Twin Crystal Induced near Zero Thermal Expansion in SnO2 Nanowires

Highly Efficient Wide Bandgap Perovskite Solar Cells With Tunneling Junction by Self-Assembled 2D Dielectric Layer

Reducing non-radiative recombination and addressing band alignment mismatches at interfaces remain major challenges in achieving high-performance wide-bandgap perovskite solar cells. This study proposes the self-organization of a thin two-dimensional (2D) perovskite BA2PbBr4 layer beneath a wide-bandgap three-dimensional (3D) perovskite Cs0.17FA0.83Pb(I0.6Br0.4)3, forming a 2D/3D bilayer structure on a tin oxide (SnO2) layer. This process is driven by interactions between the oxygen vacancies on the SnO2 surface and hydrogen atoms of the n-butylammonium cation, aiding the self-assembly of the BA2PbBr4 2D layer. The 2D perovskite acts as a tunneling layer between SnO2 and the 3D perovskite, neutralizing the energy level mismatch and reducing non-radiative recombination. This results in high power conversion efficiencies of 21.54% and 19.16% for wide-bandgap perovskite solar cells with bandgaps of 1.7 and 1.8 eV, with open-circuit voltages over 1.3 V under 1-Sun illumination. Furthermore, an impressive efficiency of over 43% is achieved under indoor conditions, specifically under 200 lux white light-emitting diode light, yielding an output voltage exceeding 1 V. The device also demonstrates enhanced stability, lasting up to 1,200 hours.

Vacancy-Rich SnO2 Quantum Dot Stabilized by Polyoxomolybdate as Electrocatalyst for Selective NH3 Production

The pronounced conductivity of tin dioxide (SnO2) nanoparticles makes it an ideal multifunctional electrode material, while the challenge is to stabilize the quantum dot (QD) SnO2 nanocore in water. An Anderson-type polyoxomolybdate, (NH4)6[Mo7O24], is employed as an inorganic ligand to stabilize a ca. 6 nm SnO2 QD (Mox@SnO2). X-ray scattering and diffraction studies confirm the tetragonal SnO2 nanocore in Mox@SnO2. Elemental analyses are in good agreement with the mass spectrometric detection of the [Mo7O24]6- cluster present in Mox@SnO2. The ionic POMs attached to the SnO2 surface through [Mo-O-Sn] covalent linkages have been established by surface zeta potential, shift of the [Mo = O]t Raman vibration, and extended X-ray absorption fine structure (EXAFS) analyses. The presence of the [Mo7O24]6- cluster in the Mox@SnO2 is responsible for the remarkable aqueous stability of Mox@SnO2 in the pH range of 3-9. Dominant oxygen vacancy in the SnO2 core, identified by EXAFS data and the anisotropic electron paramagnetic resonance (EPR) signals (g ∼ 2.4 and 1.9), results in facile electronic conduction in Mox@SnO2 while being deposited on the electrode surface. Mox@SnO2 acts as an active catalyst for the electrocatalytic nitrate reduction (eNOR) to ammonia with 94% faradaic efficiency (FE) at -0.2 V vs RHE and a yield rate of 28.9 mg h-1 cm-2. The stability of Mox@SnO2 in acidic pH provides scope to reuse the Mox@SnO2 electrode at least four times with notable NH3 selectivity and a superior production rate (239.06 mmol g-1(cat) h-1). This study demonstrates the essential role of POM in stabilizing SnO2 QD, harnessing its electrochemical activity toward electrocatalytic ammonia production.

Localized Oxidation Embellishing Strategy Enables High-Performance Perovskite Solar Cells

Perovskite solar cell (pero-SC) has attracted extensive studies as a promising photovoltaic technology, wherein the electron extraction and transfer exhibit pivotal effect to the device performance. The planar SnO2 electron transport layer (ETL) has contributed the recent record power conversion efficiency (PCE) of the pero-SCs, yet still suffers from surface defects of SnO2 nanoparticles which brings energy loss and phase instability. Herein, we report a localized oxidation embellishing (LOE) strategy by applying (NH4 )2 CrO4 on the SnO2 ETL. The LOE strategy builds up plentiful nano-heterojunctions of p-Cr2 O3 /n-SnO2 and the nano-heterojunctions compensate the surface defects and realize benign energy alignment, which reduces surface non-radiative recombination and voltage loss of the pero-SCs. Meanwhile, the decrease of lattice mismatch released the lattice distortion and eliminated tensile stress, contributing to better stability of the devices. The pero-SCs based on α-FAPbI3 with the SnO2 ETL treated by the LOE strategy realized a PCE of 25.72 % (certified as 25.41 %), along with eminent stability performance of T90 >700 h. This work provides a brand-new view for defect modification of SnO2 electron transport layer.

Colossal negative thermal expansion in a cucurbit[8]uril-enabled uranyl-organic polythreading framework via thermally induced relaxation

It is an ongoing goal to achieve the effective regulation of the thermal expansion properties of materials. In this work, we propose a method for incorporating host-guest complexation into a framework structure and construct a flexible cucurbit[8]uril uranyl-organic polythreading framework, U₃(bcbpy)₃(CB8). U₃(bcbpy)₃(CB8) can undergo huge negative thermal expansion (NTE) and has a large volumetric coefficient of -962.9 × 10^-6 K^-1 within the temperature range of 260 K to 300 K. Crystallographic snapshots of the polythreading framework at various temperatures reveal that, different from the intrinsic transverse vibrations of the subunits of metal-organic frameworks (MOFs) that experience NTE via a well-known hinging model, the remarkable NTE effect observed here is the result of a newly-proposed thermally induced relaxation process. During this process, an extreme spring-like contraction of the flexible CB8-based pseudorotaxane units, with an onset temperature of ∼260 K, follows a period of cumulative expansion. More interestingly, compared with MOFs that commonly have relatively strong coordination bonds, due to the difference in the structural flexibility and adaptivity of the weakly bonded U₃(bcbpy)₃(CB8) polythreading framework, U₃(bcbpy)₃(CB8) shows unique time-dependent structural dynamics related to the relaxation process, the first time this has been reported in NTE materials. This work provides a feasible pathway for exploring new NTE mechanisms by using tailored supramolecular host-guest complexes with high structural flexibility and has promise for the design of new kinds of functional metal-organic materials with controllable thermal responsive behaviour.

Significant Zero Thermal Expansion Via Enhanced Magnetoelastic Coupling in Kagome Magnets

Zero-thermal-expansion (ZTE) alloys, as dimensionally stable materials, are urgently required in many fields, particularly in highly advanced modern industries. In this study, high-performance ZTE with a negligible coefficient of thermal expansion a_v as small as 2.4 ppm K^-1 in a broad temperature range of 85-245 K is discovered in Hf_0.85 Ta_0.15 Fe₂ C_0.01 magnet. It is demonstrated that the addition of trace interstitial atom C into Ta-substituted Hf_0.85 Ta_0.15 Fe₂ exhibits significant capability to tune the normal positive thermal expansion into high-performance ZTE via enhanced magnetoelastic coupling in stabilized ferromagnetic structure. Moreover, direct observation of the magnetic transition between ferromagnetic and triangular antiferromagnetic states via Lorentz transmission electron microscopy, along with corresponding theoretical calculations, further uncovers the manipulation mechanism of ZTE and negative thermal expansion. A convenient and effective method to optimize thermal expansion and achieve ZTE with interstitial C addition may result in broadened applications based on the strong correlation between the magnetic properties and crystal structure.

Effects of Grain Refinement and Thermal Aging on Atomic Scale Local Structures of Ultra-Fine Explosives by X-ray Total Scattering

The atomic scale local structures affect the initiation performance of ultra-fine explosives according to the stimulation results of hot spot formation. However, the experimental characterization of local structures in ultra-fine explosives has been rarely reported, due to the difficulty in application of characterization methods having both high resolution in and small damage to unstable organic explosive materials. In this work, X-ray total scattering was explored to investigate the atomic scale local distortion of two widely applicable ultra-fine explosives, LLM-105 and HNS. The experimental spectra of atomic pair distribution function (PDF) derived from scattering results were fitted by assuming rigid ring structures in molecules. The effects of grain refinement and thermal aging on the atomic scale local structure were investigated, and the changes in both the length of covalent bonds have been identified. Results indicate that by decreasing the particle size of LLM-105 and HNS from hundreds of microns to hundreds of nanometers, the crystal structures remain, whereas the molecular configuration slightly changes and the degree of structural disorder increases. For example, the average length of covalent bonds in LLM-105 reduces from 1.25 Å to 1.15 Å, whereas that in HNS increases from 1.25 Å to 1.30 Å, which is possibly related to the incomplete crystallization process and internal stress. After thermal aging of ultra-fine LLM-105 and HNS, the degree of structural disorder decreases, and the distortion in molecules formed in the synthesis process gradually healed. The average length of covalent bonds in LLM-105 increases from 1.15 Å to 1.27 Å, whereas that in HNS reduces from 1.30 Å to 1.20 Å. The possible reason is that the atomic vibration in the molecule intensifies during the heat aging treatment, and the internal stress was released through changes in molecular configuration, and thus the atomic scale distortion gradually heals. The characterization method and findings in local structures obtained in this work may pave the path to deeply understand the relationship between the defects and performance of ultra-fine explosives.

Integration of negative, zero and positive linear thermal expansion makes borate optical crystals light transmission temperature-independent

Negative and zero thermal expansion (NTE and ZTE) materials are widely adopted to eliminate the harmful effect from the "heat expansion and cool contraction" effect and frequently embrace novel fundamental physicochemical mechanisms. To date, the manipulation of NTE and ZTE materials has mainly been realized by chemical component regulation. Here, we propose another method by making use of the anisotropy of thermal expansion in noncubic single crystals, with maximal tunability from the integration of linear NTE, ZTE and positive thermal expansion (PTE). We demonstrate this concept in borate optical crystals of AEB₂O₄ (AE = Ca or Sr) to make the light transmission temperature-independent by counterbalancing the thermal expansion and thermo-optics coefficient. We further reveal that such a unique thermal expansion behavior in AEB₂O₄ arises from the synergetic thermal excitation of bond stretching in ionic [AEO₈] and rotation between covalent [BO₃] groups. This work has significant implications for understanding the thermal excitation of lattice vibrations in crystals and promoting the functionalization of anomalous thermal expansion materials.

Chemical Diversity for Tailoring Negative Thermal Expansion

Negative thermal expansion (NTE), referring to the lattice contraction upon heating, has been an attractive topic of solid-state chemistry and functional materials. The response of a lattice to the temperature field is deeply rooted in its structural features and is inseparable from the physical properties. For the past 30 years, great efforts have been made to search for NTE compounds and control NTE performance. The demands of different applications give rise to the prominent development of new NTE systems covering multifarious chemical substances and many preparation routes. Even so, the intelligent design of NTE structures and efficient tailoring for lattice thermal expansion are still challenging. However, the diverse chemical routes to synthesize target compounds with featured structures provide a large number of strategies to achieve the desirable NTE behaviors with related properties. The chemical diversity is reflected in the wide regulating scale, flexible ways of introduction, and abundant structure-function insights. It inspires the rapid growth of new functional NTE compounds and understanding of the physical origins. In this review, we provide a systematic overview of the recent progress of chemical diversity in the tailoring of NTE. The efficient control of lattice and deep structural deciphering are carefully discussed. This comprehensive summary and perspective for chemical diversity are helpful to promote the creation of functional zero-thermal-expansion (ZTE) compounds and the practical utilization of NTE.

Bi0.33Zr2(PO4)3, a negative thermal expansion material with a Nasicon-type structure

A new negative thermal expansion ceramic material, Bi0.33Zr2(PO4)3, with a sodium zirconium phosphate structure, has been investigated and the results are presented.

Differences in thermal expansion and motion ability for herringbone and face-to-face π-stacked solids

A series of aromatic organic molecules functionalized with different halogen atoms (I/ Br), motion-capable groups (olefin, azo or imine) and molecular length were designed and synthesized. The molecules self-assemble in the solid state through halogen bonding and exhibit molecular packing sustained by either herringbone or face-to-face π-stacking, two common motifs in organic semiconductor molecules. Interestingly, dynamic pedal motion is only achieved in solids with herringbone packing. On average, solids with herringbone packing exhibit larger thermal expansion within the halogen-bonded sheets due to motion occurrence and molecular twisting, whereas molecules with face-to-face π-stacking do not undergo motion or twisting. Thermal expansion along the π-stacked direction is surprisingly similar, but slightly larger for the face-to-face π-stacked solids due to larger changes in π-stacking distances with temperature changes. The results speak to the importance of crystal packing and intermolecular interaction strength when designing aromatic-based solids for organic electronics applications.

Spontaneous Strain Buffer Enables Superior Cycling Stability in Single-Crystal Nickel-Rich NCM Cathode

The capacity degredation in layered Ni-rich LiNi_xCo_yMn_zO₂ (x ≥ 0.8) cathode largely originated from drastic surface reactions and intergranular cracks in polycrystalline particles. Herein, we report a highly stable single-crystal LiNi_0.83Co_0.12Mn_0.05O₂ cathode material, which can deliver a high specific capacity (∼209 mAh g^-1 at 0.1 C, 2.8-4.3 V) and meanwhile display excellent cycling stability (>96% retention for 100 cycles and >93% for 200 cycles). By a combination of in situ X-ray diffraction and in situ pair distribution function analysis, an intermediate monoclinic distortion and irregular H3 stack are revealed in the single crystals upon charging-discharging processes. These structural changes might be driven by unique Li-intercalation kinetics in single crystals, which enables an additional strain buffer to reduce the cracks and thereby ensure the high cycling stability.

Twinning-mediated anomalous alignment of rutile films revealed by synchrotron X-ray nanodiffraction

Nanotwin structures in materials engender fascinating exotic properties. However, twinning usually alter the crystal orientation, resulting in random orientation and limited performances. Here, we report a well-aligned rutile TiO₂ nanotwin film with superior preferential orientation than its isostructural substrate. By means of the synchrotron X-ray Laue nanodiffraction technique, the crystal orientation, twin boundaries, and deviatoric stresses of the film were quantitatively imaged at unprecedented spatial resolution to unravel the underlying mechanism of this anomalous alignment. Massive {101}-type rutile nanotwins were observed, and a crystallographic relationship of the heteroepitaxy was proposed. The rapid twinning and twin-controlled heteroepitaxy are responsible for the texture improvement. This work would open up opportunities for rational design of better twin-based functional materials, and implies the powerful capabilities of X-ray nanodiffraction technique for multidisciplinary applications.

•

Nanotwinned TiO₂ film possesses stronger preferred orientation than its FTO substrate

•

State-of-the-art nanoscanned X-ray Laue diffraction is used to unveil the mechanism

•

Twinning-mediated heteroepitaxy mainly leads to the texture improvement

•

This work helps to stimulate the rational design and synthesis of nanotwin materials

Bridging Structural Inhomogeneity to Functionality: Pair Distribution Function Methods for Functional Materials Development

The correlation between structure and function lies at the heart of materials science and engineering. Especially, modern functional materials usually contain inhomogeneities at an atomic level, endowing them with interesting properties regarding electrons, phonons, and magnetic moments. Over the past few decades, many of the key developments in functional materials have been driven by the rapid advances in short-range crystallographic techniques. Among them, pair distribution function (PDF) technique, capable of utilizing the entire Bragg and diffuse scattering signals, stands out as a powerful tool for detecting local structure away from average. With the advent of synchrotron X-rays, spallation neutrons, and advanced computing power, the PDF can quantitatively encode a local structure and in turn guide atomic-scale engineering in the functional materials. Here, the PDF investigations in a range of functional materials are reviewed, including ferroelectrics/thermoelectrics, colossal magnetoresistance (CMR) magnets, high-temperature superconductors (HTSC), quantum dots (QDs), nano-catalysts, and energy storage materials, where the links between functions and structural inhomogeneities are prominent. For each application, a brief description of the structure-function coupling will be given, followed by selected cases of PDF investigations. Before that, an overview of the theory, methodology, and unique power of the PDF method will be also presented.

Intrinsic Isotropic Near-Zero Thermal Expansion in Zn4B6O12X (X = O, S, Se)

Zero thermal expansion (ZTE) materials, keeping size constant as temperature varies, are valuable for resisting the deterioration of the performance from environmental temperature fluctuation, but they are rarely discovered due to the counterintuitive temperature-size effect. Herein, we demonstrate that a family of borates with sodalite cage structure, Zn₄B₆O₁₂X (X = O, S, Se), exhibits intrinsic isotropic near-ZTE behaviors from 5 to 300 K. The very low thermal expansion is mainly owing to the coupling rotation of [BO₄] rigid groups constrained by the bonds between Zn and cage-edged O atoms, while the central atoms in the cage have a negligible contribution. Our study has significant implications on the understanding of the ZTE mechanism and exploration of new ZTE materials.

Negative Thermal Expansion in Nanosolids

Nanosolids usually exhibit a variety of peculiar physical features due to the size effect. The unique surface electronic states and coordination structures of nanosolids make them particularly important as promising functional materials. After several decades of research effort on the preparation processes and formation mechanisms of nanomaterials, the attention of nanoscience has been shifted to their functionalization and utilization. In the development of nanodevices, the thermal expansion matching between nanosized components is becoming increasingly important for the selection of units and design of nanodevices. In nanosolids, particularities of bonding features and coordination environments lead to size-dependent thermal expansion behavior that is significantly different from the behavior of their bulk counterparts. Thus, size tuning becomes one of the most efficient techniques in tailoring lattice thermal expansion. Unlike the traditional tailoring methods like chemical doping, the modification of chemical bonds and lattice vibration modes mainly contributing to the abnormal thermal expansion of nanosolids can be realized by adjustment of local coordination on the surface and surface/interface lattice strain. With the introduction of the nanosizing effect, the functional properties of nanosolids can be thoroughly remolded, which provides a huge space for functional applications of negative thermal expansion (NTE) nanosolids. However, understanding the origin of novel thermal expansion in nanosolids remains a challenging issue because of the lack of knowledge of precise atomic arrangements at both long-range and local structure levels. In this Account, by virtue of various advanced characterization techniques, we provide a comprehensive understanding at the atomic level of the abnormal thermal expansion behaviors in nanosized PbTiO₃-based compounds, oxides, fluorides, and bimetallic alloys. Our results demonstrate that nanoscale structural features can be used to alter the spontaneous polarization, surficial/interfacial coordination, local lattice symmetry, and elemental distribution, resulting in the crossover of thermal expansion from the bulk and the generation of zero thermal expansion (ZTE). Furthermore, structural peculiarities in nanosolids, e.g., the lack of long-range coherence, abnormal surficial/interfacial bonding, lattice imperfection, and distribution of local phases, open the door for local-scale manipulations of the physical properties of electronic structure and lattice vibration during adjustment of thermal expansion. For the development of nanodevices with high thermostability, atomic-level information on the nanostructure thermal evolution provides a guideline for intelligent designs of the functional components and matrix. Understanding of the structural transformation in nanosolids will help future exploration of functional nanomaterials based on short-range atomistic design and optimization.

Origin of structural stability of ScH3 molecular nanowires and their chemical-bonding behavior: Correlation effects of the Sc 3d electrons

A new stable transition-metal trihydride (ScH₃) molecular nanowire was recently reported by Li et al. [J. Am. Chem. Soc. 139, 6290-6293 (2017)]. Of the two typical structures (T-ScH₃ and O-ScH₃), T-ScH₃ is more stable than O-ScH₃. However, the reason why O-ScH₃ is less stable than T-ScH₃ was not known. Using Perdew-Burke-Ernzerhof (PBE), PBE+U, SCAN, and HSE06, as well as crystal orbital Hamilton populations (COHPs), we investigate the orbital-projected band structures and chemical bonding of T-ScH₃ and O-ScH₃. It is found that the energies calculated by PBE, SCAN, and HSE06 indeed reveal that T-ScH₃ is more stable than O-ScH₃, and there is no occupied antibonding state at the Fermi level of the COHP curves of T-ScH₃, supporting the stable Sc-H bonding of T-ScH₃. To the contrary, the Sc-H bonding of O-ScH₃ is unstable because there exist occupied antibonding states at the Fermi level of the COHP curves of O-ScH₃. We found that the results of PBE+U are consistent with those of PBE, SCAN, and HSE06 in the case of U < U_c. However, when U > U_c, the results of PBE+U are opposite to those of PBE, SCAN, and HSE06.

Intrinsic zero thermal expansion in cube cyanurate K6Cd3(C3N3O3)4

The novel cubic cyanurate K₆Cd₃(C₃N₃O₃)₄ exhibits zero thermal expansion behavior with a very low thermal expansion coefficient of 0.06 MK⁻¹ in a broad temperature range from 10 to 130 K.