Asymmetric Radical Bicyclization of Allyl Azidoformates via Cobalt(II)-Based Metalloradical Catalysis

Dynamic stereomutation of vinylcyclopropanes with metalloradicals

The ever increasing demands for greater sustainability and lower energy usage in chemical processes call for fundamentally new approaches and reactivity principles. In this context, the pronounced prevalence of odd-oxidation states in less precious metals bears untapped potential for fundamentally distinct reactivity modes via metalloradical catalysis1-3. Contrary to the well-established reactivity paradigm that organic free radicals, upon addition to a vinylcyclopropane, lead to rapid ring opening under strain release-a transformation that serves widely as a mechanistic probe (radical clock)4 for the intermediacy of radicals5-we herein show that a metal-based radical, that is, a Ni(I) metalloradical, triggers reversible cis/trans isomerization instead of opening. The isomerization proceeds under chiral inversion and, depending on the substitution pattern, occurs at room temperature in less than 5 min, requiring solely the addition of the non-precious catalyst. Our combined computational and experimental mechanistic studies support metalloradical catalysis as origin of this profound reactivity, rationalize the observed stereoinversion and reveal key reactivity features of the process, including its reversibility. These insights enabled the iterative thermodynamic enrichment of enantiopure cis/trans mixtures towards a single diastereomer through multiple Ni(I) catalysis rounds and also extensions to divinylcyclopropanes, which constitute strategic motifs in natural product- and total syntheses6. While the trans-isomer usually requires heating at approximately 200 °C to trigger thermal isomerization under racemization to cis-divinylcyclopropane, which then undergoes facile Cope-type rearrangement, the analogous contra-thermodynamic process is herein shown to proceed under Ni(I) metalloradical catalysis under mild conditions without any loss of stereochemical integrity, enabling a mild and stereochemically pure access to seven-membered rings, fused ring systems and spirocycles.

Organo-Photocatalytic Anti-Markovnikov Hydroamidation of Alkenes with Sulfonyl Azides: A Combined Experimental and Computational Study

The construction of C(sp3)-N bonds via direct N-centered radical addition with olefins under benign conditions is a desirable but challenging strategy. Herein, we describe an organo-photocatalytic approach to achieve anti-Markovnikov alkene hydroamidation with sulfonyl azides in a highly efficient manner under transition-metal-free and mild conditions. A broad range of substrates, including both activated and unactivated alkenes, are suitable for this protocol, providing a convenient and practical method to construct sulfonylamide derivatives. A synergistic experimental and computational mechanistic study suggests that the additive, Hantzsch ester (HE), might undergo a triplet-triplet energy transfer manner to achieve photosensitization by the organo-photocatalyst under visible light irradiation. Next, the resulted triplet excited state 3HE* could lead to a homolytic cleavage of C4-H bond, which triggers a straightforward H-atom transfer (HAT) style in converting sulfonyl azide to the corresponding key amidyl radical. Subsequently, the addition of the amidyl radical to alkene followed by HAT from p-toluenethiol could proceed to afford the desired anti-Markovnikov hydroamidation product. It is worth noting that mechanistic pathway bifurcation could be possible for this reaction. A feasible radical chain propagation mechanistic pathway is also proposed to rationalize the high efficiency of this reaction.

Boryl Radical as a Catalyst in Enabling Intra- and Intermolecular Cascade Radical Cyclization Reactions: Construction of Polycyclic Molecules

Cascade radical cyclization constitutes an atom- and step-economic route for rapid assembly of polycyclic molecular skeletons. Although an array of redox-active metal catalysts has recently shown robust applications in enabling various catalytic cascade radical processes, the use of free organic radical as the catalyst, which is capable of triggering strategically distinct cascades, has rarely been developed. Here, we disclosed that the benzimidazolium-based N-heterocyclic carbene (NHC)-boryl radical is capable of catalyzing cascade cyclization reactions in both intra- and intermolecular pathways, assembling [5,5] fused bicyclic and [6,6,6] fused tricyclic molecules, respectively. The catalytic reactions start with the chemo- and regioselective addition of the boryl radical catalyst to a tethered alkene or alkyne moiety, followed by either an intramolecular formal [3+2] or an intermolecular [2+2+2] cycloaddition process to construct bicyclo[3.3.0]octane or tetrahydrophenanthridine skeletons, respectively. Eventually, a β-elimination occurs to release the boryl radical catalyst, completing a catalytic cycle. High to excellent diastereoselectivity is achieved in both catalytic reactions under substrate control.

Iron(II) Phthalocyanine-Catalyzed Homodimerization and Tandem Diamination of Diazo Compounds with Primary Amines: Access to Construct Substituted 2,3-Diaminosuccinonitriles in One-Pot

We herein first report the homodimerization and tandem diamination of diazo compounds with primary amines catalyzed by the iron(II) phthalocyanine (PcFe(II)), which can construct one C-C bond and two C-N bonds within 20 min in one-pot. Compared to the traditional metal-catalyzed N-H insertion reaction between amines with diazo reagents, the developed reaction almost does not generate the N-H insertion product, but the homodimerization/tandem diamination product. The proposed mechanism studies indicate that primary amines play a crucial role in the homocoupling of diazo compounds via dimerization of iron(III)-acetonitrile radical generated from the reaction between diazoacetonitrile with PcFe(II) coordinated by bis(amines); the β-hydride elimination is involved, and then, the attack of primary amines toward the carbon atoms on the formed C-C bond is followed. Moreover, this novel reaction can be used to effectively prepare substituted 2,3-diaminosuccinonitriles with high yields and even up to >99:1 d.r., encouragingly these products contain both 1,2-diamines and succinonitrile motifs, which are two classes of important organic compounds with significant applications in many yields. This reaction is also suitable for the gram-scale preparation of 2,3-bis(phenylamino)succinonitrile (2a) with a yield of 84%. Therefore, the developed reaction represents a new type of transformation.

Metalloradical Catalysis: General Approach for Controlling Reactivity and Selectivity of Homolytic Radical Reactions

Since Friedrich Wöhler's groundbreaking synthesis of urea in 1828, organic synthesis over the past two centuries has predominantly relied on the exploration and utilization of chemical reactions rooted in two-electron heterolytic ionic chemistry. While one-electron homolytic radical chemistry is both rich in fundamental reactivities and attractive with practical advantages, the synthetic application of radical reactions has been long hampered by the formidable challenges associated with the control over reactivity and selectivity of high-energy radical intermediates. To fully harness the untapped potential of radical chemistry for organic synthesis, there is a pressing need to formulate radically different concepts and broadly applicable strategies to address these outstanding issues. In pursuit of this objective, researchers have been actively developing metalloradical catalysis (MRC) as a comprehensive framework to guide the design of general approaches for controlling over reactivity and stereoselectivity of homolytic radical reactions. Essentially, MRC exploits the metal-centered radicals present in open-shell metal complexes as one-electron catalysts for homolytic activation of substrates to generate metal-entangled organic radicals as the key intermediates to govern the reaction pathway and stereochemical course of subsequent catalytic radical processes. Different from the conventional two-electron catalysis by transition metal complexes, MRC operates through one-electron chemistry utilizing stepwise radical mechanisms.

A Comparative Study of Cationic Copper(I) Reagents Supported by Bipodal Tetramethylguanidinyl-Containing Ligands as Nitrene-Transfer Catalysts

The bipodal compounds [(TMG2biphenN-R)CuI-NCMe](PF6) (R = Me, Ar (4-CF3Ph-)) and [(TMG2biphenN-Me)CuI-I] have been synthesized with ligands that feature a diarylmethyl- and triaryl-amine framework and superbasic tetramethylguanidinyl residues (TMG). The cationic Cu(I) sites mediate catalytic nitrene-transfer reactions between the imidoiodinane PhI = NTs (Ts = tosyl) and a panel of styrenes in MeCN, to afford aziridines, demonstrating comparable reactivity profiles. The copper reagents have been further explored to execute C-H amination reactions with a variety of aliphatic and aromatic hydrocarbons and two distinct nitrene sources PhI = NTs and PhI = NTces (Tces = 2,2,2-trichloroethylsulfamate) in benzene/HFIP (10:2 v/v). Good yields have been obtained for sec-benzylic and tert-C-H bonds of various substrates, especially with the more electron-deficient catalyst [(TMG2biphenN-Ar)CuI-NCMe](PF6). In conjunction with earlier studies, the order of reactivity of these bipodal cationic reagents as a function of the metal employed is established as Cu > Fe > Co ≥ Mn. However, as opposed to the base-metal analogues, the bipodal Cu reagents are less reactive than a similar tripodal Cu catalyst. The observed fluorophilicity of the bipodal Cu compounds may provide a deactivation pathway.

Chiral Cpx Rhodium(III)-Catalyzed Enantioselective Aziridination of Unactivated Terminal Alkenes

Chiral cyclopentadienyl-rhodium(III) Cpx Rh(III) catalysis has been demonstrated to be competent for catalyzing highly enantioselective aziridination of challenging unactivated terminal alkenes and nitrene sources. The chiral Cpx Rh(III) catalysis system exhibited outstanding catalytic performance and wide functional group tolerance, yielding synthetically important and highly valuable chiral aziridines with good to excellent yields and enantioselectivities (up to 99 % yield, 93 % ee). This protocol presents a novel and effective strategy for synthesizing enantioenriched aziridines from simple alkenes. Various transformations were performed on the aziridine products, illustrating the versatility and synthetic potential of this protocol for constructing highly functionalized compounds.

Alkene Hydrobenzylation by a Single Catalyst That Mediates Iterative Outer-Sphere Steps

Cross-coupling catalysts typically react and unite functionally distinct partners via sequential inner-sphere elementary steps: coordination, migratory insertion, reductive elimination, etc. Here, we report a single catalyst that cross-couples styrenes and benzyl bromides via iterative outer-sphere steps: metal-ligand-carbon interactions. Each partner forms a stabilized radical intermediate, yet heterocoupled products predominate. The system is redox-neutral and, thus, avoids exogenous oxidants, resulting in simple and scalable conditions. Numerous variations of alkene hydrobenzylation are made possible, including access to the privileged heterodibenzyl (1,2-diarylethane) motif and challenging quaternary carbon variants.

New Mode of Asymmetric Induction for Enantioselective Radical N-Heterobicyclization via Kinetically Stable Chiral Radical Center

Enantioselective radical N-heterobicyclization of N-allylsulfamoyl azides have been developed via metalloradical catalysis (MRC). The Co(II)-based catalytic system can homolytically activate the organic azides with varied electronic and steric properties for asymmetric radical N-heterobicyclization under mild conditions without the need of oxidants, allowing for stereoselective construction of chiral [3.1.0]-bicyclic sulfamoyl aziridines in excellent yields with high diastereoselectivities and enantioselectivities. The key to achieving the enantioselective radical process relies on catalyst development through ligand design. We demonstrate that the use of new-generation D2-symmetric chiral bridged amidoporphyrin ligand HuPhyrin with judicious variation of the alkyl bridge length can dictate both reactivity and selectivity of Co(II)-based MRC. We present both experimental and computational studies that shed light on the working details of the unprecedented mode of asymmetric induction consisting of enantioface-selective radical addition and stereospecific radical substitution. We showcase the synthetic applications of the resulting enantioenriched bicyclic aziridines through a number of stereospecific transformations.

Solvent Effects on the Chemo- and Site-Selectivity of Transition Metal-Catalyzed Nitrene Transfer Reactions: Alternatives to Chlorinated Solvents

Transition metal-catalyzed, non-enzymatic nitrene transfer (NT) reactions to selectively transform C-H and C=C bonds to new C-N bonds are a powerful strategy to streamline the preparation of valuable amine building blocks. However, many catalysts for these reactions use environmentally unfriendly solvents that include dichloromethane, chloroform, 1,2-dichloroethane and benzene. We developed a high-throughput experimentation (HTE) protocol for heterogeneous NT reaction mixtures to enable rapid screening of a broad range of solvents for this chemistry. Coupled with the American Chemical Society Pharmaceutical Roundtable (ACSPR) solvent tool, we identified several attractive replacements for chlorinated solvents. Selected catalysts for NT were compared and contrasted using our HTE protocol, including silver supported by N-dentate ligands, dinuclear Rh complexes and Fe/Mn phthalocyanine catalysts.

Ligand-Enabled Carboamidation of Unactivated Alkenes through Enhanced Organonickel Electrophilicity

Catalytic carboamination of alkenes is a powerful synthetic tool to access valuable amine scaffolds from abundant and readily available alkenes. Although a number of synthetic approaches have been developed to achieve the rapid buildup of molecular complexity in this realm, the installation of diverse carbon and nitrogen functionalities onto unactivated alkenes remains underdeveloped. Here we present a ligand design approach to enable nickel-catalyzed three-component carboamidation that is applicable to a wide range of alkenyl amine derivatives via a tandem process involving alkyl migratory insertion and inner-sphere metal-nitrenoid transfer. With this method, various nitrogen functionalities can be installed into both internal and terminal unactivated alkenes, leading to differentially substituted diamines that would otherwise be difficult to access. Mechanistic investigations reveal that the tailored Ni(cod)(BQiPr) precatalyst modulates the electronic properties of the presumed π-alkene-nickel intermediate via the quinone ligand, leading to enhanced carbonickelation efficiency across the unactivated C═C bond. These findings establish nickel's ability to catalyze multicomponent carboamidation with a high efficiency and exquisite selectivity.

Catalytic, asymmetric carbon-nitrogen bond formation using metal nitrenoids: from metal-ligand complexes via metalloporphyrins to enzymes

The introduction of nitrogen atoms into small molecules is of fundamental importance and it is vital that ever more efficient and selective methods for achieving this are developed. With this aim, the potential of nitrene chemistry has long been appreciated but its application has been constrained by the extreme reactivity of these labile species. This liability however can be attenuated by complexation with a transition metal and the resulting metal nitrenoids have unique and highly versatile reactivity which includes the amination of certain types of aliphatic C-H bonds as well as reactions with alkenes to afford aziridines. At least one new chiral centre is typically formed in these processes and the development of catalysts to exert control over enantioselectivity in nitrenoid-mediated amination has become a growing area of research, particularly over the past two decades. Compared with some synthetic methods, metal nitrenoid chemistry is notable in that chemists can draw from a diverse array of metals and catalysts , ranging from metal-ligand complexes, bearing a variety of ligand types, via bio-inspired metalloporphyrins, all the way through to, very recently, engineered enzymes themselves. In the latter category in particular, rapid progress is being made, the rate of which suggests that this approach may be instrumental in addressing some of the outstanding challenges in the field. This review covers key developments and strategies that have shaped the field, in addition to the latest advances, up until September 2023.

Nitrene-Mediated Enantioselective Intramolecular Olefin Oxyamination to Access Chiral γ-Aminomethyl-γ-Lactones

Attaching a nitrene precursor to an intramolecular nucleophile allows for a catalytic asymmetric intramolecular oxyamination of alkenes in which the nucleophile adds in an endocyclic position and the amine in an exocyclic fashion. Using chiral-at-ruthenium catalysts, chiral γ-aminomethyl-γ-lactones containing a quaternary carbon in γ-position are provided in high yields (up to 99 %) and with excellent enantioselectivities (up to 99 % ee). DFT calculations support the possibility of both a singlet (concerted oxyamination of the alkene) and triplet pathway (stepwise oxyamination) for the formation of the predominant stereoisomer. γ-Aminomethyl-γ-lactones are versatile chiral building blocks and can be converted to other heterocycles such as δ-lactams, 2-oxazolidinones, and tetrahydrofurans.

Electrochemical flow aziridination of unactivated alkenes

Aziridines derived from bioactive molecules may have unique pharmacological activities, making them useful in pharmacology (e.g. mitomycin C). Furthermore, the substitution of the epoxide moiety in epothilone B with aziridine, an analog of epoxides, yielded a pronounced enhancement in its anticancer efficacy. Thus, there is interest in developing novel synthetic technologies to produce aziridines from bioactive molecules. However, known methods usually require metal catalysts, stoichiometric oxidants and/or pre-functionalized amination reagents, causing difficulty in application. A practical approach without a metal catalyst and extra-oxidant for the aziridination of bioactive molecules is in demand, yet challenging. Herein, we report an electro-oxidative flow protocol that accomplishes an oxidant-free aziridination of natural products. This process is achieved by an oxidative sulfonamide/alkene cross-coupling, in which sulfonamide and alkene undergo simultaneous oxidation or alkene is oxidized preferentially. Further anticancer treatments in cell lines have demonstrated the pharmacological activities of these aziridines, supporting the potential of this method for drug discovery.

Recent Advances in the Enantioselective Radical Reactions

The review covers research published since 2017 and is focused on enantioselective synthesis using radical reactions. It describes recent approaches to the asymmetric synthesis of chiral molecules based on the application of the metal catalysis, dual metal and organocatalysis and finally, pure organocatalysis including enzyme catalysis. This review focuses on the synthetic aspects of the methodology and tries to show which compounds can be obtained in enantiomerically enriched forms.

Synthesis of Optically Active Organofluorides by Ring Opening of Oxazolidinone-Fused Aziridines

A general method for synthesizing optically active, primary, secondary, and tertiary organofluorides was developed. This chiral pool synthesis utilized the skeleton of arabinose to generate diastereomerically pure 2-oxazolidinone-fused aziridines, which underwent ring opening with a fluoride anion. The adducts, polyoxygenated organofluorides, were useful precursors to various fluorinated compounds, such as fluorinated amino acids.

A Counterion/Ligand-Tuned Chemo- and Enantioselective Copper-Catalyzed Intermolecular Radical 1,2-Carboamination of Alkenes

The copper-catalyzed enantioselective intermolecular radical 1,2-carboamination of alkenes with readily accessible alkyl halides is an appealing strategy for producing chiral amine scaffolds. The challenge arises from the easily occurring atom transfer radical addition between alkyl halides and alkenes and the issue of enantiocontrol. We herein describe a radical alkene 1,2-carboamination with sulfoximines in a highly chemo- and enantioselective manner. The key to the success of this process is the conceptual design of a counterion/highly sterically demanded ligand coeffect to promote the ligand exchange of copper(I) with sulfoximines and forge chiral C-N bonds between alkyl radicals and the chiral copper(II) complex. The reaction covers alkenes bearing distinct electronic properties, such as aryl-, heteroaryl-, carbonyl-, and aminocarbonyl-substituted ones, and various radical precursors, including alkyl chlorides, bromides, iodides, and the CF₃ source. Facile transformations deliver many chiral amine building blocks of interest in organic synthesis and related areas.

Rhodium(II)-Catalyzed Enantioselective Intermolecular Aziridination of Alkenes

C₄-Symmetrical dirhodium(II) tetracarboxylates are highly efficient catalysts for the asymmetric intermolecular aziridination of substituted alkenes with sulfamates. The reaction proceeds with high levels of efficiency and chemoselectivity to afford aziridines with excellent yields of up to 95% and enantiomeric excesses of up to 99%. The scope of the alkene aziridination includes mono-, di-, and trisubstituted olefins as well as the late-stage functionalization of complex substrates. The reaction can be performed on a gram-scale with a catalyst loading of 0.1 mol %. Our DFT study led us to propose a two-spin-state mechanism, involving a triplet Rh-nitrene species as key intermediate to drive the stereocontrolled approach and activation of the substrate.

Aziridination Reactivity of a Manganese(II) Complex with a Bulky Chelating Bis(Alkoxide) Ligand

Treatment of Mn(N(SiMe₃)₂)₂(THF)₂ with bulky chelating bis(alkoxide) ligand [1,1′:4′,1′′-terphenyl]-2,2′′-diylbis(diphenylmethanol) (H₂[O-terphenyl-O]^Ph) formed a seesaw manganese(II) complex Mn[O-terphenyl-O]^Ph(THF)₂, characterized by structural, spectroscopic, magnetic, and analytical methods. The reactivity of Mn[O-terphenyl-O]^Ph(THF)₂ with various nitrene precursors was investigated. No reaction was observed between Mn[O-terphenyl-O]^Ph(THF)₂ and aryl azides. In contrast, the treatment of Mn[O-terphenyl-O]^Ph(THF)₂ with iminoiodinane PhINTs (Ts = p-toluenesulfonyl) was consistent with the formation of a metal-nitrene complex. In the presence of styrene, the reaction led to the formation of aziridine. Combining varying ratios of styrene and PhINTs in different solvents with 10 mol% of Mn[O-terphenyl-O]^Ph(THF)₂ at room temperature produced 2-phenylaziridine in up to a 79% yield. Exploration of the reactivity of Mn[O-terphenyl-O]^Ph(THF)₂ with various olefins revealed (1) moderate aziridination yields for p-substituted styrenes, irrespective of the electronic nature of the substituent; (2) moderate yield for 1,1′-disubstituted α-methylstyrene; (3) no aziridination for aliphatic α-olefins; (4) complex product mixtures for the β-substituted styrenes. DFT calculations suggest that iminoiodinane is oxidatively added upon binding to Mn, and the resulting formal imido intermediate has a high-spin Mn(III) center antiferromagnetically coupled to an imidyl radical. This imidyl radical reacts with styrene to form a sextet intermediate that readily reductively eliminates the formation of a sextet Mn(II) aziridine complex.

Cobalt-Catalyzed Hydrogenation Reactions Enabled by Ligand-Based Storage of Dihydrogen

The use of supporting ligands that can store either protons or electrons has emerged as a powerful strategy in catalysis. While these strategies are potent individually, natural systems mediate remarkable transformations by combining the storage of both protons and electrons in the secondary coordination sphere. As such, there has been recent interest in using this strategy to enable fundamentally different transformations. Furthermore, outsourcing H-atom or hydrogen storage to ancillary ligands can also enable alternative mechanistic pathways and thereby selectivity. Here, we describe the application of this strategy to facilitate radical reactivity in Co-based hydrogenation catalysis. Metalation of previously reported dihydrazonopyrrole ligands with Co results in paramagnetic complexes, which are best described as having Co(II) oxidation states. These complexes catalytically hydrogenate olefins with low catalyst loadings under mild conditions (1 atm H₂, 23 °C). Mechanistic, spectroscopic, and computational investigations indicate that this system goes through a radical hydrogen-atom transfer (HAT) type pathway that is distinct from classic organometallic mechanisms and is supported by the ability of the ligand to store H₂. These results show how ancillary ligands can facilitate efficient catalysis, and furthermore how classic organometallic mechanisms for catalysis can be altered by the secondary coordination sphere.

Combined radical and ionic approach for the enantioselective synthesis of β-functionalized amines from alcohols

Chiral amines are among the most important organic compounds and have widespread applications. Enantioselective construction of chiral amines is a major aim in organic synthesis. Among synthetic methods, direct functionalization of omnipresent C-H bonds with common organic nitrogen compounds represents one of the most attractive strategies. However, C-H amination strategies are largely limited to constructing a specific type of N-heterocycles or amine derivatives. To maximize the synthetic potential of asymmetric C-H amination, we report here an approach that unites the complementary reactivities of radical and ionic chemistry for streamlined synthesis of functionalized chiral amines. This synthesis merges the development of an enantioselective radical process for 1,5-C(sp ³)-H amination of alkoxysulfonyl azides via Co(II)-based metalloradical catalysis with an enantiospecific ionic process for ring-opening of the resulting five-membered chiral sulfamidates by nucleophiles. Given that alkoxysulfonyl azides are derived from the corresponding alcohols, this approach offers a powerful synthetic tool for enantioselective β-C-H amination of common alcohols while converting the hydroxy group to other functionalities through formal nucleophilic substitution.

Transition Metal Catalysis Controlled by Hydrogen Bonding in the Second Coordination Sphere

Transition metal catalysis is of utmost importance for the development of sustainable processes in academia and industry. The activity and selectivity of metal complexes are typically the result of the interplay between ligand and metal properties. As the ligand can be chemically altered, a large research focus has been on ligand development. More recently, it has been recognized that further control over activity and selectivity can be achieved by using the "second coordination sphere", which can be seen as the region beyond the direct coordination sphere of the metal center. Hydrogen bonds appear to be very useful interactions in this context as they typically have sufficient strength and directionality to exert control of the second coordination sphere, yet hydrogen bonds are typically very dynamic, allowing fast turnover. In this review we have highlighted several key features of hydrogen bonding interactions and have summarized the use of hydrogen bonding to program the second coordination sphere. Such control can be achieved by bridging two ligands that are coordinated to a metal center to effectively lead to supramolecular bidentate ligands. In addition, hydrogen bonding can be used to preorganize a substrate that is coordinated to the metal center. Both strategies lead to catalysts with superior properties in a variety of metal catalyzed transformations, including (asymmetric) hydrogenation, hydroformylation, C-H activation, oxidation, radical-type transformations, and photochemical reactions.

Access to β-Lactams via Iron-Catalyzed Olefin Oxyamidation Enabled by the π-Accepting Phthalocyanine Ligand

Herein, we report the development of an iron-catalyzed olefin oxyamidation by utilizing tethered dioxazolones as the nitrenoid precursor to produce valuable β-lactam scaffolds. Mechanistic studies revealed that a relatively strong π-accepting ability of the phthalocyanine ligand is critical in generating the key triplet iron-imidyl radical intermediate to enable the 4-exo-trig-lactamization with the incorporation of oxygen nucleophiles in high diastereoselectivity. This cyclization approach was readily extended to the highly efficient γ-lactam synthesis (TON > 300).

Recent advances in the direct construction of enantioenriched stereocenters through addition of radicals to internal alkenes

The development of new synthetic methods involving radical intermediates to control the absolute configuration of newly formed stereocenters has seen unprecedented growth in the past few decades. Despite significant advances in this topic, catalytic asymmetric direct construction of stereocenters through addition of radicals to internal alkenes is of special interest due to its potential to simultaneously build (more than) two consecutive stereogenic centers. Methodologies such as chiral Lewis acid catalysis, organocatalysis, and transition metal catalysis have been successfully leveraged to exert enantiocontrol in this challenging domain. This tutorial review highlights the recent significant progress in the realm of rapidly and conveniently building enantioenriched stereocenters via addition of radicals to internal alkenes, with an emphasis on mechanistic scenarios governing the absolute stereochemistry and unmet challenges in this emerging and promising field.

Nitrene transfer catalysts for enantioselective C–N bond formation

Transition-metal-catalysed, non-enzymatic transformations of C-H and C=C bonds to C-N bonds through nitrene transfer (NT) are powerful synthetic tools to prepare valuable amine building blocks. Although the first examples of racemic NT were reported more than 50 years ago, catalysts that mediate enantioselective NT with a broad substrate scope have been slow to emerge. However, the past ten years have seen the discovery of several first-row, second-row and third-row transition metal catalysts for asymmetric NT. This Review covers recent developments in asymmetric aziridination and C-H bond amination reactions. We describe catalyst design principles, re-evaluate traditional catalyst architectures, show how the scope of nitrene precursors has expanded and present new mechanistic insights. Following this, we highlight remaining opportunities and challenges to developing more practical and general synthetic methodologies. Realizing chemoselective, site-selective and enantioselective intermolecular NT will streamline amine synthesis and allow us to explore new chemical space.

Revisiting the Electronic Structure of Cobalt Porphyrin Nitrene and Carbene Radicals with NEVPT2-CASSCF Calculations: Doublet versus Quartet Ground States

Cobalt porphyrin complexes are established catalysts for carbene and nitrene radical group-transfer reactions. The key carbene and mono- and bisnitrene radical complexes coordinated to [Co(TPP)] (TPP = tetraphenylporphyrin) have previously been investigated with a variety of experimental techniques and supporting (single-reference) density functional theory (DFT) calculations that indicated doublet (S = 1/2) ground states for all three species. In this contribution, we revisit their electronic structures with multireference N-electron valence state perturbation theory (NEVPT2)-complete-active-space self-consistent-field (CASSCF) calculations to investigate possible multireference contributions to the ground-state wave functions. The carbene ([CoIII(TPP)(•CHCO2Et)]) and mononitrene ([CoIII(TPP)(•NNs)]) radical complexes were confirmed to have uncomplicated doublet ground states, although a higher carbene or nitrene radical character and a lower Co-C/N bond order was found in the NEVPT2-CASSCF calculations. Supported by electron paramagnetic resonance analysis and spin counting, paramagnetic molar susceptibility determination, and NEVPT2-CASSCF calculations, we report that the cobalt porphyrin bisnitrene complex ([CoIII(TPP•)(•NNs)2]) has a quartet (S = 3/2) spin ground state, with a thermally accesible multireference and multideterminant "broken-symmetry" doublet spin excited state. A spin flip on the porphyrin-centered unpaired electron allows for interconversion between the quartet and broken-symmetry doublet spin states, with an approximate 10-fold higher Boltzmann population of the quartet at room temperature.

Hypervalent-Iodine(III)-Mediated Tandem Oxidative Dearomatization/Aziridination of Phenolic Amines: Synthesis of Functionalized Unactivated Aziridines

A new hypervalent-iodine(III)-mediated tandem reaction involving oxidative dearomatization and in situ aziridination of phenolic amines is described, providing a mild and effective method for the assembly of structurally interesting and synthetically useful aziridines. Importantly, the densely functionalized aziridines resulting from this unprecedented tandem reaction offer a platform for expeditious access to architecturally diverse aza-heterocycles through transformations initiated by selective ring-opening of aziridines.

Is the Electrophilicity of the Metal Nitrene the Sole Predictor of Metal-Mediated Nitrene Transfer to Olefins? Secondary Contributing Factors as Revealed by a Library of High-Spin Co(II) Reagents

Recent research has highlighted the key role played by the electron affinity of the active metal-nitrene/imido oxidant as the driving force in nitrene additions to olefins to afford valuable aziridines. The present work showcases a library of Co(II) reagents that, unlike the previously examined Mn(II) and Fe(II) analogues, demonstrate reactivity trends in olefin aziridinations that cannot be solely explained by the electron affinity criterion. A family of Co(II) catalysts (17 members) has been synthesized with the assistance of a trisphenylamido-amine scaffold decorated by various alkyl, aryl, and acyl groups attached to the equatorial amidos. Single-crystal X-ray diffraction analysis, cyclic voltammetry and EPR data reveal that the high-spin Co(II) sites (S = 3/2) feature a minimal [N3N] coordination and span a range of 1.4 V in redox potentials. Surprisingly, the Co(II)-mediated aziridination of styrene demonstrates reactivity patterns that deviate from those anticipated by the relevant electrophilicities of the putative metal nitrenes. The representative L4Co catalyst (-COCMe3 arm) is operating faster than the L8Co analogue (-COCF3 arm), in spite of diminished metal-nitrene electrophilicity. Mechanistic data (Hammett plots, KIE, stereocontrol studies) reveal that although both reagents follow a two-step reactivity path (turnover-limiting metal-nitrene addition to the C b atom of styrene, followed by product-determining ring-closure), the L4Co catalyst is associated with lower energy barriers in both steps. DFT calculations indicate that the putative [L4Co]NTs and [L8Co]NTs species are electronically distinct, inasmuch as the former exhibits a single-electron oxidized ligand arm. In addition, DFT calculations suggest that including London dispersion corrections for L4Co (due to the polarizability of the tert-Bu substituent) can provide significant stabilization of the turnover-limiting transition state. This study highlights how small ligand modifications can generate stereoelectronic variants that in certain cases are even capable of overriding the preponderance of the metal-nitrene electrophilicity as a driving force.

Iron-Catalyzed Radical Activation Mechanism for Denitrogenative Rearrangement Over C(sp3 )-H Amination

An iron-catalyzed denitrogenative rearrangement of 1,2,3,4-tetrazole is developed over the competitive C(sp³ )-H amination. This catalytic rearrangement reaction follows an unprecedented metalloradical activation mechanism. Employing the developed method, a wide number of complex-N-heterocyclic product classes have been accessed. The synthetic utility of this radical activation method is showcased with the short synthesis of a bioactive molecule. Collectively, this discovery underlines the progress of radical activation strategy that should find wide application in the perspective of medicinal chemistry, drug discovery and natural product synthesis research.

Metalloradical activation of carbonyl azides for enantioselective radical aziridination

Organic azides have been increasingly employed as nitrogen sources for catalytic olefine aziridination due to their ease of preparation and generation of benign N₂ as the only byproduct. Among common organic azides, carbonyl azides have not been previously demonstrated as effective nitrogen sources for intermolecular olefin aziridination despite the synthetic utilities of N-carbonyl aziridines. As a new application of metalloradical catalysis, we have developed a catalytic system that can effectively employ the carbonyl azide TrocN₃ for highly asymmetric aziridination of alkenes at room temperature. The resulting enantioenriched N-Trocaziridines have been shown as valuable chiral synthons for stereoselective synthesis of other chiral aziridines and various chiral amines. The Co(II)-based metalloradical system, which proceeds with distinctive stepwise radical mechanism, may provide a general method for asymmetric synthesis of chiral aziridines from alkenes with organic azides.

Metalloradical complex Co-C˙Ph3 catalyzes the CO2 reduction in gas phase: a theoretical study

Metal-stabilized radicals have been increasingly exploited in modern organic synthesis. Here, we theoretically designed a metalloradical complex Co-C˙Ph3 with the triplet characters through the transition metal cobalt (Co0) coordinating a triphenylmethyl radical. The potential catalytic role of this novel metalloradical in the CO2 reduction with H2/CH4 in the gas phase was explored via density functional theory (DFT) calculations. For the CO2 reduction reaction with H2, there are two possible pathways: one (path A) is the activation of CO2 by Co-C˙Ph3, followed by the hydrogenation of CO2. The other (path B) starts from the splitting of the H-H bond by Co-C˙Ph3, leading to the transition-metal hydride complex CoH-H, which can reduce CO2. DFT computations show that path B is more favorable than path A as their rate-determining free energy barriers are 18.3 and 27.2 kcal mol-1, respectively. However, for the reduction of CO2 by CH4 two different products, CH3COOH and HCOOCH3, can be generated following different reaction routes. Both routes begin with one CH4 molecule approaching the metalloradical Co-C˙Ph3 to form the intermediate CoH-CH3. This intermediate can evolve following two different pathways, depending on whether the H bonded to Co is transferred to the O (pathway PO) or the C (pathway PC) of CO2. Comparing their rate-determining steps, we identified that the PO route is more favorable for the reduction of CO2 by CH4 to CH3COOH with the reaction barrier 24.5 kcal mol-1. Thus, the present Co0-based metalloradical system represents a viable catalytic protocol that can contribute to the effective utilization of small molecules (H2 and CH4) to reduce CO2, and provides an alternative strategy for the exploration of CO2 conversion.

Constructing chiral aza-quaternary carbon centers by enantioselective carbonylative Heck reaction of o-iodoanilines with allenes

The construction of chiral aza-quaternary C-centers via C–N bond formation is achieved by a Pd-catalysed asymmetric carbonylative Heck reaction of o-iodoanilines with allenes, providing chiral dihydroquinolinone derivatives with moderate to high yield and enantiomeric ratio.

Enantioconvergent Amination of Racemic Tertiary C-H Bonds

Racemization is considered to be an intrinsic stereochemical feature of free radical chemistry as can be seen in traditional radical halogenation reactions of optically active tertiary C-H bonds. If the facile process of radical racemization could be effectively combined with an ensuing step of bond formation in an enantioselective fashion, then it would give rise to deracemizative functionalization of racemic tertiary C-H bonds for stereoselective construction of chiral molecules bearing quaternary stereocenters. As a demonstration of this unique potential in radical chemistry, we herein report that metalloradical catalysis can be successfully applied to devise Co(II)-based catalytic system for enantioconvergent radical amination of racemic tertiary C(sp³)-H bonds. The key to the success of the radical process is the development of Co(II)-based metalloradical catalyst with fitting steric, electronic, and chiral environments of the D₂-symmetric chiral amidoporphyrin as the supporting ligand. The existence of optimal reaction temperature is recognized as an important factor in the realization of the enantioconvergent radical process. Supported by an optimized chiral ligand, the Co(II)-based metalloradical system can effectively catalyze the enantioconvergent 1,6-amination of racemic tertiary C(sp³)-H bonds at the optimal temperature, affording chiral α-tertiary amines in excellent yields with high enantiocontrol of the newly created quaternary stereocenters. Systematic studies, including experiments utilizing optically active deuterium-labeled C-H substrates as a model system, shed light on the underlying mechanistic details of this new catalytic process for enantioconvergent radical C-H amination. The remarkable power to create quaternary stereocenters bearing multiple functionalities from ubiquitous C-H bonds, as showcased with stereoselective construction of bicyclic N-heterocycles, opens the door for future synthetic applications of this new radical technology.

In Crystallo Snapshots of Rh2-Catalyzed C-H Amination

While X-ray crystallography routinely provides structural characterization of kinetically stable pre-catalysts and intermediates, elucidation of the structures of transient reactive intermediates, which are intimately engaged in bond-breaking and -making during catalysis, is generally not possible. Here, we demonstrate in crystallo synthesis of Rh₂ nitrenoids that participate in catalytic C-H amination, and we characterize these transient intermediates as triplet adducts of Rh₂. Further, we observe the impact of coordinating substrate, which is present in excess during catalysis, on the structure of transient Rh₂ nitrenoids. By providing structural characterization of authentic C-H functionalization intermediates, and not kinetically stabilized model complexes, these experiments provide the opportunity to define critical structure-activity relationships.

A "Polymer Template" Strategy for Carbonized Polymer Dots with Controllable Properties

Limited avenues are available for property control of carbonized polymer dots (PDs) owing to the unsatisfactory understanding of PDs" formation. Herein, a de novo "polymer template" strategy is presented for PDs with customizable functional surface groups (FSG), size, and underlying fluorescence, with a detailed mechanism. The strategy relies on novel di-active site polymers (DASPs) prepared from alkenyl azides via [3+2] cycloaddition and guanidino hydrolysis. Benefiting from these specific reactions, the DASPs were convenient for mass production and stable for storage, and could be transformed to PDs upon addition of nucleophilic agents through nucleophilic addition and substitution at 70 °C. By regulating the types of alkenyl azides, nucleophilic agents, and reaction conditions, the as-prepare PDs could be tailored with controlled types of core, FSG, and particle size, as well as fluorescence properties of quantum yield from 8.2-55.6 %, and emission maximum from 380-500 nm. These specialties make this "polymer template" strategy a promising start for building PDs-based sensor platforms. Moreover, the strategy could further our understanding towards PDs' formation, and open up a new way to customize PDs for specific needs in the fields of analysis, catalysis, images, etc.

Co-Catalyzed Transannulation of Pyridotriazoles with Isothiocyanates and Xanthate Esters

An efficient radical transannulation reaction of pyridotriazoles with isothiocyanates and xanthate esters was developed. This method features conversion of pyridotriazoles into two N-fused heterocyclic aromatic systems-imino-thiazolopyridines and oxo-thiazolopyridine derivatives-via one-step Co(II)-catalyzed transannulation reaction proceeding via a radical mechanism. The synthetic usefulness of the developed method was illustrated in the synthesis of amino acid derivatives and further transformations of obtained reaction products.