environment as waste. The field of chemistry has had significant bearing in ushering in the current plastics industry and will undoubtedly have a hand in transforming it to become more sustainable. Existing approaches include the development of synthetic biodegradable plastics and turning to renewable raw materials in order to produce plastics similar to our current petrol-based materials or to create new polymers. Additionally, chemists are confronting the environmental crisis by developing alternative recycling methods to deal with the legacy of plastic waste. Important emergent technologies, such as catalytic chemical recycling or upcycling, have the potential to alleviate numerous issues related to our current and future refuse and, in doing so, help pivot our materials economy from linearity to circularity.

Recent Progress in Engineering the Atomic and Electronic Structure of Electrocatalysts via Cation Exchange Reactions

In the past few decades, tremendous advances have been made in electrocatalysis due to the rational design of electrocatalysts at the nanoscale level. Further development requires engineering electrocatalysts at the atomic level, which is a grand challenge. Here, the recent advances in cation exchange strategy, which is a powerful tool for fine-tuning atomic structure of electrocatalysts via surface faceting, heteroatom doping, defects formation, and strain modulation, are the main focus. Proper atomic structure engineering effectively adjusts the electronic structure, and thus enhances the electronic conductivity and facilitates the adsorption/desorption of reaction intermediates. By virtue, the cation exchange strategy greatly boosts the intrinsic and apparent activities of electrocatalysts and shows a great potential toward design of new energy conversion devices, such as water splitting devices and metal-air batteries. It is believed that cation exchange offers new insights and opportunities for the rational design of a new generation of electrocatalysts.

Metal-organic framework (MOF) materials as polymerization catalysts: a review and recent advances

Synthetic polymers are ubiquitous across both the industrial and consumer segments of the world economy. Catalysts enable rapid, efficient, selective, and even stereoselective, formation of desired polymers from any of a host of candidate monomers. While numerous molecular catalysts have been shown to be effective for these reactions, separation of the catalysts from reaction products is typically difficult - a potentially problematic complication that suggests instead the use of heterogeneous catalysts. Many of the most effective heterogeneous catalysts, however, comprise supported collections of reaction centres that are decidedly nonuniform in their composition, siting, and activity. Nonuniformity complicates atomic-scale evaluation of the basis for catalytic activity and thus impedes scientific hypothesis-driven understanding and development of superior catalysts. In view of the fundamental desirability of structural and chemical uniformity at the meso, nano, and even atomic scale, crystallographically well-defined, high-porosity metal-organic frameworks (MOFs) have attracted attention as model catalysts and/or catalyst-supports for a wide variety of chemical transformations. In the realm of synthetic polymers, catalyst-functionalized MOFs have been studied for reactions ranging from coordination-mediated polymerization of ethylene to visible-light initiated radical polymerizations. Nevertheless, many polymerization reactions remain to be explored - and, no doubt, will be explored, given the remarkable structural and compositional diversity of attainable MOFs. Noteworthy emerging studies include work directed toward more sophisticated catalytic schemes such as polymer templating using MOF pore architectures and tandem copolymerizations using MOF-supported reaction centres. Finally, it is appropriate to recognize that MOFs themselves are synthetic polymers - albeit, uncoventional ones.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Zirconium-Based Metal-Organic Frameworks for the Catalytic Hydrolysis of Organophosphorus Nerve Agents

Organophoshorus nerve agents are among the most toxic chemicals known to humans, and because of their unfortunate recent use despite international bans, there is an urgent need to develop materials that can effectively degrade these nerve agents. Within the past decade, zirconium-based metal-organic frameworks (Zr-MOFs) have emerged as a bioinspired class of materials capable of rapidly hydrolyzing these compounds and significantly diminishing their toxicity. Both experimental and computational insights have guided the design of Zr-MOFs, leading to the development of catalysts capable of detoxifying nerve agents and simulants, chemicals with similar functionality but lower toxicity, via hydrolysis within seconds in basic aqueous solutions. While these systems are acceptable for the elimination of stockpile weapons, translating this catalytic performance to filters incorporating Zr-MOFs that can be used in masks or protective clothing is not trivial. As such, a large area of focus recently has been targeted toward integrating these hydrolysis catalysts into protective clothing and gear while retaining the performance from solution-based catalytic systems. This Forum Article provides an overview of the development of Zr-MOFs for the catalytic hydrolysis of organophosphorus substrates, including design principles and mechanistic insights for both solution-based and textile-coated systems. Finally, we highlight the remaining challenges yet to be addressed and offer perspectives on the future directions for this field.

Self-supported rhodium catalysts based on a microporous metal–organic framework for polymerization of phenylacetylene and its derivatives

Highly efficient, cis-selective, stable, recyclable and reusable heterogeneous single-site MOF-supported rhodium catalysts polymerize PA and its derivatives, producing cis-transoidal PPAs and their functional derivatives having a helical configuration or AIE properties.

A fast and highly selective Congo red adsorption material based on a cadmium-phosphonate network

This cadmium-phosphonate network exhibited rapid and efficient adsorption of Congo red dye, as well as excellent structural stability and adsorptive recyclability.