Nickel-catalyzed borylation of halides and pseudohalides with tetrahydroxydiboron [B2(OH)4]

Pd-Catalyzed Miyaura Borylation and Telescopic Borylation/Suzuki-Miyaura Cross-Coupling Processes in Deep-Eutectic Solvents

We report an efficient procedure to carry out palladium-catalyzed Miyaura borylation reactions of (hetero)aromatic halides and triflates in choline chloride (ChCl)-based deep eutectic solvents (DESs). The procedure employs bis(pinacolato)diboron as a boron source and a catalyst prepared in situ from readily available Pd2(dba)3 and the phosphine ligand XPhos. Reactions proceed well in different ChCl-based DESs, among which the best results were provided by environmentally friendly and biodegradable mixtures with glycerol and glucose. The reaction tolerates both EDG and EWG substituents on the substrates and can be run on different halides (chloride, bromide, iodide) and pseudohalides (triflate). Furthermore, for several substrates, the catalyst loading can be reduced to 1 mol % Pd (0.5% mol Pd2(dba)3) without compromising the reaction yield. Moreover, we show that the Miyaura borylation protocol in DES can be combined with a subsequent Suzuki-Miyaura cross-coupling reaction in a one-pot procedure, allowing access to various biaryl products and demonstrating its synthetic utility by preparing the precursors of two compounds with reported applications in the photovoltaics sector. Finally, two green metrics (E-factor and EcoScale) of the new one-pot procedure in DES were calculated and compared with literature values to assess the potential advantages in terms of waste reduction, safety, and energy consumption.

Isolation and Reactivity of Arylnickel(II) Complexes in Nickel-Catalyzed Borylation of Aryl Fluorosulfates

Aryl fluorosulfates have emerged as versatile SuFExable substrates, harnessing the reactivity of the S-F bond. In this study, we unveil their alternative synthetic utility in nickel-catalyzed borylation via C-O bond activation. This method highlights mild reaction conditions, a broad substrate scope, and moderate functional group tolerance, rendering it a practical and appealing approach for synthesizing a diverse array of aryl boronate esters. Furthermore, computational analysis sheds light on the reaction pathways, uncovering the participation of LNi(0) and LNi(II)ArX species. This insight is supported by the 31P NMR reaction monitoring along with isolation and single-crystal X-ray structural elucidation of well-defined arylnickel(II) intermediates obtained from the oxidative addition of aryl fluorosulfates. A comprehensive investigation, merging experimental and computational approaches, deepens our understanding of the alternative reactivity of SuFExable substrates.

A Simple Nickel Metal-Organic Framework-Catalyzed Borylation of Aryl Chlorides and Bromides

We report a recyclable and efficient catalyst system based on a nickel-benzene tricarboxylic acid metal-organic framework (Ni-BTC MOF) for the borylation of aryl halides, including aryl chlorides, with bis(pinacolato)diboron, affording aryl boronate esters in high yields (up to >99% yield) with high selectivity. This protocol demonstrates broad functional group tolerance. Catalyst can be recyclable up to four times, and gram-scale reactions further highlights the usefulness of this method. In situ EPR experiments confirmed the formation of catalytically active Ni(I) species.

Achieving Nickel-Catalyzed Reductive C(sp2)-B Coupling of Bromoboranes via Reversing the Activation Sequence

Transition metal-catalyzed reductive cross-couplings to build C-C/Si bonds have been developed, but the reductive cross-coupling to create the C(sp2)-B bond has not been explored. Herein, we describe a nickel-catalyzed reductive cross-coupling between aryl halides and bromoboranes to construct a C(sp2)-B bond. This protocol offers a convenient approach for the synthesis of a wide range of aryl boronate esters, using readily available starting materials. Mechanistic studies indicate that the key to the success of the reaction is the activation of the B-Br bond of bromoboranes with a Lewis base such as 2-MeO-py. The activation ensures that bromoboranes will react with the active nickel(I) catalyst prior to aryl halides, which is different from the sequence of the general nickel-catalyzed reductive C(sp2)-C/Si cross-coupling, where the oxidative addition of an aryl halide proceeds first. Notably, this approach minimizes the production of undesired homocoupling byproduct without the requirement of excessive quantities of either substrate.

Discovery of the Potent and Selective MC4R Antagonist PF-07258669 for the Potential Treatment of Appetite Loss

The melanocortin-4 receptor (MC4R) is a centrally expressed, class A GPCR that plays a key role in the regulation of appetite and food intake. Deficiencies in MC4R signaling result in hyperphagia and increased body mass in humans. Antagonism of MC4R signaling has the potential to mitigate decreased appetite and body weight loss in the setting of anorexia or cachexia due to underlying disease. Herein, we report on the identification of a series of orally bioavailable, small-molecule MC4R antagonists using a focused hit identification effort and the optimization of these antagonists to provide clinical candidate 23. Introduction of a spirocyclic conformational constraint allowed for simultaneous optimization of MC4R potency and ADME attributes while avoiding the production of hERG active metabolites observed in early series leads. Compound 23 is a potent and selective MC4R antagonist with robust efficacy in an aged rat model of cachexia and has progressed into clinical trials.

Asymmetric Total Synthesis of Hasubanan Alkaloids: Periglaucines A-C, N,O-Dimethyloxostephine and Oxostephabenine

We report herein the asymmetric total synthesis of periglaucines A-C, N,O-dimethyloxostephine and oxostephabenine. The key strategies used include: 1) a Rh^I -catalyzed regio- and diastereoselective Hayashi-Miyaura reaction to connect two necessary fragments; 2) an intramolecular photoenolization/Diels-Alder (PEDA) reaction to construct the highly functionalized tricyclic core skeleton bearing a quaternary center; 3) a bio-inspired intramolecular Michael addition and transannular acetalization to generate the aza[4.4.3]propellane and the tetrahydrofuran ring.

Pd‐Catalyzed Difluoromethylations of Aryl Boronic Acids, Halides, and Pseudohalides with ICF 2 H Generated ex Situ

An expedient ex‐situ generation of difluoroiodomethane (DFIM) and its immediate use in a Pd‐catalyzed difluoromethylation of aryl boronic acids and ester derivatives in a two‐chamber reactor is reported. Heating a solution of bromodifluoroacetic acid with sodium iodide in sulfolane proved to be effective for the generation of near stoichiometric amounts of DFIM for the ensuing catalytic coupling step. A two‐step difluoromethylation of aryl (pseudo)halides with tetrahydroxydiboron as a low‐cost reducing agent, both promoted by Pd catalysis, proved effective to install this fluorine‐containing C₁ group onto several pharmaceutically relevant molecules. Finally, the method proved adaptable to deuterium incorporation by simply adding D₂O to the DFIM‐generating chamber.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)–carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)–metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM–E and TM–H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid–hydrogen and metalloid–metalloid bonds to unsaturated compounds; activation and functionalization of C–H bonds and C–X bonds with hydrometalloids and bismetalloids; activation and functionalization of C–H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

First-Row d-Block Element-Catalyzed Carbon-Boron Bond Formation and Related Processes

Organoboron reagents represent a unique class of compounds because of their utility in modern synthetic organic chemistry, often affording unprecedented reactivity. The transformation of the carbon-boron bond into a carbon-X (X = C, N, and O) bond in a stereocontrolled fashion has become invaluable in medicinal chemistry, agrochemistry, and natural products chemistry as well as materials science. Over the past decade, first-row d-block transition metals have become increasingly widely used as catalysts for the formation of a carbon-boron bond, a transformation traditionally catalyzed by expensive precious metals. This recent focus on alternative transition metals has enabled growth in fundamental methods in organoboron chemistry. This review surveys the current state-of-the-art in the use of first-row d-block element-based catalysts for the formation of carbon-boron bonds.

Ni-Catalyzed Borylation of Aryl Sulfoxides

A nickel/N-heterocyclic carbene (NHC) catalytic system has been developed for the borylation of aryl sulfoxides with B2 (neop)2 (neop=neopentyl glycolato). A wide range of aryl sulfoxides with different electronic and steric properties were converted into the corresponding arylboronic esters in good yields. The regioselective borylation of unsymmetric diaryl sulfoxides was also feasible leading to borylation of the sterically less encumbered aryl substituent. Competition experiments demonstrated that an electron-deficient aryl moiety reacts preferentially. The origin of the selectivity in the Ni-catalyzed borylation of electronically biased unsymmetrical diaryl sulfoxide lies in the oxidative addition step of the catalytic cycle, as oxidative addition of methoxyphenyl 4-(trifluoromethyl)phenyl sulfoxide to the Ni(0) complex occurs selectively to give the structurally characterized complex trans-[Ni(ICy)2 (4-CF3 -C6 H4 ){(SO)-4-MeO-C6 H4 }] 4. For complex 5, the isomer trans-[Ni(ICy)2 (C6 H5 )(OSC6 H5 )] 5-I was structurally characterized in which the phenyl sulfinyl ligand is bound via the oxygen atom to nickel. In solution, the complex trans-[Ni(ICy)2 (C6 H5 )(OSC6 H5 )] 5-I is in equilibrium with the S-bonded isomer trans-[Ni(ICy)2 (C6 H5 )(SOC6 H5 )] 5, as shown by NMR spectroscopy. DFT calculations reveal that these isomers are separated by a mere 0.3 kJ/mol (M06/def2-TZVP-level of theory) and connected via a transition state trans-[Ni(ICy)2 (C6 H5 )(η2 -{SO}-C6 H5 )], which lies only 10.8 kcal/mol above 5.

Hydrogen-Bonding Controlled Nickel-Catalyzed Regioselective Cyclotrimerization of Terminal Alkynes

Herein we report a hydrogen-bonding controlled nickel-catalyzed regioselective cyclotrimerization of terminal alkynes in moderate to excellent yields with high regioselectivities toward 1,3,5-trisubstituted benzenes. This method features a cheap catalyst, mild reaction conditions, and excellent functional group compatibility. The Ni-B(OH)₂ complex in situ generated from NiCl₂·DME and tetrahydroxydiboron might act as an active catalyst. After three consecutive cis-additions of terminal alkynes, internal migratory insertion cyclization, and β-boron elimination induced aromatization, 1,3,5-trisubstituted benzenes were selectively established.

Visible-Light-Induced Ni-Catalyzed Radical Borylation of Chloroarenes

A highly selective and general photoinduced C-Cl borylation protocol that employs [Ni(IMes)₂] (IMes = 1,3-dimesitylimidazoline-2-ylidene) for the radical borylation of chloroarenes is reported. This photoinduced system operates with visible light (400 nm) and achieves borylation of a wide range of chloroarenes with B₂pin₂ at room temperature in excellent yields and with high selectivity, thereby demonstrating its broad utility and functional group tolerance. Mechanistic investigations suggest that the borylation reactions proceed via a radical process. EPR studies demonstrate that [Ni(IMes)₂] undergoes very fast chlorine atom abstraction from aryl chlorides to give [Ni^I(IMes)₂Cl] and aryl radicals. Control experiments indicate that light promotes the reaction of [Ni^I(IMes)₂Cl] with aryl chlorides generating additional aryl radicals and [Ni^II(IMes)₂Cl₂]. The aryl radicals react with an anionic sp²-sp³ diborane [B₂pin₂(OMe)]^- formed from B₂pin₂ and KOMe to yield the corresponding borylation product and the [Bpin(OMe)]^•- radical anion, which reduces [Ni^II(IMes)₂Cl₂] under irradiation to regenerate [Ni^I(IMes)₂Cl] and [Ni(IMes)₂] for the next catalytic cycle.

Transition-Metal-Free Borylation of Aryl Bromide Using a Simple Diboron Source

In this study, we developed a simple transition-metal-free borylation reaction of aryl bromides. Bis-boronic acid (BBA), was used, and the borylation reaction was performed using a simple procedure at a mild temperature. Under mild conditions, aryl bromides were converted to arylboronic acids directly without any deprotection steps and purified by conversion to trifluoroborate salts. The functional group tolerance was considerably high. The mechanism study suggested that this borylation reaction proceeds via a radical pathway.

Photoinduced Deoxygenative Borylations of Aliphatic Alcohols

A photochemical method for converting aliphatic alcohols into boronic esters is described. Preactivation of the alcohol as a 2-iodophenyl-thionocarbonate enables a novel Barton-McCombie-type radical deoxygenation that proceeds efficiently with visible light irradiation and without the requirement for a photocatalyst, a radical initiator, or tin or silicon hydrides. The resultant alkyl radical is intercepted by bis(catecholato)diboron, furnishing boronic esters from a diverse range of structurally complex alcohols.

Effect of Modifier Structure on the Activation of Leukotriene A4 Hydrolase Aminopeptidase Activity

Activation of the leukotriene A4 hydrolase (LTA4H) aminopeptidase (AP) activity with 4-methoxydiphenylmethane (4MDM) promoted resolution of neutrophil infiltration in a murine cigarette smoke-induced model for emphysematous chronic obstructive pulmonary disease. Recently, 4-(4-benzylphenyl)thiazol-2-amine (ARM1) was published as a ligand for LTA4H with potential anti-inflammatory properties. To investigate the effect of modifier structure on enzyme kinetics of LTA4H, a series of analogues bearing structural features of ARM1 and 4MDM were synthesized using trifluoroborate Suzuki coupling reactions. Following, the 2.8 Å X-ray crystal structure of LTA4H complexed with 4-OMe-ARM1, a 4MDM-ARM1 hybrid molecule, was determined. Kinetic analysis showed that ARM1 and related analogues lowered affinity for the enzyme-substrate complex, resulting in a change of mechanism from hyperbolic mixed predominately catalytic activation (HMx(Sp < Ca)A) as observed for 4MDM to a predominately specific activation (HMx(Sp > Ca)A) mechanism. 4-OMe-ARM1 was then shown to dose responsively reduce LTB4 production in human neutrophils.

Enantioselective Conjugate Addition of Aryl Halides and Triflates to Electron-Deficient Olefins via Nickel- and Rhodium-Catalyzed Sequential Relay Reactions

Asymmetric conjugate addition of aryl halides or aryl triflates to electron-deficient olefins was realized by sequential Miyaura borylation and Hayashi-Miyaura conjugate addition in one pot. A nickel-catalyzed borylation of aryl halides or triflates and a rhodium-chiral diene complex catalyzed enantioselective conjugate addition was executed as a pair of relay reactions as a more efficient and greener protocol.

Novel Carbazole-Based N-Heterocyclic Carbene Ligands to Access Synthetically Relevant Stilbenes in Pd-Catalyzed Coupling Processes

A series of new carbazole-based N-heterocyclic carbene (NHC) ligands have been synthesized in a simple and facile synthetic route and subsequently used in a Pd/carbazole-based NHC catalytic system, which was found to be effective in catalyzing Heck reactions to provide substituted stilbene derivatives in good yields. Several bioactive stilbenes, including pterostilbene, pinosylvin, trimethoxy resveratrol, and resveratrol, were synthesized in good yields, and a 10 mmol scale-up was also performed for trimethoxy resveratrol. The synthetic application was also extended by performing a double-tandem chemoselective Heck reaction followed by Miyaura borylation in a one-pot procedure to give single-step access to synthetically useful stilbenyl boronate esters. Similarly, a unique triple-tandem protocol of a chemoselective Heck reaction/Miyaura borylation/Suzuki-Miyaura coupling reaction sequence was performed for the one-pot modification of biologically relevant molecules.

Organoboron chemistry comes to light: recent advances in photoinduced synthetic approaches to organoboron compounds

Photoinduced synthetic approaches to organoboron compounds have attracted significant attention in the recent years. Photochemical activation of organic molecules enables generation of reactive intermediates from a variety of precursors, resulting in borylation methods with improved and broader substrate scopes. The review summarizes recent developments in the area of photoinduced reactions of organoboron compounds with an emphasis on borylation of haloarenes, amine derivatives, and redox-active esters of carboxylic acids, as well as photoinduced rearrangements of organoboron compounds and photoinduced synthesis of organoboron compounds from alkenes and alkynes.

Direct Transformation from Arylamines to Aryl Naphthalene-1,8-diamino Boronamides: A Metal-Free Sandmeyer-Type Process

A direct metal-free transformation from arylamines to aryl naphthalene-1,8-diamino boronamides, a type of masked boronic acid, has been developed based on Sandmeyer-type reactions. A nonsymmetrical diboron reagent, B(pin)-B(dan), was utilized as the borylating reagent, and the B(dan) moiety was transferred to the aim products selectively. This conversion tolerated a series of functional groups, including chloro, bromo, fluoro, ester, hydroxy, cyano and amide.

Copper-catalysed borylation of aryl chlorides

The first example of a Cu-catalysed borylation of a wide range of aryl chlorides with different electronic and steric properties is mediated by a readily prepared NHC-stabilised Cu catalyst and KO^tBu. The aryl chlorides are converted into their corresponding arylboronic esters using B₂pin₂ or B₂neop₂ as the boron reagent.

Brush-First and ROMP-Out with Functional (Macro)monomers: Method Development, Structural Investigations, and Applications of an Expanded Brush-Arm Star Polymer Platform

The efficient synthesis of complex functional polymeric nanomaterials is often challenging. Ru-initiated ring-opening metathesis polymerization (ROMP) of multivalent macromonomers followed by cross-linking to form brush-arm star (BASP) polymers enables access to well-defined nano-structures with diverse functionality. This "brush-first" method leaves active Ru in the BASP microgel core, which could potentially be used in a subsequent "ROMP-out" (RO) step to introduce further modifications to the BASP structure via the addition of (macro)monomers. Here, we study this RO approach in depth. The efficiency of RO is assessed for a variety of BASP compositions using a combination of inductively coupled plasma mass spectrometry and gel permeation chromatography. To demonstrate the modularity of the RO process, arylboronic acid-functionalized BASPs were prepared; uptake of these RO-BASPs into hypersialylated cancer cells was enhanced relative to non-functionalized BASPs as determined by flow cytometry and fluorescence microscopy. In addition, the self-assembly of miktoarm BASPs prepared via brush-first and RO with different macromonomers is demonstrated. The combination of brush-first ROMP with RO provides a simple, modular strategy for access to a wide array of functional nanomaterials.

Ligation state of nickel during C-O bond activation with monodentate phosphines

The oxidative addition of phenolic electrophiles at Ni(0) in the presence of monodentate phosphine ligands was studied with both dispersion-free and dispersion-containing DFT methods. With the popular bulky ligand PCy3, consideration of dispersion has a striking effect on the predicted ligation state of nickel during oxidative addition of aryl sulfamates. Dispersioncontaining methods such as M06L indicate a clear preference for a bis-phosphine ligated transition state (TS), while dispersion free methods like B3LYP strongly favor a monophosphine ligated TS. This discrepancy in predicted ligation state is also found with small phosphines (PMe3) in combination with some aryl electrophiles (carbamates, acetates, pivalates, chlorides), but a bis-PMe3-ligated TS is predicted regardless of dispersion for other electrophiles (sulfamates, mesylates, tosylates). DFT calculations that include dispersion also offer a possible explanation for the observed poor efficacy of P t Bu3 as a ligand in Ni-catalyzed cross-coupling reactions.

Bedford-Type Palladacycle-Catalyzed Miyaura Borylation of Aryl Halides with Tetrahydroxydiboron in Water

A mild aqueous protocol for palladium catalyzed Miyaura borylation of aryl iodides, aryl bromides and aryl chlorides with tetrahydroxydiboron (BBA) as a borylating agent is developed. The developed methodology requires low catalyst loading of Bedford-type palladacycle catalyst (0.05 mol %) and works best under mild reaction conditions at 40 °C in short time of 6 h in water. In addition, our studies show that for Miyaura borylation using BBA in aqueous condition, maintaining a neutral reaction pH is very important for reproducibility and higher yields of corresponding borylated products. Moreover, our protocol is applicable for a broad range of aryl halides, corresponding borylated products are obtained in excellent yields up to 93% with 29 examples demonstrating its broad utility and functional group tolerance.

One-step highly selective borylation/Suzuki cross-coupling of two distinct aryl bromides in pure water

A one-step borylation/Suzuki cross-coupling of two distinct aryl bromides by Na₂PdCl₄ catalysis mediated by B₂(OH)₄ was developed in pure water, allowing the synthesis of various biaryls and heterobiaryls.

B(MIDA)-Containing Diborons

Unsymmetrical B(MIDA)-containing diborons of potential synthetic utility were found to be synthesized from the readily available (neop)B-B(neop) and (HO)₂B-B(OH)₂, and the procedure was extended to the generation of symmetrical (MIDA)B-B(MIDA). NMR and X-ray crystal structure studies revealed that B(MIDA) units of all of the diborons obtained in this study were in rigid tetrahedral environment.