Synthesis and Characterization of Pt(0) Nanoparticles in Imidazolium Ionic Liquids

Electrocatalyst Fabrication Using Metal Nanoparticles Prepared in Ionic Liquids

Metal nanoparticle-based electrocatalysts are widely used in electronic devices, which serve for electrochemical reactions like oxygen reduction reaction, alcohol oxidation and CO2 reduction reaction. These catalyst-dependent reactions are the key of the emerging clean energy systems. Catalyst design and synthesis therefore have received keen attention in past decades. We are motivated to study synthesis approaches of metal nanoparticle-based electrocatalysts using ionic liquids (ILs), which are promising solvents for the nanoparticle preparation because of their unique physicochemical properties. In this personal account, we review our previous and present works on nanoparticle preparation in IL and utilization of the obtained nanoparticles as electrocatalysts.

Antimicrobial and antibiofilm activity of silver nanoparticles against Salmonella Enteritidis

Salmonella enterica serotype Enteritidis is one of the main pathogens associated with foodborne illnesses worldwide. Biofilm formation plays a significant role in the persistence of pathogens in food production environments. Owing to an increase in antimicrobial resistance, there is a growing need to identify alternative methods to control pathogenic microorganisms in poultry environments. Thus, this study aimed to synthesize silver nanoparticles (AgNPs) and evaluate their antibiofilm activity against poultry-origin Salmonella Enteritidis in comparison to a chemical disinfectant. AgNPs were synthesized, characterized, and tested for their minimum inhibitory concentration, minimum bactericidal concentration, and antibiofilm activity against S. Enteritidis strains on polyethylene surfaces. The synthesized AgNPs, dispersed in a liquid medium, were spherical in shape with a mean diameter of 6.2 nm. AgNPs exhibited concentration-dependent bactericidal action. The bacterial reduction was significantly higher with AgNPs (3.91 log10 CFU [Formula: see text] cm-2) than that with sanitizer (2.57 log10 CFU ∙ cm-2). Regarding the time of contact, the bacterial count after a contact time of 30 min was significantly lower than that after 10 min. The AgNPs exhibited antimicrobial and antibiofilm activity for the removal of biofilms produced by S. Enteritidis, demonstrating its potential as an alternative antimicrobial agent. The bactericidal mechanisms of AgNPs are complex; hence, the risk of bacterial resistance is minimal, making nanoparticles a potential alternative for microbial control in the poultry chain.

Tunable Aryl Alkyl Ionic Liquid Supported Synthesis of Platinum Nanoparticles and Their Catalytic Activity in the Hydrogen Evolution Reaction and in Hydrosilylation

Tunable aryl alkyl ionic liquids (TAAILs) are ionic liquids (ILs) with a 1-aryl-3-alkylimidazolium cation having differently substituted aryl groups. Herein, nine TAAILs with the bis(trifluoromethylsulfonyl)imide anion are utilized in combination with and without ethylene glycol (EG) as reaction media for the rapid microwave synthesis of platinum nanoparticles (Pt-NPs). TAAILs allow the synthesis of small NPs and are efficient solvents for microwave absorption. Transmission electron microscopy (TEM) shows that small primary NPs with sizes of 2 nm to 5 nm are obtained in TAAILs and EG/TAAIL mixtures. The Pt-NPs feature excellent activity as electrocatalysts in the hydrogen evolution reaction (HER) under acidic conditions, with an overpotential at a current density of 10 mA cm^-2 as low as 32 mV vs the reversible hydrogen electrode (RHE), which is significantly lower than the standard Pt/C 20% with 42 mV. Pt-NPs obtained in TAAILs also achieved quantitative conversion in the hydrosilylation reaction of phenylacetylene with triethylsilane after just 5 min at 200 °C.

Size characterization of nanomaterials in environmental and biological matrices through non-electron microscopic techniques

Engineered nanomaterials (ENs) can enter the environment, and accumulate in food chains, thereby causing environmental and health problems. Size characterization of ENs is critical for further evaluating the interactions among ENs in biological and ecological systems. Although electron microscope is a powerful tool in obtaining the size information, it has limitations when studying nanomaterials in complex matrices. In this review, we summarized non-electron microscope-based techniques, including chromatography-based, mass spectrometry-based, synchrotron radiation- and neutron-based techniques for detecting the size of ENs in environmental and biological matrices. The advantages and disadvantages of these techniques were highlighted. The perspectives on size characterization of ENs in complex matrices were also presented.

Impact of sp2 carbon material species on Pt nanoparticle-based electrocatalysts produced by one-pot pyrolysis methods with ionic liquids

Pt-nanoparticle-supported graphene nanoplatelets (Pt/GNPs) and multiwalled carbon nanotube composite (Pt/MWCNTs) electrocatalysts for the oxygen reduction reaction (ORR) can be prepared using a one-pot method through the pyrolytic decomposition of the platinum precursor, platinum(ii) bis(acetylacetonate) (Pt(acac)2) in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C4mim][Tf2N]) or N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)amide ([N1,1,1,3][Tf2N]) ionic liquids (ILs) with the target sp2 carbon support. In this one-pot pyrolysis method, which does not require any reagents to reduce Pt metal precursors or stabilize Pt nanoparticles, Pt nanoparticles are readily immobilized onto the sp2 surface by a thin IL layer formed at the interface, which can work as a binder. We used three types of sp2 carbon materials with different geometric shapes (graphene nanoplatelets with <3 (GNPs-3) and 18-24 layers (GNPs-20) and multiwalled carbon nanotubes (MWCNTs)) to investigate Pt nanoparticle formation and anchoring. All the electrocatalysts, especially Pt/MWCNTs, showed higher durability than the commercial catalyst owing to the combined effect of the IL binder and sp2 carbon materials. Our findings strongly suggest that the original carbon surface properties are also an important factor for creating high-performance ORR electrocatalysts.

Sustainable Synthesis of Ionic Liquid-Functionalized Zinc Oxide Nanosheets (IL@ZnO): Evaluation of Antibacterial Potential Activity for Biomedical Applications

Zinc oxide (ZnO)-derived materials exhibit unique antibacterial, antifungal, and photochemical activities and are widely used in antibacterial formulations. In this work, ZnO nanosheets were prepared by green and cost-effective synthesis via a hydrothermal method, and the prepared ZnO nanosheets were further functionalized with an eco-friendly ionic liquid (IL). Thus, a sustainable approach was established to synthesize ZnO nanosheets. The functionalization of ZnO with the synthesized IL was fully characterized by advanced spectroscopic and microscopic techniques. The prepared ionic liquid-functionalized ZnO (IL@ZnO) showed self-organized layered-sheet arrangements caused by the intercalation of the IL onto the surface of ZnO nanosheets as revealed by scanning electron microscopy (SEM). The design of the IL comprised a carboxylic acid moiety for functionalization onto the surface of ZnO, whereas the hydrophobicity was tuned through the incorporation of a long alkyl chain. The developed IL@ZnO material was also tested against both Gram-positive and Gram-negative pathogenic bacteria for potential antibacterial activity by colony-forming unit (CFU) and minimum inhibitory concentration tests. The results revealed that the IL@ZnO exhibits significant antibacterial activity against tested strains. In particular, potent activity was observed against the Gram-positive skin-specific Staphylococcus aureus bacteria strain. The mechanism of bactericidal activity against bacteria was also explored along with the cytotoxicity toward mammalian cells, which reveals that the IL@ZnO is nontoxic in nature. To utilize the developed material owing to its bactericidal activity for practical applications, the IL@ZnO was fabricated onto the surface of cotton fabric, and its surface morphology was examined by SEM; the activity of IL@ZnO-treated cotton fabric was evaluated by the zone of inhibition assay. Additionally, the IL@ZnO-treated cotton fabric exhibited remarkable stability along with significant hydrophobicity and breathability and thus can be utilized as a biomaterial for biomedical applications, especially in medical masks, for reducing the risk of transmission of infectious diseases.

Biological applications of green synthesized lanthanum oxide nanoparticles via Couroupita guianensis abul leaves extract

In this work, extract from leaves of Couroupita guianensis (C.guianensis) abul was used as a potential reducing agent for the synthesis of lanthanum oxide (La₂O₃) nanoparticles (NPs). In addition, the morphology and several physicochemical properties of the La₂O₃ NPs were improved by introducing the ionic liquid of 1-butyl 3-methyl imidazolium tetra fluoroborate (BMIM BF₄) as a stabilizing agent. The structure of the La₂O₃ (without ionic liquid) and IL-La₂O₃ (with ionic liquid) NPs were analyzed by X-ray diffraction (XRD). The chemical composition of the synthesized NPs was analyzed using the energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) studies. Optical and morphological studies were also performed. The antibacterial, antioxidant, anti-inflammatory, anti-diabetic and anticancer properties of the La₂O₃ and IL-La₂O₃ NPs were evaluated.

The Monte Carlo approach to model and predict the melting point of imidazolium ionic liquids using hybrid optimal descriptors

Ionic liquids (ILs) have captured intensive attention owing to their unique properties such as high thermal stability, negligible vapour pressure, high dissolution capacity and high ionic conductivity as well as their wide applications in various scientific fields including organic synthesis, catalysis, and industrial extraction processes. Many applications of ionic liquids (ILs) rely on the melting point (T_m). Therefore, in the present manuscript, the melting points of imidazolium ILs are studied employing a quantitative structure–property relationship (QSPR) approach to develop a model for predicting the melting points of a data set of imidazolium ILs. The Monte Carlo algorithm of CORAL software is applied to build up a robust QSPR model to calculate the values T_m of 353 imidazolium ILs. Using a combination of SMILES and hydrogen-suppressed molecular graphs (HSGs), the hybrid optimal descriptor is computed and used to generate the QSPR models. Internal and external validation parameters are also employed to evaluate the predictability and reliability of the QSPR model. Four splits are prepared from the dataset and each split is randomly distributed into four sets i.e. training set (≈33%), invisible training set (≈31%), calibration set (≈16%) and validation set (≈20%). In QSPR modelling, the numerical values of various statistical features of the validation sets such as R_Validation², Q_Validation², and IIC_Validation are found to be in the range of 0.7846–0.8535, 0.7687–0.8423 and 0.7424–0.8982, respectively. For mechanistic interpretation, the structural attributes which are responsible for the increase/decrease of T_m are also extracted.

The melting points of imidazolium ILs are studied employing a quantitative structure–property relationship (QSPR) approach to develop a model for predicting the melting points of a data set of imidazolium ILs.

Plasma-Induced Heating Effects on Platinum Nanoparticle Size During Sputter Deposition Synthesis in Polymer and Ionic Liquid Substrates

Nanoparticle catalyst materials are becoming ever more important in a sustainable future. Specifically, platinum (Pt) nanoparticles have relevance in catalysis, in particular, fuel cell technologies. Sputter deposition into liquid substrates has been shown to produce nanoparticles without the presence of air and other contaminants and the need for precursors. Here, we produce Pt nanoparticles in three imidazolium-based ionic liquids and PEG 600. All Pt nanoparticles are crystalline and around 2 nm in diameter. We show that while temperature has an effect on particle size for Pt, it is not as great as for other materials. Sputtering power, time, and postheat treatment all show slight influence on the particle size, indicating the importance of temperature during sputtering. The temperature of the liquid substrate is measured and reaches over 150 °C during deposition which is found to increase the particle size by less than 20%, which is small compared to the effect of temperature on Au nanoparticles presented in the literature. High temperatures during Pt sputtering are beneficial for increasing Pt nanoparticle size beyond 2 nm. Better temperature control would allow for more control over the particle size in the future.

On the Effects of Diluted and Mixed Ionic Liquids as Liquid Substrates for the Sputter Synthesis of Nanoparticles

The synthesis of nanoparticles by combinatorial sputtering in ionic liquids is a versatile approach for discovering new materials. Whereas the influence on nanoparticle formation of different pure ionic liquids has been addressed, the influence of (I) dilution of ionic liquid with solvents and (II) different mixtures of ionic liquids is less known. Therefore, mixtures of the ionic liquid [Bmim][(Tf)₂N] with the organic solvent anisole and other ionic liquids ([Bmim][(Pf)₂N], [BmPyr][(Tf)₂N]) were used as liquid substrates for the sputter synthesis of nanoparticles, in order to investigate the influence of these mixtures on the size of the nanoparticles. First, mixtures of anisole with a suspension of sputtered Ag nanoparticles in [Bmim][(Tf)₂N] were prepared in different volumetric steps to investigate if the stabilization of the NPs by the ionic liquid could be reduced by the solvent. However, a continuous reduction in nanoparticle size and amount with increasing anisole volume was observed. Second, Ag, Au and Cu were sputtered on ionic liquid mixtures. Ag nanoparticles in [Bmim][(Tf)₂N]/[Bmim][(Pf)₂N] mixtures showed a decrease in size with the increasing volumetric fraction of [Bmim][(Tf)₂N], whereas all nanoparticles obtained from [Bmim][(Tf)₂N]/[BmPyr][(Tf)₂N] mixtures showed increasing size and broadening of the size distribution. Maximum sizes of sputtered Ag and Au NPs were reached in mixtures of [Bmim][(Tf)₂N] with 20 vol.% and 40 vol.% [BmPyr][(Tf)₂N]. The results indicate that ionic liquid mixtures with different portions of cations and anions have the capability of influencing the ionic liquid stabilization characteristics with respect to, e.g., nanoparticle size and size distribution.

Ionic liquid-stabilized vanadium oxo-clusters catalyzing alkane oxidation by regulating oligovanadates

The specific ionic liquid [TBA][Pic]-stabilized vanadium oxo-clusters exist in the form of a trimer and a dimer and are highly active for catalyzing C–H bond oxidation with H₂O₂ as an oxidant.

Ionic Liquid Stabilized Niobium Oxoclusters Catalyzing Oxidation of Sulfides with Exceptional Activity

We present here a new class of niobium oxoclusters that are stabilized effectively by carboxylate ionic liquids. These functionalized ILs are designated as [TBA][LA], [TBA][PA], and [TBA][HPA] in this work, in which TBA represents tetrabutylammonium and LA, PA, and HPA refer to lactate, propionate, 3-hydroxypropionate anions, respectively. The as-synthesized Nb oxoclusters have been characterized by use of elemental analysis, NMR, IR, XRD, TGA, HRTEM. It was found that [TBA][LA]-stabilized Nb oxoclusters (Nb-OC@[TBA][LA]) are uniformly dispersed with an average particle size of 2-3 nm and afforded exceptionally high catalytic activity for the selective oxidation of various thioethers. The turnover number with Nb-OC@[TBA][LA] catalyst was over 56 000 at catalyst loading as low as 0.0033 mol % (1 ppm). Meantime, the catalyst also showed the high activity for the epoxidation of olefins and allylic alcohols by using only 0.065 mol % of catalyst (50 ppm). The characterization of ⁹³ Nb NMR spectra revealed that the Nb oxoclusters underwent structural transformation in the presence of H₂ O₂ but regenerated to their initial state at the end of the reaction. In particular, the highly dispersed Nb oxoclusters can absorb a large amount of polar organic solvents and thus were swollen greatly, which exhibited "pseudo" liquid phase behavior, and enabled the substrate molecules to be highly accessible to the catalytic center of Nb oxocluster units.

Extended hierarchical solvent perturbations from curved surfaces of mesoporous silica particles in a deep eutectic solvent

HYPOTHESIS

Many applications of deep eutectic solvents (DES) rely on exploitation of their unique yet complex liquid structures. Due to the ionic nature of the DES components, their diffuse structures are perturbed in the presence of a charged surface. We hypothesize that it is possible to perturb the bulk DES structure far (>100 nm) from a curved, charged surface with mesoscopic dimensions.

EXPERIMENTS

We performed in situ, synchrotron-based ultra-small angle X-ray scattering (USAXS) experiments to study the solvent distribution near the surface of charged mesoporous silica particles (MPS) (≈0.5 µm in diameter) suspended in both water and a common type of DES (1:2 choline Cl-:ethylene glycol).

FINDINGS

A careful USAXS analysis reveals that the perturbation of electron density distribution within the DES extends ≈1 μm beyond the particle surface, and that this perturbation can be manipulated by the addition of salt ions (AgCl). The concentration of the pore-filling fluid is greatly reduced in the DES. Notably, we extracted the real-space structures of these fluctuations from the USAXS data using a simulated annealing approach that does not require a priori knowledge about the scattering form factor, and can be generalized to a wide range of complex small-angle scattering problems.

Zinc Oxide Nanoparticles Dispersed in Ionic Liquids Show High Antimicrobial Efficacy to Skin-Specific Bacteria

Zinc oxide (ZnO) nanoparticles have been shown in the literature to have antibacterial properties and have been widely used in antibacterial formulations. However, one of the problems with ZnO nanoparticles is their tendency to aggregate, thereby causing damage to normal cells and lowering their antibacterial efficacy during application. In this work, we have attempted to avoid this by using a combination of ZnO nanoparticles and ionic liquids, a class of low melting salts containing organic cations and organic/inorganic anions that show antibacterial property as well, and tested the antibacterial activity of this dispersion. ZnO nanoparticles of 60 nm were dispersed in two different ionic liquids-choline acetate (IL1) and 1-butyl-3-methylimidazolium chloride (IL2)-to achieve high dispersibility, whereas ZnO dispersed in phosphate-buffered saline was taken as a control. These dispersions were tested on four strains- Escherichia coli, Bacillus subtilis, Klebsiella pneumoniae, and Staphylococcus epidermidis. Maximum efficiency was obtained for ZnO nanoparticles dispersed in imidazolium-based ionic liquids against skin-specific S. epidermidis. Skin infections induced by S. epidermidis are prevalent in hospital-acquired diseases. In most cases, traditional antibiotic-based therapies fail to combat such infections. Our strategy of developing a dispersion of ZnO nanoparticles in ionic liquids shows superior antibacterial efficacy in comparison to that shown individually by ZnO nanoparticles or ionic liquids. We have also established that the mechanism of killing this skin-specific bacterium is possibly through the production of reactive oxygen species leading to bacterial cell lysis. Further, we showed that this formulation is biocompatible and nontoxic to normal keratinocyte cells even under coculture conditions.

Ionic Liquid Microstrips Impregnated with Magnetic Nanostirrers for Sensitive Gas Sensors

Ionic liquids (IL) have been regarded as promising electrolytes as substitutes for volatile aqueous or organic solvents for electrochemical gas sensors. However, ILs are viscous, and the slow diffusion of gas molecules leads to poor sensitivity and sluggish response times. Herein, we describe a strategy using an array of microstrips of IL containing magnetic nanoparticles as nanostirrers for enhanced mass transport and gas sensing. Magnetic CoFe₂O₄ nanoparticles are synthesized and dispersed in a hydrophobic IL [BMP][Ntf₂]. First, the convection effect of the IL dispersion was studied using the reversible redox couple ferrocene/ferrocenium ion. In a rotating magnetic field, steady-state currents for oxidation of dissolved ferrocene are three to five times greater than that in an unstirred solution. Then, the IL dispersion is micropatterned onto a gold electrode using microcontact printing. A self-assembled monolayer was printed onto a gold surface creating 70 μm wide hydrophobic lines with a 30 μm gap between them. Upon applying the IL dispersion into the gap, a 30 μm wide array of microstrips was successfully fabricated. The system is demonstrated as an oxygen sensor in the range of volume fraction of O₂ of 50-500 ppm giving a linear calibration with a sensitivity of 1.94 nA cm^-2 ppm^-1.

Confined naked gold nanoparticles in ionic liquid films

Surface-clean Au nanoparticles (NPs) confined in films of ionic liquids (ILs) can be easily fabricated by sputtering deposition. A silicon wafer coated with films of both hydrophobic (bis((trifluoromethyl)sulfonyl)amide, NTf₂^-) and hydrophilic (tetrafluoroborate, BF₄^-) imidazolium-based ILs forms an 'ionic carpet-like' structure that can be easily decorated with Au NPs of 5.1 and 6.5 nm mean diameter, respectively. The depth profile distribution of the Au NPs depends on the arrangement of the IL, which is controlled mainly by the anion volume. Higher concentrations of Au NPs are found closer to the IL surface for the system containing a larger anion (NTf₂) whereas Au NPs are located deeper in the IL for the system containing a smaller anion (BF₄). The Au NPs are well distributed over the IL/Si support and are strictly confined in a single layer of the IL. This method is among the most simple and versatile for the generation of liquid layers containing surface-clean, stable and confined Au NPs.

Metal Nanoparticles in Ionic Liquids

During the last years ionic liquids (ILs) were increasingly used and investigated as reaction media, hydrogen sources, catalysts, templating agents and stabilizers for the synthesis of (monometallic and bimetallic) metal nanoparticles (M-NPs). Especially ILs with 1,3-dialkyl-imidazolium cations featured prominently in the formation and stabilization of M-NPs. This chapter summarizes studies which focused on the interdependencies of the IL with the metal nanoparticle and tried to elucidate, for example, influences of the IL-cation, -anion and alkyl chain length. Qualitatively, the size of M-NPs was found to increase with the size of the IL-anion. The influence of the size of imidazolium-cation is less clear. The M-NP size was both found to increase and to decrease with increasing chain lengths of the 1,3-dialkyl-imidazolium cation. It is evident from such reports on cation and anion effects of ILs that the interaction between an IL and a (growing) metal nanoparticle is far from understood. Factors like IL-viscosity, hydrogen-bonding capability and the relative ratio of polar and non-polar domains of ILs may also influence the stability of nanoparticles in ionic liquids and an improved understanding of the IL-nanoparticle interaction would be needed for a more rational design of nanomaterials in ILs. Furthermore, thiol-, ether-, carboxylic acid-, amino- and hydroxyl-functionalized ILs add to the complexity by acting also as coordinating capping ligands. In addition imidazolium cations are precursors to N-heterocyclic carbenes, NHCs which form from imidazolium-based ionic liquids by in situ deprotonation at the acidic C2-H ring position as intermediate species during the nanoparticle seeding and growth process or as surface coordinating ligand for the stabilization of the metal nanoparticle.

Ionic liquid and nanoparticle hybrid systems: Emerging applications

Having novel electronic and optical properties that emanate from their nano-scale dimensions, nanoparticles are central to numerous applications. Ionic liquids can confer to nanoparticle chemical protection and physicochemical property enhancement through intermolecular interactions and can consequently improve the stability and reusability of nanoparticle for various operations. With an aim to combine the novel properties of nanoparticles and ionic liquids, different structures have been generated, based on a balance of several intermolecular interactions. Such ionic liquid and nanoparticle hybrids are showing great potential in diverse applications. In this review, we first introduce various types of ionic liquid and nanoparticle hybrids, including nanoparticle colloidal dispersions in ionic liquids, ionic liquid-grafted nanoparticles, and nanoparticle-stabilized ionic liquid-based emulsions. Such hybrid materials exhibit interesting synergisms. We then highlight representative applications of ionic liquid and nanoparticle hybrids in the catalysis, electrochemistry and separations fields. Such hybrids can attain better stability and higher efficiency under a broad range of conditions. Novel and enhanced performance can be achieved in these applications by combining desired properties of ionic liquids and of nanoparticles within an appropriate hybrid nanostructure.

Theoretical insights into the interaction between RunPt13-n (n=4, 7 and 9) clusters and [BMIM]+ based ionic liquids: Effect of anion

Density functional theory has been performed to systematically study the interactions between Ru_nPt_13-n (n=4, 7 and 9) clusters and [BMIM]⁺ based ionic liquids. Ionic liquids [BMIM][Br], [BMIM][BF₄], [BMIM][PF₆], [BMIM][CF₃SO₃], and [BMIM][NTf₂] have different effects on the stability of Ru₇Pt₆. Ionic liquids with median size anions of PF₆^- and CF₃SO₃^- can better improve the stability of Ru₇Pt₆ than those with the small anions of Br^- and BF₄^- and large anion of NTf₂^-. Based on negative relaxation energies, the stabilities of Ru₄Pt₉, Ru₇Pt₆, and Ru₉Pt₄ are all enhanced after interacting with [BMIM][CF₃SO₃]. The stability enhanced degree is in agreement with the interaction strength. For Ru₇Pt₆-n{[BMIM][CF₃SO₃]} (n=1, 2, 3, 4), the interaction between ionic liquid and cluster plays the primary role in stabilizing the cluster in Ru₇Pt₆-[BMIM][CF₃SO₃]. With the increase of the number of [BMIM][CF₃SO₃], the role of the interaction in stabilizing the cluster is getting weaker, while the role of steric protection is getting more important.

In-Situ XPS Monitoring and Characterization of Electrochemically Prepared Au Nanoparticles in an Ionic Liquid

Gold nanoparticles (Au NPs) have been electrochemically prepared in situ and in vacuo using two different electrochemical device configurations, containing an ionic liquid (IL), N-N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide, that serves both as reaction and as stabilizing media for the NPs. It was observed in both devices that Au NPs were created using an anodically triggered route. The created Au NPs are relatively small (3-7 nm) and reside within the IL medium. X-ray photoelectron spectroscopy is utilized to follow not only the formation of the NPs but also their charging/discharging properties, by monitoring the charging shifts of the Au4f peak representing the electrodes and also the Au NPs as well as the F1s peak of the IL after polarizing one of the electrodes. Accordingly, DC polarization across the electrodes leads to a uniform binding energy shift of F1s of the IL along with that of Au4f of the NPs within. Moreover, this shift corresponds to only half of the applied potential. AC polarization brings out another dimension for demonstrating further the harmony between the charging/discharging property of the IL medium and the Au NPs in temporally and laterally resolved fashions. Polarization of the electrodes result in perfect spectral separation of the Au4f peaks of the NPs from those of the metal in both static (DC) and in time- and position-dependent (AC) modes.

Anion and cation effects on the size control of Au nanoparticles prepared by sputter deposition in imidazolium-based ionic liquids

The sputter deposition of metals in an ionic liquid (IL) capture medium is a simple and elegant method for preparing nanoparticles without any chemical reaction. Although there have been some reports on the size determination factors for Au nanoparticles (AuNPs) prepared using this method, the effects with respect to the type of IL used have not been clearly elucidated. This is because there are some complicating factors, some of which have been revealed by our previous systematic studies. In the present study, we prepare AuNPs in nine types of imidazolium-based IL to examine the size determination effects of the type of anion involved, the length of the alkyl chain of the cation, and the preparation temperature for each IL, while keeping other factors constant. For most of the capture media ILs, the sizes of the AuNPs increase with an increase in temperature. The AuNPs prepared in ILs containing different types of anions exhibit distinctly different particle sizes and temperature dependences. Conversely, the alkyl chain is regarded as a secondary stabilizer that works only at higher preparation temperatures. We conclude that the sizes of AuNPs prepared by this method may be determined by the competition between the collision frequency of the ejected Au atoms and the stabilizing capability of the anions that form the first coordination shell around the AuNPs. The AuNP sizes are closely related to the volume of anions.

Ionic liquids for nano- and microstructures preparation. Part 1: Properties and multifunctional role

Ionic liquids (ILs) are a broad group of organic salts of varying structure and properties, used in energy conversion and storage, chemical analysis, separation processes, as well as in the preparation of particles in nano- and microscale. In material engineering, ionic liquids are applied to synthesize mainly metal nanoparticles and 3D semiconductor microparticles. They could generally serve as a structuring agent or as a reaction medium (solvent). This review deals with the resent progress in general understanding of the ILs role in particle growth and stabilization and the application of ionic liquids for nano- and microparticles synthesis. The first part of the paper is focused on the interactions between ionic liquids and growing particles. The stabilization of growing particles by steric hindrance, electrostatic interaction, solvation forces, viscous stabilization, and ability of ILs to serve as a soft template is detailed discussed. For the first time, the miscellaneous role of the ILs in nano- and microparticle preparation composed of metals as well as semiconductors is collected, and the formation mechanisms are graphically presented and discussed based on their structure and selected properties. The second part of the paper gives a comprehensive overview of recent experimental studies dealing with the applications of ionic liquids for preparation of metal and semiconductor-based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids are presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting, and microwave or ultrasound-mediated methods.

Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis

Ionic liquids (ILs) are widely applied to prepare metal nanoparticles and 3D semiconductor microparticles. Generally, they serve as a structuring agent or reaction medium (solvent), however it was also demonstrated that ILs can play a role of a co-solvent, metal precursor, reducing as well as surface modifying agent. The crucial role and possible types of interactions between ILs and growing particles have been presented in the Part 1 of this review paper. Part 2 of the paper gives a comprehensive overview of recent experimental studies dealing with application of ionic liquids for preparation of metal and semiconductor based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids is presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting and ray-mediated methods (microwave, ultrasound, UV-radiation and γ-radiation). It was found that ionic liquids formed of a 1-butyl-3-methylimidazolium [BMIM] combined with tetrafluoroborate [BF4], hexafluorophosphate [PF6], and bis(trifluoromethanesulfonyl)imide [Tf2N] are the most often used ILs in the synthesis of nano- and microparticles, due to their low melting temperature, low viscosity and good transportation properties. Nevertheless, examples of other IL classes with intrinsic nanoparticles stabilizing abilities such as phosphonium and ammonium derivatives are also presented. Experimental data revealed that structure of ILs (both anion and cation type) affects the size and shape of formed metal particles, and in some cases may even determine possibility of particles formation. The nature of the metal precursor determines its affinity to polar or nonpolar domains of ionic liquid, and therefore, the size of the nanoparticles depends on the size of these regions. Ability of ionic liquids to form varied extended interactions with particle precursor as well as other compounds presented in the reaction media (water, organic solvents etc.) provides nano- and microstructures with different morphologies (0D nanoparticles, 1D nanowires, rods, 2D layers, sheets, and 3D features of molecules). ILs interact efficiently with microwave irradiation, thus even small amount of IL can be employed to increase the dielectric constant of nonpolar solvents used in the synthesis. Thus, combining the advantages of ionic liquids and ray-mediated methods resulted in the development of new ionic liquid-assisted synthesis routes. One of the recently proposed approaches of semiconductor particles preparation is based on the adsorption of semiconductor precursor molecules at the surface of micelles built of ionic liquid molecules playing a role of a soft template for growing microparticles.

Efficient palladium and ruthenium nanocatalysts stabilized by phosphine functionalized ionic liquid for selective hydrogenation

Palladium and ruthenium nanoparticles stabilized by novel phosphine functionalized ionic liquid are originally utilized as efficient catalysts for excellent chemoselective hydrogenation.

Nanoparticles in ionic liquids: interactions and organization

Interactions between nanoparticles and ionic liquids can lead to a variety of organized structures.