Stable Organic Diradicals Based on Fused Quinoidal Oligothiophene Imides with High Electrical Conductivity

An n-Type Open-Shell Conjugated Polymer with High-Spin Ground-State and High Intrinsic Electrical Conductivity

Open-shell conjugated polymers with a high intrinsic conductivity and high-spin ground state hold considerable promise for applications in organic electronics and spintronics. Herein, two novel acceptor-acceptor (A-A) conjugated polymers based on a highly electron-deficient quinoidal benzodifurandione unit have been developed, namely DPP-BFDO-Th and DPP-BFDO. The incorporation of the quinoidal moiety into the polymers backbones enables deeply aligned lower-lying lowest unoccupied molecular orbital (LUMO) levels of below -4.0 eV. Notably, DPP-BFDO exhibits an exceptionally low LUMO (-4.63 eV) and a high-spin ground state characterized by strong diradical characters. Moreover, a self-doping through intermolecular charge-transfer is observed for DPP-BFDO, as evidenced by X-ray photoelectron spectroscopy (XPS) studies. The high carrier concentration in combination with a planar and linear conjugated backbone yields a remarkable electrical conductivity (σ) of 1.04 S cm-1 in the "undoped" native form, ranking among the highest values reported for n-type radical-based conjugated polymers. When employed as an n-type thermoelectric material, DPP-BFDO achieves a power factor of 12.59 μW m-1 K-2. Furthermore, upon n-doping, the σ could be improved to 65.68 S cm-1. This study underscores the great potential of electron-deficient quinoidal units in constructing dopant-free n-type conductive polymers with a high-spin ground state and exceptional intrinsic conductivity.

N-Heterocyclic Carbene Analogues of Wittig Hydrocarbon

N-Heterocyclic carbene (NHC) analogues of Wittig hydrocarbon, [(NHC)(Stil)(NHC)] (3a-c) (NHC = SIPr (1a) = C[N(Dipp)CH2]2, Dipp = 2,6-iPr2C6H3; IPr (1b) = C[N(Dipp)CH]2; Me-IPr (1c) = C[N(Dipp)CMe]2 and Stil = C6H4CHCHC6H4) have been reported as crystalline solids. 3a-c are prepared by two-electron reductions of the corresponding bis-1,3-imidazoli(ni)um bromides [(NHC)(Stil)NHC)](Br)2 (2a-c) with KC8 in >94 % yields. 2a-c are accessible by the nickel catalyzed direct C-C coupling of NHCs (1a-c) with (E)-4,4'-dibromostilbene. One-electron oxidation of 3a,b yields the corresponding radical cations [(NHC)(Stil)NHC)]B(C6F5)4 4a,b. All compounds have been characterized by UV-Vis/NMR/EPR spectroscopy as well as 2a, 3a, and 3b by single crystal X-ray diffraction. The electronic structures of representative systems have been analyzed by quantum chemical calculations.

Sulfone-Functionalized Chichibabin's Hydrocarbons: Stable Diradicaloids with Symmetry Breaking Charge Transfer Contributing to NIR Emission beyond 900 nm

While monoradical emitters have emerged as a new route toward efficient organic light-emitting diodes, the luminescence property of organic diradicaloids is still scarcely explored. Herein, by devising a novel radical-radical coupling-based synthetic approach, we report a new class of sulfone-functionalized Chichibabin's hydrocarbon derivatives, SD-1-3, featuring varied substituent patterns and moderate to high diradical characters of 0.44-0.70, as highly stable diradicaloids with rarely seen NIR emission beyond 900 nm. Via comprehensive experimental and theoretical investigations, we reveal that the optoelectronic and magnetic properties of these materials are significantly tuned by the variations of substitutions (H/CF3/OMe) on the molecular skeletons. More importantly, quantum chemical computations indicate that the embedding of sulfone groups has contributed to a breaking of their quasi-C2 symmetry of these diradicaloid molecules and results in an excited-state charge transfer character. Therefore, a remarkably deep NIR emissive wavelength of up to 998 nm, together with a large Stokes shift (∼386 nm), is achieved for the CF3-based SD-2 molecule in tetrahydrofuran. To the best of our knowledge, such a luminescent wavelength of SD-2 has represented the longest wavelengths among the currently reported organic fluorescent radicals. Overall, our work not only establishes a new synthetic approach toward stable Chichibabin's hydrocarbons but also paves the way for designing NIR emissive open-shell materials with both fundamental understanding and feasible control of their luminescent properties.

bay/ortho-Octa-substituted Perylene: A Versatile Building Block toward Novel Polycyclic (Hetero)Aromatic Hydrocarbons

ConspectusPolycyclic (hetero)aromatic hydrocarbons (PAHs) have emerged as a focal point in current interdisciplinary research, spanning the realms of chemistry, physics, and materials science. Possessing distinctive optical, electronic, and magnetic properties, these π-functional materials exhibit significant potential across diverse applications, including molecular electronic devices, organic spintronics, and biomedical functions, among others. Despite the extensive documentation of various PAHs over the decades, the efficient and precise synthesis of π-extended PAHs remains a formidable challenge, hindering their broader application. This challenge is primarily attributed to the intricate and often elusive nature of their synthesis, compounded by issues related to low solubility and unfavored stability.The development of π-building blocks that can be facilely and modularly transformed into diverse π-frameworks constitutes a potent strategy for the creation of novel PAH materials. For instance, based on the classic perylene diimide (PDI) unit, researchers such as Würthner, Wang, and Nuckolls have successfully synthesized a plethora of structurally diverse PAHs, as well as numerous other π-functional materials. However, until now the availability of such versatile building blocks is still severely limited, especially for those simultaneously having a facile preparation process, adequate solubilizing groups, favored material stability, and critically, rich possibilities for structural extension spaces.In this Account, we present an overview of our invention of a highly versatile bay-/ortho-octa-substituted perylene building block, designated as Per-4Br, for the construction of a series of novel PAH scaffolds with tailor-made structures and rich optoelectronic and magnetic properties. First, starting with a brief discussion of current challenges associated with the bottom-up synthesis of π-extended PAHs, we rationalize the key features of Per-4Br that enable facile access to new PAH molecules including its ease of large-scale preparation, favored material stability and solubility, and multiple flexible reaction sites, with a comparison to the PDI motif. Then, we showcase our rational design and sophisticated synthesis of a body of neutral or charged, closed- or open-shell, curved, or planar PAHs via controlled annulative π-extensions in different directions such as peripheral, diagonal, or multiple dimensions of the Per-4Br skeleton. In this part, the fundamental structure-property relationships between molecular conformations, electronic structures, and self-assembly behaviors of these PAHs and their unique physiochemical properties such as unusual open-shell ground states, global aromaticity, state-associated/stimuli-responsive magnetic activity, and charge transport characteristics will be emphatically elaborated. Finally, we offer our perspective on the continued advancement of π-functional materials based on Per-4Br, which, we posit, may stimulate heightened research interest in the versatile structural motifs typified by Per-4Br, consequently catalyzing further progress in the realm of organic π-functional materials.

Sufficient driving force for quinoidal isoindigo-based diradicaloids with tunable diradical characters

Stable organic π-conjugated diradcialoids with tunable diradical characters can profoundly affect emerging technology. Over the past years, great efforts have been devoted to studying the structure-diradical character relationship in diradicaloids. Herein, a series of quinoidal isoindigo (IID) compounds with different attached terminal end groups were designed. Detailed analysis focuses on elucidating the driving force for evoking and enhancing the diradical character in the quinoidal IID systems. The arylene units of the IID core and the bridged aromatic units determine the contribution of the open-shell diradical form in the ground state. Diradical character y0 correlates well with bond length alternation (BLA), the total HOMA, and the total NICS(1)zz, and it is tuned by bridged aromatic units and terminal end groups in symmetric systems. The zwitterionic character weakens the diradical character in asymmetric systems to different extents. This work contributes to the deep understanding of evoking and enhancing the diradical character in quinoidal IID-based diradcialoids, providing useful guidelines to produce new molecules with desirable properties.

Multi-Selenophene Incorporated Thiazole Imide-Based n-Type Polymers for High-Performance Organic Thermoelectrics

Developing polymers with high electrical conductivity (σ) after n-doping is a great challenge for the advance of the field of organic thermoelectrics (OTEs). Herein, we report a series of thiazole imide-based n-type polymers by gradually increasing selenophene content in polymeric backbone. Thanks to the strong intramolecular noncovalent N⋅⋅⋅S interaction and enhanced intermolecular Se⋅⋅⋅Se interaction, with the increase of selenophene content, the polymers show gradually lowered LUMOs, more planar backbone, and improved film crystallinity versus the selenophene-free analogue. Consequently, polymer PDTzSI-Se with the highest selenophene content achieves a champion σ of 164.0 S cm-1 and a power factor of 49.0 μW m-1  K-2 in the series when applied in OTEs after n-doping. The σ value is the highest one for n-type donor-acceptor OTE materials reported to date. Our work indicates that selenophene substitution is a powerful strategy for developing high-performance n-type OTE materials and selenophene incorporated thiazole imides offer an excellent platform in enabling n-type polymers with high backbone coplanarity, deep-lying LUMO and enhanced mobility/conductivity.

Rational Design of an Air-Stable, High-Spin Diradical with Diazapyrene

Stable carbon-based polyradicals exhibiting strong spin-spin coupling and slow depolarization processes are particularly attractive functional materials. A new molecular motif synthesized by a convenient method that allows the integration of stable, high-spin radicals to (hetero)aromatic polycycles has been developed, as illustrated by a non-Kekulé diradical showing a triplet ground state with long persistency (τ1/2 ≈31 h) in air. Compared to the widely used 1,3-phenylene, the newly designed (diaza)pyrene-4,10-diyl moiety is for the first time demonstrated to confer ferromagnetic (FM) spin coupling, allowing delocalized non-disjoint SOMOs. With the X-ray crystallography unambiguously proving the diradical structure, the triplet ground state was thoroughly characterized. A large ΔES-T of 1.1 kcal/mol, proving the strong FM coupling effect, was revealed consistently by superconducting quantum interference device (SQUID) measurements and variable-temperature electron paramagnetic resonance (EPR) spectroscopy, while the zero-field splitting and triplet nutation characters were examined by continuous-wave and pulsed EPR spectroscopy. A millisecond spin-lattice relaxation time was also detected. The current study not only offers a new molecular motif enabling FM coupling between carbon-based spins, but more importantly presents a general method for installing stable polyradicals into functional π-systems.

Dark State of the Thiele Hydrocarbon: Efficient Solvatochromic Emission from a Nonpolar Centrosymmetric Singlet Diradicaloid

In this work, a comprehensive investigation of the photoinduced processes and mechanisms linked to the luminescence of a novel nonperchlorinated Thiele hydrocarbon (TTH) is presented. Despite the comparable diradical character of TTH (y0 = 0.32-0.44) and the unsubstituted Thiele hydrocarbon (TH) (y0 = 0.30), the polyhalogenated species is inert and photostable, showing an intense deep-red/near-infrared (NIR) fluorescence (photoluminescence quantum yield (PLQY) = 0.84 in toluene) even at room temperature and in the solid state (PLQY = 0.19). TTH displays a large Stokes shift (307 nm in benzonitrile) and solvatochromic behavior, which is unusual for a centrosymmetric, nonpolar, and low-conjugated species. These outstanding emission features are interpreted through quantum-chemical calculations, indicating that its fluorescence arises from the low-lying dark doubly excited zwitterionic state, typically found at low excitation energies in diradicaloids, acquiring dipole moment and intensity by state mixing via twisting around the strongly elongated exocyclic CC bonds of the excited p-quinodimethane (pQDM) core, with a mechanism similar to sudden polarization occurring in olefins. Such a mechanism is derived from ns and fs transient absorption measurements.

Self-Doped n-Type Quinoidal Compounds with Good Air Stability and High Electrical Conductivity for Organic Electronics

Air stable n-type conductive molecules with high electrical conductivities and excellent device performance have important applications in organic electronics, but their synthesis remains challenging. Herein, we report three self-doped n-type conductive molecules, designated QnNs, with a closed-shell quinoidal backbone and alkyl amino chains of different lengths. The QnNs are self-doped by intermolecular electron transfer from the amino groups to the quinoidal backbone. This process is ascertained unambiguously by experiments and theoretical calculations. The use of a quinoidal structure effectively improves the self-doping level, and thus increases the electrical conductivity of self-doped n-type conductive molecules achieved by a closed-shell structure from<10-4  S cm-1 to>0.03 S cm-1 . Furthermore, the closed-shell quinoidal structure results in good air stability of the QnNs, with half-lives>73 days; and Q4N shows an electrical conductivity of 0.019 S cm-1 even after exposure to air for 120 days. When applying Q6N as the cathode interlayer in organic solar cells (OSCs), an outstanding power conversion efficiency of up to 18.2 % was obtained, which represents one the best results in binary OSCs.

Stable Diradical on the Dimethyldihydropyrene Scaffold

The diradical character in a molecular architecture can be customized primarily in two ways: first, by employing a quinoidal pro-aromatic system with net energy gained by aromatization that compensates for the energy required to generate the diradical species and, second, by employing an antiaromatic system having easily accessible triplet states that impart a diradical character. We have chosen a 14π aromatic framework, Boekelheide's dimethyldihydropyrene, and perturbed its aromaticity through the construction of its quinoidal form. The perturbed aromaticity was evident from the bond alteration in the X-ray diffraction structure, 1H nuclear magnetic resonance chemical shifts, and quantum chemical calculations. The aromaticity was restored as the system underwent a transition to the biradical structure centered on two exocyclic carbons. In addition, upon photoexcitation and without using an external reducing reagent, the diradical could be converted to a radical anion and dianion form easily when dimethylformamide was used as a solvent.

Novel Application of NIR-I-Absorbing Quinoidal Conjugated Polymer as a Photothermal Therapeutic Agent

Conjugated polymer nanoparticles (CP NPs) that could absorb the first near-infrared (NIR-I) window have emerged as highly desirable therapeutic nanomaterials. Here, a quinoidal-conjugated polymer (QCP), termed PQ, was developed as a novel class of therapeutic agents for photothermal therapy (PTT). Owing to its intrinsic quinoid structure, PQ exhibits molecular planarity and π-electron overlap along the conjugated backbone, endowing it with a narrow band gap, NIR-I absorption, and diradical features. The obtained PQ was coated with a poly(ethylene glycol) (PEG) moiety, affording nanosized and water-dispersed PQ nanoparticles (PQ NPs), which consequently show a high photothermal conversion efficiency (PCE) of 63.2%, good photostability, and apparent therapeutic efficacy for both in vitro and in vivo PTTs under an 808 nm laser irradiation. This study demonstrates that QCPs are promising active agents for noninvasive anticancer therapy using NIR-I light.

p-Type Conjugated Polymers Containing Electron-Deficient Pentacyclic Azepinedione

Bisthienoazepinedione (BTA) has been reported for constructing high-performing p-type conjugated polymers in organic electronics, but the ring extended version of BTA is not well explored. In this work, we report a new synthesis of a key building block to the ring expanded electron-deficient pentacyclic azepinedione (BTTA). Three copolymers of BTAA with benzodithiophene substituted by different side chains are prepared. These polymers exhibit similar energy levels and optical absorption in solution and solid state, while significant differences are revealed in their film morphologies and behavior in transistor and photovoltaic devices. The best-performing polymers in transistor devices contained alkylthienyl side chains on the BDT unit (pBDT-BTTA-2 and pBDT-BTTA-3) and demonstrated maximum saturation hole mobilities of 0.027 and 0.017 cm2 V-1 s-1. Blends of these polymers with PC71BM exhibited a best photovoltaic efficiency of 6.78% for pBDT-BTTA-3-based devices. Changing to a low band gap non-fullerene acceptor (BTP-eC9) resulted in improved efficiency of up to 13.5%. Our results are among the best device performances for BTA and BTTA-based p-type polymers and highlight the versatile applications of this electron-deficient BTTA unit.

Efficient and air-stable n-type doping in organic semiconductors

Chemical doping of organic semiconductors (OSCs) enables feasible tuning of carrier concentration, charge mobility, and energy levels, which is critical for the applications of OSCs in organic electronic devices. However, in comparison with p-type doping, n-type doping has lagged far behind. The achievement of efficient and air-stable n-type doping in OSCs would help to significantly improve electron transport and device performance, and endow new functionalities, which are, therefore, gaining increasing attention currently. In this review, the issue of doping efficiency and doping air stability in n-type doped OSCs was carefully addressed. We first clarified the main factors that influenced chemical doping efficiency in n-type OSCs and then explain the origin of instability in n-type doped films under ambient conditions. Doping microstructure, charge transfer, and dissociation efficiency were found to determine the overall doping efficiency, which could be precisely tuned by molecular design and post treatments. To further enhance the air stability of n-doped OSCs, design strategies such as tuning the lowest unoccupied molecular orbital (LUMO) energy level, charge delocalization, intermolecular stacking, in situ n-doping, and self-encapsulations are discussed. Moreover, the applications of n-type doping in advanced organic electronics, such as solar cells, light-emitting diodes, field-effect transistors, and thermoelectrics are being introduced. Finally, an outlook is provided on novel doping ways and material systems that are aimed at stable and efficient n-type doped OSCs.

Deprotonation-Induced and Ion-Pairing-Modulated Diradical Properties of Partially Conjugated Pyrrole-Quinone Conjunction

Quinoidal molecules based on dipyrrolyldiketone boron complexes (QPBs), in which pyrrole units were connected by a partially conjugated system as a singlet spin coupler, were synthesized. QPB, which was stabilized by the introduction of a benzo unit at the pyrrole β-positions, formed a closed-shell tautomer conformation that showed near-infrared absorption. The deprotonated species, monoanion QPB^- and dianion QPB^2-, showing over 1000 nm absorption, were formed by the addition of bases, providing ion pairs in combination with countercations. Diradical properties were observed in QPB^2-, whose hyperfine coupling constants were modulated by ion-pairing with π-electronic and aliphatic cations, demonstrating cation-dependent diradical properties. VT NMR and ESR along with a theoretical study revealed that the singlet diradical was more stable than the triplet diradical.

Unraveling two distinct polymorph transition mechanisms in one n-type single crystal for dynamic electronics

Cooperativity is used by living systems to circumvent energetic and entropic barriers to yield highly efficient molecular processes. Cooperative structural transitions involve the concerted displacement of molecules in a crystalline material, as opposed to typical molecule-by-molecule nucleation and growth mechanisms which often break single crystallinity. Cooperative transitions have acquired much attention for low transition barriers, ultrafast kinetics, and structural reversibility. However, cooperative transitions are rare in molecular crystals and their origin is poorly understood. Crystals of 2-dimensional quinoidal terthiophene (2DQTT-o-B), a high-performance n-type organic semiconductor, demonstrate two distinct thermally activated phase transitions following these mechanisms. Here we show reorientation of the alkyl side chains triggers cooperative behavior, tilting the molecules like dominos. Whereas, nucleation and growth transition is coincident with increasing alkyl chain disorder and driven by forming a biradical state. We establish alkyl chain engineering as integral to rationally controlling these polymorphic behaviors for novel electronic applications.

Recent Research Progress of Organic Small-Molecule Semiconductors with High Electron Mobilities

Organic electronics has made great progress in the past decades, which is inseparable from the innovative development of organic electronic devices and the diversity of organic semiconductor materials. It is worth mentioning that both of these great advances are inextricably linked to the development of organic high-performance semiconductor materials, especially the representative n-type organic small-molecule semiconductor materials with high electron mobilities. The n-type organic small molecules have the advantages of simple synthesis process, strong intermolecular stacking, tunable molecular structure, and easy to functionalize structures. Furthermore, the n-type semiconductor is a remarkable and important component for constructing complementary logic circuits and p-n heterojunction structures. Therefore, n-type organic semiconductors play an extremely important role in the field of organic electronic materials and are the basis for the industrialization of organic electronic functional devices. This review focuses on the modification strategies of organic small molecules with high electron mobility at molecular level, and discusses in detail the applications of n-type small-molecule semiconductor materials with high mobility in organic field-effect transistors, organic light-emitting transistors, organic photodetectors, and gas sensors.

Revealing the Enhanced Thermoelectric Properties of Controllably Doped Donor-Acceptor Copolymer: The Impact of Regioregularity

Albeit considerable attention to the fast-developing organic thermoelectric (OTE) materials due to their flexibility and non-toxic features, it is still challenging to design an OTE polymer with superior thermoelectric properties. In this work, two "isomorphic" donor-acceptor (D-A) conjugated polymers are studied as the semiconductor in OTE devices, revealing for the first time the internal mechanism of regioregularity on thermoelectric performances in D-A type polymers. A higher molecular structure regularity can lead to higher crystalline order and mobility, higher doping efficiency, order of energy state, and thermoelectric (TE) performance. As a result, the regioregular P2F exhibits a maximum power factor (PF) of up to 113.27 µW m^-1  K^-2 , more than three times that of the regiorandom PRF (35.35 µW m^-1  K^-2 ). However, the regular backbone also implies lower miscibility with a dopant, negatively affecting TE performance. Therefore, the trade-off between doping efficiency and miscibility plays a vital role in OTE materials, and this work sheds light on the molecular design strategy of OTE polymers with state-of-the-art performances.

High n-type and p-type conductivities and power factors achieved in a single conjugated polymer

The charge transport properties of conjugated polymers are commonly limited by the energetic disorder. Recently, several amorphous conjugated polymers with planar backbone conformations and low energetic disorder have been investigated for applications in field-effect transistors and thermoelectrics. However, there is a lack of strategy to finely tune the interchain π-π contacts of these polymers that severely restricts the energetic disorder of interchain charge transport. Here, we demonstrate that it is feasible to achieve excellent conductivity and thermoelectric performance in polymers based on thiophene-fused benzodifurandione oligo(p-phenylenevinylene) through reducing the crystallization rate of side chains and, in this way, carefully controlling the degree of interchain π-π contacts. N-type (p-type) conductivities of more than 100 S cm^-1 (400 S cm^-1) and power factors of more than 200 μW m^-1 K^-2 (100 μW m^-1 K^-2) were achieved within a single polymer doped by different dopants. It further demonstrated the state-of-the-art power output of the first flexible single-polymer thermoelectric generator.

Recent advances in n-type and ambipolar organic semiconductors and their multi-functional applications

Organic semiconductors have received broad attention and research interest due to their unique integration of semiconducting properties with structural tunability, intrinsic flexibiltiy and low cost. In order to meet the requirements of organic electronic devices and their integrated circuits, p-type, n-type and ambipolar organic semiconductors are all necessary. However, due to the limitation in both material synthesis and device fabrication, the development of n-type and ambipolar materials is quite behind that of p-type materials. Recent development in synthetic methods of organic semiconductors greatly enriches the range of n-type and ambipolar materials. Moreover, the newly developed materials with multiple functions also put forward multi-functional device applications, including some emerging research areas. In this review, we give a timely summary on these impressive advances in n-type and ambipolar organic semiconductors with a special focus on their synthesis methods and advanced materials with enhanced properties of charge carrier mobility, integration of high mobility and strong emission and thermoelectric properties. Finally, multi-functional device applications are further demonstrated as an example of these developed n-type and ambipolar materials.

Terminal Cyano-Functionalized Fused Bithiophene Imide Dimer-Based n-Type Small Molecular Semiconductors: Synthesis, Structure-Property Correlations, and Thermoelectric Performances

n-Doped small molecular organic thermoelectric materials (OTMs) hold advantages of high Seebeck coefficient and better performance reproducibility over their polymeric analogues; however, high-performance n-type small molecular OTMs are severely lacking. We report here a class of small molecular OTMs based on terminal cyanation of a bithiophene imide-based ladder-type heteroarene BTI2. It was found that the cyanation could effectively lower the lowest unoccupied molecular orbital (LUMO) level from -2.90 eV (BTI2) to -4.14 eV (BTI2-4CN) and thus lead to significantly improved n-doping efficiency. Additionally, terminal cyano-functionalization can maintain the close packing and efficient intermolecular charge transfer between these cyanated molecules, thus yielding high electron mobilities of up to 0.40 cm2 V-1 s-1. Benefiting from its low LUMO-enabled efficient n-doping and high electron mobility, an encouraging n-type electrical conductivity of 0.43 S cm-1 and power factor (PF) of 6.34 μW m-1 K-2 were achieved for tetracyanated BTI2-4CN, significantly outperforming those of its noncynated BTI2 (<10-7 S cm-1, PF undetectable) and dicyanated BTI2-2CN (0.24 S cm-1, 1.78 μW m-1 K-2). These results suggest the great potential of the terminal cyanation strategy of ladder-type heteroarenes for developing high-performance small molecular OTMs.

Thiazole Imide-Based All-Acceptor Homopolymer with Branched Ethylene Glycol Side Chains for Organic Thermoelectrics

n-Type semiconducting polymers with high thermoelectric performance remain challenging due to the scarcity of molecular design strategy, limiting their applications in organic thermoelectric (OTE) devices. Herein, we provide a new approach to enhance the OTE performance of n-doped polymers by introducing acceptor-acceptor (A-A) type backbone bearing branched ethylene glycol (EG) side chains. When doped with 4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (N-DMBI), the A-A homopolymer PDTzTI-TEG exhibits n-type electrical conductivity (σ) up to 34 S cm^-1 and power factor value of 15.7 μW m^-1  K^-2 . The OTE performance of PDTzTI-TEG is far greater than that of homopolymer PBTI-TEG (σ=0.27 S cm^-1 ), indicating that introducing electron-deficient thiazole units in the backbone further improves the n-doping efficiency. These results demonstrate that developing A-A type polymers with EG side chains is an effective strategy to enhance n-type OTE performance.

A copper-catalyzed four-component reaction of arylcyclopropanes, nitriles, carboxylic acids and N-fluorobenzenesulfonimide: facile synthesis of imide derivatives

An unprecedented copper-catalyzed four-component reaction of arylcyclopropanes, nitriles, carboxylic acids and N-fluorobenzenesulfonimide (NFSI) has been successfully developed, which represents the first example of a four-component reaction of non-donor-acceptor cyclopropanes. A wide range of imide derivatives were efficiently synthesized in excellent yields under mild conditions.

Magnetic field induced alignment of macroradical epoxy for enhanced electrical properties

Improving the electrical performance of macroradical epoxy thermosets to surpass the semiconductor threshold requires a comprehensive understanding of the electrical charge transport mechanisms and characteristics. In this study, we investigate the electrical properties of a non-conjugated radical thermoset in a rigid, three-dimensional (3D) motif cured under an external magnetic field. The outcomes of the four-angle analysis of the synchrotron IRM beamline provide for the first time quantitative insights into the molecular orientation at the atomic-scale level. These insights, in turn, were utilized to apply Quantum Computational modeling theories and Monte Carlo simulation to study the effect of the magnetic field-induced molecular alignment on tuning electrical charge transport characteristics. The results explored the impact of radical density on forming percolation networks, showing a robust protocol for designing polymers with high electrical/thermal conductivity.

Recent Advances and Prospects of Small Molecular Organic Thermoelectric Materials

Thermoelectric (TE) materials possess unique energy conversion capabilities between heat and electrical energy. Small organic semiconductors have aroused widespread attention for the fabrication of TE devices due to their advantages of low toxicity, large area, light weight, and easy fabrication. However, the low TE properties hinder their large-scale commercial application. Herein, the basic knowledge about TE materials, including parameters affecting the TE performance and the remaining challenges of the organic thermoelectric (OTE) materials, are initially summarized in detail. Second, the optimization strategies of power factor, including the selection and design of dopants and structural modification of the dope-host are introduced. Third, some achievements of p- and n-type small molecular OTE materials are highlighted to briefly provide their future developing trend; finally, insights on the future development of OTE materials are also provided in this study.

Polymer Acceptors for High-Performance All-Polymer Solar Cells

All-polymer solar cells (all-PSCs) have attracted considerable attention owing to their pronounced advantages of excellent mechanical flexibility/stretchability and greatly enhanced device stability as compared to other types of organic solar cells (OSCs). Thanks to the extensive research efforts dedicated to the development of polymer acceptors, all-PSCs have achieved remarkable improvement of photovoltaic performance, recently. This review summarizes the recent progress of polymer acceptors based on the key electron-deficient building blocks, which include bithiophene imide (BTI) derivatives, boron-nitrogen coordination bond (B←N)-incorporated (hetero)arenes, cyano-functionalized (hetero)arenes, and fused-ring electron acceptors (FREAs). In addition, single-component-based all-PSCs are also briefly discussed. The structure-property correlations of polymer acceptors are elaborated in detail. Finally, we offer our insights into the development of new electron-deficient building blocks with further optimized properties and the polymers built from them for efficient all-PSCs.

Essential Role of Triplet Diradical Character for Large Magnetoresistance in Quinoidal Organic Semiconductor with High Electron Mobility

A diradicaloid molecule with high semiconducting performance is synthesized based on the quinoidal benzo[1,2-b:4,5-b']dithiophene structure. The diradical character is investigated by quantum chemical calculations and variable temperature electron spin resonance. The diode devices based on this molecule show a large change in electric current in magnetic fields below 100 mT with a strong dependence on the measurement temperatures; as the population of the triplet diradicals increases at high temperatures, the magnetoconductance (MC) values increase. As a result, a MC of -19.4% is achieved at 120 °C, which is the largest negative MC observed for organic molecules to date. In contrast, a smaller diradicaloid molecule based on quinoidal thieno[3,2-b]thiophene without thermally accessible triplet state shows no MC, indicating the essential role of the triplet diradicals. The strong correlation between the MC and the triplet diradical concentrations suggests that the charge conduction in the diradicaloid is suppressed through a spin-blocking mechanism, which can be controlled through the magnetic modulation of the hyperfine fields. The compound forms high-crystallinity thin films and has high monopolar electron transport in organic field-effect transistors, with an average mobility of 1.01 cm² V^-1 s^-1 for edge-cast films.

Tuning Diradical Properties of Boron-Containing π-Systems by Structural Isomerism

Tuning diradical character is an important topic for organic diradicaloids. Herein, we report the precise borylation enabling structural isomerism as an effective strategy to modulate diradical character and thereby properties of organic diradicaloids. We synthesized a new B-containing polycyclic hydrocarbon that has the indeno[1,2-b]fluorene π-skeleton with the β-carbons bonding to two boron atoms. Detailed theoretical and experimental results show that this bonding pattern leads to its distinctive electronic structures and properties in comparison to that of its isomeric molecule. This molecule has the efficient conjugation between boron atoms and π-skeleton, resulting in downshifted LUMO and HOMO levels. Moreover, it exhibits smaller diradical character and thereby inhibited diradical properties, such as significantly blue-shifted light absorption, larger energy bandgap and weak para-magnetic resonance. Notably, this B-containing polycyclic hydrocarbon possesses much stronger Lewis acidity and its Lewis acid-base adducts display enhanced diradical character, demonstrating the positive effects of Lewis coordination on modulating diradical performance.

Recent Developments of n-Type Organic Thermoelectric Materials: Influence of Structure Modification on Molecule Arrangement and Solution Processing

Organic semiconductor (OSCs) thermoelectric materials have been studied widely due to their low thermal conductivity and solution processing characteristics. Currently, the high conductivity (up to 1000 s cm^-1 ) has boosted the performance of p-type organic thermoelectric materials substantially. In contrast, the development of n-type organic thermoelectric materials is still limited by their low mobility, inferior air stability, and poor doping efficiency, which is relevant to the molecule structure and dopant dispersion. Herein, the recent development of n-type organic thermoelectric materials was reviewed with an emphasis on molecule structure modification and solution processing. Methods for optimizing conjugate structure were summarized from the effects of conjugated backbone modification and side chains diversification on molecular stacking. The primary n-type dopants were also summarized briefly. Especially, the role of solution aggregation controlling on film preparation and properties was given special attention. Additionally, the emergence of organic diradicals with low lowest unoccupied molecular orbital energy level and no doping was introduced, which shows great potential in n-type organic thermoelectric materials. All these endeavors have led to the development of n-type OSCs materials. This Review is aimed at illustrating the state-of-the-art progress and providing some guideline for the design of organic thermoelectric materials in the future.

Influence of the Radicaloid Character of Polyaromatic Hydrocarbon Couplers on Magnetic Exchange Interactions

The molecular properties of the conjugated spacers, such as the π-conjugation, aromaticity, length of the couplers, etc., that couple two localized spin-centers influence the intramolecular magnetic exchange interactions (2J) mediated...

Synthesis of 2,5-bis(9H-fluoren-9-ylidene)-2,5-dihydrothiophene derivatives and systematic study of the substituent effect

2,5-Bis(9H-fluoren-9-ylidene)-2,5-dihydrothiophene (ThBF) was potentially important for utilization as the organic semiconductor material. However, the study of the structure-property relationship for this compound was very limited due to its harsh synthesis....

Diamidocarbene-Based Thiele and Tschitschibabin Hydrocarbons: Carbonyl Functionalized Kekulé Diradicaloids

Herein, we report diamidocarbene (DAC)-based Thiele and Tschitschibabin hydrocarbons, diradicaloids that contain four carbonyl/amido functional groups. The impact of two different π-conjugated spacers, p-phenylene vs p,p'-biphenylene, has been realized. The quantum chemical calculations suggest diamidocarbene (DAC)-based Thiele hydrocarbon (p-phenylene bridged) closed-shell singlet is the ground state, whereas for the diamidocarbene (DAC)-based Tschitschibabin hydrocarbon (p,p'-biphenylene bridged), open-shell singlet is the ground state. The influence of two different π-conjugated spacers also has been reflected in their UV-vis spectra. To gain more information on the diamidocarbene (DAC)-based Thiele and Tschitschibabin hydrocarbons, we have also carried out cyclic voltammetry investigations along with UV-vis-NIR-spectroelectrochemical studies of their corresponding 2-e oxidized product.

Lactone Backbone Density in Rigid Electron-Deficient Semiconducting Polymers Enabling High n-type Organic Thermoelectric Performance

Three lactone-based rigid semiconducting polymers were designed to overcome major limitations in the development of n-type organic thermoelectrics, namely electrical conductivity and air stability. Experimental and theoretical investigations demonstrated that increasing the lactone group density by increasing the benzene content from 0 % benzene (P-0), to 50 % (P-50), and 75 % (P-75) resulted in progressively larger electron affinities (up to 4.37 eV), suggesting a more favorable doping process, when employing (N-DMBI) as the dopant. Larger polaron delocalization was also evident, due to the more planarized conformation, which is proposed to lead to a lower hopping energy barrier. As a consequence, the electrical conductivity increased by three orders of magnitude, to achieve values of up to 12 S cm and Power factors of 13.2 μWm^-1  K^-2 were thereby enabled. These findings present new insights into material design guidelines for the future development of air stable n-type organic thermoelectrics.

n-Type Organic and Polymeric Semiconductors Based on Bithiophene Imide Derivatives

ConspectusIn the last three decades, p-type (hole-transporting) organic and polymeric semiconductors have achieved great success in terms of materials diversity and device performance, while the development of n-type (electron-transporting) analogues greatly lags behind, which is limited by the scarcity of highly electron-deficient building blocks with compact geometry and good solubility. However, such n-type semiconductors are essential due to the existence of the p-n junction and a complementary metal oxide semiconductor (CMOS)-like circuit in organic electronic devices. Among various electron-deficient building blocks, imide-functionalized arenes, such as naphthalene diimide (NDI) and perylene diimide (PDI), have been proven to be the most promising ones for developing n-type organic and polymeric semiconductors. Nevertheless, phenyl-based NDI and PDI lead to sizable steric hindrance with neighboring (hetero)arenes and a high degree of backbone distortion in the resultant semiconductors, which greatly limits their microstructural ordering and charge transport. To attenuate the steric hindrance associated with NDI and PDI, a novel imide-functionalized heteroarene, bithiophene imide (BTI), was designed; however, the BTI-based semiconductors suffer from high-lying frontier molecular orbital (FMO) energy levels as a result of their electron-rich thiophene framework and monoimide group, which is detrimental to n-type performance.In this Account, we review a series of BTI derivatives developed via various strategies, including ring fusion, thiazole substitution, fluorination, cyanation, and chalcogen substitution, and elaborate the synthesis routes designed to overcome the synthesis challenges due to their high electron deficiency. After structural optimization, these BTI derivatives can not only retain the advantages of good solubility, a planar backbone, and small steric hindrance inherited from BTI but also have greatly suppressed FMO levels. These novel building blocks enable the construction of a great number of n-type organic and polymeric semiconductors, particularly acceptor-acceptor (or all-acceptor)-type polymers, with remarkable performance in various devices, including electron mobility (μ_e) of 3.71 cm² V^-1 s^-1 in organic thin-film transistors (OTFTs), a power conversion efficiency (PCE) of 15.2% in all-polymer solar cells (all-PSCs), a PCE of 20.8% in inverted perovskite solar cells (PVSCs), electrical conductivity (σ) of 0.34 S cm^-1 and a power factor (PF) of 1.52 μW m^-1 K^-2 in self-doped diradicals, and σ of 23.3 S cm^-1 and a PF of ∼10 μW m^-1 K^-2 in molecularly n-doped polymers, all of which are among the best values in each type of device. The structure-property-device performance correlations of these n-type semiconductors are elucidated. The design strategy and synthesis of these novel BTI derivatives provide important information for developing highly electron-deficient building blocks with optimized physicochemical properties. Finally, we offer our insights into the further development of BTI derivatives and semiconductors built from them.

B←N-Incorporated Dibenzo-azaacenes as n-Type Thermoelectric Materials

Organic thermoelectric materials play a vital role in flexible power generating applications, such as wearable electronics and sensor networks. While there is a wealth of research on p-type organic thermoelectric materials, developments on n-type counterparts as complementary are comparatively limited. Herein, we report a new kind of n-type small-molecule thermoelectric materials based on B←N-incorporated dibenzo-azaacenes 1,2-DBNA-2 and 1,2-DBNA-5. Because of the low-lying lowest unoccupied molecular orbital (LUMO) energy levels, 1,2-DBNA-2 and 1,2-DBNA-5 could be efficiently n-doped, and the rigid and almost planar skeleton could ensure good carrier transfer. When doped with a typical n-dopant (4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine (N-DMBI), 1,2-DBNA-5 exhibits a moderate conductivity of 0.01 S cm^-1 and a power factor of 0.06 μW m^-1 K^-2 with a Seebeck coefficient of -244.4 μV K^-1 in thermoelectric devices. These results not only demonstrate that B←N-incorporated dibenzo-azaacenes are a novel class of n-type thermoelectric materials but also highlight a new strategy to develop n-type organic thermoelectric materials.

High-yield and sustainable synthesis of quinoidal compounds assisted by keto-enol tautomerism

The classical synthesis of quinoids, which involves Takahashi coupling and subsequent oxidation, often gives only low to medium yields. Herein, we disclose the keto–enol-tautomerism-assisted spontaneous air oxidation of the coupling products to quinoids. This allows for the synthesis of various indandione-terminated quinoids in high isolated yields (85–95%). The origin of the high yield and the mechanism of the spontaneous air oxidation were ascertained by experiments and theoretical calculations. All the quinoidal compounds displayed unipolar n-type transport behavior, and single crystal field-effect transistors based on the micro-wires of a representative quinoid delivered an electron mobility of up to 0.53 cm² V⁻¹ s⁻¹, showing the potential of this type of quinoid as an organic semiconductor.

Facilitated by the highly efficient Pd-catalyzed coupling and keto–enol-tautomerism-assisted spontaneous air oxidation, various indandione-terminated quinoidal compounds have been synthesized in isolated yields up to 95%.

Accurate singlet-triplet gaps in biradicals via the spin averaged anti-Hermitian contracted Schrödinger equation

The accurate description of biradical systems, and in particular the resolution of their singlet-triplet gaps, has long posed a major challenge to the development of electronic structure theories. Biradicaloid singlet ground states are often marked by strong correlation and, hence, may not be accurately treated by mainstream, single-reference methods such as density functional theory or coupled cluster theory. The anti-Hermitian contracted Schrödinger equation (ACSE), whose fundamental quantity is the two-electron reduced density matrix rather than the N-electron wave function, has previously been shown to account for both dynamic and strong correlations when seeded with a strongly correlated guess from a complete active space (CAS) calculation. Here, we develop a spin-averaged implementation of the ACSE, allowing it to treat higher multiplicity states from the CAS input without additional state preparation. We apply the spin-averaged ACSE to calculate the singlet-triplet gaps in a set of small main group biradicaloids, as well as the organic four-electron biradicals trimethylenemethane and cyclobutadiene, and naphthalene, benchmarking the results against other state-of-the-art methods reported in the literature.

Dynamic Covalent Properties of a Novel Indolo[3,2-b]carbazole Diradical

This work describes the synthesis and properties of a dicyanomethylene-substituted indolo[3,2-b]carbazole diradical ICz-CN. This quinoidal system dimerises almost completely to (ICz-CN)₂ , which contains two long C(sp³ )-C(sp³ ) σ-bonds between the dicyanomethylene units. The minor open-shell ICz-CN component in the solid-state mixture was identified by EPR spectroscopy. Cyclic voltammetry and UV-visible spectroelectrochemical data, as well as comparison with reference monomer ICz-Br reveal that the nature of the one-electron oxidation of (ICz-CN)₂ at ambient temperature and ICz-CN at elevated temperature is very similar in all these compounds due to the prevailing localization of their HOMO on the ICz backbone. The peculiar cathodic behaviour reflects the co-existence of (ICz-CN)₂ and ICz-CN. The involvement of the dicyanomethylene groups stabilizes the close-lying LUMO and LUMO+1 of (ICz-CN)₂ and especially ICz-CN compared to ICz-Br, resulting in a distinctive cathodic response at low overpotentials. Differently from neutral ICz-CN, its radical anion and dianion are remarkably stable under ambient conditions. The UV/Vis(-NIR) electronic transitions in parent (ICz-CN)₂ and ICz-CN and their different redox forms have been assigned convincingly with the aid of TD-DFT calculations. The σ-bond in neutral (ICz-CN)₂ is cleaved in solution and in the solid-state upon soft external stimuli (temperature, pressure), showing a strong chromism from light yellow to blue-green. Notably, in the solid state, the monomeric diradical species is predominantly formed under high hydrostatic pressure (>1 GPa).

Anionic Boron- and Carbon-Based Hetero-Diradicaloids Spanned by a p-Phenylene Bridge

Herein we report the synthesis and characterization of anionic boron- and carbon-based Kekulé diradicaloids spanned by a p-phenylene bridge. In contrast to Thiele's hydrocarbon, a closed-shell singlet system, they show an appreciable population of the triplet state at room temperature, as evidenced by both NMR and EPR spectroscopy. Moreover, en route to these anionic boron- and carbon-based hetero-diradicaloids, the formation of an isolable diamino(4-diarylboryl-phenyl)methyl radical was observed.

Optoelectronic properties of diketopyrrolopyrrole homopolymers compared to donor-acceptor copolymers

Diketopyrrolopyrrole (DPP) is a component of a large number of materials used for optoelectronic applications. As it is exclusively used in combination with aromatic donors, the properties of its homopolymers are unknown. Because donor-acceptor character has been shown for other systems to reduce bandwidths, DPP homopolymers should have even larger conduction bands and better n-type conductivity than the thiophene-flanked systems, which have exceptional n-type conductivity and ambipolar character. Therefore, a theoretical study was carried out to elucidate the properties of the unknown DPP homopolymer. Calculations were done with density functional theory and with the complete active space self-consistent field method plus n-electron valence state perturbation theory for the dynamic correlation. Poly-DPP is predicted to have radical character and an extremely wide low-lying conduction band. If it were possible to produce this material, it should have unprecedented n-type conductivity and might be a synthetic metal. A comparison with various unknown donor-acceptor systems containing vinyl groups and thienyl rings with a higher concentration of DPP than the known copolymers reveals how donor-acceptor substitution reduces bandwidths and decreases electron affinities.