Controlled Tuning of the Properties in Optoelectronic Self-Sorted Gels

Nanoscale assembly of enantiomeric supramolecular gels driven by the nature of solvents

Understanding the key parameters that control the self-assembly process is critical to predict self-assembly modes in multi-component systems, which will lead to the development of nanofibrous materials with tuneable properties. Enantiomeric amino acid-based low-molecular-weight gelators (LMWGs) were mixed in polar (polar protic) and aromatic apolar (aromatic) solvents and compared to their individual counterparts to probe the effect of solvent polarity on the self-assembly process. Scanning electron microscopy (SEM) reveals that xerogels of individual components display hollow needles in polar protic solvents, while chiral coils are observed in aromatic solvents. In contrast, the multi-component gel displays hollow needle morphologies in both solvents, indicating similar morphologies in polar protic solvents but an entirely different nanostructure for the individual gel networks in aromatic solvents. PXRD experiments performed on the dried gels showed that the nature of the solvents plays a vital role in the co-assembly process of multi-component gels. The self-assembly modes and the gel state structure of the gels are analysed by wide-angle X-ray diffraction (WAXS) and small-angle neutron diffraction (SANS), which reveals that the mixed gel undergoes different co-assembly modes depending on the nature of the solvent systems. This study shows that different co-assembly modes can be achieved for structurally similar components by varying the solvent polarity, demonstrating the importance of solvent choice in the self-assembly process of multi-component gels.

Development of Low-Molecular-Weight Gelator/Polymer Composite Materials Utilizing the Gelation and Swelling Process of Polymeric Materials

The creation of polymer composite materials by compositing fillers into polymer materials is an effective method of improving the properties of polymer materials, and the development of new fillers and their novel composite methods is expected to lead to the creation of new polymer composite materials. In this study, we develop a new filler material made of low-molecular-weight gelators by applying a gelation process that simultaneously performs the swelling (gelation) of crosslinked polymer materials and the self-assembly of low-molecular-weight gelators into low-dimensional crystals in organic solvents within polymer materials. The gelation process of crosslinking rubber-based polymers using alkylhydrazides/toluene as the low-molecular-weight gelator allowed us to composite self-assembled sheet-like crystals of alkylhydrazides as fillers in polymeric materials, as suggested by various microscopic observations, including infrared absorption measurements, small-angle X-ray diffraction measurements and thermal analysis, microscopy, and infrared absorption measurements. Furthermore, tensile tests of the composite materials demonstrated that the presence of fillers improved both the Young's modulus and the tensile strength, as well as the elongation at yield. Additionally, heat treatment was shown to facilitate filler dispersion and enhance the mechanical properties. The findings demonstrate the potential of self-assembled sheet-like crystals of low-molecular-weight gelators as novel filler materials for polymers. The study's composite method utilizing gelators via gelation proved effective.

Understanding multicomponent low molecular weight gels from gelators to networks

BACKGROUND

The construction of gels from low molecular weight gelators (LMWG) has been extensively studied in the fields of bio-nanotechnology and other fields. However, the understanding gaps still prevent the prediction of LMWG from the full design of those gel systems. Gels with multicomponent become even more complicated because of the multiple interference effects coexist in the composite gel systems.

AIM OF REVIEW

This review emphasizes systems view on the understanding of multicomponent low molecular weight gels (MLMWGs), and summarizes recent progress on the construction of desired networks of MLMWGs, including self-sorting and co-assembly, as well as the challenges and approaches to understanding MLMWGs, with the hope that the opportunities from natural products and peptides can speed up the understanding process and close the gaps between the design and prediction of structures.

KEY SCIENTIFIC CONCEPTS OF REVIEW

This review is focused on three key concepts. Firstly, understanding the complicated multicomponent gels systems requires a systems perspective on MLMWGs. Secondly, several protocols can be applied to control self-sorting and co-assembly behaviors in those multicomponent gels system, including the certain complementary structures, chirality inducing and dynamic control. Thirdly, the discussion is anchored in challenges and strategies of understanding MLMWGs, and some examples are provided for the understanding of multicomponent gels constructed from small natural products and subtle designed short peptides.

Cell-Like Synthetic Supramolecular Soft Materials Realized in Multicomponent, Non-/Out-of-Equilibrium Dynamic Systems

Living cells are complex, nonequilibrium supramolecular systems capable of independently and/or cooperatively integrating multiple bio-supramolecules to execute intricate physiological functions that cannot be accomplished by individual biomolecules. These biological design strategies offer valuable insights for the development of synthetic supramolecular systems with spatially controlled hierarchical structures, which, importantly, exhibit cell-like responses and functions. The next grand challenge in supramolecular chemistry is to control the organization of multiple types of supramolecules in a single system, thus integrating the functions of these supramolecules in an orthogonal and/or cooperative manner. In this perspective, the recent progress in constructing multicomponent supramolecular soft materials through the hybridization of supramolecules, such as self-assembled nanofibers/gels and coacervates, with other functional molecules, including polymer gels and enzymes is highlighted. Moreover, results show that these materials exhibit bioinspired responses to stimuli, such as bidirectional rheological responses of supramolecular double-network hydrogels, temporal stimulus pattern-dependent responses of synthetic coacervates, and 3D hydrogel patterning in response to reaction-diffusion processes are presented. Autonomous active soft materials with cell-like responses and spatially controlled structures hold promise for diverse applications, including soft robotics with directional motion, point-of-care disease diagnosis, and tissue regeneration.

Development of Thixotropic Molecular Oleogels Comprising Alkylanilide Gelators by Using a Mixing Strategy

Molecular oleogels have the potential to be used as materials in healthcare applications. However, their design and synthesis are complex, thus requiring simple and effective methods for their preparation. This paper reports on alkylanilides that are low molecular-weight organogelators, which when appropriately mixed with different alkyl chain lengths could result in the formation of mixed molecular gels that exhibit excellent gel-forming ability and mechanical properties. In addition, the single and mixed molecular organogel systems were found to be applicable as single and mixed molecular oleogel systems capable of gelling oils such as olive oil and squalane. This has been found to be true, especially in molecular oleogel systems consisting of squalane, which is used as solvents in healthcare. The mixed squalene-molecular oleogel systems showed an increase in the critical (minimum) gelation concentration from 1.0 to 0.1 wt.% in the single system and an improvement in the thixotropic behavior recovery time. The thixotropic behavior of the molecular oleogels in the mixed system was quantitatively evaluated through dynamic viscoelasticity measurements; however, it was not observed for the single-system molecular oleogels. Scanning electron microscopy of the xerogels suggested that this behavior is related to the qualitative improvement of the network owing to the refinement of the mesh structure. These mixed molecular oleogels, composed of alkylanilides displaying such thixotropic behavior, could be used as candidates for ointment-base materials in the healthcare field.

Design Rules for Binary Bisamide Gelators: toward Gels with Tailor-Made Structures and Properties

This study intends to develop design rules for binary mixture of gelators that govern their assembly behavior and subsequently explore the impact of their supramolecular assembly patterns on the gels' rheological properties. To achieve these goals, nBA gelators with odd and even parities [n-methylene spacers between the amide groups (n = 5-10) and 17 carbons at each end] were blended at different ratios. Such bisamides with simple structures were selected to study because their different spacer lengths offer the possibility to have matching or non-matching hydrogen bonds. The results show that the assembly behavior of binary mixtures of bisamide gelators is the same in the solid and gel states. Binary mixtures of gelators, which only differ two methylene moieties in the spacer length, form compounds and co-assemble into fibers and sheets observed for (5BA)1(7BA)1 and (6BA)1(8BA)1 mixtures, respectively. Binary gelator mixtures of the same parity and a larger spacer length difference still lead to mixing for the odd parity couple (5BA)1(9BA)1), but to partial phase separation for the even parity mixture (6BA)1(10BA)1. Binary mixtures of gelators of different parities gave complete phase separation in the solid state, and self-sorted gels consisting of discrete fibers and sheets in the gels of (5BA)3(6BA)1 and (5BA)3(10BA)1. The even-even binary gels (20 wt %) consisting of co-assembled sheets show higher G' than odd-odd binary gels (20 wt %) consisting of co-assembled fibers. In general, the self-sorting of odd and even molecules into the separate primary structures results in a dramatic decrease of G' compared to the co-assembled gels (20 wt %), except for (5BA)1(9BA)1 gel (20 wt %). It might be due to larger woven spheres in (5BA)1(9BA)1 gel (20 wt %), which probably have a less entangled gel network.

The Role of Functional Groups in Tuning the Self-Assembly Modes and Physical Properties of Multicomponent Gels

We have analyzed the nature and role of functional groups on the self-assembly modes and the physical properties of multicomponent gels with structurally similar individual components. The gelation properties of individual and mixed enantiomeric compounds of biphenyl bis-(amides) of alanine (BPA) or phenylalanine (BPP) methyl ester were analyzed in various solvent/solvent mixtures. Multicomponent gels were formed by mixing the enantiomeric BPP compounds at a lower concentration, but a higher concentration was required for mixed alanine-based BPA gels. The comparison of the mechanical strength of the individual and mixed BPP compounds indicated that the mixed BPP gels displayed enhanced mechanical strength (∼2-fold increase) in p-xylene, but a weaker gel was observed in DMSO/water. However, a reverse trend was observed for BPA gels, indicating the role of functional groups in the gel network formation. X-ray diffraction analysis of the gelator and the xerogels in the solid state confirmed the formation of co-assembled networks in mixed enantiomeric gels. The stability of the gels towards anions was evaluated by analyzing the anion induced stimuli-responsive properties. These results indicate the effective modeling of the functional groups of the individual components could lead to multicomponent gels with tunable properties.

Photothermal Perylene Bisimide Hydrogels

Gels formed using a perylene bisimide (PBI) as a low molecular weight gelator can show the photothermal effect. Formation of the PBI radical anion results in new absorption bands forming, meaning that subsequent irradiation with a wavelength of light overlapping with the new absorption band leads to heating of the gel. This approach can be used to heat the gel, as well as the surrounding milieu. We show how we can use electrochemical methods as well as multicomponent systems to form the radical anion without the need for UV light, and how we can use the photothermal effect to induce phase transitions in the solutions above the gels by exploiting photothermal behavior.

Enzyme-Triggered l-α/d-Peptide Hydrogels as a Long-Acting Injectable Platform for Systemic Delivery of HIV/AIDS Drugs

Eradicating HIV/AIDS by 2030 is a central goal of the World Health Organization. Patient adherence to complicated dosage regimens remains a key barrier. There is a need for convenient long-acting formulations that deliver drugs over sustained periods. This paper presents an alternative platform, an injectable in situ forming hydrogel implant to deliver a model antiretroviral drug (zidovudine [AZT]) over 28 days. The formulation is a self-assembling ultrashort d or l-α peptide hydrogelator, namely phosphorylated (naphthalene-2-ly)-acetyl-diphenylalanine-lysine-tyrosine-OH (NapFFKY[p]-OH), covalently conjugated to zidovudine via an ester linkage. Rheological analysis demonstrates phosphatase enzyme instructed self-assembly, with hydrogels forming within minutes. Small angle neutron scattering data suggest hydrogels form narrow radius (≈2 nm), large length fibers closely fitting the flexible cylinder elliptical model. d-Peptides are particularly promising for long-acting delivery, displaying protease resistance for 28 days. Drug release, via hydrolysis of the ester linkage, progress under physiological conditions (37 °C, pH 7.4, H2 O). Subcutaneous administration of Napffk(AZT)Y[p]G-OH in Sprague Dawley rats demonstrate zidovudine blood plasma concentrations within the half maximal inhibitory concentration (IC50 ) range (30-130 ng mL-1 ) for 35 days. This work is a proof-of-concept for the development of a long-acting combined injectable in situ forming peptide hydrogel implant. These products are imperative given their potential impact on society.

Self-Sorting in Diastereomeric Mixtures of Functionalized Dipeptides

Self-sorting in functionalized dipeptide systems can be driven by the chirality of a single amino acid, both at a high pH in the micellar state and at a low pH in the gel state. The structures formed are affected to some degree by the relative concentrations of each component showing the complexity of such an approach. The structures underpinning the gel network are predefined by the micellar structures at a high pH. Here, we describe the systems prepared from two dipeptide-based gelators that differ only by the chirality of one of the amino acids. We provide firm evidence for self-sorting in the micellar and gel phases using small-angle neutron scattering and cryo-transmission electron microscopy (cryo-TEM), showing that complete self-sorting occurs across a range of relative concentrations.

Process Dependent Complexity in Multicomponent Gels

Mixing low molecular weight gelators (LMWGs) can be used to combine favorable properties of the individual components within a multifunctional gel. Such multicomponent systems are complex enough in themselves but the method of combining components is not commonly considered something to influence self-assembly. Herein, two multicomponent systems comprising of a naphthalene-based dipeptide hydrogelator and one of two modified naphthalene diimides (NDIs), one of which forms gels, and the other does not, are investigated. These systems are probed, examining the structures formed and their gel properties (when preparing a solution from either a mixed powder of both components or by mixing pre-formed solutions of each component) using rheology, small angle neutron scattering (SANS), and absorbance spectroscopy. It is found that by altering the method of preparation, it is can either induce self-sorting or co-assembly within the fibers formed that underpin the gel network.

Controlled Annealing in Adaptive Multicomponent Gels

We use a pH-driven annealing process to convert between co-assembled and self-sorted networks in multicomponent gels. The initially formed gels at low pH are co-assembled, with the two components coexisting within the same self-assembled structures. We use an enzymatic approach to increase the pH, resulting in a gel-to-sol transition, followed by a hydrolysis to lower the pH once again. As the pH decreases, a self-sorted network is formed by a two-stage gelation process determined by the pK_a of each component. This approach can be expanded to layered systems to generate many varied systems by changing composition and rates of pH change, adapting their microstructure and so allowing access to a far greater range of morphologies and complexity than can be achieved in single component systems.

Evolution of π-Peptide Self-Assembly: From Understanding to Prediction and Control

Supramolecular materials derived from the self-assembly of engineered molecules continue to garner tremendous scientific and technological interest. Recent innovations include the realization of nano- and mesoscale particles (0D), rods and fibrils (1D), sheets (2D), and even extended lattices (3D). Our research groups have focused attention over the past 15 years on one particular class of supramolecular materials derived from oligopeptides with embedded π-electron units, where the oligopeptides can be viewed as substituents or side chains to direct the assembly of the central π-electron cores. Upon assembly, the π-systems are driven into close cofacial architectures that facilitate a variety of energy migration processes within the nanomaterial volume, including exciton transport, voltage transmission, and photoinduced electron transfer. Like many practitioners of supramolecular materials science, many of our initial molecular designs were designed with substantial inspiration from biologically occurring self-assembly coupled with input from chemical intuition and molecular modeling and simulation. In this feature article, we summarize our current understanding of the π-peptide self-assembly process as documented through our body of publications in this area. We address fundamental spectroscopic and computational tools used to extract information regarding the internal structures and energetics of the π-peptide assemblies, and we address the current state of the art in terms of recent applications of data science tools in conjunction with high-throughput computational screening and experimental assays to guide the efficient traversal of the π-peptide molecular design space. The abstract image details our integrated program of chemical synthesis, spectroscopic and functional characterization, multiscale simulation, and machine learning which has advanced the understanding and control of the assembly of synthetic π-conjugated peptides into supramolecular nanostructures with energy and biomedical applications.

A supramolecular self-assembled nanomaterial for synergistic therapy of immunosuppressive tumor

Triple negative breast cancer (TNBC) is an immunosuppressive "cold" tumor that lacks immune cell infiltration and activation, resulting in a poor response to immune checkpoint blockade (ICB) therapies. In addition, TNBC is poorly responsive to targeted therapies due to the absence of efficient molecular targets. A strategy that can block molecular signal transduction, stimulate immunogenicity, and activate the immune response is a promising approach to achieve ideal clinical benefit. Herein, we designed and synthesized an aggregation-induced emission luminogen (AIEgen)-conjugated self-assembling peptide that targets epidermal growth factor receptor (EGFR), named TPA-FFG-LA. TPA-FFG-LA peptides form nanoassemblies on the surface of EGFR-positive TNBC cells and are internalized into cells through endocytosis, which inhibit EGFR signaling transduction and provoke lysosomal membrane permeabilization (LMP). Upon light irradiation, the aggregated AIEgens produce massive reactive oxygen species (ROS) to exacerbate LMP and trigger immunogenic cell death (ICD), resulting in elimination of residual EGFR-negative tumor cells and exerting long-term antitumor effects. The in vitro and in vivo experiments verified that TPA-FFG-LA nanoassemblies suppress tumor growth, provoke immune cell activation and infiltration, and cause EGFR degradation and LMP. These results suggest that the combination of supramolecular assembly induced molecular targeting effects and lysosome dysfunction with ICD-stimulated immune activation is a plausible strategy for the efficient therapy of immunosuppressive TNBC.

Investigating Aggregation Using In Situ Electrochemistry and Small-Angle Neutron Scattering

Using small-angle neutron scattering to investigate the aggregation of self-assembling molecules is well established. Some of these molecules are electrochemically useful, for example, in electrochromic devices. Electrochemistry can also be used in some cases to induce aggregation. Here, we describe an approach whereby electrochemistry can be directly carried out on a sample in the neutron beam, allowing us to monitor changes directly in situ. We exemplify with two examples but highlight that there are many other potential opportunities.

Narcissistic self-sorting of n-acene nano-ribbons yielding energy-transfer and electroluminescence at p-n junctions

The 2,3-didecyloxy derivative of an n-type anthracene (n-BG) and a p-type tetracene (p-R) have been synthesized and their self-assembly into nano-ribbons studied. Hyperspectral fluorescence imaging revealed their narcissistic self-sorting, leading to separated nanoribbons emitting with very different colors (blue or green for n-BG, depending on the growth solvent, and red for p-R). It is unique that the usual origins of self-sorting, such as specific H-bonding, different growth kinetics, or incompatible steric hindrance can be ruled out. Hence, the narcissistic behaviour is herein proposed to originate from a so-far unconsidered cause: the discrepancy between the quadrupolar character of n-BG and dipolar character of p-R. At the p-n junctions of these nanoribbons, inter-ribbon FRET and electro-luminescence switch-on were observed by fluorescence/luminescence microscopy.

Stearoylamido-D-Glucamine Hydrogelators for Thixotropic Molecular Gels with Tunable Softness by Chemical Modification

Low-molecular-weight hydrogelators containing stearoyl, glycine, and D-glucamine moieties with or without methyl groups were synthesized to prepare chemically tuned molecular hydrogels. To evaluate the role of hydrogen bonding of hydrogelators in molecular hydrogel formation, the author has newly synthesized hydrogelators with or without methyl groups at their N-H in amide groups, contributing to the hydrogen bond formation in fiber in molecular hydrogels. The obtained hydrogels exhibited improved thixotropic performance with tunable softness, exhibiting pseudo-reversible thixotropic cycles that depended on the methyl substitution positions in the hydrogelators. To change the hydrogen bonds' positions by chemical modification has made it possible to tune the mechanical properties of molecular gels.

In Situ Self-Sorting Peptide Assemblies in Living Cells for Simultaneous Organelle Targeting

Self-sorting is a common phenomenon in eukaryotic cells and represents one of the versatile strategies for the formation of advanced functional materials; however, developing artificial self-sorting assemblies within living cells remains challenging. Here, we report on the GSH-responsive in situ self-sorting peptide assemblies within cancer cells for simultaneous organelle targeting to promote combinatorial organelle dysfunction and thereby cell death. The self-sorting system was created via the design of two peptides E3C16E6 and EVM^SeO derived from lipid-inspired peptide interdigitating amphiphiles and peptide bola-amphiphiles, respectively. The distinct organization patterns of the two peptides facilitate their GSH-induced self-sorting into isolated nanofibrils as a result of cleavage of disulfide-connected hydrophilic domains or reduction of selenoxide groups. The GSH-responsive in situ self-sorting in the peptide assemblies within HeLa cells was directly characterized by super-resolution structured illumination microscopy. Incorporation of the thiol and ER-targeting groups into the self-sorted assemblies endows their simultaneous targeting of endoplasmic reticulum and Golgi apparatus, thus leading to combinatorial organelle dysfunction and cell death. Our results demonstrate the establishment of the in situ self-sorting peptide assemblies within living cells, thus providing a unique platform for drug targeting delivery and an alternative strategy for modulating biological processes in the future.

Self-sorting assembly of artificial building blocks

Self-assembly to build high-level structures, which is ubiquitous in living systems, has captured the imagination of scientists, striving to emulate the intricacy, homogeneity and versatility of the naturally occurring systems, and to pursue a similar level of organization in artificial building blocks. In particular, self-sorting assembly in multicomponent systems, based on the spontaneous recognition and consequent spatial aggregation of the same or interactive building units, is able to realize very complicated assembly behaviours, and usually results in multiple well-ordered products or hierarchical structures in a one-step manner. This highly efficient assembly strategy has attracted tremendous research attention in recent years, and numerous examples have been reported in artificial systems, particularly with supramolecular and polymeric building blocks. In the current review, we summarize the progress in recent years, and classify them into five main categories, based on their working mechanisms or principles. With the review of these strategies, we hope to provide not only some deep insights into this field, but also and more importantly, useful thoughts in the design and fabrication of self-sorting systems in the future.

Using small angle scattering to understand low molecular weight gels

The material properties of a gel are determined by the underpinning network that immobilises the solvent. When gels are formed by the self-assembly of small molecules into a so-called low molecular weight gel, the network is the result of the molecules forming one-dimensional objects such as fibres or nanotubes which entangle or otherwise cross-link to form a three-dimensional network. Characterising the one-dimensional objects and the network is difficult. Many conventional techniques rely on drying to probe the network, which often leads to artefacts. An effective tool to probe the gel in the solvated state is small angle scattering. Both small angle X-ray scattering (SAXS) and small angle neutron scattering (SANS) can be used. Here, we discuss these approaches and provide a tutorial review to describe how these approaches work, what opportunities there are and how the data treatment should be approached. We aim to show the power of this approach and provide enabling information to make them accessible to the non-specialist.

Chemically Fueled Self-Sorted Hydrogels

Narcissistic self-sorting in supramolecular assemblies can help to construct materials with more complex hierarchies. Whereas controlled changes in pH or temperature have been used to this extent for two-component self-sorted gels, here we show that a chemically fueled approach can provide three-component materials with high precision. The latter materials have interesting mechanical properties, such as enhanced or suppressed stiffness, and intricate multistep gelation kinetics. In addition, we show that we can achieve supramolecular templating, where pre-existing supramolecular fibers first act as templates for growth of a second gelator, after which they can selectively be removed.

Targeted Enrichment of Enzyme-Instructed Assemblies in Cancer Cell Lysosomes Turns Immunologically Cold Tumors Hot

Lysosome-relevant cell death induced by lysosomal membrane permeabilization (LMP) has recently attracted increasing attention. However, nearly no studies show that currently available LMP inducers can evoke immunogenic cell death (ICD) or convert immunologically cold tumors to hot. Herein, we report a LMP inducer named TPE-Py-pYK(TPP)pY, which can respond to alkaline phosphatase (ALP), leading to formation of nanoassembies along with fluorescence and singlet oxygen turn-on. TPE-Py-pYK(TPP)pY tends to accumulate in ALP-overexpressed cancer cell lysosomes as well as induce LMP and rupture of lysosomal membranes to massively evoke ICD. Such LMP-induced ICD effectively converts immunologically cold tumors to hot as evidenced by abundant CD8⁺ and CD4⁺ T cells infiltration into the cold tumors. Exposure of ALP-catalyzed nanoassemblies in cancer cell lysosomes to light further intensifies the processes of LMP, ICD and cold-to-hot tumor conversion. This work thus builds a new bridge between lysosome-relevant cell death and cancer immunotherapy.

Unravelling the antimicrobial activity of peptide hydrogel systems: current and future perspectives

The use of hydrogels has garnered significant interest as biomaterial and drug delivery platforms for anti-infective applications. For decades antimicrobial peptides have been heralded as a much needed new class of antimicrobial drugs. Self-assembling peptide hydrogels with inherent antimicrobial ability have recently come to the fore. However, their fundamental antimicrobial properties, selectivity and mechanism of action are relatively undefined. This review attempts to establish a link between antimicrobial efficacy; the self-assembly process; peptide-membrane interactions and mechanical properties by studying several reported peptide systems: β-hairpin/β-loop peptides; multidomain peptides; amphiphilic surfactant-like peptides and ultrashort/low molecular weight peptides. We also explore their role in the formation of amyloid plaques and the potential for an infection etiology in diseases such as Alzheimer's. We look briefly at innovative methods of gel characterization. These may provide useful tools for future studies within this increasingly important field.

Exploiting and controlling gel-to-crystal transitions in multicomponent supramolecular gels

Multicomponent supramolecular gels provide opportunities to form materials that are not accessible when using the single components alone. Different scenarios are possible when mixing multiple components, from complete co-assembly (mixing of the components within the self-assembled structures formed) to complete self-sorting such that each structure contains only one of the components. Most examples of multicomponent gels that currently exist form stable gels. Here, we show that this can be used to control the mechanical properties of the gels, but what is probably most exciting is that we show that we can use a magnetic field to control the shape of the crystals. The gelling component aligns in a magnetic field and so results in anisotropic crystals being formed.

Co-assembled gold nanorod@tripeptide core-shell nanospheres for aqueous Hg2+ removal

The construction of peptide and metal nanoparticles hybrid is attractive to explore their synergistic properties and applications extensively. However, it remains a challenge to fabricate a well-defined and size-controllable short peptide/Au nanoparticles hybrid. Here, we report a facile and flexible co-assembly strategy for the construction of tripeptide coated Au nanorods (AuNRs). The tripeptide (Phe-Phe-Cys, FFC) grows via covalently crosslinking to form spheres. The size of the core@shell nanospheres can be controlled by modulating the amount or size of AuNRs. Especially, the concentration of AuNRs fixes the amount of seeds, which further affect the local concentration of FFC on the surface of AuNRs seed, leading to a narrower diameter of hybrid compared to FFC spheres. Moreover, owing to their synergistic effects, this hybrid exhibits a good adsorption capacity of Hg²⁺ from aqueous solutions by electrostatic interaction and forming into Au/Hg amalgam. This strategy could be extended to the fabrication of other biomolecules and metal nanoparticle hybrids with diverse functions.

Supramolecular Self-Assembly-Facilitated Aggregation of Tumor-Specific Transmembrane Receptors for Signaling Activation and Converting Immunologically Cold to Hot Tumors

Supramolecular self-assembling peptide systems are attracting increasing interest in the field of cancer theranostics. Additionally, transformation of the immunologically cold tumor microenvironment into hot is of great importance for obtaining high antitumor responses for most immunotherapies. However, as far as it is known, there are nearly no studies on self-assembling peptides reported to be able to convert cold to hot tumors. Herein, a self-assembling peptide-based cancer theranostic agent (named DBT-2FFGYSA) is designed and synthesized, which can target tumor-specific transmembrane Eph receptor A2 (EphA2) receptors selectively and make the receptors form large aggregates. Such aggregate formation promotes the cross-phosphorylations among EphA2 receptors, leading to signal transduction of antitumor pathway. As a consequence, DBT-2FFGYSA can not only visualize EphA2 receptors in a fluorescence turn-on manner, but also specifically suppress the EphA2 receptor-overexpressed cancer cell proliferation and tumor growth. What is more, DBT-2FFGYSA also serves as an effective agent to convert immunologically cold tumors to hot by inducing the immunogenic cell death of EphA2 receptor-overexpressed cancer cells and recruiting massive tumor-infiltrating T cells. This study, thus, introduces a new category of agents capable of converting cold to hot tumors by pure supramolecular self-assembly without any aid of known anticancer drugs.

Tuning the antimicrobial activity of low molecular weight hydrogels using dopamine autoxidation

We present a method to trigger the formation of dipeptide-based hydrogels by the simple addition of dopamine. Dopamine undergoes oxidation in air, reducing the pH to induce gelation. The production of polydopamine and release of reactive oxygen species such as hydrogen peroxide confers antimicrobial activity. Gel stiffness can be controlled by modulating the initial starting pH of the gelator solution. We can use this method to tune the antimicrobial activity of the gels, with gels that are less stiff demonstrating increased bactericidal efficacy against Gram-positive bacteria.

Peptide-Based Gel in Environmental Remediation: Removal of Toxic Organic Dyes and Hazardous Pb2+ and Cd2+ Ions from Wastewater and Oil Spill Recovery

A dipeptide-based synthetic amphiphile bearing a myristyl chain has been found to form hydrogels in the pH range 6.9-8.5 and organogels in various organic solvents including petroleum ether, diesel, kerosene, and petrol. These organogels and hydrogels have been thoroughly studied and characterized by different techniques including high-resolution transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and rheology. It has been found that the xerogel obtained from the peptide gelator can trap various toxic organic dyes from wastewater efficiently. Moreover, the hydrogel has been used to remove toxic heavy metal ions Pb²⁺ and Cd²⁺ from wastewater. Dye adsorption kinetics has been studied, and it has been fitted by using the Freundlich isotherm equation. Interestingly, the gelator amphiphilic peptide gels fuel oil, kerosene, diesel, and petrol in a biphasic mixture of salt water and oil within a few seconds. This indicates that these gels not only may find application in oil spill recovery but also can be used to remove toxic organic dyes and hazardous toxic metal ions from wastewater. Moreover, the gelator can be recycled several times without significant loss of activity, suggesting the sustainability of this new gelator. This holds future promise for environmental remediation by using peptide-based gelators.

Assembly pattern of multicomponent supramolecular oleogel composed of ceramide and lecithin in sunflower oil: self-assembly or self-sorting?

Ceramide (CER) is a novel food-grade organogelator with beneficial health effects. Lecithin (LEC) is not an effective gelator; however, it may alter the crystal morphology of the host gelator in a multicomponent system. In this paper, LEC and CER were mixed at various molar ratios in sunflower oil leading to different gelation behaviors. It was interesting since in this multicomponent system, gels formed when there was more less-effective gelator (LEC), while gels hardly formed when there was more effective gelator (CER). This drew our attention since there might not be only one kind of assembly mode between the LEC and the CER. A comprehensive rheological investigation was conducted. It was found that at specific ratios (6L4C and 5L5C), strong gels (G' > 1.0 × 105 Pa) formed with superior oil binding capacity (up to 99.84%). Meanwhile, these gels exhibited higher tolerance level to permanent deformation than the monocomponent gel. However, weak gels were observed off the optimal ratio (8L2C, 7L3C, 4L6C and 3L7C). The crystal morphology of gels drastically changed with change in gelator proportion. Short needle-like crystals and small rosette crystals were observed in 6L4C and 5L5C, respectively, while other samples exhibited spherulite-shaped crystals (8L2C, 7L3C, 4L6C, and 3L7C), which differed from any of the monocomponent gel structures (10L0C and 0L10C). Results from differential scanning calorimetry and polarized light microscopy suggested that the macroscopic properties are determined by the morphology and distribution of crystals rather than the crystallinity of the matrix. Fourier transform infrared spectroscopy results indicated the presence of van der Waals forces and the formation of hydrogen bonding between the phosphate of the LEC and the amide group of the CER. The above results indicated that the LEC and CER co-assembled at approximately equal molar ratio, and the redundant LEC or CER at other ratios self-sorted to combine with the co-assembled fibers by lateral association, leading to potentially different underlying microstructures. These multicomponent supramolecular oleogels with high tunability may further broaden their applicability in various healthy lipid-based product formats.

Collagen-Inspired Helical Peptide Coassembly Forms a Rigid Hydrogel with Twisted Polyproline II Architecture

Collagen, the most abundant protein in mammals, possesses notable cohesion and elasticity properties and efficiently induces tissue regeneration. The Gly-Pro-Hyp canonical tripeptide repeating unit of the collagen superhelix has been well-characterized. However, to date, the shortest tripeptide repeat demonstrated to attain a helical conformation contained 3-10 peptide repeats. Here, taking a minimalistic approach, we studied a single repeating unit of collagen in its protected form, Fmoc-Gly-Pro-Hyp. The peptide formed single crystals displaying left-handed polyproline II superhelical packing, as in the native collagen single strand. The crystalline assemblies also display head-to-tail H-bond interactions and an "aromatic zipper" arrangement at the molecular interface. The coassembly of this tripeptide, with Fmoc-Phe-Phe, a well-studied dipeptide hydrogelator, produced twisted helical fibrils with a polyproline II conformation and improved hydrogel mechanical rigidity. The design of these peptides illustrates the possibility to assemble superhelical nanostructures from minimal collagen-inspired peptides with their potential use as functional motifs to introduce a polyproline II conformation into hybrid hydrogel assemblies.

Control of seed formation allows two distinct self-sorting patterns of supramolecular nanofibers

Self-sorting double network hydrogels comprising orthogonal supramolecular nanofibers have attracted attention as artificially-regulated multi-component systems. Regulation of network patterns of self-sorted nanofibers is considered as a key for potential applications such as optoelectronics, but still challenging owing to a lack of useful methods to prepare and analyze the network patterns. Herein, we describe the selective construction of two distinct self-sorting network patterns, interpenetrated and parallel, by controlling the kinetics of seed formation with dynamic covalent oxime chemistry. Confocal imaging reveals the interpenetrated self-sorting network was formed upon addition of O-benzylhydroxylamine to a benzaldehyde-tethered peptide-type hydrogelator in the presence of lipid-type nanofibers. We also succeed in construction of a parallel self-sorting network through deceleration of seed formation using a slow oxime exchange reaction. Through careful observation, the formation of peptide-type seeds and nanofibers is shown to predominantly occur on the surface of the lipid-type nanofibers via highly dynamic and thermally-fluctuated processes.

Regulation of self-sorted nanofiber network patterns in double network hydrogels comprising supramolecular nanofibers is considered as key for potential applications. Here, the authors describe a selective construction of two distinct self-sorting network patterns, by controlling the kinetics of seed formation with dynamic covalent chemistry.

Pyrene-Based Co-Assembled Supramolecular Gel; Morphology Changes and Macroscale Mechanical Property

Two pyrene derivatives having the perylenediimide (1) or the alky chain (2) in the middle of molecules were synthesized. Co-assembled supramolecular gels were prepared at different molar ratios of 0.2, 0.5, and 0.8 equiv. of 2 to 1. By SEM observation, the morphology of co-assembled supramolecular gels changed from spherical nanoparticles to three-dimensional network nanofibers as the ratio of 2 increased. In addition, the pyrene-excimer emission of co-assembled gels increased with increasing concentration of 2, and was stronger when compared with the condition without 1 or 2, indicating the formation of pyrene interaction between 1 and 2. In addition, the sol-gel transition was found to be reversible over repeated measurement by tube inversion method. The rheological properties of co-assembled supramolecular gels were also improved by increasing the ratio of 2, due to the increased nanoscale flexibility of supramolecular packing by introducing alkyl chain groups through heterogeneous pyrene interaction. These findings suggest that macroscale mechanical strength of co-assembled supramolecular gel was strongly influenced by nanoscale flexibility of the supramolecular packing.

Self-assembly of isomeric naphthalene appended glucono derivatives: nanofibers and nanotwists with circularly polarized luminescence emission

Two isomeric naphthalene appended glucono derivatives substituted at the 1 or 2-naphthyl positions (Nap-1 and Nap-2) were designed and their self-assembly behaviors and optical properties were investigated. Nap-1 and Nap-2 were found to self-assemble into nanofibers and nanotwists, respectively. While the molecular chirality of the glucono moiety could not be effectively transferred to the naphthalene moiety in the Nap-1 system, this was achieved in the Nap-2 assembly. Thus, the Nap-2 assembly showed obvious circular dichroism (CD) and circularly polarized luminescence (CPL) signals. From the XRD patterns and IR spectra of the supramolecular assemblies, it was found that Nap-2 packed in a more orderly fashion than Nap-1, leading to a hierarchical assembly forming nanotwist structures. Moreover, a light-harvesting system based on Nap-2 supramolecular gels and dyes was established, in which an efficient energy transfer was demonstrated from Nap-2 to an acceptor Eosin Y. It was further found that both chirality and energy transfer enhanced the dissymmetry factor of Eosin Y CPL emission.

Impact of NDI-Core Substitution on the pH-Responsive Nature of Peptide-Tethered Luminescent Supramolecular Polymers

The pH-responsive nature of two self-assembled NDI-peptide amphiphile conjugates is reported. The diethoxy substituted NDI showed a pH-dependent assembly behaviour, as expected. In contrast, the isopropylamino- and ethoxy-substituted NDI based supramolecular polymer was stable at acidic and basic aqueous conditions. This finding highlights how subtle changes in the molecular design of π-stacked chromophore-peptide conjugates have a drastic impact on their equilibrium structure and ultimately functional properties.

The electrochemical fabrication of hydrogels: a short review

Electrochemical hydrogel fabrication is the process of preparing hydrogels directly on to an electrode surface. There are a variety of methods to fabricate hydrogels, which are specific to the type of gelator and the desired properties of the hydrogel. A range of analytical methods that can track this gelation and characterise the final properties are discussed in this short review.

Hydrogels Self-Assembled from an Azobenzene Building Block: Stability toward UV Irradiation in the Gel and Thin-Film States

Azobenzene and its derivatives are widely used as photoresponsive units for the fabrication of photoresponsive smart materials. In this work, two azobenzene derivatives were designed and investigated as hydrogelators, namely N-4-azodiphenyl-maleimic acid (ADPMA) and N-4-azodiphenyl-succinic acid (ADPSA) bearing azobenzene and carboxylic acid segments. In the process of deprotonation/protonation of the carboxylic acids by pH variation, the self-assembly of these two gelators was triggered. ADPMA could transform from solution to hydrogel while the solution of ADPSA formed a precipitate under the same conditions. The solution-gel/precipitate transformation can be repeated by changing the pH. In contrast to the conventional responsiveness to UV-light irradiation for azobenzene-based gels, the ADPMA hydrogel shows typical trans-cis isomerization of the azobenzene unit in solution, yet the hydrogel demonstrates remarkable stability to UV light irradiation in both the bulk gel and thin film states.

The Power of Confocal Laser Scanning Microscopy in Supramolecular Chemistry: In situ Real-time Imaging of Stimuli-Responsive Multicomponent Supramolecular Hydrogels

Multicomponent supramolecular hydrogels are promising scaffolds for applications in biosensors and controlled drug release due to their designer stimulus responsiveness. To achieve rational construction of multicomponent supramolecular hydrogel systems, their in-depth structural analysis is essential but still challenging. Confocal laser scanning microscopy (CLSM) has emerged as a powerful tool for structural analysis of multicomponent supramolecular hydrogels. CLSM imaging enables real-time observation of the hydrogels without the need of drying and/or freezing to elucidate their static and dynamic properties. Through multiple, selective fluorescent staining of materials of interest, multiple domains formed in supramolecular hydrogels (e. g. inorganic materials and self-sorting nanofibers) can also be visualized. CLSM and the related microscopic techniques will be indispensable to investigate complex life-inspired supramolecular chemical systems.

Supramolecular Self-Assembly To Control Structural and Biological Properties of Multicomponent Hydrogels

Self-assembled nanofibers are ubiquitous in nature and serve as inspiration for the design of supramolecular hydrogels. A multicomponent approach offers the possibility of enhancing the tunability and functionality of this class of materials. We report on the synergistic multicomponent self-assembly involving a peptide amphiphile (PA) and a 1,3:2,4-dibenzylidene-d-sorbitol (DBS) gelator to generate hydrogels with tunable nanoscale morphology, improved stiffness, enhanced self-healing, and stability to enzymatic degradation. Using induced circular dichroism of Thioflavin T (ThT), electron microscopy, small-angle neutron scattering, and molecular dynamics approaches, we confirm that the PA undergoes self-sorting, while the DBS gelator acts as an additive modifier for the PA nanofibers. The supramolecular interactions between the PA and DBS gelators result in improved bulk properties and cytocompatibility of the two-component hydrogels as compared to those of the single-component systems. The tunable mechanical properties, self-healing ability, resistance to proteolysis, and biocompatibility of the hydrogels suggest future opportunities for the hydrogels as scaffolds for tissue engineering and drug delivery vehicles.

Insight into the self-assembly of water-soluble perylene bisimide derivatives through a combined computational and experimental approach

We use a combination of computational and experimental techniques to study the self-assembly and gelation of water-soluble perylene bisimides derivatised at the imide position with an amino acid. Specifically, we study the likely structure of self-assembled aggregates of the alanine-functionalised perylene bisimide (PBI-A) and the thermodynamics of their formation using density functional theory and predict the UV-vis spectra of such aggregates using time-dependent density functional theory. We compare these predictions to experiments in which we study the evolution of the UV-Vis and NMR spectra and the rheology and neutron scattering of alkaline PBI-A solutions when gradually decreasing the pH. Based on the combined computational and experimental results, we show that PBI-A self-assembles at all pH values but that aggregates grow in size upon protonation. Hydrogel formation is driven not by aggregate growth but reduction of the aggregation surface-charge and a decrease in the colloidal stability of the aggregation with respect to agglomeration.

A novel supramolecular AIE π-gel for fluorescence detection and separation of metal ions from aqueous solution

A novel supramolecular aggregation induced emission (AIE) π-gel (ONT) was constructed by using a functionalized trimesic amide (TCP) molecule assembled with a bis-pyridine functionalized naphthalene diimide (ND) molecule using a non-covalent interaction. The ONT showed strong AIE at 468 nm. Furthermore, the ONT could detect and adsorb ferric (Fe³⁺) or cupric (Cu²⁺) ions from water. Meanwhile, a thin film based on supramolecular AIE π-gel ONT was prepared, which could be used as a fluorescent security display material for detecting Fe³⁺ or Cu²⁺. Thus, the AIE π-gel ONT shows potential for practical applications in efficient multi-analyte detection and separation and as a fluorescent display material.

Sequential Assembly of Mutually Interactive Supramolecular Hydrogels and Fabrication of Multi-Domain Materials

A two-component self-sorting hydrogel based on acylhydrazide and carboxylic acid derivatives of 1,3:2,4-dibenzylidene-d-sorbitol (DBS-CONHNH₂ and DBS-COOH) is reported. A heating-cooling cycle induces the self-assembly of DBS-CONHNH₂ , followed by the self-assembly of DBS-COOH induced by decreasing pH. Although the networks are formed sequentially, there is spectroscopic evidence of interactions between them, which impact on the mechanical properties and significantly enhance the ability of these low-molecular-weight gelators (LMWGs) to form gels when mixed. The DBS-COOH network can be switched "off" and "on" within the two-component gel through a pH change. By using a photo-acid generator, the two-component gel can be prepared combining the thermal trigger with photo-irradiation. Photo-patterned self-assembly of DBS-COOH within a pre-formed DBS-CONHNH₂ gel under a mask yields spatially controlled multi-domain gels. Different gel domains can have different functions, for example, controlling the rate of release of heparin incorporated into the gel, or directing gold nanoparticle assembly. Such photo-patterned multi-component hydrogels have potential applications in regenerative medicine or bio-nano-electronics.

Mutualistic benefit in the self-sorted co-aggregates of peri-naphthoindigo and a 4-amino-1,8-naphthalimide derivative

Photoluminescence enhancement for all the members of a self-sorted co-aggregate was observed for the first time by successfully amalgamating AIEE and social self-sorting. Intermolecular H-bonding and π-π stacking were utilised to prepare several co-aggregates of peri-naphthoindigo (PNI) and a 4-amino-1,8-naphthalimide derivative dye, NH₂-NMI. In the heteromeric aggregates, photoluminescence intensities were increased by 28% for the imide and more than 400% for PNI. Due to spectral overlap between the emission of the imide and the absorption of PNI, energy transfer took place from the former to the latter. The heteromeric aggregates are dual emissive and the relative intensities of the emissions can easily be tuned by varying the stoichiometry of the dyes.

Self-assemblies of nucleolipid supramolecular synthons show unique self-sorting and cooperative assembling process

The inherent control of the self-sorting and co-assembling process that has evolved in multi-component biological systems is not easy to emulate in vitro using synthetic supramolecular synthons. Here, using the basic component of nucleic acids and lipids, we describe a simple platform to build hierarchical assemblies of two component systems, which show an interesting self-sorting and co-assembling behavior. The assembling systems are made of a combination of amphiphilic purine and pyrimidine ribonucleoside-fatty acid conjugates (nucleolipids), which were prepared by coupling fatty acid acyl chains of different lengths at the 2'-O- and 3'-O-positions of the ribose sugar. Individually, the purine and pyrimidine nucleolipids adopt a distinct morphology, which either supports or does not support the gelation process. Interestingly, due to the subtle difference in the order of formation and stability of individual assemblies, different mixtures of supramolecular synthons and complementary ribonucleosides exhibit a cooperative and disruptive self-sorting and co-assembling behavior. A systematic morphological analysis combined with single crystal X-ray crystallography, powder X-ray diffraction (PXRD), NMR, CD, rheological and 3D X-ray microtomography studies provided insights into the mechanism of the self-sorting and co-assembling process. Taken together, this approach has enabled the construction of assemblies with unique higher ordered architectures and gels with remarkably enhanced mechanical strength that cannot be derived from the respective single component systems.

Controlling the Assembly and Properties of Low-Molecular-Weight Hydrogelators

Low-molecular-weight gels are formed by the self-assembly of small molecules into fibrous networks that can immobilize a significant amount of solvent. Here, we focus on our work with a specific class of gelator, the functionalized dipeptide. We discuss the current state of the art in the area, focusing on how these materials can be controlled. We also highlight interesting and unusual observations and unanswered questions in the field.