Liquid Interfaces: A Study by Sum-Frequency Vibrational Spectroscopy

Light on the interactions between nanoparticles and lipid membranes by interface-sensitive vibrational spectroscopy

Nanoparticles are produced in natural phenomena or synthesized artificially for technological applications. Their frequent contact with humans has been judged potentially harmful for health, and numerous studies are ongoing to understand the mechanisms of the toxicity of nanoparticles. At the macroscopic level, the toxicity can be established in vitro or in vivo by measuring the survival of cells. At the sub-microscopic level, scientists want to unveil the molecular mechanisms of the first interactions of nanoparticles with cells via the cell membrane, before the toxicity cascades within the whole cell. Unveiling a molecular understanding of the nanoparticle-membrane interface is a tricky challenge, because of the chemical complexity of this system and its nanosized dimensions buried within bulk macroscopic environments. In this review, we highlight how, in the last 10 years, second-order nonlinear optical (NLO) spectroscopy, and specifically vibrational sum frequency generation (SFG), has provided a new understanding of the structural, physicochemical, and dynamic properties of these biological interfaces, with molecular sensitivity. We will show how the intrinsic interfacial sensitivity of second-order NLO and the chemical information of vibrational SFG spectroscopy have revealed new knowledge of the molecular mechanisms that drive nanoparticles to interact with cell membranes, from both sides, the nanoparticles and the membrane properties.

The laser pump X-ray probe system at LISA P08 PETRA III

Understanding and controlling the structure and function of liquid interfaces is a constant challenge in biology, nanoscience and nanotechnology, with applications ranging from molecular electronics to controlled drug release. X-ray reflectivity and grazing incidence diffraction provide invaluable probes for studying the atomic scale structure at liquid-air interfaces. The new time-resolved laser system at the LISA liquid diffractometer situated at beamline P08 at the PETRA III synchrotron radiation source in Hamburg provides a laser pump with X-ray probe. The femtosecond laser combined with the LISA diffractometer allows unique opportunities to investigate photo-induced structural changes at liquid interfaces on the pico- and nanosecond time scales with pump-probe techniques. A time resolution of 38 ps has been achieved and verified with Bi. First experiments include laser-induced effects on salt solutions and liquid mercury surfaces with static and varied time scales measurements showing the proof of concept for investigations at liquid surfaces.

Aqueous Titania Interfaces

Water-metal oxide interfaces are central to many phenomena and applications, ranging from material corrosion and dissolution to photoelectrochemistry and bioengineering. In particular, the discovery of photocatalytic water splitting on TiO2 has motivated intensive studies of water-TiO2 interfaces for decades. So far, a broad understanding of the interaction of water vapor with several TiO2 surfaces has been obtained. However, much less is known about liquid water-TiO2 interfaces, which are more relevant to many practical applications. Probing these complex systems at the molecular level is experimentally challenging and is sometimes possible only through computational studies. This review summarizes recent advances in the atomistic understanding, mostly through computational simulations, of the structure and dynamics of interfacial water on TiO2 surfaces. The main focus is on the nature, molecular or dissociated, of water in direct contact with low-index defect-free crystalline surfaces. The hydroxyls resulting from water dissociation are essential in the photooxidation of water and critically affect the surface chemistry of TiO2.

Self-Assembled Monolayers for Interfacial Engineering in Solution-Processed Thin-Film Electronic Devices: Design, Fabrication, and Applications

Interfacial engineering has long been a vital means of improving thin-film device performance, especially for organic electronics, perovskites, and hybrid devices. It greatly facilitates the fabrication and performance of solution-processed thin-film devices, including organic field effect transistors (OFETs), organic solar cells (OSCs), perovskite solar cells (PVSCs), and organic light-emitting diodes (OLEDs). However, due to the limitation of traditional interfacial materials, further progress of these thin-film devices is hampered particularly in terms of stability, flexibility, and sensitivity. The deadlock has gradually been broken through the development of self-assembled monolayers (SAMs), which possess distinct benefits in transparency, diversity, stability, sensitivity, selectivity, and surface passivation ability. In this review, we first showed the evolution of SAMs, elucidating their working mechanisms and structure-property relationships by assessing a wide range of SAM materials reported to date. A comprehensive comparison of various SAM growth, fabrication, and characterization methods was presented to help readers interested in applying SAM to their works. Moreover, the recent progress of the SAM design and applications in mainstream thin-film electronic devices, including OFETs, OSCs, PVSCs and OLEDs, was summarized. Finally, an outlook and prospects section summarizes the major challenges for the further development of SAMs used in thin-film devices.

Regular Arrays of Rod-Shaped Molecular Photoswitches: Synthesis, Preparation, Characterization, and Selective Photoswitching within Mono- and Bilayer Systems

We assembled photoresponsive mono- and bilayer systems with well-defined properties from rod-shaped molecules equipped with different photoswitches. Using properly chosen chromophores (diarylethene-based switch and unidirectional light-driven molecular motor), we then selectively targeted layers made of the same types of photoswitches using appropriate monochromatic light. UV-vis analysis confirmed smooth and unrestricted photoisomerization. To achieve this, we synthesized a new class of triptycene-based molecular pedestals adept at forming sturdy Langmuir-Blodgett films on a water-air interface. The films were smoothly transferred to gold and quartz surfaces. Repeated deposition afforded bilayer systems: one layer containing diarylethene-based photoswitches and the other a unidirectional light-driven molecular motor. Structural analysis of both mono- and bilayer systems revealed the molecules to be tilted with carboxylic functions pointing to the surface. At least two different polymorphs differing in monolayer thickness and tilt angle (~40° and ~60°) were identified on the gold surface.

Vibronic coupling of Rhodamine 6G molecules studied by doubly resonant sum frequency generation spectroscopy with narrowband infrared and broadband visible

Doubly resonant sum frequency generation (DR-SFG) serves as a potent characteristic technique for probing the electronic spectra and vibronic coupling of molecules on surfaces. In this study, we successfully developed a novel infrared (IR)-white light (WL) DR-SFG spectroscopy based on narrowband IR and tunable broadband WL. This novel method was employed to explore the excitation spectrum and vibronic couplings of sub-monolayer Rhodamine 6G molecules. Our findings elucidate that the xanthene skeleton vibrational modes exhibit strong coupling with the S0-S1 electronic transition. Notably, we observed not only the 0-0 transition of the S0-S1 electronic continuum but also the 0-1 transition, a first time observation in the realm of DR-SFG spectroscopy. This advanced DR-SFG spectroscopy methodology facilitates a more sensitive examination of electronic spectra and the coupling between electronic transitions and vibrational modes, heralding a significant advancement in the understanding of molecular interactions on surfaces.

A review on solution- and vapor-responsive sensors for the detection of phthalates

Phthalic acid esters, largely referred to as phthalates, are today acknowledged as important pollutants used in the manufacture of polyvinyl chloride (PVC)-based plastics, whose use extends to almost every aspect of modern life. The risk of exposure to phthalates is particularly relevant as high concentrations are regularly found in drinking water, food-contact materials and medical devices, motivating an immense body of research devoted to methods for their detection in liquid samples. Conversely, phthalate vapors have only recently been acknowledged as potentially important atmospheric pollutants and as early fire indicators; additionally, deposition of these vapors can pose significant problems to the proper functioning of spacecraft and diverse on-board devices, leading to major space agencies recognizing the need of developing vapor-responsive phthalate sensors. In this manuscript we present a literature survey on solution- and vapor-responsive sensors and analytical assays for the detection of phthalates, providing a detailed analysis of a vast array of analytical data to offer a clear idea on the analytical performance (limits of detection and quantification, linear range) and advantages provided by each class of sensor covered in this review (electrochemical, optical and vapor-responsive) in the context of their potential real-life applications; the manuscript also gives detailed fundamental information on the various physicochemical responses exploited by these sensors and assays that could potentially be harnessed by new researchers entering the field.

Polarisationsabhängige Summenfrequenzspektroskopie (SFG) zur in situ Bestimmung der Nanopartikel-Morphologie

Die Oberflächenstruktur von Metall‐Nanopartikel auf Oxidträgern lässt sich über charakteristische Schwingungen von adsorbierten Sondenmolekülen wie CO bestimmen. Üblicherweise konzentrieren sich spektroskopische Untersuchungen auf die Peak‐Position und ‐Intensität, die mit der Bindungsgeometrie bzw. der Anzahl der Adsorptionsplätze zusammenhängen. Anhand zweier unterschiedlich präparierter Modellkatalysatoren wird gezeigt, dass die polarisationsabhängige Summenfrequenzspektroskopie (SFG) die gemittelte Oberflächenstruktur und Form von Nanopartikel beleuchten kann. SFG‐Ergebnisse für verschiedene Partikelgrößen und Morphologien werden mit direkter Realraum‐Strukturanalyse mittels TEM und STM verglichen. Die beschriebene Anwendung von SFG kann zur in situ Detektion der Partikelstruktur verwendet werden und könnte ein wertvolles Werkzeug in der operando Katalyse werden.

Polarization-Dependent Sum-Frequency-Generation Spectroscopy for In Situ Tracking of Nanoparticle Morphology

The surface structure of oxide-supported metal nanoparticles can be determined via characteristic vibrations of adsorbed probe molecules such as CO. Usually, spectroscopic studies focus on peak position and intensity, which are related to binding geometries and number of adsorption sites, respectively. Employing two differently prepared model catalysts, it is demonstrated that polarization-dependent sum-frequency-generation (SFG) spectroscopy reveals the average surface structure and shape of the nanoparticles. SFG results for different particle sizes and morphologies are compared to direct real-space structure analysis by TEM and STM. The described feature of SFG could be used to monitor particle restructuring in situ and may be a valuable tool for operando catalysis.

Probing Interfacial Behavior and Antifouling Activity of Adsorbed Copolymers at Solid/Liquid Interfaces

Polymers containing poly(ethylene glycol) (PEG) units can exhibit excellent antifouling properties, which have been proposed/used for coating of biomedical implants, separation membranes, and structures in marine environments, as well as active ingredients in detergent formulations to avoid soil redepositioning in textile laundry. This study aimed to elucidate the molecular behavior of a copolymer poly(MMA-co-MPEGMA) containing antiadhesive PEG side chains and a backbone of poly(methyl methacrylate), at a buried polymer/solution interface. Polyethylene terephthalate (PET) was used as a substrate to model polyester textile surfaces. Sum frequency generation (SFG) vibrational spectroscopy was applied to examine the interfacial behavior of the copolymer at PET/solution interfaces in situ and in real time. Complementarily, copolymer adsorption on PET and subsequent antiadhesion against protein foulants were probed by quartz-crystal microbalance experiments with dissipation monitoring (QCM-D). Both applied techniques show that poly(MMA-co-MPEGMA) adsorbs significantly to the PET/solution interface at bulk polymer solution concentrations as low as 2 ppm, while saturation of the surface was reached at 20 ppm. The hydrophobic MMA segments provide an anchor for the copolymer to bind onto PET in an ordered way, while the pendant PEG segments are more disordered but contain ordered interfacial water. In the presence of considerable amounts of dissolved surfactants, poly(MMA-co-MPEGMA) could still effectively adsorb on the PET surface and remained stable at the surface upon washing with hot and cold water or surfactant solution. In addition, it was found that adsorbed poly(MMA-co-MPEGMA) provided the PET surface with antiadhesive properties and could prevent protein deposition, highlighting the superior surface affinity and antifouling performance of the copolymer. The results obtained in this work demonstrate that amphiphilic copolymers containing PMMA anchors and PEG side chains can be used in detergent formulations to modify polyester surfaces during laundry and reduce deposition of proteins (and likely also other soils) on the textile.

Polysiloxane-Based Liquid-like Layers for Reducing Polymer and Wax Fouling

Surface fouling occurs when undesired matter adheres and accumulates on a surface, resulting in a decrease or loss of functionality. Polymer and wax fouling can cause costly blockages to crude oil pipelines, clog jet fuel injectors, foul chemical reaction vessels, and significantly decrease the efficiency of heat exchangers. Fouling occurs in many forms but can be segmented based on adherent size, modulus, and chemical functionality. Depending on the foulant, surface design strategies can vary greatly. Few strategies exist to prevent the buildup of wax and polymers on surfaces. In this report, we investigate the potential of highly disordered, siloxane liquid-like layers as a strategy for reducing wax and polymer deposition. In our tests, it was found that the liquid-like layers developed here were able to reduce postadsorption roughness for polymer and wax by as much as 35- and 47-fold, respectively, when compared to the control. SFG was utilized to investigate the molecular-level interfacial properties for each of the modified surfaces to help understand the antifouling mechanism. The data showed that the likely higher grafting density and a large degree of random conformational freedom at the liquid-surface interface make the developed siloxane-covered surfaces energetically unfavorable for polymer and wax accretion.

On the mechanisms of ion adsorption to aqueous interfaces: air-water vs. oil-water

The adsorption of ions to water-hydrophobe interfaces influences a wide range of phenomena, including chemical reaction rates, ion transport across biological membranes, and electrochemical and many catalytic processes; hence, developing a detailed understanding of the behavior of ions at water-hydrophobe interfaces is of central interest. Here, we characterize the adsorption of the chaotropic thiocyanate anion (SCN^-) to two prototypical liquid hydrophobic surfaces, water-toluene and water-decane, by surface-sensitive nonlinear spectroscopy and compare the results against our previous studies of SCN^- adsorption to the air-water interface. For these systems, we observe no spectral shift in the charge transfer to solvent spectrum of SCN^-, and the Gibb's free energies of adsorption for these three different interfaces all agree within error. We employed molecular dynamics simulations to develop a molecular-level understanding of the adsorption mechanism and found that the adsorption for SCN^- to both water-toluene and water-decane interfaces is driven by an increase in entropy, with very little enthalpic contribution. This is a qualitatively different mechanism than reported for SCN^- adsorption to the air-water and graphene-water interfaces, wherein a favorable enthalpy change was the main driving force, against an unfavorable entropy change.

Probing the molecular structure of aqueous triiodide via X-ray photoelectron spectroscopy and correlated electron phenomena

Liquid-microjet-based X-ray photoelectron spectroscopy was applied to aqueous triiodide solutions, I₃^-_(aq.), to investigate the anion's valence- and core-level electronic structure, ionization dynamics, associated electron-correlation effects, and nuclear geometric structure. The roles of multi-active-electron (shake-up) ionization processes - with noted sensitivity to the solute geometric structure - were investigated through I₃^-_(aq.) solution valence, I 4d, and I 3d core-level measurements. The experimental spectra were interpreted with the aid of simulated photoelectron spectra, built upon multi-reference ab initio electronic structure calculations associated with different I₃^-_(aq.) molecular geometries. A comparison of the single-to-multi-active-electron ionization signal ratios extracted from the experimental and theoretical core-level photoemission spectra suggests that the ground state of the solute adopts a near-linear average geometry in aqueous solutions. This contrasts with the interpretation of time-resolved X-ray solution scattering studies, but is found to be fully consistent with the rest of the solution-phase I₃^-_(aq.) literature. Comparing the results of low- and high-photon-energy photoemission measurements, we further suggest that the aqueous anion adopts a more asymmetric geometry at the aqueous-solution-gas interface than in the aqueous bulk.

Temporal and Chirp Effects of Laser Pulses on the Spectral Lineshape in Sum-Frequency Generation Vibrational Spectroscopy

Assignment and interpretation of the sum-frequency generation vibrational spectra (SFG-VS) depend on the ability to measure and understand the factors affecting the SFG-VS spectral lineshape accurately and reliably. In the past, the formulation of the polarization selection rules for SFG-VS and the development of the sub-wavenumber high-resolution broadband SFG-VS (HR-BB-SFG-VS) have provided solutions for many of these needs. However, despite these advantages, HR-BB-SFG-VS has not been widely adopted. The majority of SFG measurements so far still relies on the picosecond scanning SFG-VS (ps-SFG-VS) or the conventional broadband SFG-VS (BB-SFG-VS) with the spectral resolution around (mostly above) 10 cm-1, which also results in less ideal spectral lineshape in the SFG spectra due to the temporal and chirp effects of the laser pulses used in experiment. In this report, the temporal and the chirp effects of laser pulses with different profiles in the SFG experiment on the measured SFG-VS spectral lineshape are examined through spectral simulation. In addition, the experimental data of a classical model system, i.e., OTS (octadecyltrichlorosilane) monolayer on glass, obtained from the ps-SFG-VS, the BB-SFG-VS, and the HR-BB-SFG-VS measurements, are directly compared and examined. These results show that temporal and chirp effects are often significant in the conventional BB-SFG-VS, resulting lineshape distortions and peak position shifts besides spectral broadening. Such temporal and chirp effects are less significant in the ps scanning SFG-VS. For the HR-BB-SFG-VS, spectral broadening, and temporal and chirp effects are insignificant, making HR-BB-SFG-VS the choice for accurate and reliable measurement and analysis of SFG-VS spectra.

Investigating Bénard–Marangoni migration at the air–water interface in the time domain using sum frequency generation (SFG) spectroscopy of palmitic acid monolayers

Sum-frequency generation (SFG) spectroscopy is frequently used to investigate the structure of monolayer films of long-chain fatty acids at the air–water interface. Although labeled a non-invasive technique, introducing intense SFG lasers onto liquid interfaces has the potential to perturb them. In the present work, narrowband picosecond SFG is used to study the structural changes that occur in palmitic acid and per-deuterated palmitic acid monolayers at the air–water interface in response to the high field strengths inherent to SFG spectroscopy. In order to determine structural changes and identify measurement artifacts, the changes in specific resonance intensities were measured in real-time and over a broad range of surface concentrations from films spread onto a stationary Langmuir trough. Using narrowband instead of broadband SFG minimizes the overlap of the incident infrared beam in the lipid C–H stretching region with resonances from the water sub-phase. Nevertheless, narrowband SFG still generates a thermal gradient at the surface, which produces a significant decrease in local concentration in the area of the laser spot caused by Bérnard–Marangoni convection originating in the sub-phase. The decrease in concentration results in an increase in the conformational disorder and a decrease in the tilt angle of lipid tails. Crucially, it is shown that, even at the highest monolayer concentrations, this gives rise to a measurement effect, which manifests itself as a dependence on the spectral acquisition time. This effect should be taken into account when interpreting the structure of monolayer films on liquid surfaces deduced from their SFG spectra.

Passively Stabilized Phase-Resolved Collinear SFG Spectroscopy Using a Displaced Sagnac Interferometer

Sum-frequency generation (SFG) vibrational spectroscopy is a powerful technique to study interfaces at the molecular level. Phase-resolved SFG (PR-SFG) spectroscopy provides direct information on interfacial molecules' orientation. However, its implementation is technologically demanding: it requires the generation of a local oscillator wave and control of its time delay with sub-fs accuracy. Commonly used noncollinear PR-SFG provides this control naturally but requires very accurate sample height control. Collinear PR-SFG spectroscopy is less demanding regarding sample positioning, but tuning the local oscillator time delay with this beam geometry is challenging. Here, we develop a collinear PR-SFG setup using a displaced Sagnac interferometer. This scheme allows full, independent control of the time delay and intensity of the local oscillator and provides long-time phase stabilization (better than 5° over 12 h) for the measured signal. This approach substantially reduces the complexity of an experimental setup and combines the advantages of collinear and noncollinear PR-SFG techniques.

Analysing the water spectral pattern by near-infrared spectroscopy and chemometrics as a dynamic multidimensional biomarker in preservation: rice germ storage monitoring

Water activity is an important phenomenon not yet explained in terms of water molecular structure. This paper aims to find the relationship between the water activity and water molecular structure of the rice germ, based on its spectral pattern which can be measured using non-destructive technology. Aquaphotomics near-infrared spectroscopy was used to study rice germ stored at different levels of water activity and atmosphere. The findings show that state of the rice germ is governed by the water activity upon storage, which is defined by the structure of water within germ matrix. The structure of water can be described solely by the absorbance spectral pattern at the following absorbance bands: proton hydrates, hydration shells and water vapor (1364, 1375 and 1382 nm), trapped water (1392 nm), free water (1410 nm), hydration water (1425 nm), adsorbed water (1455 nm), non-bonded hydroxyl (1436 nm) and bound water (1520 nm).

Characterizing Anion Adsorption to Aqueous Interfaces: Toluene-Water versus Air-Water

We continue our investigation of the behavior of simple ions at aqueous interfaces, employing the combination of two surface-sensitive nonlinear spectroscopy tools, broadband deep UV electronic sum-frequency generation and UV second harmonic generation, to characterize the adsorption of thiocyanate to the interface of water with toluene─a prototypical hydrophobe. We find that both the interfacial spectrum and the Gibbs free energy of adsorption closely match results previously reported for the air-water interface. We observe no relative spectral shift in the higher-energy CTTS transition of thiocyanate, implying similar solvation environments for the two interfaces. Similarly, the Gibbs free energies of adsorption agree within error; however, we expect the respective enthalpic and entropic contributions to differ between the two interfaces, similar to our earlier findings for the air-water versus graphene-water interfaces. Further experiments and theoretical modeling are necessary to quantify the mechanistic differences.

Efficient Quantum Vibrational Spectroscopy of Water with High-Order Path Integrals: From Bulk to Interfaces

Vibrational spectroscopy is key in probing the interplay between the structure and dynamics of aqueous systems. To map different regions of experimental spectra to the microscopic structure of a system, it is important to combine them with first-principles atomistic simulations that incorporate the quantum nature of nuclei. Here we show that the large cost of calculating the quantum vibrational spectra of aqueous systems can be dramatically reduced compared with standard path integral methods by using approximate quantum dynamics based on high-order path integrals. Together with state-of-the-art machine-learned electronic properties, our approach gives an excellent description not only of the infrared and Raman spectra of bulk water but also of the 2D correlation and the more challenging sum-frequency generation spectra of the water-air interface. This paves the way for understanding complex interfaces such as water encapsulated between or in contact with hydrophobic and hydrophilic materials through robust and inexpensive surface-sensitive and multidimensional spectra with first-principles accuracy.

Two-dimensional electronic-vibrational sum frequency spectroscopy for interactions of electronic and nuclear motions at interfaces

Interactions of electronic and vibrational degrees of freedom are essential for understanding excited-states relaxation pathways of molecular systems at interfaces and surfaces. Here, we present the development of interface-specific two-dimensional electronic-vibrational sum frequency generation (2D-EVSFG) spectroscopy for electronic-vibrational couplings for excited states at interfaces and surfaces. We demonstrate this 2D-EVSFG technique by investigating photoexcited interface-active (E)-4-((4-(dihexylamino) phenyl)diazinyl)-1-methylpyridin-1- lum (AP3) molecules at the air-water interface as an example. Our 2D-EVSFG experiments show strong vibronic couplings of interfacial AP3 molecules upon photoexcitation and subsequent relaxation of a locally excited (LE) state. Time-dependent 2D-EVSFG experiments indicate that the relaxation of the LE state, S ₂, is strongly coupled with two high-frequency modes of 1,529.1 and 1,568.1 cm^-1 Quantum chemistry calculations further verify that the strong vibronic couplings of the two vibrations promote the transition from the S ₂ state to the lower excited state S ₁ We believe that this development of 2D-EVSFG opens up an avenue of understanding excited-state dynamics related to interfaces and surfaces.

The molecular structure of the surface of water-ethanol mixtures

Mixtures of water and alcohol exhibit an excess surface concentration of alcohol as a result of the amphiphilic nature of the alcohol molecule, which has important consequences for the physico-chemical properties of water-alcohol mixtures. Here we use a combination of intensity vibrational sum-frequency generation (VSFG) spectroscopy, heterodyne-detected VSFG (HD-VSFG), and core-level photoelectron spectroscopy (PES) to investigate the molecular properties of water-ethanol mixtures at the air-liquid interface. We find that increasing the ethanol concentration up to a molar fraction (MF) of 0.1 leads to a steep increase of the surface density of the ethanol molecules, and an increased ordering of the ethanol molecules at the surface. When the ethanol concentration is further increased, the surface density of ethanol remains more or less constant, while the orientation of the ethanol molecules becomes increasingly disordered. The used techniques of PES and VSFG provide complementary information on the density and orientation of ethanol molecules at the surface of water, thus providing new information on the molecular-scale properties of the surface of water-alcohol mixtures over a wide range of compositions. This information is invaluable in understanding the chemical and physical properties of water-alcohol mixtures.

Revealing molecular conformation-induced stress at embedded interfaces of organic optoelectronic devices by sum frequency generation spectroscopy

Interface stresses are pervasive and critical in conventional optoelectronic devices and generally lead to many failures and reliability problems. However, detection of the interface stress embedded in organic optoelectronic devices is a long-standing problem, which causes the unknown relationship between interface stress and organic device stability (one key and unsettled issue for practical applications). In this study, a kind of previously unknown molecular conformation-induced stress is revealed at the organic embedded interface through sum frequency generation (SFG) spectroscopy technique. This stress can be greater than 10 kcal/mol per nm² and is sufficient to induce molecular disorder in the organic semiconductor layer (with energy below 8 kcal/mol per nm²), finally causing instability of the organic transistor. This study not only reveals interface stress in organic devices but also correlates instability of organic devices with the interface stress for the first time, offering an effective solution for improving device stability.

Assessing the Impact of Solvent Selection on Vibrational Sum-Frequency Scattering Spectroscopy Experiments

The development of vibrational sum-frequency scattering (S-VSF) spectroscopy has opened the door to directly probing nanoparticle surfaces with an interfacial and chemical specificity that was previously reserved for planar interfacial systems. Despite its potential, challenges remain in the application of S-VSF spectroscopy beyond simplified chemical systems. One such challenge includes infrared absorption by an absorptive continuous phase, which will alter the spectral lineshapes within S-VSF spectra. In this study, we investigate how solvent vibrational modes manifest in S-VSF spectra of surfactant stabilized nanoemulsions and demonstrate how corrections for infrared absorption can recover the spectral features of interfacial solvent molecules. We also investigate infrared absorption for systems with the absorptive phase dispersed in a nonabsorptive continuous phase to show that infrared absorption, while reduced, will still impact the S-VSF spectra. These studies are then used to provide practical recommendations for anyone wishing to use S-VSF to study nanoparticle surfaces where absorptive solvents are present.

Development of interface-/surface-specific two-dimensional electronic spectroscopy

Structures, kinetics, and chemical reactivities at interfaces and surfaces are key to understanding many of the fundamental scientific problems related to chemical, material, biological, and physical systems. These steady-state and dynamical properties at interfaces and surfaces require even-order techniques with time-resolution and spectral-resolution. Here, we develop fourth-order interface-/surface-specific two-dimensional electronic spectroscopy, including both two-dimensional electronic sum frequency generation (2D-ESFG) spectroscopy and two-dimensional electronic second harmonic generation (2D-ESHG) spectroscopy, for structural and dynamics studies of interfaces and surfaces. The 2D-ESFG and 2D-ESHG techniques were based on a unique laser source of broadband short-wave IR from 1200 nm to 2200 nm from a home-built optical parametric amplifier. With the broadband short-wave IR source, surface spectra cover most of the visible light region from 480 nm to 760 nm. A translating wedge-based identical pulses encoding system (TWINs) was introduced to generate a phase-locked pulse pair for coherent excitation in the 2D-ESFG and 2D-ESHG. As an example, we demonstrated surface dark states and their interactions of the surface states at p-type GaAs (001) surfaces with the 2D-ESFG and 2D-ESHG techniques. These newly developed time-resolved and interface-/surface-specific 2D spectroscopies would bring new information for structure and dynamics at interfaces and surfaces in the fields of the environment, materials, catalysis, and biology.

Sum frequency generation spectroscopy in heterogeneous model catalysis: a minireview of CO-related processes

Sum frequency generation (SFG) vibrational spectroscopy is applied to ambient pressure surface science studies of adsorption and catalytic reactions at solid/gas interfaces.

Imaging Arrangements of Discrete Ions at Liquid-Solid Interfaces

The individual and collective behavior of ions near electrically charged interfaces is foundational to a variety of electrochemical phenomena encountered in biology, energy, and the environment. While many theories have been developed to predict the interfacial arrangements of counterions, direct experimental observations and validations have remained elusive. Utilizing cryo-electron microscopy, here we directly visualize individual counterions and reveal their discrete interfacial layering. Comparison with simulations suggests the strong effects of finite ionic size and electrostatic interactions. We also uncover correlated ionic structures under extreme confinement, with the channel widths approaching the ionic diameter (∼1 nm). Our work reveals the roles of ionic size, valency, and confinement in determining the structures of liquid-solid interfaces and opens up new opportunities to study such systems at the single-ion level.

Probing the electrode-solution interfaces in rechargeable batteries by sum-frequency generation spectroscopy

An in-depth understanding of the electrode-electrolyte interaction and electrochemical reactions at the electrode-solution interfaces in rechargeable batteries is essential to develop novel electrolytes and electrode materials with high performance. In this perspective, we highlight the advantages of the interface-specific sum-frequency generation (SFG) spectroscopy on the studies of the electrode-solution interface for the Li-ion and Li-O₂ batteries. The SFG studies in probing solvent adsorption structures and solid-electrolyte interphase formation for the Li-ion battery are briefly reviewed. Recent progress on the SFG study of the oxygen reaction mechanisms and stability of the electrolyte in the Li-O₂ battery is also discussed. Finally, we present the current perspective and future directions in the SFG studies on the electrode-electrolyte interfaces toward providing deeper insight into the mechanisms of discharging/charging and parasitic reactions in novel rechargeable battery systems.

Coverage-Induced Orientation Change: CO on Ir(111) Monitored by Polarization-Dependent Sum Frequency Generation Spectroscopy and Density Functional Theory

Polarization-dependent sum frequency generation (SFG) spectroscopy was applied to study the adsorption of carbon monoxide (CO) on the well-ordered (annealed) Ir(111) single-crystal surface at various CO coverages. Coverage was adjusted by varying the substrate temperature (300-575 K) and/or gas pressure (10^-7 to 1.0 mbar). Under all conditions investigated, only a single absorption band at 2038-2094 cm^-1 was observed, characteristic of linearly bonded (on-top) CO. Using different polarizations, PPP and SSP spectra were acquired with a high signal-to-noise ratio, whereby tilt angles of CO on Ir(111) could be determined for the first time by SFG. It was found that not only the vibrational frequency of on-top CO but also the tilt angle was strongly coverage-dependent. The higher the coverage was, the larger the vibrational frequency and the tilt angle were. At about 0.7 ML coverage, a CO tilt angle of at least 20° was observed, which is in good agreement with density functional theory (DFT) calculations. In addition, the molecular hyperpolarizability ratio (R) of CO (at 0.13 ML in UHV) was determined to be 0.08. Based on the combined SFG/DFT results, it may change to 0.29 at 0.77 ML coverage.

Structure and solvation of confined water and water-ethanol clusters within microporous Brønsted acids and their effects on ethanol dehydration catalysis

Water networks confined within zeolites solvate clustered reactive intermediates and must rearrange to accommodate transition states that differ in size and polarity, with thermodynamic penalties that depend on the shape of the confining environment.

Aqueous-phase reactions within microporous Brønsted acids occur at active centers comprised of water-reactant-clustered hydronium ions, solvated within extended hydrogen-bonded water networks that tend to stabilize reactive intermediates and transition states differently. The effects of these diverse clustered and networked structures were disentangled here by measuring turnover rates of gas-phase ethanol dehydration to diethyl ether (DEE) on H-form zeolites as water pressure was increased to the point of intrapore condensation, causing protons to become solvated in larger clusters that subsequently become solvated by extended hydrogen-bonded water networks, according to in situ IR spectra. Measured first-order rate constants in ethanol quantify the stability of S_N2 transition states that eliminate DEE relative to (C₂H₅OH)(H⁺)(H₂O)_n clusters of increasing molecularity, whose structures were respectively determined using metadynamics and ab initio molecular dynamics simulations. At low water pressures (2–10 kPa H₂O), rate inhibition by water (–1 reaction order) reflects the need to displace one water by ethanol in the cluster en route to the DEE-formation transition state, which resides at the periphery of water–ethanol clusters. At higher water pressures (10–75 kPa H₂O), water–ethanol clusters reach their maximum stable size ((C₂H₅OH)(H⁺)(H₂O)_4–5), and water begins to form extended hydrogen-bonded networks; concomitantly, rate inhibition by water (up to –3 reaction order) becomes stronger than expected from the molecularity of the reaction, reflecting the more extensive disruption of hydrogen bonds at DEE-formation transition states that contain an additional solvated non-polar ethyl group compared to the relevant reactant cluster, as described by non-ideal thermodynamic formalisms of reaction rates. Microporous voids of different hydrophilic binding site density (Beta; varying H⁺ and Si–OH density) and different size and shape (Beta, MFI, TON, CHA, AEI, FAU), influence the relative extents to which intermediates and transition states disrupt their confined water networks, which manifest as different kinetic orders of inhibition at high water pressures. The confinement of water within sub-nanometer spaces influences the structures and dynamics of the complexes and extended networks formed, and in turn their ability to accommodate the evolution in polarity and hydrogen-bonding capacity as reactive intermediates become transition states in Brønsted acid-catalyzed reactions.

Structure Determination of Hen Egg-White Lysozyme Aggregates Adsorbed to Lipid/Water and Air/Water Interfaces

We use vibrational sum-frequency generation (VSFG) spectroscopy to study the structure of hen egg-white lysozyme (HEWL) aggregates adsorbed to DOPG/D₂O and air/D₂O interfaces. We find that aggregates with a parallel and antiparallel β-sheet structure together with smaller unordered aggregates and a denaturated protein are adsorbed to both interfaces. We demonstrate that to retrieve this information, fitting of the VSFG spectra is essential. The number of bands contributing to the VSFG spectrum might be misinterpreted, due to interference between peaks with opposite orientation and a nonresonant background. Our study identified hydrophobicity as the main driving force for adsorption to the air/D₂O interface. Adsorption to the DOPG/D₂O interface is also influenced by hydrophobic interaction; however, electrostatic interaction between the charged protein's groups and the lipid's headgroups has the most significant effect on the adsorption. We find that the intensity of the VSFG spectrum at the DOPG/D₂O interface is strongly enhanced by varying the pH of the solution. We show that this change is not due to a change of lysozyme's and its aggregates' charge but due to dipole reorientation at the DOPG/D₂O interface. This finding suggests that extra care must be taken when interpreting the VSFG spectrum of proteins adsorbed at the lipid/water interface.

Hydrogen Bonds and Molecular Orientations of Supramolecular Structure between Barbituric Acid and Melamine Derivative at the Air/Water Interface Revealed by Heterodyne-Detected Vibrational Sum Frequency Generation Spectroscopy

We studied the supramolecular structure between barbituric acid (pyrimidine-2,4,6(1H,3H,5H)-trione, BA) and an amphiphilic melamine derivative at the air/water interface by heterodyne-detected vibrational sum frequency generation (HD-VSFG) spectroscopy. HD-VSFG measurements in situ showed a positive broad band from 2300 to 2950 cm^-1. By comparing the experimental results with ab initio molecular dynamics (AIMD) simulations, we assigned the broad band to the NH stretching modes of BA strongly hydrogen-bonded to the melamine derivative. In addition, we report in situ HD-VSFG spectra of the interfacial supramolecular structure in the CO stretching region. Two CO stretching bands were identified. On the basis of the signs of the C=O bands, we uniquely determined the orientation of BA. The strong hydrogen bonds and the molecular orientations are direct evidence for the supramolecular structure based on complementary hydrogen bonds at the air/water interface.

Interface-Specific Two-Dimensional Electronic Sum Frequency Generation Spectroscopy

High even-order surface/interface specific spectroscopy has the potential to provide more structural and dynamical information about surfaces and interfaces. In this work, we developed a novel fourth-order interface-specific two-dimensional electronic sum frequency generation (2D-ESFG) for structures and dynamics at surfaces and interfaces. A translating wedge-based identical pulses encoding system (TWINs) was introduced to generate phase-locked pulse pairs for coherent pump beams in 2D-ESFG. As a proof-of-principle experiment, fourth-order 2D-ESFG spectroscopy was used to demonstrate couplings of surface states for both n-type and p-type GaAs (100). We found surface dark state within the bandgap of the GaAs in 2D-ESFG spectra, which could not be observed in one-dimensional ESFG spectra. To our best knowledge, this is a first demonstration of interface-specific two-dimensional electronic spectroscopy. The development of the 2D-ESFG spectroscopy will provide new structural probes of spectral diffusion, conformational dynamics, energy transfer, and charge transfer for surfaces and interfaces.

Insights on the Molecular Characteristics of Molecularly Imprinted Polymers as Monitored by Sum Frequency Generation Spectroscopy

Sensing in molecularly imprinted polymers (MIPs) requires specific interactions of the imprinted polymer and the approaching template molecule. These interactions are affected by the morphology of the polymer surface, the affinity of the template molecule to the polymer network, and the steric approach. In this particular study, a template molecule, metronidazole, is studied with respect to the typically used methacrylic acid-based imprinted polymer using a combination of bulk and surface techniques. The resulting infrared (IR) spectra exhibited the presence of the template molecule in the polymer matrix as well as their efficient removal after washing. Dipping of the MIP according to what is expected of facile sensing in an aqueous solution of metronidazole did not show any presence of the template molecule in the bulk of the MIP, as observed by IR spectroscopy. However, using sum frequency generation (SFG) spectroscopy, the CH aromatic stretch of the imidazole ring positioned at ∼3100 cm^-1 was observed at the polymer surface, including its inner pores or cavities, and at the buried polymer-fused silica interface after dipping. SFG studies have also shown the vibrational signatures of the polymer matrix, the presence of the template molecule on the surface, and the detection of residual template molecules after washing. Increasing the washing time to 50 min has proven to be less effective than increasing the washing cycles to three. However, after the third cycle, reorganization of the polymer matrix was evident as also the complete removal of the template molecule. The observed changes from the acquired images using scanning electron microscopy and atomic force microscopy show the structural morphologies of MIPs and a good distribution of the pores across the MIP surface. The study demonstrates the importance of combining both bulk and surface characterization in providing insight into the template molecule-polymer network interactions.

Orientational Analysis of Monolayers at Low Surface Concentrations Due to an Increased Signal-to-Noise Ratio (S/N) Using Broadband Sum Frequency Generation Vibrational Spectroscopy

Sum frequency generation (SFG) * Equal contributors. spectroscopy was used to deduce the orientation of the terminal methyl (CH₃) group of self-assembled monolayers (SAMs) at the air-solid and air-liquid interfaces at surface concentrations as low as 1% protonated molecules in the presence of 99% deuterated molecules. The SFG spectra of octadecanethiol (ODT) and deuterated octadecanethiol (d₃₇ ODT) SAMs on gold were used for analysis at the air-solid interface. However, the eicosanoic acid (EA) and deuterated EA (d₃₉ EA) SAMs on the water were analyzed at the air-liquid interface. The tilt angle of the terminal CH₃ group was estimated to be ∼39 ° for a SAM of 1% ODT : 99% d₃₇ ODT, whereas the tilt angle of the terminal CH₃ group of the 1% EA : 99% d₃₉ EA monolayer was estimated to be ∼32 °. The reliability of the orientational analysis at low concentrations was validated by testing the sensitivity of the SFG spectroscopy. A signal-to-noise (S/N) ratio of ∼60 and ∼45 was obtained for the CH₃ symmetric stretch (SS) of 1% ODT : 99% d₃₇ ODT and 1% EA : 99% d₃₉ EA, respectively. The estimated increase in S/N ratio values, as a measure of the sensitivity of the SFG spectroscopy, verified the capacity to acquire the SFG spectra at low concentrations of interfacial molecules under ambient conditions. Overall, the orientational analysis of CH₃ SS vibrational mode was feasible at low concentrations of protonated molecules due to increased S/N ratio. In support, the improved S/N ratio on varying incident power density of the visible beam was also experimentally demonstrated.

The Influence of Sodium Iodide Salt on the Interfacial Properties of Aqueous Methanol Solution by a Combined Molecular Simulation and Sum Frequency Generation Vibrational Spectroscopy Study

Understanding the influence of salt ions on the microscopic properties of liquid interfaces is of both fundamental and practical importance. A large number of previous experimental and theoretical investigations have explored the salt effects on the surfaces of either pure water or neat organic liquid. However, how the salt ions affect the interfacial structures of water/organic liquid mixtures has rarely been studied. Here, the molecular dynamics (MD) simulations and sum frequency generation vibrational spectroscopy (SFG-VS) were carried out to investigate the influence of sodium iodide (NaI) on the air/liquid interfaces of the methanol-water mixtures. The SFG-VS spectral intensities were discovered to increase with the addition of 3 M NaI, while the center frequencies of the C-H stretching vibrations at high methanol concentrations showed a ∼2 cm^-1 blue shift compared with those obtained before adding NaI. The MD results indicated that Na⁺ and I^- can only affect Part I (near the bulk phase) but not Part II (near the gas phase) of the interfacial region. It was also found that the average orientations of interfacial methyl groups were constant and not effectively disturbed by the changes of methanol concentrations or the addition of NaI. It is therefore concluded that the changes of the SFG-VS intensities upon the addition of NaI salts were mainly caused by the increasing number of interfacial methanol molecules. Further analysis showed that the existence of NaI affects the surface tensions more for the interfaces with higher bulk methanol concentrations, which is in agreement with the SFG-VS results. It is noteworthy that the maximum number density of methanol molecules with the net nonzero orientations is reached near the Gibbs dividing surface, the reasons of which are worth further investigating.

Broadband vibrational sum-frequency generation spectrometer at 100 kHz in the 950-1750 cm-1 spectral range utilizing a LiGaS2 optical parametric amplifier

We present a 100 kHz broadband vibrational sum-frequency generation (VSFG) spectrometer operating in the 5.7-10.5 µm (950-1750 cm^-1) wavelength range. The mid-infrared beam of the system is obtained from a collinear, type-I LiGaS₂-crystal-based optical parametric amplifier seeded by a supercontinuum and pumped directly by 180 fs, ~32 µJ, 1.03 µm pulses from an Yb:KGd(WO₄)₂ laser system. Up to 0.5 µJ mid-infrared pulses with durations below 100 fs were obtained after dispersion compensation utilizing bulk materials. We demonstrate the utility of the spectrometer by recording high-resolution, low-noise vibrational spectra of Langmuir-Blodgett supported lipid monolayers on CaF₂. The presented VSFG spectrometer scheme offers superior signal-to-noise ratios and constitutes a high-efficiency, low-cost, easy-to-use alternative to traditional schemes relying on optical parametric amplification followed by difference frequency generation.

The Jones-Ray Effect Is Not Caused by Surface-Active Impurities

Pure aqueous electrolyte solutions display a minimum in surface tension at concentrations of 2 ± 1 mM. This effect has been a source of controversy since it was first reported by Jones and Ray in the 1930s. The Jones-Ray effect has frequently been dismissed as an artifact linked to the presence of surface-active impurities. Herein we systematically consider the effect of surface-active impurities by purposely adding nanomolar concentrations of surfactants to dilute electrolyte solutions. Trace amounts of surfactant are indeed found to decrease the surface tension and influence the surface chemistry. However, surfactants can be removed by repeated aspiration and stirring cycles, which eventually deplete the surfactant from solution, creating a pristine surface. Upon following this cleaning procedure, a reduction in the surface tension by millimolar concentrations of salt is still observed. Consequently, we demonstrate that the Jones-Ray effect is not caused by surface-active impurities.

Counteracting Interfacial Energetics for Wetting of Hydrophobic Surfaces in the Presence of Surfactants

Surface active agents (surfactants) are commonly used to improve the wetting of aqueous solutions on hydrophobic surfaces. The improved wettability is usually quantified as a decrease of the contact angle θ of a droplet on the surface, where the contact angle θ is given by the three surface tensions involved. Surfactants are known to lower the liquid-vapor surface tension, but what they do to the two other surface tensions is less clear. We propose an improved Zisman method for quantifying the wetting behavior of surfactants at the solid surface. This allows us to show that a number of very common surfactants do not change the wettability of the solid: they give the same contact angle as a simple liquid with the same liquid-vapor surface tension. Surface-specific sum-frequency generation spectroscopy shows that nonetheless surfactants are present at the solid surface. The surfactants therefore change the solid-liquid and solid-vapor surface tensions by the same amount, leading to an unchanged contact angle.

Polarization-Dependent SFG Spectroscopy of Near Ambient Pressure CO Adsorption on Pt(111) and Pd(111) Revisited

Polarization-dependent sum frequency generation (SFG) vibrational spectroscopy was employed to examine CO overlayers on Pt(111) and Pd(111) single crystal surfaces at room temperature. Utilizing different polarization combinations (SSP and PPP) of the visible and SFG light allows to determine the molecular orientation (tilt angle) of interface molecules but the analysis of the measured \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$I_{\text{ppp}}/I_{\text{ssp}}$$\end{document}Ippp/Issp is involved and requires a proper optical interface model. For CO/Pt(111), the hyperpolarizability ratio \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left( {R={\beta _{aac}}/{\beta _{ccc}}={\beta _{bbc}}/{\beta _{ccc}}} \right)$$\end{document}R=βaac/βccc=βbbc/βccc is not exactly known and varying R in the range 0.1–0.5 yields tilt angles of 40°–0°, respectively. Based on the known perpendicular adsorption of CO on Pt, an exact R-value of 0.49 was determined. Polarization-dependent SFG spectra in the pressure range 10⁻⁴ to 36 mbar did not indicate any change of the tilt angle of adsorbed CO. Modeling also indicated a strong dependence of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${I_{{\text{ppp}}}}/{I_{{\text{ssp}}}}$$\end{document}Ippp/Issp on the incidence angles of visible and IR laser beams. Complementing previous low temperature/low pressure data, room temperature CO adsorption on Pd(111) was examined from 10⁻⁶ to 250 mbar. The absolute PPP and SSP spectral intensities on Pt and Pd were simulated, as well as the expected \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${I_{{\text{ppp}}}}/{I_{{\text{ssp}}}}$$\end{document}Ippp/Issp ratios. Although CO on Pt and Pd should exhibit similar intensities (at high CO coverage), the higher \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${I_{{\text{ppp}}}}/{I_{{\text{ssp}}}}$$\end{document}Ippp/Issp ratio for Pd (48 vs. 27 on Pt) renders the detection of adsorbed CO in SSP spectra difficult. The presence or absence of CO species in SSP spectra can thus not simply be correlated to tilted or perpendicular CO molecules, respectively. Careful modeling, including not only molecular and interface properties, but also the experimental configuration (incidence angles), is certainly required even for seemingly simple adsorbate–substrate systems.