Consistency in the Sum Frequency Generation Intensity and Phase Vibrational Spectra of the Air/Neat Water Interface

Quantitative Signal Analysis of Sum-Frequency Scattering Experiments from Aerosol Surfaces

Droplet interfaces are instrumental in processes of biology, engineering, production, and environmental systems. The chemical and physical properties of heterogeneous interfaces are known to be different from those of their underlying bulk phases, and different again when considering the curved surface of submicron aerosol droplets. The recently developed technique of vibrational sum-frequency scattering (VSFS) spectroscopy from airborne particles has emerged as an interface-specific method for the in situ analysis of this unique system. While the technique has shown promise in debut works, a quantitative analysis of the VSFS system has not yet been performed. Here we provide a comprehensive analysis of a VSFS spectrometer with reference to the well-documented planar analog. We decompose the VSFS signal into coherent and incoherent as well as resonant and nonresonant components as a function of incident pulse delay time. We then quantify and compare resonant and nonresonant VSFS and VSFG experimental data using the same laser and detection systems. Using the air/water interface as a guide, we show that the resonant and nonresonant contributions to the SF responses are comparable for the two systems by extracting second-order susceptibilities and hyperpolarizabilities, and using them to estimate single-particle susceptibilities. A quantitative analysis of the signal detection systems for the scattering and planar geometries is made, and conversion efficiencies for VSFG, VSFS, and other nonlinear scattering experiments are compared. Lastly, the possibility of a low-repetition (1 kHz) VSFS spectrometer is considered, determining that it may be possible with modern laser technology but is inevitably less efficient than a high-repetition (100 kHz) system. Though this multistep analysis we obtain a better understanding of the components of the VSFS signal from aerosol particles, further validate the feasibility of the experiments, and provide insight to those wishing to conduct similar experiments and how they may be improved.

Sum rule comparison of narrowband and broadband sum frequency generation spectra and comparison with theory

Earlier sum frequency generation (SFG) experiments involve one infrared and one visible laser, and a measurement of the intensity of the response, yielding data on the surface sensitive properties of the sample. Recently, both the real and imaginary components of the susceptibility were measured in two different sets of experiments. In one set, a broadband infrared laser was used, permitting observations at very short times, while in another set the infrared laser was narrowband, permitting higher spectral resolution. The differences in the spectrum obtained by the two will be most evident in studying narrow absorption bands, e.g., the band due to dangling OH bonds at a water interface. The direct comparisons in the integrated amplitude (sum rule) of the imaginary part of the dangling OH bond region differ by a factor of 3. Due to variations in experimental setup and data processing, corrections were made for the quartz reference, Fresnel factors, and the incident visible laser wavelength. After the corrections, the agreement differs now by the factors of 1.1 within broadband and narrowband groups and the two groups now differ by a factor of 1.5. The 1.5 factor may arise from the extra heating of the more powerful broadband laser system on the water surface. The convolution from the narrowband SFG spectrum to the broadband SFG spectrum is also investigated and it does not affect the sum rule. Theory and narrowband experiments are compared using the sum rule and agree to a factor of 1.3 with no adjustable parameters.

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br- counterions compared to smaller Na+ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H+ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H+ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.

On the Fresnel factor correction of sum-frequency generation spectra of interfacial water

Insights into the microscopic structure of aqueous interfaces are essential for understanding the chemical and physical processes on the water surface, including chemical synthesis, atmospheric chemistry, and events in biomolecular systems. These aqueous interfaces have been probed by heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy. To obtain the molecular response from the measured HD-SFG spectra, one needs to correct the measured ssp spectra for local electromagnetic field effects at the interface due to a spatially varying dielectric function. This so-called Fresnel factor correction can change the inferred response substantially, and different ways of performing this correction lead to different conclusions about the interfacial water response. Here, we compare the simulated and experimental spectra at the air/water interface. We use three previously developed models to compare the experiment with theory: an advanced approach taking into account the detailed inhomogeneous interfacial dielectric profile and the Lorentz and slab models to approximate the interfacial dielectric function. Using the advanced model, we obtain an excellent quantitative agreement between theory and experiment, in both spectral shape and amplitude. Remarkably, we find that for the Fresnel factor correction of the ssp spectra, the Lorentz model for the interfacial dielectric function is equally accurate in the hydrogen (H)-bonded region of the response, while the slab model underestimates this response significantly. The Lorentz model, thus, provides a straightforward method to obtain the molecular response from the measured spectra of aqueous interfaces in the H-bonded region.

The Solvation-Induced Onsager Reaction Field Rather than the Double-Layer Field Controls CO2 Reduction on Gold

The selectivity and activity of the carbon dioxide reduction (CO₂R) reaction are sensitive functions of the electrolyte cation. By measuring the vibrational Stark shift of in situ-generated CO on Au in the presence of alkali cations, we quantify the total electric field present at catalytic active sites and deconvolute this field into contributions from (1) the electrochemical Stern layer and (2) the Onsager (or solvation-induced) reaction field. Contrary to recent theoretical reports, the CO₂R kinetics does not depend on the Stern field but instead is closely correlated with the strength of the Onsager reaction field. These results show that in the presence of adsorbed (bent) CO₂, the Onsager field greatly exceeds the Stern field and is primarily responsible for CO₂ activation. Additional measurements of the cation-dependent water spectra using vibrational sum frequency generation spectroscopy show that interfacial solvation strongly influences the CO₂R activity. These combined results confirm that the cation-dependent interfacial water structure and its associated electric field must be explicitly considered for accurate understanding of CO₂R reaction kinetics.

Progress in phase-sensitive sum frequency generation spectroscopy

Sum frequency generation (SFG) spectroscopy is a unique and powerful tool for investigating surfaces and interfaces at the molecular level. Phase-sensitive SFG (PS-SFG) is an upgraded technique that can overcome the inherent drawbacks of conventional SFG. Here we review several methods of PS-SFG developed and reported in 1990-2020. We introduce how and by which group each PS-SFG method was designed and built in terms of interferometer implementation for optical heterodyne detection, with one exception of a recent numerical method that does not rely on interferometry. We also discuss how PS-SFG solved some typical problems for aqueous interfaces that were once left open by conventional SFG. These problems and their solutions are good examples to demonstrate why PS-SFG is essential. In addition, we briefly note a few terminology issues related with PS-SFG to avoid confusion.

Probing the Mineral-Water Interface with Nonlinear Optical Spectroscopy

The interaction between minerals and water is manifold and complex: the mineral surface can be (de)protonated by water, thereby changing its charge; mineral ions dissolved into the aqueous phase screen the surface charges. Both factors affect the interaction with water. Intrinsically molecular-level processes and interactions govern macroscopic phenomena, such as flow-induced dissolution, wetting, and charging. This realization is increasingly prompting molecular-level studies of mineral-water interfaces. Here, we provide an overview of recent developments in surface-specific nonlinear spectroscopy techniques such as sum frequency and second harmonic generation (SFG/SHG), which can provide information about the molecular arrangement of the first few layers of water molecules at the mineral surface. The results illustrate the subtleties of both chemical and physical interactions between water and the mineral as well as the critical role of mineral dissolution and other ions in solution for determining those interactions.

The pH-dependent orientation of N3 dye on a gold substrate is revealed using heterodyne-detected vibrational sum frequency generation spectroscopy

We report on systematic changes to the adsorption geometry of the dye N3 {[cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato ruthenium(II)]} on a gold substrate as the pH of the deposition environment is altered. The protonation states of the four -COOH groups of the N3 dye change according to the modified pH conditions, thus affecting the number of -COOH and -NCS functional groups that participate in the adsorption to gold. Here, we use heterodyne detected vibrational sum frequency generation (HD-VSFG) spectroscopy to obtain surface specific vibrational information on both -COOH and -NCS groups as a function of pH of the deposition conditions. Polarization-dependent HD-VSFG yields sets of complex χ⁽²⁾ spectra, enabling us to perform a simultaneous fitting procedure to the polarization-dependent real and imaginary components and thus extract detailed structural information of the N3/gold interface. Our results show that N3 preferentially adsorbs to gold either with two -COOH groups and one -NCS group in more acidic conditions or with one -COOH group and two -NCS groups in more basic conditions.

Quantifying the Counterion-Specific Effect on Surfactant Adsorption Using Modeling, Simulation, and Experiments

Ionic surfactants behave differently in the presence of various counterions, which plays an important role in many scientific and engineering processes. Previous work has shown that the counterion-specific surface tension can be reproduced with classical adsorption models, but the underlying origin of this effect has not been explained. In this paper, we extend our previously developed adsorption model to account for the specific counterion adsorption. This model can accurately predict the surface tension of surfactant solutions like sodium dodecyl sulfate (SDS) in the presence of the monovalent salts LiCl, NaCl, KCl, and CsCl. The predicted surface excess and surface potential are validated by corresponding sum-frequency generation (SFG) spectroscopy experiments. We also used molecular dynamic (MD) simulation to explain the origin of the counterion-specific effect for surfactant behavior. Our study shows that for SDS, binding of the counterion to both the headgroup and a few CH₂ fragments close to the surfactant head contributes to the counterion-specific effect. In general, SDS behaves like a large ion, and it prefers to bind with large counterions such as Cs⁺, which is consistent with Collins's law of matching water affinity. Therefore, large counterions enhance the surface adsorption and lower the surface tension the most.

Molecular Structure and Modeling of Water-Air and Ice-Air Interfaces Monitored by Sum-Frequency Generation

From a glass of water to glaciers in Antarctica, water-air and ice-air interfaces are abundant on Earth. Molecular-level structure and dynamics at these interfaces are key for understanding many chemical/physical/atmospheric processes including the slipperiness of ice surfaces, the surface tension of water, and evaporation/sublimation of water. Sum-frequency generation (SFG) spectroscopy is a powerful tool to probe the molecular-level structure of these interfaces because SFG can specifically probe the topmost interfacial water molecules separately from the bulk and is sensitive to molecular conformation. Nevertheless, experimental SFG has several limitations. For example, SFG cannot provide information on the depth of the interface and how the orientation of the molecules varies with distance from the surface. By combining the SFG spectroscopy with simulation techniques, one can directly compare the experimental data with the simulated SFG spectra, allowing us to unveil the molecular-level structure of water-air and ice-air interfaces. Here, we present an overview of the different simulation protocols available for SFG spectra calculations. We systematically compare the SFG spectra computed with different approaches, revealing the advantages and disadvantages of the different methods. Furthermore, we account for the findings through combined SFG experiments and simulations and provide future challenges for SFG experiments and simulations at different aqueous interfaces.

Sum frequency generation, calculation of absolute intensities, comparison with experiments, and two-field relaxation-based derivation

The experimental sum frequency generation (SFG) spectrum is the response to an infrared pulse and a visible pulse and is a highly surface-sensitive technique. We treat the surface dangling OH bonds at the air/water interface and focus on the absolute SFG intensities for the resonant terms, a focus that permits insight into the consequences of some approximations. For the polarization combinations, the calculated linewidths for the water interface dangling OH SFG band at 3,700 [Formula: see text] are, as usual, too large, because of the customary neglect of motional narrowing. The integrated spectrum is used to circumvent this problem and justified here using a Kubo-like formalism and theoretical integrated band intensities rather than peak intensities. Only relative SFG intensities are usually reported. The absolute integrated SFG intensities for three polarization combinations for sum frequency, visible, and infrared beams are computed. We use molecular dynamics and the dipole and the polarizability matrix elements obtained from infrared and Raman studies of [Formula: see text]O vapor. The theoretical expressions for two of the absolute susceptibilities contain only a single term and agree with experiment to about a factor of 1.3, with no adjustable parameters. The Fresnel factors are included in that comparison. One of the susceptibilities contains instead four positive and negative terms and agrees less well. The expression for the SFG correlation function is normally derived from a statistical mechanical formulation using a time-evolving density matrix. We show how a derivation based on a two-field relaxation leads to the same final result.

Adsorption of ionic surfactants at the air-water interface: The gap between theory and experiment

We review the experimental and theoretical results for the adsorption and structure of ionic surfactants at the air-liquid interface. The results show that ionic surfactants form thick adsorption layers at the interfacial region. We also review several adsorption models for ionic surfactants, which become increasingly complex as they capture the many features of adsorption layers. However, the adsorption layer structures determined by experiments and the structures predicted by models do not match because most models assume very thin adsorption layers. We show the discrepancies between measured and predicted surface properties and provide several explanations. We conclude that the mismatch in the adsorption layer structure provided by experiments and the structure provided by adsorption models is the main reason for the discrepancies in the surface excess and the surface potential.

Vibrational sum-frequency generation spectroscopy of electrode surfaces: studying the mechanisms of sustainable fuel generation and utilisation

The electrocatalytic oxidation of water coupled to the reduction of carbon dioxide, to make carbon based products, or the reduction of protons to provide hydrogen, offers a sustainable route to generating useful fuels.

Model Behavior: Characterization of Hydroxyacetone at the Air-Water Interface Using Experimental and Computational Vibrational Sum Frequency Spectroscopy

Small atmospheric aldehydes and ketones are known to play a significant role in the formation of secondary organic aerosols (SOA). However, many of them are difficult to experimentally isolate, as they tend to form hydration and oligomer species. Hydroxyacetone (HA) is unusual in this class as it contributes to SOA while existing predominantly in its unhydrated monomeric form. This allows HA to serve as a valuable model system for similar secondary organic carbonyls. In this paper the surface behavior of HA at the air-water interface has been investigated using vibrational sum frequency (VSF) spectroscopy and Wilhelmy plate surface tensiometry in combination with computational molecular dynamics simulations and density functional theory calculations. The experimental results demonstrate that HA has a high degree of surface activity and is ordered at the interface. Furthermore, oriented water is observed at the interface, even at high HA concentrations. Spectral features also reveal the presence of both cis and trans HA conformers at the interface, in differing orientations. Molecular dynamics results indicate conformer dependent shifts in HA orientation between the subsurface (∼5 Å deep) and surface. Together, these results provide a picture of a highly dynamic, but statistically ordered, interface composed of multiple HA conformers with solvated water. These results have implications for HA's behavior in aqueous particles, which may affect its role in the atmosphere and SOA formation.

The interfacial structure of water droplets in a hydrophobic liquid

Nanoscopic and microscopic water droplets and ice crystals embedded in liquid hydrophobic surroundings are key components of aerosols, rocks, oil fields and the human body. The chemical properties of such droplets critically depend on the interfacial structure of the water droplet. Here we report the surface structure of 200 nm-sized water droplets in mixtures of hydrophobic oils and surfactants as obtained from vibrational sum frequency scattering measurements. The interface of a water droplet shows significantly stronger hydrogen bonds than the air/water or hexane/water interface and previously reported planar liquid hydrophobic/water interfaces at room temperature. The observed spectral difference is similar to that of a planar air/water surface at a temperature that is ∼50 K lower. Supercooling the droplets to 263 K does not change the surface structure. Below the homogeneous ice nucleation temperature, a single vibrational mode is present with a similar mean hydrogen-bond strength as for a planar ice/air interface.

Vibrational Coupling at the Topmost Surface of Water Revealed by Heterodyne-Detected Sum Frequency Generation Spectroscopy

Unraveling vibrational coupling is the key to consistently interpret vibrational spectra of complex molecular systems. The vibrational spectrum of the water surface heavily suffers from vibrational coupling, which hinders complete understanding of the molecular structure and dynamics of the water surface. Here we apply heterodyne-detected sum frequency generation spectroscopy to the water surface and accomplish the assignment of a weak vibrational band located at the lower energy side of the free OH stretch. We find that this band is due to a combination mode of the hydrogen-bonded OH stretch and a low-frequency intermolecular vibration, and this combination band appears in the surface vibrational spectrum through anharmonic vibrational coupling that takes place exclusively at the topmost surface.

Both Inter- and Intramolecular Coupling of O-H Groups Determine the Vibrational Response of the Water/Air Interface

Vibrational coupling is relevant not only for dissipation of excess energy after chemical reactions but also for elucidating molecular structure and dynamics. It is particularly important for O-H stretch vibrational spectra of water, for which it is known that in bulk both intra- and intermolecular coupling alter the intensity and line shape of the spectra. In contrast with bulk, the unified picture of the inter/intra-molecular coupling of O-H groups at the water-air interface has been lacking. Here, combining sum-frequency generation experiments and simulation for isotopically diluted water and alcohols, we unveil effects of inter- and intramolecular coupling on the vibrational spectra of interfacial water. Our results show that both inter- and intramolecular coupling contribute to the O-H stretch vibrational response of the neat H₂O surface, with intramolecular coupling generating a double-peak feature, while the intermolecular coupling induces a significant red shift in the O-H stretch response.

Efficient Spectral Diffusion at the Air/Water Interface Revealed by Femtosecond Time-Resolved Heterodyne-Detected Vibrational Sum Frequency Generation Spectroscopy

Femtosecond vibrational dynamics at the air/water interface is investigated by time-resolved heterodyne-detected vibrational sum frequency generation (TR-HD-VSFG) spectroscopy and molecular dynamics (MD) simulation. The low- and high-frequency sides of the hydrogen-bonded (HB) OH stretch band at the interface are selectively excited with special attention to the bandwidth and energy of the pump pulses. Narrow bleach is observed immediately after excitation of the high-frequency side of the HB OH band at ∼3500 cm(-1), compared to the broad bleach observed with excitation of the low-frequency side at ∼3300 cm(-1). However, the time-resolved spectra observed with the two different excitations become very similar at 0.5 ps and almost indistinguishable by 1.0 ps. This reveals that efficient spectral diffusion occurs regardless of the difference of the pump frequency. The experimental observations are well-reproduced by complementary MD simulation. There is no experimental and theoretical evidence that supports extraordinary slow dynamics in the high-frequency side of the HB OH band, which was reported before.

Multimodal Broadband Vibrational Sum Frequency Generation (MM-BB-V-SFG) Spectrometer and Microscope

A broadband sum frequency generation (BB-SFG) spectrometer with multimodal (MM) capabilities was constructed, which could be routinely reconfigured for tabletop experiments in reflection, transmission, and total internal reflection (TIR) geometries, as well as microscopic imaging. The system was constructed using a Ti:sapphire amplifier (800 nm, pulse width = 85 fs, repetition rate = 2 kHz), an optical parameter amplification (OPA) system for production of broadband IR pulses tunable between 1000 and 4000 cm(-1), and two Fabry-Pérot etalons arranged in series for production of narrowband 800 nm pulses. The key feature allowing the MM operation was the nearly collinear alignment of the visible (fixed, 800 nm) and infrared (tunable, 1000-4000 cm(-1)) pulses which were spatially separated. Physical insights discussed in this paper include the comparison of spectral bandwidth produced with 40 and 85 fs pump beams, the improvement of spectral resolution using etalons, the SFG probe volume in bulk analysis, the normalization of SFG signals, the stitching of multiple spectral segments, and the operation in different modes for air/liquid and adsorbate/solid interfaces, bulk samples, as well as spectral imaging combined with principle component analysis (PCA). The SFG spectral features obtained with the MM-BB-SFG system were compared with those obtained with picosecond-scanning-SFG system and high-resolution BB-SFG system (HR-BB-SFG) for dimethyl sulfoxide, α-pinene, and various samples containing cellulose (purified commercial products, Cladophora cell wall, cotton and flax fibers, and onion epidermis cell wall).

Validation of Spectra and Phase in Sub-1 cm(-1) Resolution Sum-Frequency Generation Vibrational Spectroscopy through Internal Heterodyne Phase-Resolved Measurement

Reliable determination of the spectral features and their phases in sum-frequency generation vibrational spectroscopy (SFG-VS) for surfaces with closely overlapping peaks has been a standing issue. Here we present two approaches toward resolving such issue. The first utilizes the high-resolution and accurate line shape from the recently developed subwavenumber high-resolution broadband SFG-VS (HR-BB-SFG-VS), from which the detail spectral parameters, including relative spectral phases, of overlapping peaks can be determined through reliable spectral fitting. These results are further validated by using the second method that utilizes the azimuthal angle phase dependence of the z-cut α-quartz crystal, a common phase standard, through the spectral interference between the SFG fields of the quartz surface, as the internal phase reference, and the adsorbed molecular layer. Even though this approach is limited to molecular layers that can be transferred or deposited onto the quartz surface, it is simple and straightforward, as it requires only an internal phase standard with a single measurement that is free of phase drifts. More importantly, it provides unambiguous SFG spectral phase information on such surfaces. Using this method, the absolute phase of the molecular susceptibility tensors of the CH3, CH2, and chiral C-H groups in different Langmuir-Blodgett (LB) molecular monolayers and drop-cast peptide films are determined. These two approaches are fully consistent with and complement to each other, making both easily applicable tools in SFG-VS studies. More importantly, because the HR-BB-SFG-VS technique can be easily applied to various surfaces and interfaces, such validation of the spectral and phase information from HR-BB-SFG-VS measurement demonstrates it as one of the most promising tools for interrogating the detailed structure and interactions of complex molecular interfaces.

A means to an interface: investigating monoethanolamine behavior at an aqueous surface

The use of amine scrubbers to trap carbon dioxide from flue gas streams is one of the most promising avenues for atmospheric carbon dioxide reduction. However, modifications are necessary to efficiently scale these scrubbers for use in fossil fuel plants. Current advances in tailoring amines for CO2 capture involve improvements of bulk kinetic and thermodynamic parameters, with little consideration to surface chemistry and behavior. Aqueous alkanolamine solutions, such as monoethanolamine (MEA), are currently highly favored sorbents in CO2 post-combustion capture. Although numerous studies have explored MEA-CO2 chemistry at the macroscopic scale, few have investigated the role of the interface in the gas adsorption process. Additionally, as these amines become more industrially ubiquitous, their presence on and the need to understand their behavior at atmospheric and environmental surfaces will increase. This study investigates the surface behavior of monoethanolamine at the vapor/water interface, with particular focus on MEA's surface orientation and footprint. Using vibrational sum frequency spectroscopy, surface tensiometry, and computational techniques, MEA is found to adopt a constrained gauche interfacial conformation with its methylene backbone oriented toward the vapor phase and its functional groups solvated in the bulk solution. Computational and experimental analysis agree well, giving a complete picture with vibrational mode assignments and surface orientation of MEA. These findings can assist in the tailoring of amine structures or to facilitate improvements in engineering design to exploit favorable surface chemistry, as well as to serve as a starting point toward understanding aqueous amine surface behavior relevant to environmental systems.

Surface Prevalence of Perchlorate Anions at the Air/Aqueous Interface

Air/aqueous interfaces provide a unique environment for many chemical, environmental, and biological processes. To gain insight, molecular-level understanding of the interfacial water organization and ion distributions at these interfaces is required. Here, the air/aqueous interface of NaClO4 salt solutions was investigated by means of conventional and heterodyne-detected vibrational sum frequency generation (HD-VSFG) spectroscopy. It is found that perchlorate (ClO4(-)) ions exist in the interfacial region and prefer to reside on average above their counterions. This finding is inferred from the average orientation of the OH transition dipole moment of interfacial water molecules governed by the direction of the net electric field arising from the interfacial ion distributions. At the air/aqueous interface of NaClO4 salt solutions, the net dipole moments of hydrogen-bonded water molecules are oriented preferentially toward the vapor phase. Contrary to some other salts (e.g., sulfates), the presence of ClO4(-) may cause a full reversal in the direction of the interfacial electric field at a higher concentration (≥1.7 M). Another interpretation for the positive Im χ((2)) spectra of NaClO4 salt solutions could be an increase in the population of water species contributing positively to the net OH transition dipole moment. Regardless of the mechanism, this effect becomes even more pronounced with increasing salt concentration.

Vibrational Sum Frequency Generation Spectroscopy of the Water Liquid-Vapor Interface from Density Functional Theory-Based Molecular Dynamics Simulations

The vibrational sum frequency generation (VSFG) spectrum of the water liquid-vapor (LV) interface is calculated using density functional theory-based molecular dynamics simulations. The real and imaginary parts of the spectrum are in good agreement with the experimental data, and we provide an assignment of the SFG bands according to the dipole orientation of the interfacial water molecules. We use an instantaneous definition of the surface, which is more adapted to the study of interfacial phenomena than the Gibbs dividing surface. By calculating the vibrational (infrared, Raman) properties for interfaces of varying thickness, we show that the bulk spectra signatures appear after a thin layer of 2-3 Å only. We therefore use this value as a criterion for calculating the VSFG spectrum.

From Conventional to Phase-Sensitive Vibrational Sum Frequency Generation Spectroscopy: Probing Water Organization at Aqueous Interfaces

Elucidation of water organization at aqueous interfaces has remained a challenging problem. Conventional vibrational sum frequency generation (VSFG) spectroscopy and its most recent extension, phase-sensitive VSFG (PS-VSFG), have emerged as powerful experimental methods for unraveling structural information at various aqueous interfaces. In this Perspective, we briefly describe the two possible VSFG detection modes, and we point out features that make these methods highly suited to address questions about water organization at air/aqueous interfaces. Several important aqueous interfacial systems are discussed to illustrate the versatility of these methods. Remaining challenges and exciting prospective directions are also presented.

Vibrational spectrum at a water surface: a hybrid quantum mechanics/molecular mechanics molecular dynamics approach

A hybrid quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) simulation is applied to the calculation of surface orientational structure and vibrational spectrum (second-order nonlinear susceptibility) at the vapor/water interface for the first time. The surface orientational structure of the QM water molecules is consistent with the previous MD studies, and the calculated susceptibility reproduces the experimentally reported one, supporting the previous results using the classical force field MD simulation. The present QM/MM MD simulation also demonstrates that the positive sign of the imaginary part of the second-order nonlinear susceptibility at the lower hydrogen bonding OH frequency region originates not from individual molecular orientational structure, but from cooperative electronic structure through the hydrogen bonding network.