Metal–Organic Framework Stabilizes a Low-Coordinate Iridium Complex for Catalytic Methane Borylation

Tailored pore-confined single-site iron(III) catalyst for selective CH4 oxidation to CH3OH or CH3CO2H using O2

Direct oxidation of methane to valuable oxygenates like alcohols and acetic acid under mild conditions poses a significant challenge due to high C‒H bond dissociation energy, facile overoxidation to CO and CO2 and the intricacy of C-H activation/C-C coupling. In this work, we develop a multifunctional iron(III) dihydroxyl catalytic species immobilized within a metal-organic framework (MOF) for selective methane oxidation into methanol or acetic acid at different reaction conditions using O2. The active-site isolation of monomeric FeIII(OH)2 species at the MOF nodes, their confinement within the porous framework, and their electron-deficient nature facilitate chemoselective C‒H oxidation, yielding methanol or acetic acid with high productivities of 38 , 592 μ mol CH 3 OH g Fe - 1 h - 1 and 81 , 043 μ mol CH 3 CO 2 H g Fe - 1 h - 1 , respectively. Experiments and theoretical calculations suggest that methanol formation occurs via a FeIII-FeI-FeIII catalytic cycle, whereas CH3CO2H is produced via hydrocarboxylation of in-situ generated CH3OH with CO2 and H2, and direct CH4 carboxylation with CO2.

Selective Monoborylation of Methane by a Mono Bipyridyl-Nickel(II) Hydride Catalyst

We report the development of an earth-abundant metal catalyst for methane C-H borylation. The post-synthetic metalation of bipyridine-functionalized zirconium metal-organic framework (MOF) with NiBr2, followed by treatment with NaEt3BH affords MOF-supported monomeric bipyridyl-nickel(II) dihydride species via active site isolation. The heterogeneous and recyclable nickel catalyst selectively borylates methane at 200 °C using pinacolborane (HBpin) to afford CH3Bpin in 61 % yield with a turnover number (TON) up to 1388. The confinement of the active NiH2-species within the uniformly porous MOF allows selective monoborylation of methane via shape-selective catalysis by preventing the formation of sterically encumbered overborylated products. Unlike MOF-Ni catalyst, its homogeneous control is almost inactive in methane borylation due to its intermolecular decomposition. Our mechanistic investigation, including spectroscopic, kinetic, and control experiments, as well as DFT calculations, revealed that stabilizing mononuclear bipyridyl-nickel dihydride and diboryl species by MOF is crucial for achieving efficient methane borylation via turnover-limiting σ-bond metathesis. This work shows promise in designing MOF-based abundant metal catalysts for the chemoselective functionalization of methane and other inert molecules into valuable chemicals.

A Stable Site-Isolated Mono(phosphine)-Rhodium Catalyst on a Metal-Organic Layer for Highly Efficient Hydrogenation Reactions

Phosphine-ligated transition metal complexes play a pivotal role in modern catalysis, but our understanding of the impact of ligand counts on the catalysis performance of the metal center is limited. Here we report the synthesis of a low-coordinate mono(phosphine)-Rh catalyst on a metal-organic layer (MOL), P-MOL • Rh, and its applications in the hydrogenation of mono-, di-, and tri-substituted alkenes as well as aryl nitriles with turnover numbers (TONs) of up to 390000. Mechanistic investigations and density functional theory calculations revealed the lowering of reaction energy barriers by the low steric hindrance of site-isolated mono(phosphine)-Rh sites on the MOL to provide superior catalytic activity over homogeneous Rh catalysts. The MOL also prevents catalyst deactivation to enable recycle and reuse of P-MOL • Rh in catalytic hydrogenation reactions.

Phosphine-incorporated Metal-Organic Framework for Palladium Catalyzed Heck Coupling Reaction

As an emerging material with the potential to combine the high efficiency of homogeneous catalysts and high stability and recyclability of heterogeneous catalysts, metal-organic frameworks (MOFs) have been viewed as one of the candidates to produce catalysts of the next generation. Herein, we heterogenized the highly active mono(phosphine)-Pd complex on surface of UiO-66 MOF, as a catalyst for Suzuki and Heck cross coupling reactions. The successful immobilization of these Pd-monophosphine complexes on MOF surface to form UiO-66-PPh2-Pd was characterized and confirmed via comprehensive set of analytical methods. UiO-66-PPh2-Pd showed high activity and selectivity for both Suzuki and Heck Cross Coupling Reactions. This strategy enabled facile access to mono(phosphine) complexes which are challenging to design and require multistep synthesis in homogeneous systems, paving the way for future MOF catalysts applications by similar systems.

Selective monoborylation of methane by metal-organic framework confined mononuclear pyridylimine-iridium(I) hydride

Chemoselective monoborylation of methane in high yield is a grand challenge. We have developed a metal-organic framework confined pyridylimine-iridium hydride catalyst, which is efficient in methane C-H borylation using bis(pinacolato)diboron to afford methyl boronic acid pinacol ester in 98% GC-yield at 130 °C with a TON of 196. Mechanistic investigation suggests the oxidative addition of methane to IrIII(Bpin)2(H) species to form IrV(Bpin)2(CH3)(H)2 as the turnover limiting step.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Bridging Homogeneous and Heterogeneous Catalysis: Phosphine-Functionalized Metal-Organic Frameworks

Phosphine-functionalized metal-organic frameworks (P-MOFs) as an emerging class of coordination polymers, have provided novel opportunities for the development of heterogeneous catalysts. Yet, compared with the ubiquitous phosphine systems in homogeneous catalysis, heterogenization of phosphines in MOFs is still at its early stage. In this Minireview, we summarize the synthetic strategies, characterization and catalytic reactions based on the P-MOFs reported in literature. In particular, various catalytic reactions are discussed in detail in terms of phosphine ligand structure-function relationship, including the potential obstacles for future development. Finally, we discuss the possible solutions, including new types of reactions and techniques as the perspectives for the development of P-MOF catalysts, highlighting the opportunities and challenges.

Low-Valent Metals in Metal-Organic Frameworks Via Post-Synthetic Modification

Metal-organic frameworks (MOFs) provide uniquely tunable, periodic platforms for site-isolation of reactive low-valent metal complexes of relevance in modern catalysis, adsorptive applications, and fundamental structural studies. Strategies for integrating such species in MOFs include post-synthetic metalation, encapsulation and direct synthesis using low-valent organometallic complexes as building blocks. These approaches have each proven effective in enhancing catalytic activity, modulating product distributions (i.e., by improving catalytic selectivity), and providing valuable mechanistic insights. In this minireview, we explore these different strategies, as applied to isolate low-valent species within MOFs, with a particular focus on examples that leverage the unique crystallinity, permanent porosity and chemical mutability of MOFs to achieve deep structural insights that lead to new paradigms in the field of hybrid catalysis.

PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors

Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.3 nm) was decorated on TiO2, which works for the efficient, stable, and selective photocatalytic oxidative coupling of methane at room temperature. A high methane conversion rate of 2480 μmol g-1 h-1 to C2 with an apparent quantum efficiency of ~8.4% has been achieved. More importantly, the photocatalyst exhibits the turnover frequency and turnover number of 116 h-1 and 12,642 with respect to PdCu, representing a record among all the photocatalytic processes (λ > 300 nm) operated at room temperature, together with a long stability of over 112 hours. The nanoalloy works as a hole acceptor, in which Pd softens and weakens C-H bond in methane and Cu decreases the adsorption energy of C2 products, leading to the high efficiency and long-time stability.

Generation and Stabilization of a Dinickel Catalyst in a Metal-Organic Framework for Selective Hydrogenation Reactions

Although many monometallic active sites have been installed in metal-organic frameworks (MOFs) for catalytic reactions, there are no effective strategies to generate bimetallic catalysts in MOFs. Here we report the synthesis of a robust, efficient, and reusable MOF catalyst, MOF-NiH, by adaptively generating and stabilizing dinickel active sites using the bipyridine groups in MOF-253 with the formula of Al(OH)(2,2'-bipyridine-5,5'-dicarboxylate) for Z-selective semihydrogenation of alkynes and selective hydrogenation of C=C bonds in α,β-unsaturated aldehydes and ketones. Spectroscopic studies established the dinickel complex (bpy⋅- )NiII (μ2 -H)2 NiII (bpy⋅- ) as the active catalyst. MOF-NiH efficiently catalyzed selective hydrogenation reactions with turnover numbers of up to 192 and could be used in five cycles of hydrogenation reactions without catalyst leaching or significant decrease of catalytic activities. The present work uncovers a synthetic strategy toward solution-inaccessible Earth-abundant bimetallic MOF catalysts for sustainable catalysis.

Chemical complexity for targeted function in heterometallic titanium-organic frameworks

Research on metal-organic frameworks is shifting from the principles that control the assembly, structure, and porosity of these reticular solids, already established, into more sophisticated concepts that embrace chemical complexity as a tool for encoding their function or accessing new properties by exploiting the combination of different components (organic and inorganic) into these networks. The possibility of combining multiple linkers into a given network for multivariate solids with tunable properties dictated by the nature and distribution of the organic connectors across the solid has been well demonstrated. However, the combination of different metals remains still comparatively underexplored due to the difficulties in controlling the nucleation of heterometallic metal-oxo clusters during the assembly of the framework or the post-synthetic incorporation of metals with distinct chemistry. This possibility is even more challenging for titanium-organic frameworks due to the additional difficulties intrinsic to controlling the chemistry of titanium in solution. In this perspective article we provide an overview of the synthesis and advanced characterization of mixed-metal frameworks and emphasize the particularities of those based in titanium with particular focus on the use of additional metals to modify their function by controlling their reactivity in the solid state, tailoring their electronic structure and photocatalytic activity, enabling synergistic catalysis, directing the grafting of small molecules or even unlocking the formation of mixed oxides with stoichiometries not accessible to conventional routes.

Phosphine-based metal-organic layers to construct single-site heterogeneous catalysts for arene borylation

Metal-organic layers (MOLs) are versatile platforms for creating single-site heterogeneous catalysts. Incorporating molecular functionalities into MOLs is crucial for catalysis. In this study, we synthesized phosphine-containing MOLs constructed from Hf₆-oxo secondary building units (SBUs) and phosphine ligands. The mono(phosphine)-Ir complexes generated by the metalation of TPP-MOL were highly active as heterogeneous catalysts for the C(sp²)-H borylation of a range of arenes. This research expands the diversity of MOL-based catalysts.

Principles of Design and Synthesis of Metal Derivatives from MOFs

Materials derived from metal-organic frameworks (MOFs) have demonstrated exceptional structural variety and complexity and can be synthesized using low-cost scalable methods. Although the inherent instability and low electrical conductivity of MOFs are largely responsible for their low uptake for catalysis and energy storage, a superior alternative is MOF-derived metal-based derivatives (MDs) as these can retain the complex nanostructures of MOFs while exhibiting stability and electrical conductivities of several orders of magnitude higher. The present work comprehensively reviews MDs in terms of synthesis and their nanostructural design, including oxides, sulfides, phosphides, nitrides, carbides, transition metals, and other minor species. The focal point of the approach is the identification and rationalization of the design parameters that lead to the generation of optimal compositions, structures, nanostructures, and resultant performance parameters. The aim of this approach is to provide an inclusive platform for the strategies to design and process these materials for specific applications. This work is complemented by detailed figures that both summarize the design and processing approaches that have been reported and indicate potential trajectories for development. The work is also supported by comprehensive and up-to-date tabular coverage of the reported studies.

Sequential Modifications of Metal-Organic Layer Nodes for Highly Efficient Photocatalyzed Hydrogen Atom Transfer

Herein, we report the synthesis of a bifunctional photocatalyst, Zr-OTf-EY, through sequential modifications of metal cluster nodes in a metal-organic layer (MOL). With eosin Y and strong Lewis acids on the nodes, Zr-OTf-EY catalyzes cross-coupling reactions between various C-H compounds and electron-deficient alkenes or azodicarboxylate to afford C-C and C-N coupling products, with turnover numbers of up to 1980. In Zr-OTf-EY-catalyzed reactions, Lewis acid sites bind the alkenes or azodicarboxylate to increase their local concentrations and electron deficiency for enhanced radical additions, while EY is stabilized by site isolation on the MOL to afford a long-lived catalyst for hydrogen atom transfer. The proximity between photostable EY sites and Lewis acids on the nodes of Zr-OTf-EY enhances the catalytic efficiency by approximately 400 times over the homogeneous counterpart in the cross-coupling reactions.

Selective Methane Oxidation to Acetic Acid Using Molecular Oxygen over a Mono-Copper Hydroxyl Catalyst

Acetic acid is an industrially important chemical, produced mainly via carbonylation of methanol using precious metal-based homogeneous catalysts. As a low-cost feedstock, methane is commercially transformed to acetic acid via a multistep process involving energy-intensive methane steam reforming, methanol synthesis, and, subsequently, methanol carbonylation. Here, we report a direct single-step conversion of methane to acetic acid using molecular oxygen (O₂) as the oxidant under mild conditions over a mono-copper hydroxyl site confined in a porous cerium metal-organic framework (MOF), Ce-UiO-Cu(OH). The Ce-UiO MOF-supported single-site copper hydroxyl catalyst gave exceptionally high acetic acid productivity of 335 mmolg_cat^-1 in 96% selectivity with a Cu TON up to 400 at 115 °C in water. Our spectroscopic and theoretical studies and controlled experiments reveal that the conversion of methane to acetic acid occurs via oxidative carbonylation, where methane is first activated at the copper hydroxyl site via σ-bond metathesis to afford Cu-methyl species, followed by carbonylation with in situ-generated carbon monoxide and subsequent hydrolysis by water. This work may guide the rational design of heterogeneous abundant metal catalysts for the activation and conversion of methane to acetic acid and other valuable chemicals under mild and environmentally friendly reaction conditions.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Anthraquinone-Based Metal-Organic Frameworks as a Bifunctional Photocatalyst for C-H Activation

Metal-organic frameworks (MOFs) have gained attention as multifunctional catalytic platforms, allowing us to gain important insights into synergistically activating both C-H bonds and oxygen for improving oxidation. Herein, by ingenious incorporation of anthraquinone, we report an anthraquinone-based MOF as a bifunctional heterogeneous photocatalytic platform to simultaneously activate inert C(sp³)-H bonds and oxygen for C-H bond oxidation. Making use of the rigid framework with the fixation and isolation effect, both a great chemical stability and bifunctional synergistic photocatalytic effects were obtained through the immobilization of anthraquinone into a MOF. Importantly, while decorating two carboxyl groups on anthraquinone, the carbonyl groups of anthraquinone photosensitizers were not involved in coordinating the self-assembly and orderly arranged on the wall of channels that were constructed through a π-π interaction between the anthraquinone moieties in the adjacent layers, which was beneficial to form and stabilize the excited-state radical intermediates in the molecule-fenced channels, and the close proximity between the catalytic sites and the substrates to abstract a hydrogen atom from the substrate through the hydrogen atom transfer process aimed at activating the inertness of C-H bonds. Moreover, high-density-distributed anthraquinone dyes in the confined channels would activate oxygen to form singlet oxygen (¹O₂) through an energy transfer pathway, further promoting inert C(sp³)-H bond oxidation efficiency. Under visible light irradiation, this anthraquinone-based MOF was successfully applied to explore activation and oxidation of a series of substrates containing benzylic C(sp³)-H bonds in the presence of air or oxygen to produce the corresponding carbonyl products. This bifunctional photocatalytic platform based on a heterogeneous MOF provides an available catalytic avenue to develop a scalable and sustainable synthetic strategy using green and sustainable oxygen as the potent oxidant.

Site Isolation in Metal-Organic Layers Enhances Photoredox Gold Catalysis

Herein, we report the synthesis of a metal-organic layer, Hf-Ru-Au, containing Ru(bipyridine)₃²⁺-type photosensitizers and (phosphine)-AuCl catalysts for photoredox Au-catalyzed cross-coupling of allenoates, alkenes, or alkynes with aryldiazonium salts to afford furanone, tetrahydrofuran, or aryl alkyne derivatives, respectively. Site isolation of (phosphine)-AuCl complexes in Hf-Ru-Au prevents Au catalyst deactivation via ligand redistribution, Au(I) disproportionation, and aryl-phosphine reductive elimination, while the proximity between the Ru photosensitizers and Au catalysts enhances catalytic efficiency, with 14-200 times higher activity over those of the homogeneous controls in the cross-coupling reactions.

Gas sensing based on metal-organic frameworks: Concepts, functions, and developments

Effective detection of pollutant gases is vital for protection of natural environment and human health. There is an increasing demand for sensing devices that are equipped with high sensitivity, fast response/recovery speed, and remarkable selectivity. Particularly, attention is given to the designability of sensing materials with porous structures. Among diverse kinds of porous materials, metal-organic frameworks (MOFs) exhibit high porosity, high degree of crystallinity and exceptional chemical activity. Their strong host-guest interactions with guest molecules facilitate the application of MOFs in adsorption, catalysis and sensing systems. In particular, the tailorable framework/composition and potential for post-synthetic modification of MOFs endow them with widely promising application in gas sensing devices. In this review, we outlined the fundamental aspects and applications of MOFs for gas sensors, and discussed various techniques of monitoring gases based on MOFs as functional materials. Insights and perspectives for further challenges faced by MOFs are discussed in the end.

Supported Lanthanum Borohydride Catalyzes CH Borylation Inside Zeolite Micropores

The zeolite‐supported lanthanide La(BH₄)_x‐HY₃₀ catalyzes C−H borylation of benzene with pinacolborane (HBpin), providing a complementary approach to precious, late transition metal‐catalyzed borylations. The reactive catalytic species are generated from La grafted at the Brønsted acid sites (BAS) in micropores of the zeolite, whereas silanoate‐ and aluminoate‐grafted sites are inactive under the reaction conditions. During typical catalytic borylations, conversion to phenyl pinacolborane (PhBpin) is zero‐order in HBpin concentration. A turnover number (TON) of 167 is accessed by capping external silanols, selectively grafting at BAS sites, and adding HBpin slowly to the reaction.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Ethylene polymerization with a crystallographically well-defined metal–organic framework supported catalyst

Crystallographic characterization of a heterogeneous ethylene polymerization catalyst elucidates a chromium–carbon bond after alkyl aluminum activation and provides mechanistic insights.

Single-Crystal-to-Single-Crystal Transformations of Metal-Organic-Framework-Supported, Site-Isolated Trigonal-Planar Cu(I) Complexes with Labile Ligands

Transition-metal complexes bearing labile ligands can be difficult to isolate and study in solution because of unwanted dinucleation or ligand substitution reactions. Metal-organic frameworks (MOFs) provide a unique matrix that allows site isolation and stabilization of well-defined transition-metal complexes that may be of importance as moieties for gas adsorption or catalysis. Herein we report the development of an in situ anion metathesis strategy that facilitates the postsynthetic modification of Cu(I) complexes appended to a porous, crystalline MOF. By exchange of coordinated chloride for weakly coordinating anions in the presence of carbon monoxide (CO) or ethylene, a series of labile MOF-appended Cu(I) complexes featuring CO or ethylene ligands are prepared and structurally characterized using X-ray crystallography. These complexes have an uncommon trigonal planar geometry because of the absence of coordinating solvents. The porous host framework allows small and moderately sized molecules to access the isolated Cu(I) sites and displace the "place-holder" CO ligand, mirroring the ligand-exchange processes involved in Cu-centered catalysis.

Tunable Band Gaps in MUV-10(M): A Family of Photoredox-Active MOFs with Earth-Abundant Open Metal Sites

Titanium-based metal-organic frameworks (Ti-MOFs) have attracted intense research attention because they can store charges in the form of Ti³⁺ and they serve as photosensitizers to cocatalysts through heterogeneous photoredox reactions at the MOF-liquid interface. Both the charge storage and charge transfer depend on the redox potentials of the MOF and the molecular substrate, but the factors controlling these energetic aspects are not well understood. Additionally, photocatalysis involving Ti-MOFs relies on cocatalysts rather than the intrinsic Ti reactivity, in part because Ti-MOFs with open metal sites are rare. Here, we report that the class of Ti-MOFs known as MUV-10 can be synthetically modified to include a range of redox-inactive ions with flexible coordination environments that control the energies of the photoactive orbitals. Lewis acidic cations installed in the MOF cluster (Cd²⁺, Sr²⁺, and Ba²⁺) or introduced to the pores (H⁺, Li⁺, Na⁺, K⁺) tune the electronic structure and band gaps of the MOFs. Through the use of optical redox indicators, we report the first direct measurement of the Fermi levels (redox potentials) of photoexcited MOFs in situ. Taken together, these results explain the ability of Ti-MOFs to store charges and provide design principles for achieving heterogeneous photoredox chemistry with electrostatic control.

Ligand-Directed Conformational Control over Porphyrinic Zirconium Metal-Organic Frameworks for Size-Selective Catalysis

Zirconium-based metal-organic frameworks (Zr-MOFs) have aroused enormous interest owing to their superior stability, flexible structures, and intriguing functions. Precise control over their crystalline structures, including topological structures, porosity, composition, and conformation, constitutes an important challenge to realize the tailor-made functionalization. In this work, we developed a new Zr-MOF (PCN-625) with a csq topological net, which is similar to that of the well-known PCN-222 and NU-1000. However, the significant difference lies in the conformation of porphyrin rings, which are vertical to the pore surfaces rather than in parallel. The resulting PCN-625 exhibits two types of one-dimensional channels with concrete diameters of 2.03 and 0.43 nm. Furthermore, the vertical porphyrins together with shrunken pore sizes could limit the accessibility of substrates to active centers in the framework. On the basis of the structural characteristics, PCN-625(Fe) can be utilized as an efficient heterogeneous catalyst for the size-selective [4 + 2] hetero-Diels-Alder cycloaddition reaction. Due to its high chemical stability, this catalyst can be repeatedly used over six times. This work demonstrates that Zr-MOFs can serve as tailor-made scaffolds with enhanced flexibility for target-oriented functions.

Oriented Growth of In-Oxo Chain Based Metal-Porphyrin Framework Thin Film for High-Sensitive Photodetector

The potential of metal-organic frameworks (MOFs) for applications in optoelectronics results from a unique combination of interesting photophysical properties and straightforward tunability of organic and inorganic units. Here, it is demonstrated that using MOF approach chromophores can be assembled into well-ordered 1D arrays using metal-oxo strands as lead structure, and the resulting porphyrinic rows exhibit unique photophysical properties and allow the realization of highly sensitive photodetectors. A porphyrinic MOF thin film, In-TCPP surface-coordinated MOF thin films with [021] orientation is fabricated using a layer-by-layer method, from In(NO3)3 and TCPP (5,10,15,20-(4-carboxyphenyl)porphyrin). Detailed experimental and theoretical analysis reveals that the assembly yields a structure where In-oxo strands running parallel to the substrate fix the chromophoric linkers to yield 1D arrays of porphyrins. The frontier orbitals of this highly anisotropic arrangement are localized in these columnar arrangements of porphyrins and result in high photoactivity, which is exploited to fabricate a photodetector with record (as compared to other organic materials) responsivity in visible regime of 7.28 × 1014 Jones and short rise/fall times (0.07/0.04 s). This oriented MOF thin film-based high-sensitive photodetector provides a new avenue to use inorganic, stable lead structures to assemble organic semiconductors into regular arrays, thus creating a huge potential for the fabrication of optoelectronic devices.

Neighboring Zn-Zr Sites in a Metal-Organic Framework for CO2 Hydrogenation

ZrZnO_x is active in catalyzing carbon dioxide (CO₂) hydrogenation to methanol (MeOH) via a synergy between ZnO_x and ZrO_x. Here we report the construction of Zn²⁺-O-Zr⁴⁺ sites in a metal-organic framework (MOF) to reveal insights into the structural requirement for MeOH production. The Zn²⁺-O-Zr⁴⁺ sites are obtained by postsynthetic treatment of Zr₆(μ₃-O)₄(μ₃-OH)₄ nodes of MOF-808 by ZnEt₂ and a mild thermal treatment to remove capping ligands and afford exposed metal sites for catalysis. The resultant MOF-808-Zn catalyst exhibits >99% MeOH selectivity in CO₂ hydrogenation at 250 °C and a high space-time yield of up to 190.7 mg_MeOH g_Zn^-1 h^-1. The catalytic activity is stable for at least 100 h. X-ray absorption spectroscopy (XAS) analyses indicate the presence of Zn²⁺-O-Zr⁴⁺ centers instead of Zn_mO_n clusters. Temperature-programmed desorption (TPD) of hydrogen and H/D exchange tests show the activation of H₂ by Zn²⁺ centers. Open Zr⁴⁺ sites are also critical, as Zn²⁺ centers supported on Zr-based nodes of other MOFs without open Zr⁴⁺ sites fail to produce MeOH. TPD of CO₂ reveals the importance of bicarbonate decomposition under reaction conditions in generating open Zr⁴⁺ sites for CO₂ activation. The well-defined local structures of metal-oxo nodes in MOFs provide a unique opportunity to elucidate structural details of bifunctional catalytic centers.

Engineering the Coordination Sphere of Isolated Active Sites to Explore the Intrinsic Activity in Single-Atom Catalysts

Reducing the dimensions of metallic nanoparticles to isolated, single atom has attracted considerable attention in heterogeneous catalysis, because it significantly improves atomic utilization and often leads to distinct catalytic performance. Through extensive research, it has been recognized that the local coordination environment of single atoms has an important influence on their electronic structures and catalytic behaviors. In this review, we summarize a series of representative systems of single-atom catalysts, discussing their preparation, characterization, and structure-property relationship, with an emphasis on the correlation between the coordination spheres of isolated reactive centers and their intrinsic catalytic activities. We also share our perspectives on the current challenges and future research promises in the development of single-atom catalysis. With this article, we aim to highlight the possibility of finely tuning the catalytic performances by engineering the coordination spheres of single-atom sites and provide new insights into the further development for this emerging research field.

Invisible Silver Guests Boost Order in a Framework That Cyclizes and Deposits Ag3Sb Nanodots

The infusion of metal guests into (i.e., metalating) the porous medium of metal-organic frameworks (MOFs) is a topical approach to wide-ranging functionalization purposes. We report the notable interactions of AgSbF₆ guests with the designer MOF host ZrL1 [Zr₆O₄(OH)₇(L1)_4.5(H₂O)₄]. (1) The heavy-atom guests of AgSbF₆ induce order in the MOF host to allow the movable alkyne side arm to be fully located by X-ray diffraction, but they themselves curiously remain highly disordered and absent in the strucutral model. The enhanced order of the framework can be generally ascribed to interaction of the silver guests with the host alkyne and thioether functions, while the invisible heavy-atom guest represents a new phenomenon in the metalation of open framework materials. (2) The AgSbF₆ guests also participate in the thermocyclization of the vicinal alkyne units of the L1 linker (at 450 °C) and form the rare nanoparticle of Ag₃Sb supported on the concomitantly formed nanographene network. The resulted composite exhibits high electrical conductivity (1.0 S/cm) as well as useful, mitigated catalytic activity for selectively converting nitroarenes into the industrially important azo compounds, i.e., without overshooting to form the amine side products. The heterogeneous/cyclable catalysis entails only the cheap reducing reagents of NaBH₄, ethanol, and water, with yields being generally close to 90%.

A metal-organic framework supported iridium catalyst for the gas phase hydrogenation of ethylene

The mutable structures of metal-organic frameworks (MOFs) allow their use as novel supports for transition metal catalysts. Herein we prepare an iridium bis(ethylene) catalyst bound to the neutral N-donors of a MOF structure and show that the compound is a stable gas phase ethylene hydrogenation catalyst. The data illustrate the need to carefully consider the inner sphere (support) and outer sphere (anion) chemistry.

Highly Active Gas Phase Organometallic Catalysis Supported Within Metal-Organic Framework Pores

Metal-organic frameworks (MOFs) can act as a platform for the heterogenization of molecular catalysts, providing improved stability, allowing easy catalyst recovery and a route toward structural elucidation of the active catalyst. We have developed a MOF, 1, possessing vacant N,N-chelating sites which are accessible via the porous channels that penetrate the structure. In the present work, cationic rhodium(I) norbornadiene (NBD) and bis(ethylene) (ETH) complexes paired with both noncoordinating and coordinating anions have been incorporated into the N,N-chelation sites of 1 via postsynthetic metalation and facile anion exchange. Exploiting the crystallinity of the host framework, the immobilized Rh(I) complexes were structurally characterized using X-ray crystallography. Ethylene hydrogenation catalysis by 1·[Rh(NBD)]X and 1·[Rh(ETH)₂]X (X = Cl and BF₄) was studied in the gas phase (2 bar, 46 °C) to reveal that 1·[Rh(ETH)₂](BF₄) was the most active catalyst (TOF = 64 h^-1); the NBD materials and the chloride salt were notably less active. On the basis of these observations, the activity of the Rh(I) bis(ethylene) complexes, 1·[Rh(ETH)₂]BF₄ and 1·[Rh(ETH)₂]Cl, in butene isomerization was also studied using gas-phase NMR spectroscopy. Under one bar of butene at 46 °C, 1·[Rh(ETH)₂]BF₄ rapidly catalyzes the conversion of 1-butene to 2-butene with a TOF averaging 2000 h^-1 over five cycles. Notably, the chloride derivative, 1 [Rh(ETH)₂]Cl displays negligible activity in comparison. XPS analysis of the postcatalysis sample, supported by DFT calculations, suggest that the catalytic activity is inhibited by the strong interactions between a Rh(III) allyl hydride intermediate and the chloride anion.

Single-Site Cobalt-Catalyst Ligated with Pyridylimine-Functionalized Metal-Organic Frameworks for Arene and Benzylic Borylation

We report a highly active single-site heterogeneous cobalt-catalyst based on a porous and robust pyridylimine-functionalized metal-organic frameworks (pyrim-MOF) for chemoselective borylation of arene and benzylic C-H bonds. The pyrim-MOF having UiO-68 topology, constructed from zirconium-cluster secondary building units and pyridylimine-functionalized dicarboxylate bridging linkers, was metalated with CoCl₂ followed by treatment of NaEt₃BH to give the cobalt-functionalized MOF-catalyst (pyrim-MOF-Co). Pyrim-MOF-Co has a broad substrate scope, allowing the C-H borylation of halogen-, alkoxy-, alkyl-substituted arenes as well as heterocyclic ring systems using B₂pin₂ or HBpin (pin = pinacolate) as the borylating agent to afford the corresponding arene- or alkyl-boronate esters in good yields. Pyrim-MOF-Co gave a turnover number (TON) of up to 2500 and could be recycled and reused at least 9 times. Pyrim-MOF-Co was also significantly more robust and active than its homogeneous control, highlighting the beneficial effect of active-site isolation within the MOF framework that prevents intermolecular decomposition. The experimental and computational studies suggested (pyrim^•-)Co^I(THF) as the active catalytic species within the MOF, which undergoes a mechanistic pathway of oxidative addition, turnover limiting σ-bond metathesis, followed by reductive elimination to afford the boronate ester.

Self-assembly of a cobalt(II)-based metal-organic framework as an effective water-splitting heterogeneous catalyst for light-driven hydrogen production

The solar photocatalysis of water splitting represents a significant branch of enzymatic simulation by efficient chemical conversion and the generation of hydrogen as green energy provides a feasible way for the replacement of fossil fuels to solve energy and environmental issues. We report herein the self-assembly of a Co^II-based metal-organic framework (MOF) constructed from 4,4',4'',4'''-(ethene-1,1,2,2-tetrayl)tetrabenzoic acid [or tetrakis(4-carboxyphenyl)ethylene, H₄TCPE] and 4,4'-bipyridyl (bpy) as four-point- and two-point-connected nodes, respectively. This material, namely, poly[(μ-4,4'-bipyridyl)[μ₈-4,4',4'',4'''-(ethene-1,1,2,2-tetrayl)tetrabenzoato]cobalt(II)], [Co(C₃₀H₁₆O₈)(C₁₀H₈N₂)]_n, crystallized as dark-red block-shaped crystals with high crystallinity and was fully characterized by single-crystal X-ray diffraction, PXRD, IR, solid-state UV-Vis and cyclic voltammetry (CV) measurements. The redox-active Co^II atoms in the structure could be used as the catalytic sites for hydrogen production via water splitting. The application of this new MOF as a heterogeneous catalyst for light-driven H₂ production has been explored in a three-component system with fluorescein as photosensitizer and trimethylamine as the sacrificial electron donor, and the initial volume of H₂ production is about 360 µmol after 12 h irradiation.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Chemical reactivity under nanoconfinement

Confining molecules can fundamentally change their chemical and physical properties. Confinement effects are considered instrumental at various stages of the origins of life, and life continues to rely on layers of compartmentalization to maintain an out-of-equilibrium state and efficiently synthesize complex biomolecules under mild conditions. As interest in synthetic confined systems grows, we are realizing that the principles governing reactivity under confinement are the same in abiological systems as they are in nature. In this Review, we categorize the ways in which nanoconfinement effects impact chemical reactivity in synthetic systems. Under nanoconfinement, chemical properties can be modulated to increase reaction rates, enhance selectivity and stabilize reactive species. Confinement effects also lead to changes in physical properties. The fluorescence of light emitters, the colours of dyes and electronic communication between electroactive species can all be tuned under confinement. Within each of these categories, we elucidate design principles and strategies that are widely applicable across a range of confined systems, specifically highlighting examples of different nanocompartments that influence reactivity in similar ways.