Palladium-Catalyzed Thiocarbonylation of Iodoarenes with Thiols in Phosphonium Salt Ionic Liquids

Photochemical Synthesis of Thioesters from Aryl Halides and Carboxylic Acids

Thioesters are important in synthesis, materials science, and biology, and their preparation traditionally relies on the use of disagreeable thiols. Here, we report a thiol-free protocol that stitches together widespread carboxylic acids and aryl halides, producing a diverse array of thioesters. Crucial to this strategy is the discovery that tetramethylthiourea can serve as both a sulfur source and, upon direct excitation by purple light, as a strong reductant, suitable for activating aryl halides via single-electron transfer. Coupling of the resulting aryl radicals provides an isothiouronium ion intermediate, which can be attacked by carboxylic acids via a polar pathway, affording the thioester products under mild conditions.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

KF-catalyzed direct thiomethylation of carboxylic acids with DMSO to access methyl thioesters

With dimethyl sulfoxide (DMSO) as the methylthio source, a KF-catalyzed strategy was employed for the direct thiomethylation of carboxylic acids with DMSO for the preparation of methyl thioesters. In this process, a wide range of methyl thioesters were obtained in moderate to excellent yields. This novel strategy features the first use of DMSO as a methylthiolating agent for the construction of methyl thioesters, transition metal-free conditions, inexpensive reagents, easy workup, broad substrate scope and sustainability. Additionally, this procedure can be readily scaled up to a gram scale.

Visible Light-Accelerated Palladium-Catalyzed Thiocarbonylation Using Oxalic Acid Monothioester with Aryl/Alkenyl Sulfonium Salts

Herein, we present a decarboxylative thiocarbonylation of aryl and alkenyl sulfonium salts with oxalic acid monothioethers (OAMs), which can be achieved by visible light-accelerated palladium catalysis. Sulfonium salts are widely available, and OAM is an easily accessible and stored reagent; this mild reaction method can also be used for the synthesis of different types of thioester compounds. The reaction represents a new application of visible light-accelerated palladium catalysis in catalytic decarboxylative cross-couplings.

Base Dependent Rearrangement of Dithiane and Dithiolane under Visible-light Photoredox catalysis

The rearrangement of dithiolanes and dithianes to access disulfide-linked-dithioesters under visible-light photoredox catalysis via controlled C-S bond cleavage has been disclosed. Unlike, the usual deprotection of dithioacetals to corresponding aldehydes under the oxidative conditions, we observed unique regioselective oxidative reactivity of five and six membered cyclic dithioacetals to form disulfide-linked-dithioesters by exchanging DMAP and imidazole bases. The generality of the protocol has been demonstrated by exploring a wide range of substrates. As an application, in situ generated thiyl radical has been trapped with disulfides to prepare hetero-disulfides of potential utility. The protocol proved to be practical on gram scale quantity and relied on clean energy source for the transformation. Based on the series of control experiments, cyclic voltammetry and Stern-Volmer studies the plausible mechanism has been proposed.

Palladium-Catalyzed Thiocarbonylation of Aryl Iodides with S-Aryl Thioformates via Thioester Transfer

Herein we reported a novel approach to synthesize thioesters with S-aryl thioformates as thioester sources. The reaction proceeded at ambient temperature using widely available starting ingredients, wherein the thioester moiety was smoothly transferred to aryl iodides from S-aryl thioformates. A variety of substrates with various electronic natures were all tolerated under the reaction conditions to furnish desirable thioesters in ranges from moderate to excellent yields. The gram-scale reaction was also conducted, and there was virtually little change in chemical yield, indicating that large-scale synthesis of thioesters may be viable using this method.

Palladium-Catalyzed Desulfonative Carbonylation of Thiosulfonates: Elimination of SO2 and Insertion of CO

A palladium-catalyzed desulfonative carbonylation of thiosulfonates has been explored. Without any additive, a series of S-aryl/alkyl benzenesulfonothioates were successfully transformed to thioesters in moderate to excellent yields by SO₂ extrusion and CO insertion under the pressure of 1 bar of CO. The solvent dimethylacetamide (DMAc) facilitated this desulfonative carbonylation due to its high absorbing ability of SO₂.

Manganese(III)-promoted thiocarbonylation of alkylborates with disulfides: synthesis of aliphatic thioesters

A Mn(III)-promoted thiocarbonylation procedure toward the synthesis of thioesters has been developed. By employing easily available disulfides and potassium alkyltrifluoroborates as the starting materials, and cheap and non-toxic Mn(OAc)₃·2H₂O as the promotor, a broad range of thioesters were synthesized in good to excellent yields via radical intermediates.

Photocatalytic Activation of Elemental Sulfur Enables a Chemoselective Three-Component Thioesterification

A mild and chemoselective three-component thioesterification using olefins, α-ketoacids, and elemental sulfur has been developed. The photocatalytic activation of elemental sulfur, a cheap and abundant sulfur source, enables the rapid installation of a sulfur atom into molecules, reactions that ordinarily would require the use of reactive and malodorous sulfur-containing compounds such as thiols and thioacids. This novel reaction is characterized by high yields and a broad substrate scope, which enables the introduction of thioester moieties into complex molecules including a steroid, a peptide, and a nonprotected glycoside. Mechanistic studies indicated that the success of this transformation depends on the multiple roles played by the elemental sulfur, including those of a sulfurizing agent, a terminal oxidant, and a HAT mediator.

Rh(I)-Catalyzed Intramolecular Decarbonylation of Thioesters

Decarbonylative synthesis of thioethers from thioesters proceeds in the presence of a catalytic amount of [Rh(cod)Cl]₂ (2 mol %). The protocol represents the first Rh-catalyzed decarbonylative thioetherification of thioesters to yield valuable thioethers. Notable features include the absence of phosphine ligands, inorganic bases, and other additives and excellent group tolerance to aryl chlorides and bromides that are problematic using other metals to promote decarbonylation. Gram scale synthesis, late-stage pharmaceutical derivatization, and orthogonal site-selective cross-couplings by C-S/C-Br cleavage are reported.

Palladium-Catalyzed Linear Hydrothiocarbonylation of Unactivated Terminal Alkenes: Synthesis of Aliphatic Thioesters

A Pd-catalyzed hydrothiocarbonylation of unactivated terminal alkenes is presented. According to this protocol, aliphatic thioesters were synthesized with exclusive linear selectivity under mild reaction conditions. Good to excellent yields (up to 91% yield), broad substrate scope, broad functional group tolerance, and utility of the method demonstrated the advantages of this protocol.

Rhodium-catalyzed carbonylative coupling of alkyl halides with thiols: a radical process faster than easier nucleophilic substitution

How to make a carbonylative coupling faster than the easier nucleophilic substitution? In this communication, a rhodium-catalyzed radical-based carbonylative coupling of alkyl halides with thiolphenols has been realized. Thioesters were isolated in good yields in general.

Cu-Catalyzed Oxidative Thioesterification of Aroylhydrazides with Disulfides

An alternative thioesterification reaction via copper-catalyzed oxidative coupling of readily available aroylhydrazides with disulfides is developed, in which oxidative expulsion of N₂ overcomes the activation barrier between the carboxylic acid derivatives and the products. The reaction produces various thioesters in good to excellent yields with good functional group tolerance. In the reaction, stable and easily available aroylhydrazides are used as acyl sources and the relatively odorless disulfides are used as S sources. Mechanistic investigations demonstrate that the reaction of copper salt and oxidant (NH₄)₂S₂O₈ allows for achievement of tandem processes, including deprotonation, free-radical-mediated denitrogenation, and C-S bond formation.

Deaminative carbonylative thioesterification of activated alkylamines with thiophenols under transition-metal-free conditions

A transition-metal-free radical carbonylation of activated alkylamines with thiophenols has been successfully developed. Various thioesters were selectively produced with moderate to good yields.

Autocatalytic Synthesis of Thioesters via Thiocarbonylation of gem-Difluoroalkenes

Herein, we report a new method for the synthesis of acyethanethioates via thiocarbonylation of gem-difluoroalkenes with thiols. This reaction provides a new pathway to prepare thioesters under mild conditions without the use of any additives. Mechanistic studies revealed that in situ generated HF facilitated the C-F bond cleavage in an autocatalytic manner.

Versatile Visible-Light-Driven Synthesis of Asymmetrical Phosphines and Phosphonium Salts

Asymmetrically substituted tertiary phosphines and quaternary phosphonium salts are used extensively in applications throughout industry and academia. Despite their significance, classical methods to synthesize such compounds often demand either harsh reaction conditions, prefunctionalization of starting materials, highly sensitive organometallic reagents, or expensive transition-metal catalysts. Mild, practical methods thus remain elusive, despite being of great current interest. Herein, we describe a visible-light-driven method to form these products from secondary and primary phosphines. Using an inexpensive organic photocatalyst and blue-light irradiation, arylphosphines can be both alkylated and arylated using commercially available organohalides. In addition, the same organocatalyst can be used to transform white phosphorus (P4 ) directly into symmetrical aryl phosphines and phosphonium salts in a single reaction step, which has previously only been possible using precious metal catalysis.

Nickel-Catalyzed Reductive Aryl Thiocarbonylation of Alkene via Thioester Group Transfer Strategy

Herein reported is a nickel-catalyzed reductive aryl thiocarbonylation of alkene via thioester group transfer strategy by using simple and readily available thioesters. In contrast to traditional activation of weaker C(acyl)-S bond, the C(acyl)-C bond of thioester was selectively cleaved to enable this reaction under mild conditions. Furthermore, this approach features operational simplicity and broad substrate scope, providing a complementary and practical route for thioester synthesis without requiring toxic thiol or CO gas.

Synthesis of S-aryl thioesters via palladium-catalyzed thiocarbonylation of aryl iodides and aryl sulfonyl hydrazides

Aryl sulfonyl hydrazide reacted with aryl iodide in the presence of CO to give the corresponding S-aryl thioesters.

Recent advances in the synthesis of organophosphorus compounds via Kobayashi's aryne precursor: a review

This review systematically summarizes the progress in aryne chemistry for the synthesis of organophosphorus compounds via aryne insertion into the C–P, P–N, P–P, P–O, PP, PN and PS bonds.

Oxalic Acid Monothioester for Palladium-Catalyzed Decarboxylative Thiocarbonylation and Hydrothiocarbonylation

Oxalic acid monothioester (OAM), an easily accessible and storable reagent, was reported herein as a thioester synthetic equivalent for palladium-catalyzed decarboxylative thiocarbonylation of organohalides and hydrothiocarbonylation of unsaturated carbon-carbon bonds at room temperature with high chemo- and regioselectivity. The reaction is applicable to the synthesis of cysteine-derived thioesters, thus allowing chemical modification of cysteine-containing peptides. Decarboxylation of OAM proceeds through oxidative addition of Pd(0) to the acyl-S bond, which accounts for the very mild reaction conditions.

Nucleophilic phenylation: a remarkable application of alkoxymethyltriphenylphosphonium salts

A new application of α-alkoxymethylphosphonium salts in the nucleophilic phenylation of carbonyl compounds is demonstrated. Phenylation of aldehydes, ketones and acyl halides were studied by employing α-alkoxymethyltriphenylphosphonium halides in the presence of lithium hydroxide. New application of α-alkoxymethyltriphenylphosphonium salts. Metal-free, mild and selective phenylation. Easy preparation and handling of the reagent.

Aryne insertion into the PO bond: one-pot synthesis of quaternary phosphonium triflates

A novel transition-metal free synthetic strategy for the direct synthesis of quaternary phosphonium triflates via insertion of aryne into phosphine oxide.

One-pot regioselective synthesis of substituted pyrazoles and isoxazoles in PEG-400/water medium by Cu-free nano-Pd catalyzed sequential acyl Sonogashira coupling–intramolecular cyclization

Catalyst efficacy of in situ generated Pd-nanoparticles in the regioselective one-pot synthesis of substituted pyrazoles and isoxazoles via sequential coupling-cyclization methodology in environmentally benign medium is described.

Metal-free thioesterification of amides generating acyl thioesters

A base-initiated thioesterification of amides with various thiols is reported. This reaction can take place efficiently under metal-free and air-atmospheric conditions, and provides a facile and practically useful approach to the synthesis of valuable acyl thioesters.

Palladium-Catalyzed Insertion of Isocyanides into the C-S Bonds of Heteroaryl Sulfides

Insertion of tert-butyl isocyanide into the C(sp² )-S bonds of heteroaryl sulfides is catalyzed by a palladium diphosphine complex. Thioimidates generated through this reaction could be readily hydrolyzed under acidic conditions to yield the corresponding thioesters, which are of synthetic use. This insertion is useful because starting heteroaryl sulfides were readily prepared by either conventional ways or through sulfur-specific extended Pummerer reactions.

One-pot synthesis of thioesters with sodium thiosulfate as a sulfur surrogate under transition metal-free conditions

In this paper, we report an efficient synthetic method for thioester formation from sodium thiosulfate pentahydrate, organic halides, and aryl anhydrides. In the one-pot two-step reactions developed in this study, sodium thiosulfate was used as the sulfur surrogate for acylation with anhydrides, followed by substitution with organic halides through the in situ generation of thioaroylate. Furthermore, two important organic compounds could be successfully synthesized using our developed method. The advantages of the one-pot two-step reactions are operational simplicity, structurally diverse products with 42%-90% yields, use of relatively low toxic and odourless reagents, and easy applicability to large-scale operation.

Base-promoted ring opening of 3-chlorooxindoles for the construction of 2-aminoarylthioates and their transformation to quinazolin-4(3H)-ones

Cesium carbonate-promoted synthesis of diverse 2-aminoarylthioates via ring opening of 3-chlorooxindoles with thiols, and their synthetic applications is demonstrated.

Photoredox mediated nickel catalyzed C(sp3)-H thiocarbonylation of ethers

The first C(sp³)–H thiocarbonylation is achieved by visible light photoredox/Ni dual catalysis using thiobenzoates as the thioester group source.

The first direct C(sp³)–H thiocarbonylation reaction is achieved by visible light photoredox/Ni dual catalysis. The thioester group of thiobenzoate is transferred to the α-oxy carbon of various cyclic/acyclic ethers, which is the opposite to the commonly expected chemical reactivity involving acyl group transfer via the weaker C(acyl)–S activation. Through mechanistic studies, we proposed that the reaction is initiated by photocatalytic reduction and fragmentation of the thioester into an acyl radical and a thiolate. A nickel complex binds to the thiolate and induces the decarbonylation of the acyl radical to form an aryl radical, which abstracts hydrogen from the α-oxy carbon of the ether. The resulting α-oxy C(sp³) centered radical re-binds to the (RS)(CO)Ni complex, which undergoes CO migratory insertion and reductive elimination to give the desired thioester product.

The Development and Application of Two-Chamber Reactors and Carbon Monoxide Precursors for Safe Carbonylation Reactions

Low molecular weight gases (e.g., carbon monoxide, hydrogen, and ethylene) represent vital building blocks for the construction of a wide array of organic molecules. Whereas experimental organic chemists routinely handle solid and liquid reagents, the same is not the case for gaseous reagents. Synthetic transformations employing such reagents are commonly conducted under pressure in autoclaves or under atmospheric pressure with a balloon setup, which necessitates either specialized equipment or potentially hazardous and nonrecommended installations. Other safety concerns associated with gaseous reagents may include their toxicity and flammability and, with certain gases, their inability to be detected by human senses. Despite these significant drawbacks, industrial processes apply gaseous building blocks regularly due to their low cost and ready availability but nevertheless under a strictly controlled manner. Carbon monoxide (CO) fits with all the parameters for being a gas of immense industrial importance but with severe handling restrictions due to its inherent toxicity and flammability. In academia, as well as research and development laboratories, CO is often avoided because of these safety issues, which is a limitation for the development of new carbonylation reactions. With our desire to address the handling of CO in a laboratory setting, we designed and developed a two-chamber reactor (COware) for the controlled delivery and utilization of stoichiometric amounts of CO for Pd-catalyzed carbonylation reactions. In addition to COware, two stable and solid CO-releasing molecules (COgen and SilaCOgen) were developed, both of which release CO upon activation by either Pd catalysis or fluoride addition, respectively. The unique combination of COware with either COgen or SilaCOgen provides a simple reactor setup enabling synthetic chemists to easily perform safe carbonylation chemistry without the need for directly handling the gaseous reagent. With this technology, an array of low-pressure carbonylations were developed applying only near stoichiometric amounts of carbon monoxide. Importantly, carbon isotope variants of the CO precursors, such as (13)COgen, Sila(13)COgen, or even (14)COgen, provide a simple means for performing isotope-labeling syntheses. Finally, the COware applicability has been extended to reactions with other gases, such as hydrogen, CO2, and ethylene including their deuterium and (13)C-isotopically labeled versions where relevant. The COware system has been repeatedly demonstrated to be a valuable reactor for carrying out a wide number of transition metal-catalyzed transformations, and we believe this technology will have a significant place in many organic research laboratories.