Use of Pollen Solid-Phase Extraction for the Determination of trans-Resveratrol in Peanut Oils

Exploration of Resveratrol as a Potent Modulator of α-Synuclein Fibril Formation

The molecular determinants of amyloid protein misfolding and aggregation are key for the development of therapeutic interventions in neurodegenerative disease. Although small synthetic molecules, bifunctional molecules, and natural products offer a potentially advantageous approach to therapeutics to remodel aggregation, their evaluation requires new platforms that are informed at the molecular level. To that end, we chose pulsed hydrogen/deuterium exchange mass spectrometry (HDX-MS) to discern the phenomena of aggregation modulation for a model system of alpha synuclein (αS) and resveratrol, an antiamyloid compound. We invoked, as a complement to HDX, advanced kinetic modeling described here to illuminate the details of aggregation and to determine the number of oligomeric populations by kinetically fitting the experimental data under conditions of limited proteolysis. The misfolding of αS is most evident within and nearby the nonamyloid-β component region, and resveratrol significantly remodels that aggregation. HDX distinguishes readily a less solvent-accessible, more structured oligomer that coexists with a solvent-accessible, more disordered oligomer during aggregation. A view of the misfolding emerges from time-dependent changes in the fractional species across the protein with or without resveratrol, while details were determined through kinetic modeling of the protected species. A detailed picture of the inhibitory action of resveratrol with time and regional specificity emerges, a picture that can be obtained for other inhibitors and amyloid proteins. Moreover, the model reveals that new states of aggregation are sampled, providing new insights on amyloid formation. The findings were corroborated by circular dichroism and transmission electron microscopy.

Current analytical strategies for the determination of resveratrol in foods

Resveratrol, a non-flavonoid polyphenolic compound, possesses various beneficial properties such as anti-cancer, anti-aging, anti-bacterial, and antioxidant effects. It is naturally produced by many plants in response to stimulation. However, the content of resveratrol in natural plants can vary significantly, ranging from micrograms to milligrams per kilogram. As the demand for resveratrol increases, the development of methods for extracting and quantifying resveratrol in food has become a rapidly growing field in recent years. This review aims to comprehensively summarize the progress made in resveratrol analysis in food over the past decade (2012-2022), with a specific focus on the latest advancements in extraction and detection technologies. The objective is to offer a valuable reference for further research and utilization of resveratrol in various food applications.

Comparison of different extraction methods of active ingredients of Chinese medicine and natural products

Like other traditional medicine in the world, Chinese traditional medicine (CTM) has a long history, which is a treasure of the combination of medicine and Chinese classical culture even more than 5000 years. For thousands of years, CTM has made great contributions to the reproduction and health of the Chinese people. It was an efficient therapeutic tool under the guidance of Chinese traditional medical theory, its source is generally natural products, but there are also a small number of it are natural products after some processing methods. In fact, the definition of Chinese medicine (CM) includes both traditional and new CM developed by modern technology. It is well known that the chemical composition of most CM and natural products is very complex, for example, a single herb may contain hundreds of different chemicals, including active ingredients, side effects, and even toxic ingredients. Therefore, the extraction process is particularly crucial for the quality and clinical efficacy of CM and natural products. In this work, a new classification method was proposed to divide the extraction technologies of CM and natural products into 21 kinds in recent years and analyze their status, advantages, and disadvantages. Then put forward a new technical route based on ultra-high-pressure extraction technology for rapid extraction else while removing harmful impurities and making higher utilization of CM and natural products. It is a useful exploration for the extraction industry of medicinal materials and natural products in the world.

A fully green sample preparation method for synthetic antioxidants determination in edible oils based on natural feather fiber-supported liquid extraction

The current study proposed a novel feather fiber-supported liquid extraction (FF-SLE) method for extracting analytes from oil samples. The natural feather fibers were used as the oil support material and directly loaded in the plastic tube of a disposable syringe to construct the low-cost extraction device (∼0.5 CNY). The edible oil without any pretreatment including dilution was added directly to the extraction device, followed by the addition of the green extraction solvent of ethanol. As an example, the proposed method was applied to extract nine synthetic antioxidants from edible oils. The optimized extraction conditions for processing 0.5 g of oil were obtained when the syringe dimension was 5 mL, the extraction solvent was 0.5 mL of ethanol, the amount of feather fibers was 200 mg of duck feather fibers and the static extraction time was 10 min. The applications to seven kinds of feathers and seven kinds of edible oils all indicated the excellent oil removal efficiencies (>98.0%). Combined with high-performance liquid chromatography-ultraviolet, a quantification method was validated with satisfied linearity (R²≥0.994), accuracy (95.8-114.6%) and precision (≤8.3%) with the limits of detection ranging from 50 to 100 ng/g. The proposed FF-SLE method was simple, effective, convenient, low-cost, green and environmental-friendly for the extraction of analytes from oil samples prior to instrument analysis.

Miniaturized kapok fiber-supported liquid extraction for convenient extraction of pesticide residues in vegetable oils: Determination of organochlorine pesticides as a proof-of-concept study

In this paper, a miniaturized kapok fiber-supported liquid extraction (mini-KF-SLE) method was proposed for selective extraction of pesticide residues in vegetable oils. The natural kapok fiber was used as an inert oil support material based on its hydrophobic and lipophilic properties, and the extraction device was conveniently constructed by loading 15 mg of kapok fiber at the lower middle part of a 1-mL pipette tip. The vegetable oil sample (150 mg) without any pretreatment was directly loaded, followed by the addition of 150 μL of acetonitrile (ACN) as the extractant. After static extraction for 30 min, the extractant was pipetted out with a pipettor. As the proof of concept, it was applied for extracting eight organochlorine pesticides (OCPs) from vegetable oils and the eluate was analyzed by gas chromatography-electron capture detector (GC-ECD). Under optimized conditions, the extraction recoveries of OCPs were calculated to be in ranges of 35.8-79.5%. The satisfied quantitation ability was verified by the established method with coefficients of determination (R²) being greater than 0.99. The limits of detection (LODs) were in ranges of 2.0-50.0 ng/g. The relative recoveries were in ranges of 78.3-117.0% with the inter-/intra-day relative standard deviation (RSD) both being less than 13.3%. The potential of mini-KF-SLE to extract other kinds of pesticides was further verified by the successful extracting three triazole pesticides in vegetable oils with good extraction recoveries (>41.4%). The proposed mini-KF-SLE in combination with instrument detection techniques has the great potential in the low-cost and high-throughput determination of various pesticide residues in vegetable oils.

Kapok fiber-supported liquid extraction for convenient oil samples preparations: A feasibility and proof-of-concept study

In this study, a novel kapok fiber-supported liquid extraction (KF-SLE) method was developed for conveniently extracting analytes from oil samples. Natural kapok fiber without any pretreatment was directly used as an oil support medium. The extraction device was conveniently constructed by directly packing some kapok fibers into a syringe tube. Due to the fibrous property of the kapok fiber, no filter plate was needed. The cost of a KF-SLE device was as low as 0.5 CNY. The KF-SLE process was conveniently conducted using a simple three-step protocol: (1) the oil sample without any pretreatment including dilution was added directedly; (2) then, the oil-immiscible extractant was added; (3) after waiting a certain time for static extraction, the extractant was eluted out by pressing the kapok fibers with the syringe plunger. The extractant could be directly transferred for subsequent instrumental detection. For the feasibility and proof-of-concept study, the method was applied to quantify four synthetic flavor chemicals in edible oils. Satisfied quantification results were obtained with the correlation coefficient (R²) being greater than 0.996, the relative recoveries ranging from 92.90% to 107.53% and intra- and inter-day RSDs being less than 7.56%. All in all, for the first time, the SLE technique was expanded to process oil samples and the method has the characteristics of low cost, environmental friendliness, high sample processing throughput and ease of automation, offering a promising approach for edible oil sample preparations.

Conductive polymer sorbent for extraction and determination of resveratrol and polydatin in Polygonum cuspidatum root samples

INTRODUCTION

The quantitative analysis of trace resveratrol and polydatin in plant tissues is suitable for elucidation of the compounds' mechanisms of action.

OBJECTIVES

The main objective of this work was to develop a feasible and effective sample pretreatment method to measure the concentrations of resveratrol and polydatin in complex samples.

METHODOLOGY

A polymer sorbent, poly(2-mercaptobenzimidazole), was electrochemically prepared and utilized for selective extraction, while resveratrol and polydatin were used as target analytes. The sorbent was characterized by cyclic voltammetry, scanning electron microscopy and Fourier transform infrared spectroscopy. After extraction and elution, the analytes were analyzed by a Thermo U3000 HPLC system. Several affecting parameters, including the volume of elution solution, sample pH value, sample flow rate and sample volume, were evaluated and optimized.

RESULTS

The proposed method showed good linearity with low limits of detection (from 0.5 to 0.8 ng·mL^-1 ) and ideal accuracy with spiked recoveries from 81.30% to 99.16%. A good enrichment factor (more than 200-fold) together with good sensitivity was obtained with this method. Analysis of resveratrol and polydatin in Polygonum cuspidatum samples by this method is efficient.

CONCLUSION

The method developed in this work exhibits several significant merits, including easy operation and high extraction efficiency, indicating that electrochemically prepared polymer sorbent is useful for sample pretreatment and analysis of traditional Chinese medicine samples.

Determination of fipronil and its metabolites in edible oil by pollen based solid-phase extraction combined with gas chromatography-electron capture detection

In this study, a convenient and economic method for the determination of fipronil and its three metabolites in edible oil was developed based on pollen grain solid-phase extraction (SPE). As a natural material, pollen grains exhibit well absorption capacity for some polar compounds due to their special functional structures. Their stable composition and appropriate particle size also make them suitable for SPE. In the present study, natural pine pollen grains without broken wall were used as sorbent for selective isolation and enrichment of fipronil and its three metabolites from edible oils based on hydrogen bond interaction. Several parameters influencing the extraction recoveries were investigated. By coupling with gas chromatography-electron capture detection (GC-ECD), a new method for analysis of fipronil and its metabolites in edible oils was established. The linearity range was 2-200 ng/g with correlation coefficient R² more than 0.999. The recoveries in edible oils at three spiked concentrations were in the range of 80.1-96.0% with the RSDs less than 10.6% (intra-day) and 11.5% (inter-day). The limit of detection (LOD) for four target analytes were in the range of 0.2-0.6 ng/g, which was comparable to the previous reported methods. Finally, the established method was successfully applied to detect fipronil and its metabolites in several oil samples with different brands from local market.

Infrared assisted extraction of bioactive compounds from plant materials: Current research and future prospect

The extraction of bioactive compounds from plant materials has attracted much attention due to their potential therapeutic effects. This article reviews the basic principles, characteristics, and recent applications of infrared assisted extraction (IAE) of bioactive compounds from plant materials. The advantages and disadvantages of IAE are considered, and operation mode and technological improvements, processes, solvents used and other future developments are identified. The review indicated that IAE was a simple, rapid, and cost-effective technique with the capacity for industrial scale application. Future research should focus on energy consumption reduction, green chemistry extraction processes, simplified operation steps, intelligent extraction process, and the establishment of kinetic and thermodynamic models. This article provides a comprehensive understanding of the principles and applications of IAE for the preparation of bioactive compounds, which will be of benefit to researchers and users of the technology.

Solubility and physicochemical properties of resveratrol in peanut oil

The solubility and physicochemical properties of resveratrol in peanut oil were systematically studied following ultrasonic and magnetic stirring-assisted dissolution. The highest resveratrol solubility in peanut oil observed was 95.91%. The optimal dissolution process was determined to be the addition of 183.00 mg/kg resveratrol, a magnetic temperature of 40.00℃, and a magnetic duration of 3.50 h, which yielded a resveratrol content of 175.51 mg/kg oil. Under this standardized process, the oil composition remained unchanged. Resveratrol promoted the conversion of saturated triglycerides into unsaturated triglycerides, increased the linolenic acid content, and did not facilitate the formation of trans fatty acids. In addition, resveratrol preservedthe lightcolor, decreased the peroxide and acid values by 30%, prolonged the shelf life by more than 2 folds, and improved the thermal stability. In this sense, peanut oil with resveratrol can serve as anti-isomerism and antioxidant additive.

Economical irregular silica as an effective dispersive solid-phase extraction sorbent for the quantification of calcitriol in soft capsules

Calcitriol is an active product of vitamin D produced by the liver and kidney hydroxylase metabolism with strong physiological activity. It is the preferred form of medicine for patients with insufficient bone mineralization due to chronic kidney disease. Calcitriol soft capsule is one of the common preparation forms, the main drug content of which is very low (1.55 μg g^-1), and the pharmaceutical excipients interfere greatly, especially the oily matrix medium-chain triglycerides. Therefore, removing the interference of oily matrix is ​​the main challenge in the content determination. At present, the commonly used sample purification method for the determination of calcitriol in soft capsules is liquid-liquid extraction, but it usually consumes a lot of toxic organic solvents and it is costly. The adoption of SPE purification method, on the one hand, requires specific experimental equipment, and on the other hand, the organic solvent used in the experiment may cause the dissolution of SPE column tube materials, which will interfere with the subsequent detection. Herein, in order to achieve a cost-effective and reliable determination of calcitriol soft capsule content, we developed a dispersive solid-phase (DSPE) extraction method that directly uses irregular silica as sorbent, which is followed by high-performance liquid chromatography equipped with a UV detector(HPLC-UV)analysis. Selective retention of calcitriol is achieved by the polar interaction between calcitriol and silica, what's more, sufficient contact between washing solvent and sorbent can be guaranteed. Therefore, after pretreatment with DSPE, the interference of oily matrix on detection can be mostly removed and then improve the accuracy of the method compared to the SPE method. Under the optimal conditions of DSPE, calcitriol showed a good linear relationship in the range of 0.15-2.99 μg g^-1, the R² was 0.997. Satisfactory recoveries ranging from 101.1%-102.0% for calcitriol were achieved in the oily matrix at the levels of 0.75, 1.50 and 2.24 μg g^-1. And the intra-day and inter-day RSD were less than 2.5 % and 3.2 %. Meanwhile, the LOD and LOQ of calcitriol was 0.01 μg g^-1 and 0.02 μg g^-1, which is in full compliance with the regulatory level fixed by the EU, China or other countries. This method was further verified to determine the content of calcitriol in commercial calcitriol soft capsules and the recoveries of three batches of products was 86.2 %-94.4 %. Based on these characteristics, the proposed method makes it possible to determine the low content of weakly polar drugs in the oily matrix in a simple, low-cost and reliable way.

Pollen grains as a low-cost, green, alternative sorbent for hydrophilic solid-phase extraction

Many natural products have demonstrated functionality as novel, green sorbents for organic compounds. However, only limited reports exist on the use of such green materials as solid-phase extraction (SPE) sorbents for select organic acids. In this study, we employed pollen grains as a hydrophilic sorbent and investigated the influence of various extraction parameters using a series of experimental designs. The chemical structure and surface properties of the prepared sorbent were investigated by Fourier-transform infrared spectroscopy and scanning electron microscopy. The Plackett-Burman design was used to experimentally screen for parameters that significantly influenced the extraction performance. Three selected parameters were then statistically optimized by applying a central composite design combined with a response surface methodology. Phenolic acid residues were determined and quantified using high performance liquid chromatography with ultraviolet detection; a mass spectrometric detector in the selected ion monitoring mode was also used for identification. As a practical example, phenolic acids in the soil were successfully separated by the developed pollen sorbent. These results therefore indicate that pollen grains can be considered as a sustainable, green, and safe alternative to bare silica for extraction and separation applications.

Application of natural cotton fibers as an extraction sorbent for the detection of trans-resveratrol in adulterated peanut oils

The current study develops an effective, convenient, low-cost, and environmentally friendly method for determining trans-resveratrol (TRA) in peanut oils, the unique proportion of peanut oil, by employing natural cotton fibers without any pretreatment as extraction sorbent and an in-syringe extraction device. The primary factors affecting the extraction recovery are optimized in detail. The condition of 200.0 mg of cotton fibers, six push-pull times, 2.0 mL of n-hexane as washing solvent and 2.0 mL of ethanol as desorption solvent is selected as the best. The linear range is demonstrated to be 10-1000 ng/g with a satisfactory correlation coefficient (R² = 0.9995), while the limit of detection is calculated as 2.47 ng/g. In addition, the recoveries of TRA are obtained in the range of 93.8-104.4% with RSDs less than 5.5%. Finally, the developed method is successfully applied to determine TRA concentrations in commercial peanut oils and other edible oils.

Returning to Nature for the Design of Sorptive Phases in Solid-Phase Microextraction

Green analytical chemistry principles aim to minimize the negative impact of analytical procedures in the environment, which can be considered both at close (to ensure the safety of the analysts) and global (to conserve our natural resources) levels. These principles suggest, among other guidelines, the reduction/minimization of the sample treatment and the use of renewable sources when possible. The first aspect is largely fulfilled by microextraction, which is considered to be among the greenest sample treatment techniques. The second consideration is attainable if natural products are used as raw materials for the preparation of new extraction phases. This strategy is in line with the change in our production system, which is being gradually moved from a linear model (take–make–dispose) to a circular one (including reusing and recycling as key terms). This article reviews the potential of natural products as sorbents in extraction and microextraction techniques from the synergic perspectives of two research groups working on the topic. The article covers the use of unmodified natural materials and the modified ones (although the latter has a less green character) to draw a general picture of the usefulness of the materials.

New type of green extractant for oil production: Citric acid/citric acid sodium extraction system

Developing green solvents with low toxicity and low energy consumption is an important issue for edible oil production. In this study, a novel extraction system, specifically a citric acid/citric acid sodium mixture, was developed for oil extraction from seed crops. Peanut and pumpkin seeds were used to evaluate extraction efficiency and more than 70% and 57% oils, respectively, were extracted from peanut and pumpkin seeds at 4 °C. After extraction, the oils floated on the surface of the solution and could be separated from the solvent system without evaporation. The extraction of edible oils was achieved without the use of toxic chemicals or energy-intensive equipment. This study provided a green and efficient method, and showed the potential of the proposed citric acid/citric acid sodium extraction system for production of edible oils from natural sources.

Resveratrol: Review on its discovery, anti-leukemia effects and pharmacokinetics

Resveratrol, found in variety of plants, is a natural stilbene structure polyphenol. It has various pharmacological effects, such as antioxidation, anti-aging, anti-inflammation, anti-cancer, antiobesity, anti-diabetes, cardioprotection, neuroprotection. Recently, anti-leukemia activities of resveratrol has been studied extensively via its effects on a variety of biological processes involving cell proliferation, apoptosis, autophagy. Current treatments of leukemia mainly rely on intensive chemotherapy or hematopoietic stem cell transplantation, however, these treatments are still with poor survival and high treatment-related mortality. Therefore, it is extremely needed to find relatively non-toxic medicines with minimal side effects but sufficient therapeutic efficacy. Resveratrol is one such potential candidate owing to its reported anti-leukemia effect. In this review, we summarized resveratrol's discovery, sources and isolation methods, administration methods, effects in different types of leukemia, pharmacokinetics and toxicities, aiming to exploit resveratrol as a potential drug candidate for anti-leukemia.

Eco-friendly streamlined process for sporopollenin exine capsule extraction

Sporopollenin exine capsules (SECs) extracted from Lycopodium clavatum spores are an attractive biomaterial possessing a highly robust structure suitable for microencapsulation strategies. Despite several decades of research into SEC extraction methods, the protocols commonly used for L. clavatum still entail processing with both alkaline and acidolysis steps at temperatures up to 180 °C and lasting up to 7 days. Herein, we demonstrate a significantly streamlined processing regimen, which indicates that much lower temperatures and processing durations can be used without alkaline lysis. By employing CHN elemental analysis, scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), and dynamic image particle analysis (DIPA), the optimum conditions for L. clavatum SEC processing were determined to include 30 hours acidolysis at 70 °C without alkaline lysis. Extending these findings to proof-of-concept encapsulation studies, we further demonstrate that our SECs are able to achieve a loading of 0.170 ± 0.01 g BSA per 1 g SECs by vacuum-assisted loading. Taken together, our streamlined processing method and corresponding characterization of SECs provides important insights for the development of applications including drug delivery, cosmetics, personal care products, and foods.