Genetically Encoded Fluorescent RNA Sensor for Ratiometric Imaging of MicroRNA in Living Tumor Cells

Luminescent metal nanoclusters and their application in bioimaging

Owing to their unique optical properties and atomically precise structures, metal nanoclusters (MNCs) constitute a new generation of optical probe materials. This mini-review provides a brief overview of luminescence mechanisms and modulation methods of luminescent metal nanoclusters in recent years. Based on these photophysical phenomena, the applications of cluster-based optical probes in optical bioimaging and related sensing, disease diagnosis, and treatment are summarized. Some challenges are also listed at the end.

Multiplexed sequential imaging in living cells with orthogonal fluorogenic RNA aptamer/dye pairs

Detecting multiple targets in living cells is important in cell biology. However, multiplexed fluorescence imaging beyond two-to-three targets remains a technical challenge. Herein, we introduce a multiplexed imaging strategy, 'sequential Fluorogenic RNA Imaging-Enabled Sensor' (seqFRIES), which enables live-cell target detection via sequential rounds of imaging-and-stripping. In seqFRIES, multiple orthogonal fluorogenic RNA aptamers are genetically encoded inside cells, and then the corresponding cell membrane permeable dye molecules are added, imaged, and rapidly removed in consecutive detection cycles. As a proof-of-concept, we have identified in this study four fluorogenic RNA aptamer/dye pairs that can be used for highly orthogonal and multiplexed imaging in living bacterial and mammalian cells. After further optimizing the cellular fluorescence activation and deactivation kinetics of these RNA/dye pairs, the whole four-color semi-quantitative seqFRIES process can be completed in ∼20 min. Meanwhile, seqFRIES-mediated simultaneous detection of critical signalling molecules and mRNA targets was also achieved within individual living cells. We expect our validation of this new seqFRIES concept here will facilitate the further development and potential broad usage of these orthogonal fluorogenic RNA/dye pairs for multiplexed and dynamic live-cell imaging and cell biology studies.

Rapid one-pot isothermal amplification reassembled of fluorescent RNA aptamer for SARS-CoV-2 detection

The outbreak of SARS-CoV-2 poses a serious threat to human life and health. A rapid nucleic acid tests can effectively curb the spread of the disease. With the advantages of fluorescent RNA aptamers, low background and high sensitivity. A variety of fluorescent RNA aptamer sensors have been developed for the detection of nucleic acid. Here, we report a hypersensitive detection platform in which SARS-CoV-2 initiates RTF-EXPAR to amplify trigger fragments. This activation leads to the reassembled of the SRB2 fluorescent RNA aptamer, restoring its secondary structure for SR-DN binding and turn-on fluorescence. The platform completes the assay in 30 min and all reactions occur in one tube. The detection limit is as low as 116 aM. Significantly, the platform's quantitative analyses were almost identical to qPCR results in simulated tests of positive samples. In conclusion, the platform is sensitive, accurate and provides a new protocol for point-of-care testing of viruses.

Simulation-Guided Rational Design of DNA Walker-Based Theranostic Platform

Biomolecule-functionalized nanoparticles represent a type of promising biomaterials in biomedical applications owing to their excellent biocompatibility and versatility. DNA-based reactions on nanoparticles have enabled emerging applications including intelligent biosensors, drug delivery, and biomimetic devices. Among the reactions, strand hybridization is the critical step to control the sensitivity and specificity of biosensing, and the efficiency of drug delivery. However, a comprehensive understanding of DNA hybridization on nanoparticles is still lacking, which may differ from the process in homogeneous solutions. To address this limitation, coarse-grained model-based molecular dynamic simulation is harnessed to disclose the critical factors involved in intermolecular hybridization. Based on simulation guidance, DNA walker-based smart theranostic platform (DWTP) based on "on-particle" hybridization is developed, showing excellent consistency with simulation. DWTP is successfully applied for highly sensitive miRNA 21 detection and tumor-specific miRNA 21 imaging, driven by tumor-endogenous APE 1 enzyme. It enables the precise release of antisense oligonucleotide triggered by tumor-endogenous dual-switch miRNA 21 and APE 1, facilitating effective gene silencing therapy with high biosafety. The simulation of "on-particle" DNA hybridization has improved the corresponding biosensing performance and the release efficiency of therapeutic agents, representing a conceptually new approach for DNA-based device design.

Binary split fluorescent biosensor based on lettuce DNA aptamer for label-free and enzyme-free analysis of hepatitis B viral DNA

Hepatitis B virus (HBV) acts as a severe public health threat, causing chronic liver diseases. Although the quantified evaluation of HBV infection can be obtained by estimating the capacity of the HBV DNA genome, it still lacks an effective and robust detection method without using enzymes or chemical labeling. Herein, we have designed a binary split fluorescent DNA aptasensor (bsFDA) by rationally splitting the lettuce aptamer into two functional DNA short chains and utilizing the HBV DNA segment complementary sequences (HDs). In this strategy, the bsFDA has been investigated to specifically recognize the HDs, forming a triplex DNA with the lettuce aptamer structure. Meanwhile, the turn-on fluorescence of bsFDA is obtained upon formation of a fluorescent complex between DFHO and the triplex DNA structure, allowing the enzyme-free, label-free, fast-responsive, and reliable fluorescence readout for detecting HDs and the potential HDs mutants. Moreover, bsFDA has been applied for spiked HDs analysis in different real matrixes, including human serum and cell lysate. The satisfactory recovery rates and reproducibility of the bsFDA reveal its potential detection efficacy for HDs analysis in biological samples. Overall, bsFDA holds great potential in developing functionalized aptasensors and realizing viral genome analysis in biological research.

Aptamer and Thiol Co-Regulated Color-Shifting Fluorophores via Dynamic Through-Bond/Space Conjugation for Constructing Ratiometric RNA Sensor

Fluorophores with color-shifting characteristics have attracted enormous research interest in the quantitative application of RNA sensors. It reports here a simple synthesis, luminescent properties, and co-transcription ability of de-conjugated triphenylmethane leucomalachite green (LMG). This novel clusteroluminescence fluorophore is rapidly synthesized from malachite green (MG) in reductive transcription system containing dithiothreitol, emitting fluorescence in the UV region through space conjugation. The co-transcribed MG RNA aptamer (MGA) bound to the ligand, resulting in red fluorescence from the through-bond conjugation. Given the equilibrated color-shifting fluorophores, they are rationally employed in a 3WJ-based rolling circle transcription switch, with the target-aptamer acting as an activator to achieve steric allosterism. This one-pot system allows the target to compete continuously for allosteric sites, and the activated transcription switches continue to amplify MGA forward, achieving accurate Aflatoxin 1 quantification at the picomolar level in 1 h. Due to the programmability of this RNA sensor, the design method of target-competitive aptamers is standardized, making it universally applicable.

Recent advances in living cell nucleic acid probes based on nanomaterials for early cancer diagnosis

The early diagnosis of cancer is vital for effective treatment and improved prognosis. Tumor biomarkers, which can be used for the early diagnosis, treatment, and prognostic evaluation of cancer, have emerged as a topic of intense research interest in recent years. Nucleic acid, as a type of tumor biomarker, contains vital genetic information, which is of great significance for the occurrence and development of cancer. Currently, living cell nucleic acid probes, which enable the in situ imaging and dynamic monitoring of nucleic acids, have become a rapidly developing field. This review focuses on living cell nucleic acid probes that can be used for the early diagnosis of tumors. We describe the fundamental design of the probe in terms of three units and focus on the roles of different nanomaterials in probe delivery.

In Vivo Imaging MicroRNA with Bright Fluorescent RNA Aptamer Through Target-Mediated Entropy-Driven Toehold Exchange

MicroRNAs (miRNAs) play vital roles in biological activities, but their in vivo imaging is still challenging due to the low abundance and the lack of efficient fluorescent tools. RNA aptamers with high affinity and low background emerge for bioimaging yet suffering from low brightness. We introduce a rational design based on target-mediated entropy-driven toehold exchange (EDTE) to induce the release of RNA aptamer and subsequently light up corresponding fluorophore, which achieves selective imaging of miRNAs with good stability in both living cells and tumor-bearing mouse. Through tailoring recognition unit of the EDTE probes, highly sensitive imaging of different miRNAs including miRNA-125b and miRNA-21 is achieved, confirming its universal bioimaging applications. In comparison with the reported "one-to-one" model, the EDTE strategy shows a remarkable 4.6-time improvement in signal/noise ratio for intracellular imaging of the same miRNA. Particularly, it realizes sensitive imaging of miRNA in vivo, providing a promising tool in investigating functions and interactions of disease-associated miRNAs.

PCR Independent Strategy-Based Biosensors for RNA Detection

RNA is an important information and functional molecule. It can respond to the regulation of life processes and is also a key molecule in gene expression and regulation. Therefore, RNA detection technology has been widely used in many fields, especially in disease diagnosis, medical research, genetic engineering and other fields. However, the current RT-qPCR for RNA detection is complex, costly and requires the support of professional technicians, resulting in it not having great potential for rapid application in the field. PCR-free techniques are the most attractive alternative. They are a low-cost, simple operation method and do not require the support of large instruments, providing a new concept for the development of new RNA detection methods. This article reviews current PCR-free methods, overviews reported RNA biosensors based on electrochemistry, SPR, microfluidics, nanomaterials and CRISPR, and discusses their challenges and future research prospects in RNA detection.

An RNA origami robot that traps and releases a fluorescent aptamer

RNA nanotechnology aims to use RNA as a programmable material to create self-assembling nanodevices for application in medicine and synthetic biology. The main challenge is to develop advanced RNA robotic devices that both sense, compute, and actuate to obtain enhanced control over molecular processes. Here, we use the RNA origami method to prototype an RNA robotic device, named the "Traptamer," that mechanically traps the fluorescent aptamer, iSpinach. The Traptamer is shown to sense two RNA key strands, acts as a Boolean AND gate, and reversibly controls the fluorescence of the iSpinach aptamer. Cryo-electron microscopy of the closed Traptamer structure at 5.45-angstrom resolution reveals the mechanical mode of distortion of the iSpinach motif. Our study suggests a general approach to distorting RNA motifs and a path forward to build sophisticated RNA machines that through sensing, computing, and actuation modules can be used to precisely control RNA functionalities in cellular systems.

Aptamer-Modified Homogeneous Catalysts, Heterogenous Nanoparticle Catalysts, and Photocatalysts: Functional "Nucleoapzymes", "Aptananozymes", and "Photoaptazymes"

Conjugation of aptamers to homogeneous catalysts ("nucleoapzymes"), heterogeneous nanoparticle catalysts ("aptananozymes"), and photocatalysts ("photoaptazymes") yields superior catalytic/photocatalytic hybrid nanostructures emulating functions of native enzymes and photosystems. The concentration of the substrate in proximity to the catalytic sites ("molarity effect") or spatial concentration of electron-acceptor units in spatial proximity to the photosensitizers, by aptamer-ligand complexes, leads to enhanced catalytic/photocatalytic efficacies of the hybrid nanostructures. This is exemplified by sets of "nucleoapzymes" composed of aptamers conjugated to the hemin/G-quadruplex DNAzymes or metal-ligand complexes as catalysts, catalyzing the oxidation of dopamine to aminochrome, oxygen-insertion into the Ar─H moiety of tyrosinamide and the subsequent oxidation of the catechol product into aminochrome, or the hydrolysis of esters or ATP. Also, aptananozymes consisting of aptamers conjugated to Cu2+ - or Ce4+ -ion-modified C-dots or polyadenine-stabilized Au nanoparticles acting as catalysts oxidizing dopamine or operating bioreactor biocatalytic cascades, are demonstrated. In addition, aptamers conjugated to the Ru(II)-tris-bipyridine photosensitizer or the Zn(II) protoporphyrin IX photosensitizer provide supramolecular photoaptazyme assemblies emulating native photosynthetic reaction centers. Effective photoinduced electron transfer followed by the catalyzed synthesis of NADPH or the evolution of H2 is demonstrated by the photosystems. Structure-function relationships dictate the catalytic and photocatalytic efficacies of the systems.

Optimization of RNA Pepper Sensors for the Detection of Arbitrary RNA Targets

The development of fluorescent light-up RNA aptamers (FLAPs) has paved the way for the creation of sensors to track RNA in live cells. A major challenge with FLAP sensors is their brightness and limited signal-to-background ratio both in vivo and in vitro. To address this, we develop sensors using the Pepper aptamer, which exhibits superior brightness and photostability when compared to other FLAPs. The sensors are designed to fold into a low fluorescence conformation and to switch to a high fluorescence conformation through toehold or loop-mediated interactions with their RNA target. Our sensors detect RNA targets as short as 20 nucleotides in length with a wide dynamic range over 300-fold in vitro, and we describe strategies for optimizing the sensor's performance for any given RNA target. To demonstrate the versatility of our design approach, we generated Pepper sensors for a range of specific, biologically relevant RNA sequences. Our design and optimization strategies are portable to other FLAPs and offer a promising foundation for future development of RNA sensors with high specificity and sensitivity for detecting RNA biomarkers with multiple applications.

Ratiometric fluorescent and electrochemiluminescent dual modal assay for detection of 2,6-pyridinedicarboxylic acid as an anthrax biomarker

2,6-pyridinedicarboxylic acid (DPA) is an excellent biomarker of Bacillus anthracis (B. anthracis). The sensitive detection of DPA, especially through visual point-of-care testing, was significant for accurate and rapid diagnosis of anthrax to timely prevent anthrax disease or biological terrorist attack. Herein, a ratiometric fluorescent (R-FL) and electrochemiluminescent (ECL) dual-mode detection platform with a lanthanide ion-based metal-organic framework (Ln-MOF, i.e., M/Y-X: M = Eu, Y = Tb, and X = 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid) was developed. Eu/Tb-TATAB nanoparticles were constructed to identify DPA. The R-FL detection platform quantitatively detected DPA by monitoring the I545/I617 ratio of the characteristic fluorescence peak intensities of Tb3+ ions and Eu3+ ions. The ECL sensing platform successfully quantified DPA by exploiting the burst effect of DPA on the ECL signal. The above methods had highly sensitive and rapid detection of DPA in water and serum samples. The results showed that this dual-mode detection platform may be projected to be a powerful instrument for preventing related biological warfare and bio-terrorism.

One-step synthesis of a dual-functional AIE-active probe for ClO- detection and photodynamic therapy

An amphiphilic fluorescent probe (BHSMP) with aggregation-induced emission (AIE) features was synthesized via a one-step route. The probe showed high water dispersibility, low toxicity and the ability of selective and sensitive (limit of detection of 0.11 µM) detection of ClO- with fast-response (≤30 s) in aqueous solution and living organisms. Owing to the donor-acceptor (D-A) structure and existence of cationic groups, BHSMP could also generate reactive oxygen species under light-irradiation and potentially be utilized for photodynamic therapy. The strategy described in this work is of great significance for the design and synthesis of multifunctional AIE-active functional materials to facilitate their biomedical applications.

Engineered aptamers for molecular imaging

Molecular imaging, including quantification and molecular interaction studies, plays a crucial role in visualizing and analysing molecular events occurring within cells or organisms, thus facilitating the understanding of biological processes. Moreover, molecular imaging offers promising applications for early disease diagnosis and therapeutic evaluation. Aptamers are oligonucleotides that can recognize targets with a high affinity and specificity by folding themselves into various three-dimensional structures, thus serving as ideal molecular recognition elements in molecular imaging. This review summarizes the commonly employed aptamers in molecular imaging and outlines the prevalent design approaches for their applications. Furthermore, it highlights the successful application of aptamers to a wide range of targets and imaging modalities. Finally, the review concludes with a forward-looking perspective on future advancements in aptamer-based molecular imaging.

A universal orthogonal imaging platform for living-cell RNA detection using fluorogenic RNA aptamers

MicroRNAs (miRNAs) are crucial regulators of gene expression at the post-transcriptional level, offering valuable insights into disease mechanisms and prospects for targeted therapeutic interventions. Herein, we present a class of miRNA-induced light-up RNA sensors (miLS) that are founded on the toehold mediated principle and employ the fluorogenic RNA aptamers Pepper and Squash as imaging modules. By incorporating a sensor switch to disrupt the stabilizing stem of these aptamers, our design offers enhanced flexibility and convertibility for different target miRNAs and aptamers. These sensors detect multiple miRNA targets (miR-21 and miR-122) with detection limits of 0.48 and 0.2 nM, respectively, while achieving a robust signal-to-noise ratio of up to 44 times. Capitalizing on the distinct fluorescence imaging channels afforded by Pepper-HBC620 (red) and Squash-DFHBI-1T (green), we establish an orthogonal miRNA activation imaging platform, enabling the simultaneous visualization of different intracellular miRNAs in living cells. Our dual-color orthogonal miLS imaging platform provides a powerful tool for sequence-specific miRNA imaging in different cells, opening up new avenues for studying the intricate functions of RNA in living cells.

Genetically Encoded RNA Sensors for Ratiometric and Multiplexed Imaging of Small Molecules in Living Cells

Genetically encoded sensors afford powerful tools for studying small molecules and metabolites in live cells. However, genetically encoded sensors with a general design remain to be developed. Here we develop genetically encoded RNA sensors with a modular design for ratiometric and multiplexed imaging of small molecules in live cells. The sensor utilizes aptazyme as a recognition module and the light-up RNA aptamer as a signal reporter. The conformation of light-up aptamers is abrogated by a blocking sequence, and aptazyme-mediated cleavage restores the correct conformation, delivering activated fluorescence for small molecule imaging. We first developed a genetically encoded ratiometric sensor using Mango aptamer as a reference and SRB2 as a reporter. It is shown that the sensor allows quantitative imaging and detection of theophylline in live cells. The generality of the design is further demonstrated for imaging other small molecules by replacing the aptazymes. Its ability for multiplexed imaging of small molecules is further explored via the integration of different small-molecule responsive aptazymes and light-up RNA aptamers. This modular design could offer a versatile platform for imaging diverse molecules in living cells.

Programmable, Structure-Switching RhoBAST for Hybridization-Mediated mRNA Imaging in Living Cells

The development of fluorescent probes for visualizing endogenous RNAs in living cells is crucial to understand their complex biochemical roles. Recently, we developed RhoBAST, one of the most photostable and brightest fluorescence light-up aptamers (FLAPs), as a genetically encoded tag for imaging messenger RNAs (mRNAs). Here, we describe programmable RhoBAST sequences flanked by target-binding hybridization arms that light up only when bound to the untagged target RNA in trans. As part of the hybridization arm, we introduced a modular transducer sequence that switches the secondary structure of RhoBAST and renders it incapable of binding to its fluorogenic ligand TMR-DN. Only the specific binding of the hybridization arms to the target RNA triggers the correct folding of RhoBAST and fluorescence light-up after binding to TMR-DN. We characterized the structural switching of programmable RhoBAST sequences extensively in vitro and applied them to visualize untagged mRNAs in live bacteria.

Ultrasensitive MicroRNA Photoelectric Assay Based on a Mimosa-like CdS-NiS/Au Schottky Junction

Seeking and constructing superior photoactive materials have the potential to improve the performance of photoelectrochemical (PEC) biosensors. In this work, we proposed a novel mimosa-like ternary inorganic composite with a significantly enhanced light-harvesting ability and photogenerated carrier separation rate. This ternary photoactive material was obtained via electrodeposition of gold nanoparticles (Au) on the surface of transition metal sulfide composite of CdS and NiS (CdS-NiS/Au). The experimental results showed that the high initial photocurrent was acquired on CdS-NiS/Au (68-fold higher than that of individual CdS) with the synergistic effect of p-n heterojunction, Schottky junction, and the eminent optical properties of gold nanoparticles. Meanwhile, using silver nanoclusters prepared by link DNA protection as an effective quencher, integrating the duplex-specific nuclease-assisted rolling circle amplification strategy, a "Signal ON" PEC biosensor was fabricated for the detection of microRNA 21 (miRNA 21). With the release of the quencher, the recovered photocurrent is able to achieve determination of miRNA 21 within the range from 10 aM to 1 pM with a detection limit down to 4.6 aM (3σ). Importantly, this work not only provides a superb idea for designing ternary inorganic heteromaterials with exceptional photoactive ability but also allows the detection of other biomarkers by selecting appropriate recognition units.

Reversible Acylation of RNA Enables Activatable Biosensing

There is a high demand to develop chemical tools to control the property and function of RNA. Current methods mainly rely on ultraviolet light-based caging strategies, which may cause phototoxicity in live cell-based experiments. We herein report an endogenous stimulus-responsive RNA acylation approach by introducing boronate ester (BE) groups to 2'-hydroxyls through postsynthetic modification. Treatment with hydrogen peroxide (H₂O₂) yields a phenol derivative which undergoes a 1,6-eliminaton for the traceless release of 2'-hydroxyl. We demonstrated that the acylation of crRNA enabled conditional regulation of CRISPR/Cas13a activity for activatable detection of target RNA. We also showed that the highly specific acylation of the single RNA in 8-17 DNAzyme allowed reversible control of the catalytic activity of DNAzyme, which was further applied to the cell-selective imaging of metal ions in cancer cells. Thus, our strategy provides a simple, general, and cell-selective method to control RNA activity, affording great potential in the construction of activatable RNA sensors and pre-RNA medicines.

Tailoring a Minimal Self-Replicate DNA Circuit for Highly Efficient Intracellular Imaging of microRNA

Trace analyte detection in complex intracellular environment requires the development of simple yet robust self-sufficient molecular circuits with high signal-gain and anti-interference features. Herein, a minimal non-enzymatic self-replicate DNA circuitry (SDC) system is proposed with high-signal-gain for highly efficient biosensing in living cells. It is facilely engineered through the self-stacking of only one elementary cascade hybridization reaction (CHR), thus is encoding with more economic yet effective amplification pathways and reactants. Trigger (T) stimulates the activation of CHR for producing numerous T replica that reversely motivate new CHR reaction cycles, thus achieving the successive self-replication of CHR system with an exponentially magnified readout signal. The intrinsic self-replicate circuity design and the self-accelerated reaction format of SDC system is experimentally demonstrated and theoretically simulated. With simple circuitry configuration and low reactant complexity, the SDC amplifier enables the high-contrast and accurate visualization of microRNA (miRNA), ascribing to its robust molecular recognition and self-sufficient signal amplification, thus offering a promising strategy for monitoring these clinically significant analytes.

Bioorthogonal Disassembly of Hierarchical DNAzyme Nanogel for High-Performance Intracellular microRNA Imaging

Rolling circle amplification (RCA) enables the facile construction of compact and versatile DNA nanoassemblies which are yet rarely explored for intracellular analysis. This is might be ascribed to the uncontrollable and inefficient probe integration/activation. Herein, by encoding with tandem allosteric deoxyribozyme (DNA-cleaving DNAzyme), a multifunctional RCA nanogel was established for realizing the efficient intracellular microRNA imaging via the successive activation of the RCA-disassembly module and signal amplification module. The endogenous microRNA stimulates the precise degradation of DNA nanocarriers, thus leading to the efficient exposure of RCA-entrapped DNAzyme biocatalyst for an amplified readout signal. Our bioorthogonal DNAzyme disassembly strategy achieved the robust analysis of intracellular biomolecules, thus showing more prospects in clinical diagnosis.

Genetically encodable tagging and sensing systems for fluorescent RNA imaging

Live cell imaging of RNAs is crucial to interrogate their fundamental roles in various biological processes. The highly spatiotemporal dynamic nature of RNA abundance and localization has presented great challenges for RNA imaging. Genetically encodable tagging and sensing (GETS) systems that can be continuously produced in living systems have afforded promising tools for imaging and sensing RNA dynamics in live cells. Here we review the recent advances of GETS systems that have been developed for RNA tagging and sensing in live cells. We first describe the various GETS systems using MS2-bacteriophage-MS2 coat protein, pumilio homology domain and clustered regularly interspaced short palindromic repeats (CRISPR)-Cas9/13 for RNA labeling and tracking. The progresses of GETS systems for fluorogenic labeling and/or sensing RNAs by engineering light-up RNA aptamers, CRISPR-Cas9 systems and RNA aptamer stabilized fluorogenic proteins are then elaborated. The challenges and future perspectives in this field are finally discussed. With the continuing development, GETS systems will afford powerful tools to elucidate RNA biology in living systems.

An allosteric DNA switch-mediated catalytic DNA circuit for ratiometric and sensitive nucleic acid detection

Herein, a new allosteric DNA switch-mediated catalytic DNA circuit reaction strategy has been proposed for ratiometric and sensitive nucleic acid detection. The sensing system was based on two DNA hybrid probes, each of which was constructed by annealing a reconfigurable DNA hairpin with single-stranded DNA. Upon target recognition by the first DNA hybrid probe, a reconfigurable DNA switch was liberated, triggering a toehold-mediated strand displacement reaction (TSDR) with the second DNA hybrid probe, which was accompanied by the release of another reconfigurable DNA switch. This released allosteric DNA switch could further interact with the first hybrid DNA probe via the TSDR strategy to form a reciprocal strand displacement network between the two DNA hybrid probes. Theoretically, this reciprocal strand displacement reaction would continue till the complete consumption of the reaction substrates. Thus, it provides a new signal amplification method leading toward target recognition. More interestingly, it creates a ratiometric signal response mode for target recognition, which involves the fluorescence increment of one fluorophore (Cy5) and concurrent decrement of another fluorophore (Cy3) accompanied by the target-triggered reciprocal strand displacement reaction. This process could achieve a low detection limit of about 0.1 pM toward the target nucleic acid and selective discrimination toward different mismatched targets. It could also be applied for detection in a serum sample. Thus, the developed catalytic DNA circuit reaction strategy together with ratiometric signal readout provides a new avenue for programmable, reliable and sensitive detection of nucleic acids and might also pave the way for developing more advanced DNA circuits or biosensors.

Cruciate DNA probes for amplified multiplexed imaging of microRNAs in living cells

The real-time imaging of low-abundance tumor-related microRNAs (miRNAs) in living cells holds great potential for early clinical diagnosis of cancers. However, the relatively low detection sensitivity and possible false-positive signals of a probe in complex cellular matrices remain critical challenges for accurate RNA detection. Herein, we developed a novel aptamer-functionalized cruciate DNA probe that enabled amplified multiple miRNA imaging in living cells via catalytic hairpin assembly (CHA). The cross-shaped design of the cruciate DNA probe improved the stability against nucleases and acted as a modular scaffold for CHA circuits for efficient delivery into tumor cells. The cruciate DNA probe allowed self-assembly through thermal annealing and displayed excellent performance for sensitive miRNA detection in vitro. The cruciate DNA probe could be internalized into nucleolin-overexpressed cells specifically via cell-targeting of the AS1411 aptamer, achieving amplified fluorescence imaging and quantitative evaluation of the expression of miRNAs in living cells. Through the simultaneous detection of intracellular multiple miRNAs, the developed cruciate DNA probe could provide more accurate information and reduce the chances of false positive signals for cancer diagnosis. This approach offers a new opportunity for promoting the development of miRNA-related biomedical research and tumor diagnostic applications.

A wheel-like DNA nanosensor with background correction for analysis of miRNA-21 in living cells

A silica ring-based ratiometric fluorescence nanosensing and imaging platform was established for the quantification of miRNA-21 with carbon dots and nucleic-functionalized gold nanoparticles inside and outside the ring, respectively. In the presence of miRNA-21, on one hand, the fluorescence emission signal of the originally quenched 6-carboxyfluorescein (FAM), which was labeled on the nucleic acid molecules that modified on the gold nanoparticles, was re-emitted. On the other hand, the fluorescence intensity of the carbon dots inside the ring remained essentially unchanged, which served to eliminate background interference. The ring rather than the shell well maintained the fluorescence of the carbon dots. The ratio of the recovered fluorescence intensity of FAM to the fluorescence intensity of the carbon dots was linearly correlated with the logarithm of miRNA-21 concentration. The linear range of the probe for miRNA detection was more than 3 orders of magnitude, and the detection limit was as low as 2.5 aM. The feasibility of the method for clinical application was verified by the quantitative analysis of intracellular miRNA.

CRISPR-Cas13a cascade-based viral RNA assay for detecting SARS-CoV-2 and its mutations in clinical samples

SARS-CoV-2 is one of the greatest threats to global human health. Point-of-care diagnostic tools for SARS-CoV-2 could facilitate rapid therapeutic intervention and mitigate transmission. In this work, we report CRISPR-Cas13a cascade-based viral RNA (Cas13C) assay for label-free and isothermal determination of SARS-CoV-2 and its mutations in clinical samples. Cas13a/crRNA was utilized to directly recognize the target of SARS-CoV-2 RNA, and the recognition events sequentially initiate the transcription amplification to produce light-up RNA aptamers for output fluorescence signal. The recognition of viral RNA via Cas13a-guide RNA ensures a high specificity to distinguish SARS-CoV-2 from MERS-CoV and SARS-CoV, as well as viral mutations. A post transcription amplification strategy was triggered after CRISPR-Cas13a recognition contributes to an amplification cascade that achieves high sensitivity for detecting SARS-CoV-2 RNA, with a limit of detection of 0.216 fM. In addition, the Cas13C assay could be able to discriminate single-nucleotide mutation, which was proven with N501Y in SARS-Cov-2 variant. This method was validated by a 100% agreement with RT-qPCR results from 12 clinical throat swab specimens. The Cas13C assay has the potential to be used as a routine nucleic acid test of SARS-CoV-2 virus in resource-limited regions.

Hairpin-inserted cross-shaped DNA nanoprobe for ultrasensitive microRNA detection based on built-in target analogue cycle amplification

It remains technically challenging to develop a sensitive assay system to isothermally amplify the signal for miRNA detection because of its low abundance in tested sample, sequence similarities and existence in complex biological environments. In this study, using miRNA-21 as target model, a hairpin-inserted cross-shaped DNA nanoprobe (CP) with four functional arms is constructed for the ultrasensitive detection of miRNA via one-step built-in target analogue (BTA) cycle-mediated signal amplification. BTA is pre-locked in one arm of CP probe and inactive. In the presence of target miRNA, BTA can be unlocked and initiate an isothermal amplification process. Utilizing as-designed CP probe, miRNA-21 can be detected to down to 500 fM, and the linear response range spans over five orders of magnitude. The nonspecific signal is less than 1% upon nontarget miRNAs. CP probe exhibits ∼six times enhancement in resistance to nuclease degradation and no obvious degradation-induced fluorescence change is detected during the assay period. The recovery yield ranges from 98.2～105.5% in FBS solution. Because of the high sensitivity, desirable specificity, strong anti-interference ability and substantial increase in nuclease resistance, CP probe is a promising tool for the detection of miRNAs in a complex biological milieu.

Potentially tunable ratiometric electrochemiluminescence sensing based on conjugated polymer nanoparticle for organophosphorus pesticides detection

In general, suitable double luminophores and their coreactants are necessary for constructing electrochemiluminescence (ECL) ratio strategy. However, the complexity of matching double luminophores and the stability and repeatability problem suffered by introducing exogenous coreactant would greatly limit the application of ratio detection. An original single-luminophore-based ECL ratio sensing was developed excluding any exogenous coreactants in this work. The poly [9,9-bis(3'-(N,N-dimethylamino)propyl)- 2,7-fluorene]-alt-2,7-(9,9-dioctylfluorene)] nanoparticles (PFN NPs) were explored to emit two anodic ECL signals. One centered at + 1.25 V (ECL-1) with the scanning potential of 0 ~ + 1.25 V and the other at + 1.95 V (ECL-2) with the scanning potential of 0 ~ + 1.95 V. ECL-1 showed a very strong emission without any exogenous coreactant. Importantly, hydrogen peroxide (H₂O₂) was able to efficiently weaken ECL-1 but strengthen ECL-2. When organophosphorus pesticides (OPs) were absent, the immobilized acetylcholinesterase-choline oxidase (AChE-ChOx) would catalyze the substrate acetylthiocholine chloride (ATCl) to produce H₂O₂, resulting in a quenched ECL-1 and an enhanced ECL-2. With the introduction of OPs, ECL-1 increased while ECL-2 accordingly decreased as OPs prohibited production of H₂O₂ by inhibiting activity of AChE. Highly sensitive ECL ratio detection for OPs was realized based on the change of the ratio of two signals. The dual anode emission properties of PFN NPs coupled with the opposite regulation of H₂O₂ on the two signals paved a new avenue for potentially tunable ECL ratio sensing strategy, and showed enormous potential applications for OPs analysis.

Insights on gastrointestinal motility through the use of optogenetic sensors and actuators

The muscularis of the gastrointestinal (GI) tract consists of smooth muscle cells (SMCs) and various populations of interstitial cells of Cajal (ICC), platelet-derived growth factor receptor α⁺ (PDGFRα⁺ ) cells, as well as excitatory and inhibitory enteric motor nerves. SMCs, ICC and PDGFRα⁺ cells form an electrically coupled syncytium, which together with inputs from the enteric nervous system (ENS) regulate GI motility. Early studies evaluating Ca²⁺ signalling behaviours in the GI tract relied upon indiscriminate loading of tissues with Ca²⁺ dyes. These methods lacked the means to study activity in specific cells of interest without encountering contamination from other cells within the preparation. Development of mice expressing optogenetic sensors (GCaMP, RCaMP) has allowed visualization of Ca²⁺ signalling behaviours in a cell specific manner. Additionally, availability of mice expressing optogenetic modulators (channelrhodopsins or halorhodospins) has allowed manipulation of specific signalling pathways using light. GCaMP expressing animals have been used to characterize Ca²⁺ signalling behaviours of distinct classes of ICC and SMCs throughout the GI musculature. These findings illustrate how Ca²⁺ signalling in ICC is fundamental in GI muscles, contributing to tone in sphincters, pacemaker activity in rhythmic muscles and relaying enteric signals to SMCs. Animals that express channelrhodopsin in specific neuronal populations have been used to map neural circuitry and to examine post junctional neural effects on GI motility. Thus, optogenetic approaches provide a novel means to examine the contribution of specific cell types to the regulation of motility patterns within complex multi-cellular systems. Abstract Figure Legends Optogenetic activators and sensors can be used to investigate the complex multi-cellular nature of the gastrointestinal (GI tract). Optogenetic activators that are activated by light such as channelrhodopsins (ChR2), OptoXR and halorhodopsinss (HR) proteins can be genetically encoded into specific cell types. This can be used to directly activate or silence specific GI cells such as various classes of enteric neurons, smooth muscle cells (SMC) or interstitial cells, such as interstitial cells of Cajal (ICC). Optogenetic sensors that are activated by different wavelengths of light such as green calmodulin fusion protein (GCaMP) and red CaMP (RCaMP) make high resolution of sub-cellular Ca²⁺ signalling possible within intact tissues of specific cell types. These tools can provide unparalleled insight into mechanisms underlying GI motility and innervation. This article is protected by copyright. All rights reserved.

Fluorogenic RNA-Based Biosensor to Sense the Glycolytic Flux in Mammalian Cells

The visualization of metabolic flux in real time requires sensor molecules that transduce variations of metabolite concentrations into an appropriate output signal. In this regard, fluorogenic RNA-based biosensors are promising molecular tools as they fluoresce only upon binding to another molecule. However, to date no such sensor is available that enables the direct observation of key metabolites in mammalian cells. Toward this direction, we selected and characterized an RNA light-up sensor designed to respond to fructose 1,6-bisphosphate and applied it to probe glycolytic flux variation in mammal cells.

Inert Pepper aptamer-mediated endogenous mRNA recognition and imaging in living cells

The development of RNA aptamers/fluorophores system is highly desirable for understanding the dynamic molecular biology of RNAs in vivo. Peppers-based imaging systems have been reported and applied for mRNA imaging in living cells. However, the need to insert corresponding RNA aptamer sequences into target RNAs and relatively low fluorescence signal limit its application in endogenous mRNA imaging. Herein, we remolded the original Pepper aptamer and developed a tandem array of inert Pepper (iPepper) fluorescence turn-on system. iPepper allows for efficient and selective imaging of diverse endogenous mRNA species in live cells with minimal agitation of the target mRNAs. We believe iPepper would significantly expand the applications of the aptamer/fluorophore system in endogenous mRNA imaging, and it has the potential to become a powerful tool for real-time studies in living cells and biological processing.

Fluorescence DNA Switch for Highly Sensitive Detection of miRNA Amplified by Duplex-Specific Nuclease

DNA is a type of promising material for the construction of sensors owing to its sequence programmability to control the formation of certain structures. MicroRNA (miRNA) can be applied as promising biomarkers for the diagnosis of a range of diseases. Herein, a novel fluorescent sensing strategy for miRNA is proposed combining duplex-specific nuclease (DSN)-mediated amplification and dumbbell DNA structural switch. Gold nanoparticles (AuNPs) are employed, which provide a 3D reaction interface. They also act as effective fluorescence quenchers. The proposed sensor exhibits high sensitivity (sub-femtomolar level) with a wide dynamic range. In addition, excellent selectivity to distinguish homology sequences is achieved. It also performs satisfactorily in biological samples. Overall, this fluorescent sensor provides a powerful tool for the analysis of miRNA levels and can be applied for related biological studies and clinical diagnosis.

Aptamer based probes for living cell intracellular molecules detection

Biosensors have been employed for monitoring and imaging biological events and molecules. Sensitive detection of different biomolecules in vivo can reflect the changes of physiological conditions in real-time, which is of great significance for the diagnosis and treatment of diseases. The detection of intracellular molecules concentration change can indicate the occurrence and development of disease. But the analysis process of the existing detection methods, such as Western blot detection of intracellular protein, polymerase chain reaction (PCR) technique quantitative analysis of intracellular RNA and DNA, usually need to extract the cell lysis which is complex and time-consuming. Fluorescence bioimaging enables in situ monitoring of intracellular molecules in living cells. By combining the specificity of aptamer for intracellular molecules binding, and biocompatibility of fluorescent materials and nanomaterials, biosensors with different nanostructures have been developed to enter into living cells for analysis. This review summarizes the fluorescence detection methods based on aptamer for intracellular molecules detection. The principles, limit of detection, advantages, and disadvantages of different platforms for intracellular molecular fluorescent response are summarized and reviewed. Finally, the current challenges and future developments were discussed and proposed.

Shedding Light on DNA-Based Nanoprobes for Live-Cell MicroRNA Imaging

DNA-based nanoprobes integrated with various imaging signals have been employed for fabricating versatile biosensor platforms for the study of intracellular biological process and biomarker detection. The nanoprobes developments also provide opportunities for endogenous microRNA (miRNA) in situ analysis. In this review, the authors are primarily interested in various DNA-based nanoprobes for miRNA biosensors and declare strategies to reveal how to customize the desired nanoplatforms. Initially, various delivery vehicles for nanoprobe architectures transmembrane transport are delineated, and their biosecurity and ability for resisting the complex cellular environment are evaluated. Then, the novel strategies for designing DNA sequences as target miRNA specific recognition and signal amplification modules for miRNA detection are presented. Afterward, recent advances in imaging technologies to accurately respond and produce significant signal output are summarized. Finally, the challenges and future directions in the field are discussed.

Nonenzymatic Autonomous Assembly of Cross-Linked Network Structures from Only Two Palindromic DNA Components for Intracellular Fluorescence Imaging of miRNAs

The abnormal expression of miRNA-21 is often found in tumor specimens and cell lines, and thus, its specific detection is an urgent need for the diagnosis and effective therapy of cancers. In this contribution, we demonstrate a palindrome-based hybridization chain reaction (PHCR) upon the stimuli of a short oligonucleotide trigger to perform the autonomous assembly of cross-linked network structures (CNSs) for the amplification detection of miRNA-21 and sensitive fluorescence imaging of cancerous cells. The building blocks are only two palindromic hairpin-type DNA strands that are separately modified with different fluorophores (Cy3 and Cy5), which is easily combined with the catalytic hairpin assembly (CHA) technique that can further amplify the signal output. Utilizing the CHA-PHCR assay system, a small amount of miRNA-21 can activate many triggers via CHA and in turn induce the PHCR-based CNS assembly from more DNA building blocks, bringing Cy3 and Cy5 into close proximity to each other and generating ultrasensitive fluorescence resonance energy transfer signals. As a result, target miRNA can be quantitatively detected down to as low as 10 pM with high assay specificity. The coexisting nontarget miRNAs and other biomacromolecules do not interfere with signal transduction. The developed assay system is suitable for screening different expression levels of miRNA-21 in living cells by fluorescence imaging. The palindrome-based cross-linking assembly can enhance the intracellular stability of assembled nanostructures by at least fivefold and exhibit the good universality for the detection of other miRNAs. Moreover, cancerous cells can be distinguished from healthy cells, and the CHA-PHCR assay is in good accordance with the gold standard PCR method, indicating a promising platform for the diagnosis of human cancers and other genetic diseases.

DNA-Templated Bioorthogonal Reactions via Catalytic Hairpin Assembly for Precise RNA Imaging in Live Cells

There has been a significant interest in developing proximity-induced bioorthogonal reactions for nucleic acid detection and imaging, owing to their high specificity and tunable reaction kinetics. Herein, we reported the first design of a fluorogenic sensor by coupling a bioorthogonal reaction with a DNA cascade circuit for precise RNA imaging in live cells. Two DNA hairpin probes bearing tetrazines or vinyl ether caged fluorophores were designed and synthesized. Upon target mRNA triggering catalytic hairpin assembly, the chemical reaction partners were brought in a spatial proximity to yield high effective concentrations, which dramatically facilitated the bioorthogonal reaction efficiency to unmask the vinyl ether group to activate fluorescence. The proposed fluorogenic sensor was demonstrated to have a high signal-to-noise ratio up to ∼30 fold and enabled the sensitive detection of target mRNA with a detection limit of 4.6 pM. Importantly, the fluorogenic sensor presented low background signals in biological environments due to the unique "click to release" feature, avoiding false positive results caused by unspecific degradation. We also showed that the fluorogenic sensor could accurately image mRNA in live cells and distinguish the relative mRNA expression levels in both tumor and normal cells. Benefiting from these significant advantages, our method provides a useful tool for basic studies of bioorthogonal chemistry and early clinical diagnosis.

Tumor-targeting [2]catenane-based grid-patterned periodic DNA monolayer array for in vivo theranostic application

DNA nanotechnology is often used to build various nano-structures for signaling and/or drug delivery, but it essentially suffers from several major limitations, such as a large number of DNA strands and limited targeting ligands. Moreover, there is no report on in vivo two-dimensional DNA arrays because of various technical challenges. By cross-catenating two palindromic DNA rings, herein, we demonstrate a catenane-based grid-patterned periodic DNA monolayer array ([2]GDA) capable of preferentially accumulating in tumor tissues without any targeting ligands, with a thickness equal to the double-helical DNA monolayer (nearly 2 nm). The structural flexibility of [2]GDA enabled it to fold into a spherical object in solution, favoring cellular uptake. Thus, its cellular internalization activity was comparable with that of the commercial lipofectamine 3000. Moreover, [2]GDA retained the structural integrity over 24 h incubation in biological solutions, achieving a 360-fold improvement in in vivo stability. Significantly, anticancer drug-loaded [2]GDA exhibits desirable therapeutic efficacy in tumor-bearing animals without detectable side effects.

Ratiometric FRET Encoded Hierarchical ZrMOF @ Au Cluster for Ultrasensitive Quantifying MicroRNA In Vivo

Here, Zirconium metal-organic frameworks @ gold (ZrMOF @ Au) cluster architectures have been fabricated and then functionalized with two fluorescent dyes (Quasar [QS] and Cyanine5.5 [Cy5.5]) through deoxyribonucleic acid hybridization, to form a fluorescence resonance energy transfer (FRET) encoded ZrMOF  @  Au-QS/Cy5.5 complex. In the presence of the target intracellular microRNA (miR)-21, the fluorescence of Cy5.5 at 705 nm (F₇₀₅ ) decreases and the fluorescence of QS at 665 nm (F₆₆₅ ) increases when Cy5.5 is released from the surface of ZrMOF  @  Au-QS/Cy5.5. The change in the fluorescence ratio (F₇₀₅ /F₆₆₅ ) shows an outstanding linear range of 0.006-67.9 amol/ng_RNA , and the limit of detection is 4.51 zmol/ng_RNA in living cells. The high ratio loading of nucleic acid on surface of ZrMOF @ Au cluster and two fluorescence encoded signal enables better sensitivity and reliability. Zeptomolar sensitivity and good linearity against target affords distinct imaging-based monitoring of the cancer marker miR-21 both in living cells and in vivo. At the same time, the architecture displays remarkable photothermal conversion efficiency (53.7%) and gives rise to outstanding therapy ability in vivo. This strategy offers new avenues for the intelligent quantification of miRNAs for simultaneous diagnoses and treatments of early-stage cancers.

Live-cell imaging of microRNA expression with post-transcriptional feedback control

MicroRNAs (miRNAs) are small noncoding RNAs that regulate complex gene expression networks in eukaryotic cells. Because of their unique expression patterns, miRNAs are potential molecular markers for specific cell states. Although a system capable of imaging miRNA in living cells is needed to visually detect miRNA expression, very few fluorescence signal-on sensors that respond to expression of target miRNA (miR-ON sensors) are available. Here we report an miR-ON sensor containing a bidirectional promoter-driven Csy4 endoribonuclease and green fluorescent protein, ZsGreen1, for live-cell imaging of miRNAs with post-transcriptional feedback control. Csy4-assisted miR-ON (Csy4-miR-ON) sensors generate negligible background but respond sensitively to target miRNAs, allowing high-contrast fluorescence detection of miRNAs in various human cells. We show that Csy4-miR-ON sensors enabled imaging of various miRNAs, including miR-21, miR-302a, and miR-133, in vitro as well as in vivo. This robust tool can be used to evaluate miRNA expression in diverse biological and medical applications.

MoS2-based nanocomposites for cancer diagnosis and therapy

Molybdenum is a trace dietary element necessary for the survival of humans. Some molybdenum-bearing enzymes are involved in key metabolic activities in the human body (such as xanthine oxidase, aldehyde oxidase and sulfite oxidase). Many molybdenum-based compounds have been widely used in biomedical research. Especially, MoS2-nanomaterials have attracted more attention in cancer diagnosis and treatment recently because of their unique physical and chemical properties. MoS2 can adsorb various biomolecules and drug molecules via covalent or non-covalent interactions because it is easy to modify and possess a high specific surface area, improving its tumor targeting and colloidal stability, as well as accuracy and sensitivity for detecting specific biomarkers. At the same time, in the near-infrared (NIR) window, MoS2 has excellent optical absorption and prominent photothermal conversion efficiency, which can achieve NIR-based phototherapy and NIR-responsive controlled drug-release. Significantly, the modified MoS2-nanocomposite can specifically respond to the tumor microenvironment, leading to drug accumulation in the tumor site increased, reducing its side effects on non-cancerous tissues, and improved therapeutic effect. In this review, we introduced the latest developments of MoS2-nanocomposites in cancer diagnosis and therapy, mainly focusing on biosensors, bioimaging, chemotherapy, phototherapy, microwave hyperthermia, and combination therapy. Furthermore, we also discuss the current challenges and prospects of MoS2-nanocomposites in cancer treatment.

Novel optoelectronic metal organic framework material perylene tetracarboxylate magnesium: preparation and biosensing

The pursuit for improving photoelectrochemical (PEC) performances of organic materials remains an urgent need. Here, we have proposed an envision of the preparation the metal-organic frameworks (MOFs) with arenes to realize high photo-to-current conversion efficiency and excellent PEC performances. Magnesium 3,4,9,10-perylene tetracarboxylic acid metal-organic frameworks (Mg-PTCA MOFs) were synthesized for the first time. The uniformly distributed and regular-shaped Mg-PTCA MOFs showed a much more stable and higher photocurrent than the single PTCA and its derivatives, which confirmed our hypothesis. A regenerated-biosensor was designed for microRNA analysis based on Mg-PTCA MOFs as a novel photoelectric material, target-triggered three-dimensional DNA Scaffold (3D-Sca) as an efficient signal amplifier, and gold nanoclusters (Au NCs) as quencher. The elaborately designed biosensor achieved ultrasensitive detection for miRNA 21 with a dynamic range from 10 aM to 10 pM and a detection limit of 2.8 aM. This biosensor showed good analytical performance in the extracts of different cancer cells, indicating the possibility for early diagnosis, timely staging assessment, and accurate prognostic judgment for diseases. The recommendable performances of Mg-PTCA MOFs highlight the significance of organic MOFs in PEC sensing.