Two-Step Carbothermal Welding To Access Atomically Dispersed Pd1 on Three-Dimensional Zirconia Nanonet for Direct Indole Synthesis

Encapsulating fullerene into Ti-based metal-organic frameworks with anchored atomically dispersed Pt cocatalysts for efficient hydrogen evolution

Ti-based Metal-organic frameworks (Ti-MOF) have been extensively investigated for producing hydrogen via solar water splitting, while their intrinsic activities are still retarded by the poor performance of photocarriers separation and utilization. Herein, a donor-acceptor (D-A) supramolecular photocatalyst is successfully constructed via encapsulating fullerene (C60) into MIL-125-NH2 and meanwhile depositing individual Pt atoms as cocatalyst. The as-prepared C60@MIL-125-NH2-Pt exhibits remarkable activity in photocatalytic water splitting, with a H2 formation rate of 1180 μmol g-1 h-1, which is ∼ 12 times higher than that of the pristine MIL-125-NH2. Further investigations indicate that the host-guest interactions between C60 and MIL-125-NH2 strengthen the built-in electric field, which greatly facilitates the separation and migration of photogenerated charge carriers. In addition, the cocatalyst of individual Pt atoms not only further promotes the separation and transport of carriers but also enhances the contact between water and the catalyst. All of these factors directly contribute to the superior activity of C60@MIL-125-NH2-Pt. This work provides a new perspective for constructing D-A supramolecular photocatalysts for enhanced charge separation and making full use of photoelectrons to realize efficient hydrogen production.

Synergetic effects of boron nitride with waste zirconia: Evaluation of instantaneous fingerprint detection and mechanical properties for biomedical applications

Herein, present study mainly focuses on the synthesis and characterizations of boron nitride reinforced waste zirconia (wZrO2) with different concentrations. Composites were prepared via a scalable solid-state reaction method. Various physical parameters such as density, ionic concentration, polaron radius, and field strength were evaluated. XRD results reveal crystalline nature with a major phase of tetragonal zirconia and as boron nitride is reinforced, the tetragonal transforms into a monoclinic zirconia. Interconnected spherical grains and nanosheets were observed using FESEM. Mechanical characterizations revealed the highest compressive strength of 266 MPa. The latent fingerprints were visualized using a composite on different surfaces, implementing the powder dusting and solution techniques. MTT assay was performed and revealed good biocompatible nature. These results reveal that composite is suitable for fabrication of bioceramics with acceptable mechanical and biological performances. The composite can also be utilized for latent fingerprint detection in forensic science.

Imaging the dynamic influence of functional groups on metal-organic frameworks

Metal-organic frameworks (MOFs) with different functional groups have wide applications, while the understanding of functionalization influences remains insufficient. Previous researches focused on the static changes in electronic structure or chemical environment, while it is unclear in the aspect of dynamic influence, especially in the direct imaging of dynamic changes after functionalization. Here we use integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM) to directly 'see' the rotation properties of benzene rings in the linkers of UiO-66, and observe the high correlation between local rigidity and the functional groups on the organic linkers. The rigidity is then correlated to the macroscopic properties of CO2 uptake, indicating that functionalization can change the capability through not only static electronic effects, but also dynamic rotation properties. To the best of our knowledge this is the first example of a technique to directly image the rotation properties of linkers in MOFs, which provides an approach to study the local flexibility and paves the way for potential applications in capturing, separation and molecular machine.

Supporting Trimetallic Metal-Organic Frameworks on S/N-Doped Carbon Macroporous Fibers for Highly Efficient Electrocatalytic Oxygen Evolution

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient oxygen evolution reaction (OER). However, the rational construction of hybrid structures with decent physical/electrochemical properties is yet challenging. Herein, a promising OER electrocatalyst composed of trimetallic metal-organic frameworks supported over S/N-doped carbon macroporous fibers (S/N-CMF@Fe_x Co_y Ni_1-x-y -MOF) via a cation-exchange strategy is delicately fabricated. Benefiting from the trimetallic composition with improved intrinsic activity, hollow S/N-CMF matrix facilitating exposure of active sites, as well as their robust integration, the resultant S/N-CMF@Fe_x Co_y Ni_1-x-y -MOF electrocatalyst delivers outstanding activity and stability for alkaline OER. Specifically, it needs an overpotential of 296 mV to reach the benchmark current density of 10 mA cm^-2 with a small Tafel slope of 53.5 mV dec^-1 . In combination with X-ray absorption fine structure spectroscopy and density functional theory calculations, the post-formed Fe/Co-doped γ-NiOOH during the OER operation is revealed to account for the high OER performance of S/N-CMF@Fe_x Co_y Ni_1-x-y -MOF.

Interaction between Single Metal Atoms and UiO-66 Framework Revealed by Low-Dose Imaging

Atomically dispersed metals encapsulated in metal-organic frameworks (MOFs) have attracted extensive attention in catalysis and energy fields. Amino groups were considered conducive to the formation of single atom catalysts (SACs) due to the strong metal-linker interactions. Here, atomic details of Pt₁@UiO-66 and Pd₁@UiO-66-NH₂ are revealed using low-dose integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM). Single Pt atoms locate on the benzene ring of p-benzenedicarboxylic acid (BDC) linkers in Pt@UiO-66, while single Pd atoms are adsorbed by the amino groups in Pd@UiO-66-NH₂. However, Pt@UiO-66-NH₂ and Pd@UiO-66 show obvious clusters. Therefore, amino groups do not always favor the formation of SACs, and density functional theory (DFT) calculations indicate that a moderate binding strength between metals and MOFs is preferred. These results directly reveal the adsorption sites of single metal atoms in UiO-66 family, paving the way for understanding the interaction between single metal atoms and the MOFs.

The synthesis of single-atom catalysts for heterogeneous catalysis

Heterogeneous catalysis is an important class of reactions in industrial production, especially in green chemical synthesis, and environmental and organic catalysis. Single-atom catalysts (SACs) have emerged as promising candidates for heterogeneous catalysis, due to their outstanding catalytic activity, high selectivity, and maximum atomic utilization efficiency. The high specific surface energy of SACs, however, results in the migration and aggregation of isolated atoms under typical reaction conditions. The controllable preparation of highly efficient and stable SACs has been a serious challenge for applications. Herein, we summarize the recent progress in the precise synthesis of SACs and their different heterogeneous catalyses, especially involving the oxidation and reduction reactions of small organic molecules. At the end of this review, we also introduce the challenges confronted by single-atom materials in heterogeneous catalysis. This review aims to promote the generation of novel high-efficiency SACs by providing an in-depth and comprehensive understanding of the current development in this research field.

Recent Advances in Nanomaterial-Based Sensing for Food Safety Analysis

The increasing public attention on unceasing food safety incidents prompts the requirements of analytical techniques with high sensitivity, reliability, and reproducibility to timely prevent food safety incidents occurring. Food analysis is critically important for the health of both animals and human beings. Due to their unique physical and chemical properties, nanomaterials provide more opportunities for food quality and safety control. To date, nanomaterials have been widely used in the construction of sensors and biosensors to achieve more accurate, fast, and selective food safety detection. Here, various nanomaterial-based sensors for food analysis are outlined, including optical and electrochemical sensors. The discussion mainly involves the basic sensing principles, current strategies, and novel designs. Additionally, given the trend towards portable devices, various smartphone sensor-based point-of-care (POC) devices for home care testing are discussed.

Emerging Applications of Synchrotron Radiation X-Ray Techniques in Single Atomic Catalysts

Single atom catalysts (SACs) can achieve a maximum atom utilization efficiency of 100%, which provides significantly increased active sites compared with traditional catalysts during catalytic reactions. Synchrotron radiation technology is an important characterization method for identifying single-atom catalysts. Several types of internal information, such as the coordination number, bond length and electronic structure of metals, can all be analyzed. This review will focus on the introduction of synchrotron radiation techniques and their applications in SACs. First, the fundamentals of synchrotron radiation and the corresponding techniques applied in characterization of SACs will be briefly introduced, such as X-ray absorption near edge spectroscopy and extended X-ray absorption fine structure spectroscopy and in situ techniques. The detailed information obtained from synchrotron radiation X-ray characterization is described through four routes: 1) the local environment of a specific atom; 2) the oxidation state of SACs; 3) electronic structures at different orbitals; and 4) the in situ structure modification during catalytic reaction. In addition, a systematic summary of synchrotron radiation X-ray characterization on different types of SACs (noble metals and transition metals) will be discussed.

Exposing Single Ni Atoms in Hollow S/N-Doped Carbon Macroporous Fibers for Highly Efficient Electrochemical Oxygen Evolution

The development of efficient and cost-effective electrocatalysts toward the oxygen evolution reaction (OER) is highly desirable for clean energy and fuel conversion. Herein, the facile preparation of Ni single atoms embedded hollow S/N-doped carbon macroporous fibers (Ni SAs@S/N-CMF) as efficient catalysts for OER through pyrolysis of designed CdS-NiS_x /polyacrylonitrile composite fibers is reported. Specifically, CdS provides the sulfur source for the doping of polyacrylonitrile-derived carbon matrix and simultaneously creates the hollow macroporous structure, while NiS_x is first reduced to nanoparticles and finally evolves into single Ni atoms through the atom migration-trapping strategy. Benefiting from the abundantly exposed single Ni atoms and hollow macroporous structure, the resultant Ni SAs@S/N-CMF electrocatalysts deliver outstanding activity and stability for OER. Specifically, it needs an overpotential of 285 mV to achieve the benchmark current density of 10 mA cm^-2 with a small Tafel slope of 50.8 mV dec^-1 .

General Strategy toward Hydrophilic Single Atom Catalysts for Efficient Selective Hydrogenation

Well dispersible and stable single atom catalysts (SACs) with hydrophilic features are highly desirable for selective hydrogenation reactions in hydrophilic solvents towards important chemicals and pharmaceutical intermediates. A general strategy is reported for the fabrication of hydrophilic SACs by cation-exchange approach. The cation-exchange between metal ions (M = Ni, Fe, Co, Cu) and Na⁺ ions introduced in the skeleton of metal oxide (TiO₂ or ZrO₂ ) nanoshells plays the key role in forming M₁ /TiO₂ and M₁ /ZrO₂ SACs, which efficiently prevents the aggregation of the exchanged metal ions. The as-obtained SACs are highly dispersible and stable in hydrophilic solvents including alcohol and water, which greatly facilitates the catalysis reaction in alcohol. The Ni₁ /TiO₂ SACs have been successfully utilized as catalysts for the selective C=C hydrogenation of cinnamaldehyde to produce phenylpropanal with 98% conversion, over 90% selectivity, good recyclability, and a turnover frequency (TOF) of 102 h^-1 , overwhelming most reported catalysts including noble metal catalysts.

Highly efficient metal-organic frameworks adsorbent for Pd(II) and Au(III) recovery from solutions: Experiment and mechanism

With the boom of modern industry, the demand for precious metals palladium (Pd) and gold (Au) is increasing. However, the discharge of Pd(II) and Au(III) wastewater has caused environmental pollution and shortage of resources. Here, a new metal-organic frameworks adsorbent (MOF-AFH) was synthesized to efficiently separate Pd(II) and Au(III) from the water. The adsorption behavior of Pd(II) and Au(III) was explored at the same time. When gold and palladium are adsorbed separately, the adsorption capacity of gold and palladium is 389.02 mg/g and 191.27 mg/g, respectively. The equilibration time is 3 h. When gold and palladium coexist, the adsorption capacities of Au(III) and Pd(II) are 238.71 and 115.02 mg/g, respectively. The experimental results show that the adsorption of Pd(II) and Au(III) on MOF-AFH is a single-layer chemical adsorption, which is an endothermic process. MOF-AFH has excellent selectivity and after MOF-AFH is repeatedly used 4 times, the removal effect can still reach more than 90%. The adsorption mechanisms include reduction reaction and chelation with N and O-containing functional groups on the adsorbent. There is also electrostatic interaction for Au(III) adsorption. The adsorbent can be used to efficiently recover gold and palladium from wastewater.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Single-Atom Catalysis: From Simple Reactions to the Synthesis of Complex Molecules

To date, the scope of single-atom catalysts (SAC) in liquid-phase transformations is rather limited owing to stability issues and the inability to activate complex substances. This calls for a better design of the catalyst support that can provide a dynamic coordination environment needed for catalytic action, and yet retain robustness against leaching or aggregation. In addition, the chemical orthogonality of SAC is useful for designing tandem or multicomponent reactions, in which side reactions common to metal nanoparticles are suppressed. In this review, the intrinsic mechanism will be highlighted that controls reaction efficiency and selectivity in SAC-catalyzed pathways, as well as the structural dynamism of SAC under complex liquid-phase conditions. These mechanistic insights are helpful for the development of next-generation SAC systems for the synthesis of high-value pharmaceuticals through late-stage functionalization, sequential and multicomponent strategies.

Temperature-Controlled Selectivity of Hydrogenation and Hydrodeoxygenation of Biomass by Superhydrophilic Nitrogen/Oxygen Co-Doped Porous Carbon Nanosphere Supported Pd Nanoparticles

Selective hydrogenation and hydrodeoxygenation (HDO) of biomass to value-added products play a crucial role in the development of renewable energy resources. However, achieving a temperature-controlled selectivity within one catalytic system while retaining excellent hydrogenation and HDO performance remains a great challenge. Here, nitrogen/oxygen (N/O) co-doped porous carbon nanosphere derived from resin polymer spheres is synthesized as the host matrix to in situ encapsulate highly dispersed Pd nanoparticles (NPs). Through N/O co-doping, the defects on the surface of carbon structure can serve as active sites to promote substrate adsorption. After a facile H₂ O₂ post-treatment process, the presence of abundant carboxyl groups on the porous carbon nanospheres can act as acidic sites to replace the use of acidic additives in the HDO process. Additionally, the increased surface oxygen-containing groups improve hydrophilicity to disperse catalysts in aqueous solutions. Owing to the unique highly dispersed Pd NPs and abundant surface defects, the Pd@APF-H₂ O₂ (2.3 nm) catalysts exhibit excellent catalytic activity and temperature-controlled selectivity for hydrogenation and HDO products of biomass-derived vanillin.

Solvent-Mediated Synthesis of Hierarchical MOFs and Derived Urchin-Like Pd@SC/HfO2 with High Catalytic Activity and Stability

Carbon materials with hierarchical morphologies, pores, and compositions have attracted extraordinary attention due to their unique structural advantages and widespread applications. However, their controllable synthesis remains a grand challenge. Herein, a solvent-mediated strategy was demonstrated for the preparation of an urchin-like superstructure via modulating the hydrothermal condition (acetic acid/water ratio) of metal-organic frameworks (MOFs). The direct pyrolysis of a hierarchical NUS-6 precursor produced a well-defined carbon-based composite consisting of sulfur-doped carbon (SC) and HfO₂ with an urchin-like morphology and micro-/mesoporosity, while the doped S sites and oxygen vacancies of HfO₂ can help to anchor and activate Pd nanoparticles (NPs) through the strong host-guest interaction, which was further confirmed by the calculated results of the binding energy and differential charge density through density functional theory (DFT). The synthesized Pd@SC/HfO₂ composite exhibited extremely high catalytic activity and stability toward the water-phase hydrodeoxygenation of vanillin (conversion >99%, selectivity >99%), as well as good universality for the hydrogenation of a series of unsaturated hydrocarbons in an aqueous system. Remarkably, the catalytic activity and structural stability of Pd@SC/HfO₂ were largely maintained even after successive 10 cycles.

Gold Catalyst Anchored to Pre-Reduced Co3O4 Nanorods for the Hydrodeoxygenation of Vanillin Using Alcohols as Hydrogen Donors

The preparation of highly dispersed metal catalysts with strong electronic metal-support interactions (EMSIs) is of great significance. In this study, oxygen vacancies (OVs) were generated on the surfaces of Co₃O₄ nanorods (NRs) through NaBH₄ treatment, and then the generated surface OVs were used to anchor gold clusters. The resulting catalyst was used for the hydrodeoxygenation (HDO) of vanillin based on transfer hydrogenation with alcohol donors. The conversion of vanillin and the selectivity to 2-methoxy-4-methylphenol (MMP) both reached 99% under the optimized reaction conditions, and these values were significantly higher than those obtained for the gold catalyst supported on the untreated Co₃O₄ NRs. The obtained results were verified by theoretical calculations and experimental data and confirmed the existence of strong EMSIs between the OV-enriched Co₃O₄ NRs (Co₃O₄ NRs-OVs) and the gold clusters, which allows electron transfer from the Co₃O₄ NRs to gold. Increasing the number of electrons on the gold surface can promote the catalytic hydrogen transfer of alcohol, in addition to selectively adsorbing the C═O group in vanillin to improve the selectivity toward MMP. This strategy based on the OV-anchoring of metals onto the surface of a support can be extended to other metals, thereby providing a promising method for the design of advanced and highly efficient metal catalysts.

N-Coordinated Ir single atoms anchored on carbon octahedrons for catalytic oxidation of formaldehyde under ambient conditions

N-Coordinated Ir single atoms using N-doped carbon as a non-oxide support for formaldehyde removal under ambient conditions for the first time.

Highly dispersed palladium nanoclusters anchored on nanostructured hafnium(iv) oxide as highly efficient catalysts for the Suzuki–Miyaura coupling reaction

Pd@HfO2 derived via two-step pyrolysis of Pd@NH2-UiO-66(Hf) exhibited high catalytic activity for the Suzuki–Miyaura coupling reactions.

New Palladium - ZrO2 Nano-Architectures from Thermal Transformation of UiO-66-NH2 for Carbonylative Suzuki and Hydrogenation Reactions

The new nanocomposites, Pd/C/ZrO₂ , PdO/ZrO_2, and Pd/PdO/ZrO₂ , were prepared by thermal conversion of Pd@UiO-66-Zr-NH₂ (MOF) in nitrogen or air atmosphere. The presence of Pd nanoparticles, uniformly distributed on the ZrO₂ or C/ZrO₂ matrix, was evidenced by transmission electron microscopy, scanning electron microscopy (SEM), Raman and X-ray Photoelectron Spectroscopy (XPS) methods. All pyrolysed composites retained the shape of the MOF template. They catalyze carbonylative Suzuki coupling under 1 atm CO with an efficiency significantly higher than the original Pd@UiO-66-Zr-NH₂ . The most active PdO/ZrO₂ composite, formed benzophenone with TOF up to 1600 h^-1 , while by using Pd@UiO-66-Zr-NH₂ , much lower TOF values, 51-95 h^-1 , were achieved. After the reaction, PdO/ZrO₂ was recovered with the same composition and catalytic activity. Very good results were also obtained in the transfer hydrogenation of benzophenones to alcohols with Pd/C/ZrO₂ and PdO/ZrO₂ catalysts under microwave irradiation.

Single-Atom Catalysts: A Review of Synthesis Strategies and Their Potential for Biofuel Production

Biofuels have been derived from various feedstocks by using thermochemical or biochemical procedures. In order to synthesise liquid and gas biofuel efficiently, single-atom catalysts (SACs) and single-atom alloys (SAAs) have been used in the reaction to promote it. SACs are made up of single metal atoms that are anchored or confined to a suitable support to keep them stable, while SAAs are materials generated by bi- and multi-metallic complexes, where one of these metals is atomically distributed in such a material. The structure of SACs and SAAs influences their catalytic performance. The challenge to practically using SACs in biofuel production is to design SACs and SAAs that are stable and able to operate efficiently during reaction. Hence, the present study reviews the system and configuration of SACs and SAAs, stabilisation strategies such as mutual metal support interaction and geometric coordination, and the synthesis strategies. This paper aims to provide useful and informative knowledge about the current synthesis strategies of SACs and SAAs for future development in the field of biofuel production.

Biocompatible Ruthenium Single-Atom Catalyst for Cascade Enzyme-Mimicking Therapy

Rationally constructing single-atom enzymes (SAEs) with superior activity, robust stability, and good biocompatibility is crucial for tumor therapy but still remains a substantial challenge. In this work, we adopt biocompatible carbon dots as the carrier material to load Ru single atoms, achieving Ru SAEs with superior multiple enzyme-like activity and stability. Ru SAEs behave as oxidase, peroxidase, and glutathione oxidase mimics to synchronously catalyze the generation of reactive oxygen species (ROS) and the depletion of glutathione, thus amplifying the ROS damage and finally causing the death of cancer cells. Notably, Ru SAEs exhibit excellent peroxidase-like activity with a specific activity of 7.5 U/mg, which surpasses most of the reported SAEs and is 20 times higher than that of Ru/C. Theoretical results reveal that the electrons of the Ru 4d orbital in Ru SAEs are transferred to O atoms in H₂O₂ and then efficiently activate H₂O₂ to produce ^•OH. Our work may provide some inspiration for the design of SAEs for cancer therapy.

General Design Concept for Single-Atom Catalysts toward Heterogeneous Catalysis

As a new and popular material, single-atom catalysts (SACs) exhibit excellent activity, selectivity, and stability for numerous important reactions, and show great potential in heterogeneous catalysis due to their high atom utilization efficiency and the controllable characteristics of the active sites. The composition and coordination would determine the geometric and electronic structures of SACs, and thus greatly influence the catalytic performance. Based on atom economy, rational design and controllable synthesis of SACs have become central tasks in the fields of low-cost and green catalysis. Herein, an introduction to the recent progress in the precise synthesis of SACs including the regulation of the coordination structure and the choice of different systems is presented. Thereafter, the potentials of SACs in different applications are comprehensively summarized and discussed. Furthermore, a detailed discussion of the recent developments regarding the large-scale preparation of SACs is provided, including the major issues and prospects for industrialization. Finally, the main challenges and opportunities of rapid large-scale industrialization of SACs are briefly discussed.

Porous Materials Confining Single Atoms for Catalysis

In recent years, single-atom catalysts (SACs) have received extensive attention due to their unique structure and excellent performance. Currently, a variety of porous materials are used as confined single-atom catalysts, such as zeolites, metal-organic frameworks (MOFs), or carbon nitride (CN). The support plays a key role in determining the coordination structure of the catalytic metal center and its catalytic performance. For example, the strong interaction between the metal and the carrier induces the charge transfer between the metal and the carrier, and ultimately affects the catalytic behavior of the single-atom catalyst. Porous materials have unique chemical and physical properties including high specific surface area, adjustable acidity and shape selectivity (such as zeolites), and are rational support materials for confined single atoms, which arouse research interest in this field. This review surveys the latest research progress of confined single-atom catalysts for porous materials, which mainly include zeolites, CN and MOFs. The preparation methods, characterizations, application fields, and the interaction between metal atoms and porous support materials of porous material confined single-atom catalysts are discussed. And we prospect for the application prospects and challenges of porous material confined single-atom catalysts.

Low-Temperature Synthesis of Single Palladium Atoms Supported on Defective Hexagonal Boron Nitride Nanosheet for Chemoselective Hydrogenation of Cinnamaldehyde

Metal-support interactions are of great importance in determining the support-activity in heterogeneous catalysis. Here we report a low-temperature synthetic strategy to create atomically dispersed palladium atoms anchored on defective hexagonal boron nitride (h-BN) nanosheet. Density functional theory (DFT) calculations suggest that the nitrogen-containing B vacancy can provide stable anchoring sites for palladium atoms. The presence of single palladium atoms was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. This catalyst showed exceptional efficiency in chemoselective hydrogenation of cinnamaldehyde, along with excellent recyclability, sintering-resistant ability, and scalability. We anticipate this synthetic approach for the synthesis of high-quality SACs based on h-BN support is amenable to large-scale production of bench-stable catalysts with maximum atom efficiency for industrial applications.

MOF-enzyme hybrid nanosystem decorated 3D hollow fiber membranes for in-situ blood separation and biosensing array

Modified metal-organic frameworks (MOFs) doping with enzymes exhibit high enzyme stability and catalytic performance, which is a research hotspot in the field of enzyme-based sensing. Although the MOF-enzyme constitutes a 3D structure in the nanoscale, the macroscopic assembly configuration still stays in 1D or 2D structures, limiting sensing applications towards complex biological targets. Herein, the MOF-enzyme hybrid nanosystem was assembled into 3D porous conductive supports via a controllable physical embedding method, displaying high enzymatic loading, stability and cascade catalytic performance. The modified MOFs combing with enzymes served as a sensing reaction system, and the conductive hollow fiber membranes (HFMs) served as a functional platform. The multifunctional device integrates pumpless hydrodynamic transport, interconnected conductive polymer, and blood separation modules, showing fast capillary fluid flow, trace sampling (3 μL), high selectivity and accuracy. The linear sensing range was in 2-24 mM glucose, 0.05-6 mM lactic acid, and 0.1-10 mM cholesterol, respectively, with sensitivities of 24.2, 150, 73.6 nA mM^-1. Furthermore, this strategy of modular assembly of biosensing array can easily implement multiplex metabolites detection simultaneously.

Defective Ultrafine MnOx Nanoparticles Confined within a Carbon Matrix for Low-Temperature Oxidation of Volatile Organic Compounds

The development of catalysts for volatile organic compound (VOC) treatment by catalytic oxidation is of great significance to improve the atmospheric environment. Size-effect and oxygen vacancy engineering are effective strategies for designing high-efficiency heterogeneous catalysts. Herein, we explored the in situ carbon-confinement-oxidation method to synthesize ultrafine MnO_x nanoparticles with adequately exposed defects. They exhibited an outstanding catalytic performance with a T₉₀ of 167 °C for acetone oxidation, which is 73 °C lower than that of bulk MnO_x (240 °C). This excellent catalytic activity was primarily ascribed to their high surface area, rich oxygen vacancies, abundant active oxygen species, and good reducibility at low temperatures. Importantly, the synthesized ultrafine MnO_x exhibited impressive stability in long-term, cycling and water-resistance tests. Moreover, the possible mechanism for acetone oxidation over MnO_x-NA was revealed. In this work, we not only prepared a promising material for removing VOCs but also provided a new strategy for the rational design of ultrafine nanoparticles with abundant defects.

Plasma-engineered bifunctional cobalt-metal organic framework derivatives for high-performance complete water electrolysis

Metal-organic framework (MOF) derivatives are among the most promising catalysts for the hydrogen evolution reaction (HER) for clean hydrogen energy production. Herein, we report the in situ synthesized MOF-derived CoPO hollow polyhedron nanostructures by simultaneous high temperature annealing and Ar-N₂ radio frequency plasma treatment in the presence of a P precursor and subsequent oxygen incorporation from open air at lower temperature. The optimum Ar-N₂ gas flow rates are used to precisely tune the P/O ratio, cut Co bonds within the MOFs and reconnect Co with P. Consequently, both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance are enhanced. Meanwhile, the filling of P elements can effectively change the electronic structure around the catalyst to ensure the uniform distribution of catalytically active sites. The resultant CoPO hollow nanocages with large specific surface areas show excellent bifunctional electrocatalytic activity towards both HER and OER with a low overpotential of 105 and 275 mV and a small Tafel slope of 48 and 52 mV dec^-1, respectively. Our results open a new avenue for precise plasma-assisted engineering of MOF-derived hybrid hetero-structured electrocatalysts with rich oxygen vacancies and P dopants to simultaneously boost both half reactions in water electrolysis.

Ultrathin Amorphous/Crystalline Heterophase Rh and Rh Alloy Nanosheets as Tandem Catalysts for Direct Indole Synthesis

Heterogeneous noble-metal-based catalysis plays an essential role in the production of fine chemicals. Rh-based catalysts are one of the most active candidates for indole synthesis. However, it is still highly desired to develop heterogeneous Rh-based catalysts with high activity and selectivity. In this work, a general, facile wet-chemical method is reported to synthesize ultrathin amorphous/crystalline heterophase Rh and Rh-based bimetallic alloy nanosheets (NSs), including RhCu, RhZn, and RhRu. Impressively, the amorphous/crystalline heterophase Rh NSs exhibit enhanced catalytic activity toward the direct synthesis of indole compared to the crystalline counterpart. Importantly, the obtained amorphous/crystalline heterophase RhCu alloy NSs can further enhance the selectivity to indole of >99.9% and the conversion is 100%. This work demonstrates the importance of phase engineering and metal alloying in the rational design and synthesis of tandem heterogeneous catalysts toward fine chemical synthesis.

A Glass-Ceramic with Accelerated Surface Reconstruction toward the Efficient Oxygen Evolution Reaction

The effective non-precious metal catalysts toward the oxygen evolution reaction (OER) are highly desirable for electrochemical water splitting. Herein, we prepare a novel glass-ceramic (Ni_1.5 Sn@triMPO₄ ) by embedding crystalline Ni_1.5 Sn nanoparticles into amorphous trimetallic phosphate (triMPO₄ ) matrix. This unique crystalline-amorphous nanostructure synergistically accelerates the surface reconstruction to active Ni(Fe)OOH, due to the low vacancy formation energy of Sn in glass-ceramic and high adsorption energy of PO₄ ^3- at the V_O sites. Compared to the control samples, this dual-phase glass-ceramic exhibits a remarkably lowered overpotential and boosted OER kinetics after surface reconstruction, rivaling most of state-of-the-art electrocatalysts. The residual PO₄ ^3- and intrinsic V_O sites induce redistribution of electron states, thus optimizing the adsorption of OH* and OOH* intermediates on metal oxyhydroxides and promoting the OER activity.

Highly Active and Stable Palladium Single-Atom Catalyst Achieved by a Thermal Atomization Strategy on an SBA-15 Molecular Sieve for Semi-Hydrogenation Reactions

Single-atom catalysts (SACs) have great potential to revolutionize heterogeneous catalysis, enabling fast and direct construction of desired products. Given their notable promise, a general and scalable strategy to access these catalyst systems is highly desirable. Herein, we describe a straightforward and efficient thermal atomization strategy to create atomically dispersed palladium atoms anchored on a nitrogen-doped carbon shell over an SBA-15 support. Their presence was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The nitrogen-containing carbon shells provide atomic diffusion sites for anchoring palladium atoms emitted from palladium nanoparticles. This catalyst showed exceptional efficiency in selective hydrogenation of phenylacetylene and other types of alkynes. Importantly, it showed excellent stability, recyclability, and sintering-resistant ability. This approach can be scaled up with comparable catalytic activity. We anticipate that this work may lay the foundation for rapid access to high-quality SACs that are amenable to large-scale production for industrial applications.

Single-atom catalysis in advanced oxidation processes for environmental remediation

This review presents the recent advances in synthetic strategies, characterisation, and computations of carbon-based single-atom catalysts, as well as their innovative applications and mechanisms in advanced oxidation technologies.

Synergistic Pd Single Atoms, Clusters, and Oxygen Vacancies on TiO2 for Photocatalytic Hydrogen Evolution Coupled with Selective Organic Oxidation

Developing efficient photocatalysts for synchronously producing H₂ and high value-added chemicals holds great promise to enhance solar energy conversion. Herein, a facile strategy of simultaneously engineering Pd cocatalyst and oxygen vacancies (V_O s) on TiO₂ to promote H₂ production coupled with selective oxidation of benzylamine is demonstrated. The optimized Pd_SA+C /TiO₂ -V_O photocatalyst containing Pd single atoms (SAs), clusters (C), and V_O s exhibits much superior performance to those of TiO₂ -V_O and Pd_SA /TiO₂ -V_O counterparts. The production rates of H₂ and N-benzylidenebenzylamine over Pd_SA+C /TiO₂ -V_O are 52.7 and 1.5 times those over TiO₂ -V_O , respectively. Both experimental and theoretical studies have elucidated the synergistic effect of Pd SAs, clusters, and V_O s on TiO₂ in boosting the photocatalytic reaction. The presence of Pd SAs facilitates the generation and stabilization of abundant V_O s by the formation of PdOTi³⁺ atomic interface, while Pd clusters promote the photogenerated charge separation and afford the optimum active sites for H₂ evolution. Surface V_O s of TiO₂ guarantee the efficient adsorption and dissociation/activation of reactant molecules. This study reveals the effect of active-site engineering on the photocatalysis and is expected to shed substantial light on future structure design and modulation of semiconductor photocatalysts.

Selective Hydrogenation on a Highly Active Single-Atom Catalyst of Palladium Dispersed on Ceria Nanorods by Defect Engineering

Single-atom catalysis represents a new frontier that integrates the merits of homogeneous and heterogeneous catalysis to afford exceptional atom efficiency, activity, and selectivity for a range of catalytic systems. Herein we describe a simple defect engineering strategy to construct an atomically dispersed palladium catalyst (Pd^δ+, 0 < δ < 2) by anchoring the palladium atoms on oxygen vacancies created in CeO₂ nanorods. This was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The as-prepared catalyst showed exceptional catalytic performance in the hydrogenation of styrene (99% conversion, TOF of 2410 h^-1), cinnamaldehyde (99% conversion, 99% selectivity, TOF of 968 h^-1), as well as oxidation of triethoxysilane (99% conversion, 79 selectivity, TOF of 10 000 h^-1). This single-atom palladium catalyst can be reused at least five times with negligible activity decay. The palladium atoms retained their dispersion on the support at the atomic level after thermal stability testing in Ar at 773 K. Most importantly, this synthetic method can be scaled up while maintaining catalytic performance. We anticipate that this method will expedite access to single-atom catalysts with high activity and excellent resistance to sintering, significantly impacting the performance of this class of catalysts.