Broadband Dielectric Relaxation Study at Ambient and Elevated Pressure of Molecular Dynamics of Pharmaceutical: Indomethacin

Variation of Activation Volume as an Indicator of the Difference in Clusterization Phenomenon Induced by H-Bonding and F-Π Stacking Interactions in Enantiomers and a Racemate of Flurbiprofen

In this paper, X-ray diffraction (XRD), differential scanning calorimetry (DSC), broadband dielectric (BDS), and Fourier transform infrared (FTIR) spectroscopy supported by molecular dynamics (MD) simulations and quantum chemical computations were applied to investigate the structural and thermal properties, molecular dynamics, and H-bonding pattern of R-, S-, and RS-flurbiprofen (FLP). Experimental data indicated various spatial molecular arrangements in crystalline forms of examined systems, which seemed to disappear in the liquid state. Surprisingly, deeper analysis of high-pressure dielectric data revealed unexpected variation in the activation volume of pure enantiomers and a racemate. MD simulations showed that it is an effect of the clusterization phenomenon and a higher population of small associates in the former samples. Moreover, theoretical consideration exposed the particular role of unspecific F-Π interactions as a driving force underlying local molecular arrangements of molecules in the liquid and the crystal lattice of R-, S-, and RS-FLP.

Influence of water and trehalose on α- and β-relaxation of freeze-dried lysozyme formulations

Molecular mobility in form of alpha and beta relaxations is considered crucial for characterization of amorphous lyophilizates and reflected in the transition temperatures Tgα and Tgβ. Based on an overview of applied methods to study beta relaxations, Dynamic Mechanical analysis was used to measure Tgα and Tgβ in amorphous freeze-dried samples. Lysozyme and trehalose as well as their mixtures in varying ratios were investigated. Three different residual moisture levels, ranging from roughly 0.5-7 % (w/w), were prepared via equilibration of the freeze-dried samples. Known plasticising effects of water on Tgα were confirmed, also via differential scanning calorimetry. In addition and contrary to expectations, an influence of water on the Tgβ also was observed. On the other hand, an increasing amount of trehalose lowered Tgα but increased Tgβ showing that Tgα and Tgβ are not paired. The findings were interpreted with regard to their underlying molecular mechanisms and a correlation with the known influences of water and trehalose on stability. The results provide encouraging hints for future stability studies of freeze-dried protein formulations, which are urgently needed, not least for reasons of sustainability.

Highly stable petroleum pitches provide access to the deep glassy state

Differential scanning calorimetry (DSC) was used to study the fast aging behavior of two petroleum pitch materials despite being only three to five years old. We observe that these highly aromatic pitches with broad distributions of both molecular weight and aromaticity exhibit large enthalpic relaxation endotherms in initial DSC heating scans, and 20-32 °C reductions in the fictive temperature and 0.35-0.87 of θK, which are indicative of aged glasses similar to ultrastable glasses and 20 MA aged amber. Quantifying the degree of thermodynamic stability relative to the Kauzmann temperature vs. the aging time demonstrates that these materials age just as quickly as low fragility metallic glasses. Additionally, we observe that pitches age faster than polymers reported in the literature when compared using down-jump experiments. We hypothesize that the fraction of higher aromaticity of pitch molecules plays a crucial role in faster dynamics. The unique aging behavior and the ability to produce pitches in bulk quantities using pilot-scale equipment, while being possible to tailor their molecular composition, make them a useful material for studying complex aging dynamics in the deep glassy state.

Complementarity of mDSC, DMA, and DRS Techniques in the Study of Tg and Sub-Tg Transitions in Amorphous Solids: PVPVA, Indomethacin, and Amorphous Solid Dispersions Based on Indomethacin/PVPVA

Recently, glasses, a subset of amorphous solids, have gained attention in various fields, such as polymer chemistry, optical fibers, and pharmaceuticals. One of their characteristic features, the glass transition temperature (T_g) which is absent in 100% crystalline materials, influences several material properties, such as free volume, enthalpy, viscosity, thermodynamic transitions, molecular motions, physical stability, mechanical properties, etc. In addition to T_g, there may be several other temperature-dependent transitions known as sub-T_g transitions (or β-, γ-, and δ-relaxations) which are identified by specific analytical techniques. The study of T_g and sub-T_g transitions occurring in amorphous solids has gained much attention because of its importance in understanding molecular kinetics, and it requires the combination of conventional and novel characterization techniques. In the present study, three different analytical techniques [modulated differential scanning calorimetry (mDSC), dynamic mechanical analysis (DMA), and dielectric relaxation spectroscopy (DRS)] were used to perform comprehensive qualitative/quantitative characterization of molecular relaxations, miscibility, and molecular interactions present in an amorphous polymer (PVPVA), a model drug (indomethacin, IND), and IND/PVPVA-based amorphous solid dispersions (ASDs). This is the first ever reported DMA study on PVPVA in its powder form, which avoids the contribution of solvent to the mechanical properties when a self-standing polymer film is used. A good correlation between the techniques in determining the T_g value of PVPVA, IND, and IND/PVPVA-based ASDs is established, and the negligible difference (within 10 °C) is attributed to the different material properties assessed in each technique. However, the overall T_g behavior, the decrease in T_g with increase in drug loading in ASDs, is universally observed in all the above-mentioned techniques, which reveals their complementarity. DMA and DRS techniques are used to study the different sub-T_g transitions present in PVPVA, amorphous IND, and IND/PVPVA-based ASDs because these transitions are normally too weak or too broad for mDSC to detect. For IND/PVPVA-based ASDs, both techniques show a shift of sub-T_g transitions (or secondary relaxation peaks) toward the high-temperature region from -140 to -45 °C. Thus, this paper outlines the usage of different solid-state characterization techniques in understanding the different molecular dynamics present in the polymer, drug, and their interactions in ASDs with the integrated information obtained from individual techniques.

Predicting Dielectric and Shear-Rheology Properties of Glass-Forming Pharmaceutical Liquids from Each Other: Applications and Limitations

Acetaminophen, nicotine, and lidocaine hydrochloride were investigated in their deeply supercooled liquid states using oscillatory shear rheology. The mechanical spectra of these drugs are presented in modulus, compliance, as well as fluidity formats. Their frequency profiles can be described via models adapted from the field of charge transport. Inspired by the success of this approach, the Barton-Nakajima-Namikawa relation, best known from the same field, was also tested. When adapted to rheology, this approach interrelates static and dynamic characteristics of viscous flow and was found to work excellently. The temperature dependence of the characteristic shear frequencies was checked against the shoving model, which relates them to the temperature-dependent instantaneous shear modulus and acceptable agreement was found. Combined with shear mechanical literature data on ibuprofen and indomethacin, a modified version of the phenomenological model by Gemant, DiMarzio, and Bishop (GDB) was employed to successfully predict the shape and amplitude of the dielectric spectra for all studied liquids, except for lidocaine hydrochloride. For the latter, the modified GDB model is suggested to aid in mapping out the reorientational part of the dielectric response, while the experimental results are strongly superimposed by ionic conduction phenomena. The reverse transformation, the calculation of rheological spectra based on dielectric ones, is also successfully demonstrated. For the example of acetyl salicylic acid, it is shown how dielectric spectra can be used to even predict rheological ones. The limits of the central parameter governing these mutual transformations, the electroviscoelastic material constant, and indications for its correlation with the dielectric relaxation strength are discussed. For pharmaceuticals characterized by a strong dynamical decoupling of the electrical from the mechanical degrees of freedom, the modified GDB model is not expected to be applicable.

The relaxation behavior of supercooled and glassy imidacloprid

Employing dielectric spectroscopy, oscillatory shear rheology, and calorimetry, the present work explores the molecular dynamics of the widely used insecticide imidacloprid above and below its glass transition temperature. In its supercooled liquid regime, the applied techniques yield good agreement regarding the characteristic structural (alpha) relaxation times of this material. In addition, the generalized Gemant-DiMarzio-Bishop model provides a good conversion between the frequency-dependent dielectric and shear mechanical responses in its viscous state, allowing for an assessment of imidacloprid's molecular hydrodynamic radius. In order to characterize the molecular dynamics in its glassy regime, we employ several approaches. These include the application of frequency-temperature superposition (FTS) to its isostructural dielectric and rheological responses as well as use of dielectric and calorimetric physical aging and the Adam-Gibbs-Vogel model. While the latter approach and dielectric FTS provide relaxation times that are close to each other, the other methods predict notably longer times that are closer to those reflecting a complete recovery of ergodicity. This seemingly conflicting dissimilarity demonstrates that the molecular dynamics of glassy imidacloprid strongly depends on its thermal history, with high relevance for the use of this insecticide as an active ingredient in technological applications.

High-Drug-Loading Amorphous Solid Dispersions via In Situ Thermal Cross-Linking: Unraveling the Mechanisms of Stabilization

This article takes a step forward in understanding the mechanisms involved during the preparation and performance of cross-linked high-drug-loading (HDL) amorphous solid dispersions (ASDs). Specifically, ASDs, having 90 wt % poorly water-soluble drug indomethacin (IND), were prepared via in situ thermal cross-linking of poly(acrylic acid) (PAA) and poly(vinyl alcohol) (PVA) and thoroughly evaluated in terms of physical stability and in vitro supersaturation. Results showed that HDL ASDs having excellent active pharmaceutical ingredient (API) amorphous stability and prolonged in vitro supersaturation were prepared by fine tuning the cross-linking procedure. Unraveling of the processes involved during ASD's formation shed light on the significant role of the cross-linking conditions (i.e., temperature and time), the physicochemical properties of the API, and the hydrolysis level of the cross-linker as key factors in modulating ASD's stability. In-depth analysis of the prepared systems revealed the (1) reduction of API's molecular motions within the cross-linked polymeric networks (through API's strong spatial confinement), (2) the structural changes in the prepared cross-linked matrices (induced by the high API drug loading), and (3) the tuning of the cross-linking density via utilization of low-hydrolyzed PVA as the major mechanisms responsible for ASD's exceptional performance. Complementary analysis by means of molecular dynamics simulations also highlighted the vital role of strong drug-polymer intermolecular interactions evolving among the ASD components. Overall, the impression of the complexity of in situ cross-linked ASDs has been reinforced with the excessive variation of parameters investigated in the current study, offering thus insights up to the submolecular level to lay the groundwork and foundations for the comprehensive assessment of a new emerging class of HDL amorphous API formulations.

How does pressure affect the molecular dynamics, intramolecular interactions, and the relationship between structural (α) and secondary (JG-β) relaxation above and below the glass transition temperature in binary mixtures of H-bonded API - probucol and acetylated saccharides?

In this paper, the molecular dynamics as well as inter- and intramolecular interactions in the homogenous solid dispersions (SDs) of active pharmaceutical ingredient - probucol (PRO) with acetylated glucose (acGLU), acetylated sucrose (acSUC), and sucrose acetoisobutyrate (aibSUC), prepared in 5:1 molar ratio, have been investigated using broadband dielectric (BD) and Fourier transform infrared (FTIR) spectroscopy. Importantly, high pressure dielectric measurements revealed that as for neat PRO, a breakdown of the isochronal structural (α) and JG-β exact superpositioning, due to increasing separation between both processes under compression, can also be detected in its mixtures with acetylated saccharides (acSACCHs). Furthermore, the analysis of temperature dependences of JG-β-relaxation times for PRO and PRO-acSACCH SDs at selected isobaric conditions indicated the increase in the cooperativity of the secondary process (reflected in the value of the activation entropy, ΔS_β) at elevated pressure in all systems. The mere addition of the small amount of excipient to neat PRO (p = 0.1 MPa) resulted in a greater value of ΔS_β (it was the most noticeable in the case of aibSUC). Further FTIR studies carried out on the pressure densified glasses of PRO, and binary mixtures suggested that the observed changes in the cooperativity of the JG-β-process, as well as the failure of the exact isochronal superpositioning of α- and JG-β relaxation times, are due to varying H-bond pattern in the examined single- and two-component systems at high compression/in the presence of saccharide.

Rheology based estimates of self- and collective diffusivities in viscous liquids

The self-diffusion coefficient of viscous liquids is estimated on the basis of a simple analysis of their rheological shear spectra. To this end, the Almond-West approach, previously employed to access single-particle diffusivities in ionic conductors, is generalized for application to molecular dynamics in supercooled liquids. Rheology based estimates, presented for indomethacin, ortho-terphenyl, and trinaphthylbenzene, reveal relatively small, yet systematic differences when compared with diffusivity data directly measured for these highly viscous liquids. These deviations are discussed in terms of mechanical Haven ratios, introduced to quantify the magnitude of collective translational effects that have an impact on the viscous flow.

Block copolymers based on poly(butylene adipate) and poly(L-lactic acid) for biomedical applications: synthesis, structure and thermodynamical studies

This work describes the synthesis of poly(butylene adipate) (PBAd), by melt polycondensation, poly(l-lactic acid) (PLLA), by ring opening polymerization, and the new block copolymer PLLA/PBAd in ratios 90/10, 95/5, 75/25 and 50/50. Due to the biocompatibility and low toxicity of neat PBAd and PLLA, these copolymers are suitable to be used in biomedical applications. The 1H and 13C nuclear magnetic resonance spectroscopy techniques were employed for structural characterization. The thermal transitions, with an emphasis on crystallization, were assessed by differential scanning calorimetry, supplemented by X-ray diffraction and polarized optical microscopy. Molecular mobility studies were conducted using two advanced techniques, broadband dielectric spectroscopy and thermally stimulated depolarization currents. The results from the structural techniques, in combination with each other, provided proof of the presence of PLLA and PBAd blocks and, moreover, the successful copolymer synthesis. The overall data showed that the different co-polymer compositions result directly in severe changes in the polymer crystal distribution and, indirectly, the formation of PBAd micro/nano domains surrounded by PLLA. Furthermore, it was demonstrated that both the continuity of the two polymers throughout the copolymer volume and the semicrystalline morphology can be tuned to a wide extent. The latter makes these systems quite promising envisaging biomedical applications, including the encapsulation of small molecules, e.g. drug solutions. The molecular mobility map was constructed for these systems for the first time, revealing the local (short scale) and segmental (larger nm scale) mobility of PBAd and PLLA, as well as intermediate behaviors of the copolymers.

β-Relaxation and Crystallization Behaviors in a Pulse-Current-Thermoplastic-Formed La-Based Bulk Metallic Glass

We use the pulse current thermoplastic forming technique based on joule heating to rejuvenate the atomic structure of a La₆₂Al₁₄Ag_2.34Ni_10.83Co_10.83 bulk metallic glass (BMG). The pulse-formed sample exhibits more pronounced β-relaxation than the as-cast one due to the increased free volume. Instead, the sub-T_g annealing clearly weakens the β-relaxation and also makes it more isolated from the α-relaxation, showing contributions from free volume and preferred structure. However, both treatments exhibit little influence on the following α-relaxation and high temperature crystallization kinetics. Our results open an effective way to rejuvenate the structure of BMGs and provide an in-depth understanding of the relationship between structural relaxations and crystallization kinetics of BMGs.

Isochronal Conditions-The Key To Maintain the Given Solubility Limit, of a Small Molecule within the Polymer Matrix, at Elevated Pressure

In this work, we proposed the method to maintain the desired level of drug's solubility within the polymer matrix by adjusting conditions to uphold the same molecular dynamics of the system (e.g., temperature for set elevated pressure or vice versa). Namely, we observed, that recrystallization of the drug from the supersaturated drug-polymer system, initiated for the same structural relaxation time of the sample (τα-1) ceases when certain, different than the initial, molecular mobility of the systems is reached (τα-2)-regardless of a given combination of temperature and pressure conditions. Based on the presented results, one can conclude that the molecular dynamics seem to control the process of recrystallization of the excess amount of solute from the supersaturated solution (e.g., small molecules dissolved within the polymer). Therefore, it appears that the elevated pressure compensates the effect of solubility enhancement caused by the elevated temperature. Such information not only is of fundamental relevance in science but also, from a much broader perspective, could be potentially very useful considering extrusion-based manufacturing methods.

Influence of Annealing in the Close Vicinity of Tg on the Reorganization within Dimers and Its Impact on the Crystallization Kinetics of Gemfibrozil

In this paper, broadband dielectric spectroscopy (BDS) has been applied to study the molecular dynamics and crystallization kinetics of the antihyperlipidemic active pharmaceutical ingredient (API), gemfibrozil (GEM), as well as its deuterated (dGEM) and methylated (metGEM) derivatives, characterized by different types and strengths of intermolecular interactions. Moreover, calorimetric and infrared measurements have been carried out to characterize the thermal properties of examined samples and to probe a change in the H-bonding pattern in GEM, respectively. We found that the dielectric spectra of all examined compounds, collected below the glass transition temperature (T_g), reveal the presence of two secondary relaxations (β, γ). According to the coupling model (CM) predictions, it was assumed that the slower process (β) is of JG type, whereas the faster one (γ) has an intramolecular origin. Interestingly, the extensive crystallization kinetics measurements performed after applying two paths, i.e., the standard procedure (cooling and subsequently heating up to the appropriate temperature, T_c), as well as annealing at two temperatures in the vicinity of T_g and further heating up to T_c, showed that the annealing increases the crystallization rate in the case of native API, while the thermal history of the sample has no significant impact on the pace of this process in the two derivatives of GEM. Analysis of the dielectric strength (Δε) of the α-process during annealing, together with the results of Fourier transform infrared spectroscopy (FTIR) measurements, suggested that the reorganization within dimeric structures formed between the GEM molecules is responsible for the observed behavior. Importantly, our results differ from those obtained by Tominaka et al. (Tominaka, S.; Kawakami, K.; Fukushima, M.; Miyazaki, A.Physical Stabilization of Pharmaceutical Glasses Based on Hydrogen Bond Reorganization under Sub-T_g Temperature Mol. Pharm. 2017 14 264 273 10.1021/acs.molpharmaceut.6b00866.), who demonstrated that the sub-T_g annealing of ritonavir (RTV), which is able to form extensive supramolecular hydrogen bonds, protects this active substance against crystallization. Therefore, based on these contradictory reports, one can hypothesize that materials forming H-bonded structures, characterized by varying architecture, may behave differently after annealing in the vicinity of the glass transition temperature.

Organic glasses with tunable liquid-crystalline order through kinetic arrest of end-over-end rotation: the case of saperconazole

Liquid crystals (LCs) undergo fast phase transitions, almost without hysteresis, leading to the notion that it is difficult to bypass LC transitions. However, recent work on itraconazole has shown that a nematic-to-smectic phase transition can be frustrated or avoided at moderate cooling rates. At each cooling rate, the highest smectic order obtained is determined by the kinetic arrest of the end-over-end molecular rotation. We report that the same phenomenon occurs in the system saperconazole, an analog of itraconazole where each of the two Cl atoms is replaced by F. Saperconazole has a wider temperature range over which smectic order can develop before kinetic arrest, providing a stronger test of the previous conclusion. Together these results indicate a general principle for controlling LC order in organic glasses for electronic applications.

Surface-Bulk Interplay in Vapor-Deposited Glasses: Crossover Length and the Origin of Front Transformation

Thin film stable glasses transform into a liquid by a moving front that propagates from surfaces or interfaces with higher mobility. We use calorimetric data of vapor-deposited glasses of different thicknesses and stabilities to identify the role of glassy and liquid dynamics on the transformation process. By invoking the existence of an ultrathin intermediate layer whose transformation strongly depends on the properties of both the liquid and the glass, we show that the recovery to equilibrium is driven by the mismatch in the dynamics between glass and liquid. The lifetime of this intermediate layer associated with the moving front is the geometric mean between the bulk transformation time and the alpha relaxation time. Within this view, we explain the observed dependencies of the growth front velocity and the crossover length with both stability and temperature. Extrapolation of these results points towards ordinary thin film glasses transforming via a frontlike transformation mechanism if heated sufficiently fast, establishing a close connection between vapor-deposited and liquid-cooled glasses.

How does the high pressure affects the solubility of the drug within the polymer matrix in solid dispersion systems

In this paper, we employed Broadband Dielectric Spectroscopy (BDS) in order to determine the effect of the high pressure on the solubility limits of the amorphous flutamide within Kollidon VA64 matrix. In order to achieve this goal, drug-polymer systems have been examined: (i) at ambient pressure and both isothermal and nonisothermal conditions by means of BDS as well as Differential Scanning Calorimetry (DSC), to validate proposed method; (ii) at high pressure conditions (20 and 50 MPa) and elevated temperatures (343 K, 353 K and 363 K) by means of dielectric spectroscopy. Our studies revealed that regardless of applied pressure the solubility of the flutamide within the co-polymer matrix increases with increasing temperature at isobar conditions. Moreover, our results clearly indicate that with increasing pressure the solubility of the drug within the polymer matrix is decreasing at isothermal conditions. Therefore, during the solubility limit studies one should consider the situation in which by increasing the pressure (at constant temperature) would achieve an effect similar to the lowering of the temperature (at constant pressure).

The race to the bottom: approaching the ideal glass?

Key to resolving the scientific challenge of the glass transition is to understand the origin of the massive increase in viscosity of liquids cooled below their melting temperature (avoiding crystallisation). A number of competing and often mutually exclusive theoretical approaches have been advanced to describe this phenomenon. Some posit a bona fide thermodynamic phase to an 'ideal glass', an amorphous state with exceptionally low entropy. Other approaches are built around the concept of the glass transition as a primarily dynamic phenomenon. These fundamentally different interpretations give equally good descriptions of the data available, so it is hard to determine which-if any-is correct. Recently however this situation has begun to change. A consensus has emerged that one powerful means to resolve this longstanding question is to approach the putative thermodynamic transition sufficiently closely, and a number of techniques have emerged to meet this challenge. Here we review the results of some of these new techniques and discuss the implications for the existence-or otherwise-of the thermodynamic transition to an ideal glass.

Changes in Physical Stability of Supercooled Etoricoxib after Compression

In the case of formulations with amorphous active pharmaceutical ingredients the risk of pressure-induced recrystallization should be carefully considered. We reported here that supercooled etoricoxib (ETB), which was found as a relatively stable system with low crystallization tendency at atmospheric pressure, crystallized quickly after compression. The observed strong pressure-dependence of the induction period suggests that during compression the first step of crystallization that is nucleation may be accelerated. To overcome the experimental challenge associated with studies at elevated temperatures and high pressures we applied broadband dielectric spectroscopy. Dielectric measurements gave us detailed insight into crystallization kinetics of ETB at varying ( T, p) conditions corresponding to the supercooled liquid state of a drug. We found that pressure-induced recrystallization of supercooled ETB, constituting a serious impediment from a technological point of view, can be efficiently inhibited when amorphous solid dispersion containing ETB and polymer polyvinylpyrrolidone PVP (10% w/w) was prepared. Besides, we performed the comprehensive analysis of molecular dynamics of both systems at elevated pressure to address some fundamental issues related to the pressure sensitivity of their supercooled dynamics.

Organic Glasses with Tunable Liquid-Crystalline Order

Liquid crystals (LCs) are known to undergo rapid ordering transitions with virtually no hysteresis. We report a remarkable counterexample, itraconazole, where the nematic to smectic transition is avoided at a cooling rate exceeding 20  K/s. The smectic order trapped in a glass is the order reached by the equilibrium liquid before the kinetic arrest of the end-over-end molecular rotation. This is attributed to the fact that smectic ordering requires orientational ordering and suggests a general condition for preparing organic glasses with tunable LC order for electronic applications.

Atorvastatin as a Promising Crystallization Inhibitor of Amorphous Probucol: Dielectric Studies at Ambient and Elevated Pressure

The aim of this article was to check the physical stability of the amorphous form of probucol at both standard storage and manufacturing conditions. Our studies clearly show that disordered form of the examined, cholesterol lowering, agent stored at ambient pressure does not reveal any tendency toward recrystallization. The physical stability of neat probucol stored at ambient pressure has been investigated (i) at room temperature by means of X-ray diffraction technique (XRD) as well as (ii) at T = 333 K by means of broadband dielectric spectroscopy (BDS). Due to the fact that compression is an important stage of drugs manufacturing we additionally performed physical stability tests of amorphous probucol at elevated pressure. The recrystallization tendency of the examined pharmaceutical has been tracked online from the initial and further up to a few hours after compression by means of the high pressure BDS technique. These experiments indicate that even very small pressure applied during the sample compression immediately induce its recrystallization. Since, the sensitivity on pressure eliminates probucol from the group of physically stable amorphous APIs, its stabilization is required. Taking into account that there are many scientific reports describing the positive effect of coadministration of probucol with the drug atorvastatin, we used the latter as probucol's crystallization inhibitor.

DNA Photocleavage and Binding Modes of Methylene Violet 3RAX and its Derivatives: Effect of Functional Groups

With 4′-amino-N,N-diethylaniline and aniline as starting materials, methylene violet 3RAX 1 and its derivatives 2–5 were synthesised. The five compounds were characterised by IR, UV-vis, and 1H NMR spectroscopy and mass spectrometry. The binding mode between the synthesised compounds and DNA were investigated. The results show that both compounds 1 and 5 bind to DNA by an intercalative mode, while compounds 2–4 interact with DNA through a mixed binding mode involving groove binding and electrostatic interactions. The photocleavage ability of the five compounds to DNA were calculated to be 38, 40, 30, 20, and 13 %, respectively, when their concentration was adjusted to 400 μM. The singlet oxygen production of compounds measured by the 1,3-diphenylisobenzofuran method was consistent with the trend of DNA photocleavage ability. The DNA studies suggest that the binding mode between methylene violet 3RAX and DNA, the ability of methylene violet 3RAX to generate singlet oxygen, and the DNA photocleavage activity could be adjusted through modification of the amino group on methylene violet 3RAX.

Relaxation dynamics of glasses along a wide stability and temperature range

While lots of measurements describe the relaxation dynamics of the liquid state, experimental data of the glass dynamics at high temperatures are much scarcer. We use ultrafast scanning calorimetry to expand the timescales of the glass to much shorter values than previously achieved. Our data show that the relaxation time of glasses follows a super-Arrhenius behaviour in the high-temperature regime above the conventional devitrification temperature heating at 10 K/min. The liquid and glass states can be described by a common VFT-like expression that solely depends on temperature and limiting fictive temperature. We apply this common description to nearly-isotropic glasses of indomethacin, toluene and to recent data on metallic glasses. We also show that the dynamics of indomethacin glasses obey density scaling laws originally derived for the liquid. This work provides a strong connection between the dynamics of the equilibrium supercooled liquid and non-equilibrium glassy states.

Ultrastable glasses portray similar behaviour to ordinary glasses at high pressure

Pressure experiments provide a unique opportunity to unravel new insights into glass-forming liquids by exploring its effect on the dynamics of viscous liquids and on the evolution of the glass transition temperature. Here we compare the pressure dependence of the onset of devitrification, T_on, between two molecular glasses prepared from the same material but with extremely different ambient-pressure kinetic and thermodynamic stabilities. Our data clearly reveal that, while both glasses exhibit different dT_on/dP values at low pressures, they evolve towards closer calorimetric devitrification temperature and pressure dependence as pressure increases. We tentatively interpret these results from the different densities of the starting materials at room temperature and pressure. Our data shows that at the probed pressures, the relaxation time of the glass into the supercooled liquid is determined by temperature and pressure similarly to the behaviour of liquids, but using stability-dependent parameters.

Molecular Relaxations in Supercooled Liquid and Glassy States of Amorphous Quinidine: Dielectric Spectroscopy and Density Functional Theory Approaches

In this article, we conduct a comprehensive molecular relaxation study of amorphous Quinidine above and below the glass-transition temperature (Tg) through broadband dielectric relaxation spectroscopy (BDS) experiments and theoretical density functional theory (DFT) calculations, as one major issue with the amorphous state of pharmaceuticals is life expectancy. These techniques enabled us to determine what kind of molecular motions are responsible, or not, for the devitrification of Quinidine. Parameters describing the complex molecular dynamics of amorphous Quinidine, such as Tg, the width of the α relaxation (βKWW), the temperature dependence of α-relaxation times (τα), the fragility index (m), and the apparent activation energy of secondary γ relaxation (Ea-γ), were characterized. Above Tg (> 60 °C), a medium degree of nonexponentiality (βKWW = 0.5) was evidenced. An intermediate value of the fragility index (m = 86) enabled us to consider Quinidine as a glass former of medium fragility. Below Tg (< 60 °C), one well-defined secondary γ relaxation, with an apparent activation energy of Ea-γ = 53.8 kJ/mol, was reported. From theoretical DFT calculations, we identified the most reactive part of Quinidine moieties through exploration of the potential energy surface. We evidenced that the clearly visible γ process has an intramolecular origin coming from the rotation of the CH(OH)C9H14N end group. An excess wing observed in amorphous Quinidine was found to be an unresolved Johari-Goldstein relaxation. These studies were supplemented by sub-Tg experimental evaluations of the life expectancy of amorphous Quinidine by X-ray powder diffraction and differential scanning calorimetry. We show that the difference between Tg and the onset temperature for crystallization, Tc, which is 30 K, is sufficiently large to avoid recrystallization of amorphous Quinidine during 16 months of storage under ambient conditions.

Glass transition and stable glass formation of tetrachloromethane

Physical vapor deposition (PVD) has been used to prepare organic glasses with very high kinetic stability and it has been suggested that molecular anisotropy is a prerequisite for stable glass formation. Here we use PVD to prepare glasses of tetrachloromethane, a simple organic molecule with a nearly isotropic molecular structure. In situ AC nanocalorimetry was used to characterize the vapor-deposited glasses. Glasses of high kinetic stability were produced by deposition near 0.8 Tg. The isothermal transformation of the vapor-deposited glasses into the supercooled liquid state gave further evidence that tetrachloromethane forms glasses with high kinetic stability, with the transformation time exceeding the structural relaxation time of the supercooled liquid by a factor of 10(3). The glass transition temperature of liquid-cooled tetrachloromethane is determined as Tg ≈ 78 K, which is different from previously reported values. The frequency dependence of the glass transition was also determined and the fragility was estimated as m ≈ 118. The successful formation of PVD glasses of tetrachloromethane which have high kinetic stability argues that molecular asymmetry is not a prerequisite for stable glass formation.

Glass formability in medium-sized molecular systems/pharmaceuticals. I. Thermodynamics vs. kinetics

Scrutinizing critical thermodynamic and kinetic factors for glass formation and the glass stability of materials would benefit the screening of the glass formers for the industry of glassy materials. The present work aims at elucidating the factors that contribute to the glass formation by investigating medium-sized molecules of pharmaceuticals. Glass transition related thermodynamics and kinetics are performed on the pharmaceuticals using calorimetric, dielectric, and viscosity measurements. The characteristic thermodynamic and kinetic parameters of glass transition are found to reproduce the relations established for small-molecule glass formers. The systematic comparison of the thermodynamic and kinetic contributions to glass formation reveals that the melting-point viscosity is the crucial quantity for the glass formation. Of more interest is the finding of a rough correlation between the melting-point viscosity and the entropy of fusion normalized by the number of beads of the pharmaceuticals, suggesting the thermodynamics can partly manifest its contribution to glass formation via kinetics.

Recent developments in the experimental investigations of relaxations in pharmaceuticals by dielectric techniques at ambient and elevated pressure

In recent years, there is a growing interest in improving the physicochemical stability of amorphous pharmaceutical solids due to their very promising applications to manufacture medicines characterized by a better water solubility, and consequently by a higher dissolution rate than those of their crystalline counterparts. In this review article, we show that the molecular mobility investigated both in the supercooled liquid and glassy states is the crucial factor required to understand molecular mechanisms that govern the physical stability of amorphous drugs. We demonstrate that pharmaceuticals can be thoroughly examined by means of the broadband dielectric spectroscopy, which is a very useful experimental technique to explore different relaxation processes and crystallization kinetics as well. Such studies conducted in the wide temperature and pressure ranges provide data needed in searching correlations between properties of molecular dynamics and crystallization process, which are aimed at developing effective and efficient methods for stabilizing amorphous drugs.

Observation of the nearly constant loss in super rigid saccharides: in search of a hidden crossover in dynamics deep in the glassy state

The molecular dynamics of three saccharides: D-glucose, 1,6-anhydro-D-glucose (levoglucosan) and 1,6:2,3-dianhydro-β-D-mannopyranose of various degrees of freedom, number of hydroxyl groups and internal structures was investigated over a wide range of temperatures and frequencies by means of Broadband Dielectric Spectroscopy (BDS). Despite the pronounced variety in the physicochemical properties of the carbohydrates, no change in the shape of the structural relaxation process was observed in the vicinity of the glass transition temperature (β(KWW) = 0.5). On the other hand further studies of the Debye-Stokes-Einstein relationship between dc conductivity and structural dynamics revealed some significant changes connected with the ability to form strong H-bonded structures. Moreover the presence of nearly constant loss (NCL) at moderate frequencies and just below the T(g) in the glassy state of levoglucosan and 1,6:2,3-dianhydro-β-D-mannopyranose was noticeable. We followed the temperature evolution of ε'' located at frequencies f = 0.1 kHz and f = 1 kHz, where the NCL is detected. Interestingly, a clear change in the dynamics far below the glass transition was observed in both compounds. This crossover (T(c)), found in different materials, and studied by various experimental techniques, is usually interpreted as being caused by the freezing of the Johari-Goldstein (JG) relaxation process. Alternatively it can also be due to the increasing anharmonicity in the density of vibrational states. Interestingly, it was shown that the slope of ε''(T) measured above the T(c) slightly changes while below the T(c) stays constant after physical aging. This is related to the densification of the sample that might result in steric hindrance and suppression of some kind of motion occurring in the glassy state, involving the larger parts of the molecules.

Amorphous Protic Ionic Systems as Promising Active Pharmaceutical Ingredients: The Case of the Sumatriptan Succinate Drug

In this article, we highlight the benefits coming from the application of amorphous protic ionic systems as active pharmaceutical ingredients (APIs). Using the case of the sumatriptan (STR) drug, we show that the conversion of nonionic API to partially ionized amorphous protic succinate salt (STR SUCC) brings a substantial improvement in apparent solubility. Since in general the disordered systems reveal a tendency to self-arrangement during storage, the dominant part of this article is dedicated to the physical stability issue of sumatriptan and its ionic counterpart. To recognize the crystallization tendency of the studied systems, the calorimetric measurements were performed. Additionally, the role of ion dynamics in spontaneous nucleation of amorphous sumatriptan succinate is discussed. The differential scanning calorimetry analysis of ionic and nonionic sumatriptan reveals many similarities in thermal properties of these APIs as well as distinct differences in their resistance against crystallization in the supercooled liquid state. To determine the long-term physical stability of STR SUCC at room temperature conditions, the time scale of structural relaxation below their glass transition temperatures is estimated. We show that in contrast to nonionic materials, τα predictions of STR SUCC are much more complex and require aging experiments.

Universal Behavior of Dielectric Responses of Glass Formers: Role of Dipole-Dipole Interactions

From an exhaustive examination of the molecular dynamics in practically all van der Waals molecular glass formers ever probed by dielectric spectroscopy, we found that the width of the α-loss peak at or near the glass transition temperature T_{g} is strongly anticorrelated with the polarity of the molecule. The larger the dielectric relaxation strength Δε(T_{g}) of the system, the narrower is the α-loss peak. This remarkable property is explained by the contribution from the dipole-dipole interaction potential V_{dd}(r)=-Dr^{-6} to the attractive part of the intermolecular potential, making the resultant potential more harmonic, and the effect increases rapidly with the dipole moment μ and Δε(T_{g}) in view of the relation, D∝(μ^{4}/kT_{g})∝kT_{g}[Δε(T_{g})]^{2}. Since the novel correlation discovered encompasses practically all van der Waals molecular glass formers studied by dielectric spectroscopy, it impacts the large dielectric research community as well as those engaged in solving the glass transition problem.

Thermodynamic consequences of the kinetic nature of the glass transition

In this paper, we consider the glass transition as a kinetic process and establish one universal equation for the pressure coefficient of the glass transition temperature, dTg/dp, which is a thermodynamic characteristic of this process. Our findings challenge the common previous expectations concerning key characteristics of the transformation from the liquid to the glassy state, because it suggests that without employing an additional condition, met in the glass transition, derivation of the two independent equations for dTg/dp is not possible. Hence, the relation among the thermodynamic coefficients, which could be equivalent to the well-known Prigogine-Defay ratio for the process under consideration, cannot be obtained. Besides, by comparing the predictions of our universal equation for dTg/dp and Ehrenfest equations, we find the aforementioned supplementary restriction, which must be met to use the Prigogine-Defay ratio for the glass transition.

Toward a Better Understanding of the Physical Stability of Amorphous Anti-Inflammatory Agents: The Roles of Molecular Mobility and Molecular Interaction Patterns

The aim of this article is to examine the crystallization tendencies of three chemically related amorphous anti-inflammatory agents, etoricoxib, celecoxib, and rofecoxib. Since the molecular mobility is considered as one of the factors affecting the crystallization behavior of a given material, broadband dielectric spectroscopy was used to gain insight into the molecular dynamics of the selected active pharmaceutical ingredients. Interestingly, our experiments did not reveal any significant differences in their relaxation behavior either in the supercooled liquid or in the glassy state. Hence, as a possible explanation for the enhanced physical stability of etoricoxib, its ability to undergo a tautomerization reaction was recognized. The occurrence of intramolecular proton transfer in the disordered etoricoxib was proven experimentally by time-dependent dielectric and infrared (IR) measurements. Additionally, IR spectroscopy combined with density functional theory calculations pointed out that in the etoricoxib drug, being in fact a binary mixture of tautomers, the individual isomers may interact with each other through a hydrogen bonding network. A possible explanation of this issue was achieved by performing dielectric experiments at elevated pressure. Since compression results in etoricoxib recrystallization, the possible influence of pressure on the observed stabilization effect is also carefully discussed.