Topology Exploration in Highly Connected Rare-Earth Metal–Organic Frameworks via Continuous Hindrance Control

Rare Earth -MOFs: From Synthesis to Their Deployment for Amine-Sensing Application in Aqueous Media

The pursuit of developing sensors, characterized by their fluorescence-intensity enhancement or "turn-on" behavior, for accurately detecting noxious small molecules, such as amines, at minimal levels remains a significant challenge. Metal-organic frameworks (MOFs) have emerged as promising candidates as sensors as a result of their diverse structural features and tunable properties. This study introduces the rational synthesis of a new highly coordinated (6,12)-connected rare earth (RE) alb-MOF-3, by combining the nonanuclear 12-connected hexagonal prismatic building units, [RE9(μ3-O)2(μ3-X)12(OH)2(H2O)7(O2C-)12], with the 6-connected rigid trigonal prismatic extended triptycene ligand. The resulting Y-alb-MOF-3 material is distinguished by its high microporosity and Brunauer-Emmett-Teller surface area of approximately 1282 m2/g, which offers notable hydrolytic stability. Remarkably, it demonstrates selective detection capabilities for primary aliphatic amines in aqueous media, as evidenced by fluorescence turn-on behavior and photoluminescence (PL) titration measurements. This work emphasizes the potential of MOFs as sensors in advancing their selectivity and sensitivity toward various analytes.

Highly stable lanthanide(III) metal-organic frameworks as ratiometric fluorescence sensors for vitamin B6

Three lanthanide(III)-based metal-organic frameworks, formulated as [(CH3)2NH2]2[Ln6(μ3-OH)8(EBTC)3(H2O)6]·4H2O·2DMF (Ln = Eu (1), Tb (2) and Ce (3)), were synthesized using a rigid tetracarboxylate organic ligand (1,1'-ethynebenzene-3,3',5,5'-tetracarboxylic acid, H4EBTC). Complexes 1-3 possess 12-connected hexanuclear [Ln6(μ3-OH)8(OOC-)12(H2O)6] clusters with the ftw topology, which were stable in water and acid/alkaline aqueous solution. Due to the antenna effect, complexes 1 and 2 presented double fluorescence emission peaks, which are the characteristic emission peaks of Ln3+ ions and the ligand H4EBTC, respectively. The doped bimetallic EuxTb1--x-MOFs were obtained by tuning the Eu(III)/Tb(III) ratio during the reaction, which exhibited a colour change from red, orange, and yellow to green. Furthermore, complexes 1, 2 and Eu2Tb8-MOF as ratiometric fluorescence sensors exhibited excellent sensing ability for vitamin B6 (VB6) in phosphate buffer solution (pH = 7.35) and real samples with high selectivity and reusability. The low detection limit (LOD) values were calculated to be 1.03 μM for complex 1, 0.25 μM for complex 2 and 0.11 μM for Eu2Tb8-MOF in aqueous solution. Finally, a visual film based on Ln-MOF@SA was prepared to detect VB6 with high reusability.

Ortho Effects of Tricarboxylate Linkers in Regulating Topologies of Rare-Earth Metal-Organic Frameworks

A linker design strategy is developed to attain novel polynuclear rare-earth (RE) metal-organic frameworks (MOFs) with unprecedented topologies. We uncover the critical role of ortho-functionalized tricarboxylate ligands in directing the construction of highly connected RE MOFs. The acidity and conformation of the tricarboxylate linkers were altered by substituting with diverse functional groups at the ortho position of the carboxyl groups. For instance, the acidity difference between carboxylate moieties resulted in forming three hexanuclear RE MOFs with novel (3,3,3,10,10)-c wxl, (3,12)-c gmx, and (3,3,3,12)-c joe topologies, respectively. In addition, when a bulky methyl group was introduced, the incompatibility between the net topology and ligand conformation guided the co-appearance of hexanuclear and tetranuclear clusters, generating a novel 3-periodic MOF with a (3,3,8,10)-c kyw net. Interestingly, a fluoro-functionalized linker prompted the formation of two unusual trinuclear clusters and produced a MOF with a fascinating (3,8,10)-c lfg topology, which could be gradually replaced by a more stable tetranuclear MOF with a new (3,12)-c lee topology with extended reaction time. This work enriches the polynuclear clusters library of RE MOFs and unveils new opportunities to construct MOFs with unprecedented structural complexity and vast application potential.

Tetra-Nuclear Cluster-Based Lanthanide Metal-Organic Frameworks as White Phosphor, Information Encryption, Self-Calibrating Thermometers, and Fe2+ Sensors

The application of one kind of metal-organic framework (MOF) material used in multiple fields is one of the most interesting research topics. In this work, four new tetra-nuclear cluster-based lanthanide metal-organic frameworks (LnMOFs) [Ln₂(BTDB)₃(DMA)(phen)]_n (Ln = Tb TbMOF, Eu EuMOF, Gd GdMOF, Tb_1.830Eu_0.170 Tb,EuMOF, 3,5-bis(trifluoromethyl)-4',4″-dicarboxytriphenylamine = H₂BTDB, 1,10-phenanthroline = phen) are obtained based on the ligand of H₂BTDB that is synthesized in our laboratory, and the precise single-crystal structure of H₂BTDB is obtained for the first time. The white phosphor was obtained by facilely hybridizing two components of the orange-yellow emission phosphor of Tb,EuMOF and the blue luminescence material of triphenylamine according to the trichromatic theory. At the same time, TbMOF, EuMOF, Tb,EuMOF, and the white phosphor can be used for information encryption, demonstrating their potential application in the field of anti-counterfeiting. Tb,EuMOF is also a multi-mode and self-calibrating thermometer within a broad temperature range of 110-300 K. Further studies show that EuMOF is a rapid response sensor for Fe²⁺, with a very low limit of detection of 2.0 nM, which is much lower than the national standards for Fe²⁺ (GB 5749-2005, 5.357 μM). It can achieve strong anti-interference detection of Fe²⁺ in actual samples of tap water and lake water. In addition, EuMOF can also be made into an easy-to-use sensing device of test paper for real-time and visual sensing of Fe²⁺.

Boosting the C2H2/CO2 Separation Performance of Metal-Organic Frameworks through Fluorine Substitution

A pair of metal-organic frameworks (MOFs) of JXNU-15 (formulated as [Co₆(μ₃-OH)₆(BTB)₂(BPY)₃]_n, BTB^3- = benzene-1,3,5-tribenzoate and BPY = 4,4'-bipyridine) and its fluorinated JXNU-15(F) ([Co₆(μ₃-OH)₆(SFBTB)₂(BPY)₃]_n) based on the fluorous 1,3,5-tri(3,5-bifluoro-4-carboxyphenyl)benzene (SFBTB^3-) ligands were presented. The detailed comparisons of the acetylene/carbon dioxide (C₂H₂/CO₂) separation abilities between the isostructural JXNU-15(F) and JXNU-15 were presented. In comparison with the parent JXNU-15, the higher C₂H₂ uptake, larger adsorption selectivity of the C₂H₂/CO₂ (50/50) mixture, and enhanced C₂H₂/CO₂ separation performance endow JXNU-15(F) with highly efficient C₂H₂/CO₂ separation performance, which is demonstrated by singe-component gas adsorptions and dynamic gas mixture breakthrough experiments. The fluorine substituents exert the crucial effects on the enhanced C₂H₂/CO₂ separation ability of JXNU-15(F) and play the dominant role in the C₂H₂-framework interactions, as uncovered by computational simulations. This work illustrates a powerful fluorine substitution strategy for boosting C₂H₂/CO₂ separation ability for MOFs.

Tetranuclear CuII Cluster as the Ten Node Building Unit for the Construction of a Metal-Organic Framework for Efficient C2 H2 /CO2 Separation

Rational design of high nuclear copper cluster-based metal-organic frameworks has not been established yet. Herein, we report a novel MOF (FJU-112) with the ten-connected tetranuclear copper cluster [Cu₄ (PO₃ )₂ (μ₂ -H₂ O)₂ (CO₂ )₄ ] as the node which was capped by the deprotonated organic ligand of H₄ L (3,5-Dicarboxyphenylphosphonic acid). With BPE (1,2-Bis(4-pyridyl)ethane) as the pore partitioner, the pore spaces in the structure of FJU-112 were divided into several smaller cages and smaller windows for efficient gas adsorption and separation. FJU-112 exhibits a high separation performance for the C₂ H₂ /CO₂ separation, which were established by the temperature-dependent sorption isotherms and further confirmed by the lab-scale dynamic breakthrough experiments. The grand canonical Monte Carlo simulations (GCMC) studies show that its high C₂ H₂ /CO₂ separation performance is contributed to the strong π-complexation interactions between the C₂ H₂ molecules and framework pore surfaces, leading to its more C₂ H₂ uptakes over CO₂ molecules.

Synthesis of Fluoro-Bridged Ho3+ and Gd3+ 1,3,5-Tris(4-carboxyphenyl)benzene Metal-Organic Frameworks from Perfluoroalkyl Substances

A new fluoro-bridged rare-earth (RE) metal-organic framework consisting of 15-connected nonanuclear and 9-connected trinuclear clusters {[RE₉-(μ₃-F)₁₄(H₂O)₆][RE₃(μ₃-F)(H₂O)₃](HCO₂)₃-(BTB)₆}·(solvent)x 2 (RE = Ho³⁺ and Gd³⁺) was synthesized through the transformation of a dimeric complex formulated as bis(2,2'-bipyridine)tetrakis(μ-2-fluorobenzoato-O,O')-bis(2-fluorobenzoato)diRE(III) 1 with the bridging linker 1,3,5-tris(4-carboxyphenyl)benzene (H₃BTB). The rare-earth metal ions Ho³⁺ and Gd³⁺ were also found to remove fluorine from other organo-fluorine compounds such as perfluorohexanoic acid (PFHxA) and perfluorooctanoic acid (PFOA), resulting in the new fluoro-bridged RE-MOFs.

Fe-MOF with U-Shaped Channels for C2H2/CO2 and C2H2/C2H4 Separation

The development of high-performance adsorbents is critical for the low-energy separation of acetylene. Herein, we synthesized an Fe-MOF (MOF, metal-organic framework) with U-shaped channels. The adsorption isotherms of C₂H₂, C₂H₄, and CO₂ show that the adsorption capacity of acetylene is significantly larger than that of the other two gases. Meanwhile, the actual separation performance was verified by breakthrough experiments, indicating the potential to separate C₂H₂/CO₂ and C₂H₂/C₂H₄ mixtures at normal temperatures. Grand Canonical Monte Carlo (GCMC) simulation demonstrates that the framework with U-shaped channels interacts more strongly with C₂H₂ than with C₂H₄ and CO₂. The high C₂H₂ uptake and low adsorption enthalpy highlight Fe-MOF as a promising candidate for C₂H₂/CO₂ separation with a low regeneration energy.

Ligand Conformation Fixation Strategy for Expanding the Structural Diversity of Copper-Tricarboxylate Frameworks and C2H2 Purification Performance Studies

Structural and functional expansion of metal-organic frameworks (MOFs) is fundamentally important because it not only enriches the structural chemistry of MOFs but also facilitates the full exploration of their application potentials. In this work, by employing a dual-site functionalization strategy to lock the ligand conformation, we designed and synthesized a pair of biphenyl tricarboxylate ligands bearing dimethyl and dimethoxy groups and fabricated their corresponding framework compounds through coordination with copper(II) ions. Compared to the monofunctionalized version, introduction of two side groups can significantly fix the ligand conformation, and as a result, the dual-methoxy compound exhibited a different network structure from the mono-methoxy counterpart. Although only one almost orthogonal conformation was observed for the two ligands, their coordination framework compounds displayed distinct topological structures probably due to different solvothermal conditions. Significantly, with a hierarchical cage-type structure and good hydrostability, the dimethyl compound exhibited promising practical application value for industrially important C₂H₂ separation and purification, which was comprehensively demonstrated by equilibrium/dynamic adsorption measurements and the corresponding Clausius-Clapeyron/IAST/DFT theoretical analyses.

Expanding the Structural Topologies of Rare-Earth Porphyrinic Metal-Organic Frameworks through Ligand Modulation

Expanding the structural diversity of porphyrinic metal-organic frameworks (PMOFs) is essential to develop functional materials with novel properties or enhanced performance in different applications. Herein, we establish a strategy to construct rare-earth (RE) PMOFs with unprecedented topology via rational functionalization of porphyrinic ligands. By introducing phenyl/pyridyl groups to the meso-positions of the porphyrin core, the symmetries and connectivities of the ligands are tuned, and three RE-PMOFs (BUT-224/-225/-226) with new topologies are successfully obtained. In addition, BUT-225(Co), with both the Lewis basic and acidic sites, exhibits enhanced CO₂ uptake and higher catalytic activity for the cycloaddition of CO₂ and epoxides under mild conditions. This work reveals that the RE-PMOFs with novel topologies can be rationally designed and constructed through ligand functionalization, which provides insights into the construction of tailored PMOFs for various applications.

Water-Stable Cd-MOF with fluorescent sensing of Tetracycline, Pyrimethanil, abamectin benzoate and construction of logic gate

Due to the indiscriminate abuse of pesticides and antibiotics has caused serious threats to the environment and human and animal bodies, the detection of antibiotics and pesticides has attracted widespread attention in recent years. Herein, a novel 2D Cd (II)-MOF, [Cd(L)_0.5(1,2-bimb)] (Cd-L-1,2-bimb), [H₄L = 1, 1'-ethylbiphenyl -3, 3', 5, 5'- tetracarboxylic acid, 1, 2-bimb = 1, 2-bis[(1H-imidazol-1-yl) methyl] benzene] is synthesized. Cd-L-1,2-bimb has excellent stability in different organic solvents and in the range of pH 1.1-12.5. Cd-L-1,2-bimb exhibits high selectivity, high sensitivity, and fast luminescent response to pesticides [pyrimethanil (PTH, LOD = 2.2 μM) and abamectin benzoate (AMB, LOD = 2.39 μM)] and antibiotic contaminants tetracycline (TET, LOD = 0.13 μM). Cd-L-1,2-bimb displays discriminative fluorescence when detecting AMB and PTH, and is an implication logic gate. Finally, the possible detection mechanism of Cd-L-1,2-bimb toward different pollutants is also further investigated. This MOF-based multifunctional sensor opens up new prospects for environmental monitors.

Tunable rare-earth metal-organic frameworks for ultra-high selenite capture

Linkers and clusters with various conformations present challenges for the design and prediction of highly porous and stable rare-earth metal-organic frameworks (RE-MOFs) for trapping toxic ions in aqueous solutions. Herein, we designed and synthesized a series of RE-MOFs based on a malleable ligand to explore the effects of ligands, clusters, and configurations on structural stability. The results showed that the nonanuclear high-connected UPC-183 exhibited better stability than the hexanuclear low-connected RE-MOF (UPC-181/182 series). Due to the syngenetic effect of chemi- and physisorption, the adsorption capacity of UPC-183-Eu for selenite (SeO₃^2-) is as high as 308.39 mg/g, recorded one of the highest ever reported for MOFs. Furthermore, we accurately analyzed the adsorption site of UPC-183-Eu for SeO₃^2- through single-crystal structure and theoretical simulation. The ultra-high selenite adsorption capacity and removal efficiency endow UPC-183-Eu an excellent porous adsorbent for removing pollutants.

Accessing 14-Connected Nets: Continuous Breathing, Hydrophobic Rare-Earth Metal Organic Frameworks Based on 14-c Hexanuclear Clusters with High Affinity for Non-Polar Vapors

Highly connected metal organic frameworks (MOFs) in which at least one building block has connectivity higher than twelve are very rare and much desirable. We report here the first examples of isostructural 14-connected MOFs, RE-frt-MOF-1, constructed from the assembly of 14-c hexanuclear rare-earth clusters, [RE₆(μ₃-X)₈(COO)₁₂]^2- (RE: Y³⁺, Tb³⁺, Dy³⁺, Ho³⁺, Er³⁺, Yb³⁺ and X: OH^-/F^-) with a tritopic carboxylate-based organic linker. This linker serves as a 3-c and 4-c organic node resulting in the formation of a unique, trinodal (3,4,14)-c framework. RE-frt-MOF-1 are stable in air and alkaline aqueous solutions and show an intriguingly continuous, reversible breathing behavior, between a wide and a narrow-pore phase, upon guest removal. Crystallinity is retained during breathing, and single-crystal X-ray diffraction shed light into the associated structural transformation. Vapor sorption studies performed on Y-frt-MOF-1 revealed a high affinity for non-polar vapors such as n-hexane, cyclohexane, and benzene, displaying type I isotherms with high uptake at low relative pressures (<10^-3 p/p₀), associated with the hydrophobic nature of the 1D channels and also with their rhombic shape. In contrast, polar vapors such as acetonitrile and ethanol show type V isotherms due to favorable vapor-vapor interactions. Notably these vapors, except cyclohexane, trigger the transition from the narrow to the wide pore phase, accompanied by a remarkable increase in uptake, reaching 70.6, 109, 100.4, and 87.7% for n-hexane, benzene, acetonitrile, and ethanol, respectively.

Exploration of Hierarchical Metal-Organic Framework as Ultralight, High-Strength Mechanical Metamaterials

Due to the extraordinarily high surface to volume ratio and enormous structural and chemical diversities, metal-organic frameworks (MOFs) have drawn much attention in applications such as heterogeneous catalysis, gas storage separation, and drug delivery, and so on. However, the potential of MOF materials as mechanical metamaterials has not been investigated. In this work, we demonstrated that through the concerted effort of molecular construct and mesoscopic structural design, hierarchical MOFs can exhibit superb mechanical properties. With the cutting-edge in situ transmission and scanning electron microscope (TEM and SEM) techniques, the mechanical properties of hollow UiO-66 octahedron particles were quantitatively studied by compression on individual specimens. Results showed that the yield strength and Young's modulus of the hierarchical porous framework material presented a distinct "smaller is stronger and stiffer" size dependency, and the maximum yield strength and Young's modulus reached 580 ± 55 MPa and 4.3 ± 0.5 GPa, respectively. The specific strengths were measured as 0.15 ± 0.03 to 0.68 ± 0.11 GPa g^-1 cm³, which is comparable to the previously reported state-of-the-art mechanical metamaterials like glassy carbon nanolattices and pyrolytic carbon nanolattices. This work revealed that MOF materials can be made into a new class of low-density, high-strength mechanical metamaterials and provided insight into the mechanical stability of nanoscale MOFs for practical applications.

A Benzothiadiazole-Based Eu3+ Metal-Organic Framework as the Turn-On Luminescent Sensor toward Al3+ and Ga3+ with Potential Bioimaging Application

The design and preparation of novel multifunctional lanthanide metal-organic frameworks (Ln-MOFs) have been arisen widespread attention. In particular, Ln-MOFs have shown great luminescence potential in chemical sensing. Herein, a new benzothiadiazole-based Eu-MOF {[(CH₃)₂NH₂][Eu(BTDB)₂]·2H₂O}_n (JXUST-11) was obtained based on 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid (H₂BTDB), which exhibits a chain-based three-dimensional framework. Moreover, JXUST-11 is considered as a photoluminescent sensor to identify Al³⁺ and Ga³⁺ ions by fluorescence enhancement with the detection limits of 2.9 and 10.2 ppm, severally. Importantly, Al³⁺ and Ga³⁺ can be discerned with the naked eye by color change under a natural lamp. In addition, a portable MOF film based on JXUST-11 was developed for Al³⁺ and Ga³⁺ detection. This is the first Ln-MOF that can be employed as a naked-eye fluorescent probe to identify Ga³⁺. Interestingly, JXUST-11 is also capable of detecting Al³⁺ and Ga³⁺ in living cells.

Micropore Regulation in Ultrastable [Sc3O]-Organic Frameworks for Acetylene Storage and Purification

High storage capacity, high separation selectivity, and high structure stability are essential for an idea gas adsorbent. However, it is not easy to achieve all three at the same time, even for the promising metal-organic framework (MOF) adsorbents. We demonstrate herein that robust [Sc₃O]-organic frameworks could be regulated by a micropore combination strategy for high-performance acetylene adsorption. Under the same solvent system with formic acid as a modulator, similar tritopic ligands extend [Sc₃O(COO)₆] trigonal-prismatic clusters to generate SNNU-5-Sc and SNNU-150-Sc adsorbents. Notably, the two Sc-MOFs can keep their architectures over 24 h in water at different pH values (2-12) or at 90 °C. Modulated by the linker symmetry, the final stacking metal-organic polyhedral cages produce open window sizes of about 10 Å for SNNU-5-Sc and 5 Å + 7 Å for SNNU-150-Sc. Due to such micropore combinations, SNNU-5-Sc exhibits a top-level C₂H₂ uptake of 211.2 cm³ g^-1 (1 atm and 273 K) and SNNU-150-Sc shows high C₂H₂/CH₄, C₂H₂/C₂H₄, and C₂H₂/CO₂ selectivities of 80.65, 4.03, and 8.19, respectively, under ambient conditions. Dynamic breakthrough curves obtained on a fixed-bed column and grand canonical Monte Carlo (GCMC) simulations further support their prominent acetylene storage and purification performance. High framework stability, storage capacity, and separation selectivity make SNNU-5-Sc and SNNU-150-Sc ideal acetylene adsorbents in practical applications.

Morphologically Flex Sm-MOF Based Electrochemical Immunosensor for Ultrasensitive Detection of a Colon Cancer Biomarker

Despite having the potential to synthesize stable metal-organic frameworks (MOFs), rare earth metal-based MOFs have not been exploited extensively. Owing to the high coordination numbers, the MOFs can generate a suitable coordination environment for various applications. Herein, samarium (Sm)-based MOFs were synthesized with three different organic linkers, namely, trimesic acid (TMA), meso-tetra(4-carboxyphenyl)porphine (TCPP), and 1,3,6,8-tetra(4-carboxylphenyl) pyrene(TBPy) by the solvothermal approach. The morphologies of Sm-TMA MOF, Sm-TCPP MOF, Sm-TBPy MOF were rod-shaped, cubic consisting of stacked 2D layers, and spherical made of small cubic structures, respectively. After the electrochemical properties of the synthesized MOFs were investigated, the MOFs were used to fabricate immunosensors for detection of carcinoembryonic antigen using a label-free signaling strategy. The immunosensors exhibited a wide linear detection range and a lower detection limit. The exhibited reproducibility and selectivity of the immunosensors were within the tolerable limits. The established label-free immunosensor has been successfully applied for detection of carcinoembryonic antigen in human serum samples, demonstrating that the rare earth metal-based MOFs are promising for construction of biosensors for medical diagnosis.

A Copper-Based Metal-Organic Framework with Suitable Pore Environment for Effective Ethylene Purification

Purifying ethylene from acetylene/ethylene mixture is feasible but challenging because of their similar physical properties. Herein, we synthesized a copper-based metal-organic framework (MOF), namely Complex 1, that can preferentially adsorb...

2-Dimensional rare earth metal–organic frameworks based on a hexanuclear secondary building unit as efficient detectors for vapours of nitroaromatics and volatile organic compounds

A new family of microporous 2-dimensional rare earth metal organic frameworks based on a hexanuclear secondary building unit with capability to selectively detect vapours of volatile organic compounds and nitroaromatic explosives is reported.

Fluoro-Bridged Clusters in Rare-Earth Metal-Organic Frameworks

The modulator 2-fluorobenzoic acid (2-fba) is widely used to prepare RE clusters in metal-organic frameworks (MOFs). In contrast to known RE MOF structures containing hydroxide bridging groups, we report for the first time the possible presence of fluoro bridging groups in RE MOFs. In this report we discuss the synthesis of a holmium-UiO-66 analogue as well as a novel holmium MOF, where evidence of fluorinated clusters is observed. The mechanism of fluorine extraction from 2-fba is discussed as well as the implications that these results have for previously reported RE MOF structures.

A family of lanthanide metal-organic frameworks based on a redox-active tetrathiafulvalene-dicarboxylate ligand showing slow relaxation of magnetisation and electronic conductivity

The reaction of the redox-active tetrathiafulvalene ligand and lanthanide ions is an important approach to prepare photo-electro-magnetic multifunctional metal-organic framework materials. A series of isostructural lanthanide metal-organic frameworks (Ln-MOFs) based on the in situ generated tetrathiafulvalene dicarboxylate (TTF-DC) ligand, {[Ln₄(TTF-DC)₆(DMF)₄(H₂O)₂]·4DMF}_n (Ln = Gd (1-Gd), Tb (1-Tb), Dy (1-Dy) and Er (1-Er)), was synthesized and characterized. These Ln-MOFs display tunable redox-active properties and semiconductor performance, and their electronic conductivities have been significantly improved after oxidation. All MOFs except 2-Tb exhibit slow magnetic relaxation under an applied dc field. 1-Dy and 2-Dy show field-induced single-molecule magnet (SMM) behaviour with energy barriers (U_eff) of 30.77 K (τ₀ = 5.23 × 10^-8) and 26.41 K (1.04 × 10^-8 s), respectively.

Incorporation of Chromophores into Metal-Organic Frameworks for Boosting CO2 Conversion

The exploitation of highly stable and active catalysts for the conversion of CO₂ into valuable fuels is desirable but is a great challenge. Herein, we report that the incorporation of chromophores into metal-organic frameworks (MOFs) could afford robust catalysts for efficient CO₂ conversion. Specifically, a porous Nd(III) MOF (Nd-TTCA; TTCA^3- = triphenylene-2,6,10-tricarboxylate) was constructed by incorporating one-dimensional Nd(CO₂)_n chains and TTCA^3- ligands, which exhibits a very high stability, retaining its framework not only in the air at 300 °C for 2 h but also in boiling aqueous solutions at pH 1-12 for 7 days. More importantly, Nd-TTCA has achieved a 5-fold improvement in photocatalytic activity for reducing CO₂ to HCOOH and a 10-fold improvement in catalytic activity for the cycloaddition of CO₂ into cyclic carbonate in comparison to those of H₃TTCA itself. This work gives a new strategy to design efficient artificial crystalline catalysts for CO₂ conversion.

Metal-Organic Frameworks Featuring 18-Connected Nonanuclear Rare-Earth Oxygen Clusters and Cavities for Efficient C2H2/CO2 Separation

Two rare-earth (RE) metal-organic frameworks (MOFs) formulated as {(Me₂NH₂)₂[RE₉(μ₃-OH)₈(μ₂-OH)₃(DCPB)₆(H₂O)₃]}_n (RE = Y³⁺ and Tb³⁺; termed JXNU-10) built from a triangular 3,5-di(4'-carboxylphenyl)benzoic acid (DCPB^3-) ligand are presented. JXNU-10 features the rarely observed 18-connected nonanuclear [RE₉(μ₃-OH)₈(μ₂-OH)₃] clusters, one-dimensional-nanosized tubular channels, and trigonal-bipyramidal cavities. The presence of the high-nuclear RE-oxo clusters and the robust coordination bonds between the highly charged RE ions and the hard base of the carboxylate/hydroxyl oxygen atoms yielded the water-resistant JXNU-10 materials. JXNU-10 exhibits highly selective sorption of C₂H₂ over CO₂ and highly efficient separation of a C₂H₂ and CO₂ mixture. The carboxylate oxygen atoms and the rich π systems of the organic ligands on the pore walls are the desirable binding sites for a C₂H₂ molecule with acidic hydrogen atoms and an alkyne group, facilitating the excellent efficiency of JXNU-10 for C₂H₂/CO₂ separation demonstrated by breakthrough experiments.

Synthesis, crystal structure and magnetic properties of poly[[diaqua{μ6-2-[bis-(carboxyl-atometh-yl)amino]-terephthalato}-dicobalt(II)] 1.6-hydrate]

The asymmetric unit of the polymeric title compound {[Co2(C12H7NO8)(H2O)2]·1.6H2O} n comprises two CoII ions, which are coordinated by fully deprotonated 2-aminodi-acetic terephthalic acid (adtp4-) and terminal water mol-ecules in distorted octa-hedral N1O5 and O6 coordination environments. The title compound features tetra-nuclear CoII units bridged by κ 3 O:O:O'- and κ 3 O:O,O'-carboxyl-ate groups, which are joined into ribbons via syn-anti carboxyl-ate bridges. The parallel adtp4- ligands with an alternately reversed arrangement further link adjacent CoII ribbons into (010) layers, which are assembled into a three-dimensional supra-molecular network via inter-molecular hydrogen bonds. The disordered water solvent mol-ecules are situated in channels parallel to [100]. Magnetic measurements and analyses reveal that the title compound displays anti-ferromagnetic behaviour. The purity of the title compound was characterized by X-ray powder diffraction.

Snapshots of Postsynthetic Modification in a Layered Metal-Organic Framework: Isometric Linker Exchange and Adaptive Linker Installation

Terminal ligand exchange and framework linker exchange have been frequently practiced as powerful tools to functionalize reticular structures such as metal-organic frameworks (MOFs). Herein, we report the postsynthetic modification (PSM) of a 6-connected layered MOF (hxl topology) to achieve a 12-connected fcu framework. In the PSM process, isometric linker exchange in the layers and linker installation between adjacent layers by the substitution of modulating ligands happen simultaneously. Snapshots of PSM at different time points reveal that the hxl domain is adaptively reorganized to create sites for new linker installation, and gradually the fcu domain dominates the crystal. Detailed kinetic analysis suggests that, although adaptive linker installation requires interlayer expansion of stackings in situ, it is kinetically faster than isometric linker exchange in the layers.

Metal Exchange Boosts the CO2 Selectivity of Metal Organic Frameworks Having Zn-Oxide Nodes

A large number of metal organic frameworks (MOFs) synthesized to date have nodes with a Zn metal, and a detailed understanding of their gas separation efficiency upon metal exchange is needed to pave the way for designing the next generation of MOFs. In this work, we implemented a protocol to identify MOFs with Zn nodes out of 10,221 MOFs and classified them into two main groups. Depending on the pore properties and adsorption selectivities, two MOFs from IRMOFs and two MOFs from ZnO-MOFs were selected. The metal atom (Zn) of the selected four MOFs was exchanged with eight different metals (Cd, Co, Cr, Cu, Mn, Ni, Ti, and V), and 32 different metal-exchanged MOFs (M-MOFs) were obtained. By performing grand canonical Monte Carlo simulations, we investigated the influence of the metal type on the CO2/H2 and CO2/CH4 separation performances of these 32 M-MOFs. Physical properties of the MOFs such as the pore size and surface area, and chemical properties such as the partial charges of the atoms in the framework were investigated to understand the effect of metal exchange on the gas adsorption and separation performances of materials. Exchange of Zn with V and Cr led to a remarkable increase in the CO2 uptakes of selected MOFs and these increases were reflected on the adsorption selectivity, working capacity, and the adsorbent performance score of MOFs. The exchange of Zn with V increased the selectivity of one of the MOFs from 119 to 355 and the adsorbent performance score from 70 to 444 mol/kg, while for another MOF, exchange of Zn with Cr increased the selectivity from 161 to 921 and the adsorbent performance score from 162 to 1233 mol/kg under the condition of vacuum swing adsorption. The molecular level insights we provided to explain the improvement in the gas separation performances of M-MOFs will serve as a guide to design materials with exceptional CO2 separation performances.

Remodelling a shp: Transmetalation in a Rare-Earth Cluster-Based Metal-Organic Framework

Postsynthetic modification of metal-organic frameworks (MOFs) is an important strategy for accessing MOF analogues that cannot be easily synthesized de novo. In this work, the rare-earth (RE) cluster-based MOF Y-CU-10 with shp topology was modified through transmetalation using a series of RE ions, including La(III), Nd(III), Eu(III), Tb(III), Er(III), Tm(III), and Yb(III). In all cases, metal exchange higher than 70% was observed, with reproducible results. All transmetalated materials were fully characterized and compared to the parent MOF Y-CU-10 with regard to crystallinity, surface area, and morphology. Additionally, single-crystal X-ray diffraction measurements were performed to provide further evidence of transmetalation occurring in the nonanuclear cluster nodes of the MOF.

Optimizing Fe-Based Metal-Organic Frameworks through Ligand Conformation Regulation for Efficient Dye Adsorption and C2 H2 /CO2 Separation

Regulating the structure of metal-organic frameworks (MOFs) by adjusting the ligands reasonably is expected to enhance the interaction of MOFs on special molecules/ions, which has significant application value for the selective adsorption of guest molecules. Herein, two tricarboxylic ligands H₃ L-Cl and H₃ L-NH₂ were designed and synthesized based on the ligand H₃ TTCA by replacing part of the benzene rings with C=C bonds and modifying the chlorine and amino groups on the 4-position of the benzene ring. Two 3D Fe-MOFs (UPC-60-Cl and UPC-60-NH₂ ) with the new topology types were constructed. As the C=C bonds of the ligands have flexible torsion angles, UPC-60-Cl features three types of irregular 2D channels, while UPC-60-NH₂ has a cage with two types of windows on the surface. The synergistic effect of unique channels and modification of functional groups endows UPC-60-Cl and UPC-60-NH₂ with high adsorption capacity for organic dyes. Compound UPC-60-Cl shows high adsorption capacity for CV (147.2 mg g^-1 ), RHB (100.3 mg g^-1 ), and MO (220.9 mg g^-1 ), whereas UPC-60-NH₂ exhibits selective adsorption of MO (158.7 mg g^-1 ). Meanwhile, based on the diverse pore structure and modification of active sites, UPC-60-Cl and UPC-60-NH₂ show the selective separation of equimolar C₂ H₂ /CO₂ . Therefore, reasonable regulation of organic ligands plays a significant role in guiding the structure diversification and performance improvement of MOFs.

Continuous Breathing Rare-Earth MOFs Based on Hexanuclear Clusters with Gas Trapping Properties

Guest responsive porous materials represent an important and fascinating class of multifunctional solids that have attracted considerable attention in recent years. An understanding of how these structures form is essential toward their rational design, which is a prerequisite for the development of tailor-made materials for advanced applications. We herein report a novel series of stable rare-earth (RE) MOFs that show a rare continuous breathing behavior and an unprecedented gas-trapping property. We used an asymmetric 4-c tetratopic carboxylate-based organic ligand that is capable of affording highly crystalline materials upon controlled reaction with RE cations. These MOFs, denoted as RE-thc-MOF-1 (RE: Y³⁺, Sm³⁺, Eu³⁺, Tb³⁺, Dy³⁺, Ho³⁺, and Er³⁺), feature hexanuclear RE₆ clusters that display a highly unusual connectivity and serve as unique 8-c hemi-cuboctahedral secondary building block, resulting in a new (3,3,8)-c thc topology. Extensive single-crystal to single-crystal structural analyses coupled with detailed gas (N₂, Ar, Kr, CO₂, CH₄, and Xe) and vapor (EtOH, CH₃CN, C₆H₆, and C₆H₁₄) sorption studies, supported by accurate theoretical calculations, shed light onto the unique swelling behavior. The results reveal a synergistic action involving steric effects, associated with coordinated solvent molecules and 2-fluorobenzoate (2-FBA) nonbridging ligands, as well as cation-framework electrostatic interactions. We were able to probe the individual role of the coordinated solvent molecules and 2-FBA ligands and found that both cooperatively control the gas-breathing and -trapping properties, while 2-FBA controls the vapor adsorption selectivity. These findings provide unique opportunities toward the design and development of tunable RE-based flexible MOFs with tailor-made properties.

Ligand-Conformer-Induced Formation of Zirconium-Organic Framework for Methane Storage and MTO Product Separation

In pursuit of novel adsorbents with efficient adsorptive gas storage and separation capabilities remains highly desired and challenging. Although the documented zirconium-tricarboxylate-based metal-organic frameworks (MOFs) have displayed a variety of topologies encompassing underlying and geometry mismatch ones, the employed organic linkers are exclusively rigid and poorly presenting one type of conformation in the resultant structures. Herein, a used and semirigid tricarboxylate ligand of H₃ TATAB was judiciously selected to isolate a zirconium-based spe-MOF after the preliminary discovery of srl-MOF. Single-crystal X-ray diffraction reveals that the fully deprotonated TATAB linker in spe-MOF exhibits two distinct conformers, concomitant with popular O_h and rare S₆ symmetrical Zr₆ molecular building blocks, generating an unprecedented (3,3,12,12)-c nondefault topology. Specifically, the spe-MOF exhibits structurally higher complexity, hierarchical micropores, open metal sites free and rich electronegative groups on the pore surfaces, leading to relatively high methane storage capacity without considering the missing-linker defects and efficient MTO product separation performance.

Synthetic approaches for accessing rare-earth analogues of UiO-66

Rare-earth (RE) analogues of UiO-66 with non-functionalised 1,4-benzenedicarboxylate linkers are synthesised for the first time, and a series of synthetic approaches is provided to troubleshoot the synthesis. RE-UiO-66 analogues are fully characterised, and demonstrate a high degree of crystallinity, high surface area and thermal stability, consistent with the UiO-66 archetype.

Structural Analysis and Controllable Fabrication of Two Pentazolate-Based 3D Topological Networks

Two novel sodium-pentazolate frameworks (namely, MPF-3 and MPF-4) were achieved by adding simple additives. MPF-3 exhibits an aesthetic three-dimensional (3D) framework with the zeolitic MTN topology, featuring Na₂₈N₈₀ and Na₂₀N₆₀ nanocages. In MPF-4, two left-handed helical chains construct enclosed homochiral channels filled with dimethyl sulfone molecules, which constitute a zeolite-like UNJ topology. Importantly, the preparation of these two compounds provides an effective experimental means to explore the unique symmetrical structure and multiple coordination modes of pentazolium anion and demonstrates that it is possible to regulate the crystal structure through appropriate additives.

An amino-functionalized three-dimensional cadmium metal–organic framework: Synthesis, characterization and excellent fluorescence sensing of Fe3+

An amino-functionalized three-dimensional cadmium metal–organic framework, [Cd1.5(L)(DMF)]·2H2O (complex 1) L = H3TTCA-NH2 = 2′-amino-[1,1′:3′,1″-terphenyl]-4,4″,5′-tricarboxylic acid), is successfully synthesized under solvothermal conditions and structurally characterized. Interestingly, as a transition metal organic framework, the cadmium metal–organic framework exhibits favorable luminescence properties. In addition, the cadmium metal–organic framework reveals excellent selective and sensitive fluorescence sensing for the recognition of Fe3+ with high quenching efficiency ( Ksv = 3.340 × 103 M−1), demonstrating that the cadmium metal–organic framework can be used as a potential sensor for Fe3+.

Tuning the Topology of Three-Dimensional Covalent Organic Frameworks via Steric Control: From to Unprecedented

Whether or not the topology of three-dimensional covalent organic frameworks (3D COFs) can be tuned via steric control remains a big question and has never been reported. Herein, we describe the designed synthesis of two highly crystalline 3D COFs (3D-TPB-COF-OMe and 3D-TPB-COF-Ph), through the polycondensation of tetra(p-aminophenyl)methane and methoxy- or phenyl- substituted 1,2,4,5-tetrakis(4-formylphenyl)benzene on the 3- and 6-positions. Amazingly, by using the continuous rotation electron diffraction technique, 3D-TPB-COF-OMe is determined to have a 5-fold interpenetrated structure with a reported pts net, while 3D-TPB-COF-Ph adopts an unprecedented self-penetrated ljh topology (ljh = Luojia Hill) that does not exist in the database of ToposPro. Therefore, by altering the substituents from methoxy to phenyl groups, the topology of designed 3D COFs changes accordingly, and a rare net is now available. This result clearly demonstrates that such COF structures need to be carefully determined due to its complexity, and moreover, it is promising to design 3D COFs with new topology for interesting application by increasing the steric hindrance of molecular building blocks.

H-Bond-Mediated Selectivity Control of Formate versus CO during CO2 Photoreduction with Two Cooperative Cu/X Sites

It is highly desirable to achieve solar-driven conversion of CO₂ to valuable fuels with controlled selectivity. The existing catalysts are mainly explored for CO production but rarely for formate generation. Herein, highly selective photoreduction of CO₂ to formate (99.7%) was achieved with a high yield of 3040 μmol g^-1 in 10 h by hierarchical integration of photosensitizers and monometallic [bpy-Cu/ClX] (X = Cl or adenine) catalysts into a stable Eu-bpy metal-organic framework. However, replacing X with pyridine in [bpy-CuCl/X] significantly reduced formate production while increasing the CO yield to 960 μmol g^-1. Systematic investigations revealed that the catalytic process is mediated by the H-bond synergy between Cu-bound X and CO₂-derived species, and the selectivity of HCOO^- can be controlled by simply replacing the coordination ligands. This work provides a molecularly precise structural model to provide mechanistic insights for selectivity control of CO₂ photoreduction.

Selective Crystallization of Rare-Earth Ions into Cationic Metal-Organic Frameworks for Rare-Earth Separation

For rare-earth separation, selective crystallization into metal-organic frameworks (MOFs) offers new opportunities. Especially important is the development of MOF platforms with high selectivity toward target ions. Here we report a MOF platform (CPM-66) with low-coordination-number environment for rare-earth ions. This platform is highly responsive to the size variation of rare-earth ions and shows exceptional ion-size selectivity during crystallization. CPM-66 family are based on M₃ O trimers (M=6-coordinated Sc, In, Er-Lu) that are rare for lanthanides. We show that the size matching between urea-type solvents and metal ions is crucial for their successful synthesis. We further show that CPM-66 enables a dramatic multi-fold increase in separation efficiency over CPM-29 with 7-coordinated ions. This work provides some insights into methods to prepare low-coordinate MOFs from large ions and such MOFs could serve as high-efficiency platforms for lanthanide separation, as well as other applications.

A window-space-directed assembly strategy for the construction of supertetrahedron-based zeolitic mesoporous metal-organic frameworks with ultramicroporous apertures for selective gas adsorption

Despite their scarcity due to synthetic challenges, supertetrahedron-based metal-organic frameworks (MOFs) possess intriguing architectures, diverse functionalities, and superb properties that make them in-demand materials. Employing a new window-space-directed assembly strategy, a family of mesoporous zeolitic MOFs have been constructed herein from corner-shared supertetrahedra based on homometallic or heterometallic trimers [M3(OH/O)(COO)6] (M3 = Co3, Ni3 or Co2Ti). These MOFs consisted of close-packed truncated octahedral cages possessing a sodalite topology and large β-cavity mesoporous cages (∼22 Å diameter) connected by ultramicroporous apertures (∼5.6 Å diameter). Notably, the supertetrahedron-based sodalite topology MOF combined with the Co2Ti trimer exhibited high thermal and chemical stability as well as the ability to efficiently separate acetylene (C2H2) from carbon dioxide (CO2).

Functional Copolymers Married with Lanthanide(III) Ions: A Win-Win Pathway to Fabricate Rare Earth Fluorescent Materials with Multiple Applications

Lanthanide(III)-based luminescent materials have attracted great research interests due to their unique optical, electronic, and chemical characteristics. Up to now, how to extend these materials into large, broad application fields is still a great challenging task. In this contribution, we are intended to present a simple but facile strategy to enhance the luminescence from lanthanide ions and impart lanthanide(III)-based luminescent materials with more applicable properties, leading to meet the requirements from different purposes, such as being used as highly emissive powders, hydrogels, films, and sensitive probes under external stimuli. Herein, a water soluble, blue color emissive, temperature sensitive, and film-processable copolymer (Poly-ligand) was designed and synthesized. Upon complexing with Eu³⁺ and Tb³⁺ ions, the red color-emitting Poly-ligand-Eu and green color-emitting Poly-ligand-Tb were produced. After finely tuning the ratios between them, a standard white color emitting Poly-ligand-Eu₁:Tb₄ (CIE = 0.33 and 0.33) was obtained. Furthermore, the resulted materials not only possessed the emissive luminescent property but also inherited functions from the copolymer of Poly-ligand. Thus, these lanthanide(III)-based materials were used for fingerprint imaging, luminescent soft matters formation, colorful organic light-emitting diode device fabrication, and acid/alkali vapors detection.

A Series of Mesoporous Rare-Earth Metal-Organic Frameworks Constructed from Organic Secondary Building Units

Further development of metal-organic frameworks (MOFs) requires an establishment of hierarchical interaction within the framework. Herein, we report a series of mesoporous rare-earth (RE) MOFs that are constructed from an unusual 12-connected π-stacked pyrene secondary building unit (SBU) and a typical 12-connected RE₆ cluster (RE=Eu, Y, Yb, Tb, Ce). The judicious design of a butterfly-shape pyrene ligand with a tert-butyl substituent enables the formation of the disordered 12-connected organic SBUs on its strong intermolecular π-π interactions. The assembly of 12-connected inorganic cuboctahedron SBUs and 12-connected organic distorted hexagonal prism SBUs generates an unprecedented network that can be further simplified into a 4,4-connected pts net linked from planar square and tetrahedra. This work provides fresh insights into the design and synthesis of frameworks constructed from coordinatively, covalently, and noncovalently linked building units.