Synergistic Effect in an Au−Ag Alloy Nanocatalyst: CO Oxidation

Effect of Ligand Attachment at Ag11 for CO Oxidation: A Computational Investigation

Heterogeneous CO oxidation is a demanding reaction at room temperature due to the high activation energy required to break the O=O bond. While several metal clusters are reported to oxidize CO successfully, they fall short of their selectivity for the reaction and recyclability. In this regard, there is a need for economic catalysts with high catalytic activity, low activation barrier, and reusability. In this study, we have investigated the catalytic activity of the neutral pristine and ligated Ag11 cluster toward CO oxidation. We investigated the attachment effect of three organic donor ligands: trimethylphosphine, triethylphosphine, and N-ethyl pyrrolidone to the Ag11 cluster. Our results show that including donor ligands on the Ag11 cluster surface can significantly reduce the barrier heights for CO oxidation. The minimum barrier heights with the system coordinated with triethylphosphine showed the lowest activation barrier of 1.06 kcal/mol compared to the high activation barrier of 14.77 kcal/mol recorded for the pristine cluster. Exploration of the reaction mechanism and charge analysis showed that the electron donor ligands activate O2 via charge donation, thereby reducing the barrier heights of CO oxidation.

Boosting the Photocatalysis of Plasmonic Au-Cu Nanocatalyst by AuCu-TiO2 Interface Derived from O2 Plasma Treatment

Plasmonic gold (Au) and Au-based nanocatalysts have received significant attention over the past few decades due to their unique visible light (VL) photocatalytic features for a wide variety of chemical reactions in the fields of environmental protection. However, improving their VL photocatalytic activity via a rational design is prevalently regarded as a grand challenge. Herein we boosted the VL photocatalysis of the TiO₂-supported Au-Cu nanocatalyst by applying O₂ plasma to treat this bimetallic plasmonic nanocatalyst. We found that O₂ plasma treatment led to a strong interaction between the Au and Cu species compared with conventional calcination treatment. This interaction controlled the size of plasmonic metallic nanoparticles and also contributed to the construction of AuCu-TiO₂ interfacial sites by forming AuCu alloy nanoparticles, which, thus, enabled the plasmonic Au-Cu nanocatalyst to reduce the Schottky barrier height and create numbers of highly active interfacial sites. The catalyst's characterizations and density functional theory (DFT) calculations demonstrated that boosted VL photocatalytic activity over O₂ plasma treated Au-Cu/TiO₂ nanocatalyst arose from the favorable transfer of hot electrons and a low barrier for the reaction between CO and O with the construction of large numbers of AuCu-TiO₂ interfacial sites. This work provides an efficient approach for the rational design and development of highly active plasmonic Au and Au-based nanocatalysts and deepens our understanding of their role in VL photocatalytic reactions.

Influence of the photodeposition sequence on the photocatalytic activity of plasmonic Ag-Au/TiO2 nanocomposites

Bimetallic Ag-Au/TiO₂ nanocomposites were synthesized by sequential photodeposition in order to investigate the effect of surface plasmon resonance (SPR) properties on photocatalytic activity for solar water splitting and methylene blue (MB) degradation. The photodeposition times were optimized for monometallic Ag/TiO₂ and Au/TiO₂ nanocomposites to yield maximum SPR absorption in the visible range. It was found that the photocatalytic activity of bimetallic Ag-Au/TiO₂ nanocomposites outperformed monometallic nanocomposites only when Au was photodeposited first on TiO₂, which was attributed to Au-core-Ag-shell nanoparticle morphology. In contrast, reversing the photodeposition order resulted in Ag-Au alloy nanoparticle morphology, which was mediated by the galvanic replacement reaction during the second photodeposition. Alloying was not beneficial to the photocatalytic activity. These results demonstrate alloying during sequential photodeposition providing new insights for the synthesis of TiO₂-based photocatalysts with plasmon-enhanced absorption in the visible range.

Fe(iii) and Cr(vi) ions' removal using AgNPs/GO/chitosan nanocomposite as an adsorbent for wastewater treatment

Heavy metal ions in water refer to significant risks to the biological system due to their high toxicity. Therefore, the decontamination of water polluted by heavy metal ions attracts significant interest of researchers. Adsorption by nanomaterials has been a widely used technique for removing heavy metal ions from water. Chitosan was extracted from shrimp shellfish and mixed with laboratory-prepared AgNPs/GO in the ratio of 3 : 1. A series of tests evaluates the best condition of pH, amount of adsorbent, retention time, stirring speed, temp, and initial concentration. The research was conducted under various conditions. Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich isotherms were also tested. Also, the column adsorption experiment was carried out on industrial wastewater at different flow rates and column bed heights. The optimal values of the contact time, pH, and adsorbent dose of Cr(vi) were found to be 80 min, 4, and 0.1 g 100 mL⁻¹, respectively, at room temperature (30 °C), agitation at 150 rpm, and initial concentration of 50 ppm. On the other hand, the optimal value of contact time, pH, and adsorbent dose of Fe(iii) were found to be 30 min, 6, and 0.02 g 100 mL⁻¹, respectively, at room temp (30 °C) with a stirring speed of 250 rpm and an initial concentration of 40 ppm. For Cr(vi) and Fe(iii), equilibrium studies show that the data fit the Freundlich isotherm well (correlation coefficient, R² = 0.98) (III). A link between the pseudo-second order active model and data fitting the pseudo-first order active models were made. Within the intraparticle diffusion model, there are four stages that the mechanism must go through before it is at equilibrium. The adsorbent was tested in an industrial adsorbent column. This test proves that the nanocomposite's adsorption capacity can be restored by washing it with 0.1 M HCl, as shown by the periodicity test. After four cycles, the amount of Cr(vi) adsorbed on AgNPs/GO/chitosan was just 20%, which is insufficient for further adsorption experiments. Cr(vi) removal rates (%R) decreased slightly.

Steps of AgNPs/GO/chitosan nanocomposite preparation.

First-principles study on CO oxidation on CuO(111) surface prefers the Eley-Rideal or Langmuir-Hinshelwood pathway

Using the first-principles approach, we investigated the electronic and chemical properties of cupric oxide CuO (110) and CuO (111) and substantiated their catalytic activity toward CO oxidation. It is found that CuO (111) surface is more stable than the CuO (110) surface. We firstly study that adsorption of CO and O₂on perfect, oxygen vacancies and Cu-anchored CuO (111) surface. It is found that adsorption of CO and O₂molecules are chemical. Then we selected the most stable adsorption structure of CO/O₂to investigated the CO oxidation mechanism on different surface, here we choose to study the Langmuir-Hinshelwood (LH) mechanism and Eley-Rideal (ER) mechanism. The results show that perfect and O_vacancyCuO (111) surface is more inclined to LH mechanism, while the Cu-anchored CuO (111) surface is more inclined to ER mechanism. The results show that CuO catalyst is very effective for CO oxidation. Our work provides a deep understanding for the search of economical and reasonable CO oxidation catalysts.

On a high photocatalytic activity of high-noble alloys Au-Ag/TiO2 catalysts during oxygen evolution reaction of water oxidation

The analysis via density functional theory was employed to understand high photocatalytic activity found on the Au–Ag high-noble alloys catalysts supported on rutile TiO₂ during the oxygen evolution of water oxidation reaction (OER). It was indicated that the most thermodynamically stable location of the Au–Ag bimetal-support interface is the bridging row oxygen vacancy site. On the active region of the Au–Ag catalyst, the Au site is the most active for OER catalyzing the reaction with an overpotential of 0.60 V. Whereas the photocatalytic activity of other active sites follows the trend of Au > Ag > Ti. This finding evident from the projected density of states revealed the formation of the trap state that reduces the band gap of the catalyst promoting activity. In addition, the Bader charge analysis revealed the electron relocation from Ag to Au to be the reason behind the activity of the bimetallic that exceeds its monometallic counterparts.

Support, composition, and ligand effects in partial oxidation of benzyl alcohol using gold–copper clusters

The effect of metallic composition, support, and ligands on catalytic performance using AuCu clusters in benzyl alcohol oxidation is investigated.

Activity of Ag/CeZrO2, Ag+K/CeZrO2, and Ag-Au+K/CeZrO2 Systems for Lean Burn Exhaust Clean-Up

Herein, the activity of Ag and bimetallic Au-Ag catalysts, supported over Ce0.85Zr0.15O2 (CZ), was investigated in a complex stream, whose components included CO, C3H8, NO, O2, and, optionally, an injection of water vapor. In such a stream, three of the possible reactions that can occur are CO oxidation, propane combustion, and NO oxidation. The aim of these studies was to explore whether silver, due to its strong affinity to oxygen, will counteract the stabilization of oxygen by potassium. The effect of the presence of potassium ions on the activity of the monometallic silver catalysts is beneficial in the complex stream without water vapor in all three studied reactions, although it is negligible in the model CO stream. It has been shown that water vapor strongly suppresses the activity of the Ag+K/CZ catalyst, much more so than that of the Ag/CZ catalyst. The second purpose of the work was to determine whether the negative effect of potassium ions on the activity of nanogold catalyst can be countered by the addition of silver. Studies in a model stream for CO oxidation have shown that, for a catalyst preloaded with gold, the effect of potassium is nulled by silver, and the activity of AuAg + 0.15 at%K/CZ and AuAg + 0.30 at%K/CZ is the same as that of the monometallic Au catalyst. Conversely, when the reaction is carried out in a complex stream, containing CO, C3H8, NO, O2, and water vapor, the presence of water vapor leads to higher CO conversion as well as increased NO2 formation and slightly suppresses the C3H8 combustion.

Sequential electrodeposition of Cu-Pt bimetallic nanocatalysts on boron-doped diamond electrodes for the simple and rapid detection of methanol

In this work, a novel electrochemical sensor for methanol determination was established by developing a bimetallic catalyst with superiority to a monometallic catalyst. A Cu–Pt nanocatalyst was proposed and easily synthesized by sequential electrodeposition onto a boron-doped diamond (BDD) electrode. The successful deposition of this nanocatalyst was then verified by scanning electron microscopy and energy dispersive spectroscopy. The electrodeposition technique and sequence of metal deposition significantly affected the surface morphology and electrocatalytic properties of the Cu–Pt nanocatalyst. The presence of Cu atoms reduced the adsorption of other species on the Pt surface, consequently enhancing the long-term stability and poisoning tolerance of Pt nanocatalysts during the methanol oxidation process. This advanced sensor was also integrated with sequential injection analysis to achieve automated and high-throughput analysis. This combination can significantly improve the detection limit of the developed sensor by approximately 100 times compared with that of the cyclic voltammetric technique. The limit of detection of this sensor was 83 µM (S/N = 3), and wide linearity of the standard curve for methanol concentrations ranging from 0.1 to 1000 mM was achieved. Finally, this proposed sensor was successfully applied to detect methanol in fruit and vegetable beverage samples.

Effect of the Metal Deposition Order on Structural, Electronic and Catalytic Properties of TiO2-Supported Bimetallic Au-Ag Catalysts in 1-Octanol Selective Oxidation

Au and Ag were deposited on TiO2 modified with Ce, La, Fe or Mg in order to obtain bimetallic catalysts to be used for liquid-phase oxidation of 1-octanol. The effects of the deposition order of gold and silver, and the nature of the support modifying additives and redox pretreatments on the catalytic properties of the bimetallic Au-Ag catalysts were studied. Catalysts were characterized by low-temperature nitrogen adsorption–desorption, energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy. It was found that pretreatments with hydrogen and oxygen at 300 °C significantly decreased the activity of AuAg catalysts (silver was deposited first) and had little effect on the catalytic properties of AgAu samples (gold was deposited first). The density functional theory method demonstrated that the adsorption energy of 1-octanol increased for all positively charged AuxAgyq (x + y = 10, with a charge of q = 0 or +1) clusters compared with the neutral counterparts. Lanthanum oxide was a very effective promoter for both monometallic and bimetallic gold and silver catalysts in the studied process.

Mesoporous gold-silver alloy films towards amplification-free ultra-sensitive microRNA detection

Herein, we report the preparation of mesoporous gold (Au)-silver (Ag) alloy films through the electrochemical micelle assembly process and their applications as microRNA (miRNA) sensors. Following electrochemical deposition and subsequent removal of the templates, the polymeric micelles can create uniformly sized mesoporous architectures with high surface areas. The resulting mesoporous Au-Ag alloy films show high current densities (electrocatalytic activities) towards the redox reaction between potassium ferrocyanide and potassium ferricyanide. Following magnetic isolation and purification, the target miRNA is adsorbed directly on the mesoporous Au-Ag film. Electrochemical detection is then enabled by differential pulse voltammetry (DPV) using the [Fe(CN)6]3-/4- redox system (the faradaic current for the miRNA-adsorbed Au-Ag film decreases compared to the bare film). The films demonstrate great advantages towards miRNA sensing platforms to enhance the detection limit down to attomolar levels of miR-21 (limit of detection (LOD) = 100 aM, s/n = 3). The developed enzymatic amplification-free miniaturized analytical sensor has promising potential for RNA-based diagnosis of diseases.

Green synthesis of mono and bimetallic alloy nanoparticles of gold and silver using aqueous extract of Chlorella acidophile for potential applications in sensors

Bimetallic or alloy nanoparticles (NPs) have improved properties compared to their monometallic forms. Microalgae being rich in biocompatible reductants and being ecofriendly are potential sources to synthesize fuctionalized NPs. In this study, biosynthesis of silver, gold, and bimetallic NPs was carried out via bioreduction using aqueous extract of algal isolate Chlorella acidophile, inhabitant of non-arable land. C. acidophile is known to contain highly bioactive functional moieties, which can serve as nanobiofactories for metallic NPs. Various characterization techniques viz, UV-visible spectrophotometer, X-ray diffraction analysis, X-ray photo-electron spectroscopy, and Raman spectroscopy were employed to determine their composition, structure, and crystal phase. The monometallic and bimetallic particles were found to be crystalline state and generally in a spherical shape. Their size ranged from 5 to 45 nm and the corresponding FTIR spectra indicated that the specific organic functional groups from algal extract were involved in the bio-reduction. Furthermore, the core-shell in the case of Au-Ag NPs was formed due to the simultaneous reduction of gold and silver ions. An enhanced and more pronounced Raman spectra of Au-Ag NP compared to individual Au NP indicated the improved properties of bimetallic NPs, the latter having been of immense potential to be used as sensors in industries.

TiO2-supported Au-Ag plasmonic nanocatalysts achieved by plasma restructuring and activation

Plasmonic Au-Ag/TiO₂ bimetallic nanocatalyst is regarded as a promising visible-light (VL) photocatalyst due to its wide light absorption and potentially enhanced activity. For its preparation, Au precursors usually contain Cl and co-impregnation/co-deposition suffers from AgCl precipitation, and consequently Au and Ag have to be sequentially supported. However, Au and Ag species of the sequential preparation are individually isolated and difficult to be homogeneously mixed. Here we report an Au-Ag plasmonic nanocatalyst achieved by plasma restructuring and activation from the sequential preparation. The isolated cationic Au and Ag species on the sequentially-prepared Au-Ag/TiO₂ sample are restructured to be homogeneously mixed and highly activated by O₂ plasma, which can be partially auto-reduced to Au-Ag bimetallic nanoparticles within the induction period of a few minutes in VL photocatalytic oxidation of CO. The Au-Ag plasmonic nanocatalyst exhibits a strongly enhanced activity in the VL photocatalytic reaction. The contribution of O₂ plasma treatment and the enhancement mechanism for the Au-Ag plasmonic nanocatalyst are disclosed.

Recent progress on removal of indoor air pollutants by catalytic oxidation

Indoor air pollutant is a serious problem due to its wide diversity and variability. The harmful substances from construction materials and decorative materials may make the indoor air pollution become more and more serious and cause serious health problems. In this paper, the review summarizes the advanced technologies for the removal of indoor air pollutants and the development in the treatment of indoor air pollution by catalytic oxidation technologies. Meanwhile, some catalytic oxidation mechanisms of indoor air pollutants are proposed in detail, and suggestions for the indoor air pollution treatment are also presented, in order to provide some reference for subsequent research.

Applicability of QCM-D for Quantitative Measurements of Nano- and Microparticle Deposition Kinetics: Theoretical Modeling and Experiments

A new theoretical model is formulated for the quantitative analysis of quartz crystal microbalance (QCM) response for heterogeneous loads consisting of nano- and microparticles. The influence of particle coverage and structure is described using a universal correction function in an ab initio manner. Explicit analytical expressions for the frequency and dissipation shifts are derived for the entire range of particle size under the rigid contact regime. The solvent coupling functions are also calculated to determine the dry coverage using the QCM measurements. These expressions furnish the upper limit of the QCM signal, which can be attained for a sensor providing perfect adhesion of particles. Correction functions accounting for the finite adhesion strength (soft contact regime) are also derived. The theoretical results are confronted with QCM and atomic force microscopy measurements of positively charged polymer particle deposition on silica sensors. The main features of the theoretical model are confirmed, especially the abrupt decrease in the QCM wet mass with the particle coverage and the overtone number. The latter effect is especially pronounced for microparticles under the soft contact regime, where the higher-number overtones produce a negligible QCM signal. These results represent a useful reference data for the interpretation of protein and bioparticles, for example, virus and bacteria attachment processes to various substrates.

Efficient metal overlayer catalysts on the Nb2C monolayer for CO oxidation from first-principles screening

Based on the first-principles calculation, the configurations of different metal overlayers on the monolayer Nb₂C (MXene) (M_ML/Nb₂C) (M  =  Rh, Ir, Pd, Pt, Ag, Au) were studied aiming to find a kind of complex system with high CO-tolerance and high CO conversion efficiency. Combined with the stability of the composite systems and their adsorption properties on small gas molecules, Ag_ML/Nb₂C was screened out and further tested for CO oxidation reaction. By comparing the energy barriers of different reaction pathways, we concluded that CO oxidation reaction could be carried out on Ag_ML/Nb₂C var the LH mechanism with a small energy barrier of 0.35 eV. The rate-determining step was the oxidation of CO by the adsorbed oxygen atom. The Ag_ML/Nb₂C showed good activity for CO oxidation, which would provide a theoretical basis for designing the electrode material for the proton exchange membrane fuel cells (PEMFCs).

Simulation of the Light Transmittance in Macroporous Silica

This paper focuses on the light transmittance of macroporous silica as a photocatalyst carrier. In addition to the characteristics of photocatalysts, the structure of porous bulk is also important since it affects the propagation of light. Realistic porous structures are generated by a Voronoi-based approach. Four morphological parameters are highly controlled during generating, that is, porosity, coefficient of variation, diameter ratio and normalized curvature. Finite element method (FEM) is used to simulate the propagation of light in the porous models in the visible light range. The intensity shows a quadratic decrease with the increase of the depth of light propagation. The influences of the morphological parameters on the light transmittance are analysed. It turns out that the porosity has a great influence on the light transmittance while the coefficient of variation and the diameter ratio have small ones. Moreover, the influence of the normalized curvature is little. Besides, the effect of the wavelength of visible light can not be ignored. With the simulation, the depth of visible light entering the porous silica can be estimated, which is challenging to access experimentally.

Catalytic oxidation mechanisms of carbon monoxide over single- and double-vacancy Mn-embedded graphene

CO oxidation on MnC₃ and MnC₄ has fast kinetics and a low energy barrier.

CeO2 -Encapsulated Hollow Ag-Au Nanocage Hybrid Nanostructures as High-Performance Catalysts for Cascade Reactions

Inspired by bio-enzymes, multistep cascade reactions are highly attractive in catalysis. Despite extensive research in recent years, it remains a challenge to promote the stability and activity of catalysts. Here, well-defined core-shell structured Ag-Au nanocage@CeO₂ (Ag-Au NC@CeO₂ ) are designed by a simple and facile self-assembly method. The results indicate that the Ag-Au NC@CeO₂ has glucose oxidase-like activity and intrinsic peroxidase-like activity at the same time. As expected, Ag-Au NC@CeO₂ hybrid nanomaterials exhibit cascade reactions activity. Moreover, the hybrid materials are promising to detect glucose without bio-enzymes. This research has potential applications in biomedicine and biomimetic catalysis.

Enhancement of Single Molecule Raman Scattering using Sprouted Potato Shaped Bimetallic Nanoparticles

Herein, for the first time, we report the single molecule surface enhanced resonance Raman scattering (SERRS) and surface enhanced Raman scattering (SERS) spectra with high signal to noise ratio (S/N) using plasmon-active substrates fabricated by sprouted potato shaped Au-Ag bimetallic nanoparticles, prepared using a new one-step synthesis method. This particular shape of the nanoparticles has been obtained by fixing the amount of Au and carefully adjusting the amount of Ag. These nanoparticles have been characterized using scanning electron microscopy, extinction spectroscopy, and glancing angle X-ray diffraction. The single molecule sensitivity of SERS substrates has been tested with two different molecular Raman probes. The origin of the electromagnetic enhancement of single molecule Raman scattering in the presence of sprouted shape nanoparticles has been explained using quasi-static theory as well as finite element method (FEM) simulations. Moreover, the role of (i) methods for binding Raman probe molecules to the substrate, (ii) concentration of molecules, and (iii) Au-Ag ratio on the spectra of molecules has been studied in detail.

Synthesis and Characterization of Te Nanotubes Decorated with Pt Nanoparticles for a Fuel Cell Anode/Cathode Working at a Neutral pH

In fuel-cell technology development, one of the most important objectives is to minimize the amount of Pt, the most employed material as an oxygen reduction and methanol oxidation electro-catalyst. In this paper, we report the synthesis and characterization of Te nanotubes (TeNTs) decorated with Pt nanoparticles, readily prepared from stirred aqueous solutions of PtCl2 containing a suspension of TeNTs, and ethanol acting as a reducing agent, avoiding the use of any hydrophobic surfactants such as capping stabilizing substance. The obtained TeNTs decorated with Pt nanoparticles (TeNTs/PtNPs) have been fully characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area diffraction patterns (SAD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). We demonstrated that the new material can be successfully employed in fuel cells, either as an anodic (for methanol oxidation reaction) or a cathodic (for oxygen reduction reaction) electrode, with high efficiency in terms of related mass activities and on-set improvement. Remarkably, the cell operates in aqueous electrolyte buffered at pH 7.0, thus, avoiding acidic or alkaline conditions that might lead to, for example, Pt dissolution (at low pH), and paving the way for the development of biocompatible devices and on-chip fuel cells.

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance-improved and cost-reduced solid-solution alloy nanoparticles of the Cu-Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_x Ru_1-x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.

Detarium microcarpum: A novel source of nutrition and medicine: A review

Detarium microcarpum is a plant indigenous to Africa, which occurs naturally in many African countries, particularly in savannah regions. Its leaves and fruits are used mainly as food and as folk medicine. It has anti-diabetic, antioxidant, and hepatitis C inhibitor properties and has been traditionally utilised in cancer treatment. This review examines published work on the nutritional, pharmacological, and traditional uses of Detarium microcarpum. This plant may become valuable if the fruit, stems, roots, and leaves are extracted for nutraceutical purposes.