State of hydrophobic and hydrophilic ionic liquids in aqueous solutions: are the ions fully dissociated?

Atomistic molecular dynamics simulation and COSMO-SAC approach for enhanced 1,3-propanediol extraction with imidazolium-based ionic liquids

CONTEXT

1,3-Propanediol (1,3-PDO) is a key chemical in various industries, including pharmaceuticals and material sciences, and is projected to see significant market growth. However, the current challenges in its downstream processing, particularly in terms of cost and efficiency, highlight the need for innovative solutions. Our study delves into using ionic liquids (ILs) as a potential alternative, aiming to address these critical separation challenges more sustainably and efficiently. In this study, we utilized molecular dynamics (MD) simulations and the COSMO-SAC to examine 1,3-propanediol (1,3-PDO) extraction using four imidazolium-based ionic liquids with 1-butyl-3-methylimidazolium [Bmim] cation and with different anions bis(pentafluoroethanesulfonyl)imide [NPF2]-, bis(trifluoromethylsulfonyl)imide [NTF2]-, thiocyanate [SCN]-, and trifluoromethanesulfonate [TFO]-. Molecular dynamics simulations, incorporating analysis of radial distribution functions (RDF) and spatial distribution functions (SDF), revealed that [Bmim][SCN] and [Bmim][TFO] exhibit enhanced interactions with 1,3-PDO. Notably, [Bmim][SCN] formed the most hydrogen bonds, averaging 1.639 per molecule, due to its coordinating [SCN]- anion. This was in contrast to the fewer hydrogen bonds formed by non-coordinating anions in [Bmim][NPF2] and [Bmim][NTF2]. In ternary systems, [Bmim][SCN] and [Bmim][TFO] demonstrated superior selectivity for 1,3-PDO extraction compared to the other ionic liquids, with selectivity values around 29. These findings, supported by COSMO-SAC predictive modeling, highlight the potential of [Bmim][SCN] as a promising candidate for 1,3-PDO extraction, emphasizing the importance of anion selection in optimizing ionic liquid properties for this application.

METHODS

In our study, we employed MD simulations, incorporating the OPLS-AA force field, and COSMO-SAC to investigate the extraction of 1,3-PDO using imidazolium-based ionic liquids: [Bmim][NTF2], [Bmim][NPF2], [Bmim][SCN], and [Bmim][TFO]. The MD simulations were conducted using LAMMPS software, focusing on elucidating the RDF, SDF, and hydrogen bonding. Analysis of the distribution coefficient (β) and selectivity (S) for the ternary mixture was also conducted. These aspects of the simulation were analyzed using TRAVIS and VMD software. Additionally, the COSMO-SAC model was employed to determine the activity coefficients of 1,3-PDO in the ionic liquids, with molecular optimization conducted using Gaussian16 and sigma profile calculations performed using COSMO-SAC.

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

Ionic Pairing and Selective Solvation of Butylmethylimidazolium Chloride Ion Pairs in DMSO-Water Mixtures: A Comprehensive Examination via Molecular Dynamics Simulations and Potentials of Mean Force Analysis

Ionic liquids (ILs) with dimethyl sulfoxide (DMSO) and water act as a promising solvent medium for the dissolution of cellulose in an efficient manner. To develop a proper solvent system, it is really important to understand the thermodynamics of the molecular solutions consisting of ILs, DMSO, and water. The ion-pairing propensity of the ILs in the presence of DMSO and water plays a crucial role in governing the property of the solvent mixtures. Employing all-atom molecular dynamics simulations, we estimate the potentials of mean force between BMIM+ and Cl- ions in DMSO-water mixtures. Analysis reveals a significant increase in the thermodynamic stability of both contact ion pair (CIP) and solvent-assisted ion pair (SAIP) states with a rising DMSO mole fraction. Thermodynamic assessments highlight the entropic stabilization of CIP states and SAIP states in pure water, in DMSO-water mixtures, and in pure DMSO. The structural analysis reveals that in comparison to the DMSO local density, the local water density is relatively very high around ion pairs, more specifically in the solvation shell of a chloride ion. Preferential binding coefficients also consistently indicate exclusion of DMSO from the ion pair in DMSO-water mixtures. To enhance our understanding regarding the solvent molecules kinetics around the ion pairs, the survival probabilities of DMSO and water are computed. The calculations reveal that the water molecules prefer a prolonged stay in the solvation shell of Cl- ions.

Deciphering the Role of Anions of Ionic Liquids in Modulating the Structure and Stability of ct-DNA in Aqueous Solutions

Stabilizing biomolecules under ambient conditions can be extremely beneficial for various biological applications. In this context, the utilization of ionic liquids (ILs) in enhancing the stability and preservation of nucleic acids in aqueous solutions is found to be promising. While the role of the cationic moiety of ILs in the said event has been thoroughly explored, the importance of the anionic moiety in ILs, if any, is rather poorly understood. Herein, we examine the function of anions of ILs in nucleic acid stabilization by examining the stability and structure of calf thymus-DNA (ct-DNA) in the presence of various ILs composed of a common 1-ethyl-3-methylimidazolium cations (Emim+) and different anions, which includes Cl-, Br-, NO 3 - , Ac - , HS O 4 - and B F 4 - by employing various spectroscopic techniques as well as Molecular Dynamics (MD) simulation studies. Analysis of our data suggests that the chemical nature of anions including polarity, basicity, and hydrophilicity become an important factor in the overall DNA-IL interaction event. At lower concentrations, the interplay of intermolecular interaction between the IL anions with their respective cations and the solvent molecules becomes a very crucial factor in inducing their stabilizing effect on ct-DNA. However, at higher concentrations of ILs, the ct-DNA stabilization is additionally governed by specific-ion effect. MD simulation studies have also provided valuable insights into molecular-level understanding of the DNA-IL interaction event. Overall, the present study clearly demonstrated that along with the cationic moiety of ILs, the anions of ILs can play a significant role in deciding the stability of duplex DNA in aqueous solution. The findings of this study are expected to enhance our knowledge on understanding of IL-DNA interactions in a better manner and will be helpful in designing optimized IL systems for nucleic acid based applications.

Solid state ionics enabled ultra-sensitive detection of thermal trace with 0.001K resolution in deep sea

The deep sea remains the largest uncharted territory on Earth because it's eternally dark under high pressure and the saltwater is corrosive and conductive. The harsh environment poses great difficulties for the durability of the sensing method and the device. Sea creatures like sharks adopt an elegant way to detect objects by the tiny temperature differences in the seawater medium using their extremely thermo-sensitive thermoelectric sensory organ on the nose. Inspired by shark noses, we designed and developed an elastic, self-healable and extremely sensitive thermal sensor which can identify a temperature difference as low as 0.01 K with a resolution of 0.001 K. The sensor can work reliably in seawater or under a pressure of 110 MPa without any encapsulation. Using the integrated temperature sensor arrays, we have constructed a model of an effective deep water mapping and detection device.

Sweet, Sugar-Coated Hierarchical Platinum Nanostructures for Easy Support, Heterogenization and Separation

Metal nanoparticles are increasingly gaining interest in the field of heterogeneous catalysis. Here, we present a novel strategy for synthesizing sugar-coated platinum nanostructures (SC-Pt-NS) from the carbohydrates sucrose and D(-)-fructose. In the synthesis from a mixture of H2PtCl6·6H2O, the carbohydrate in an ionic liquid (IL) yielded primary particles of a homogeneous average size of ~10 nm, which were aggregated to hierarchical Pt nanostructures of ~40–65 nm and surrounded or supported by the carbohydrate. These sugar-coated platinum nanostructures present a facile way to support and heterogenize nanoparticles, avoid leaching and enable easier separation and handling. The catalytic activity of the SC-Pt-NS was shown in the hydrosilylation test reaction of phenylacetylene with triethylsilane, where very high turnover frequency (TOF) values of up to 87,200 h−1 could be achieved, while the platinum metal leaching into the product was very low.

Role of Ionic Liquids in Capillary Electrophoresis

Ionic liquids are a very important class of compounds due to their remarkable properties and wide range of applications. On the other hand, capillary electrophoresis is also gaining importance in separation science because of its fast speed and inexpensive nature. The use of ionic liquids in capillary electrophoresis is gaining importance continuously. The present review article describes the applications of ionic liquids in capillary electrophoresis. This article also describes the general aspects of ionic liquids and capillary electrophoresis. The use of ionic liquids in capillary electrophoresis, optimization of separation, mechanism of separation, and toxicity of ionic liquids, as well as their future perspectives, have also been discussed. It was observed that not much work has been performed in capillary electrophoresis using ionic liquids. It was also realized that the use of ionic liquids in capillary electrophoresis could revolutionize analytical science. Briefly, there is a great need for the use of ionic liquids in capillary electrophoresis for better and more effective separation.

Predicting the Thermodynamics of Ionic Liquids: What to Expect from PC-SAFT and COSMO-RS?

Two popular thermodynamic modeling frameworks, namely, the PC-SAFT equation of state and the COSMO-RS model, are benchmarked for their performance in predicting the thermodynamic properties of pure ionic liquids (ILs) and the solubility of CO₂ in ILs. The ultimate goal is to provide an illustration of what to expect from these frameworks when applied to ILs in a purely predictive way with established parametrization approaches, since the literature generally lacks their mutual comparisons. Two different modeling approaches with respect to the description of the molecular structure of ILs are tested within both models: a cation-anion pair as (i) a single electroneutral supermolecule and (ii) a pair of separately modeled counterions (ion-based approach). In general, we illustrate that special attention should be paid when estimating unknown thermodynamic data of ILs even with these two progressive thermodynamic frameworks. For both PC-SAFT and COSMO-RS, the supermolecule approach generally yields better results for the vapor pressure and the vaporization enthalpy of pure ILs, while the ion-based approach is found to be more suitable for the solubility of CO₂. In spite of some shortcomings, COSMO-RS with the supermolecule approach shows the best overall predictive capabilities for the studied properties. The ion-based strategy within both models has significant limitations in the case of the vaporization properties of ILs. In COSMO-RS, these limitations can, to a certain extent, be surpassed by additional quantum mechanical calculations of the ion pairing in the gas phase, while the ion-based PC-SAFT approach still needs a sophisticated improvement to be developed. As an initiating point, we explore one possible and simple route considering a high degree of cross associations between the counterions in the gas phase.

Antimicrobial and Cytotoxic Activity of Novel Imidazolium-Based Ionic Liquids

In this study, a series of 10 novel 1-methyl-3-octyloxymethylimidazolium derivatives carrying various anionic moieties (4-hydroxybenzenesulfonate, benzenesulfonate, carvacroloxyacetate, chloride, formate, propionate, thymoloxyacetate, vanillinoxyacetate, eugenoloxyacetate and trimethylacetate) were synthesized. Compounds were tested for their antimicrobial activity against six microbe strains (Staph-ylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Escherichia coli, Enterococcus faecalis, and Candida albicans), cytotoxic activity against the mouse melanoma cell line (B16 F10), and surface active properties. All synthesized compounds exhibited antimicrobial activity (expressed as minimum inhibitory concentration; in range of 0.10–27.82 mM/L), especially against Gram-positive bacteria and fungi. In addition, all compounds demonstrated cytotoxicity on B16 F10 cells (IC50 values 0.0101–0.0197 mM/L). Surface properties defined as CMC values, ranged from 0.72 to 32.35 mmol L-1. The obtained results provide an insight into the promising activity of a novel group of quaternary imidazolium derivatives having ionic liquid properties. The most potent compounds, containing a thymoloxyacetate and eugenoloxyacetate moiety, could be candidates for new antimicrobial agents or surfactants.

Insight into the inhibitory mechanism of soluble ionic liquids on the transport of TiO2 nanoparticles in saturated porous media: Roles of alkyl chain lengths and counteranion types

Column experiments were carried out to investigate the transport of TiO₂ nanoparticles (nTiO₂) in water-saturated porous media in the presence of various imidazolium-based ionic liquids (ILs) with different alkyl chain lengths and counteranions. The results indicated that the effects of ILs on nTiO₂ transport were considerably dependent upon IL species. In general, the transport-inhibition effects increased with the increasing length of branched alkyl chain on the ILs (i.e., [C₆mim]Cl > [C₄mim]Cl > [C₂mim]Cl). The trend was dominated by the hydrophobicity effects of ILs. Meanwhile, the inhibitory effects of ILs were strongly related to the counteranions and followed the order of [C₄mim]Cl > [C₄mim][TOS] > [C₄mim][PF₆], mainly due to different electrostatic repulsion force between nanoparticles and porous media in the presence of various ILs. Furthermore, the inhibitory role of [C₄mim][TOS] in nTiO₂ transport under acidic conditions (i.e., pH 6.5) was greater than that under alkaline conditions (i.e., pH 8.0). The dominant mechanism was that the differences in the extent of electrostatic repulsion between sand grains and nTiO₂ with or without ILs at pH 6.5 were larger than that at pH 8.0. Moreover, two-site kinetic retention model and DLVO theory provided good descriptions for the transport behaviors of nTiO₂ with different ILs.

Bis(trifluoromethylsulfonyl)imide Ionic Liquids Applied for Fine-Tuning the Cure Characteristics and Performance of Natural Rubber Composites

The goal of this work was to apply ionic liquids (ILs) with bis(trifluoromethylsulfonyl)imide anion (TFSI) for fine-tuning the cure characteristics and physico-chemical properties of elastomer composites based on a biodegradable natural rubber (NR) matrix. ILs with TFSI anion and different cations, such as alkylpyrrolidinium, alkylammonium, and alkylsulfonium cations, were applied to increase the efficiency of sulfur vulcanization and to improve the performance of NR composites. Thus, the influence of ILs on the vulcanization of NR compounds, as well as crosslink density and physical properties of NR vulcanizates, including tensile properties, thermal stability, and resistance to thermo-oxidative aging was explored. The activity of ILs seems to be strongly dependent on their cation. Pyrrolidinium and ammonium ILs effectively supported the vulcanization, reducing the optimal vulcanization time and temperature of NR compounds and increasing the crosslink density of the vulcanizates. Consequently, vulcanizates with these ILs exhibited higher tensile strength than the benchmark without IL. On the other hand, sulfonium ILs reduced the torque increment owing to the lower crosslinking degree of elastomer but significantly improved the resistance of NR composites to thermo-oxidation. Thus, TFSI ILs can be used to align the curing behavior and performance of NR composites for particular applications.

Ionic liquids for regulating biocatalytic process: Achievements and perspectives

Biocatalysis has found enormous applications in sorts of fields as an alternative to chemical catalysis. In the pursue of green and sustainable chemistry, ionic liquids (ILs) have been considered as promising reaction media for biocatalysis, owing to their unique characteristics, such as nonvolatility, inflammability and tunable properties as regards polarity and water miscibility behavior, compared to organic solvents. In recent years, great developments have been achieved in respects to biocatalysis in ILs, especially for preparing various chemicals. This review tends to give illustrative examples with a focus on representative chemicals production by biocatalyst in ILs and elucidate the possible mechanism in such systems. It also discusses how to regulate the catalytic efficiency from several aspects and finally provides an outlook on the opportunities to broaden biocatalysis in ILs.

Ion Dissociation in Ionic Liquids and Ionic Liquid Solutions

The extent to which cations and anions in ionic liquids (ILs) and ionic liquid solutions are dissociated is of both fundamental scientific interest and practical importance because ion dissociation has been shown to impact viscosity, density, surface tension, volatility, solubility, chemical reactivity, and many other important chemical and physical properties. When mixed with solvents, ionic liquids provide the unique opportunity to investigate ion dissociation from infinite dilution in the solvent to a completely solvent-free state, even at ambient conditions. The most common way to estimate ion dissociation in ILs and IL solutions is by comparing the molar conductivity determined from ionic conductivity measurements such as electrochemical impedance spectroscopy (EIS) (which measure the movement of only the charged, i.e., dissociated, ions) with the molar conductivity calculated from ion diffusivities measured by pulse field gradient nuclear magnetic resonance spectroscopy (PFG-NMR, which gives movement of all of the ions). Because the NMR measurements are time-consuming, the number of ILs and IL solutions investigated by this method is relatively limited. We have shown that use of the Stokes-Einstein equation with estimates of the effective ion Stokes radii allows ion dissociation to be calculated from easily measured density, viscosity, and ionic conductivity data (ρ, η, λ), which is readily available in the literature for a much larger number of pure ILs and IL solutions. Therefore, in this review, we present values of ion dissociation for ILs and IL solutions (aqueous and nonaqueous) determined by both the traditional molar conductivity/PFG-NMR method and the ρ, η, λ method. We explore the effect of cation and anion alkyl chain length, structure, and interaction motifs of the cation and anion, temperature, and the strength of the solvent in IL solutions.

BAILs mediated Catalytic Thermo Liquefaction (CTL) process to convert municipal solid waste into carbon densified liquid (CTL-Oil)

Continual increase in municipal solid waste (MSW) posing global environmental challenge which directed focus towards the waste to energy to achieve dual goal of waste minimization and energy generation. The present manuscript introducing Bronsted acid ionic liquids (BAILs) mediated Catalytic Thermo Liquefaction (CTL) process for conversion of MSW into carbon densified liquid (CTL-Oil) which can be used for multiple energy and fuel applications. BAILs with different counter ions were synthesized and tested for CTL of wet organic biodegradable MSW. The exploration of BAILs provides significant benefits in terms of operating conditions (120 °C, 90 min) with zero char and gases. Of the synthesized catalysts [Benz-SO₃HIm]⁺[H₂PO₄]^-,[Benz-SO₃Him]⁺[HSO₄]^-_,[Benz-SO₃HIm]⁺[TsO]^-and [BenzSO₃HIm]⁺[TfO]^-, BAIL with [HSO₄]^-counter ion showed a profound effect on CTL. The intensified CTL process resulted in > 85% MSW conversion with > 80% yield of CTL-Oil without any char and gas formation. Use of BAILs assisted the ease of dissolution and hydrolysis of biomass to produce CTL-Oil via hydrolysis, condensation, cyclization and dehydration reactions. The plausible mechanism for CTL has been proposed. The physicochemical analysis of CTL-Oil was conducted by using elemental analysis, Bomb calorimeter, GC-MS and ATR-FTIR. It was found that the CTL-Oil was rich source of C (48-55%), H (6-8%), O (30-41%) containing compounds such as long-chain hydrocarbons, carboxylic acids, heterocyclic compounds, aldehydes, ketones and esters, etc. Furthermore, the calorific value of CTL-Oil was found to be 20-23 MJ/kg, thus it can be explored for multiple energy and fuel applications. However, the CTL process also adds several environmental and process economic benefits over the conventional waste liquefaction/disposal processes.

Electrical and Electrochemical Behavior of Carbon Paste Electrodes Modified with Ionic Liquids Based in N-Octylpyridinium Bis(Trifluoromethylsulfonyl)Imide. A Theoretical and Experimental Study

In this work, we studied carbon paste electrodes (CPEs) with two kinds of binders: mineral oil or ionic liquids (IL) derived from N-substituted octyl pyridinium bis(trifluoromethylsulfonyl)imide with the substituents H-, CH₃-, CN- and CF₃-. The work aims to study this series of IL and determine a possible effect of the substituent of the cation in the behavior of the IL as a binder of graphite for obtaining IL-CPEs. The electrochemical response and the electrical behavior were measured by cyclic voltammetry and electrochemical impedance spectroscopy, respectively. Surprisingly, the substituent does not affect the cyclic voltammetry response because in all the cases, high resistance and high capacitive currents were obtained. The best response in terms of conductivity is obtained by CPE. In the case of impedance measurements, the substituent does not cause differences, and in all the cases, the IL-CPEs show nearly the same responses. CPE shows lower capacitance and higher resistance for diffusion compared to the IL-CPEs due to his lower porosity. The high resistance showed by the IL-CPEs by cyclic voltammetry can be attributed to poorly intermolecular forces among graphite, water, electrolyte, and ILs as demonstrated by theoretical calculations.

Influence of Water on Structure, Dynamics, and Electrostatics of Hydrophilic and Hydrophobic Ionic Liquids in Charged and Hydrophilic Confinement between Mica Surfaces

Water is ubiquitous in the environment and is the origin for operational constraints in ionic-liquid based electrolytes for supercapacitors. In this study, the influence of water on the interfacial behavior of hydrophilic (1-ethyl-3-methylimidazolium ethylsulfate, abbr. [EMIM][EtSO₄]) and hydrophobic (1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, abbr. [EMIM][FAP] and [EMIM][TFSI], respectively) ionic liquids (ILs) confined between mica surfaces was investigated at separations precisely modulated by a surface force apparatus and at controlled relative humidity between 0% and 50% RH. Diffusion experiments revealed that water spontaneously invades the nanoconfined ILs above a certain humidity threshold and that the confined hydrophobic IL is completely replaced by water at sufficiently high environmental humidity (∼45% here) as a result of surface-induced phase separation. This behavior is expected to be universal for other ILs that are not fully miscible with water when they are confined in hydrophilic nanopores of a few nanometers in width. The effect of environmental humidity on interfacial structure, dynamics, and electrostatics was studied via dynamic force measurements. In the dry state, several layers of ions are immobilized on the mica surface, and the effective viscosity increases by up to 2 orders of magnitude with a decrease in film thickness from ∼10 to ∼3 nm. Based on recent work, it is proposed that nanoconfinement enhances the anion-cation association in highly concentrated electrolytes, thereby justifying the loss of fluidity of the ILs. When phase separation is excluded, water is intercalated in the layered structure of the three ILs, and it leads to a change of the layer thickness compared to the dry state. Furthermore, our results reveal that interfacial water prevents ions from being immobilized on the surface and facilitates the outflow of both hydrophilic and hydrophobic ILs by reducing their effective viscosity in the order [EMIM][FAP] < [EMIM][TFSI] < [EMIM][EtSO₄]. The underlying mechanisms are evaluated by considering the roles of water in enhancing ion dissociation through screening of electrostatic interactions and solvation of the selected ILs to different extents. The discussed experimental observations support the recent discoveries made by molecular dynamic simulations and neutron scattering studies that using hydrophilic ILs coupled with water as cosolvent could lead to the enhanced power density of IL-based supercapacitors, and therefore, that water-in-(hydrophilic) ILs is a direction worth exploring as electrolytes for supercapacitors.

Molecular Dynamics Study of the Effect of Water on Hydrophilic and Hydrophobic Ionic Liquids

We performed molecular dynamics (MD) simulations of ionic liquid (IL)-water mixtures to investigate the effects of water addition. The IL cation 1-butyl-3-methylimidazolium ([C₄mim]) and the four anions, nitrate (NO₃), tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethanesulfonyl)imide (NTf₂), were used to examine the effects of differences in hydrophobicity and anion size. The radial distribution functions of water-water have two different water content dependences. In NO₃ and BF₄ systems, the effect of water-anion-water structures connected by hydrogen bonds due to the strong interaction of anion-water is large. The growth of water clusters changes the peak heights of the radial distribution functions in PF₆ and NTf₂ systems. The increase in the diffusion constant is small in the NO₃ system but is not small in the other systems. The relaxation time of the anion-water hydrogen bonds in the NO₃ system is much longer than those in the other systems. It is the reason for the low water content dependency of the diffusion constants of the NO₃ system. The water constant dependences of structures in NO₃ and BF₄ systems are similar, but that in the diffusion constant is not. The BF₄ system shows hydrophilic features in the structural change and hydrophobic features in the water content dependences of the diffusion constant. The addition of water molecules provides various hydrophobicity/hydrophilicity of anions.

Heme Dissociation from Myoglobin in the Presence of the Zwitterionic Detergent N,N-Dimethyl-N-Dodecylglycine Betaine: Effects of Ionic Liquids

We have investigated myoglobin protein denaturation using the zwitterionic detergent Empigen BB (EBB, N,N-Dimethyl-N-dodecylglycine betaine). A combination of absorbance, fluorescence, and circular dichroism spectroscopic measurements elucidated the protein denaturation and heme dissociation from myoglobin. The results indicated that Empigen BB was not able to fully denature the myoglobin structure, but apparently can induce the dissociation of the heme group from the protein. This provides a way to estimate the heme binding free energy, ΔG_dissociation. As ionic liquids (ILs) have been shown to perturb the myoglobin protein, we have investigated the effects of the ILs 1-butyl-3-methylimidazolium chloride (BMICl), 1-ethyl-3-methylimidazolium acetate (EMIAc), and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF₄) in aqueous solution on the ΔG_dissociation values. Absorbance experiments show the ILs had minimal effect on ΔG_dissociation values when compared to controls. Fluorescence and circular dichroism data confirm the ILs have no effect on heme dissociation, demonstrating that low concentrations ILs do not impact the heme dissociation from the protein and do not significantly denature myoglobin on their own or in combination with EBB. These results provide important data for future studies of the mechanism of IL-mediated protein stabilization/destabilization and biocompatibility studies.

Counteranion-dependent sorption of imidazolium- and benzimidazolium-based ionic liquids by soot

Sorption of ionic liquids (ILs) to soil and porous materials as affected by anions was observed, but scarce effort has been focused on addressing the role of counteranions in sorption and the associated underlying mechanisms. In this work, two series of 1-butyl-3-methylimidazolium- (Bmim-) and N-butyl, methyl-benzimidazolium-based (Bmbim-based) ILs coupled with different counteranions were prepared to investigate the effect of anions on IL sorption by soot. The octanol-water partition coefficient (K_ow) and the ion-pair formation constant at infinite dilution in water (K_IP^°) of ILs were independently measured to explore the contribution of counteranion-dependent hydrophobicity and ion-pair. A wide range of sorption coefficients (K_d) of ILs were achieved with values varying from 59.8 to 344.3 L·kg^-1 for Bmbim-based ILs and from 253.4 to 489.7 L kg^-1 for Bmbim-based ILs. Compared with other anions, bis(trifluoromethanesulphonyl)imide ([Tf₂N]^-) and hexafluorophosphate ([PF₆]^-) exhibit tighter association with IL cations in aqueous solution due to their larger K_ow and higher K_IP^°. Positive linear relationships between log K_IP^° and K_d and between log K_ow and K_d evidenced that the counteranion-dependent sorption of ILs relies on the association strengths of IL cations and counteranions, which further influence the hydrophobicity/hydrophilicity of ion pairs. Compared with that of strongly coordinating anions (such as [CH₃SO₃]^-, [CF₃COO]^-, [BF₄]^-, [CF₃SO₃]^-, and [Cl]^-), the addition of weakly coordinating anions (such as [Tf₂N]^- and [PF₆]^-) in solution contributes to markedly large sorption enhancement of ILs. Consequently, the contribution of different counteranions on IL sorption is essentially based on the formation of ion pair with different K_IP^° and K_ow in aqueous solution.

Effect of molecular solvents of varying polarity on the self-assembly of 1-n-dodecyl-3-methylimidazolium octylsulfate ionic liquid

Large-scale molecular dynamics simulations consisting of more than 88,000–106,000 atoms for approximately 250 ns (including equilibration and production) were conducted to assess the effect of polar, nonpolar and amphiphilic molecular solvents on the nanoscale structuring of 1-[Formula: see text]-dodecyl-3-methylimidazolium [C[Formula: see text]mim] octylsulfate [C8SO4] ionic liquid (IL). Water [H2O], [Formula: see text]-octane [C8H[Formula: see text]] and 1-octanol [C8H[Formula: see text]OH] are employed as examples of polar, nonpolar, and amphiphilic molecules, respectively. The results indicate that each of these molecular solvents modify the nanosegregation behavior of the ionic liquid in a unique way. Water induces a high order of structuring of the ionic liquid as indicated by extremely high nematic order parameter for the system. In addition, the morphology of the neat ionic liquid is transformed from layer-like to that of bilayer-like in which the polar and nonpolar domains alternate. The presence of water also causes the stretching of the nonpolar domain, thus, increasing its size. At the concentration examined in this work, [Formula: see text]-octane is found to be only partially miscible with the ionic liquid. The polar network is maintained; however, the continuous cationic nonpolar domain is split into multiple domains. [Formula: see text]-octane is accommodated in the ionic liquid nonpolar domain. Similarly, the amphiphilicity of 1-octanol leads to an increase in the number of cationic as well as anionic domains. The overall nonpolar domain length, however, remains nearly identical to that found for the pure ionic liquid. Additional characterization of structural features of the three systems is discussed in terms of one-dimensional number densities, nematic order parameters for the overall systems and their components and structure factors.