Dual Photocatalytic Roles of Light: Charge Separation at the Band Gap and Heat via Localized Surface Plasmon Resonance To Convert CO2 into CO over Silver–Zirconium Oxide

A Ni-O-Ag photothermal catalyst enables 103-m2 artificial photosynthesis with >17% solar-to-chemical energy conversion efficiency

The scalable artificial photosynthesis composed of photovoltaic electrolysis and photothermal catalysis is limited by inefficient photothermal CO2 hydrogenation under weak sunlight irradiation. Herein, NiO nanosheets supported with Ag single atoms [two-dimensional (2D) Ni1Ag0.02O1] are synthesized for photothermal CO2 hydrogenation to achieve 1065 mmol g-1 hour-1 of CO production rate under 1-sun irradiation. This performance is attributed to the coupling effect of Ag-O-Ni sites to enhance the hydrogenation of CO2 and weaken the CO adsorption, resulting in 1434 mmol g-1 hour-1 of CO yield at 300°C. Furthermore, we integrate the 2D Ni1Ag0.02O1-supported photothermal reverse water-gas shift reaction with commercial photovoltaic electrolytic water splitting to construct a 103-m2 scale artificial photosynthesis system (CO2 + H2O → CO + H2 + O2), which achieves more than 22 m3/day of green syngas with an adjustable H2/CO ratio (0.4-3) and a photochemical energy conversion efficiency of >17%. This research charts a promising course for designing practical, natural sunlight-driven artificial photosynthesis systems.

Photocatalytic CO2 Reduction Using Ti3C2Xy (X = Oxo, OH, F, or Cl) MXene-ZrO2: Structure, Electron Transmission, and the Stability

CO2 photoreduction using a semiconductor-based photocatalyst is a promising option for completing a new carbon-neutral cycle. The short lifetime of charges generated owing to light energy is one of the most critical problems in further improving the performance of semiconductor-based photocatalysts. This study shows the structure, electron transmission, and stability of Ti3C2Xy (X = oxo, OH, F, or Cl) MXene combined with a ZrO2 photocatalyst. Using H2 as a reductant, the photocatalytic CO formation rate increased by 6.6 times to 4.6 μmol h-1 gcat-1 using MXene (3.0 wt %)-ZrO2 compared to that using ZrO2, and the catalytic route was confirmed using 13CO2 to form 13CO. In clear contrast, using H2O (gas) as a reductant, CH4 was formed as the major product using Ti3C2Xy MXene (5.0 wt %)-ZrO2 at the rate of 3.9 μmol h-1 gcat-1. Using 13CO2 and H2O, 12CH4, 12C2H6, and 12C3H8 were formed besides H212CO, demonstrating that the C source was the partial decomposition and hydrogenation of Ti3C2Xy. Using the atomic force and high-resolution electron microscopies, 1.6 nm thick Ti3C2Xy MXene sheets were observed, suggesting ∼3 stacked layers that are consistent with the Ti-C and Ti···Ti interatomic distances of 0.218 and 0.301 nm, respectively, forming a [Ti6C] octahedral coordination, and the major component as the X ligand was suggested to be F and OH/oxo, with the temperature increasing by 116 K or higher owing to the absorbed light energy, all based on the extended X-ray absorption fine structure analysis.

Supra-Photothermal CO2 Methanation over Greenhouse-Like Plasmonic Superstructures of Ultrasmall Cobalt Nanoparticles

Improving the solar-to-thermal energy conversion efficiency of photothermal nanomaterials at no expense of other physicochemical properties, e.g., the catalytic reactivity of metal nanoparticles, is highly desired for diverse applications but remains a big challenge. Herein, a synergistic strategy is developed for enhanced photothermal conversion by a greenhouse-like plasmonic superstructure of 4 nm cobalt nanoparticles while maintaining their intrinsic catalytic reactivity. The silica shell plays a key role in retaining the plasmonic superstructures for efficient use of the full solar spectrum, and reducing the heat loss of cobalt nanoparticles via the nano-greenhouse effect. The optimized plasmonic superstructure catalyst exhibits supra-photothermal CO2 methanation performance with a record-high rate of 2.3 mol gCo -1 h-1 , close to 100% CH4 selectivity, and desirable catalytic stability. This work reveals the great potential of nanoscale greenhouse effect in enhancing photothermal conversions through the combination with conventional promoting strategies, shedding light on the design of efficient photothermal nanomaterials for demanding applications.

Hierarchical Hollow Carbon Particles with Encapsulation of Carbon Nanotubes for High Performance Supercapacitors

A novel and sustainable carbon-based material, referred to as hollow porous carbon particles encapsulating multi-wall carbon nanotubes (MWCNTs) (CNTs@HPC), is synthesized for use in supercapacitors. The synthesis process involves utilizing LTA zeolite as a rigid template and dopamine hydrochloride (DA) as the carbon source, along with catalytic decomposition of methane (CDM) to simultaneously produce MWCNTs and COx -free H2 . The findings reveal a distinctive hierarchical porous structure, comprising macropores, mesopores, and micropores, resulting in a total specific surface area (SSA) of 913 m2  g-1 . The optimal CNTs@HPC demonstrates a specific capacitance of 306 F g-1 at a current density of 1 A g-1 . Moreover, this material demonstrates an electric double-layer capacitor (EDLC) that surpasses conventional capabilities by exhibiting additional pseudocapacitance characteristics. These properties are attributed to redox reactions facilitated by the increased charge density resulting from the attraction of ions to nickel oxides, which is made possible by the material's enhanced hydrophilicity. The heightened hydrophilicity can be attributed to the presence of residual silicon-aluminum elements in CNTs@HPC, a direct outcome of the unique synthesis approach involving nickel phyllosilicate in CDM. As a result of this synthesis strategy, the material possesses excellent conductivity, enabling rapid transportation of electrolyte ions and delivering outstanding capacitive performance.

TiO2-Ag-NP adhesive photocatalytic films able to disinfect living indoor spaces with a straightforward approach

TiO₂-Ag doped nanoparticulate (TiO₂-Ag-NP) adhesive photocatalytic films were used to assess the ability in dropping down the burden of indoor microbial particles. The application of an easy-to use photocatalytic adhesive film to cleanse indoor living spaces from microbial pollution, represents a novelty in the field of photocatalytic devices. Reduction was attained by photocatalysis in selected spaces, usually with overcrowding (≥ 3 individuals) in the common working daily hours, and upon indoor microclimate monitoring. TiO₂-Ag doped nanoparticulate (TiO₂-Ag-NP) adhesive photocatalytic films were applied within five types of living spaces, including schools and job places. The microbial pollution was assessed at time 0 (far from routine clean, ≥ 9 h) and throughout 2-4 weeks following the photocatalyst application by relative light unit (RLU) luminometry and microbial indirect assessment (colony forming units per cubic meter, CFU/m³). TiO₂-Ag-NP photocatalyst reduced RLU and CFU/m³ by rates higher than 70% leading to RLU ≤ 20 and microbial presence ≤ 35 CFU/m³. The described TiO₂-Ag-NP is able to reduce microbial pollution to the lowest RLU threshold (≤ 20) within 60 min in open daylight in a standardized test room of 100 m². The correlation between RLU and CFU/m³ was positive (r = 0.5545, p < 0.05), assessing that the microbial reduction of indoor areas by the TiO₂-Ag-NP adhesive film was real. Titania photocatalysts represent promising tools to ensure air cleaning and sanitization in living indoor microclimates with a low cost, feasible and straightforward approach. This approach represents an easy to handle, cost effective, feasible and efficacious approach to reduce microbial pollution in indoor spaces, by simply attaching a TiO₂-Ag-NP adhesive film on the wall.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

Recent progress of theoretical studies on electro- and photo-chemical conversion of CO2 with single-atom catalysts

The CO₂ reduction reaction (CO₂RR) into chemical products is a promising and efficient way to combat the global warming issue and greenhouse effect. The viability of the CO₂RR critically rests with finding highly active and selective catalysts that can accomplish the desired chemical transformation. Single-atom catalysts (SACs) are ideal in fulfilling this goal due to the well-defined active sites and support-tunable electronic structure, and exhibit enhanced activity and high selectivity for the CO₂RR. In this review, we present the recent progress of quantum-theoretical studies on electro- and photo-chemical conversion of CO₂ with SACs and frameworks. Various calculated products of CO₂RR with SACs have been discussed, including CO, acids, alcohols, hydrocarbons and other organics. Meanwhile, the critical challenges and the pathway towards improving the efficiency of the CO₂RR have also been discussed.

Research on photocatalytic CO2 conversion to renewable synthetic fuels based on localized surface plasmon resonance: current progress and future perspectives

Due to its desirable optoelectronic properties, localized surface plasmon resonance (LSPR) can hopefully play a promising role in photocatalytic CO2 reduction reaction (CO2RR). In this review, mechanisms and applications of LSPR effect in this field are introduced in detail.

Silver Halide-Based Nanomaterials in Biomedical Applications and Biosensing Diagnostics

In recent years, silver halide (AgX, X = Cl, Br, I)-based photocatalytic materials have received increasing research attention owing to their excellent visible-light-driven photocatalytic performance for applications in organic pollutant degradation, HER, OER, and biomedical engineering. Ag as a noble metal has a surface plasma effect and can form Schottky junctions with AgX, which significantly promotes electron transport and increases photocatalytic efficiency. Therefore, Ag/AgX can reduce the recombination rate of electrons and holes more than pure AgX, leading to using AgX as a photocatalytic material in biomedical applications. The use of AgX-based materials in photocatalytic fields can be classified into three categories: AgX (Ag/AgX), AgX composites, and supported AgX materials. In this review, we introduce recent developments made in biomedical applications and biosensing diagnostics of AgX (Ag/AgX) photocatalytic materials. In addition, this review also discusses the photocatalytic mechanism and applications of AgX (Ag/AgX) and supported AgX materials.

Altered zirconium dioxide based photocatalyst for enhancement of organic pollutants degradation: A review

Heterogeneous advanced oxidation processes are a promising approach for cost-efficient removal of pollutants using semiconductors. Zirconium dioxide (ZrO₂) is an auspicious material for photocatalytic activity owning to its suitable bandgap, stability, and low cost. However, ZrO₂ suffers from fast recombination rate, and poor light harvesting ability. Nonetheless, extra modification has also shown improvements and therefore is worth investigating. The endeavour of this paper initially discusses the fundamentals with respect to reactive species, classification, and synthesis methods for ZrO₂. Furthermore, with particular consideration to stability and reusability, several additional modification approaches for ZrO₂-based photocatalysts such as doping and noble metals loading. Furthermore, the formation of heterojunctions has also been shown to boost photocatalytic activity while inhibiting charge carrier recombination. Finally, photocatalyst separation via magnetic-based photocatalysts are elucidated. As a result, ZrO₂-based photocatalysts are regarded as a promising emerging technology that warrants further development and research.

Silver based photocatalysts in emerging applications

The infinite availability of solar energy grants the potential of fulfilling the energy demands and environmental sustainability requirements with more feasible and reliant renewable energy forms through photocatalysis. In the past decade, the intensive plasmonic effect, suitable work function, superior electrical conductivity and physiochemical properties have made Ag-based photocatalysts attractive components for emerging applications. The local surface plasmon resonance effect (LSPR) provides extra hot-carriers to participate in the photocatalytic process, and Schottky/Ohmic contacts would facilitate charge transfer. Here, recent studies focused on Ag-based photocatalysts for emerging applications are reviewed. Notably, the mechanisms of LSPR, the Schottky barrier and ohmic contacts are introduced together with urgent issues in CO₂ reduction, antibacterial application, H₂ generation, and environmental hazard removal. Additionally, some perspectives and directions on more comprehensive designs on material system, band alignment and functionalization are given to further the exploration in this research area.

Site-Specific Electron-Driving Observations of CO2 -to-CH4 Photoreduction on Co-Doped CeO2 /Crystalline Carbon Nitride S-Scheme Heterojunctions

Photoexcited dynamic modulation, maximizing the effective utilization of photoinduced electron-hole pairs, dominates the multiple electrons-involving reduction pathways for terminal CH₄ evolution during CO₂ photoreduction. Yet, the site-specific regulation of directional charge transfer by modification of an S-scheme heterojunction has seldom been discussed. Herein, an atomic-level tailoring strategy by anchoring single-atomic Co into CeO₂ co-catalyst rather than carbon nitride supports, which can selectively favor CO₂ -to-CH₄ photoreduction, is reported. Through in situ dynamic tracking investigations, this study identifies that surface Co-embedded bimetallic CeCo conjunction is the key feature driving a strong interconnection of dynamical charge states through S-scheme heterojunctions. The Co-embedded modification into CeO₂ co-catalysts is demonstrated to have a critical effect on directional charge control, accelerating the driving of electrons from the carbon nitride donations to site-specific Co hubs, which thereby promotes electronic transferability for electrons-involving CH₄ formation. As a result, an unprecedented CH₄ yield (181.7 µmol g^-1 ) is obtained with a high turnover number (411.4) through a fully gas-solid reaction, demonstrating its potential toward targeted CH₄ formation without adding any sacrificial agent.

Efficient Photoinduced Thermocatalytic Chemiluminescence System Based on the Z-Scheme Heterojunction Ag3PO4/Ag/Bi4Ti3O12 for H2S Sensing

Cataluminescence as a highly efficient gas transduction principle has attracted wide attention among research in environmental monitoring and clinical diagnosis with increasing awareness of human safety. Nowadays, the development of innovation sensing systems and the construction of the sensing mechanism to improve the analytical performance of compounds remain a major challenge. Herein, we construct an advanced photoinduced thermocatalytic chemiluminescence (PI-TC-CL) gas-sensing system via the introduction of a Z-scheme heterojunction Ag₃PO₄/Ag/Bi₄Ti₃O₁₂ to achieve higher efficient detection of H₂S. The unique electron transport path of the Z-scheme heterojunction and the LSPR effect of Ag nanoparticles fascinate the generation of the photoinduced electron-hole pair on the surface of catalysts when stimulated by LED lamps and slow down the recombination of electron-hole pairs under thermal conditions. Thus, based on the cooperative effect of the Z-scheme heterojunction AgPO/Ag/BTO and PI-TC-CL system, we have successfully established an efficient H₂S CTL detection system, which has a response three times higher than that on the traditional CTL system and even 45 times higher than that on BTO and ranges among the best of the state-of-the-art CTL performance in H₂S detection with the linear range of 0.095-8.87 μg mL^-1 and a limit of detection of 0.0065 μg mL^-1. Besides, to explore the gas-sensing mechanism, the synergetic effects of photoinduction and thermal catalysis are investigated thoroughly via conductivity and electrochemical experiments. This research provides a new perspective of engineering highly efficient catalysts and ingenious sensor systems through designing the nanostructure of materials and synergism catalytic mechanism.

The Sensitization of TiO2 Thin Film by Ag Nanoparticles for the Improvement of Photocatalytic Efficiency

The formation of Ag nanoparticles on the surface of TiO2 (AgNP/TiO2) to enhance photocatalytic efficiency was studied. The Ag nanoparticles (AgNP) size, form, and distribution dependence on the initial thickness of Ag thin films, annealing temperature, and time were analyzed. The optimal annealing temperature of 400 °C and annealing time of 60 min were chosen to form AgNP from the initial Ag thin films with a thickness of 5, 7.5, and 10 nm. The formation of AgNP was done on amorphous TiO2 (a-TiO2), which crystallized into the anatase phase after the annealing. The photocatalytic efficiency (k–degradation rate constant, Defi–degradation efficiency) was evaluated by the photodegradation of Rhodamine B aqueous solution. The results suggested that the highest photocatalytic efficiency of Rhodamine B aqueous solution was reached where the average diameter (DA) of AgNP was ~38 nm (k38 = 0.017 min−1, Defi_38 = 63.5%), compared to 27 and 82 nm (k27 = 0.012 min−1, Defi_27 = 51.2% and k82 = 0.011 min−1, Defi_82 = 52.1%, respectively). The acquired results did not show clear correlation between the size and distribution of the AgNP on the TiO2 surface and photocatalytic efficiency. Nevertheless, the results suggest that AgNP can enhance the photocatalytic efficiency of TiO2 thin films (kTiO2 = 0.008 min−1, Defi_TiO2 = 36.3%).

Direct Conversion of CO2 into Hydrocarbon Solar Fuels by a Synergistic Photothermal Catalysis

Photothermal coupling catalysis technology has been widely studied in recent years and may be a promising method for CO2 reduction. Photothermal coupling catalysis can improve chemical reaction rates and realize the controllability of reaction pathways and products, even in a relatively moderate reaction condition. It has inestimable value in the current energy and global environmental crisis. This review describes the application of photothermal catalysis in CO2 reduction from different aspects. Firstly, the definition and advantages of photothermal catalysis are briefly described. Then, different photothermal catalytic reductions of CO2 products and catalysts are introduced. Finally, several strategies to improve the activity of photothermal catalytic reduction of CO2 are described and we present our views on the future development and challenges of photothermal coupling. Ultimately, the purpose of this review is to bring more researchers’ attention to this promising technology and promote this technology in solar fuels and chemicals production, to realize the value of the technology and provide a better path for its development.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Light-driven carbon dioxide reduction over the Ag-decorated modified TS-1 zeolite

Cu species doped defective Ag/TS-1 owns Ti3+–Vo which could play an vital part in stabilizing Cu2O. It shows high selectivity for CO and C2H5OH under light excitation and photoelectric condition. The possible pathway of CO2RR process is proposed.

Indirect to Direct Charge Transfer Transition in Plasmon-Enabled CO2 Photoreduction

Understanding hot carrier dynamics between plasmonic nanomaterials and its adsorbate is of great importance for plasmon-enhanced photoelectronic processes such as photocatalysis, optical sensing and spectroscopic analysis. However, it is often challenging to identify specific dominant mechanisms for a given process because of the complex pathways and ultrafast interactive dynamics of the photoelectrons. Here, using CO₂ reduction as an example, the underlying mechanisms of plasmon-driven catalysis at the single-molecule level using time-dependent density functional theory calculations is clearly probed. The CO₂ molecule adsorbed on two typical nanoclusters, Ag₂₀ and Ag₁₄₇ , is photoreduced by optically excited plasmon, accompanied by the excitation of asymmetric stretching and bending modes of CO₂ . A nonlinear relationship has been identified between laser intensity and reaction rate, demonstrating a synergic interplay and transition from indirect hot-electron transfer to direct charge transfer, enacted by strong localized surface plasmons. These findings offer new insights for CO₂ photoreduction and for the design of effective pathways toward highly efficient plasmon-mediated photocatalysis.

Preparation of Amine-Modified Cu-Mg-Al LDH Composite Photocatalyst

Cu-Mg-Al layered double hydroxides (LDHs) with amine modification were prepared by an organic combination of an anionic surfactant-mediated method and an ultrasonic spalling method using N-aminoethyl-γ-aminopropyltrimethoxysilane as a grafting agent. The materials were characterized by elemental analysis, XRD, SEM, FTIR, TGA, and XPS. The effects of the Cu²⁺ content on the surface morphology and the CO₂ adsorption of Cu-Mg-Al LDHs were investigated, and the kinetics of the CO₂ adsorption and the photocatalytic reduction of CO₂ were further analyzed. The results indicated that the amine-modified method and appropriate Cu²⁺ contents can improve the surface morphology, the increase amine loading and the free-amino functional groups of the materials, which were beneficial to CO₂ capture and adsorption. The CO₂ adsorption capacity of Cu-Mg-Al N was 1.82 mmol·g⁻¹ at 30 °C and a 0.1 MPa pure CO₂ atmosphere. The kinetic model confirmed that CO₂ adsorption was governed by both the physical and chemical adsorption, which could be enhanced with the increase of the Cu²⁺ content. The chemical adsorption was suppressed, when the Cu²⁺ content was too high. Cu-Mg-Al N can photocatalytically reduce CO₂ to methanol with Cu²⁺ as an active site, which can significantly improve the CO₂ adsorption and photocatalytic conversion.

Brookite TiO2 Nanoparticles Decorated with Ag/MnOx Dual Cocatalysts for Remarkably Boosted Photocatalytic Performance of the CO2 Reduction Reaction

The solar-driven CO₂ reduction reaction (CO₂RR) for producing chemical fuels is considered to be a promising approach to dealing with the growing energy crisis and greenhouse effect. Herein, novel Ag/MnO_x dual-cocatalyst-decorated brookite titania (BT) nanoparticles with remarkably boosted photocatalytic CO₂RR performance are prepared through a facile photodeposition method. The resultant xAg-BT-yMn composite with optimal cocatalyst content delivers amazing CO/CH₄ yields of 31.70/129.98 μmol g^-1 with an overall photoactivity of 1103.28 μmol g^-1 h^-1, 11.98 times higher than that of the BT nanoparticles alone. Further investigations demonstrate that the dual cocatalysts decorating the BT nanoparticles not only effectively retard the photoinduced charge recombination but also significantly vary the surface chemical feature to promote the adsorption/activation of the reactants (CO₂/H₂O). In addition, the Ag nanoparticles can broaden the spectral response region, while the MnO_x cocatalyst can promote the CH₄ product selectivity and the water oxidation reaction. The synergistic effect of Ag/MnO_x dual cocatalysts on the BT nanoparticles renders a remarkably boosted CO₂RR performance, which provides a simple yet general synthesis strategy for brookite titania-based photocatalysts with high-performance solar-driven CO₂ conversion.

Efficient and Selective Interplay Revealed: CO2 Reduction to CO over ZrO2 by Light with Further Reduction to Methane over Ni0 by Heat Converted from Light

The reaction mechanism of CO₂ photoreduction into methane was elucidated by time-course monitoring of the mass chromatogram, in situ FTIR spectroscopy, and in situ extended X-ray absorption fine structure (EXAFS). Under ¹³ CO₂ , H₂ , and UV/Vis light, ¹³ CH₄ was formed at a rate of 0.98 mmol h^-1  g_cat ^-1 using Ni (10 wt %)-ZrO₂ that was effective at 96 kPa. Under UV/Vis light irradiation, the ¹³ CO₂ exchange reaction and FTIR identified physisorbed/chemisorbed bicarbonate and the reduction because of charge separation in/on ZrO₂ , followed by the transfer of formate and CO onto the Ni surface. EXAFS confirmed exclusive presence of Ni⁰ sites. Then, FTIR spectroscopy detected methyl species on Ni⁰ , which was reversibly heated to 394 K owing to the heat converted from light. With D₂ O and H₂ , the H/D ratio in the formed methane agreed with reactant H/D ratio. This study paves the way for using first row transition metals for solar fuel generation using only UV/Vis light.

Construction of a Z-scheme heterojunction for high-efficiency visible-light-driven photocatalytic CO2 reduction

The continuous growth of fossil fuel consumption and large amounts of CO2 emissions have caused global energy crisis and climate change. The employment of semiconductor photocatalysts to convert CO2 into value-added products has attracted extensive attention and research worldwide in recent years. However, it is difficult for a single-component semiconductor photocatalyst to achieve this goal efficiently due to its drawbacks, such as low quantum efficiency, limited surface area, limited number of active sites, the short lifetime of photogenerated carriers, poor long-term stability, and the weak redox ability of carriers. Fortunately, inspired by photosynthesis, the construction of an artificial Z-scheme heterojunction has brought a new dawn for the realization of this goal. The Z-scheme heterojunction has a high separation efficiency of electron-hole pairs with strong redox ability and a wide light response range. The abovementioned advantages make the Z-scheme heterojunction provide a great opportunity for the conversion of CO2 to value-added chemicals. This review concisely reports the progress of the Z-scheme heterojunction in the field of photocatalytic CO2 reduction in recent years, photocatalytic mechanism, choice of oxidation and reduction systems, strategies for improving efficiency, confirmation of the Z-scheme charge transport mechanism, problems and challenges, and the prospects for the future.

Ag and TiO2 nanoparticles co-modified defective zeolite TS-1 for improved photocatalytic CO2 reduction

Photocatalytic CO₂ reduction into fuels has been an attractive research topic. Herein, Ag and TiO₂ nanoparticles co-loaded zeolite TS-1 (Ag-TiO₂/TS-1) were synthesized by the ion-exchange and subsequently in-situ photodeposition method. The obtained Ag-TiO₂/TS-1 sample has a high surface area and rich Ti³⁺-V_o defects and as well as highly dispersed Ag nanoparticles. As expected, the sample Ag-TiO₂/TS-1 not only shows high CO₂ adsorption capacity, but also improves the separation efficiency of photogenerated electron-hole pairs. As a result, only CO and CH₄ can be detected on the sample Ag-TiO₂/TS-1 in the photocatalytic CO₂ conversion, and the competing H₂ evolution can be completely suppressed, suggestive of its high selectivity. The super photocatalytic activity toward CO₂ reduction can be ascribed to the synergistic effect among highly dispersed Ag nanoparticle, the support zeolite TS-1 and TiO₂ with highly exposed {101} planes.

Plasmonic Photocatalysts for Sunlight-Driven Reduction of CO2 : Details, Developments, and Perspectives

Plasmonic photocatalysis is among the most efficient processes for the photoreduction of CO₂ into valuable fuels. The formation of localized surface plasmon resonance (LSPR), energy transfer, and surface reaction are the significant steps in this process. LSPR plays an essential role in the performance of plasmonic photocatalysts as it promotes an excellent, light absorption over a broad wavelength range while simultaneously facilitating an efficient energy transfer to semiconductors. The LSPR transfers energy to a semiconductor through various mechanisms, which have both advantages and disadvantages. This work points out four critical features for plasmonic photocatalyst design, that is, plasmonic materials, size, shape of plasmonic nanoparticles (PNPs), and the contact between PNPs and semiconductor. Various developed plasmonic photocatalysts, as well as their photocatalytic performance in CO₂ photoreduction, are reviewed and discussed. Finally, perspectives of advanced architectures and structural engineering for plasmonic photocatalyst design are put forward with high expectations to achieve an efficient CO₂ photoreduction shortly.

Cobalt Plasmonic Superstructures Enable Almost 100% Broadband Photon Efficient CO2 Photocatalysis

The efficiency of heterogeneous photocatalysis for converting solar to chemical energy is low on a per photon basis mainly because of the difficulty of capturing and utilizing light across the entire solar spectral wavelength range. This challenge is addressed herein with a plasmonic superstructure, fashioned as an array of nanoscale needles comprising cobalt nanocrystals assembled within a sheath of porous silica grown on a fluorine tin oxide substrate. This plasmonic superstructure can strongly absorb sunlight through different mechanisms including enhanced plasmonic excitation by the hybridization of Co nanoparticles in close proximity, as well as inter- and intra-band transitions. With nearly 100% sunlight harvesting ability, it drives the photothermal hydrogenation of carbon dioxide with a 20-fold rate increase from the silica-supported cobalt catalyst. The present work bridges the gap between strong light-absorbing plasmonic superstructures with photothermal CO₂ catalysis toward the complete utilization of the solar energy.

Synergistic ultraviolet and visible light photo-activation enables intensified low-temperature methanol synthesis over copper/zinc oxide/alumina

Although photoexcitation has been employed to unlock the low-temperature equilibrium regimes of thermal catalysis, mechanism underlining potential interplay between electron excitations and surface chemical processes remains elusive. Here, we report an associative zinc oxide band-gap excitation and copper plasmonic excitation that can cooperatively promote methanol-production at the copper-zinc oxide interfacial perimeter of copper/zinc oxide/alumina (CZA) catalyst. Conversely, selective excitation of individual components only leads to the promotion of carbon monoxide production. Accompanied by the variation in surface copper oxidation state and local electronic structure of zinc, electrons originating from the zinc oxide excitation and copper plasmonic excitation serve to activate surface adsorbates, catalysing key elementary processes (namely formate conversion and hydrogen molecule activation), thus providing one explanation for the observed photothermal activity. These observations give valuable insights into the key elementary processes occurring on the surface of the CZA catalyst under light-heat dual activation.

Investigation of copper oxidation states in plasmonic nanomaterials by XAS and Raman spectroscopy

A shell-isolated nanoparticle enhanced surface Raman technique and XANES for detection of copper(ii) or copper(i) plasmonic-nanocatalysts.

Industrial carbon dioxide capture and utilization: state of the art and future challenges

This review covers the sustainable development of advanced improvements in CO₂ capture and utilization.