Determining In Situ Protein Conformation and Orientation from the Amide-I Sum-Frequency Generation Spectrum: Theory and Experiment

Light on the interactions between nanoparticles and lipid membranes by interface-sensitive vibrational spectroscopy

Nanoparticles are produced in natural phenomena or synthesized artificially for technological applications. Their frequent contact with humans has been judged potentially harmful for health, and numerous studies are ongoing to understand the mechanisms of the toxicity of nanoparticles. At the macroscopic level, the toxicity can be established in vitro or in vivo by measuring the survival of cells. At the sub-microscopic level, scientists want to unveil the molecular mechanisms of the first interactions of nanoparticles with cells via the cell membrane, before the toxicity cascades within the whole cell. Unveiling a molecular understanding of the nanoparticle-membrane interface is a tricky challenge, because of the chemical complexity of this system and its nanosized dimensions buried within bulk macroscopic environments. In this review, we highlight how, in the last 10 years, second-order nonlinear optical (NLO) spectroscopy, and specifically vibrational sum frequency generation (SFG), has provided a new understanding of the structural, physicochemical, and dynamic properties of these biological interfaces, with molecular sensitivity. We will show how the intrinsic interfacial sensitivity of second-order NLO and the chemical information of vibrational SFG spectroscopy have revealed new knowledge of the molecular mechanisms that drive nanoparticles to interact with cell membranes, from both sides, the nanoparticles and the membrane properties.

Integrated insulin-iron nanoparticles: a multi-modal approach for receptor-specific bioimaging, reactive oxygen species scavenging, and wound healing

Metallic nanoparticles have emerged as a promising option for various biological applications, owing to their distinct characteristics such as small size, optical properties, and ability to exhibit luminescence. In this study, we have successfully employed a one-pot method to synthesize multifunctional insulin-protected iron [Fe(II)] nanoparticles denoted as [IFe(II)NPs]. The formation of IFe(II)NPs is confirmed by the presence of FTIR bonds at 447.47 and 798.28 cm-1, corresponding to Fe-O and Fe-N bonds, respectively. Detailed analysis of the HR-TEM-EDS-SAED data reveals that the particles are spherical in shape, partially amorphous in nature, and have a diameter of 28.6 ± 5.2 nm. Additionally, Metal Ion Binding (MIB) and Protein Data Bank (PDB) analyses affirm the binding of iron ions to the insulin hexamer. Our findings underscore the potential of IFe(II)NPs as a promising new platform for a variety of biomedical applications due to their high signal-to-noise ratio, and minimal background fluorescence. The particles are highly luminescent, biocompatible, and have a significant quantum yield (0.632). Exemplar applications covered in this paper include insulin receptor recognition and protection against reactive oxygen species (ROS), harmful molecules known to inflict damage on cells and DNA. The IFe(II)NPs effectively mitigate ROS-induced inflammation, which is a hinderance to wound recovery, thereby facilitating enhanced wound recovery.

Umbrella-like Helical Structure of α-Synuclein at the Air-Water Interface Observed with Experimental and Theoretical Sum Frequency Generation Spectroscopy

The misfolding of α-synuclein (αS) into amyloid aggregates is catalyzed by hydrophobic surfaces and associated with severe brain disorders, such as Parkinson's disease. Despite the important role of interfaces, the three-dimensional structure of αS at the interfaces is still not clear. We report interface-specific sum frequency generation (SFG) experiments of monomeric αS binding to the air-water interface, a model system for the important hydrophobic surfaces. We combine the SFG spectra with calculations of theoretical spectra based on molecular dynamics simulations to show that αS, which is an intrinsically disordered protein in solution, folds into a defined, mostly helical secondary structure at the air-water interface. The binding pose resembles an umbrella shape, where the C-terminus protrudes into the water phase, while the N-terminus and the NAC region span the canopy at the interface. In this binding pose, αS is prone to aggregate, which could explain the catalytic effect of hydrophobic interfaces and air bubbles on αS fibrillation.

Liquid-Liquid Phase Separation of the Intrinsically Disordered Domain of the Fused in Sarcoma Protein Results in Substantial Slowing of Hydration Dynamics

Formation of liquid condensates plays a critical role in biology via localization of different components or via altered hydrodynamic transport, yet the hydrogen-bonding environment within condensates, pivotal for solvation, has remained elusive. We explore the hydrogen-bond dynamics within condensates formed by the low-complexity domain of the fused in sarcoma protein. Probing the hydrogen-bond dynamics sensed by condensate proteins using two-dimensional infrared spectroscopy of the protein amide I vibrations, we find that frequency-frequency correlations of the amide I vibration decay on a picosecond time scale. Interestingly, these dynamics are markedly slower for proteins in the condensate than in a homogeneous protein solution, indicative of different hydration dynamics. All-atom molecular dynamics simulations confirm that lifetimes of hydrogen-bonds between water and the protein are longer in the condensates than in the protein in solution. Altered hydrogen-bonding dynamics may contribute to unique solvation and reaction dynamics in such condensates.

Elevated concentrations cause upright alpha-synuclein conformation at lipid interfaces

The amyloid aggregation of α-synuclein (αS), related to Parkinson's disease, can be catalyzed by lipid membranes. Despite the importance of lipid surfaces, the 3D-structure and orientation of lipid-bound αS is still not known in detail. Here, we report interface-specific vibrational sum-frequency generation (VSFG) experiments that reveal how monomeric αS binds to an anionic lipid interface over a large range of αS-lipid ratios. To interpret the experimental data, we present a frame-selection method ("ViscaSelect") in which out-of-equilibrium molecular dynamics simulations are used to generate structural hypotheses that are compared to experimental amide-I spectra via excitonic spectral calculations. At low and physiological αS concentrations, we derive flat-lying helical structures as previously reported. However, at elevated and potentially disease-related concentrations, a transition to interface-protruding αS structures occurs. Such an upright conformation promotes lateral interactions between αS monomers and may explain how lipid membranes catalyze the formation of αS amyloids at elevated protein concentrations.

Crowding alters F-actin secondary structure and hydration

Actin, an important component of eukaryotic cell cytoskeleton, regulates cell shape and transport. The morphology and biochemical properties of actin filaments are determined by their structure and protein-protein contacts. Crowded environments can organize filaments into bundles, but less is known about how they affect F-actin structure. This study used 2D IR spectroscopy and spectral calculations to examine how crowding and bundling impact the secondary structure and local environments in filaments and weakly or strongly bundled networks. The results reveal that bundling induces changes in actin's secondary structure, leading to a decrease in β-sheet and an increase in loop conformations. Strongly bundled networks exhibit a decrease in backbone solvent exposure, with less perturbed α-helices and nearly "locked" β-sheets. Similarly, the loops become less hydrated but maintain a dynamic environment. These findings highlight the role of loop structure in actin network morphology and stability under morphology control by PEG.

Determination of protein conformation and orientation at buried solid/liquid interfaces

Protein structures at solid/liquid interfaces mediate interfacial protein functions, which are important for many applications. It is difficult to probe interfacial protein structures at buried solid/liquid interfaces in situ at the molecular level. Here, a systematic methodology to determine protein molecular structures (orientation and conformation) at buried solid/liquid interfaces in situ was successfully developed with a combined approach using a nonlinear optical spectroscopic technique - sum frequency generation (SFG) vibrational spectroscopy, isotope labeling, spectra calculation, and computer simulation. With this approach, molecular structures of protein GB1 and its mutant (with two amino acids mutated) were investigated at the polymer/solution interface. Markedly different orientations and similar (but not identical) conformations of the wild-type protein GB1 and its mutant at the interface were detected, due to the varied molecular interfacial interactions. This systematic strategy is general and can be widely used to elucidate protein structures at buried interfaces in situ.

Orientation of the Dysferlin C2A Domain is Responsive to the Composition of Lipid Membranes

Dysferlin is a 230 kD protein that plays a critical function in the active resealing of micron-sized injuries to the muscle sarcolemma by recruiting vesicles to patch the injured site via vesicle fusion. Muscular dystrophy is observed in humans when mutations disrupt this repair process or dysferlin is absent. While lipid binding by dysferlin's C2A domain (dysC2A) is considered fundamental to the membrane resealing process, the molecular mechanism of this interaction is not fully understood. By applying nonlinear surface-specific vibrational spectroscopy, we have successfully demonstrated that dysferlin's N-terminal C2A domain (dysC2A) alters its binding orientation in response to a membrane's lipid composition. These experiments reveal that dysC2A utilizes a generic electrostatic binding interaction to bind to most anionic lipid surfaces, inserting its calcium binding loops into the lipid surface while orienting its β-sheets 30-40° from surface normal. However, at lipid surfaces, where PI(4,5)P2 is present, dysC2A tilts its β-sheets more than 60° from surface normal to expose a polybasic face, while it binds to the PI(4,5)P2 surface. Both lipid binding mechanisms are shown to occur alongside dysC2A-induced lipid clustering. These different binding mechanisms suggest that dysC2A could provide a molecular cue to the larger dysferlin protein as to signal whether it is bound to the sarcolemma or another lipid surface.

In Situ Identification of Secondary Structures in Unpurified Bombyx mori Silk Fibrils Using Polarized Two-Dimensional Infrared Spectroscopy

The mechanical properties of biomaterials are dictated by the interactions and conformations of their building blocks, typically proteins. Although the macroscopic behavior of biomaterials is widely studied, our understanding of the underlying molecular properties is generally limited. Among the noninvasive and label-free methods to investigate molecular structures, infrared spectroscopy is one of the most commonly used tools because the absorption bands of amide groups strongly depend on protein secondary structure. However, spectral congestion usually complicates the analysis of the amide spectrum. Here, we apply polarized two-dimensional (2D) infrared spectroscopy (IR) to directly identify the protein secondary structures in native silk films cast from Bombyx mori silk feedstock. Without any additional peak fitting, we find that the initial effect of hydration is an increase of the random coil content at the expense of the helical content, while the β-sheet content is unchanged and only increases at a later stage. This paper demonstrates that 2D-IR can be a valuable tool for characterizing biomaterials.

Peptide Orientation at Emulsion Nanointerfaces Dramatically Different from Flat Surfaces

The adsorption of protein to nanoparticles plays an important role in toxicity, food science, pharmaceutics, and biomaterial science. Understanding how proteins bind to nanophase surfaces is instrumental for understanding and, ultimately, controlling nanoparticle (NP) biochemistry. Techniques probing the adsorption of proteins at NP interfaces exist; however, these methods have been unable to determine the orientation and folding of proteins at these interfaces. For the first time, we probe in situ with sum frequency scattering vibrational spectroscopy the orientation of model leucine-lysine (LK) peptides adsorbed to NPs. The results show that both α-helical and β-strand LK peptides bind the particles in an upright orientation, in contrast to the flat orientation of LKs binding to planar surfaces. The different binding geometry is explained by Coulombic forces between peptides across the particle volume.

Theoretical Sum Frequency Generation Spectra of Protein Amide with Surface-Specific Velocity-Velocity Correlation Functions

Vibrational sum frequency generation (vSFG) spectroscopy is widely used to probe the protein structure at interfaces. Because protein vSFG spectra are complex, they can only provide detailed structural information if combined with computer simulations of protein molecular dynamics and spectra calculations. We show how vSFG spectra can be accurately modeled using a surface-specific velocity-velocity scheme based on ab initio normal modes. Our calculated vSFG spectra show excellent agreement with the experimental sum frequency spectrum of LTα14 peptide and provide insight into the origin of the characteristic α-helical amide I peak. Analysis indicates that the peak shape can be explained largely by two effects: (1) the uncoupled response of amide groups located on opposite sides of the α-helix will have different orientations with respect to the interface and therefore different local environments affecting the local mode vibrations and (2) vibrational splitting from nearest neighbor coupling evaluated as inter-residue vibrational correlation. The conclusion is consistent with frequency mapping techniques with an empirically based ensemble of peptide structures, thus showing how time correlation approaches and frequency mapping techniques can give independent yet complementary molecular descriptions of protein vSFG. These models reveal the sensitive relationship between protein structure and their amide I response, allowing exploitation of the complicated molecular vibrations and their interference to derive the structures of proteins under native conditions at interfaces.

Tutorials in vibrational sum frequency generation spectroscopy. III. Collecting, processing, and analyzing vibrational sum frequency generation spectra

In this Tutorial series, we aim to provide an accessible introduction to vibrational sum frequency generation (VSFG) spectroscopy, targeted toward people entering the VSFG world without a rigorous formal background in optical physics or nonlinear spectroscopy. In this article, we discuss in detail the processes of collecting and processing VSFG data, and user-friendly processing software (sfgtools) is provided for use by people new to the field. Some discussion of analyzing VSFG spectra is also given, specifically with a discussion of fitting homodyne VSFG spectra, and a discussion of what can be learned (both qualitatively and quantitatively) from VSFG spectra.

Polarization-Dependent Heterodyne-Detected Sum-Frequency Generation Spectroscopy as a Tool to Explore Surface Molecular Orientation and Ångström-Scale Depth Profiling

Sum-frequency generation (SFG) spectroscopy provides a unique optical probe for interfacial molecules with interface-specificity and molecular specificity. SFG measurements can be further carried out at different polarization combinations, but the target of the polarization-dependent SFG is conventionally limited to investigating the molecular orientation. Here, we explore the possibility of polarization-dependent SFG (PD-SFG) measurements with heterodyne detection (HD-PD-SFG). We stress that HD-PD-SFG enables accurate determination of the peak amplitude, a key factor of the PD-SFG data. Subsequently, we outline that HD-PD-SFG can be used not only for estimating the molecular orientation but also for investigating the interfacial dielectric profile and studying the depth profile of molecules. We further illustrate the variety of combined simulation and PD-SFG studies.

Exploring Interfacial Hydrolysis of Artificial Neutral Lipid Monolayer and Bilayer Catalyzed by Phospholipase C

Phospholipase C (PLC) represents an important type of enzymes with the feature of hydrolyzing phospholipids at the position of the glycerophosphate bond, among which PLC extracted from Bacillus cereus (BC-PLC) has been extensively studied owing to its similarity to hitherto poorly characterized mammalian analogues. This study focuses on investigating the interfacial hydrolysis mechanism of phosphatidylcholine (PC) monolayer and bilayer membranes catalyzed by BC-PLC using sum frequency generation vibrational spectroscopy (SFG-VS) and laser scanning confocal microscopy (LSCM). We found that, upon interfacial hydrolysis, BC-PLC was adsorbed onto the lipid interface and catalyzed the lipolysis with no net orientation, as evidenced by the silent amide I band, indicating that ordered PLC alignment was not a prerequisite for the enzyme activity, which is very different from what we have reported for phospholipase A₁ (PLA₁) and phospholipase A₂ (PLA₂) [Kai, S. Phys. Chem. Chem. Phys. 2018, 20(1), 63-67; Wang, F. Langmuir 2019, 35(39), 12831-12838; Zhang, F. Langmuir 2020, 36(11), 2946-2953]. For the PC monolayer, one of the two hydrolysates, phosphocholine, desorbed from the interface into the aqueous phase, while the other one, diacylglycerol (DG), stayed well packed with high order at the interface. For the PC bilayer, phosphocholine dispersed into the aqueous phase too, similar to the monolayer case; however, DG, presumably formed clusters with the unreacted lipid substrates and desorbed from the interface. With respect to both the monolayer and bilayer cases, mechanistic schematics were presented to illustrate the different interfacial hydrolysis processes. Therefore, this model experimental study in vitro provides significant molecular-level insights and contributes necessary knowledge to reveal the lipolysis kinetics with respect to PLC and lipid membranes with monolayer and bilayer structures.

Peptide Mimic of the Marine Sponge Protein Silicatein Fabricates Ultrathin Nanosheets of Silicon Dioxide and Titanium Dioxide

Two-dimensional (2D) materials have attracted attention for potential applications in light harvesting, catalysis, and molecular electronics. Mineral proteins involved in hard tissue biogenesis can produce 2D structures with high fidelity by using sustainable production routes. This study shows that a peptide mimic based on the catalytic triad of the marine sponge protein silicatein catalyzes the formation of nanometer thin and stable sheets of silicon dioxide and titanium dioxide.

Structure and Orientation of the SARS-Coronavirus-2 Spike Protein at Air-Water Interfaces

The SARS coronavirus 2 (SARS-CoV-2) spike protein is located at the outermost perimeter of the viral envelope and is the first component of the virus to make contact with surrounding interfaces. The stability of the spike protein when in contact with surfaces plays a deciding role for infection pathways and for the viability of the virus after surface contact. While cryo-EM structures of the spike protein have been solved with high resolution and structural studies in solution have provided information about the secondary and tertiary structures, only little is known about the folding when adsorbed to surfaces. We here report on the secondary structure and orientation of the S1 segment of the spike protein, which is often used as a model protein for in vitro studies of SARS-CoV-2, at the air-water interface using surface-sensitive vibrational sum-frequency generation (SFG) spectroscopy. The air-water interface plays an important role for SARS-CoV-2 when suspended in aerosol droplets, and it serves as a model system for hydrophobic surfaces in general. The SFG experiments show that the S1 segment of the spike protein remains folded at the air-water interface and predominantly binds in its monomeric state, while the combination of small-angle X-ray scattering and two-dimensional infrared spectroscopy measurements indicate that it forms hexamers with the same secondary structure in aqueous solution.

Choose your own adventure: Picosecond or broadband vibrational sum-frequency generation spectroscopy

Vibrational sum-frequency generation (VSFG) spectroscopy is a method capable of measuring chemical structure and dynamics within the interfacial region between two bulk phases. At the core of every experimental system is a laser source that influences the experimental capabilities of the VSFG spectrometer. In this article, we discuss the differences between VSFG spectrometers built with picosecond and broadband laser sources as it will impact everything from material costs, experimental build time, experimental capabilities, and more. A focus is placed on the accessibility of the two different SFG systems to newcomers in the SFG field and provides a resource for laboratories considering incorporating VSFG spectroscopy into their research programs. This Tutorial provides a model decision tree to aid newcomers when determining whether the picosecond or femtosecond laser system is sufficient for their research program and navigates through it for a few specific scenarios.

Membrane Structure of Aquaporin Observed with Combined Experimental and Theoretical Sum Frequency Generation Spectroscopy

High-resolution structural information on membrane proteins is essential for understanding cell biology and for the structure-based design of new medical drugs and drug delivery strategies. X-ray diffraction (XRD) can provide angstrom-level information about the structure of membrane proteins, yet for XRD experiments, proteins are removed from their native membrane environment, chemically stabilized, and crystallized, all of which can compromise the conformation. Here, we describe how a combination of surface-sensitive vibrational spectroscopy and molecular dynamics simulations can account for the native membrane environment. We observe the structure of a glycerol facilitator channel (GlpF), an aquaporin membrane channel finely tuned to selectively transport water and glycerol molecules across the membrane barrier. We find subtle but significant differences between the XRD structure and the inferred in situ structure of GlpF.

Probing Orientations and Conformations of Peptides and Proteins at Buried Interfaces

Molecular structures of peptides/proteins at interfaces determine their interfacial properties, which play important roles in many applications. It is difficult to probe interfacial peptide/protein structures because of the lack of appropriate tools. Sum frequency generation (SFG) vibrational spectroscopy has been developed into a powerful technique to elucidate molecular structures of peptides/proteins at buried solid/liquid and liquid/liquid interfaces. SFG has been successfully applied to study molecular interactions between model cell membranes and antimicrobial peptides/membrane proteins, surface-immobilized peptides/enzymes, and physically adsorbed peptides/proteins on polymers and 2D materials. A variety of other analytical techniques and computational simulations provide supporting information to SFG studies, leading to more complete understanding of structure-function relationships of interfacial peptides/proteins. With the advance of SFG techniques and data analysis methods, along with newly developed supplemental tools and simulation methodology, SFG research on interfacial peptides/proteins will further impact research in fields like chemistry, biology, biophysics, engineering, and beyond.

Interaction of Amyloid-β-(1-42) Peptide and Its Aggregates with Lipid/Water Interfaces Probed by Vibrational Sum-Frequency Generation Spectroscopy

In this study, we use surface-sensitive vibrational sum-frequency generation (VSFG) spectroscopy to investigate the interaction between model lipid monolayers and Aβ(1-42) in its monomeric and aggregated states. Combining VSFG with atomic force microscopy (AFM) and thioflavin T (ThT) fluorescence measurements, we found that only small aggregates with probably a β-hairpin-like structure adsorbed to the zwitterionic lipid monolayer (DOPC). In contrast, larger aggregates with an extended β-sheet structure adsorbed to a negatively charged lipid monolayer (DOPG). The adsorption of small, initially formed aggregates strongly destabilized both monolayers, but only the DOPC monolayer was completely disrupted. We showed that the intensity of the amide-II' band in achiral (SSP) and chiral (SPP) polarization combinations increased in time when Aβ(1-42) aggregates accumulated at the DOPG monolayer. Nevertheless, almost no adsorption of preformed mature fibrils to DOPG monolayers was detected. By performing spectral VSFG calculations, we revealed a clear correlation between the amide-II' signal and the degree of amyloid aggregates (e.g., oligomers or (proto)fibrils) of various Aβ(1-42) structures. The calculations showed that only structures with a significant amyloid β-sheet content have a strong amide-II' intensity, in line with previous Raman studies. The combination of the presented results substantiates the amide-II(') band as a legitimate amyloid marker.

Effect of Surfactant Concentration and Hydrophobicity on the Ordering of Water at a Silica Surface

The performance of nonionic surfactants is mediated by the interfacial interactions at the solid-liquid interface. Here we applied sum frequency generation (SFG) vibrational spectroscopy to probe the molecular structure of the silica-nonionic surfactant solution interface in situ, supplemented by quartz crystal microbalance with dissipation monitoring (QCM-D) and molecular dynamics (MD) simulations. The combined studies elucidated the effects of nonionic surfactant solution concentration, surfactant composition, and rinsing on the silica-surfactant solution interfacial structure. The nonionic surfactants studied include ethylene-oxide (EO) and butylene oxide (BO) components with different ratios. It was found that the CH groups of the surfactants at the silica-surfactant solution interfaces are disordered, but the interfacial water molecules are ordered, generating strong SFG OH signals. Solutions with higher concentrations of surfactant lead to a slightly higher amount of adsorbed surfactant at the silica interface, resulting in more water molecules being ordered at the interface, or a higher ordering of water molecules at the interface, or both. MD simulation results indicated that the nonionic surface molecules preferentially adsorb onto silanol sites on silica. A surfactant with a higher EO/BO ratio leads to more water molecules being ordered and a higher degree of ordering of water molecules at the silica-surfactant solution interface, exhibiting stronger SFG OH signal, although less material is adsorbed according to the QCM-D data. A thin layer of surfactants remained on the silica surface after multiple water rinses. To the best of our knowledge, this is the first time the combined approaches of SFG, QCM-D and MD simulation techniques have been applied to study nonionic surfactants at the silica-solution interface, which enhances our understanding on the interfacial interactions between nonionic surfactants, water and silica. The knowledge obtained from this study can be helpful to design the optimal surfactant concentration and composition for future applications.

Developments and Ongoing Challenges for Analysis of Surface-Bound Proteins

Proteins at surfaces and interfaces play important roles in the function and performance of materials in applications ranging from diagnostic assays to biomedical devices. To improve the performance of these materials, detailed molecular structure (conformation and orientation) along with the identity and concentrations of the surface-bound proteins on those materials must be determined. This article describes radiolabeling, surface plasmon resonance, quartz crystal microbalance with dissipation, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, sum frequency generation spectroscopy, and computational techniques along with the information each technique provides for characterizing protein films. A multitechnique approach using both experimental and computation methods is required for these investigations. Although it is now possible to gain much insight into the structure of surface-bound proteins, it is still not possible to obtain the same level of structural detail about proteins on surfaces as can be obtained about proteins in crystals and solutions, especially for large, complex proteins. However, recent results have shown it is possible to obtain detailed structural information (e.g., backbone and side chain orientation) about small peptides (5-20 amino sequences) on surfaces. Current studies are extending these investigations to small proteins such as protein G B1 (∼6 kDa). Approaches for furthering the capabilities for characterizing the molecular structure of surface-bound proteins are proposed.

Interfacial Structure and Interfacial Tension in Model Carbon Fiber-Reinforced Polymers

Carbon fiber-reinforced plastics (CFRPs) are widely used materials with outstanding mechanical properties. The wettability between the polymer matrix and carbon fiber in the interphase region significantly influences the strength of the composite. Sizing agents consisting of multiple components are therefore frequently applied to improve wetting and interfacial adhesion between polymers and carbon fiber in CFRPs. However, the complex compositions of sizing solutions make detailed interpretations of their impacts on interfacial wetting difficult. In this work, surface-sensitive sum frequency generation (SFG) spectroscopy was utilized to characterize the sizing/polymer and sizing/carbon fiber interfacial structures to gain molecular-level understandings of the wetting improvements afforded by sizing. A mixture sizing solution containing polyethylenimine (PEI, adhesion promoter) and Lutensol (surfactant) was investigated when contacting nylon (model plastics), polypropylene (model plastics), and graphite (model carbon fiber). Our results demonstrated that although the addition of the surfactant led to an interfacial tension decrease (in comparison to pure PEI solution) on nylon and polypropylene, the interfacial tension was surprisingly increased on graphite, contrasting with the commonly accepted function of surfactants. SFG characterizations revealed the multilayer molecular structures at these buried interfaces. The peculiar interfacial tension increase at the graphite/sizing interface was then correlated to the strong amine-π interactions between PEI and graphite. PEI was therefore demonstrated to be an effective adhesion promoter for carbon fiber. This article reports the first investigation of (polymer + surfactant) complex structures at solid-liquid interfaces. The valuable structural insights obtained by SFG analysis enable more accurate understandings of the composition-wettability (structure-function) relationship. These detailed understandings of interactions between sizing and the substrates promote more informed and optimized selections of sizing formulae.

Interfacial Water Ordering Is Insufficient to Explain Ice-Nucleating Protein Activity

Ice-nucleating proteins (INPs) found in bacteria are the most effective ice nucleators known, enabling the crystallization of water at temperatures close to 0 °C. Although their function has been known for decades, the underlying mechanism is still under debate. Here, we show that INPs from Pseudomonas syringae in aqueous solution exhibit a defined solution structure and show no significant conformational changes upon cooling. In contrast, irreversible structural changes are observed upon heating to temperatures exceeding ∼55 °C, leading to a loss of the ice-nucleation activity. Sum-frequency generation (SFG) spectroscopy reveals that active and heat-inactivated INPs impose similar structural ordering of interfacial water molecules upon cooling. Our results demonstrate that increased water ordering is not sufficient to explain INPs' high ice-nucleation activity and confirm that intact three-dimensional protein structures are critical for bacterial ice nucleation, supporting a mechanism that depends on the INPs' supramolecular interactions.

Direct Evidence That Mutations within Dysferlin's C2A Domain Inhibit Lipid Clustering

Mechanical stress on sarcolemma can create small tears in the muscle cell membrane. Within the sarcolemma resides the multidomain dysferlin protein. Mutations in this protein render it unable to repair the sarcolemma and have been linked to muscular dystrophy. A key step in dysferlin-regulated repair is the binding of the C2A domain to the lipid membrane upon increased intracellular calcium. Mutations mapped to this domain cause loss of binding ability of the C2A domain. There is a crucial need to understand the geometry of dysferlin C2A at a membrane interface as well as cell membrane lipid reorientation when compared to that of a mutant. Here, we describe a comparison between the wild-type dysferlin C2A and a mutation to the conserved aspartic acids in the domain binding loops. To identify both the geometry and the cell membrane lipid reorientation, we applied sum frequency generation (SFG) vibrational spectroscopy and coupled it with simulated SFG spectra to observe and quantify the interaction with a model cell membrane composed of phosphotidylserine and phosphotidylcholine. Observed changes in surface pressure demonstrate that calcium-bridged electrostatic interactions govern the initial interaction of the C2A domains docking with a lipid membrane. SFG spectra taken from the amide-I region for the wild type and variant contain features near 1642, 1663, and 1675 cm^-1 related to the C2A domain β-sandwich secondary structure, indicating that the domain binds in a specific orientation. Mapping simulated SFG spectra to the experimentally collected spectra indicated that both wild-type and variant domains have nearly the same orientation to the membrane surface. However, examining the ordering of the lipids that make up a model membrane using SFG, we find that the wild type clusters the lipids as seen by the increase in the ratio of the CD₃ and CD₂ symmetric intensities by 170% for the wild type and by 120% for the variant. This study highlights the capabilities of SFG to probe with great detail biological mutations in proteins at cell membrane interfaces.

Nonlinear and vibrational microscopy for label-free characterization of amyloid-β plaques in Alzheimer's disease model

Multimodal optical imaging was used for characterization of amyloid-β plaques in mouse brain tissues. We obtained high-resolution images for different biomarkers and investigated vibrational fingerprints that could be used for diagnostic purposes.

Orientation and Conformation of Proteins at the Air-Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. In this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.

Corn Oil-Water Separation: Interactions of Proteins and Surfactants at Corn Oil/Water Interfaces

Purification and collection of industrial products from oil-water mixtures are commonly implemented processes. However, the efficiencies of such processes can be severely influenced by the presence of emulsifiers that induce the formation of small oil droplets dispersed in the mixtures. Understanding of this emulsifying effect and its counteractions which occur at the oil/water interface is therefore necessary for the improvement of designs of these processes. In this paper, we investigated the interfacial mechanisms of protein-induced emulsification and the opposing surfactant-induced demulsification related to corn oil refinement. At corn oil/water interfaces, the pH-dependent emulsifying function of zein protein, which is the major storage protein of corn, was elucidated by the surface/interface-sensitive sum frequency generation (SFG) vibrational spectroscopy technique. The effective stabilization of corn oil droplets by zein protein was illustrated and correlated to its ordered amide I group at the oil/water interface. Substantial decrease of this ordering with the addition of three industrial surfactants to corn oil-zein solution mixtures was also observed using SFG, which explains the surfactant-induced destabilization and coalescence of small oil droplets. Surfactant-protein interaction was then demonstrated to be the driving force for the disordering of interfacial proteins, either by disrupting protein layers or partially excluding protein molecules from the interface. The ordered zein proteins at the interface were therefore revealed to be the critical factor for the formation of corn oil-water emulsion.

Probing the Interfacial Interactions of Monoclonal and Bispecific Antibodies at the Silicone Oil-Aqueous Solution Interface by Using Sum Frequency Generation Vibrational Spectroscopy

Silicone oil has been widely utilized in the pharmaceutical industry especially as a lubricant coating commonly used in syringes for the smooth delivery of drugs. Protein structure perturbation and aggregation have been reported upon protein contacting silicone oil by using indirect methods and ex-situ techniques. The conclusions derived from such indirect and ex-situ methods may not truly reflect the exact nature of the protein-silicone oil interfacial interactions. Recently, we have successfully demonstrated that sum frequency generation (SFG) vibrational spectroscopy can be used as a powerful and direct method of studying the fusion protein-silicone oil interfacial interactions in situ and in real time. In this article, we studied monoclonal and bispecific antibody interactions with the silicone oil surface by using SFG spectroscopy. Being structurally and functionally different in the nature of fusion proteins and antibodies, this study is important in enhancing our current understanding of protein-silicone oil interfacial interactions. Both types of antibodies investigated here readily and strongly adsorb onto the silicone oil surface and remain stable at least for 10 h. SFG spectra in the amide I region for monoclonal and bispecific antibodies centered at 1660 and 1665 cm^-1, respectively, suggest the difference in their molecular structures. The absence of the antibody signals in the amide I region of time-dependent and static SFG spectra obtained for preadsorbed antibodies onto silicone oil after contacting polysorbate 80 (PS-80) surfactant suggests that PS-80 can effectively remove both types of antibodies from the silicone oil surface. This study demonstrated the feasibility of using SFG spectroscopy as a powerful tool for probing the antibody-interfacial interactions in situ and in real time.

Both Poly(ethylene glycol) and Poly(methyl ethylene phosphate) Guide Oriented Adsorption of Specific Proteins

Developing new functional biomaterials requires the ability to simultaneously repel unwanted and guide wanted protein adsorption. Here, we systematically interrogate the factors determining the protein adsorption by comparing the behaviors of different polymeric surfaces, poly(ethylene glycol) and a poly(phosphoester), and five different natural proteins. Interestingly we observe that, at densities comparable to those used in nanocarrier functionalization, the same proteins are either adsorbed (fibrinogen, human serum albumin, and transferrin) or repelled (immunoglobulin G and lysozyme) by both polymers. However, when adsorption takes place, the specific surface dictates the amount and orientation of each protein.

Otoferlin C2F Domain-Induced Changes in Membrane Structure Observed by Sum Frequency Generation

Proteins that contain C2 domains are involved in a variety of biological processes, including encoding of sound, cell signaling, and cell membrane repair. Of particular importance is the interface activity of the C-terminal C2F domain of otoferlin due to the pathological mutations known to significantly disrupt the protein's lipid membrane interface binding activity, resulting in hearing loss. Therefore, there is a critical need to define the geometry and positions of functionally important sites and structures at the otoferlin-lipid membrane interface. Here, we describe the first in situ probe of the protein orientation of otoferlin's C2F domain interacting with a cell membrane surface. To identify this protein's orientation at the lipid interface, we applied sum frequency generation (SFG) vibrational spectroscopy and coupled it with simulated SFG spectra to observe and quantify the otoferlin C2F domain interacting with model lipid membranes. A model cell membrane was built with equal amounts of phosphatidylserine and phosphatidylcholine. SFG measurements of the lipids that make up the model membrane indicate a 62% increase in amplitude from the SFG signal near 2075 cm^-1 upon protein interaction, suggesting domain-induced changes in the orientation of the lipids and possible membrane curvature. This increase is related to lipid ordering caused by the docking interaction of the otoferlin C2F domain. SFG spectra taken from the amide-I region contain features near 1630 and 1670 cm^-1 related to the C2F domains beta-sandwich secondary structure, thus indicating that the domain binds in a specific orientation. By mapping the simulated SFG spectra to the experimentally collected SFG spectra, we found the C2F domain of otoferlin orients 22° normal to the lipid surface. This information allows us to map what portion of the domain directly interacts with the lipid membrane.

Peptide-Controlled Assembly of Macroscopic Calcium Oxalate Nanosheets

The fabrication of two-dimensional (2D) biomineral nanosheets is of high interest owing to their promise for applications in electronics, filtration, catalysis, and chemical sensing. Using a facile approach inspired by biomineralization in nature, we fabricate laterally macroscopic calcium oxalate nanosheets using β-folded peptides. The template peptides are composed of repetitive glutamic acid and leucine amino acids, self-organized at the air-water interface. Surface-specific sum frequency generation spectroscopy and molecular dynamics simulations reveal that the formation of oxalate nanosheets relies on the peptide-Ca²⁺ ion interaction at the interface, which not only restructures the peptides but also templates Ca²⁺ ions into a calcium oxalate dihydrate lattice. Combined, this enables the formation of a critical structural intermediate in the assembly pathway toward the oxalate sheet formation. These insights into peptide-ion interfacial interaction are important for designing novel inorganic 2D materials.

Structure of von Willebrand factor A1 on polystyrene determined from experimental and calculated sum frequency generation spectra

The blood-clotting protein von Willebrand factor (vWF) can be activated by small molecules, high shear stress, and interactions with interfaces. It subsequently binds platelet receptor glycoprotein Ibα (GPIbα) at the surface of platelets, thereby playing a crucial role in blood clotting due to platelet activation, which is an important process to consider in the design of cardiovascular implants and biomaterials used in blood-contacting applications. The influence of surfaces on the activation and the molecular-level structure of surface-bound vWF is largely unknown. Recent studies have indicated that when bound to hydrophobic polystyrene (PS), the A1 domain of vWF remains accessible for GPIbα binding. However, the detailed secondary structure and exact orientation of vWF A1 at the PS surface is still unresolved. Here, the authors resolve these features by studying the system with sum-frequency generation (SFG) spectroscopy. The data are consistent with a scenario where vWF A1 maintains a native secondary structure when bound to PS. Comparison of experimental and calculated SFG spectra combined with previously reported time-of-flight secondary ion mass spectrometry data suggests that A1 assumes an orientation with the GPIbα binding domain oriented away from the solid surface and exposed to the solution phase. This structural information will benefit future in vitro experiments with surface-adsorbed A1 domain and may have relevance for the design of novel blood-contacting biomaterials and wound-healing applications.

Novel nano-insulin formulation modulates cytokine secretion and remodeling to accelerate diabetic wound healing

Little is known about insulin's wound healing capability in normal as well as diabetic conditions. We here report specific interaction of silver nanoparticles (AgNPs) with insulin by making a ~2 nm thick coat around the AgNPs and its potent wound healing efficacy. Characterization of the interaction of human insulin with silver nanoparticles showed confirmed alteration of amide-I in insulin whereas amide-II and III remained unaltered. Further, nanoparticles protein interaction kinetics showed spontaneous interaction at physiological temperature with ΔG, ΔS, Ea and Ka values -7.48, 0.076, 3.84 kcal mol^-1 and 6 × 10⁵ s^-1 respectively. Insulin loaded AgNPs (IAgNPs) showed significant improvement in healing activity in vitro (HEKa cells) and in vivo (Wister Rats) in comparison with the control in both normal and diabetic conditions. The underlying mechanism was attributed to a regulation of the balance between pro (IL-6, TNFα) and anti-inflammatory cytokines (IL-10) at the wound site to promote faster wound remodeling.

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions

Once materials come into contact with a biological fluid containing proteins, proteins are generally—whether desired or not—attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.

Nonlinear Optical Methods for Characterization of Molecular Structure and Surface Chemistry

The principles, strengths and limitations of several nonlinear optical (NLO) methods for characterizing biological systems are reviewed. NLO methods encompass a wide range of approaches that can be used for real-time, in-situ characterization of biological systems, typically in a label-free mode. Multiphoton excitation fluorescence (MPEF) is widely used for high-quality imaging based on electronic transitions, but lacks interface specificity. Second harmonic generation (SHG) is a parametric process that has all the virtues of the two-photon version of MPEF, yielding a signal at twice the frequency of the excitation light, which provides interface specificity. Both SHG and MPEF can provide images with high structural contrast, but they typically lack molecular or chemical specificity. Other NLO methods such as coherent anti-Stokes Raman scattering (CARS) and stimulated Raman scattering (SRS) can provide high-sensitivity imaging with chemical information since Raman active vibrations are probed. However, CARS and SRS lack interface and surface specificity. A NLO method that provides both interface/surface specificity as well as molecular specificity is vibrational sum frequency generation (SFG) spectroscopy. Vibration modes that are both Raman and IR active are probed in the SFG process, providing the molecular specificity. SFG, like SHG, is a parametric process, which provides the interface and surface specificity. SFG is typically done in the reflection mode from planar samples. This has yielded rich and detailed information about the molecular structure of biomaterial interfaces and biomolecules interacting with their surfaces. However, 2-D systems have limitations for understanding the interactions of biomolecules and interfaces in the 3-D biological environment. The recent advances made in instrumentation and analysis methods for sum frequency scattering (SFS) now present the opportunity for SFS to be used to directly study biological solutions. By detecting the scattering at angles away from the phase-matched direction even centrosymmetric structures that are isotropic (e.g., spherical nanoparticles functionalized with self-assembled monolayers or biomolecules) can be probed. Often a combination of multiple NLO methods or a combination of a NLO method with other spectroscopic methods is required to obtain a full understanding of the molecular structure and surface chemistry of biomaterials and the biomolecules that interact with them. Using the right combination methods provides a powerful approach for characterizing biological materials.

Repelling and ordering: the influence of poly(ethylene glycol) on protein adsorption

Development of new materials for drug delivery and biosensing requires the fine-tuning of interfacial properties. We report here the influence of the poly(ethylene glycol) (PEG) grafting density in model phospholipid monolayers on the adsorption behavior of bovine serum albumin and human fibrinogen, not only with respect to the amount of adsorbed protein, but also its orientational ordering on the surface. As expected, with increasing interfacial PEG density, the amount of adsorbed protein decreases up to the point where complete protein repellency is reached. However, at intermediate concentrations, the net orientation of adsorbed fibrinogen is highest. The different proteins respond differently to PEG, not only in the amount of protein adsorbed, but also in the manner that proteins adsorb. The results show that for specific cases, tuning the interfacial PEG concentration allows to guide the protein adsorption configuration, a feature sought after in materials for both biosensing and biomedical applications.

Ice-binding site of surface-bound type III antifreeze protein partially decoupled from water

Combined SFG/MD analysis together with spectral calculations revealed that type III antifreeze proteins adsorbed at the air–water interface maintains a native state and adopts an orientation that leads to a partial decoupling of its ice-binding site from water.

Coupled-cluster sum-frequency generation nonlinear susceptibilities of methyl (CH3) and methylene (CH2) groups

The first vibrational sum frequency generation (SFG) spectra based on molecular properties calculated at the coupled cluster singles and doubles (CCSD) level of approximation have been simulated for interfacial model alkyl chains, providing benchmark data for comparisons with approximate methods, including density functional theory (DFT). The approach proceeds in three steps. In the first two steps, the molecular spectral properties are determined: the vibrational normal modes and frequencies and then the derivatives of the dipole moment and of the polarizability with respect to the normal coordinates. These derivatives are evaluated with a numerical differentiation approach, of which the accuracy was monitored using Romberg's procedure. Then, in the last step, a three-layer model is employed to evaluate the macroscopic second-order nonlinear optical responses and thereby the simulated SFG spectra of the alkyl interface. Results emphasize the following facts: (i) the dipole and polarizability derivatives calculated at the DFT level with the B3LYP exchange-correlation functional can differ, with respect to CCSD, by as much as ±10 to 20% and ±20 to 50% for the CH₃ and CH₂ vibrations, respectively; (ii) these differences are enhanced when considering the SFG intensities as well as their variations as a function of the experimental configuration (ppp versus ssp) and as a function of the tilt and rotation angles, defining the orientation of the alkyl chain at the interface; (iii) these differences originate from both the vibrational normal coordinates and the Cartesian derivatives of the dipole moment and polarizability; (iv) freezing the successive fragments of the alkyl chain strongly modifies the SFG spectrum and enables highlighting the delocalization effects between the terminal CH₃ group and its neighboring CH₂ units; and finally (v) going from the free chain to the free methyl model, and further to C_3v constraints on leads to large variations of two ratios that are frequently used to probe the molecular orientation at the interface, the (r + r)/r⁺ ratio for both antisymmetric and symmetric CH₃ vibrations and the I_ppp/I_ssp ratio.

C-Terminal Truncated α-Synuclein Fibrils Contain Strongly Twisted β-Sheets

C-terminal truncations of monomeric wild-type alpha-synuclein (henceforth WT-αS) have been shown to enhance the formation of amyloid aggregates both in vivo and in vitro and have been associated with accelerated progression of Parkinson’s disease (PD). The correlation with PD may not solely be a result of faster aggregation, but also of which fibril polymorphs are preferentially formed when the C-terminal residues are deleted. Considering that different polymorphs are known to result in distinct pathologies, it is important to understand how these truncations affect the organization of αS into fibrils. Here we present high-resolution microscopy and advanced vibrational spectroscopy studies that indicate that the C-terminal truncation variant of αS, lacking residues 109–140 (henceforth referred to as 1–108-αS), forms amyloid fibrils with a distinct structure and morphology. The 1–108-αS fibrils have a unique negative circular dichroism band at ∼230 nm, a feature that differs from the canonical ∼218 nm band usually observed for amyloid fibrils. We show evidence that 1–108-αS fibrils consist of strongly twisted β-sheets with an increased inter-β-sheet distance and a higher solvent exposure than WT-αS fibrils, which is also indicated by the pronounced differences in the 1D-IR (FTIR), 2D-IR, and vibrational circular dichroism spectra. As a result of their distinct β-sheet structure, 1–108-αS fibrils resist incorporation of WT-αS monomers.

Determination of Absolute Orientation of Protein α-Helices at Interfaces Using Phase-Resolved Sum Frequency Generation Spectroscopy

Understanding the structure of proteins at surfaces is key in fields such as biomaterials research, biosensor design, membrane biophysics, and drug design. A particularly important factor is the orientation of proteins when bound to a particular surface. The orientation of the active site of enzymes or protein sensors and the availability of binding pockets within membrane proteins are important design parameters for engineers developing new sensors, surfaces, and drugs. Recently developed methods to probe protein orientation, including immunoessays and mass spectrometry, either lack structural resolution or require harsh experimental conditions. We here report a new method to track the absolute orientation of interfacial proteins using phase-resolved sum frequency generation spectroscopy in combination with molecular dynamics simulations and theoretical spectral calculations. As a model system we have determined the orientation of a helical lysine-leucine peptide at the air-water interface. The data show that the absolute orientation of the helix can be reliably determined even for orientations almost parallel to the surface.