Counteranion Driven Homochiral Assembly of a Cationic C3-Symmetric Gelator through Ion-Pair Assisted Hydrogen Bond

2D organic nanosheets of self-assembled guanidinium derivative for efficient single sodium-ion conduction: rationalizing morphology editing and ion conduction

The resurgence of interest in sodium-ion batteries (SIBs) is largely driven by their natural abundance and favourable cost, apart from their comparable electrochemical performance when compared with lithium-ion batteries (LIBs). The uneven geographic distribution of the raw materials required for LIBs has also contributed to this. The solid-state electrolyte (SSE) is typically one of the vital components for energy storage in SIBs and for achieving high electrochemical performances. SSEs are preferred over liquid electrolytes primarily due to their enhanced safety and stability, apart from the option of achieving higher energy density. A single sodium-ion selective conductor minimises dendrite formation and cell polarisation, among many other benefits over binary ionic conductors in battery operation. Here, we demonstrate the first example of a sulfonated supramolecular organic two-dimensional (2D) nanosheet as a novel class of single sodium-ion conductors prepared from the self-assembly of a functionalised guanidinium ion (AD-1). Solvent-assisted exfoliation of the bulk powder in water yielded nanosheet morphology, whereas nanotube morphology was achieved in isopropanol (IPA). In contrast, self-assembly with systematic water/IPA solvent ratio variations produced marigold, sunflower, and nanorod morphologies. Thermodynamic parameters, crystallinity, elemental composition, and varying natures of hydrogen bonding in five distinct morphologies were determined using microscopic and spectroscopic studies. The single Na+ conducting properties of each morphology are correlated in terms of morphology, crystallinity, and the solvent used to achieve that specific morphology. Importantly, with high crystallinity and directional ion channels, 2D nanosheet morphology exhibits the highest single Na+-ion conductivity of 3.72 × 10-4 S cm-1 with an activation energy of 0.28 eV, showing a moderately high Na+-ion transference number of 0.83 at room temperature without incorporating any additional sodium salts and organic solvents. This report is believed to be the first to show the significance of nanostructure morphologies in achieving high single-Na+-ion transport.

Metal-ion-triggered symmetry breaking of completely achiral azobenzene amphiphiles in water

Achieving control over symmetry breaking of completely achiral components in the aqueous phase is a significant challenge in supramolecular chemistry. Herein, we demonstrate that it is possible to construct chiral nanoassemblies by introducing metal ions (Zn2+, Fe3+, Al3+, Cu2+, and Ca2+) into completely achiral azobenzene amphiphiles with key structural factors in the pure aqueous phase. It is found that the coordination interactions, π-π stacking, hydrophilic and hydrophobic interactions, hydrogen bonding, and electrostatic interactions are crucial to the metal-ion-induced symmetry breaking of completely achiral building blocks. This study may provide an intriguing model system for constructing chiral assemblies based on completely achiral molecules.

Self-Assembly of Atomically Precise Silver Nanoclusters in Crowded Colloids into Ultra-Long Ribbons with Tunable Supramolecular Chirality

Atomically precise metal nanoclusters (NCs) emerge as fascinating synthons in self-assembled materials. The self-assembly of metal NCs are highly sensitive to the environment because they have an inorganic-organic hybridized structure and a relatively complicated conformation. Here, it is shown that when confined in crowded colloids, a water-soluble Ag9 -cored nanocluster (Ag9 -NC) can self- assemble into ultra-long (up to millimeters) and photoluminescent ribbons with high flexibility. The ribbon contains rectangularly organized columns of Ag9 -NCs and can undergo secondary self-assembly to form bundled and branched structures. Formation of ribbons is observed in all the tested colloids, including lyotropic liquid crystals and disordered, three-dimensional network. The high viscosity/elasticity of the crowded colloids weakens gravity-induced sedimentation of the ribbons, leading to the formation of an interesting class of inorganic-organic composite materials where the hard Ag-containing skeleton strengthens the soft matter. The simultaneously occurring symmetry breaking during the self-assembly of Ag9 -NCs gives uncontrolled supramolecular chirality, which can be tuned through the majority rule and soldier-and-sergeant rule by the introduction of chiral seeds. The regulated chirality and the intrinsic photoluminescence of the Ag9 -NCs ribbons impart the composite material circularly polarized luminescence, opening the door for a variety of potential applications.

Ultrasound-Directed Symmetry Breaking and Spin Filtering of Supramolecular Assemblies from only Achiral Building Blocks

Herein we describe the self-assembly of an achiral molecule into macroscopic helicity as well as the emergent chiral-selective spin-filtering effect. It was found that a benzene-1,3,5-tricarboxamide (BTA) motif with an aminopyridine group in each arm could coordinate with Ag^I and self-assemble into nanospheres. Upon sonication, symmetry breaking occurred and the nanospheres transferred into helical nanofibers with strong CD signals. Although the sign of the CD signals appeared randomly, it could be controlled by using the as-made chiral assemblies as a seed. Furthermore, it was found that the charge transport of the helical nanofibers was highly selective with a spin-polarization transport of up to 45 %, although the chiral nanofibers are composed exclusively from achiral building blocks. This work demonstrates symmetry breaking under sonication and the chiral-selective spin-filtering effect.

Stimuli-responsive platinum and ruthenium complexes for lung cancer therapy

Lung cancer is the most common cause of cancer-related deaths worldwide. More efficient treatments are desperately needed. For decades, the success of platinum-based anticancer drugs has promoted the exploration of metal-based agents. Four ruthenium-based complexes have also entered clinical trials as candidates of anticancer metallodrugs. However, systemic toxicity, severe side effects and drug-resistance impeded their applications and efficacy. Stimuli-responsiveness of Pt- and Ru-based complexes provide a great chance to weaken the side effects and strengthen the clinical efficacy in drug design. This review provides an overview on the stimuli-responsive Pt- and Ru-based metallic anticancer drugs for lung cancer. They are categorized as endo-stimuli-responsive, exo-stimuli-responsive, and dual-stimuli-responsive prodrugs based on the nature of stimuli. We describe various representative examples of structure, response mechanism, and potential medical applications in lung cancer. In the end, we discuss the future opportunities and challenges in this field.

A combination therapy strategy for treating antibiotic resistant biofilm infection using a guanidinium derivative and nanoparticulate Ag(0) derived hybrid gel conjugate

Bacteria organized in biofilms show significant tolerance to conventional antibiotics compared to their planktonic counterparts and form the basis for chronic infections. Biofilms are composites of different types of extracellular polymeric substances that help in resisting several host-defense measures, including phagocytosis. These are increasingly being recognized as a passive virulence factor that enables many infectious diseases to proliferate and an essential contributing facet to anti-microbial resistance. Thus, inhibition and dispersion of biofilms are linked to addressing the issues associated with therapeutic challenges imposed by biofilms. This report is to address this complex issue using a self-assembled guanidinium-Ag(0) nanoparticle (AD-L@Ag(0)) hybrid gel composite for executing a combination therapy strategy for six difficult to treat biofilm-forming and multidrug-resistant bacteria. Improved efficacy was achieved primarily through effective biofilm inhibition and dispersion by the cationic guanidinium ion derivative, while Ag(0) contributes to the subsequent bactericidal activity on planktonic bacteria. Minimum Inhibitory Concentration (MIC) of the AD-L@Ag(0) formulation was tested against Acinetobacter baumannii (25 μg mL-1), Pseudomonas aeruginosa (0.78 μg mL-1), Staphylococcus aureus (0.19 μg mL-1), Klebsiella pneumoniae (0.78 μg mL-1), Escherichia coli (clinical isolate (6.25 μg mL-1)), Klebsiella pneumoniae (clinical isolate (50 μg mL-1)), Shigella flexneri (clinical isolate (0.39 μg mL-1)) and Streptococcus pneumoniae (6.25 μg mL-1). Minimum bactericidal concentration, and MBIC50 and MBIC90 (Minimum Biofilm Inhibitory Concentration at 50% and 90% reduction, respectively) were evaluated for these pathogens. All these results confirmed the efficacy of the formulation AD-L@Ag(0). Minimum Biofilm Eradication Concentration (MBEC) for the respective pathogens was examined by following the exopolysaccharide quantification method to establish its potency in inhibition of biofilm formation, as well as eradication of mature biofilms. These effects were attributed to the bactericidal effect of AD-L@Ag(0) on biofilm mass-associated bacteria. The observed efficacy of this non-cytotoxic therapeutic combination (AD-L@Ag(0)) was found to be better than that reported in the existing literature for treating extremely drug-resistant bacterial strains, as well as for reducing the bacterial infection load at a surgical site in a small animal BALB/c model. Thus, AD-L@Ag(0) could be a promising candidate for anti-microbial coatings on surgical instruments, wound dressing, tissue engineering, and medical implants.

Fluorescence turn on amine detection in a cationic covalent organic framework

Ionic covalent organic frameworks (iCOFs) are new examples of porous materials and have shown great potential for various applications. When functionalized with suitable emission sites, guest uptake via the ionic moieties of iCOFs can cause a significant change in luminescence, making them excellent candidates for chemosensors. In here, we present a luminescence sensor in the form of an ionic covalent organic framework (TGH⁺•PD) composed of guanidinium and phenanthroline moieties for the detection of ammonia and primary aliphatic amines. TGH⁺•PD exhibits strong emission enhancement in the presence of selective primary amines due to the suppression of intramolecular charge transfer (ICT) with an ultra-low detection limit of 1.2 × 10^‒7 M for ammonia. The presence of ionic moieties makes TGH⁺•PD highly dispersible in water, while deprotonation of the guanidinium moiety by amines restricts its ICT process and signals their presence by enhanced fluorescence emission. The presence of ordered pore walls introduces size selectivity among analyte molecules, and the iCOF has been successfully used to monitor meat products that release biogenic amine vapors upon decomposition due to improper storage.

Ionic covalent organic frameworks (iCOFs) are new examples of porous materials and show great potential for various applications. Here, the authors demonstrate functionalization of an iCOFs with suitable emission sites and application as chemosensor for amine detection with high sensitivity which can be used to monitor meat spoilage.

Supramolecular Chirality from Hierarchical Self-Assembly of Atomically Precise Silver Nanoclusters Induced by Secondary Metal Coordination

Chiral assembly of metal nanoparticles (NPs) into complex superstructures has been widely studied, but their formation mechanisms still remain mysterious due to the lack of precise structural information from the metal-organic interface to metallic kernel. As "molecular models" of metal NPs, atomically precise metal nanoclusters (NCs) used in the assembly of a macroscale superstructure will provide details of microscopic structure for deep understanding of such highly sophisticated assemblies; however, chiral superstructures have not been realized starting from achiral metal NCs with atomic precision. Herein, we report the supramolecular assembly of a water-soluble silver NC ((NH₄)₉[Ag₉(mba)₉], H₂mba = 2-mercaptobenzoic acid, abbreviated as Ag₉-NCs hereafter) into chiral hydrogels induced by the coordination of secondary metal ions. Single crystal X-ray diffraction reveals the triskelion-like structure of Ag₉-NCs with a pseudochiral conformation caused by special arrangement of the peripheral mba^2- ligands. The enantioselective orientation of the peripheral carboxyl group facilitates the assembly of Ag₉-NCs into nanotubes with a chiral cubic (I*) lattice when coordinating to Ba²⁺. The nanotubes can further intertwine into one-dimensional chiral nanobraids with a preferred left-handed arrangement. These multiple levels of chirality can be tuned by drying, during which the I* phase is missing but the chiral entanglement of the nanotubes is enhanced. Through the gelation of atomically precise, achiral NCs coordination of secondary metal ions, chiral amplification of superstructures was realized. The origination of the chirality at different length scales was also discussed.

Benzoate ester as a new species for supramolecular chiral assembly

In this work, a benzoate ester molecule, dodecamethylnonacosane-2,28-diyl dibenzoate (DMNDB), has been discovered as a new species that aggregates into chiral nano-assemblies. In the tetrahydrofuran (THF)/water system, the benzoate ester, DMNDB, could self-assemble into left-handed twisted nanowires, and the most suitable THF/water volume ratio to obtain uniform twisted nanowires was 3 : 7. The driving forces of assembly and the molecular packing type in assemblies for the twisted nanowires were explored, and a possible assembly mechanism was proposed to understand the generation of chiral assemblies. Interestingly, the left-handed nanowires could cross-link and immobilize the solvent in the isopropanol (iPrOH)/water (2 : 8) system to form chiral gels. When the iPrOH/water ratio was increased to 6 : 4, the left-handed nanowires as structural units were found to evolve to right-handed nanofibers. Accordingly, the intermolecular interactions and the molecular packing type also changed with the solvent ratio. What is more, the xerogel could be obtained by drying the gel and left-handed twisted nanowires could form in the THF/water system again, showing the recyclability of chiral nanoassemblies. Also, these DMNDB chiral nanostructures exhibited potential for application in enantioselective separation by co-assembling with tetra-aniline.

Biased Symmetry Breaking and Chiral Control by Self-Replicating in Achiral Tetradentate Platinum (II) Complexes

Obtaining homochirality from biased symmetry-breaking of self-assembly in achiral molecules remains a great challenge due to the lack of ingenious strategies and controlling their handedness. Here, we report the first case of biased symmetry breaking from achiral platinum (II) liquid crystals which self-organize into an enantiomerically enriched single domain without selection of handedness in twist grain boundary TGB ^[ *^] phase. Most importantly, the chiral control of self-organization can be achieved by using above the homochiral liquid crystal films with determined handedness (P or M) as a template. Moreover, benefiting from self-assembled superhelix, these complexes exhibit prominent circularly polarized luminescence with high |g_lum | up to 3.4×10^-3 in the TGB ^[ *^] mesophase. This work paves a neoteric avenue for the development of chiral self-assemblies from achiral molecules.

Deciphering the evolution of supramolecular nanofibers in solution and solid-state: a combined microscopic and spectroscopic approach

Supramolecular self-assembly of small organic molecules has emerged as a powerful tool to construct well-defined micro- and nanoarchitecture through fine-tuning a range of intermolecular interactions. The size, shape, and optical properties of these nanostructures largely depend on the specific assembly of the molecular building units, temperature and polarity of the medium, and external stimuli. The engineering of supramolecular self-assembled nanostructures with morphology-dependent tunable emission is in high demand due to the promising scope in nanodevices and molecular machines. However, probing the evolution of molecular aggregates from the solution and directing the self-assembly process in a pre-defined fashion are challenging. In the present study, we have deciphered the sequential evolution of supramolecular nanofibers from solution to spherical and oblong-shaped nanoparticles through the variation of solvent polarity, tuning the hydrophobic-hydrophilic interactions. An intriguing case of molecular self-assembly has been elucidated employing a newly designed π-conjugated thiophene derivative (TPAn) through a combination of steady-state absorption, emission measurements, fluorescence correlation spectroscopy (FCS), and electron microscopy. The FCS analysis and microscopy results revealed that the small-sized nanofibers in the dispersion further agglomerated upon solvent evaporation, resulting in a network of nanofibers. Stimuli-responsive reversible interconversion between a network of nanofibers and spherical nanoaggregates was probed both in dispersion and solvent-evaporated state. The evolution of organic nanofibers and a subtle control over the self-assembly process demonstrated in the current investigation provide a general paradigm to correlate the size, shape, and emission properties of fluorescent molecular aggregates in complex heterogeneous media, including a human cell.

1D Mn(III) coordination polymers exhibiting chiral symmetry breaking and weak ferromagnetism

Mn(iii) complexes with achiral ligands, (E)-N-(2-((2-aminobenzylidene)amino)-2-methylpropyl)-5-X-2-hydroxybenzamide (HLX, X = H, Cl, Br, and I), crystallise as chiral conglomerates containing amide oxygen-bridged one-dimensional coordination polymers that exhibit weak ferromagnetism. The bulk products exhibit symmetry breaking in that they do not contain equal amounts of enantiomers, though which is the dominant species depends on the substituent X.

Circularly Polarized Luminescence in Nanoassemblies: Generation, Amplification, and Application

Currently, the development of circularly polarized luminescent (CPL) materials has drawn extensive attention due to the numerous potential applications in optical data storage, displays, backlights in 3D displays, and so on. While the fabrication of CPL-active materials generally requires chiral luminescent molecules, the introduction of the "self-assembly" concept offers a new perspective in obtaining the CPL-active materials. Following this approach, various self-assembled materials, including organic-, inorganic-, and hybrid systems can be endowed with CPL properties. Benefiting from the advantages of self-assembly, not only chiral molecules, but also achiral species, as well as inorganic nanoparticles have potential to be self-assembled into chiral nanoassemblies showing CPL activity. In addition, the dissymmetry factor, an important parameter of CPL materials, can be enhanced through various pathways of self-assembly. Here, the present status and progress of self-assembled nanomaterials with CPL activity are reviewed. An overview of the key factors in regulating chiral emission materials at the supramolecular level will largely boost their application in multidisciplinary fields.

Self-Assembled Helical Arrays for the Stabilization of the Triplet State

Room-temperature phosphorescence of metal and heavy atom-free organic molecules has emerged as an area of great potential in recent years. A rational design played a critical role in controlling the molecular ordering to impart efficient intersystem crossing and stabilize the triplet state to achieve room-temperature ultralong phosphorescence. However, in most cases, the strategies to strengthen phosphorescence efficiency have resulted in a reduced lifetime, and the available nearly degenerate singlet-triplet energy levels impart a natural competition between delayed fluorescence and phosphorescence, with the former one having the advantage. Herein, an organic helical assembly supports the exhibition of an ultralong phosphorescence lifetime. In contrary to other molecules, 3,6-phenylmethanone functionalized 9-hexylcarbazole exhibits a remarkable improvement in phosphorescence lifetime (>4.1 s) and quantum yield (11 %) owing to an efficient molecular packing in the crystal state. A right-handed helical molecular array act as a trap and exhibits triplet exciton migration to support the exceptionally longer phosphorescence lifetime.

Guest-induced supramolecular chirality transfer in [2]pseudorotaxanes: experimental and computational study

To reveal the factors governing the chirality transfer from a chiral unimolecule to a supramolecular assembly, we constructed a series of [2]pseudorotaxanes through the intermolecular noncovalent interaction of a pair of chiral binaphthalene crown ethers with achiral secondary ammonium salts with different chromophores, and found that the binaphthalene groups can induce new circular dichroism (CD) signals only in the [2]pseudorotaxane structures between the host crown ethers and the guest molecule with the anthryl group. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations show that the generation of the new CD signal is mainly due to the intermolecular chiral induction between the anthryl group in the guest and the naphthalene groups in the host.

Fluorophoric [2]rotaxanes: post-synthetic functionalization, conformational fluxionality and metal ion chelation

Fluorophoric [2]rotaxanes form an exciplex upon interpenetration and the exciplex signals are used to monitor the chelation properties of the interlocked systems.

Symmetry Breaking in Self-Assembled Nanoassemblies

The origin of biological homochirality, e.g., life selects the L-amino acids and D-sugar as molecular component, still remains a big mystery. It is suggested that mirror symmetry breaking plays an important role. Recent researches show that symmetry breaking can also occur at a supramolecular level, where the non-covalent bond was crucial. In these systems, equal or unequal amount of the enantiomeric nanoassemblies could be formed from achiral molecules. In this paper, we presented a brief overview regarding the symmetry breaking from dispersed system to gels, solids, and at interfaces. Then we discuss the rational manipulation of supramolecular chirality on how to induce and control the homochirality in the self-assembly system. Those physical control methods, such as Viedma ripening, hydrodynamic macro- and micro-vortex, superchiral light, and the combination of these technologies, are specifically discussed. It is hoped that the symmetry breaking at a supramolecular level could provide useful insights into the understanding of natural homochirality and further designing as well as controlling of functional chiral materials.

Impact of "half-crown/two carbonyl"-Ca2+ metal ion interactions of a low molecular weight gelator (LMWG) on its fiber to nanosphere morphology transformation with a gel-to-sol phase transition

We report here a smart functional low molecular weight gelator (LMWG) L, containing an unusual metal ion coordination site, i.e. "half-crown/two carbonyl". The gelator L shows excellent gelation behavior with typical fibrillar morphology in acetonitrile, methanol and ethanol media. Upon Ca2+ ion binding with its "half-crown/two carbonyl" coordination site, the acetonitrile gel of L exhibits a fiber to nanosphere morphology transformation along with a gel-to-sol phase transition as confirmed by microscopic investigation and by direct naked eye visualization, respectively. The mechanism involved in this morphology transformation and gel-to-sol phase transition process was studied thoroughly with the help of computational calculations and various spectroscopic experiments and discussed.

Water induced morphological transformation of a poly(aryl ether) dendron amphiphile: helical fibers to nanorods, as light-harvesting antenna systems

Self-assembly of suitable molecular building blocks is an efficient and convenient approach to generate nanomaterials with various morphologies and functions. Moreover, understanding the nature of molecules and controlling factors of their self-assembly process is crucial in fundamental aspects of molecular self-assembly which provide insights into the design of new assemblies with functional nano-architectures. To this end, the present study reports water induced self-assembled multifaceted morphology formation and the plausible pathway of the morphology transformation of a single poly(aryl ether) dendron amphiphile 1(D). In THF, 1(D) self-assembles into helical fibers. However, with an increase in the water fraction in its THF solution, the morphology changes to nanorods through an intermediate scroll-up pathway of exfoliated fibers. The nanorod formation and transformation of 1(D) are investigated using various microscopy and spectroscopy techniques, which indicate that it has highly ordered multilayered arrays of 1(D) molecules. Finally, these multilayered arrays of 1(D) nanorods are exploited for constructing a model light-harvesting system via the incorporation of small quantities of two newly designed BODIPY based molecules as energy acceptors and 1(D) as an antenna chromophore.

Supramolecular gelatons: towards the design of molecular gels

The concept of supramolecular gelatons for the design of gels was proposed and described.

Anion-dependent thermo-responsive supramolecular superstructures of Cu(ii) macrocycles

A heteroditopic ligand predominantly self-assembled into a dinuclear Cu(ii) macrocycle with various Cu²⁺ salts. However, each macrocycle is further hierarchically assembled to distinct supramolecular superstructures, where the shape of the morphology is found to be highly dependent on the counter-anions and temperature.

Fabrication of chiroptically switchable films via co-gelation of a small chiral gelator with an achiral azobenzene-containing polymer

Helical polymers are widely found in nature and synthetic functional materials. Although a number of elaborate strategies have been developed to endow polymers with helicity through either covalent bonds or supramolecular techniques, it still remains a challenge to get the desired helical polymers with controlled handedness in an easy but effective manner. In this study, we report an easily accessible gelation-guided self-assembly system where the chirality of a gelator can be easily transferred to an achiral azobenzene-containing polymer during gelation. It is found that during the process of chiral induction, the induced chirality of the polymer was entirely dominated by the molecular chirality of the gelator. Experimentally, achiral azobenzene-containing polymers with different side-chain lengths were doped into a supramolecular gel system formed with amphiphilic N,N'-bis-(octadecyl)-l(d)-Boc-glutamic (LBG-18 or DBG-18 for short). CD spectra and SEM observation confirmed that the co-assembly of polymer/LBG-18 or polymer/DBG-18 in the xerogel state exhibited supramolecular chirality. More importantly, alternate UV and visible light irradiation on the xerogel film caused the induced CD signal to switch between on and off states. Thus a chiroptical switch was fabricated based on the isomerization of the azo-polymer in xerogel films.

Circularly Polarized Light with Sense and Wavelengths To Regulate Azobenzene Supramolecular Chirality in Optofluidic Medium

Circularly polarized light (CPL) as a massless physical force causes absolute asymmetric photosynthesis, photodestruction, and photoresolution. CPL handedness has long been believed to be the determining factor in the resulting product's chirality. However, product chirality as a function of the CPL handedness, irradiation wavelength, and irradiation time has not yet been studied systematically. Herein, we investigate this topic using achiral polymethacrylate carrying achiral azobenzene as micrometer-size aggregates in an optofluidic medium with a tuned refractive index. Azobenzene chirality with a high degree of dissymmetry ratio (±1.3 × 10^-2 at 313 nm) was generated, inverted, and switched in multiple cycles by irradiation with monochromatic incoherent CPL (313, 365, 405, and 436 nm) for 20 s using a weak incoherent light source (≈ 30 μW·cm^-2). Moreover, the optical activity was retained for over 1 week in the dark. Photoinduced chirality was swapped by the irradiating wavelength, regardless of whether the CPL sense was the same. This scenario is similar to the so-called Cotton effect, which was first described in 1895. The tandem choice of both CPL sense and its wavelength was crucial for azobenzene chirality. Our experimental proof and theoretical simulation should provide new insight into the chirality of CPL-controlled molecules, supramolecules, and polymers.

Understanding Pathway Complexity of Organic Micro/Nanofiber Growth in Hydrogen-Bonded Coassembly of Aromatic Amino Acids

Rational engineering of one-dimensional (1D) self-assembled aggregates to produce desired materials for versatile functions remains a challenge. In this work, we report the noncovalent modulation of 1D aggregates at the micro/nanoscale using a coassembly protocol. Aromatic amino acids were employed as the model building blocks, and melamine (Mm) behaves as a modulator to form coassembly arrays with aromatic amino acids selectively. The selective self-assembly behavior between aromatic amino acids and Mm allows distinguishing and detecting Mm and aromatic amino acids from their analogues in macroscopic and microscopic scales. Dimensions and sizes of fibrous aggregates prepared from different amino acids show two opposite pathways from pristine assemblies to coassemblies induced by the addition of Mm. This pathway complexity could be controlled by the molecular conformation determined by α-positioned substituents. The developed hypothesis presents an excellent expansibility to other substrates, which may guide us to rationally design and screen 1D materials with different dimensions and sizes including the production of high-quality self-standing hydrogels.

Unexpected right-handed helical nanostructures co-assembled from l-phenylalanine derivatives and achiral bipyridines

Achiral bipyridines can co-assemble with l-phenylalanine derivatives into unexpected right-handed helical nanostructures rather than left-handed helix by utilizing intermolecular hydrogen bonding formed between pyridyl and carboxylic groups.

The construction of chiral supramolecular systems with desirable handedness is of great importance in materials science, chemistry, and biology since chiral nanostructures exhibit fascinating photophysical properties and unique biological effects. Herein, we report that achiral bipyridines can co-assemble with l-phenylalanine derivatives into unexpected right-handed helical nanostructures rather than a left-handed helix via intermolecular hydrogen bonding interactions formed between the pyridyl and carboxylic groups. This study opens up a route to develop chiral nanostructures with desirable handedness via the co-assembly of simple molecular building blocks and provides a straightforward insight into the chirality control of nanostructures in supramolecular systems.