Competitive Multiple-Mechanism-Driven Electrochemiluminescent Detection of 8-Hydroxy-2′-deoxyguanosine

Triblock polyadenine-based electrochemical aptasensor for ultra-sensitive detection of carcinoembryonic antigen via exonuclease III-assisted target recycling and hybridization chain reaction

Carcinoembryonic antigen (CEA), a key colon biomarker, demands a precise detection method for cancer diagnosis and prognosis. This study introduces a novel electrochemical aptasensor using a triblock polyadenine probe for ultra-sensitive detection of CEA. The method leverages Exonuclease III (Exo III)-assisted target recycling and hybridization chain reaction. The triblock polyadenine probe self-assembles on the bare gold electrode through the strong affinity between adenine and gold electrode, blocking CEA diffusion and providing a large immobilization surface. CEA binding to hairpin probe 1 (HP1), followed by the hybridization between HP1 and hairpin probe 2 (HP2), triggers DNA cleavage by Exo III, amplifying the signal via a hybridization chain reaction and producing numerous dsDNA walkers that generates a dramatic electrochemical impedance signal. Under optimized conditions, the aptasensor achieved two ultra-low detection limits: 0.39 ag∙mL-1 within the concentration range of 5 ag∙mL-1 to 5 × 106 ag∙mL-1, and 1.5 ag∙mL-1 within the concentration range of 5 × 106 ag∙mL-1 to 1 × 1010 ag∙mL-1. Its performance in human serum samples meets the practical standards, offering a promising new tool for ultrasensitive tumor marker detection, potentially revolutionizing early cancer diagnosis.

Critical Aspects and Challenges in the Design of Small Molecules for Electrochemiluminescence (ECL) Application

Electrochemiluminescence (ECL) has gained renewed interest due to the strong parallel development of luminophores in the field of organic light emitting diodes (OLEDs) with which this technique shares several aspects. In this perspective review we discuss the most relevant advances of the past 15 years in the study of organic and organometallic compounds as ECL emitters, by dividing them in three different classes: i) fluorescent emitters, ii) phosphorescent emitters and iii) Thermally Activated Delayed Fluorescence (TADF) emitters; then, water-soluble organic luminophores will be also discussed. We focus on how their design, their photo- and electrochemical properties and, in particular, the nature of the emitter, affect their efficiency in ECL. Regardless of the type of luminophore or the photoluminescence quantum yield (PLQY), the literature converges on the fact that the most determining aspect is the stability of the oxidized/reduced form of the emitter. Even if phosphorescent emitters can show outstanding efficiency, this often requires the absence of oxygen. In the case of TADFs, there is also a strong dependence of photoluminescence both in terms of PLQY and emission energy on the polarity of the media, so compounds, that appear promising in organic solvents, may be very inefficient in aqueous media.

Low-Triggering-Potential and Narrow-Potential-Window Electrochemiluminescence of Silver Nanoclusters for Gene Assay

A low-triggering potential and a narrow-potential window are anticipated to decrease the electrochemical interference and cross talk of electrochemiluminescence (ECL). Herein, by exploiting the low oxidative potential (0.82 V vs Ag/AgCl) of dihydrolipoic acid-capped sliver nanoclusters (DHLA-AgNCs), a coreactant ECL system of DHLA-AgNCs/hydrazine (N2H4) is proposed to achieve efficient and oxidative-reduction ECL with a low-triggering potential of 0.82 V (vs Ag/AgCl) and a narrow-potential window of 0.22 V. The low-triggering-potential and narrow-potential-window nature of ECL can be primarily preserved upon labeling DHLA-AgNCs to probe DNA and immobilizing DHLA-AgNCs onto the Au surface via sandwiched hybridization, which eventually enables a selective ECL strategy for the gene assay at +0.82 V. This gene assay strategy can sensitively determine the gene of human papillomavirus from 10 to 1000 pM with a low limit of detection of 5 pM (S/N = 3) and would open a way to improve the applied ECL bioassay.

Timescale correlation of shallow trap states increases electrochemiluminescence efficiency in carbon nitrides

Highly efficient interconversion of different types of energy plays a crucial role in both science and technology. Among them, electrochemiluminescence, an emission of light excited by electrochemical reactions, has drawn attention as a powerful tool for bioassays. Nonetheless, the large differences in timescale among diverse charge-transfer pathways from picoseconds to seconds significantly limit the electrochemiluminescence efficiency and hamper their broad applications. Here, we report a timescale coordination strategy to improve the electrochemiluminescence efficiency of carbon nitrides by engineering shallow electron trap states via Au-N bond functionalization. Quantitative electrochemiluminescence kinetics measurements and theoretic calculations jointly disclose that Au-N bonds endow shallow electron trap states, which coordinate the timescale of the fast electron transfer in the bulk emitter and the slow redox reaction of co-reagent at diffusion layers. The shallow electron trap states ultimately accelerate the rate and kinetics of emissive electron-hole recombination, setting a new cathodic electrochemiluminescence efficiency record of carbon nitrides, and empowering a visual electrochemiluminescence sensor for nitrite ion, a typical environmental contaminant, with superior detection range and limit.

A carrier-free tri-component nanoreactor for multi-pronged synergistic cancer therapy

Non-invasive therapies such as photodynamic therapy (PDT) and chemodynamic therapy (CDT) have received wide attention due to their low toxicity and side effects, but their efficacy is limited by the tumor microenvironment (TME), and monotherapy cannot achieve satisfactory efficacy. In this work, a multifunctional nanoparticle co-assembled from oleanolic acid (OA), chlorin e6 (Ce6) and hemin was developed. The as-constructed nanoparticle named OCH with diameters of around 130 nm possessed good biostability, pH/GSH dual-responsive drug release properties, and remarkable cellular internalization and tumor accumulation capabilities. OCH exhibited prominent catalytic activities to generate •OH, deplete GSH, and produce O2 to overcome the hypoxia TME, thus potentiating the photodynamic and chemodynamic effect. In addition, OCH can induce the occurrence of ferroptosis in both ferroptosis-sensitive and ferroptosis-resistant cancer cells. The multi-pronged effects of OCH including hypoxia alleviation, GSH depletion, ferroptosis induction, CDT and PDT effects jointly facilitate excellent anticancer effects in vitro and in vivo. Hence, this work will advance the development of safe and effective clinically transformable nanomedicine by employing clinically-applied agents to form drug combinations for efficient multi-pronged combination cancer therapy.

The Compact Integration of Multiple Exonuclease III-Assisted Cyclic Amplification Units for High-Efficiency Ratiometric Electrochemiluminescence Detection of MRSA

Methicillin-resistant Staphylococcus aureus (MRSA) exhibits multiresistance to a plethora of antibiotics, therefore, accurate detection methods must be employed for timely identification to facilitate effective infection control measures. Herein, we construct a high-efficiency ratiometric electrochemiluminescent (ECL) biosensor that integrates multiple exonuclease (Exo) III-assisted cyclic amplification units for rapid detection of trace amounts of MRSA. The target bacteria selectively bind to the aptamer, triggering the release of two single-stranded DNAs. One released DNA strand initiates the opening of a hairpin probe, inducing exonuclease cleavage to generate a single strand that can form a T-shaped structure with the double strand connecting the oxidation-reduction (O-R) emitter of N-(4-aminobutyl)-N-ethylisoluminol gold (ABEI-Au). Consequently, ABEI-Au is released upon Exo III cleavage. The other strand unwinds the hairpin DNA structure on the surface of the reduction-oxidation (R-O) emitter ZIF-8@CdS, facilitating the subsequent release of a specific single strand through Exo III cleavage. This process effectively anchors the cathode-emitting material to the electrode. The Fe(III) metal-organogel (Fe-MOG) is selected as a substrate, in which the catalytic reduction of hydrogen peroxide by Fe(III) active centers accelerates the generation of reactive oxygen species and enhances signals from both ABEI-Au and ZIF-8@CdS. In this way, the two emitters cooperate to achieve bacterial detection at the single-cell level, and a good linear range is obtained in the range of 100-107 CFU/mL. Moreover, the sensor exhibited excellent performance in detecting MRSA across various authentic samples and accurately quantifying MRSA levels in serum samples, demonstrating its immense potential in addressing clinical bacterial detection challenges.

Recent progress of oxidative stress associated biomarker detection

Oxidative stress denotes the imbalance between the generation of reactive oxygen species (ROS) and antioxidant defenses in living organisms, participating in various pathophysiological processes and mediating the occurrence of diseases. Typically, the excessive production of ROS under oxidative stress elicits oxidative modification of biomacromolecules, including lipids, proteins and nucleic acids, leading to cell dysfunction and damage. Therefore, the analysis and detection of oxidative stress-associated biomarkers are of considerable importance to accurately reflect and evaluate the oxidative stress status. This review comprehensively elucidates the recent advances and applications of imaging probes for tracking and detecting oxidative stress-related biomarkers such as lipid peroxidation, and protein and DNA oxidation. The existing challenges and future development directions in this field are also discussed.

Highly Efficient Wavelength-Resolved Electrochemiluminescence of Carbon Nitride Films for Ultrasensitive Multiplex MicroRNA Detection

The development of electrochemiluminescence (ECL) emitters of different colors with high ECL efficiency (Φ_ECL) is appealing yet challenging for ultrasensitive multiplexed bioassays. Herein, we report the synthesis of highly efficient polymeric carbon nitride (CN) films with fine-tuned ECL emission from blue to green (410, 450, 470, and 525 nm) using the precursor crystallization method. More importantly, naked eye-observable and significantly enhanced ECL emission was achieved, and the cathodic Φ_ECL values were ca. 112, 394, 353, and 251 times those of the aqueous Ru(bpy)₃Cl₂/K₂S₂O₈ reference. Mechanism studies showed that the density of surface-trapped electrons, the associated nonradiative decay pathways, and electron-hole recombination kinetics were crucial factors for the high Φ_ECL of CN. Based on high Φ_ECL and different colors of ECL emission, the wavelength-resolved multiplexing ECL biosensor was constructed to simultaneously detect miRNA-21 and miRNA-141 with superior low detection limits of 0.13 fM and 25.17 aM, respectively. This work provides a facile method to synthesize wavelength-resolved ECL emitters based on metal-free CN polymers with high Φ_ECL for multiplexed bioassays.

Elucidating Electrocatalytic Oxygen Reduction Kinetics via Intermediates by Time-Dependent Electrochemiluminescence

Facile evaluation of oxygen reduction reaction (ORR) kinetics for electrocatalysts is critical for sustainable fuel-cell development and industrial H₂ O₂ production. Despite great success in ORR studies using mainstream strategies, such as the membrane electrode assembly, rotation electrodes, and advanced surface-sensitive spectroscopy, the time and spatial distribution of reactive oxygen species (ROS) intermediates in the diffusion layer remain unknown. Using time-dependent electrochemiluminescence (Td-ECL), we report an intermediate-oriented method for ORR kinetics analysis. Owing to multiple ultrasensitive stoichiometric reactions between ROS and the ECL emitter, except for electron transfer numbers and rate constants, the potential-dependent time and spatial distribution of ROS were successfully obtained for the first time. Such exclusively uncovered information would guide the development of electrocatalysts for fuel cells and H₂ O₂ production with maximized activity and durability.

Electrochemiluminescence Distance and Reactivity of Coreactants Determine the Sensitivity of Bead-Based Immunoassays

Herein we report the study of electrochemiluminescence (ECL) generation by tris(2,2'-bipyridyl)ruthenium (Ru(bpy)₃ ²⁺ ) and five tertiary amine coreactants. The ECL distance and lifetime of coreactant radical cations were measured by ECL self-interference spectroscopy. And the reactivity of coreactants was quantitatively evaluated in terms of integrated ECL intensity. By statistical analysis of ECL images of single Ru(bpy)₃ ²⁺ -labeled microbeads, we propose that ECL distance and reactivity of coreactant codetermine the emission intensity and thus the sensitivity of immunoassay. 2,2-bis(hydroxymethyl)-2,2',2''-nitrilotriethanol (BIS-TRIS) can well balance ECL distance-reactivity trade-off and enhance the sensitivity by 236 % compared with tri-n-propylamine (TPrA) in the bead-based immunoassay of carcinoembryonic antigen. The study brings an insightful understanding of ECL generation in bead-based immunoassay and a way of maximizing the analytical sensitivity from the aspect of coreactant.

In situ coordination interactions between metal-organic framework nanoemitters and coreactants for enhanced electrochemiluminescence in biosensing

Coreactant electrochemiluminescence (ECL) is one of the most popular pathways in commercial analysis, which can provide simplicity and convenience for getting intense ECL emission. However, the low efficiency of intermolecular electron transfer could weaken ECL intensity. In this work, we developed an enhanced ECL strategy through in situ coordination interactions between metal-organic framework emitters and coreactants. First, a metal-organic framework (MOF) emitter was synthesized with 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane (TPPE) as aggregation-induced emission linkers and Zn as nodes. Interestingly, compared to TPPE ligand, the resulted MOF nanoemitters demonstrated 49.5 folds enhancement of ECL emission in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) as the coreactant. More significantly, different from the constant ECL intensity using TPrA coreactant, DABCO exhibited time-dependent ECL intensity due to the intrareticular electron transfer through coordination interaction between DABCO and Zn²⁺, which was confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared spectral experiments. The enhanced ECL was then applied to construct a sensitive ECL method to detect dopamine in serum samples. The coordination interaction between emitters and coreactants not only provides a universal way to enhance ECL, but also expands the applications of coreactant ECL system in convenience route.

A novel highly sensitive compilation-detachment fluorescence sensing strategy based on RNA-cleavage DNAzyme for MDA-MB-231 breast cancer biomarker determination

Herein, we designed a novel and highly sensitive fluorescence multicomponent detachable platform for MDA-MB-231 breast cancer cell detection as a model. The RNA cleavage DNAzyme was used as a central operator of the multicomponent probe through which compilation and induced detachment of probe was done. During the compilation step, the dsDNA-Sybr green 1 complexes on gold nanoparticles (GNP@dsDNA@SG1) were assembled. The intercalated Sybr green in the DNA structure has been used as an amplified signal generator on one site of DNAzyme and magnetic nanoparticles (MNP) act as a biological carrier and probe collector on the opposite side. The enzyme activator co-factor (MDA-MB-231 cell cytoplasmic protein) provokes the activation of the catalytic core of enzyme sequence in the DNAzyme molecule, followed by cleavage reaction in the substrate sequence and releasing GNP@ dsDNA@SG1 into the solution. The results indicate that the Sybr green emission fluorescence (520 nm) increases with the increment of MDA-MB-231 protein concentration in the linear dynamic range of 8.10 × 10^-2 to 1.95 ng ml^-1 (0.77 × 10^-3-0.019 cell ml^-1) with a detection limit (LOD) of 1/72 × 10^-2 pg ml^-1 under optimal conditions. The proposed immunosensor has great potential in developing ultrasensitive and rapid diagnostic platforms.

ssDNA-C3N4 conjugates-based nanozyme sensor array for discriminating mycotoxins

A nanozyme sensor array based on the ssDNA-distensible C3N4 nanosheet sensor elements for discriminating multiple mycotoxins commonly existing in contaminated cereals has been explored. The sensor array exploited (a) three DNA nonspecific sequences (A40, T40, C40) absorbed on the C3N4 nanosheets as sensor elements catalyzing the oxidation of TMB; (b) the presence of five mycotoxins affected the catalytic activity of three nanozymes with various degrees. The parameter (A₀-A) was employed as the signal output to obtain the response patterns for different mycotoxins with the same concentration where A₀ and A were the absorption peak values at 650 nm of oxTMB in the absence and presence of target mycotoxins, respectively. After the raw data was subjected to principal component analysis, 3D canonical score plots were obtained. The sensor array was capable of separating five mycotoxins from each other with 100% accuracy even if the concentration of the mycotoxins was as low as 1 nM. Moreover, the array performed well in discriminating the mycotoxin mixtures with different ratios. Importantly, the practicality of this sensor array was demonstrated by discriminating the five mycotoxins spiking in corn-free samples in 3D canonical score plots, validating that the sensor array can act as a flexible detection tool for food safety. A nanozyme sensor array was developed based on the ssDNA-distensible C3N4 NSs sensor elements for discriminating muitiple mycotoxins.

Graphdiyne: A New Carbon Allotrope for Electrochemiluminescence

Graphdiyne (GDY), a well-known 2D carbon allotrope, demonstrates increasing fantastic performance in various fields owing to its outstanding electronic properties. Owing to its unique properties, electrochemiluminescence (ECL) technology is one powerful tool for understanding fundamental questions and for ultrasensitive sensing and imaging. Here, we firstly find that GDY without any functionalization or treatment shows a strong ECL emission with potassium persulfate (K₂ S₂ O₈ ) as coreactant, which is totally different with other carbon allotropes. Mechanistic study indicates that the ECL emission of GDY is generated by the surface state transition. Interestingly, ECL is generated at 705 nm in the near infrared region with an ECL efficiency of 424 % compared to that of Ru(bpy)₃ Cl₂ /K₂ S₂ O₈ . The study demonstrates a new character of GDY in ECL investigation and sets the stage for the development of GDY for emerging applications, including imaging and light-emitting devices.

Polymeric carbon nitride-based materials: Rising stars in bioimaging

Polymeric carbon nitrides (CN), due to their unique physicochemical properties, versatile surface functionalization, ultra-high surface area, and good biocompatibility, have attracted considerable interest in diverse biomedical applications, such as biosensors, drug delivery, bioimaging, and theranostics. In this review, the recent advances in bioimaging of CN-based nanomaterials are summarized according to the imaging modalities, including optical (fluorescence and Raman) imaging, magnetic resonance imaging (MRI), photoacoustic imaging (PAI), computed tomography (CT), and multimodal imaging. The pros and cons of CN bioimaging are comprehensively analyzed and compared with those in previous reports. In the end, the prospects and challenges of their future bioimaging applications are outlooked.

A dual-mechanism-driven electrochemiluminescence aptasensor for sensitive detection of β-amyloid peptides

β-Amyloid (Aβ) peptides can bind both Cu²⁺ and heme cofactors simultaneously to form heme-Cu²⁺-Aβ complexes, which are proposed to generate toxic partially reduced oxygen species (PROS, e.g., H₂O₂) and play a vital role in Alzheimer's disease (AD). In this paper, a competitive dual-mechanism-driven electrochemiluminescence (ECL) aptasensor integrating the synergistic enhancement and steric hindrance effect was described for Aβ detection. Specifically, graphite carbon nitride (g-C₃N₄) as an effective ECL luminescent substrate and Au nanoparticles were sequentially assembled on the Au electrode surface, and then a thiol-modified aptamer for capturing Aβ peptide was attached to the surface of the electrode through the Au-S bond. Aβ peptides were simultaneously incubated with heme and Cu²⁺, and the forming heme-Cu²⁺-Aβ complexes were subsequently anchored on the electrode through the specific recognition between the target Aβ and the aptamer. When the concentration of the target Aβ is low, the synergistic enhancement effect arising from K₂S₂O₈ with in situ generated H₂O₂ is predominant, resulting in an increase in the ECL signal of g-C₃N₄. In contrast, when the concentration of Aβ is high, the steric hindrance effect generated from heme-Cu²⁺-Aβ complexes is dominant, leading to a decrease in the ECL signal. The present sensor exhibits a favorable linear response for the detection of Aβ with a relatively low detection limit of 0.24 pM, and provides a more sensitive and selective platform for bioanalysis.

New diagnostic and therapeutic strategies for myocardial infarction via nanomaterials

Myocardial infarction is lethal to patients because of insufficient blood perfusion to vital organs. Several attempts have been made to improve its prognosis, among which nanomaterial research offers an opportunity to address this problem at the molecular level and has the potential to improve disease prevention, diagnosis, and treatment significantly. Up to now, nanomaterial-based technology has played a crucial role in broad novel diagnostic and therapeutic strategies for cardiac repair. This review summarizes various nanomaterial applications in myocardial infarction from multiple aspects, including high precision detection, pro-angiogenesis, regulating immune homeostasis, and miRNA and stem cell delivery vehicles. We also propose promising research hotspots that have not been reported much yet, such as conjugating pro-angiogenetic elements with nanoparticles to construct drug carriers, developing nanodrugs targeting other immune cells except for macrophages in the infarcted myocardium or the remote region. Though most of those strategies are preclinical and lack clinical trials, there is tremendous potential for their further applications in the future.

Lighting Up Electrochemiluminescence-Inactive Dyes via Grafting Enabled by Intramolecular Resonance Energy Transfer

Due to near-zero optical background and photobleaching, electrochemiluminescence (ECL), an optical phenomenon excited by electrochemical reactions, has drawn extensive attention, especially for ultrasensitive bioassays. Developing diverse ECL emitters is crucial to unlocking their multiformity and performances but remains a formidable challenge due to the rigorous requirements for ECL. Herein, we report a general strategy to light up ECL-inactive dyes in an aqueous solution via grafting, a well-developed concept for plant propagation since 500 BCE. As a proof of concept, a series of luminol donor-dye acceptor-based ECL emitters were grafted with near-unity resonance energy transfer (RET) efficiency and coarse/fine-tunable emission wavelengths. Rather than the sophisticated design of new skeleton-based molecules to meet all of the prerequisites for ECL in a constrained manner, each unit in the proposed ECL ensemble performed its functions maximally. As a result, beyond traditional two-dimensional (2D) ones, a three-dimensional (3D) coordinate biosensing system, simultaneously showing a calibration curve and selectivity, was established using the new ECL emitter. This lighting up strategy would generally address the scarcity of ECL emitters and enable unprecedented functions.

Photoelectrochemical Detection of Exosomal miRNAs by Combining Target-Programmed Controllable Signal Quenching Engineering

MicroRNAs extracted from exosomes (exosomal miRNAs) have recently emerged as promising biomarkers for early prognosis and diagnosis. Thus, the development of an effective approach for exosomal miRNA monitoring has triggered extensive attention. Herein, a sensitive photoelectrochemical (PEC) biosensing platform is demonstrated for exosomal miRNA assay via the target miRNA-powered λ-exonuclease for the amplification strategy. The metal-organic framework (MOF)-decorated WO₃ nanoflakes heterostructure is constructed and implemented as the photoelectrode. Also, a target exosomal miRNA-activatable programmed release nanocarrier was fabricated, which is responsible for signal control. Hemin that acted as the electron acceptor was prior entrapped into the programmed control release nanocarriers. Once the target exosomal miRNAs-21 was introduced, the as-prepared programmed release nanocarriers were initiated to trigger the release of hemin, which enabled the quenching of the photocurrent. Under the optimized conditions, the level of exosomal miRNAs-21 could be accurately tracked ranging from 1 fM to 0.1 μM with a low detection limit of 0.5 fM. The discoveries illustrate the possibility for the rapid and efficient diagnosis and prognosis prediction of diseases based on the detection of exosomal miRNAs-21 and would provide feasible approaches for the fabrication of an efficient platform for clinical applications.

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

The classic and most widely used co-reactant electrochemiluminescence (ECL) reaction of tris(2,2'-bipyridine)ruthenium(ii) ([Ru(bpy)3]2+) and tri-n-propylamine is enhanced by an order of magnitude by fac-[Ir(sppy)3]3- (where sppy = 5'-sulfo-2-phenylpyridinato-C 2,N), through a novel 'redox mediator' pathway. Moreover, the concomitant green emission of [Ir(sppy)3]3-* enables internal standardisation of the co-reactant ECL of [Ru(bpy)3]2+. This can be applied using a digital camera as the photodetector by exploiting the ratio of R and B values of the RGB colour data, providing superior sensitivity and precision for the development of low-cost, portable ECL-based analytical devices.

A label-free and ultrasensitive electrochemical biosensor for oral cancer overexpressed 1 gene via exonuclease III-assisted target recycling and dual enzyme-assisted signal amplification strategies

A label-free and ultrasensitive electrochemical biosensor for ORAOV1 gene via exonuclease III-assisted target recycling and dual enzyme-assisted signal amplification strategies. The detection limit of ORAOV1 gene was as low as 0.019 fM.

Plasmon-Enhanced Nitrogen Vacancy-Rich Carbon Nitride Electrochemiluminescence Aptasensor for Highly Sensitive Detection of miRNA

The development of biosensors for biologically important substances with ultralow content such as microRNA is of great significance. Herein, a novel surface plasmon-enhanced electrogenerated chemiluminescence-based aptasensor was developed for ultrasensitive sensing of microRNA by using nitrogen vacancy-rich carbon nitride nanosheets as effective luminophores and gold nanoparticles as plasmonic sources. The introduction of nitrogen vacancies improved the electrochemiluminescence behavior due to improved conductance and electrogenerated chemiluminescence activity. The introduction of plasmonic gold nanoparticles increased the electrochemiluminescence signal intensity by more than eightfold. The developed surface plasmon-enhanced electrogenerated chemiluminescence aptasensor exhibited good selectivity, ultrasensitivity, excellent stability, and reproducibility for the determination of microRNA-133a, with a dynamic linear range of 1 aM to 100 pM and a limit of detection about 0.87 aM. Moreover, the surface plasmon-enhanced electrogenerated chemiluminescence sensor obtained a good recovery when detecting the content of microRNA in actual serum.

Point-Defect Engineering: Leveraging Imperfections in Graphitic Carbon Nitride (g-C3 N4 ) Photocatalysts toward Artificial Photosynthesis

Graphitic carbon nitride (g-C₃ N₄ ) is a kind of ideal metal-free photocatalysts for artificial photosynthesis. At present, pristine g-C₃ N₄ suffers from small specific surface area, poor light absorption at longer wavelengths, low charge migration rate, and a high recombination rate of photogenerated electron-hole pairs, which significantly limit its performance. Among a myriad of modification strategies, point-defect engineering, namely tunable vacancies and dopant introduction, is capable of harnessing the superb structural, textural, optical, and electronic properties of g-C₃ N₄ to acquire an ameliorated photocatalytic activity. In view of the burgeoning development in this pacey field, a timely review on the state-of-the-art advancement of point-defect engineering of g-C₃ N₄ is of vital significance to advance the solar energy conversion. Particularly, insights into the intriguing roles of point defects, the synthesis, characterizations, and the systematic control of point defects, as well as the versatile application of defective g-C₃ N₄ -based nanomaterials toward photocatalytic water splitting, carbon dioxide reduction and nitrogen fixation will be presented in detail. Lastly, this review will conclude with a balanced perspective on the technical and scientific hindrances and future prospects. Overall, it is envisioned that this review will open a new frontier to uncover novel functionalities of defective g-C₃ N₄ -based nanostructures in energy catalysis.

Arousing Electrochemiluminescence Out of Non-Electroluminescent Monomers within Covalent Organic Frameworks

Covalent organic frameworks (COFs) with stable long-range ordered arrangements are promising materials for organic optoelectronics. However, their electrochemiluminescence (ECL) from non-ECL active monomers has not been realized. Here, we report a design strategy for ECL-emitting COF family. The donors and acceptors co-crystallized and stacked into the highly aligned array of olefin-linked COFs, so that electrons can be transported freely. By this means, a tunable ECL is activated from non-ECL molecules with the maximum efficiency of 32.1% in water with the dissolved oxygen as an inner coreactant, and no additional noxious co-reactant is needed any more. Quantum chemistry calculations further demonstrate that this design reduces the COFs' band gaps and the overlap of electrons and holes in the excited state for better photoelectric properties and stronger ECL signals. This work exploits a basis to envisage the broad application potential of ECL-COFs for various biosensors and light-emitting display.

Recent advances of functional nucleic acids-based electrochemiluminescent sensing

Electroluminescence (ECL) has been used in extensive applications ranging from bioanalysis to clinical diagnosis owing to its simple device requirement, low background, high sensitivity, and wide dynamic range. Nucleic acid is a significant theme in ECL bioanalysis. The inherent versatile selective molecular recognition of nucleic acids and their programmable self-assembly make it desirable for the robust construction of nanostructures. Benefiting from their unique structures and physiochemical properties, ECL biosensing based on nucleic acids has experienced rapid growth. This review focuses on recent applications of nucleic acids in ECL sensing systems, particularly concerning the employment of nucleic acids as molecular recognition elements, signal amplification units, and sensing interface schemes. In the end, an outlook of nucleic acid-based ECL biosensing will be provided for future developments and directions. We envision that nucleic acids, which act as an essential component for both bioanalysis and clinical diagnosis, will provide a new thinking model and driving force for developing next-generation sensing systems.

Self-Assembling Porphyrins as a Single Therapeutic Agent for Synergistic Cancer Therapy: A One Stone Three Birds Strategy

Combining photodynamic therapy (PDT), chemodynamic therapy (CDT), and ferroptosis is a valuable means for an enhanced anticancer effect. However, traditional combination of PDT/CDT/ferroptosis faces several hurdles, including excess glutathione (GSH) neutralization and preparation complexity. In this work, a versatile multifunctional nanoparticle (HCNP) self-assembled from two porphyrin molecules, chlorin e6 and hemin, is developed. The as-constructed HCNPs exhibit a peroxidase-mimic catalytic activity, which can lead to the in situ generation of endogenous O2, thereby enhancing the efficacy of PDT. Furthermore, the generation of hydroxyl radicals (•OH) in the tumor environment in reaction to the high level of H2O2 and the simultaneous disruption of intracellular GSH endow the HCNPs with the capacity of enhanced CDT, resulting in a more effective therapeutic outcome in combination with PDT. More importantly, GSH depletion further leads to the inactivation of GSH peroxide 4 and induced ferroptosis. Both in vitro and in vivo results showed that the combination of PDT/CDT/ferroptosis realizes highest antitumor efficacy significantly under laser irradiation. Therefore, by integrating the superiorities of O2 and •OH generation capacity, GSH-depletion effect, and bioimaging into a single nanosystem, the HCNPs are a promising single therapeutic agent for tumor PDT/CDT/ferroptosis combination therapy.

Lowly-aggregated perylene diimide as a near-infrared electrochemiluminescence luminophore for ultrasensitive immunosensors at low potentials

In the electrochemiluminescence (ECL) field, most reported luminophores were focused on high-triggering potential and short wavelength, which was adverse for the ECL theory study and application at low potentials. Perylene diimide derivatives could emit near-infrared (NIR) ECL at low-triggering potential; however, they are always highly aggregated into a microrod structure and stacked together, which largely limited their application in biological fields such as bio-sensing and bio-imaging. To overcome these obstacles, we designed a novel perylene diimide molecule, namely N,N'-dicaproate sodium-3,4,9,10-perylenedicarboximide (PDI-COONa). This molecule self-assembled into a two-dimensional network nanostructure, which largely decreased the aggregation degree of PDI molecules and provided solid bases for designing lowly-aggregated PDI molecules. Also, the formed nanoluminophore produced strong emission at -0.26 V with an NIR wavelength 700 nm, which should be due to the excited J-type PDI-COO^- dimers. Moreover, this network nanoluminophore well-dispersed on graphene oxide (GO) as an ECL nanomaterial to label secondary antibodies and fabricate a sandwiched immunosensor for alpha-fetoprotein (AFP) detection between 0 and -0.6 V. This immunosensor showed a wider linear response for AFP ranging from 0.1 fg mL^-1 to 1 μg mL^-1 with a low detection limit 0.0353 fg mL^-1 compared with other immunosensors based on PDI microrod-modified GO ECL materials. The fabricated immunosensor also showed good feasibility in human serum samples.

Enhanced electrochemiluminescence ratiometric cytosensing based on surface plasmon resonance of Au nanoparticles and nanosucculent films

Ramos cells are human Burkitt's lymphoma cells, which are a kind of cancer cells to facilitate the monitoring of the relevant biological processes of cancers. Sensitive and accurate detection of Ramos cells using emerging ratiometric ECL biosensing technology shows increasing importance, however, the target analytes of current ratiometric ECL biosensors are mainly limited to DNA/RNA or proteins. In this study, we proposed a dual-potential ratiometric sensing strategy for the electrochemiluminescence detection of Ramos cells based on two types of electrochemiluminescence (ECL)-responding molecular. Au nanosucculent films (AuNFs) were electrodeposited on the fluorine doped tin oxide (FTO) electrode to increase the effective area of the electrode for more efficient assembly of DNA and effectively improving the conductivity of the sensing interfaces. In the presence of Ramos cells, aptamers capped with Au@luminol would conjugate with Ramos cells and then remove from AuNFs, accompanying the decrease of ECL signal from Au@luminol. Then, Au-DNA was captured and alternately hybridized with DNA-modified CdS nanocrystals (NCs) on the surface of AuNFs with the formation of a super reticulate structure. The reticulate structure not only raised another identified ECL signal from CdS NCs but also greatly promoted its ECL intensity from the surface plasmon resonance originating from Au NPs. The value of log (ECL_CdS/ECL_luminol) and the logarithm of the number of cells exhibit considerable linear relation ranging from 80 to 8 × 10⁵ cells mL^-1 with a low detection limit of 20 cells mL^-1 (S/N = 3). The selectivity and specificity of this dual-potential ECL sensor showed good performance and indicated considerable promise in avoiding false-positive results in detection.

Application of tetrahedral -deoxyribonucleic acid electrochemistry platform coupling aptazymes and hybridized hairpin reactions for the measurement of extracellular adenosine triphosphate in plants

Extracellular ATP (eATP) is an important biological signal transduction molecule. Although a variety of detection methods have been extensively used in ATP sensing and analysis, accurate detection of eATP remains difficult due to its extremely low concentration and spatiotemporal distribution. Here, an eATP measurement strategy based on tetrahedral DNA (T-DNA)-modified electrode sensing platform and hybridization chain reaction (HCR) combined with G-quadruplex/Hemin (G4/Hemin) DNAzyme dual signal amplification is proposed. In this strategy, ATP aptamer and RNA-cleaving DNAzyme were combined to form a split aptazyme. In the presence of ATP, this aptazyme hydrolyzes the cleaving substrate strand with high selectivity, releasing cleaved ssDNA, which are captured by the T-DNA assembled on the electrode surface, triggering an HCR on the electrode surface to form numerous linker sequences of the HCR dsDNA product. When G-quadruplex@AuNPs (G4) spherical nucleic acid enzymes (SNAzymes) with other linkers are used as nanocatalyst tags, they are captured by HCR dsDNA through sticky linkers present on the electrode surface. An amplified electrochemical redox current signal is generated through SNAzyme-mediated catalysis of H₂O₂, enabling easy detection of picomole amounts of ATP. Using this strategy, eATP levels released by tobacco suspension cells were accurately measured and the distribution and concentration of eATP released on the surface of an Arabidopsis leaf was determined.

Ultrasensitive bioassaying of HER-2 protein for diagnosis of breast cancer using reduced graphene oxide/chitosan as nanobiocompatible platform

Background

In this label-free bioassay, an electrochemiluminescence (ECL) immunosensor was developed for the quantification of breast cancer using HER-2 protein as a metastatic biomarker.

Method

For this purpose, the ECL emitter, [Ru(bpy)3]2+, was embedded into biocompatible chitosan (CS) polymer. The prepared bio-composite offered high ECL reading due to the depletion of human epidermal growth factor receptor 2 (HER-2) protein. Reduced graphene oxide (rGO) was used as substrate to increase signal stability and achieve greater sensitivity. For this, rGO was initially placed electrochemically on the glassy carbon electrode (GCE) surface by cyclic voltammetry (CV) technique. Next, the prepared CS/[Ru(bpy)3]2+ biopolymer solution was coated on a drop of the modified electrode such that the amine groups of CS and the carboxylic groups of rGO could covalently interact. Using EDC/NHS chemistry, monoclonal antibodies (Abs) of HER-2 were linked to CS/[Ru(bpy)3]2+/rGO/GCE via amide bonds between the carboxylic groups of Ab molecules and amine groups of CS. The electrochemical behavior of the electrode was studied using different electrochemical techniques such as electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV) and square wave voltammetry (SWV) and also ECL tests.

Results

After passing all optimization steps, the lower limit of detection (LLOQ) and linear dynamic range (LDR) of HER-2 protein were practically obtained as 1 fM and 1 fM to 1 nM, individually. Importantly, the within and between laboratory precisions were performed and the suitable relative standard deviations (RSDs) were recorded as 3.1 and 3.5%, respectively.

Conclusions

As a proof of concept, the designed immunosensor was desirably applied for the quantification of HER-2 protein in breast cancer suffering patients. As a result, the designed ECL-based immunosensor has the capability of being used as a conventional test method in biomedical laboratories for early detection of HER-2 protein in biological fluids.

Graphic Abstract

Superior sponge-like carbon self-doping graphitic carbon nitride nanosheets derived from supramolecular pre-assembly of a melamine-cyanuric acid complex for photocatalytic H2 evolution

The photocatalytic evolution of hydrogen (H₂) from water splitting is considered a promising route to overcome the energy crisis, and the key lies in the preparation of efficient photocatalysts. Herein, superior ordered sponge-like carbon self-doped graphitic carbon nitride (g-C₃N₄) nanosheets (SCCNS) were prepared via a combined strategy of melamine-cyanuric acid complex supramolecular pre-assembly and solvothermal pre-treatment using ethylene glycol (EG) aqueous solutions (EG:water = 50:50 vol.%) as a solvent and carbon doping source. The following pyrolysis converts the naturally arranged melamine-EG-cyanuric acid supramolecular intermediates to highly crystalline SCCNS with large specific surface areas. The optimal SCCNS-180 exhibits superior photocatalytic H₂ evolution activities (∼4393 and 11 320 μmol h^-1 g^-1) when irradiated with visible light and simulated sunlight; these values are up to ∼17- and ∼18-fold higher than that of bulk g-C₃N₄. The quantum efficiency of SCCNS-180 at λ = 420 nm can reach 6.0%. The excellent photocatalytic performance of SCCNS-180 derives from its distinct ordered sponge-like nanosheet structure with highly crystallinity and the carbon doping, leading to its improved optical absorption, accelerated photoinduced electron-hole pair transfer and separation rate and enlarged specific surface area (134.4 m² g^-1).

Two-Dimensional Metalloporphyrinic Framework Nanosheet-Based Dual-Mechanism-Driven Ratiometric Electrochemiluminescent Biosensing of Protein Kinase Activity

A dual-mechanism-driven ratiometric electrochemiluminescent (ECL) biosensor was developed for the ultrasensitive detection of protein kinase activity, which was based on a competitive catalytic reaction and resonance energy transfer (RET) by assembling gold nanoparticles (GNPs) on two-dimensional (2D) porphyrinic metal-organic framework (MOF) nanosheets. In this work, an ECL catalytic reaction competing for dissolved O₂ proceeded between 2D copper-based zinc porphyrinic MOF (Cu-TCPP(Zn)) nanosheets and luminol. Meanwhile, the cathodic ECL of singlet oxygen (¹O₂), derived from the electrocatalytic reaction of 2D Cu-TCPP(Zn), would be reduced by the assembled GNPs due to RET, while the anodic emission of luminol could be enhanced by GNPs with excellent electrocatalytic activity. With the detection of protein kinase A (PKA) as an example, this dual-mechanism-driven ECL biosensor exhibited a broad linear range (0.005-5.0 U mL^-1) and a sensitive detection limit (0.0037 U mL^-1). Compared with the traditional single-mechanism-driven sensing strategies, the developed dual-mechanism-driven ratiometric ECL biosensor may provide an effective method for the design of green and ultrasensitive ECL sensors.

Nitrogen Vacancy Engineering in Graphitic Carbon Nitride for Strong, Stable, and Wavelength Tunable Electrochemiluminescence Emissions

As an attractive electrochemiluminescence (ECL) emitter, graphitic carbon nitride (CN) still suffers from weak and unstable ECL signals for its poor conductivity and the occurrence of electrode passivation. In this study, a simple nitrogen vacancy (NV) engineering strategy has been developed for the improvement of ECL performances (intensity and stability) for the first time. In comparison to pristine CN (RSD = 51.98% for 10 continuous scan), ca. 60 times amplification in ECL intensity and 70 times enhancement in ECL efficiency for CN modified with NVs (CN-NVs) were obtained. In addition, more stable ECL emissions (RSD = 0.53%) were achieved for CN-NV-550 by thermal treatment of pristine CN in a N₂ atmosphere for another 2 h at 550 °C. The mechanism study for the vital role of NVs on the ECL of CN-NVs revealed that NVs can not only facilitate electron transfer to amplify the ECL intensity but also serve as the electron trap to inhibit electrode passivation. More interestingly, a series of CN-NVs exhibited a tunable ECL wavelength range from 470 to 516 nm with different NV contents. Moreover, their ECL spectra showed an obvious red-shift of the wavelength with their corresponding fluorescence spectra. These findings confirmed that the ECL emissions of CN-NVs were susceptible to the relevant surface states of NVs. Our work may open up a promising pathway for improving ECL performances of CN and create new possibilities for multitarget simultaneous detection based on ECL and construction of color tunable light-emitting devices.

Sensitive and Programmable "Signal-Off" Electrochemiluminescence Sensing Platform Based on Cascade Amplification and Multiple Quenching Mechanisms

A versatile and sensitive quantum dot (QD)-based "signal-off" electrochemiluminescence (ECL) sensing system was constructed using target-initiated dual Mg²⁺-dependent DNAzyme (MNAzyme) recycling and catalytic hairpin assembly (CHA) amplification strategies. After the cascade amplification, numerous ferrocene-labeled Y-shaped DNA complexes generated on the QD-modified electrode surface. In the presence of hemin, moreover, the terminal sequence of the formed complex could assemble into hemin/G-quadruplex. Therefore, the highly efficient ECL quenching was achieved due to the multiple quenching mechanisms, including electron/energy transfer between ferrocene and QDs, the steric hindrance effects, and the horseradish peroxidase-mimicking activity of hemin/G-quadruplex. Furthermore, owing to the flexibility in regulating the recognition sequences of MNAzyme, the assaying targets can be programmed. Based on the cascade amplification and multiple ECL quenching mechanisms, the developed programmable "signal-off" ECL sensing platform demonstrates excellent sensitivity and the detection limits of 35.00 aM, 3.71 fM, and 0.28 pM (S/N = 3) for target DNA, aptamer substrate (ATP as a model), and ion (Ag⁺ as a model), respectively.

C2N: A Class of Covalent Frameworks with Unique Properties

C2N is a unique member of the CnNm family (carbon nitrides), i.e., having a covalent structure that is ideally composed of carbon and nitrogen with only 33 mol% of nitrogen. C2N, with a stable composition, can easily be prepared using a number of precursors. Moreover, it is currently gaining extensive interest owing to its high polarity and good thermal and chemical stability, complementing carbon as well as classical carbon nitride (C3N4) in various applications, such as catalysis, environmental science, energy storage, and biotechnology. In this review, a comprehensive overview on C2N is provided; starting with its preparation methods, followed by a fundamental understanding of structure-property relationships, and finally introducing its application in gas sorption and separation technologies, as supercapacitor and battery electrodes, and in catalytic and biological processes. The review with an outlook on current research questions and future possibilities and extensions based on these material concepts is ended.