Carbon Dioxide-Mediated C(sp2)–H Arylation of Primary and Secondary Benzylamines

Palladium-Catalyzed para-Selective C-H Olefination and Acetoxylation of Benzylamines Enabled by an Unmasked Benzoyl Template

Benzylamines belong to an important class of building blocks in the synthesis of biologically active natural products and drugs. Encumbered by amide-directed ortho-C-H activation, remote para-selective C-H functionalization of benzylamines has hitherto not been realized to date. Here, we report a palladium-catalyzed para-selective C-H olefination and acetoxylation of benzylamines using a functionalized benzoyl template. Enhancing the coordination strength of the directing group in the template significantly improved the site selectivity of C-H functionalization.

Palladium-Catalyzed Selective γ-Monoarylation of Free Amines Containing Symmetric γ-C-H Controlled by a Transient Directing Group

We developed a new transient directing group, N-(2-benzoyl-4-chlorophenyl)-1,1,1-trifluoromethanesulfonamide, which can facilitate the γ-monoarylation of free amines containing symmetric γ-C-H bonds. A variety of amines containing symmetric and identical γ-C(sp3)-H and γ-C(sp2)-H reacted with a diverse range of aryl and heteroaryl iodides to provide γ-monoarylated products exclusively.

Unified Approach to Deamination and Deoxygenation Through Isonitrile Hydrodecyanation: A Combined Experimental and Computational Investigation

Herein, we describe a general hydrodefunctionalization protocol of alcohols and amines through a common isonitrile intermediate. To cleave the relatively inert C-NC bond, we leveraged dual hydrogen atom transfer (HAT) and photoredox catalysis to generate a nucleophilic boryl radical, which readily forms an imidoyl radical intermediate from the isonitrile. Rapid β-scission then accomplishes defunctionalization. This method has been applied to the hydrodefunctionalization of both amine and alcohol-containing pharmaceuticals, natural products, and biomolecules. We extended this approach to the reduction of carbonyls and olefins to their saturated counterparts, as well as the hydrodecyanation of alkyl nitriles. Both experimental and computational studies demonstrate a facile β-scission of the imidoyl radical, and reconcile differences in reactivity between nitriles and isonitriles within our protocol.

Directed C(sp3)-H Arylation of Free α-Aminophosphonates: Dual Models Exploration via Palladium Catalysis

In this report, we present the dual activation models for transient directing group-directed and amino-self-directed Pd-catalyzed α-aminophosphonate side-chain C(sp3)-H arylation. Both strategies showed facile, efficient, and single regioselectivity in the reaction between free α-aminophosphonates and aryl iodides. Furthermore, the modification of amino and late-stage functionalization of the C(sp3)-P bond from products indicates potential applications for α-aminophosphonates.

Native Amino Group Directed Meta-Selective C-H Arylation of Primary Amines Via Pd/Norbornene Catalysis

The selective functionalization of remote C-H bonds in free primary amines holds significant promise for the late-stage diversification of pharmaceuticals. However, to date, the direct functionalization of the meta position of amine substrates lacking additional directing groups remains underexplored. In this Letter, we present a successful meta-C-H arylation of free primary amine derivatives using aryl iodides, resulting in synthetically valuable yields. This meta-selective C-H functionalization is achieved through a sequence involving native amino-directed Pd-catalyzed seven-membered cyclometalation, followed by the utilization of a norbornene-type transient mediator.

Multicomponent reactions to access S-aryl dithiocarbamates via an electron donor-acceptor complex under open-to-air conditions

A simple and efficient transition-metal/photocatalyst-free visible-light-driven one-pot three-component reaction between thianthrenium salts, carbon disulfide and amines under an air atmosphere for the preparation of biologically relevant S-aryl dithiocarbamates is developed. This methodology is robust and scalable, and exhibits a broad substrate scope and excellent functional group tolerance. Of note, a wide range of primary aliphatic amines bearing different groups are suitable for this strategy. The synthetic utility was further demonstrated by a two-step one-pot multi-component reaction and photo-flow decagram-scale synthesis. Preliminary mechanistic studies suggest that the association of the dithiocarbamate anion with thianthrenium salts formed an electron donor-acceptor complex, which upon excitation with visible light produced an aryl radical via single-electron transfer.

Hydrated [3+2] Cyclotelomerization of Butafulvenes to Create Multiple Contiguous Fully Substituted Carbon Centers

The construction of multiple continuous fully substituted carbon centers, which serve as unique structural motif in natural products, is a challenging topic in organic synthesis. Herein, we report a hydrated [3+2] cyclotelomerization of butafulvenes to create contiguous fully substituted carbon backbone. In the presence of scandium triflate, all-carbon skeleton with spiro fused tricyclic ring can be constructed in high diastereoselectivity by utilizing butafulvene as the synthon. Mechanistic studies suggest that this atom-economic reaction probably proceeds through a synergistic process containing butafulvenes dimerization and nucleophilic attack by water. In addition, the tricyclic product can undergo a series of synthetic derivatizations, which highlights the potential applications of this strategy. The recyclability of Sc(OTf)3 has also been demonstrated to show its robust performance in this hydrated cyclotelomerization.

Selective C-H Activation of Unprotected Allylamines by Control of Catalyst Speciation

An outstanding challenge in the Pd-catalyzed functionalization of allylamines is the control of stereochemistry. Terminal alkenes preferentially undergo Heck-type reactions, while internal alkenes may undergo a mixture of Heck and C-H activation reactions that give mixtures of stereochemical products. In the case of unprotected allylamines, the challenge in achieving C-H activation is that facile in situ formation of Pd nanoparticles leads to preferential formation of trans rather than cis-substituted products. In this study we have demonstrated the feasibility of using mono-protected amino acid (MPAA) ligands as metal protecting groups to prevent aggregation and reduction, allowing the selective synthesis of free cis-arylated allylamines. This method complements Heck-selective methods, allowing complete stereochemical control over the synthesis of cinnamylamines, an important class of amine that can serve as therapeutics directly or as advanced intermediates. To highlight the utility of the methodology, we have demonstrated rapid access to mu opioid receptor ligands.

Transition-Metal-Catalyzed C-H Bond Activation for the Formation of C-C Bonds in Complex Molecules

Site-predictable and chemoselective C-H bond functionalization reactions offer synthetically powerful strategies for the step-economic diversification of both feedstock and fine chemicals. Many transition-metal-catalyzed methods have emerged for the selective activation and functionalization of C-H bonds. However, challenges of regio- and chemoselectivity have emerged with application to highly complex molecules bearing significant functional group density and diversity. As molecular complexity increases within molecular structures the risks of catalyst intolerance and limited applicability grow with the number of functional groups and potentially Lewis basic heteroatoms. Given the abundance of C-H bonds within highly complex and already diversified molecules such as pharmaceuticals, natural products, and materials, design and selection of reaction conditions and tolerant catalysts has proved critical for successful direct functionalization. As such, innovations within transition-metal-catalyzed C-H bond functionalization for the direct formation of carbon-carbon bonds have been discovered and developed to overcome these challenges and limitations. This review highlights progress made for the direct metal-catalyzed C-C bond forming reactions including alkylation, methylation, arylation, and olefination of C-H bonds within complex targets.

Native Amino Group Directed Site-Selective ε-C(sp2)-H Iodination of Primary Amines

Selective remote C-H activating amines using unmodified NH₂ as a native directing group demonstrate compelling synthetic utilities. The 3-arylpropan-1-amine moiety is present in many drugs and candidates in clinical trials. Selective iodination of 3-arylpropan-1-amines on remote aryl rings gives valuable intermediates for modifying bioactive molecules and synthesizing quinolones. Here we report the first palladium-catalyzed selective ε-C(sp²)-H iodination of free 3-arylpropan-1-amines via a seven-membered palladacycle.

A new transient directing group diethoxyethyl-L-proline facilitates ortho-arylation of aryl-amines/-amino acids via Pd-catalyzed C(sp2)-H activation

Mono-ortho-arylated arylamines are constituents of various natural products but their syntheses are challenging. This report describes a new synthetic methodology for the ortho-arylation of arylamines and α-aromatic amino acids (phenylglycine and phenylalanine) through a Pd-catalyzed C(sp²)-H activation using the synthetic transient directing group diethoxyethyl-L-proline (DEP). A catalytic amount of diethoxyethyl-L-proline is sufficient to form mono-arylated arylamines as the major products using aryliodides. This method could be useful for the synthesis of various biphenyl amines and novel peptidomimetics.

HFIP in Organic Synthesis

1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) is a polar, strongly hydrogen bond-donating solvent that has found numerous uses in organic synthesis due to its ability to stabilize ionic species, transfer protons, and engage in a range of other intermolecular interactions. The use of this solvent has exponentially increased in the past decade and has become a solvent of choice in some areas, such as C-H functionalization chemistry. In this review, following a brief history of HFIP in organic synthesis and an overview of its physical properties, literature examples of organic reactions using HFIP as a solvent or an additive are presented, emphasizing the effect of solvent of each reaction.

Direct and Selective Electrocarboxylation of Styrene Oxides with CO2 for Accessing β-Hydroxy Acids

Highly selective and direct electroreductive ring-opening carboxylation of epoxides with CO2 in an undivided cell is reported. This reaction shows broad substrate scopes within styrene oxides under mild conditions, providing practical and scalable access to important synthetic intermediate β-hydroxy acids. Mechanistic studies show that CO2 functions not only as a carboxylative reagent in this reaction but also as a promoter to enable efficient and chemoselective transformation of epoxides under additive-free electrochemical conditions. Cathodically generated α-radical and α-carbanion intermediates lead to the regioselective formation of α-carboxylation products.

Amine-Catalyzed Copper-Mediated C-H Sulfonylation of Benzaldehydes via a Transient Imine Directing Group

Transient directing groups (TDGs) can provide a powerful means for C−H functionalization without requiring additional steps for directing group introduction and removal. We report the first use of a TDG in combination with copper to effect C−H functionalization. The regioselective copper mediated β−C(sp²)−H sulfonylation of aldehydes with sulfinate salts is accomplished using catalytic β‐alanine to form a transient imine. A broad range of sulfonylated benzaldehydes are prepared using copper fluoride as both copper source and oxidant, involving a [5,6] cupracyclic intermediate. γ‐(peri)‐Sulfonylation of napthyl and phenanthrenyl carboxaldehydes is achieved through [6,6] cupracyclic intermediates. Further derivatisation of the aldehyde products is demonstrated. Kinetic experiments and Hammett analysis suggest the turnover limiting step to be a concerted asynchronous C−H cleavage via a dearomative Wheland‐type transition state.

Carbon dioxide enhances sulphur-selective conjugate addition reactions

Sulphur-selective conjugate addition reactions play a central role in synthetic chemistry and chemical biology. A general tool for conjugate addition reactions should provide high selectivity in the presence of competing nucleophilic functional groups, namely nitrogen nucleophiles. We report CO₂-mediated chemoselective S-Michael addition reactions where CO₂ can reversibly control the reaction pHs, thus providing practical reaction conditions. The increased chemoselectivity for sulphur-alkylation products was ascribed to CO₂ as a temporary and traceless protecting group for nitrogen nucleophiles, while CO₂ efficiently provide higher conversion and selectivity sulphur nucleophiles on peptides and human serum albumin (HSA) with various electrophiles. This method offers simple reaction conditions for cysteine modification reactions when high chemoselectivity is required.

Pd-catalysed C-H functionalisation of free carboxylic acids

Pd-catalysed C-H functionalisation of free carboxylic acids has drawn significant attention over the last few years due to the predominance of carboxylic acid moieties in pharmaceuticals and agrochemicals. But their coordinating ability was overlooked and masked by exogenous directing groups for a long time. Even other crucial roles of carboxylic acids as additives and steric inducers that directly influence the mode of a reaction have been widely neglected. This review aims to embrace all of the diverse aspects of carboxylic acids except additive and steric effects by concisely and systematically describing their versatile role in Pd-catalysed proximal and distal C-H activation reactions that could be implemented in the pharmaceutical and agrochemical industries. In addition, the mechanistic perspectives along with several recent strategies developed in the last few years discussed here will serve as educational resources for future research.

Photocatalytic synthesis of tetra-substituted furans promoted by carbon dioxide

A CO2-promoted transition metal-free photocatalytic synthesis of tetra-substituted furan derivatives from 1,3-diketones as the only starting material.

Amine-Directed Mizoroki-Heck Arylation of Free Allylamines

The transition metal-catalyzed Mizoroki−Heck reaction is a powerful method to synthesize C–C bonds, allowing access to several important pharmaceuticals. Traditionally free amines have not been compatible with these approaches due...

Native Amine-Directed ortho-C–H Halogenation and Acetoxylation /Condensation of Benzylamines

Free or unfunctionalized benzylamines are well known to participate in C–H activation in the presence of palladium salts. Despite the ease with which these complexes can be activated, subsequent functionalization of the dimeric cyclometalates can be challenging. We demonstrate herein a free primary amine based C–H activation/functionalization protocol that allows for the ortho-C–H chlorination and bromination of unprotected benzylamines. We also demonstrate how use of fluorine-based oxidants gives rise to a unique acetoxylation/­cyclization owing to the nucleophilicity of the free primary amine directing group.

Transient Directing Groups in Metal-Organic Cooperative Catalysis

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.

Progress and perspectives on directing group-assisted palladium-catalysed C-H functionalisation of amino acids and peptides

Peptide modifications can unlock a variety of compounds with structural diversity and abundant biological activity. In nature, peptide modifications, such as functionalisation at the side-chain position of amino acids, are performed using post-translational modification enzymes or incorporation of unnatural amino acids. However, accessing these modifications remains a challenge for organic chemists. During the past decades, selective C-H activation/functionalisation has attracted considerable attention in synthetic organic chemistry as a pathway to peptide modification. Various directing group strategies have been discovered that assist selective C-H activation. In particular, bidentate directing groups that enable tuneable and reversible coordination are now recognised as one of the most efficient methods for the site-selective C-H activation and functionalisation of numerous families of organic compounds. Synthetic peptide chemists have harnessed bidentate directing group strategies for selective functionalisation of the β- and γ-positions of amino acids. This method has been expanded and recognised as an effective device for the late stage macrocyclisation and total synthesis of complex peptide natural products. In this review, we discuss various β-, γ-, and δ-C(sp³)-H bond functionalisation reactions of amino acids for the formation of C-X bonds with the aid of directing groups and their application in late-stage macrocyclisation and the total synthesis of complex peptide natural products.

Transition Metal Catalyzed Free-Amine (-NH2 ) Directed C-H Bond Activation and Functionalization for Biaryl Frameworks

Transition-metal-catalyzed direct transformation of inert C-H bond has revolutionized the arsenal of main-stream organic synthesis, providing a new upfront to forge structurally enriched and biologically relevant scaffolds in a step- and atom-economical way. Past decades have accounted for the major developments in this realm, proclaiming excellent site-selectivity by exploiting a variety of coordinating directing groups (DGs). Consideration of versatile, abundant, sp³ -hybridized free-amine (-NH₂ ) functionality for the same purpose has always been a formidable task owing to its innate reactivity. In recent years, free-amine functionality has emerged as a potent DG for a wide range of C-C and C-heteroatom bonds formations and annulation cascades. In this review article, we have discussed the advancements of free-amine directed C-H activation/functionalization reactions towards biaryl frameworks made within a decade (2012 to 2021).

Pd-Catalysed direct C(sp2)-H fluorination of aromatic ketones: concise access to anacetrapib

The Pd-cataylsed direct ortho-C(sp2)-H fluorination of aromatic ketones has been developed for the first time. The reaction features good regioselectivity and simple operations, constituting an alternative shortcut to access fluorinated ketones. A concise synthesis of anacetrapib has also been achieved by using late-stage C-H fluorination as a key step.

C-H Activation: Toward Sustainability and Applications

Since the definition of the "12 Principles of Green Chemistry" more than 20 years ago, chemists have become increasingly mindful of the need to conserve natural resources and protect the environment through the judicious choice of synthetic routes and materials. The direct activation and functionalization of C-H bonds, bypassing intermediate functional group installation is, in abstracto, step and atom economic, but numerous factors still hinder the sustainability of large-scale applications. In this Outlook, we highlight the research areas seeking to overcome the sustainability challenges of C-H activation: the pursuit of abundant metal catalysts, the avoidance of static directing groups, the replacement of metal oxidants, and the introduction of bioderived solvents. We close by examining the progress made in the subfield of aryl C-H borylation from its origins, through highly efficient but precious Ir-based systems, to emerging 3d metal catalysts. The future growth of this field will depend on industrial uptake, and thus we urge researchers to strive toward sustainable C-H activation.

Palladium-Catalyzed Regioselective Arylation of Unprotected Allylamines

Palladium-catalyzed organometallic transformations of free amines are often unsuccessful due to side reactions, such as oxidation, that can occur. However, the ability to furnish the free amine products from these reactions is important for improving the utility and sustainability of these processes, especially for accessing their potential as medicinal and agrochemical agents. Notably, the 3,3-diarylallylamine motif is prevalent in a variety of biologically relevant structures, yet there are few catalytic approaches to their synthesis, and none involving the free amine. Herein, we describe a simple protocol for the arylation of cinnamylamines and the diarylation of terminal allylamines to generate a diverse group of 3,3-diarylallylamine products using a PdII precatalyst. Key features of the method are the ability to access relatively mild conditions that facilitate a broad substrate scope as well as direct diarylation of terminal allylamine substrates. In addition, several complex and therapeutically relevant molecules are included to demonstrate the utility of the transformation.

CO2 -Enabled Cyanohydrin Synthesis and Facile Iterative Homologation Reactions*

Thermodynamic and kinetic control of a chemical process is the key to access desired products and states. Changes are made when a desired product is not accessible; one may manipulate the reaction with additional reagents, catalysts and/or protecting groups. Here we report the use of carbon dioxide to accelerate cyanohydrin synthesis under neutral conditions with an insoluble cyanide source (KCN) without generating toxic HCN. Under inert atmosphere, the reaction is essentially not operative due to the unfavored equilibrium. The utility of CO₂ -mediated selective cyanohydrin synthesis was further showcased by broadening Kiliani-Fischer synthesis under neutral conditions. This protocol offers an easy access to a variety of polyols, cyanohydrins, linear alkylnitriles, by simply starting from alkyl- and arylaldehydes, KCN and an atmospheric pressure of CO₂ .

Carbon dioxide-promoted palladium-catalyzed dehydration of primary allylic alcohols: access to substituted 1,3-dienes

A carbon dioxide promoted dehydration reaction of primary allylic alcohols gives synthetically important substituted 1,3-dienes in good yields under milder conditions compared with the reaction using a heterogeneous catalyst or carbon monoxide.

Copper-catalyzed four-component reaction of alkenes, Togni's reagent, amines and CO2: stereoselective synthesis of (Z)-enol carbamates

A copper-catalyzed four-component reaction of alkenes, Togni's reagent, amines and CO₂ was disclosed, providing an efficient and straightforward access to a range of stereodefined (Z)-enol carbamates.

Rhodium(i) complexes derived from tris(isopropyl)-azaphosphatrane—controlling the metal–ligand interplay

Proazaphosphatranes are intriguing ligand architectures comprising a bicyclic cage of flexible nature. They can undergo structural deformations due to transannulation while displaying modular electronic and steric properties. Herein, we report the synthesis and coordination chemistry of rhodium(i) complexes bearing a tris(isopropyl)-azaphosphatrane (TⁱPrAP) ligand. The molecular structure of the primary complex (1) revealed the insertion of the metal center into a P–N bond of the ligand. The addition of a Lewis acid, i.e., lithium chloride, promoted the dynamic behavior of the complex in the solution, which was studied by state-of-the-art NMR spectroscopy. Substituting the cyclooctadiene ligand at the metal center with triphenylphosphine or 2-pyridyldiphenylphosphine unveiled the adaptive nature of the TⁱPrAP backbone capable of switching its axial nitrogen from interacting with the phosphorus atom to coordinate the rhodium center. This led the entire ligand edifice to change its binding to rhodium from a bidentate to tridentate coordination. Altogether, our study shows that introducing a TⁱPrAP ligand allows for unique molecular control of the immediate environment of the metal center, opening perspectives in controlled bond activation and catalysis.

The synthesis and coordination chemistry of Rh(i) complexes bearing a tris(isopropyl)-azaphosphatrane (TⁱPrAP) ligand are reported. The adaptive nature of TⁱPrAP ligands allows for molecular control of the immediate environment of the metal center.

A CO2-Mediated Conjugate Cyanide Addition to Chalcones

Carbon dioxide is an intrinsically stable molecule; however, it can readily react with various nucleophilic reagents. In the presence of a cyanide source, CO2 was proven to be useful to promote addition reactions. Here we report the use of CO2 to facilitate 1,4-conjugate cyanide addition reaction to chalcones to generate organonitriles. Nitriles are key component in organic synthesis due to their utility in numerous functional group transformation, however, conjugation addition of cyanide has been a challenge in this substrate class due to side reactions. To mitigate this, we employed simple ammonium and metal cyanide sources as nucleophiles under carbon dioxide atmosphere where high selectivity toward the desired product was obtained. The presented reaction is not feasible under inert atmosphere, which highlights the important role of CO2, as a Lewis and Brøndsted acidic catalyst. Further derivatization of organonitriles compounds were performed to showcase the utility of the reaction, while an unprecedented dimerization reaction was identified and characterized, affording a cyclopentanone scaffold.

Transient imine directing groups for the C-H functionalisation of aldehydes, ketones and amines: an update 2018-2020

The use of pre-installed directing groups has become a popular and powerful strategy to control site selectivity in transition metal catalysed C-H functionalisation reactions. However, the necessity for directing group installation and removal reduces the efficiency of a directed C-H functionalisation method. To overcome this limitation, taking inspiration from organocatalytic methodologies, the use of transient directing groups has arisen. These methods allow for a transient ligand to be used, potentially in catalytic quantities, without the need for discrete installation or removal steps, enabling the discovery of more efficient, and mechanistically intriguing, dual catalytic methods. This review summarises recent developments in this fast moving field covering >70 new methodologies, highlighting new directing group designs and advances in mechanistic understanding. It covers progress since 2018, providing an update to our previous review of the field.

Density Functional Theory Study on the Mechanism of Iridium-Catalyzed Benzylamine ortho C-H Alkenylation with Ethyl Acrylate

Iridium-catalyzed oxidative o-alkenylation of benzylamines with acrylates was enabled by the directing group pentafluorobenzoyl (PFB). Density functional theory calculations were performed to explore the detailed reaction mechanism. The calculated results reveal that N-deprotonation prior to C-H activation is favored over direct C-H activation. Moreover, C-H activation is reversible and not the rate-determining step, which has been supported by the experimental observation. The regio- and stereoselectivity of ethyl acrylate insertion are controlled by the steric effect and the carbon atom with a larger orbital coefficient of the π* antibonding orbital in the nucleophilic attack, respectively. The migratory insertion of ethyl acrylate is computationally found to be rate-determining for the whole catalytic cycle. Finally, the seven-membered ring intermediate IM11 undergoes a sequential N-protonation and β-H elimination with the assistance of AcOH, rather than β-H elimination and reductive elimination proposed experimentally, to afford the o-alkenylated product. IM11 is unable to directly cyclize through C-N reductive elimination because both sp³-hybridized N and C atoms are unfavorable for N-C reductive elimination. The origin of the directing group PFB preventing the product and intermediates undergoing aza-Michael addition has been explained.

Ligand-Controlled Direct γ-C-H Arylation of Aldehydes

The first example of Pd^II -catalyzed γ-C(sp³ )-H functionalization of aliphatic and benzoheteroaryl aldehydes has been developed using a transient ligand and an external ligand, concurrently. A wide array of γ-arylated aldehydes were readily accessed without preinstalling internal directing groups. The catalytic mechanism was studied by performing deuterium-labelling experiments, which indicated that the γ-C(sp³ )-H bond cleavage is the rate-limiting step during the reaction process. This reaction could be performed on a gram scale, and also demonstrated its potential application in the synthesis of new mechanofluorochromic materials with blue-shifted mechanochromic properties.

Total Synthesis of (-)-Graminin A Based on Asymmetric Cyclization Carbonylation of Propargyl Acetate

The first total synthesis of (-)-graminin A is described. Key features of our synthetic approach involve a palladium-catalyzed asymmetric cyclization carbonylation of prochiral propargylic acetate, conversion of the orthoester product into methyl 4-oxo-3-furancarboxylate, and copper complex-mediated aldol condensation of (+)-gregatin B bearing a diene moiety. A new synthesis of (+)-gregatin B and the first synthesis of (-)-graminin A were achieved.