Modeling of the Optical Properties of Cofacial Chromophore Pairs: Stilbenophane

An Energy-Tunable Dual Emission Mechanism of the Hybridized Local and Charge Transfer (HLCT) and the Excited State Conjugation Enhancement (ESCE)

Molecular design of dual-fluorescent probes requires precise adjustment of the energy levels of two excited states and the energy barrier between them. While the hybridized local and charge-transfer (HLCT) state has been recently focused as an important excited state for high emission efficiency with a tunable energy level, a dual emission involving the HLCT state has been only achieved with the excited-state intramolecular proton transfer (ESIPT) system. Here, a series of dual-fluorescent molecules involving an HLCT excited state with the excited-state conjugation enhancement (ESCE) motif is presented as the first case. The energy level of the HLCT state has been adjusted by changing substituents and solvents, separately from the ESCE energy level. The HLCT-ESCE molecular design with tunable fluorescence properties proposes a new strategy for the development of advanced fluorescent probes.

Paper and Pencil Design of Color-Pure Organic Emitters: The Curious Case of Xanthene Dyes

The quest for color-pure emitters for multicolor bioimaging as well as for ultrahigh definition organic light-emitting diodes demands facile design concepts to avoid tedious synthetic or computational trial-and-error procedures. We have recently presented a simple recipe to construct color-pure blue emitters, which combines basic resonance structure and frontier molecular orbital treatments; this recipe applies to multiresonant type emitters and allows to enlarge the chemical space toward novel structural motifs. In the current work, we show that such fundamental considerations further apply to the structurally entirely different family of xanthene dyes. Opposite to the related polymethine dye family with small bond length alternation (BLA) in the ground and in the excited state (S0, S1), however, xanthene dyes display large BLA in S0 and in S1, so that the overall change in BLA, ΔBL, is small. This gives equally rise to color-pure emission; the underlying reasons for this curious behavior are carved out in the current study. This generalization of the recipe in fact constitutes the desired "paper and pencil" design strategy, spanning now the whole visible range.

Rational Design of Color-Pure Blue Organic Emitters by Poly-Heteroaromatic Omni-Delocalization

Current research on organic light emitters which utilize multiple resonance-induced thermally activated delayed fluorescence (MR-TADF) materials is gaining significant interest because of the materials' ability to efficiently generate color-pure blue emission. However, the underlying reasons for high color purity remain unclear. It is shown here that these emitters share a common electronic basis, which is deduced from resonance structure considerations following Clar's rule, and which is termed as "poly-heteroaromatic omni-delocalization" (PHOD). The simple and clear design rules derived from the PHOD concept allow extending the known chemical space by new structural motifs. Based on PHOD, a set of novel high-efficiency color-pure emitters with brilliant deep-blue hue is specifically designed.

Spectroscopic analysis of vibrational coupling in multi-molecular excited states

Multi-molecular excited states accompanied by intra- and inter-molecular geometric relaxation are commonly encountered in optical and electrooptical studies and applications of organic semiconductors as, for example, excimers or charge transfer states. Understanding the dynamics of these states is crucial to improve organic devices such as light emitting diodes and solar cells. Their full microscopic description, however, demands sophisticated tools such as ab initio quantum chemical calculations which come at the expense of high computational costs and are prone to errors by assumptions as well as iterative algorithmic procedures. Hence, the analysis of spectroscopic data is often conducted at a phenomenological level only. Here, we present a toolkit to analyze temperature dependent luminescence data and gain first insights into the relevant microscopic parameters of the molecular system at hand. By means of a Franck-Condon based approach considering a single effective inter-molecular vibrational mode and different potentials for the ground and excited state we are able to explain the luminescence spectra of such multi-molecular states. We demonstrate that by applying certain reasonable simplifications the luminescence of charge transfer states as well as excimers can be satisfactorily reproduced for temperatures ranging from cryogenics to above room temperature. We present a semi-classical and a quantum-mechanical description of our model and, for both cases, demonstrate its applicability by analyzing the temperature dependent luminescence of the amorphous donor-acceptor heterojunction tetraphenyldibenzoperiflanthene:C₆₀ as well as polycrystalline zinc-phthalocyanine to reproduce the luminescence spectra and extract relevant system parameters such as the excimer binding energy.

Emissive and reactive excimers in a covalently-linked supramolecular multi-chromophoric system with a balanced rigid-flexible structure

A novel multi-chromophoric system, triad, in which two styrylbenzoquinoline (SBQ) photochromes are connected by a balanced rigid-flexible linker comprising 2,3-naphthylene framework (a residue of 3-oxy-2-naphthoic acid) and tetramethylene groups, was designed and synthesized to study an excimer formation in the excited state. The ¹H NMR data testified that triad exists in solution as folded conformers with asymmetric parallel-displaced SBQ units. Under light irradiation, in the triad, competitive photoisomerization and [2 + 2] photocycloaddition reactions were observed, both reactions being reversible. The photocycloaddition resulted in a tetrasubstituted cyclobutane. The red-shifted fluorescence spectrum and the appearance of a long-lived component in the triad fluorescence decay indicated formation of an 'emissive' excimer. The photocycloaddition is assumed to occur in a 'reactive' excimer, in which the ethylene groups of the SBQ photochromes are located at a distance sufficient for the formation of the σ-bonds between them. Quantum-chemical density functional theory (DFT) calculations at M06-2X/6-31G* level predicted the existence of the triad conformers with π-stacking interaction of SBQ photochromes, the structure of which is pre-organized for the excimer formation and photocycloaddition. For the first time, both emissive and reactive excimers were experimentally observed in the multi-chromophoric system with two diarylethylene photochromes undergoing [2 + 2] photocycloaddition.

Fluorescent Liquid Tetrazines

Tetrazines with branched alkoxy substituents are liquids at ambient temperature that despite the high chromophore density retain the bright orange fluorescence that is characteristic of this exceptional fluorophore. Here, we study the photophysical properties of a series of alkoxy-tetrazines in solution and as neat liquids. We also correlate the size of the alkoxy substituents with the viscosity of the liquids. We show using time-resolved spectroscopy that intersystem crossing is an important decay pathway competing with fluorescence, and that its rate is higher for 3,6-dialkoxy derivatives than for 3-chloro-6-alkoxytetrazines, explaining the higher fluorescence quantum yields for the latter. Quantum chemical calculations suggest that the difference in rate is due to the activation energy required to distort the tetrazine core such that the nπ*S1 and the higher-lying ππ*T2 states cross, at which point the spin-orbit coupling exceeding 10 cm-1 allows for efficient intersystem crossing to occur. Femtosecond time-resolved anisotropy studies in solution allow us to measure a positive relationship between the alkoxy chain lengths and their rotational correlation times, and studies in the neat liquids show a fast decay of the anisotropy consistent with fast exciton migration in the neat liquid films.

Zero-Dimensional Hybrid Organic-Inorganic Indium Bromide with Blue Emission

Low-dimensional hybrid organic-inorganic metal halides have received increased attention because of their outstanding optical and electronic properties. However, the most studied hybrid compounds contain lead and have long-term stability issues, which must be addressed for their use in practical applications. Here, we report a new zero-dimensional hybrid organic-inorganic halide, RInBr₄, featuring photoemissive trimethyl(4-stilbenyl)methylammonium (R⁺) cations and nonemissive InBr₄^- tetrahedral anions. The crystal structure of RInBr₄ is composed of alternating layers of inorganic anions and organic cations along the crystallographic a axis. The resultant hybrid demonstrates bright-blue emission with Commission Internationale de l'Eclairage color coordinates of (0.19, 0.20) and a high photoluminescence quantum yield (PLQY) of 16.36% at room temperature, a 2-fold increase compared to the PLQY of 8.15% measured for the precursor organic salt RBr. On the basis of our optical spectroscopy and computational work, the organic component is responsible for the observed blue emission of the hybrid material. In addition to the enhanced light emission efficiency, the novel hybrid indium bromide demonstrates significantly improved environmental stability. These findings may pave the way for the consideration of hybrid organic In(III) halides for light emission applications.

Dual Emission: Classes, Mechanisms, and Conditions

There has been much interest in dual-emission materials in the past few years for materials and life science applications; however, a systematic overview of the underlying processes is so-far missing. We resolve this issue herein by classifying dual-emission (DE) phenomena as relying on one emitter with two emitting states (DE1), two independent emitters (DE2), or two correlated emitters (DE3). Relevant DE mechanisms for materials science are then briefly described together with the electronic and/or geometrical conditions under which they occur. For further reading, references are given that offer detailed insight into the complex mechanistic aspects of the various DE processes or provide overviews on materials families or their applications. By avoiding ambiguities and misinterpretations, this systematic, insightful Review might inspire future targeted designs of DE materials.

"Though It Be but Little, It Is Fierce": Excited State Engineering of Conjugated Organic Materials by Fluorination

Fluorination is frequently used to significantly change the properties of conjugated organic materials due to fluorine's exceptional properties; well-known is its impact on electronic structure, but it also impacts the geometry despite fluorine's small size. Less known, the changes in the electronic and geometrical properties may provoke drastic changes of the excited state properties like batho- and hypsochromic shifts of absorption and emission bands (inter alia leading to excited state switching), hypo- and hyperchromic effects, spectral broadening, and changes of the nonradiative deactivation pathways. The state of the art on these issues is summarized in the current Perspective to stimulate further discussions on this intriguing subject.

Mesoporous stilbene-based lanthanide metal organic frameworks: synthesis, photoluminescence and radioluminescence characteristics

Mesoporous non-interpenetrating stilbene-based lanthanide metal organic frameworks exhibits photo and radioluminescence behavior.

Modifying the Size of Ultrasound-Induced Liquid-Phase Exfoliated Graphene: From Nanosheets to Nanodots

Ultrasound-induced liquid-phase exfoliation (UILPE) is an established method to produce single- (SLG) and few-layer (FLG) graphene nanosheets starting from graphite as a precursor. In this paper we investigate the effect of the ultrasonication power in the UILPE process carried out in either N-methyl-2-pyrrolidone (NMP) or ortho-dichlorobenzene (o-DCB). Our experimental results reveal that while the SLGs/FLGs concentration of the NMP dispersions is independent of the power of the ultrasonic bath during the UILPE process, in o-DCB it decreases as the ultrasonication power increases. Moreover, the ultrasonication power has a strong influence on the lateral size of the exfoliated SLGs/FLGs nanosheets in o-DCB. In particular, when UILPE is carried out at ∼600 W, we obtain dispersions composed of graphene nanosheets with a lateral size of 180 nm, whereas at higher power (∼1000 W) we produce graphene nanodots (GNDs) with an average diameter of ∼17 nm. The latter nanostructures exhibit a strong and almost excitation-independent photoluminescence emission in the UV/deep-blue region of the electromagnetic spectrum arising from the GNDs' intrinsic states and a less intense (and strongly excitation wavelength dependent) emission in the green/red region attributed to defect states. Notably, we also observe visible emission with near-infrared excitation at 850 and 900 nm, a fingerprint of the presence of up-conversion processes. Overall, our results highlight the crucial importance of the solvent choice for the UILPE process, which under controlled experimental conditions allows the fine-tuning of the morphological properties, such as lateral size and thickness, of the graphene nanosheets toward the realization of luminescent GNDs.

Color-Tunable Cyano-Substituted Divinylene Arene Luminogens as Fluorescent π-Gelators

The synthesis of three cyano-substituted divinylene π-gelators is reported. The modulation of the color is achieved by placing the cyano groups in appropriate position of the conjugated backbone, thus modulating the donor-acceptor interaction. Variable-temperature UV-vis data have been utilized to investigate the self-assembly of the gelators 1-3 that is governed by a cooperative mechanism. A complete set of photophysical parameters (ΦF,τ, kr and knr) demonstrate the role of the molecular aggregation in enhanced emission upon self-assembly.

Tuning of the electronic and photophysical properties of ladder-type quaterphenyl by selective methylene-bridge fluorination

The photophysics of fluorinated ladder-type quaterphenyls depend strongly on number and position of fluorine, driven by hyperconjugation and symmetry breaking effects.

Excited State Features and Dynamics in a Distyrylbenzene-Based Mixed Stack Donor-Acceptor Cocrystal with Luminescent Charge Transfer Characteristics

Combined structural, photophysical, and quantum-chemical studies at the quantum mechanics/molecular mechanics (QM/MM) level precisely reveal the structure-property relationships in a mixed-stack donor-acceptor cocrystal, which displays vibronically structured fluorescence, strongly red-shifted against the spectra of the parent donor and acceptor, with high quantum yield despite the pronounced CT character of the emitting state. The study elucidates the reasons for this unusual combination, quantifies the ordering and nature of the collective excited singlet and triplet state manifold, and details the deactivation pathways of the initially created Franck-Condon state.

Elucidating the impact of molecular packing and device architecture on the performance of nanostructured perylene diimide solar cells

The performance of organic photovoltaic devices (OPV) with nanostructured polymer:perylene diimide (PDI) photoactive layers approaches the levels of the corresponding polymer:fullerene systems. Nevertheless, a coherent understanding of the difficulty for PDI-based OPV devices to deliver high power conversion efficiencies remains elusive. Here we perform a comparative study of a set of four different polymer:PDI OPV model systems. The different device performances observed are attributed to differences in the nanostructural motif of these composites, as determined by wide-angle X-ray scattering (WAXS) measurements. Long-range structural order in the PDI domain dictates (i) the stabilization energy and (ii) the concentration of the PDI excimers in the composites. The quenching of the PDI excimer photoluminescence (PL) is found to be insensitive to the former, but it depends on the latter. High PL quenching occurs for the low concentration of PDI excimers that are formed in PDI columns with a length comparable to the PDI excimer diffusion length. The stabilization of the PDI excimer state increases as the long-range order in the PDI domains improves. The structural order of the PDI domains primarily affects charge transport. Electron mobility reduces as the size of the PDI domain increases, suggesting that well-ordered PDI domains suffer from poor electronic connectivity. WAXS further reveals the presence of additional intermolecular PDI interactions, other than the direct face-to-face intermolecular coupling, that introduce a substantial energetic disorder in the polymer:PDI composites. Conventional device architectures with hole-collecting ITO/PEDOT:PSS bottom electrodes are compared with inverted device architectures bearing bottom electron-collecting electrodes of ITO/ZnO. In all cases the ZnO-functionalized devices surpass the performance of the conventional device analogues. X-ray photoelectron spectroscopy explains that in

PEDOT

PSS-functionalized devices, the PDI component preferentially segregates closer to the hydrophilic

PEDOT

PSS electrode, thus impeding the efficient charge extraction and limiting device photocurrent.

Organic polymorphs: one-compound-based crystals with molecular-conformation- and packing-dependent luminescent properties

The present study of structure-property relationships and disclosure of fascinating amplified spontaneous emission (ASE) behavior of an organic molecule not only exhibits the individual effect of molecular conformation and arrangement on the emission properties of the crystal separately, but also indicates that some concealed elegant properties of organic solids can be achieved through manipulating the polymorphic form.

Homo- and heterometallic luminescent 2-D stilbene metal-organic frameworks

Metal-organic frameworks (MOFs) can provide a matrix for the assembly of organic chromophores into well-defined geometries, allowing for tuning of the material properties and study of structure-property relationships. Here, we report on the effect of the coordinated metal ion on the luminescence properties of eight isostructural MOFs having the formula M(1)2M(2)L3(DMF)2 (M(1) = M(2) = Zn (1), Cd (2), Mn (3), Co (4); M(1) = Zn, M(2) = Cd (5), Mn (6), Co (7); M(1) = Co, M(2) = Mn (8); L = trans-4,4'-stilbene dicarboxylate), synthesized by reaction of the appropriate metal nitrate or mixtures of metal nitrates with LH2 in DMF. The crystal structures of 2, 3 and 5-8 were determined by X-ray diffraction to be composed of trinuclear metal clusters linked by stilbene dicarboxylate linkers in a paddlewheel geometry, extending to form a 2-D layered structure. In the mixed-metal cases, the larger metal ion was found to occupy the octahedral site in the cluster while the smaller ion occupies the tetrahedral positions, suggesting a selective, ligand-directed assembly process for the mixed-metal species. Variable temperature magnetic measurements for paramagnetic MOFs 3 and 6-8 were consistent with the site occupancies determined crystallographically, and indicated weak intra-cluster antiferromagnetic coupling for 3 and 8. Comparison between the crystal structures of 2, 3 and 5-8 and those reported for 1 and 4 in the literature reveal close resemblances between linker environments, with important intermolecular stilbene-stilbene geometries that are comparable in all cases. Interestingly, pale-colored 1-3 and 5-7 display very similar emission profiles upon excitation at λ(ex) = 350 nm, whereas dark-colored 4 and 8 do not exhibit detectable emission spectra. The bright, well-resolved luminescence of 1, 2 and 5 is ascribed to rigidification of the linker upon coordination to the d(10) metal ions, whereas the weaker emission observed for 3, 6 and 7 is presumably a result of quenching due to close proximity of the linker to one or more paramagnetic ions. Time-resolved measurements for 1, 2, 5 and 6 reveal biexponential emission decays, where the lifetime of the longer-lived state corresponds to observed variations in the nearest-neighbor cofacial stilbene-stilbene distances in their crystal structures. For 3, a monoexponential decay with shorter lifetime was determined, indicating significant paramagnetic quenching of its emissive state.

Hydrogen bonding and coordination bonding in the electronically excited states of Cu2(L)2 (L=5-(4-pyridyl)tetrazole)MeOH: a TDDFT study

The luminescent metal organic framework (MOF), Cu2(L)2·MeOH (L=5-(4-pyridyl)tetrazole), was studied using time-dependent density functional theory (TDDFT). A combination of frontier molecular orbitals and electronic configuration analysis revealed that the emission mechanism was a ligand to metal charge transition (LMCT) rather than a metal to ligand charge transfer (MLCT). Hydrogen bonding significantly changed the nature of the frontier orbital and the luminescence. Electronic transition energies predicted that the hydrogen bonding in excited state would become weaker with an electronic spectral blue-shift. The bond lengths, frequencies, and binding energies indicated weakening of the hydrogen bonding in the excited state, which can affect emissions in two ways, including: (i) a decrease in the electronic coupling between methanol and the motif and suppressing the occurrence of the photo-induced electron transfer (PET); and (ii) increasing the energy gap between S1 and S0, leading to radiative transition. Coordination bonding was also investigated in the excited state through bond lengths, frequencies, and bond orders. Coordination bonds were found to become stronger in the excited state leading to an enhancement of the luminescence.

Multistimuli two-color luminescence switching via different slip-stacking of highly fluorescent molecular sheets

Color tuning and switching of the solid-state luminescence of organic materials are attractive subjects for both the fundamental research and practical applications such as optical recording. We report herein cyanostilbene-based highly luminescent molecular sheets which exhibit two-color fluorescence switching in response to pressure, temperature, and solvent vapor. The origin for the multistimuli luminescence switching is the two-directional shear-sliding capability of molecular sheets, which are formed via intermolecular multiple C-H···N and C-H···O hydrogen bonds. The resulting two distinctive crystal phases are promoted by different modes of local dipole coupling, which cause a substantial alternation of π-π overlap. These changes can be directly correlated with the subsequent intermolecular excitonic and excimeric coupling in both phases, as demonstrated by an in-depth theory-assisted spectroscopic and structural study. Finally, we have prepared a first device demonstrator for rewritable fluorescent optical recording media which showed multistimuli luminescence tuning with fast response. Our multistimuli responsive system is unique in terms of the slip-stacking of molecular sheets and thus provides a novel concept of rewritable fluorescent optical recording media.

Electronic properties and supramolecular organization of terminal bis(alkylethynyl)-substituted benzodithiophenes

Benzodithiophene (BDT) was symmetrically bisubstituted in the terminal positions with five different alkynes C≡C-(C(n)H(2n+1)) with n = 4, 6, 8, 10, 12. The materials were characterized as potential materials for field-effect transistor applications. Electrochemical measurements in solution and photophysical measurements in solution and in the solid state, together with UV photoelectron spectroscopy in air and quantum-chemical calculations, elucidate the nature of the frontier orbitals and of the excited states as well as their deactivation pathways. Structural information on the molecular assembly in the solid state, both at room temperature and at elevated temperatures, is obtained by a combination of DSC, polarized optical microscopy, and 2D-WAXS, which point to the crystallinity of the compounds in all phases and reveal π-stacking arrangements independently of the length of the alkyl side chains.

Synthesis and Conformational Analysis of Macrocyclic Dihydroxystilbenes Linked between thepara–para Positions

A new family of diphenylethanes has been synthesized as conformationally restricted analogues of antimitotic combretastatins. The two phenyl rings are linked between the para-phenolic positions through a 3-oxapentamethylene or hexamethylene chain. The key macrocyclization step was achieved in moderate yields by using an intramolecular McMurry pinacol coupling of linked aromatic dialdehydes, except for the nitro-substituted compounds. The relative stereochemistry of the isomeric pinacols was determined by a combination of spectroscopic, chemical derivatization, and molecular-modeling approaches. The NMR spectra of these compounds (with a polyoxygenated crownophane skeleton) indicate severe conformational restrictions relative to their parent combretastatins; the rotation of the phenyl rings is hampered by interactions of their substituents and the linker and the conformational restrictions imposed by the substituted bridge.

Highly fluorescent crystalline and liquid crystalline columnar phases of pyrene-based structures

A concept for highly ordered solid-state structures with bright fluorescence is proposed: liquid crystals based on tetraethynylpyrene chromophores, where the rigid core is functionalized with flexible, promesogenic alkoxy chains. The synthesis of this novel material is presented. The thermotropic properties are studied by means of differential scanning calorimetry (DSC), cross-polarized optical microscopy (POM), and X-ray diffraction. The mesogen possesses an enantiotropic Col(h) phase over a large temperature range before clearing. The material is highly fluorescent in solution and, most remarkably, in the condensed state, with a broad, strongly red shifted emission. Fluorescence quantum yields (Phi(F)) have been determined to be 70% in dichloromethane solution and 62% in the solid state. Concentration- and temperature-dependent absorption and emission studies as well as quantum-chemical calculations on isolated molecules and dimers are used to clarify the type of intermolecular interactions present as well as their influence on the fluorescence quantum yield and spectral properties of the material. The high luminescence efficiency in the solid state is ascribed to rotated chromophores, leading to an optically allowed lowest optical transition.

Solid-state optical properties of linear polyconjugated molecules: pi-stack contra herringbone

The intermolecular arrangement in the solid state and the consequences on the optical and photophysical properties are studied on different derivatives of oligophenylenevinylenes by UV/VIS absorption and angular-resolved polarized fluorescence spectroscopy. Unsubstituted distyrylbenzene (DSB) organizes in a herringbone manner, with the long axes of the molecules oriented in parallel, but the short axes almost perpendicular to each other. Fluorinated distyrylbenzene (F(12)DSB) as well as the DSB:F(12)DSB cocrystals prefer cofacial pi-stacking in the solid state. For all structures, the consequence of the parallel alignment of the transition moments is a strongly blueshifted H-type absorption spectrum and a low radiative rate constant k(F). Significant differences are observed for the emission spectra: the perpendicular arrangement of the short axes in DSB crystals leads to only very weak intermolecular vibronic coupling. Hence the emission spectrum is well structured, very similar to the one in solution. For F(12)DSB and DSB:F(12)DSB, the cofacial arrangement of the adjacent molecules enables strong intermolecular vibronic coupling of adjacent molecules. Thus, an unstructured and strongly redshifted excimerlike emission spectrum is observed. The differences in the electronic nature of the excited states are highlighted by quantum-chemical calculations, revealing the contribution of interchain excitations to the electronic transitions.

Influence of connectivity and porosity on ligand-based luminescence in zinc metal-organic frameworks

Applications of metal-organic frameworks (MOFs) require close correlation between their structure and function. We describe the preparation and characterization of two zinc MOFs based on a flexible and emissive linker molecule, stilbene, which retains its luminescence within these solid materials. Reaction of trans-4,4'-stilbene dicarboxylic acid and zinc nitrate in N,N-dimethylformamide (DMF) yielded a dense 2-D network, 1, featuring zinc in both octahedral and tetrahedral coordination environments connected by trans-stilbene links. Similar reaction in N,N-diethylformamide (DEF) at higher temperatures resulted in a porous, 3-D framework structure, 2. This framework consists of two interpenetrating cubic lattices, each featuring basic zinc carboxylate vertices joined by trans-stilbene, analogous to the isoreticular MOF (IRMOF) series. We demonstrate that the optical properties of both 1 and 2 correlate with the local ligand environments observed in the crystal structures. Steady-state and time-resolved spectroscopic measurements reveal that the stilbene linkers in the dense structure 1 exhibit a small degree of interchromophore coupling. In contrast, the stilbenoid units in 2 display very little interaction in this low-density 3-D framework, with excitation and emission spectra characteristic of monomeric stilbenes, similar to the dicarboxylic acid in dilute solution. In both cases, the rigidity of the stilbene linker increases upon coordination to the inorganic units through inhibition of torsion about the central ethylene bond, resulting in luminescent crystals with increased emission lifetimes compared to solutions of trans-stilbene. The emission spectrum of 2 is found to depend on the nature of the incorporated solvent molecules, suggesting use of this or related materials in sensor applications.

Theoretical Studies of Phosphorescence Spectra of Tris(2,2‘-bipyridine) Transition Metal Compounds

Phosphorescence spectra of tris(2,2'-bipyridine) metal compounds, [M(bpy)3]n+, where M = Zn(II), Ru(II), Os(II), Rh(III), and Ir(III), were calculated using a harmonic oscillator approximation of adiabatic potential surfaces obtained by density functional theory (DFT). Using the Huang-Rhys (S) factors calculated by theoretical Franck-Condon analysis of T1 and S0 geometries, we successfully reproduced the emission spectra observed under various conditions by nonempirical calculations. The simulations of well-structured spectra of the Zn(II), Rh(III), and Ir(III) compounds confirmed that the emission originated from localized ligand-centered excited states with considerably distorted geometries of C2 symmetry. The spectrum simulation revealed that the phosphorescence state of [Ru(bpy)3]2+ was localized 3MLCT both in a solution and a glass matrix. Furthermore, a highly resolved phosphorescence spectrum observed for [Ru(bpy)3]2+ doped in a [Zn(bpy)3](ClO4)2 crystal was reproduced well using the geometry of the localized 3MLCT by assuming mode-specific broadening of low-frequency intramolecular vibrational modes. The deuterium effects of the electronic origins of the doped crystal observed by Riesen et al. were in excellent agreement with those predicted for the localized 3MLCT. However, the calculated satellite structures of the localized 3MLCT involving bpy-h8 in [Ru(bpy-h8)(3-x)(bpy-d8)x]2+ (x = 1,2) exhibited only the bpy-h8 vibrational modes, inconsistent with the simultaneous appearance of both bpy-h8 and bpy-h8 modes in the observed spectra. A simulation on the basis of the geometry of the delocalized 3MLCT was in reasonable agreement with an unresolved spectrum observed for a neat crystal of [Ru(bpy)3](PF6)2, which is inconsistent with the assignments of localized 3MLCT on the basis of the electronic origins. The inconsistency of the assignment on the basis of the adiabatic model is discussed in terms of vibronic coupling between the localized 3MLCT states. The 3MLCT state in [Os(bpy)3]2+ seems to vary with the environment: a fully localized 3MLCT in a solution, partially localized in a glass matrix, and delocalized in PF6 salts.

Stilbenophane analogues of deoxycombretastatin A-4

A new family of polyoxygenated stilbenophanes has been synthesized as conformationally restricted analogues of antimitotic combretastatins. By means of the McMurry olefination process, compounds derived from diethyleneglycol and 1,6-hexanediol were obtained, whereas Grubbs' catalyst failed in producing the ring-closing metathesis to this kind of macrocyclic products.

Computational Study of the Structure, Dynamics, and Photophysical Properties of Conjugated Polymers and Oligomers under Nanoscale Confinement

Computational simulations were used to investigate the dynamics and resulting structures of several para-phenylenevinylene (PPV) based polymers and oligomers (PPV, 2-methoxy-5-(2'-ethyl-hexyloxy)-p-phenylenevinylene --> MEH-PPV and 2,5,2',5'-tetrahexyloxy-7,8'-dicyano-p-phenylenevinylene --> CN-PPV). The results show how the morphology and structure are controlled to a large extent by the nature of the solute-solvent interactions in the initial solution-phase preparation. Secondary structural organization is induced by using the solution-phase structures to generate solvent-free single molecule nanoparticles. Isolation of these single molecule nanostructures from microdroplets of dilute solution results in the formation of electrostatically oriented nanostructures at a glass surface. Our structural modeling suggests that these oriented nanostructures consist of folded PPV conjugated segments with folds occurring at tetrahedral defects (sp3 C-C bonds) within the polymer chain. This picture is supported by detailed experimental fluorescence and scanning probe microscopy studies. We also present results from a fully quantum theoretical treatment of these systems which support the general conclusion of structure-mediated photophysical properties.