Surface-Enhanced Raman Scattering: From Noble to Transition Metals and from Rough Surfaces to Ordered Nanostructures

Localized surface plasmon resonance (LSPR) excitation on single silver nanoring with nanoscale surface roughness

With the expansion of the application of high-sensitivity Surface-enhanced Raman scattering (SERS) technique, micro SERS-active substrates with rich optical properties and high-level functions are desired. In this study, silver nanorings with nanoscale surface roughness were fabricated as a new type of enclosed quasi-2D micro-SERS-active substrate. Highly-crystalline spherical and hemispherical silver nanoprotrusions were densely and uniformly distributed over the entire surface of the nanorings. The SERS signals were significantly enhanced on the roughened silver nanorings which were mainly derived from the maximal localized surface plasmon resonance (LSPR) points at the junctions between adjacent coupled nanoprotrusions on the roughened nanorings. The mapping image shows a uniform and intense LSPR enhancement over the nanorings, owing to the uniform and dense distribution of silver nanoprotrusions and the resulting uniform distribution of maximal LSPR points on the roughened nanorings. The dark-field spectra further indicated that the single roughened silver nanoring had significant LSPR enhancement, a wide LSPR frequency-range response, and adaptability for SERS enhancement. Notably, both the measured and simulated results demonstrate that the maximal LSPR enhancement at the junctions between the nanoprotrusions, which are distributed on the inner surface of the silver nanoring, is higher than that on the outer surface because of the plasmon-focusing effect of the enclosed silver nanoring, which leads to the lateral asymmetrical distribution of LSPR intensity, indicating more LSPR and SERS features. These results indicate that single roughened silver nanorings exhibit excellent performance as a new type of enclosed quasi-2D silver nanoring micro-SERS-active substrate, microzone LSPR catalysis, and micro/nanodevices.

Two-dimensional Janus monolayers SPtAZ2 (A = Si and Ge; Z = N, P, and As): insight into their photocatalytic properties via first-principles calculations

As a derivative of the two-dimensional material family, two-dimensional Janus materials have garnered widespread attention in recent years. Consequently, in this work, we systematically investigated the stability, electronic properties, photocatalytic properties, optical properties, and carrier mobility of SPtAZ2 (A = Si and Ge; Z = N, P, and As) monolayers using first-principles calculations. In the equilibrium state, we identified four stable structures that exhibited the properties of indirect band gap semiconductors using the HSE06 hybrid functional. Through the exploration of the photocatalytic and optical properties of these four stable structures, we observed that SPtSiN2, SPtSiP2, and SPtGeAs2 monolayers possess favorable band edge positions, high solar-to-hydrogen efficiency (up to 30.74%), and light absorption efficiency, thus endowing these three structures with commendable photocatalytic and light absorption performance. We additionally calculated the carrier mobility of these three structures and identified significant differences in electron and hole mobilities in the same direction, facilitating the effective separation of electrons and holes. Finally, we explored the effects of biaxial strain on the electronic properties, photocatalysis, and light absorption of stable SPtAZ2 monolayers. Our research results not only expand the 2D Janus material family, but also successfully predict a type of photocatalyst capable of utilizing visible light for overall water splitting.

Decoration of Ag nanoparticle on MXene sheets for SERS studies

MXene sheets with the unique electrical and optical properties show the excellent potential for surface-enhanced Raman spectroscopy (SERS) applications. In this study, we chose Ti3C2Tx, a type of MXene, to decorate silver nanoparticles (Ag NPs) on the ultrathin two-dimensional (2D) MXene sheets. The designed Ag-MXene substrates with SERS activity showed high sensitivity, high stability, and reproducibility. The SERS signal was enhanced by the synergistic contribution of both charge-transfer (CT) and surface plasmon resonance (SPR) involving the Ag NPs and the MXene sheets. Due to the strong interaction between the probe molecules and Ag NPs which provided the nanoscale gap, the substrate exhibited remarkable SERS performance. A novel experimental strategy was developed to facilitate the controlled synthesis of noble metal NPs and MXene sheets and provide insights for further improving the practical applications of these materials in SERS detection.

Confocal Surface-Enhanced Raman Imaging of the Intestinal Barrier Crossing Behavior of Model Nanoplastics in Daphnia Magna

Nanoplastics (nP) pose hazards to aquatic animals once they are ingested. Significant knowledge gaps exist regarding the nP translocation across the animal intestine, which is the first barrier between the ingested nP and the animal body. We examined the intestinal barrier crossing behavior of nP in an aquatic animal model (Daphnia magna) and determined the translocation mechanism with the help of model "core-shell" polystyrene nanoplastics (nPS) and confocal surface-enhanced Raman spectroscopy (SERS). The Raman reporter (4-mercaptobenzoic acid)-tagged gold "core" of the model nPS enables sensitive and reliable particle imaging by confocal SERS. This method detected SERS signals of model nPS concentration as low as 4.1 × 109 particles/L (equivalent to 0.27 μg/L PS "shell" concentration). The translocation was observed with the help of multilayer stacked Raman maps of SERS signals of the model nPS. With a higher concentration or longer exposure time of the model nPS, uptake and translocation of the plastic particles increased. In addition, we demonstrated that clathrin-dependent endocytosis and macropinocytosis were two major mechanisms underlying the translocation. This study contributes to a mechanistic understanding of nP translocation by using the pioneering model nPS and an analytical toolkit, which undergird further investigations into nP behavior and health effects in aquatic species.

Review of Biosensors Based on Plasmonic-Enhanced Processes in the Metallic and Meta-Material-Supported Nanostructures

Surface plasmons, continuous and cumulative electron vibrations confined to metal-dielectric interfaces, play a pivotal role in aggregating optical fields and energies on nanostructures. This confinement exploits the intrinsic subwavelength nature of their spatial profile, significantly enhancing light-matter interactions. Metals, semiconductors, and 2D materials exhibit plasmonic resonances at diverse wavelengths, spanning from ultraviolet (UV) to far infrared, dictated by their unique properties and structures. Surface plasmons offer a platform for various light-matter interaction mechanisms, capitalizing on the orders-of-magnitude enhancement of the electromagnetic field within plasmonic structures. This enhancement has been substantiated through theoretical, computational, and experimental studies. In this comprehensive review, we delve into the plasmon-enhanced processes on metallic and metamaterial-based sensors, considering factors such as geometrical influences, resonating wavelengths, chemical properties, and computational methods. Our exploration extends to practical applications, encompassing localized surface plasmon resonance (LSPR)-based planar waveguides, polymer-based biochip sensors, and LSPR-based fiber sensors. Ultimately, we aim to provide insights and guidelines for the development of next-generation, high-performance plasmonic technological devices.

Construction of the Au Nanoparticle/Graphene Oxide/Au Nanotube (AuNP/GO/AuNT) Sandwich Membrane for Surface-Enhanced Raman Scattering Sensing

Au nanotube-based composite membrane served as surface-enhanced Raman scattering (SERS) substrate with an ultralarge aspect ratio possesses an excellent flexibility and widely tunable surface plasmon resonance, and by introducing graphene oxide (GO) as a spacer layer, the SERS enhancement of the composite membrane is obviously better than those from the individual blocks of the Au nanotubes (AuNTS) membrane and the Au nanoparticle/graphene oxide (AuNP/GO) membrane. Such a "sandwich" (AuNP/GO/AuNT) structured membrane has a high SERS sensitivity and a wide tunability by controlling the size of Au nanoparticles and the thickness of graphene oxide, and the detection limits of the AuNP/GO/AuNT substrate for R6G and NBA are as low as 10-12 and 10-7 M, respectively; the large enhancement is attributed to the adsorption and chemical mechanism of graphene oxide and the physical mechanism of the Au nanoparticles and nanotubes (the electromagnetic field coupling between them).

Sixty years of electrochemical optical spectroscopy: a retrospective

Sixty years ago, Reddy, Devanatan, and Bockris performed the first in situ electrochemical ellipsometry experiment, which ushered in a new era in the study of electrochemistry, using optical spectroscopy. After six decades of development, electrochemical optical spectroscopy, particularly electrochemical vibrational spectroscopy, has advanced from a phase of immaturity with few methods and limited applications to a phase of maturity with excellent substrate generality and significantly improved resolutions. Here, we divide the development of electrochemical optical spectroscopy into four phases, focusing on the proof-of-concept of different electrochemical optical spectroscopy studies, the emergence of plasmonic enhancement-based electrochemical optical spectroscopic (in particular vibrational spectroscopic) methods, the realization of electrochemical vibrational spectroscopy on well-defined surfaces, and the efforts to achieve operando spectroelectrochemical applications. Finally, we discuss the future development trend of electrochemical optical spectroscopy, as well as examples of new methodology and research paradigms for operando spectroelectrochemistry.

A Dimode Scattering Method for Ultratrace Dinitrofuran Detection with Nanopalladium Molecularly Imprinted Polymer Nanocatalytic Probe

With four nanoparticles as the nanomatrix, dinotefuran (DNF) as the template molecule, N-isopropylacrylamide as the functional monomer, trimethylolpropane and trimethacrylate as the cross-linker, four nanosurface molecularly imprinted polymer (MIP) bifunctional probes were prepared by microwave synthesis. It was found that palladium nanosurface MIP (Pd@MIP) not only recognized DNF but also had the strongest catalytic effect on the new nanogold indicator reaction of acrylic acid-HAuCl4, which was evaluated quickly with the slope procedure developed by us. The generated gold nanoparticles (AuNPs) not only possessed the resonance Rayleigh scattering (RRS) effect but also strong surface-enhanced Raman scattering (SERS) activity. The combination of Pd@MIP with DNF enhanced the catalytic effect by coupling the nanosurface electrons with π-electrons, thus enhancing both scattering signals. A new Pd@MIP nanoprobe catalytic-SERS/RRS dual-mode analytical platform was developed for the specific and sensitive detection of DNF. The linear ranges of the SERS and RRS methods were 0.075-0.75 and 0.1-0.75 nmol/L, and the limits of detection were 0.03 and 0.06 nmol/L, respectively. The standard deviations were 0.54-2.39%, and the recoveries were 93-105%.

Density Functional Theory Study on the Interaction between Aflatoxin B1/M1 and Gold Substrate

Aflatoxin M1 (AFM1) and its precursor, Aflatoxin B1 (AFB1), are highly pathogenic and mutagenic substances, making the detection and sensing of AFB1/M1 a long-standing focus of researchers. Among various detection techniques, surface-enhanced Raman spectroscopy (SERS) is considered an ideal method for AFB1/M1 detection due to its ability not only to enhance characteristic frequencies but also to detect shifts in these frequencies with high repeatability. Therefore, we employed density functional theory in conjunction with surface-enhanced Raman spectroscopy to investigate the interaction between AFB1/M1 and a Au substrate in the context of the SERS effect for the first time. To predict the potential binding sites of AFB1/M1 and Au within the SERS effect, we performed calculations on the molecular electrostatic potential of AFB1/M1. Considering the crucial role of the binding energy in molecular docking studies, we computed the binding energy between two molecules interacting with Au at different binding sites. The molecular frontier orbitals and related chemical parameters of AFB1/M1 and "molecular-Au" complexes were computed to elucidate the alterations in AFB1/M1 molecules under the SERS effect. Subsequently, the theoretical Raman spectra of AFB1/M1 and the complexes were compared and analyzed, enabling determination of the adsorption conformation of AFB1/M1 on the gold surface based on SERS surface selection rules. These findings not only provide a deeper understanding of the interaction mechanism between molecules and substrates in the SERS effect but also offer theoretical support for developing novel aflatoxin SERS sensors.

Recent progress in SERS monitoring of photocatalytic reactions

Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical technique renowned for its ultra-high sensitivity. Extensive research in SERS has led to the development of a wide range of SERS substrates, including plasmonic metals, semiconductors, metal organic frameworks, and their assemblies. Some of these materials are also excellent photocatalysts, and by taking advantage of their bifunctional characteristics, the photocatalytic processes that occur on their surface can be monitored in situ via SERS. This provides us with unique opportunities to gain valuable insights into the intricate details of the photocatalytic processes that are challenging to access using other techniques. In this review, we highlight key development in in situ and/or real-time SERS-tracking of photocatalytic reactions. We begin by providing a brief account of recent developments in SERS substrates, followed by discussions on how SERS can be used to elucidate crucial aspects of photocatalytic processes, including: (1) the influence of the surrounding media on charge carrier extraction; (2) the direction of charge carrier transfer; (3) the pathway of photocatalytic activation; and (4) differentiation between the effects of photo-thermal and energetic electrons. Additionally, we discuss the benefits of tip-enhanced Raman spectroscopy (TERS) due to the ability to achieve high-spatial-resolution measurements. Finally, we address major challenges and propose potential directions for the future of SERS monitoring of photocatalytic reactions. By leveraging the capabilities of SERS, we can uncover new insights into photocatalytic processes, paving the way for advancements in sustainable energy and environmental remediation.

Unveiling practical considerations for reliable and standardized SERS measurements: lessons from a comprehensive review of oblique angle deposition-fabricated silver nanorod array substrates

Recently, there has been an exponential growth in the number of publications focusing on surface-enhanced Raman scattering (SERS), primarily driven by advancements in nanotechnology and the increasing demand for chemical and biological detection. While many of these publications have focused on the development of new substrates and detection-based applications, there is a noticeable lack of attention given to various practical issues related to SERS measurements and detection. This review aims to fill this gap by utilizing silver nanorod (AgNR) SERS substrates fabricated through the oblique angle deposition method as an illustrative example. The review highlights and addresses a range of practical issues associated with SERS measurements and detection. These include the optimization of SERS substrates in terms of morphology and structural design, considerations for measurement configurations such as polarization and the incident angle of the excitation laser, and exploration of enhancement mechanisms encompassing both intrinsic properties induced by the structure and materials, as well as extrinsic factors arising from wetting/dewetting phenomena and analyte size. The manufacturing and storage aspects of SERS substrates, including scalable fabrication techniques, contamination control, cleaning procedures, and appropriate storage methods, are also discussed. Furthermore, the review delves into device design considerations, such as well arrays, flow cells, and fiber probes, and explores various sample preparation methods such as drop-cast and immersion. Measurement issues, including the effect of excitation laser wavelength and power, as well as the influence of buffer, are thoroughly examined. Additionally, the review discusses spectral analysis techniques, encompassing baseline removal, chemometric analysis, and machine learning approaches. The wide range of AgNR-based applications of SERS, across various fields, is also explored. Throughout the comprehensive review, key lessons learned from collective findings are outlined and analyzed, particularly in the context of detailed SERS measurements and standardization. The review also provides insights into future challenges and perspectives in the field of SERS. It is our hope that this comprehensive review will serve as a valuable reference for researchers seeking to embark on in-depth studies and applications involving their own SERS substrates.

Positively Charged Silver and Gold Nanoparticles with Controllable Size Distribution for SERS Detection of Negatively Charged Molecules

Surface-enhanced Raman spectroscopy (SERS) has been demonstrated as an ultrasensitive tool for various molecules. However, for the negatively charged molecules, the widely used SERS substrate [negatively charged Ag and Au nanoparticles (Ag or Au NPs (-)] showed either low sensitivity or poor stability. The best solution is to synthesize positively charged silver or gold nanoparticles [Ag or Au NPs (+)] with high stability and excellent SERS performance, which are currently unavailable. To this end, we revitalized the strategy of "charge reversal and seed growth". By selection of ascorbic acid as the reductant and surfactant, the surface charge of Ag or Au NP (-) seeds is adjusted to a balanced state, where the surface charge is negative enough to satisfy the stabilization of the NPs (-) but does not hinder the subsequent charge reversal. By optimization of the chain length and electric charge of polyamine molecules, the highly stable and size-controllable uniform Ag NPs (+) and Au NPs (+) were seed-growth synthesized with high reproducibility. More importantly, the SERS performance of both Ag NPs (+) and Au NPs (+) achieved the trace detection of negatively charged molecules at the level of 1 μg/L, demonstrating an improved SERS sensitivity of up to 3 orders of magnitude compared to the previously reported sensitivity. Promisingly, the introduction of polyamine-capped Ag NPs (+) and Au NPs (+) as SERS substrates with high stability (1 year shelf life) will significantly broaden the application of SERS.

Two-dimensional SPdAZ2 (A = Si, Ge; Z = N, P, As) monolayers with an intrinsic electric field for high-performance photocatalysis

Two-dimensional materials exhibiting exceptional photocatalytic properties and a low carrier recombination rate have garnered significant attention. However, such attributes are relatively scarce among conventional two-dimensional materials. Two-dimensional Janus materials, owing to their intrinsic electric field, hold substantial promise in the realm of photocatalysis. In this study, we conducted a comprehensive investigation of the electronic, optical and photocatalytic properties, as well as the carrier mobility of SPdAZ2 (A = Si, Ge; Z = N, P, As) monolayers employing first-principles calculations. Employing the HSE06 hybrid density functional, we discovered that all six structures exhibit semiconductor characteristics with indirect band gaps under equilibrium conditions. Notably, SPdSiP2, SPdSiAs2, and SPdGeP2 monolayers displayed advantageous band edge positions, facilitating effective photocatalytic water decomposition. Furthermore, we computed the carrier mobility of SPdAZ2 monolayers, revealing significant variations in the electron and hole mobility along the same direction, which enhances the effective separation of electrons and holes. Finally, we explored the impact of biaxial strain and an applied electric field on the electronic properties, photocatalysis, and light absorption of SPdAZ2 monolayers. These compelling features underscore the broad potential applications of SPdAZ2 (A = Si, Ge; Z = N, P, As) monolayers in the realm of photocatalytic water decomposition.

Reconstruction of the Near-Field Electric Field by SNOM Measurement

Scanning near-field optical microscope (SNOM) with nanoscale spatial resolution has been a powerful tool in studying the plasmonic properties of nano materials/structures. However, the quantification of the SNOM measurement remains a major challenge in the field due to the lack of reliable methodologies. We employed the point-dipole model to describe the tip-surface interaction upon laser illumination and theoretically derived the quantitative relationship between the measured results and the actual near-field electric field strength. Thus, we can experimentally reconstruct the near-field electric field through this theoretically calculated relationship. We also developed an experimental technique together with FEM simulation to get the above relationship experimentally and reconstruct the near-field electric field from the measurement by SNOM.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Revisit of the plasmon-mediated chemical transformation of para-aminothiophenol

Fingerprint Raman features of para-aminothiophenol (pATP) in surface-enhanced Raman scattering (SERS) spectra have been widely used to measure plasmon-driven catalytic activities because the appearance of characteristic spectral features is purported to be due to plasmon-induced chemical transformation of pATP to trans-p,p'-dimercaptoazobenzene (trans-DMAB). Here, we present a thorough comparison of SERS spectra for pATP and trans-DMAB in the extended range of frequencies covering group vibrations, skeletal vibrations, and external vibrations under various conditions. Although the fingerprint vibration modes of pATP could be almost mistaken with those of trans-DMAB, the low-frequency vibrations revealed distinct differences between pATP and DMAB. Photo-induced spectral changes of pATP in the fingerprint region were explained well by photo-thermal variation of the Au-S bond configuration, which affects the degree of the metal-to-molecule charge transfer resonance. This finding indicates that a large number of reports in the field of plasmon-mediated photochemistry must be reconsidered.

Enhanced dehalogenation of brominated DBPs by catalyzed electrolysis using Vitamin B12 modified electrodes: Kinetics, mechanisms, and mass balances

Vitamin B₁₂ (VB₁₂) modified electrodes were prepared for the electrocatalytic reductive debromination of tribromoacetic acid (TBAA). Under galvanostatic conditions set as 5 mmol/L VB₁₂ loading, 20 mmol/L Na₂SO₄ as electrolyte, 10.0 mA/cm² current density, pH 3, and 298 K, the degradation efficiency of 200 μg/L TBAA at the VB₁₂ modified electrode could reach 99.9 % after 6 h. The debromination of TBAA followed the first-order kinetic model. The masses of carbon and bromine elements were conserved before and after the reaction, together with the qualitative analysis of the degradation products showed the likely degradation pathways as TBAA→dibromoacetic acid (DBAA)→monobromoacetic acid (MBAA)→acetic acid (AA). ESR detection and quenching experiments confirmed the role of atomic H* in TBAA debromination. In-situ Raman spectroscopy showed that the Co-Br bond was strongly enriched to the electrode surface, accelerating the electron transfer. The H₂O dissociation performance and transition states searching catalyzed by VB₁₂ were calculated by Density Functional Theory (DFT) and proved that the composite electrode can effectively promote atomic H* generation. Material characterization and electrochemical performance tests showed that the VB₁₂ modified electrode had excellent stability and atomic H* catalytic activity. The electrocatalytic debromination of TBAA at VB₁₂ modified electrodes mainly involves two mechanisms, direct reduction by electron transfer and indirect reduction by the strongly reducing atom H*. The results provide an efficient way to achieve safe removal of brominated DBPs from drinking water after chlorination and before human consumption.

Synthesis Methods and Optical Sensing Applications of Plasmonic Metal Nanoparticles Made from Rhodium, Platinum, Gold, or Silver

The purpose of this paper is to provide an in-depth review of plasmonic metal nanoparticles made from rhodium, platinum, gold, or silver. We describe fundamental concepts, synthesis methods, and optical sensing applications of these nanoparticles. Plasmonic metal nanoparticles have received a lot of interest due to various applications, such as optical sensors, single-molecule detection, single-cell detection, pathogen detection, environmental contaminant monitoring, cancer diagnostics, biomedicine, and food and health safety monitoring. They provide a promising platform for highly sensitive detection of various analytes. Due to strongly localized optical fields in the hot-spot region near metal nanoparticles, they have the potential for plasmon-enhanced optical sensing applications, including metal-enhanced fluorescence (MEF), surface-enhanced Raman scattering (SERS), and biomedical imaging. We explain the plasmonic enhancement through electromagnetic theory and confirm it with finite-difference time-domain numerical simulations. Moreover, we examine how the localized surface plasmon resonance effects of gold and silver nanoparticles have been utilized for the detection and biosensing of various analytes. Specifically, we discuss the syntheses and applications of rhodium and platinum nanoparticles for the UV plasmonics such as UV-MEF and UV-SERS. Finally, we provide an overview of chemical, physical, and green methods for synthesizing these nanoparticles. We hope that this paper will promote further interest in the optical sensing applications of plasmonic metal nanoparticles in the UV and visible ranges.

Recent Progress in the Application of Metal Organic Frameworks in Surface-Enhanced Raman Scattering Detection

Metal-organic framework (MOF) compounds are centered on metal ions or metal ion clusters, forming lattices with a highly ordered periodic porous network structure by connecting organic ligands. As MOFs have the advantages of high porosity, large specific surface area, controllable pore size, etc., they are widely used in gas storage, catalysis, adsorption, separation and other fields. SERS substrate based on MOFs can not only improve the sensitivity of SERS analysis but also solve the problem of easy aggregation of substrate nanoparticles. By combining MOFs with SERS, SERS performance is further improved, and tremendous research progress has been made in recent years. In this review, three methods of preparing MOF-based SERS substrates are introduced, and the latest applications of MOF-based SERS substrates in biosensors, the environment, gases and medical treatments are discussed. Finally, the current status and prospects of MOF-based SERS analysis are summarized.

Development of Line-Detected UV-Vis Absorption Microscope and Its Application to Quantitative Evaluation of Lithium Surface Reactivity

Electrochemical reactions in practical batteries occur in confined environments where anode and cathode electrodes are separated only by a thin separator. Therefore, their electrochemical behaviors may differ from those obtained in the conventional experimental cells, where the two electrodes (working and counter electrodes) are largely separated compared to the batteries. The spatial and temporal distributions of the chemical species in the vicinity of each electrode are highly expected to be determined for quantitatively understanding the phenomena in confined environments. In the present study, we developed a line-detected UV-vis absorption microscope that simultaneously measures space-resolved UV-vis absorption spectra. This novel technique has been successfully applied to evaluate the reactivities of the highly reactive lithium (Li) surfaces in organic electrolyte solutions under in situ conditions. The quantitative evaluations of the dissolution rate of Li and the diffusion constant of the product were successfully realized by analyzing the space- and time-resolved absorption spectra based on Fick's law of diffusion. The microscopic technique is expected to open the door to understanding the fundamental electrochemistry in batteries.

Copper II Complexes Based on Benzimidazole Ligands as a Novel Photoredox Catalysis for Free Radical Polymerization Embedded Gold and Silver Nanoparticles

The copper II complex's novel benzimidazole Schiff base ligands were manufactured and gauged as a new photoredox catalyst/photoinitiator amalgamated with triethylamine (TEA) and iodonium salt (Iod) for the polymerization of ethylene glycol diacrylate while exposed to visible light by an LED Lamp at 405 nm with an intensity of 543 mW/cm² at 28 °C. Gold and silver nanoparticles were obtained through the reactivity of the copper II complexes with amine/Iod salt. The size of NPs was around 1-30 nm. Lastly, the high performance of copper II complexes for photopolymerization containing nanoparticles is presented and examined. Ultimately, the photochemical mechanisms were observed using cyclic voltammetry. The preparation of the polymer nanocomposite nanoparticles in situ was photogenerated during the irradiation LED at 405 nm with an intensity of 543 mW/cm² at 28 °C process. UV-Vis, FTIR, and TEM analyses were utilized for the determination of the generation of AuNPs and AgNPs which resided within the polymer matrix.

FDTD Simulations for Rhodium and Platinum Nanoparticles for UV Plasmonics

The article describes the results of finite-difference time-domain (FDTD) mathematical modeling of electromagnetic fields distortion near the surfaces of two transition metals: rhodium (Rh) and platinum (Pt) on glass (SiO₂) substrates. Results were compared with calculated optical properties of classical SERS generating metals (Au and Ag). We have performed FDTD-based theoretical calculations for UV SERS-active nanoparticles (NPs) and structures based on hemispheres of Rh and Pt and planar surfaces, consisting of single NPs with varied gaps between them. The results have been compared with gold stars, silver spheres and hexagons. The prospects of the theoretical approach for single NPs and planar surfaces modeling to evaluate optimal field amplification and light scattering parameters have been shown. The presented approach could be applied as a basis for performing the methods of controlled synthesis for LPSR tunable colloidal and planar metal-based biocompatible optical sensors for UV and deep-UV plasmonics. The difference between UV-plasmonic NPs and plasmonics in a visible range has been evaluated.

A SERS based clinical study on HIV-1 viral load quantification and determination of disease prognosis

In resource limited settings, a cost-effective point-of-care diagnostic testing possessing the characteristics of detecting the minimum viral load of a malady like human immunodeficiency virus (HIV) acquired immune deficiency syndrome (AIDS) is a pressing priority. The present work describes a novel, rapid and field-deployable method using surface enhanced Raman spectroscopy (SERS) for detection and prognosis of HIV positive clinical samples, in seven different viral load ranges varying between 200 and 1 million copies/ml. A relationship between the increasing and decreasing intensity peaks of HIV-1 was also established for quantitation efficacy of the handheld tool. Three different types of SERS substrates: single arm Ag nanorods, double arm Ag nanorods and Au sputtered single arm Ag nanorods were used and the obtained data was compared for the three substrates. It was demonstrated that maximum enhancement was obtained for Au sputtered Ag nanorods. Rigorous coupled wave analysis (RCWA) simulations were performed to study the 'hotspots' in three different SERS substrates. Further, to explore the utility of our platform and to differentiate between the clade specific X4 and R5 tropism, their corresponding SERS spectra were studied using HIV-1 strains belonging to four different HIV-1 subtypes (A, B, C and D) which showed a clear distinction, implying the usefulness of the platform in understanding the disease prognosis. Statistical analysis of the obtained SERS spectra using principal component analysis (PCA) showed good agreement with the experimental results, confirming the ability of SERS platform to quantitate HIV-1 viral load and distinguish HIV-1 strains on the basis of their SERS spectra.

Multifunctional Au@Ag@SiO2 Core-Shell-Shell Nanoparticles for Metal-Enhanced Fluorescence, Surface-Enhanced Raman Scattering, and Photocatalysis Applications

Au@Ag@SiO₂ core-shell-shell nanoparticles (NPs) were prepared by a facile one-pot synthetic technique. The Au@Ag core size and SiO₂ shell thicknesses are readily controlled by adjusting the precursor concentration. The multilayered NPs with dielectric SiO₂ outer shells and bimetallic Au@Ag cores exhibited both the chemical stability of Au with the high scattering efficiency of Ag. Furthermore, the SiO₂ shell is beneficial to the metal-enhanced fluorescence for biomedical applications. Metal-enhanced fluorescence, surface-enhanced Raman scattering, and photocatalytic activities of silica-coated Au@Ag, Ag, Au, and Au/Ag core-shell NPs were compared and discussed. The size and structure of Au@Ag@SiO₂ core-shell-shell NPs were optimized to maximize their optical and catalytic activities.

Charge transfer effect: a new assignment of the abnormal optical absorption band of gold nanoparticles

As a significant accompanying phenomenon of surface-enhanced Raman scattering (SERS), the addition of foreign molecules to colloidal gold or silver nanoparticles results in a new abnormal optical absorption (AOA) band, which usually appears in the long-wavelength region. The assignment of this AOA band has long been debated as an important issue that is desired to be addressed in the SERS field, which is crucial for a clear understanding of the SERS enhancement mechanism and beneficial to surface plasmonics. In this study, both the calculated and measured optical absorptions of gold nanoparticle monomers and dimers as well as their interactions with adsorbed molecules, showed that the AOA band in the long-wavelength region which was assigned to the characteristic longitudinal localized surface plasmon resonance (LSPR) effect of gold nanoparticle chain aggregates in conventional SERS electromagnetic theory, should be attributed to the charge-transfer resonance absorption from gold nanoparticles to adsorbed molecules. This was further confirmed by the corresponding SERS effects. As the excitation wavelength at 785 nm was resonant with the broad AOA band centered at 750 nm, the SERS peaks of the adsorbed pyridine molecules could be dramatically enhanced due to the charge-transfer resonance effect. In contrast, under an excitation wavelength of 532 nm, the SERS peaks appeared very weak, although the excitation wavelength was resonant with the LSPR absorption band of the individual gold nanoparticles.

An experimental guide to in operando electrochemical Raman spectroscopy

Electrochemical Raman spectroscopy can provide valuable insights into electrochemical reaction mechanisms. However, it also shows various pitfalls and challenges. This paper gives an overview of the necessary theoretical background, crucial practical considerations for successful measurement, and guidance for in situ/in operando electrochemical Raman spectroscopy. Several parameters must be optimized for suitable reaction and measurement conditions. From the experimental side, considerations for the setup, suitable signal enhancement methods, choice of material, laser, and objective lens are discussed. Different interface phenomena are reviewed in the context of data interpretation and evaluation.

Graphical Abstract

Strategies and Challenges of Identifying Nanoplastics in Environment by Surface-Enhanced Raman Spectroscopy

Nanoplastics (<1000 nm) have been evidenced to be universal in a variety of environmental media. They pose a potential cytotoxicity and health risk due to their tiny size, which allows them to easily penetrate biological barriers and enter cells. Here, we briefly review the various prevalent analytical techniques or tools for identifying nanoplastics, and further move to focus on their advantages and disadvantages. Surface-enhanced Raman spectroscopy (SERS) has been implemented for the identification of individual nanoparticles because of its high sensitivity to molecules and ease of rapid characterization. Therefore, we introduce the SERS technique in the following aspects, (1) principles of SERS; (2) strategies and advances in SERS detection of nanoplastics; and (3) applying SERS to real environmental samples. We put our effort into the summarization of efficient SERS substrates that essentially enable the better detection of nanoplastics, and extend to discuss how the reported nanoplastics pretreatment methodologies can bring SERS analysis to practical applications. A further step moving forward is to investigate the problems and challenges of currently applied SERS detection methods and to look at future research needs in nanoplastics detection employing SERS analysis.

Quantitatively Revealing the Anomalous Enhancement in Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy Using Single-Nanoparticle Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is an ultrasensitive spectroscopic technique that has been extensively applied in the studies of catalysis, electrochemistry, material science, etc.; however, it is substrate and material limited. The development of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) effectively offsets this limitation that attracts enormous attention due to its potential to be applied to any surface. As the core of the SHINERS technique, the inert shell prevents the exposure of the active metal surface, however, also significantly enlarges the metallic gap where the light is trapped. Consequently, the shell is widely considered a side issue to debilitate the coupling efficiency and hinder the sensitivity of SHINERS without systematic studies. Herein, we investigate the shell and structural effect of SHINERS by performing the quantitative optical and structural characterization of single nanostructures. By a statistic of over two hundred nanostructures, we observe that the field enhancement loss due to the shell could be overcome by optimizing the coupling geometry of the shell-isolated nanoparticles (SHINs). An example of SHIN dimers shows even higher field enhancement than their bare Au nanoparticle counterparts as confirmed and explained by FDTD simulations. We demonstrate the signal enhancement of SHINERS saturates with the increasing number of hot spots but could be further optimized by altering the aggregation geometries of the nanoparticles. The sensitivity improvement of the SHINERS technique will boost its broader applications in material science.

Rapid Fabrication of Fe and Pd Thin Films as SERS-Active Substrates via Dynamic Hydrogen Bubble Template Method

Fe and Pd thin film samples have been fabricated in a rapid fashion utilizing the versatile technique of dynamic hydrogen bubble template (DHBT) method via potentiostatic electrodeposition over a copper substrate. The morphology of the samples is dendritic, with the composition being directly proportional to the deposition time. All the samples have been tested as SERS substrates for the detection of Rhodamine 6G (R6G) dye. The samples perform very well, with the best performance shown by the Pd samples. The lowest detectable R6G concentration was found to be 10^-6 M (479 μgL^-1) by one of the Pd samples with the deposition time of 180 s. The highest enhancement of signals noticed in this sample can be attributed to its morphology, which is more nanostructured compared to other samples, which is extremely conducive to the phenomenon of localized surface plasmon resonance (LSPR). Overall, these samples are cheaper, easy to prepare with a rapid fabrication method, and show appreciable SERS performance.

Controlled fiber core mode and surface mode interaction for enhanced SERS performance

Three-dimensional surface-enhanced Raman scattering (SERS) platform based on microstructure fibers has many advantages for rapid liquid detection due to its microfluidic channels and light guidance. The fiber mode field distribution determines the light-analyte interaction strength but has rarely been studied in SERS applications. In this paper, we numerically and experimentally investigate the mode field distribution in suspended-core fibers decorated with gold nanoparticles. The interaction between the core mode and surface mode is controlled by changing the density of gold nanoparticles on the inner surface. The avoided crossing wavelength shifts linearly to red with the decrease of the nanoparticle spacing. With an optimized nanoparticle spacing of 20 nm, the avoided crossing occurs near the laser wavelength of 633 nm, which greatly increases the power ratio in the liquid channels and hence improves the SERS performance. The detection limit for crystal violet was 10^-9 M, and the enhancement factor was 10⁸. The avoided crossing mechanism can be applied to all fiber SERS probes for sensitivity improvement.

Trends in Application of SERS Substrates beyond Ag and Au, and Their Role in Bioanalysis

This article compares the applications of traditional gold and silver-based SERS substrates and less conventional (Pd/Pt, Cu, Al, Si-based) SERS substrates, focusing on sensing, biosensing, and clinical analysis. In recent decades plethora of new biosensing and clinical SERS applications have fueled the search for more cost-effective, scalable, and stable substrates since traditional gold and silver-based substrates are quite expensive, prone to corrosion, contamination and non-specific binding, particularly by S-containing compounds. Following that, we briefly described our experimental experience with Si and Al-based SERS substrates and systematically analyzed the literature on SERS on substrate materials such as Pd/Pt, Cu, Al, and Si. We tabulated and discussed figures of merit such as enhancement factor (EF) and limit of detection (LOD) from analytical applications of these substrates. The results of the comparison showed that Pd/Pt substrates are not practical due to their high cost; Cu-based substrates are less stable and produce lower signal enhancement. Si and Al-based substrates showed promising results, particularly in combination with gold and silver nanostructures since they could produce comparable EFs and LODs as conventional substrates. In addition, their stability and relatively low cost make them viable alternatives for gold and silver-based substrates. Finally, this review highlighted and compared the clinical performance of non-traditional SERS substrates and traditional gold and silver SERS substrates. We discovered that if we take the average sensitivity, specificity, and accuracy of clinical SERS assays reported in the literature, those parameters, particularly accuracy (93-94%), are similar for SERS bioassays on AgNP@Al, Si-based, Au-based, and Ag-based substrates. We hope that this review will encourage research into SERS biosensing on aluminum, silicon, and some other substrates. These Al and Si based substrates may respond efficiently to the major challenges to the SERS practical application. For instance, they may be not only less expensive, e.g., Al foil, but also in some cases more selective and sometimes more reproducible, when compared to gold-only or silver-only based SERS substrates. Overall, it may result in a greater diversity of applicable SERS substrates, allowing for better optimization and selection of the SERS substrate for a specific sensing/biosensing or clinical application.

Minimally invasive detection of cancer using metabolic changes in tumor-associated natural killer cells with Oncoimmune probes

Natural Killer (NK) cells, a subset of innate immune cells, undergo cancer-specific changes during tumor progression. Therefore, tracking NK cell activity in circulation has potential for cancer diagnosis. Identification of tumor associated NK cells remains a challenge as most of the cancer antigens are unknown. Here, we introduce tumor-associated circulating NK cell profiling (CNKP) as a stand-alone cancer diagnostic modality with a liquid biopsy. Metabolic profiles of NK cell activation as a result of tumor interaction are detected with a SERS functionalized OncoImmune probe platform. We show that the cancer stem cell-associated NK cell is of value in cancer diagnosis. Through machine learning, the features of NK cell activity in patient blood could identify cancer from non-cancer using 5uL of peripheral blood with 100% accuracy and localization of cancer with 93% accuracy. These results show the feasibility of minimally invasive cancer diagnostics using circulating NK cells.

NK cells can be affected by tumour cells and this difference could be utilised as a cancer diagnostic. Here the authors use a nickel based plasmonic spectroscopy system to measure metabolic differences in NK cells that have been exposed to cancer cells as a method of cancer detection.

Review on combining surface-enhanced Raman spectroscopy and electrochemistry for analytical applications

The discovery of surface enhanced Raman scattering (SERS) from an electrochemical (EC)-SERS experiment is known as a historic breakthrough. Five decades have passed and Raman spectroelectrochemistry (SEC) has developed into a common characterization tool that provides information about the electrode-electrolyte interface. Recently, this technique has been successfully explored for analytical purposes. EC was found to highly improve the performances of SERS sensors, providing, among others, controlled adsorption of analytes and increased reproducibility. In this review, we highlight the potential of EC-SERS sensors to be implemented for point-of-need (PON) analyses as miniaturized devices, and their ability to revolutionize fields like quality control, diagnosis or environmental and food safety. Important developments have been achieved in Raman spectroelectrochemistry, which now represents a promising alternative to conventional analytical methods and interests more and more researchers. The studies included in this review open endless possibilities for real-life EC-SERS analytical applications.

Label-Free Detection of the Receptor-Binding Domain of the SARS-CoV-2 Spike Glycoprotein at Physiologically Relevant Concentrations Using Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman scattering (SERS) spectroscopy is a surface- or cavity-enhanced variant of Raman scattering spectroscopy that allows the detection of analytes with a sensitivity down to single molecules. This method involves the use of SERS-active surfaces or cavities capable of concentrating incident radiation into small mode volumes containing the analyte. Here, we have engineered an ultranarrow metal-dielectric nano-cavity out of a film of the receptor-binding domain (RBD) of SARS-CoV-2 spike (S) glycoprotein and a silver surface, held together by interaction between reduced protein sulfhydryl groups and silver. The concentration of light in this nano-cavity allows the label-free recording of the characteristic Raman spectra of protein samples smaller than 1 pg. This is sufficient for the ultrasensitive detection of viral protein antigens at physiologically relevant levels. Moreover, the protein SERS signal can be increased by several orders of magnitude by coating the RBD film with a nanometer-thick silver shell, thereby raising the cavity Q-factor. This ensures a sub-femtogram sensitivity of the viral antigen detection. A simple theoretical model explaining the observed additional enhancement of the SERS signal from the silver-coated protein is proposed. Our study is the first to obtain the characteristic Raman and SERS spectra of the RBD of S glycoprotein, the key SARS-CoV-2 viral antigen, directly, without the use of Raman-reporter molecules. Thus, our approach allows label-free recording of the characteristic spectra of viral antigens at concentrations orders of magnitude lower than those required for detecting the whole virus in biological media. This makes it possible to develop a high-performance optical detection method and conformational analysis of the pathogen and its variants.

MoS2-Based Substrates for Surface-Enhanced Raman Scattering: Fundamentals, Progress and Perspective

Surface-enhanced Raman scattering (SERS), as an important tool for interface research, occupies a place in the field of molecular detection and analysis due to its extremely high detection sensitivity and fingerprint characteristics. Substantial efforts have been put into the improvement of the enhancement factor (EF) by way of modifying SERS substrates. Recently, MoS2 has emerged as one of the most promising substrates for SERS, which is also exploited as a complementary platform on the conventional metal SERS substrates to optimize the properties. In this minireview, the fundamentals of MoS2-related SERS are first explicated. Then, the synthesis, advances and applications of MoS2-based substrates are illustrated with special emphasis on their practical applications in food safety, biomedical sensing and environmental monitoring, together with the corresponding challenges. This review is expected to arouse broad interest in nonplasmonic MoS2-related materials along with their mechanisms, and to promote the development of SERS studies.

Intelligent Detection and Analysis of Polycyclic Aromatic Hydrocarbons Based on Surface-Enhanced Raman Scattering Spectroscopy

Cycloaromatic hydrocarbons are a type of potentially hazardous chemicals that are widely present in the environment and pose a serious threat to human health. However, the traditional research methods for their detection process are cumbersome, the detection cycle is long, and the sensitivity is low. In response to the above problems, this article combines the molecular fingerprint information characteristics of surface-enhanced Raman scattering technology to simulate the four polycyclic aromatic hydrocarbons of pyrene, anthracene, phenanthrene, and trichenium and quantitative detection of cyclic aromatic hydrocarbons and four kinds of polycyclic aromatic hydrocarbon mixtures. The experimental results show that the PAHs based on SERS have the advantages of higher sensitivity and high selectivity, which verifies the accuracy and feasibility of the method in this article.

Highly Ordered Polymer Nanostructures via Solvent On-Film Annealing for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) has been a useful sensing technique, in which inelastic light scattering can be significantly enhanced by absorbing molecules onto rough metal surfaces or nanoparticles. Although many methods have been developed to prepare SERS substrates, it is still highly desirable and challenging to design SERS substrates, especially with highly ordered and controlled three-dimensional (3D) structures. In this work, we develop novel SERS substrates with regular volcano-shaped polymer structures using the versatile solvent on-film annealing method. Polystyrene (PS) nanospheres are first synthesized by surfactant-free emulsion polymerization and assembled on poly(methyl methacrylate) (PMMA) films. After annealing in acetic acid vapors, PMMA chains are selectively swollen and wet the surfaces of the PS nanospheres. By selectively removing the PS nanospheres using cyclohexane, volcano-shaped PMMA films can be obtained. Compared with flat PMMA films with water contact angles of ∼74°, volcano-shaped PMMA films exhibit higher water contact angles of ∼110° due to the sharp features and rough surfaces. The volcano-shaped PMMA films are then coated with gold nanoparticles (AuNPs) as SERS substrates. Using rhodamine 6G as the probe molecules, the SERS results show that the Raman signals of the volcano-shaped PMMA/AuNP hybrid substrates are much higher than those of the pristine PMMA films and PMMA films with AuNPs. For the volcano-shaped PMMA/AuNP hybrid substrates using 400 nm PS nanospheres, a high enhancement factor (EF) value of ∼1.12 × 10⁵ with a detection limit of 10^-8 M is obtained in a short integration time of 1 s. A linear calibration line with an R² value of 0.918 is also established, demonstrating the ability to determine the concentrations of the analytes. This work offers significant insight into developing novel SERS substrates, which is crucial for improving the detection limits of analytes.

Power Spectral Density Analysis for Optimizing SERS Structures

The problem of optimizing the topography of metal structures allowing Surface Enhanced Raman Scattering (SERS) sensing is considered. We developed a model, which randomly distributes hemispheroidal particles over a given area of the glass substrate and estimates SERS capabilities of the obtained structures. We applied Power Spectral Density (PSD) analysis to modeled structures and to atomic force microscope images widely used in SERS metal island films and metal dendrites. The comparison of measured and calculated SERS signals from differing characteristics structures with the results of PSD analysis of these structures has shown that this approach allows simple identification and choosing a structure topography, which is capable of providing the maximal enhancement of Raman signal within a given set of structures of the same type placed on the substrate.

Unveiling the Coupling of Single Metallic Nanoparticles to Whispering-Gallery Microcavities

Whispering-gallery mode resonators host multiple trapped narrow-band circulating optical resonances that find applications in quantum electrodynamics, optomechanics, and sensing. However, the spherical symmetry and low field leakage of dielectric microspheres make it difficult to probe their high-quality optical modes using far-field radiation. Even so, local field enhancement from metallic nanoparticles (MNPs) coupled to the resonators can interface the optical far field and the bounded cavity modes. In this work, we study the interaction between whispering-gallery modes and MNP surface plasmons with nanometric spatial resolution by using electron-beam spectroscopy with a scanning transmission electron microscope. We show that gallery modes are induced over a selective spectral range of the nanoparticle plasmons, and additionally, their polarization can be controlled by the induced dipole moment of the MNP. Our study demonstrates a viable mechanism to effectively excite high-quality-factor whispering-gallery modes and holds potential for applications in optical sensing and light manipulation.

Surface Sensitive Infrared Spectroelectrochemistry using Palladium Electrodeposited on ITO-Modified Internal Reflection Elements

Palladium nanoparticles have been electrodeposited on the surfaces of conductive indium tin oxide (ITO) modified silicon internal reflection elements. The resulting films are shown to be excellent platforms for attenuated...

In situ lattice tuning of quasi-single-crystal surfaces for continuous electrochemical modulation

The ability to control the atomic-level structure of a solid represents a straightforward strategy for fabricating high-performance catalysts and semiconductor materials. Herein we explore the capability of the mechanically controllable surface strain method in adjusting the surface structure of a gold film. Underpotential deposition measurements provide a quantitative and ultrasensitive approach for monitoring the evolution of surface structures. The electrochemical activities of the quasi-single-crystalline gold films are enhanced productively by controlling the surface tension, resulting in a more positive potential for copper deposition. Our method provides an effective way to tune the atom arrangement of solid surfaces with sub-angstrom precision and to achieve a reduction in power consumption, which has vast applications in electrocatalysis, molecular electronics, and materials science.

We reported a new method capable of adjusting the lattice structure of solid surfaces with sub-angstrom precision and achieved in situ and continuous control over electrochemical activity.

A single spectroscopic probe for in situ analysis of electronic and vibrational information at both sides of electrode/electrolyte interfaces using surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) at electrode/electrolyte interfaces includes inelastic light scattering not only by molecular vibrations in the electrolyte phase but also by conduction electrons in the metal electrode phase. While the former, i.e., vibrational SERS (VSERS), is widely used to obtain chemical information on electrode surfaces, the latter, i.e., electronic SERS (ESERS), is still under discussion as a possible origin of the SERS background. Given that electronic Raman scattering is essentially sensitive to the surface charge density of a metal, we conducted a thorough comparison of electrochemical potential dependence of SERS signals in both acidic and alkaline media. Significant intensity changes in the SERS background were observed close to the respective potentials of zero charge in acidic and alkaline media, supporting the contention that the generation of the SERS background can be explained by the ESERS mechanism. Moreover, the ESERS intensities, as the SERS background, were reversibly varied by anion adsorption/desorption at the electrochemical interfaces in conjunction with VSERS features originated from surface-adsorbate vibrations. The sensitivity to the surface charge was much higher in this method than in the conventional combined method of reflectance and SERS. In situ monitoring of both chemical and electronic structures at electrode/electrolyte interfaces using a single spectroscopic probe can avoid various experimental uncertainties caused by combined application of different spectroscopic methods leading to facilitation of our deeper understanding of electrode processes.

Shape and deposition angle control of silver film-over-nanosphere SERS substrates

Thin metallic films on dielectric nanospheres are demonstrated to have a high potential for the fabrication of cost-effective SERS substrates. In addition to the morphological advantages that nanospheres offer for attaining a high density of hot spots, possessing shape adjustability by uncomplicated thermal treatment makes them an attractive platform for tuneable SERS substrates. Furthermore, when combined with the oblique angle metal deposition technique, adjustable gaps at a high density and adjustable shape of metal films, such as Ag films, can be achieved on nanospheres. Applying small changes in deposition angle can provide means for fine adjustment of the Raman enhancement factor (EF), resulting in EF up to 10⁸measured using crystal violet dye molecule as a Raman analyte. This practice paves the way for the fabrication of high EF SERS substrates at a reasonable cost using a monolayer of self-organized nanosphere patterns. An ultra-thin Ag film coated at 5° tilt is shown to be an excellent substitute for a film deposited at 0° with double the thickness. There is a strong agreement between the experimental results and finite-elements-method-based Maxwell simulations exhibiting expected field enhancements up to 10⁹at a tilt angle of 5°.

Proving Nanoscale Chiral Interactions of Cyclodextrins and Propranolol Enantiomers by Means of SERS Measurements Performed on a Solid Plasmonic Substrate

Chiral separation is an important issue for the pharmaceutical industry. Over the years, several separation methods have been developed, mainly based on chromatography. Their working principle is based on the formation of transient diastereoisomers, but the very subtle nanoscale interactions responsible for separation are not always understood. Recently, Raman and surface-enhanced Raman (SERS) spectroscopy have provided promising results in this field. Here we present Raman/SERS experimental data that provide useful information concerning the nanoscale interactions between propranolol enantiomers and α, β, and γ cyclodextrins. Raman spectroscopy was used to prove the formation of host–guest intermolecular complexes having different geometries of interaction. The occurrence of new vibrational bands and a change in the intensities of others are direct proofs of complexes’ formation. These observations were confirmed by DFT calculations. By performing SERS measurements on a new type of plasmonic substrate, we were able to prove the intermolecular interactions responsible for PRNL discrimination. It turned out that the interaction strength between the substrate and the intermolecular complexes is of paramount importance for SERS-based chiral discrimination. This approach could represent a very good starting point for the evaluation of molecular interactions manifesting between other pharmaceutical compounds and different classes of chiral selectors.

Development of Highly Sensitive Raman Spectroscopy for Subnano and Single-Atom Detection

Direct detection and characterisation of small materials are fundamental challenges in analytical chemistry. A particle composed of dozens of metallic atoms, a so-called subnano-particle (SNP), and a single-atom catalyst (SAC) are ultimate analysis targets in terms of size, and the topic is now attracting increasing attention as innovative frontier materials in catalysis science. However, characterisation techniques for the SNP and SAC adsorbed on substrates requires sophisticated and large-scale analytical facilities. Here we demonstrate the development of an ultrasensitive, laboratory-scale, vibrational spectroscopic technique to characterise SNPs and SACs. The fine design of nano-spatial local enhancement fields generated by the introduction of anisotropic stellate-shaped signal amplifiers expands the accessibility of small targets on substrates into evanescent electromagnetic fields, achieving not only the detection of isolated small targets but also revealing the effects of intermolecular/interatomic interactions within the subnano configuration under actual experimental conditions. Such a development of “in situ subnano spectroscopy” will facilitate a comprehensive understanding of subnano and SAC science.