Ti-Peroxo Species in the TS-1/H2O2/H2O System

Catalytic Decomposition of H2O2 in the Aqueous Dispersions of the Potassium Polytitanates Produced in Different Conditions of Molten Salt Synthesis

It is shown that the potassium polytitanate powder (PPT) synthesized at 500 °C via the treatment of powdered TiO₂ (rutile) in molten mixtures of KOH and KNO₃ is a cheap and effective catalyst of H₂O₂ chemical decomposition in aqueous solutions. At the same time, the PPT catalytic activity strongly depends on the [TiO₂]:[KOH]:[KNO₃] weight ratio in the mixture used for the synthesis, increasing with [KNO₃] in the order of PPT (30:30:40) < PPT (30:50:20) < PPT (30:70:0). The obtained results are explained by increased [Ti³⁺] in the PPT structure (XPS data), which is grown in this order from 0 to 4.0 and 21.9 at.%, respectively, due to the reduced oxidation activity of the melt used for PPT synthesis. The mechanism of the autocatalytic process taking place in the PPT-H₂O₂-H₂O system is analyzed. Taking into account the data of FT-IR spectroscopy, it is assumed that the increased catalytic activity of the investigated materials is related to the increased surface concentration of the Ti⁴⁺-O(H)-Ti⁴⁺ groups, formed from the Ti³⁺-O(H₃O⁺)-Ti⁴⁺ clusters and further transformed into Ti-O-O-H catalytic centers. Some possible applications of the PPT-H₂O₂-H₂O catalytic system, including the oxidation processes of green chemistry and photo-catalysis, are discussed.

Selective Styrene Oxidation Catalyzed by Phosphate Modified Mesoporous Titanium Silicate

Selective oxidation of organics over an efficient heterogeneous catalyst under mild liquid phase conditions is a very demanding chemical reaction. Herein, we first report the modification of the surface of mesoporous silica MCM-41 material by phosphate for the efficient incorporation of Ti(IV) in the silica framework to obtain highly ordered 2D hexagonal mesoporous material STP-1. STP-1 has been synthesized by using tetraethyl orthosilicate, triethyl phosphate, and titanium isopropoxide as Si, P, and Ti precursors, respectively, in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) under hydrothermal conditions. The observed specific surface area and pore volume of STP-1 were 878 m2g−1 and 0.75 ccg−1, respectively. Mesoporous STP-1 has been thoroughly characterized by XRD, FT-IR, Raman spectroscopy, SEM, and TEM analyses. Titanium incorporation (Ti/Si = 0.006) was confirmed from the EDX analysis. This mesoporous STP-1 was used as a heterogeneous catalyst for the selective oxidation of styrene into benzaldehye in the presence of dilute aqueous H2O2 as an oxidizing agent. Various reaction parameters such as the reaction time, the reaction temperature, and the styrene/H2O2 molar ratio were systematically studied in this article. Under optimized reaction conditions, the selectivity of benzaldehyde could reach up to 93.8% from styrene over STP-1. Further, the importance of both titanium and phosphate in the synthesis of STP-1 for selective styrene oxidation was examined by comparing the catalytic result with only a phosphate-modified mesoporous silica material, and it suggests that both titanium and phosphate synergistically play an important role in the high selectivity of benzaldehyde in the liquid phase oxidation of styrene.

Photocatalytic oxidation of Mn(II) on the surface of Bi2.15WO6via the ligand-to-metal charge transfer (LMCT) pathway

Biotic and abiotic oxidation of Mn(II) in aqueous environments is an important process for the cycling of many elements. However, the mechanism involved in photocatalytic oxidation of Mn(II) has not been clearly elucidated yet. In this study, the photocatalytic oxidation of Mn(II) on the surface of self-doped Bi_2+xWO₆ (Bi_2.15WO₆) under visible light was conducted. Kinetics results show that visible light apparently accelerates the oxidation of Mn(II) to Mn(III, IV) oxides on Bi_2.15WO₆. The average oxidation states (AOS) of manganese reach 2.18 after 80 min of reaction under visible light at pH 8.50. Characterizations indicate the formation of Bi(III)-O-Mn(II) surface complexes between Mn(II) and surface Bi(III) on Bi_2.15WO₆, which then decreases the bandgap of [Bi_2.15WO₆ + Mn(II)]_light (2.53 eV) compared with those of [Bi_2.15WO₆ + Mn(II)]_dark (2.72 eV) and pure Bi_2.15WO₆ (2.86 eV), suggesting the contribution of the ligand-to-metal charge transfer (LMCT) pathway to the photocatalytic oxidation of Mn(II). Moreover, the addition of inorganic oxidants with strong oxidizing capacities (such as Cr₂O₇^2-, NO₃^- or NO₂^-) significantly increases the oxidation rate of Mn(II), further verifying the contribution of the LMCT pathway to Mn(II) oxidation. We therefore suggest that the LMCT pathway is one of the important oxidation routes for Mn(II) oxidation on Bi_2.15WO₆ under visible light.

Rationalization of TS-1 Synthesis through the Design of Experiments

Titanium Silicalite-1 (TS-1) is a zeolite used as catalyst in partial oxidation reactions, whose synthesis is often performed under hydrothermal conditions by exploiting alkoxides as Ti and Si precursors. A...

Defect Formation, T-Atom Substitution and Adsorption of Guest Molecules in MSE-Type Zeolite Framework-DFT Modeling

We used computational modeling, based on Density Functional Theory, to help understand the preference for the formation of silanol nests and the substitution of Si by Ti or Al in different crystallographic positions of the MSE-type framework. All these processes were found to be energetically favorable by more than 100 kJ/mol. We suggested an approach for experimental identification of the T atom position in Ti-MCM-68 zeolite via simulation of infrared spectra of pyridine and acetonitrile adsorption at Ti. The modeling of adsorption of hydrogen peroxide at Ti center in the framework has shown that the molecular adsorption was preferred over the dissociative adsorption by 20 to 40 kJ/mol in the presence or absence of neighboring T-atom vacancy, respectively.

Mild Oxidation of Organosulfur Compounds with H2O2 over Metal-Containing Microporous and Mesoporous Catalysts

Mild catalytic oxidation of thioethers and thiophenes is an important reaction for the synthesis of molecules with pharmaceutical interest, as well as for the development of efficient processes able to remove sulfur-containing pollutants from fuels and wastewater. With respect to the green chemistry principles, hydrogen peroxide (H2O2) is the ideal oxidant and the Me-containing porous materials (Me = Ti, V, Mo, W, Zr) are among the best heterogeneous catalysts for these applications. The main classes of catalysts, including Me-microporous and mesoporous silicates, Me-layered double hydroxides, Me-metal–organic frameworks, are described in this review. The catalytic active species generated in the presence of H2O2, as well as the probable oxidation mechanisms, are also addressed. The reactivity of molecules in the sulfoxidation process and the role played by the solvents are explored.

Visible light-induced Minisci reaction through photoexcitation of surface Ti-peroxo species

Visible-light induced Minisci-type functionalization of pyridine with tetrahydrofuran proceeds through photoexcitation of surface Ti-peroxo species on TiO₂.

Effect of ultra-low amount of gold in oxide-supported bimetallic Au–Fe and Au–Cu catalysts on liquid-phase aerobic glycerol oxidation in water

Low-loaded Au–Fe and Au–Cu supported bimetallic catalysts showed exceptional activity in liquid-phase glycerol oxidation. Strong synergetic effect of Au–Fe (Cu) interaction and Au content tuned the oxidation activity and selectivity of the catalysts.

Activation of Hydrogen Peroxide by a Titanium Oxide-Supported Iron Catalyst: Evidence for Surface Fe(IV) and Its Selectivity

Iron immobilized on supports such as silica, alumina, titanium oxide, and zeolite can activate hydrogen peroxide (H₂O₂) into strong oxidants. However, the role of the support and the nature of the oxidants produced in this process remain elusive. This study investigated the activation of H₂O₂ by a TiO₂-supported catalyst (FeTi-ox). Characterizing the catalyst surface in situ using X-ray absorption spectroscopy (XAS), together with X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR), revealed that the interaction between H₂O₂ and the TiO₂ phase played a key role in the H₂O₂ activation. This interaction generated a stable peroxo-titania ≡Fe(III)-Ti-OOH complex, which reacted further with H₂O to produce a surface oxidant, likely ≡Fe[IV] ═ O²⁺. The oxidant effectively degraded acetaminophen, even in the presence of chloride, bicarbonate, and organic matter. Unexpectedly, contaminant oxidation continued after the H₂O₂ in the solution was depleted, owing to the decomposition of ≡Fe(III)-Ti-OOH by water. In addition, the FeTi-ox catalyst effectively degraded acetaminophen over five testing cycles. Overall, new insights gained in this study may provide a basis for designing more effective catalysts for H₂O₂ activation.

Formation of hydroperoxo (-OOH) species on the surface of self-doped Bi2.15WO6: reactivity towards As(iii) oxidation

Bi2+xWO6 is a cost-effective and environmentally friendly photocatalyst that shows high reactivity in the oxidation of various contaminants under visible light. However, under alkaline conditions, the reactive oxidative species in the Bi2+xWO6 system are still not clear yet. In this study, it is observed that the oxidation rates of As(iii) increase with increasing pH values in the Bi2.15WO6 system. Photoluminescence and the Mott-Schottky analyses confirm that OH- promotes the separation and transfer of photogenerated electron-hole pairs over Bi2.15WO6, thus facilitating the oxidation of As(iii). Electron spin resonance spectra analysis and quenching experiments rule out contributions of •OH, O2˙-, 1O2 and superoxo species to As(iii) oxidation and indicate that surface -OOH and/or H2O2 are indeed the predominant species under alkaline conditions. The improved production of H2O2 by H-donors such as glucose and phenol, as well as the UV-vis diffuse reflectance and Raman analyses, further confirms the formation of surface -OOH on Bi2.15WO6 under alkaline conditions. In the dark, the significant higher oxidation rate of As(iii) by H2O2-Bi2.15WO6 than that by H2O2 alone reveals that surface -OOH, instead of H2O2, plays an important role in As(iii) oxidation. This study enriches our understanding of the diversity of reactive oxygen species (ROS) in the Bi2.15WO6 system and gives new insight into the mechanism involved in the oxidation of As(iii) under alkaline conditions.

DFT Study on Mechanisms of the N2O Direct Catalytic Decomposition over Cu-ZSM-5: The Detailed Investigation on NO Formation Mechanism

Nitrous oxide (N2O) is an industrial emission that causes the greenhouse effect and damages the ozone layer. Density functional theory study on the N2O direct catalytic decomposition over Cu–ZSM-5 has been performed in this paper. Two possible reaction mechanisms for N2O direct catalytic decomposition over Cu-ZSM-5 were proposed (O2 formation mechanism and Nitric oxide (NO) formation mechanism). The geometrical parameters, vibration frequency and thermodynamic data of the intermediate states in each step have been examined. The results indicate that N2O can be adsorbed on active site Cu in two ways (O-terminal or N-terminal), and N2O decomposition reactions can occur in both cases. The NO formation mechanism exhibits higher N2O dissociation reaction due to lower energy barrier.

Direct evidence of the key role of UV-formed peroxide species in photocatalytic gas-solid oxidation in air on anatase TiO2 particles

IR spectroscopy was applied for the in situ investigations of surface intermediates formed on the surface of TiO2 (anatase) and ZnO under UV light illumination in air and their reactivity in the elimination of simple pollutant molecules. UV-irradiation of TiO2 (anatase) in air leads to the generation of peroxo-species with the peaks at 852 and 912 cm-1, but the bands of O2˙-ads were not detected. This is, to our knowledge, the first direct in situ IR spectroscopic detection of O2 photosorption intermediates in moist air. The formation of peroxo-species in these conditions is specific for TiO2 (anatase), whereas on ZnO the predominant species under UV light illumination in air are O2˙-ads and H2O2, desorbing into gas phase. Adsorbed water and surface hydroxyl groups contribute to the formation and stabilization of peroxo-species on TiO2 anatase during UV illumination in an oxygen atmosphere. If UV-irradiation is carried out in the environment of moist argon instead of moist air, the peroxo-species on TiO2 anatase are formed from water in a negligible quantity. Peroxo-species formed after O2 photoadsorption on TiO2 anatase in moist air have band positions similar to peroxo-species formed after photodecomposition of H2O2 (with accompanying color change of this sample from yellow to white). Direct experimental IR-spectroscopic evidence of peroxo-species reactivity as oxidative intermediates on TiO2 (anatase) in CO and ethanol vapor photooxidative processes is firstly obtained. These results confirm our early conclusion that peroxo-species formed under UV-irradiation in O2 on the hydrated surface of TiO2 (anatase) can be responsible for the surprising extreme dependence of the CO photooxidation rate on the adsorbed water coverage with the maximum at ∼0.5 ML. The ZnO sample was not active in the photooxidation of these molecules in air. It is concluded that UV formed peroxo-species are important diamagnetic oxidative intermediates in heterogeneous photochemical gas-solid oxidation processes on TiO2 (anatase).

Highly selective 1-pentene epoxidation over Ti-MWW with modified microenvironment of Ti active sites

The hexa-coordinated Ti active sites with the piperidine molecules as ligand significantly accelerate H₂O₂ activation, which effectively improve the catalytic performance of Ti-MWW in the 1-pentene epoxidation reaction.

Single Chromium Atoms Supported on Titanium Dioxide Nanoparticles for Synergic Catalytic Methane Conversion under Mild Conditions

Direct conversion of methane to value-added chemicals with high selectivity under mild conditions remains a great challenge in catalysis. Now, single chromium atoms supported on titanium dioxide nanoparticles are reported as an efficient heterogeneous catalyst for direct methane oxidation to C1 oxygenated products with H₂ O₂ as oxidant under mild conditions. The highest yield for C1 oxygenated products can be reached as 57.9 mol mol_Cr ^-1 with selectivity of around 93 % at 50 °C for 20 h, which is significantly higher than those of most reported catalysts. The superior catalytic performance can be attributed to the synergistic effect between single Cr atoms and TiO₂ support. Combining catalytic kinetics, electron paramagnetic resonance, and control experiment results, the methane conversion mechanism was proposed as a methyl radical pathway to form CH₃ OH and CH₃ OOH first, and then the generated CH₃ OH is further oxidized to HOCH₂ OOH and HCOOH.

Polymer immobilized tantalum(v)–amino acid complexes as selective and recyclable heterogeneous catalysts for oxidation of olefins and sulfides with aqueous H2O2

Polymer supported peroxotantalate based heterogeneous catalysts served as highly efficient, selective and recyclable catalysts for alkene epoxidation and sulfide oxidation with green oxidant aqueous H₂O₂ under mild reaction conditions.

Wheel-Like Icosanuclear Peroxotitanate-A Stable Water-Soluble Catalyst for Oxygen Transfer Reactions

Water-soluble wheel-like icosanuclear peroxotitanate K₁₆[Ti₂₀(μ-O)₈(HO₂)₈(O₂)₁₂( R, R-tart)₁₂]·52H₂O (1) chelated by tartrate has been successfully isolated. As the largest peroxotitanate reported, {Ti₂₀} features 20 (hydro)peroxo groups with three kinds of coordination modes in μ-η¹:η², μ-η²:η², and η² fashions. The cluster is stable in solution and solid states. It has been tested for the catalytic oxidations of methyl phenyl sulfide and pyridine with hydrogen peroxide, respectively, which shows reversible elimination and the addition of peroxo groups. This provides a rare example of well-characterized titanium peroxide for homogeneous catalysis and mechanism research.

Rapid Ferric Transformation by Reductive Dissolution of Schwertmannite for Highly Efficient Catalytic Degradation of Rhodamine B

In this study, reductive dissolution of iron oxides was considered for the acceleration of the transformation from Fe(III) to Fe(II) to improve the degradation of rhodamine B (RhB) by potassium persulfate (PS) activation on schwertmannite. The addition of hydroxylamine (HA) showed an enhancement effect on the degradation at pH 3 and 5, but insignificant efficiency of the addition was obtained at pH 9. The surface reduction from Fe(III)-OH to Fe(II)-OH by HA was considered dominant for the acceleration of PS activation through the reductive dissolution process, and the hydroxyl and sulfate radicals generated by the decomposition of surface complexes were main primary reactive oxidants that contributed to the degradation of RhB.

Highly selective synthesis of campholenic aldehyde over Ti-MWW catalysts by α-pinene oxide isomerization

Campholenic aldehyde is a highly valuable fine chemical that can be obtained by multistep synthesis from monoterpene α-pinene isolated from turpentine oil.

Insight into the stereoselectivity of TS-1 in epoxidation ofcis/trans-2-hexene: a computational study

The mechanism of the stereoselectivity forcis/trans-2-hexene epoxidation in TS-1 zeolite was studied using density functional theory and the ONIOM scheme.