Aggregation behavior of bile salts in aqueous solution

High heterogeneity in the size distribution of the micellar fraction from in vitro digestions: sample preparation and reporting recommendations

BACKGROUND

Understanding the size and surface charge (ζ-potential) of particles in the mixed micellar fraction produced by in vitro digestion is crucial to understand their cellular absorption and transport. The inconsistent presentation of micellar size data, often limited to average particle diameter, makes comparison of studies difficult. The present study aimed to assess different size data representations (mean particle diameter, relative intensity- or volume-weighted size distribution) to better understand physiological mixed micelle characteristics and to provide recommendations for size reporting and sample handling.

RESULTS

Dietary compounds (RRR-α-tocopherol, retinyl-palmitate, β-carotene, curcumin and naringenin) underwent a simplified in vitro digestion, whereas foods (spinach and red cabbage) were subjected to both a simplified and the INFOGEST 2.0 digestions. Dynamic light scattering was used to measure size and surface charge of the mixed micelles. A significant percentage of particles above the 200 nm filter cut-off was observed, indicating aggregation and dynamic size changes in the mixed micellar fraction. Freezing of the mixed micelles notably enhanced the aggregation.

CONCLUSION

The determination of particle size in polydisperse mixed micellar fractions is challenging, and relying solely on average particle diameter can be misleading. Especially in more polydisperse samples, parameters such as polydispersity index and volume-weighted distribution should accompany average particle diameter data. To minimize the effect of freezing on particle size, we recommend filtering the digesta after storage (freezing), as this leads to similar size distribution compared to mixed micellar fraction measured directly after digestion. © 2025 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Phenotypic analysis of various Clostridioides difficile ribotypes reveals consistency among core processes

Clostridioides difficile infections (CDI) cause almost 300,000 hospitalizations per year of which ~15-30% are the result of recurring infections. The prevalence and persistence of CDI in hospital settings has resulted in an extensive collection of C. difficile clinical isolates and their classification, typically by ribotype. While much of the current literature focuses on one or two prominent ribotypes (e.g., RT027), recent years have seen several other ribotypes dominate the clinical landscape (e.g., RT106 and RT078). Some ribotypes are associated with severe disease and / or increased recurrence rates, but why are certain ribotypes more prominent or harmful than others remains unknown. Because C. difficile has a large, open pan-genome, this observed relationship between ribotype and clinical outcome could be a result of the genetic diversity of C. difficile. Thus, we hypothesize that core biological processes of C. difficile are conserved across ribotypes / clades. We tested this hypothesis by observing the growth kinetics, sporulation, germination, bile acid sensitivity, bile salt hydrolase activity, and surface motility of fifteen strains belonging to various ribotypes spanning each known C. difficile clade. In viewing these phenotypes across each strain, we see that core phenotypes (growth, germination, sporulation, and resistance to bile salt toxicity) are remarkably consistent across clades / ribotypes. This suggests that variations observed in the clinical setting may be due to unidentified factors in the accessory genome or due to unknown host-factors.

Importance

C. difficile infections impact thousands of individuals every year many of whom experience recurring infections. Clinical studies have reported an unexplained correlation between some clades / ribotypes of C. difficile and disease severity / recurrence. Here, we demonstrate that C. difficile strains across the major clades / ribotypes are consistent in their core phenotypes. This suggests that such phenotypes are not responsible for variations in disease severity / recurrence and are ideal targets for the development of therapeutics meant to treat C. difficile related infections.

Corrosion Inhibition of Carbon Steel in Neutral Chloride Solutions Using Salts of Primary Bile Acids

Due to growing environmental concerns and regulatory pressures, the demand for environmentally friendly corrosion inhibitors has increased. Biosurfactants are biodegradable and have a low toxicity. However, very few studies have reported on their potential use as corrosion inhibitors. The present study reports the novel application of two bile salts (sodium cholate NaC and sodium chenodeoxycholate NaCDC) as environmentally friendly corrosion inhibitors for carbon steel in a neutral 20 mM NaCl solution. The results of potentiodynamic polarization and electrochemical impedance measurements showed that when added at a concentration of 5 mM, the corrosion inhibition efficiencies of NaC and NaCDC were about 60% and 85%, respectively. The poor inhibitory character of NaC was confirmed by XPS analysis, revealing the formation of oxidative corrosion products on the steel surface. For the steel sample immersed in the solution containing NaCDC, the XPS measurements showed clear evidence of the presence of an organic layer and a passive oxide film on the steel surface. While the steroidal skeleton of NaC is characterized by marked biplanarity (considering its hydrophobic and hydrophilic faces), NaCDC features a steroidal ring with a hydrophilic edge (it does not exhibit biplanarity). Thus, the self-assembly and adsorption behavior of these bile salts on the steel surface are different, leading in the case of NaCDC to form a densely packed protective organic layer.

Solubilization and Photostabilization in a Sodium Deoxycholate Hydrogel of a Neutral Conjugated Thiophene Oligomer and Polymer

Oligo(3-hexylthiophene-co-1,4-phenylene) and poly(3-hexylthiophene) were solubilized in sodium deoxycholate self-assemblies in water solutions and hydrogels, with the goal of solubilizing sufficient material in a hydrogel for fluorescence applications. The neutral conjugated oligomer and polymer were incorporated as monomers into the self-assemblies with sodium deoxycholate aggregates, leading to the photoprotection of these neutral conjugated and water-insoluble molecules. Dynamic light scattering, rheology, and fluorescence experiments established that the deoxycholate aggregation and gel formation properties were not altered with the incorporation of the oligomer or polymer into the deoxycholate self-assemblies, showing that this adaptable host system with some molecular recognition elements is a viable strategy to incorporate into hydrogels neutral conjugated molecules as isolated monomers. This strategy has the potential to be used when conjugated molecules are used for fluorescence applications in hydrogels.

Bile conjugation and its effect on in vitro lipolysis of emulsions

Bile Salts (BS) are responsible for stimulating lipid digestion in our organism. Gut microbiota are responsible for the deconjugation process of primary conjugated to secondary unconjugated BS. We use two structurally distinct BS and characterize the rate of lipolysis as a compound parameter. A static in-vitro digestion model as well as meta-analysis of literature data has been performed to determine the most influential factors affecting the lipid digestion process. The results demonstrate that lipolysis of emulsions using conjugated BS (NaTC, FFA = 60.0 %, CMC in SIF = 5.58 mM, MSR of linoleic acid = 0.21, rate of adsorption = -0.057 mN/m.s) enhances the release of FFA compared to deconjugated BS (NaDC, FFA = 49.5 %, CMC in SIF = 2.49 mM, MSR of linoleic acid = 0.16 rate of adsorption = -0.064 mN/m.s). These results indicate that conjugation plays an important role in controlling the rate of lipolysis in our organism which can be in turn, tuned by the microflora composition of our gut, ultimately controlling the rate of deconjugation of the BS.

Micelle formation of sodium taurolithocholate

The proportion of sodium taurolithocholate (NaTLC) is extremely low in human bile salts. NaTLC forms aggregates with other lipids in the bile and functions as an emulsifying and solubilizing agent. The molecular structure of NaTLC contains hydrophilic hydroxyl and sulfonic acid groups at both ends of the steroid ring. This molecular structure is similar to bolaform amphiphilic substance having hydrophilic groups at both ends due to the characteristics of its molecular structure. This study investigated the aggregate properties of the NaTLC using surface tension measurements, light scattering, small-angle X-ray scattering (SAXS), and cryo-transmission electron microscopy (cryo-TEM). Surface tension measurement showed that the surface tension of the NaTLC solution decreased to 54 mN m-1. The concentration that showed the minimum surface tension corresponded to the critical micelle concentration (CMC: 0.6 mmol L-1, 308 K) determined by the change in light scattering intensity. On the other hand, the degree of counterion (sodium ions) binding to the micelles increased with increasing NaTLC concentration. SAXS and cryo-TEM measurements showed that the NaTLC formed large string-like micelles. The surface activity and large aggregates showed the potential for use as biosurfactants. However, because of the relatively low solubility of NaTLC in water, its use as a biosurfactant is limited to a narrow concentration range.

Hepatic Bile Formation: Developing a New Paradigm

In 1959, Ivar Sperber contrasted bile formation with that of urine and proposed that water flow into the canalicular conduit is in response to an osmotic, not a hydrostatic, gradient. Early attempts to support the hypothesis using a bile acid, sodium taurocholate, and the hormone secretin to stimulate bile flow led to conflicting data and a moratorium on attempts to further develop the initial proposal. However, current data amplify the initial proposal and indicate both paracellular and transcellular water flow into hepatic ductules and the canalicular conduit in response to an osmotic gradient. Also, the need to further modify the initial proposal became apparent with the recognition that bile acid aggregates (micelles), which form in the canalicular conduit, generate lecithin-cholesterol vesicles that contain water unrelated to an osmotic gradient. As part of this development is the recent introduction of the fluorescent localization after photobleaching technique for direct determination of hepatic duct flow and clarification of the role of biomarkers such as mannitol and polyethylene glycol 900. With the new paradigm, these biomarkers may prove useful for quantifying paracellular and transcellular water flow, respectively. SIGNIFICANCE STATEMENT: It is essential to identify and characterize all the sites for water flow during hepatic bile formation to obtain more precision in evaluating the causes and possible therapeutic approaches to cholestatic syndromes. Updating the Sperber proposal provides a new paradigm that addresses the advances in knowledge that have occurred.

Self-Association of the Anion of 7-Oxodeoxycholic Acid (Bile Salt): How Secondary Micelles Are Formed

Bile acid anions are steroidal biosurfactants that form primary micelles due to the hydrophobic effect. At higher concentrations of some bile acid anions, secondary micelles are formed; hydrogen bonds connect primary micelles. Monoketo derivatives of cholic acid, which have reduced membrane toxicity, are important for biopharmaceutical examinations. The main goal is to explain why the processes of formation of primary and secondary micelles are separated from each other, i.e., why secondary micelles do not form parallel to primary micelles. The association of the anion of 7-oxodeoxycholic acid (a monoketo derivative of cholic acid) is observed through the dependence of the spin-lattice relaxation time on total surfactant concentration T₁ = f(C_T). On the function T₁ = f(C_T), two sharp jumps of the spin-lattice relaxation time are obtained, i.e., two critical micellar concentrations (CMC). The aggregation number of the micelle at 50 mM total concentration of 7-oxodeoxycholic acid anions in the aqueous solution is 4.2 ± 0.3, while at the total concentration of 100 mM the aggregation number is 9.0 ± 0.9. The aggregation number of the micelle changes abruptly in the concentration interval of 80-90 mM (the aggregation number determined using fluorescence measurements). By applying Le Chatelier's principle, the new mechanism of formation of secondary micelles is given, and the decoupling of the process of formation of primary and secondary micelles at lower concentrations of monomers (around the first critical micellar concentration) and the coupling of the same processes at higher equilibrium concentrations of monomers (around the second critical micellar concentration) is explained. Stereochemically and thermodynamically, a direct mutual association of primary micelles is less likely, but monomeric units are more likely to be attached to primary micelles, i.e., 7-oxodeoxycholic acid anions.

Integration of Biorelevant Pediatric Dissolution Methodology into PBPK Modeling to Predict In Vivo Performance and Bioequivalence of Generic Drugs in Pediatric Populations: a Carbamazepine Case Study

This study investigated the impact of gastro-intestinal fluid volume and bile salt (BS) concentration on the dissolution of carbamazepine (CBZ) immediate release (IR) 100 mg tablets and to integrate these in vitro biorelevant dissolution profiles into physiologically based pharmacokinetic modelling (PBPK) in pediatric and adult populations to determine the biopredictive dissolution profile. Dissolution profiles of CBZ IR tablets (100 mg) were generated in 50-900 mL biorelevant adult fasted state simulated gastric and intestinal fluid (Ad-FaSSGF and Ad-FaSSIF), also in three alternative compositions of biorelevant pediatric FaSSGF and FaSSIF medias at 200 mL. This study found that CBZ dissolution was poorly sensitive to changes in the composition of the biorelevant media, where dissimilar dissolution (F2 = 46.2) was only observed when the BS concentration was changed from 3000 to 89 μM (Ad-FaSSIF vs Ped-FaSSIF 50% 14 BS). PBPK modeling demonstrated the most predictive dissolution volume and media composition to forecast the PK was 500 mL of Ad-FaSSGF/Ad-FaSSIF media for adults and 200 mL Ped-FaSSGF/FaSSIF media for pediatrics. A virtual bioequivalence simulation was conducted by using Ad-FaSSGF and/or Ad-FaSSIF 500 mL or Ped-FaSSGF and/or Ped-FaSSIF 200 mL dissolution data for CBZ 100 mg (reference and generic test) IR product. The CBZ PBPK models showed bioequivalence of the product. This study demonstrates that the integration of biorelevant dissolution data can predict the PK profile of a poorly soluble drug in both populations. Further work using more pediatric drug products is needed to verify biorelevant dissolution data to predict the in vivo performance in pediatrics.

Determining sequential micellization steps of bile salts with multi-CMC modeling

HYPOTHESIS

Bile salts exhibit complex concentration-dependent micellization in aqueous solution, rooted in a long-standing hypothesis of increasing size in bile aggregation that has historically focused on the measurement of only one CMC detected by a given method, without resolving successive stepwise aggregates. Whether bile aggregation is continuous or discrete, at what concentration does the first aggregate form, and how many aggregation steps occur, all remain as open questions.

EXPERIMENTS

Bile salt critical micelle concentrations (CMCs) were investigated with NMR chemical shift titrations and a multi-CMC phase separation modeling approach developed herein. The proposed strategy is to establish a correspondence of the phase separation and mass action models to treat the first CMC; subsequent micellization steps, involving larger micelles, are then treated as phase separation events.

FINDINGS

The NMR data and the proposed multi-CMC model reveal and resolve multiple closely spaced sequential preliminary, primary, and secondary discrete CMCs in dihydroxy and trihydroxy bile salt systems in basic (pH 12) solutions with a single model of one NMR data set. Complex NMR data are closely explained by the model. Four CMCs are established in deoxycholate below 100 mM (298 K, pH 12): 3.8 ± 0.5 mM, 9.1 ± 0.3 mM, 27 ± 2 mM, and 57 ± 4 mM, while three CMCs were observed in multiple bile systems, also under basic conditions. Global fitting leverages the sensitivity of different protons to different aggregation stages. In resolving these closely spaced CMCs, the method also obtains chemical shifts of these spectroscopically inaccessible (aka dark) states of the distinct micelles.

Self-assembly of bile salts and their mixed aggregates as building blocks for smart aggregates

The present communication offers a comprehensive overview of the self-assembly of bile salts emphasizing their mixed smart aggregates with a variety of amphiphiles. Using an updated literature survey, we have explored the dissimilar interactions of bile salts with different types of surfactants, phospholipids, ionic liquids, drugs, and a variety of natural and synthetic polymers. While assembling this review, special attention was also provided to the potency of bile salts to alter the size/shape of aggregates formed by several amphiphiles to use these aggregates for solubility improvement of medicinally important compounds, active pharmaceutical ingredients, and also to develop their smart delivery vehicles. A fundamental understanding of bile salt mixed aggregates will enable the development of new strategies for improving the bioavailability of drugs solubilized in newly developed potential hosts and to formulate smart aggregates of desired morphology for specific targeted applications. It enriches our existing knowledge of the distinct interactions exerted in mixed systems of bile salts with variety of amphiphiles. By virtue of this, researchers can get innovative ideas to construct novel nanoaggregates from bile salts by incorporating various amphiphiles that serve as a building block for smart aggregates for their numerous industrial applications.

Conductometric and Fluorescence Probe Analysis to Investigate the Interaction between Bioactive Peptide and Bile Salts: A Micellar State Study

The present work deals with the micellar state study of sodium cholate and sodium deoxycholate in the aqueous solution of a bioactive peptide, namely glycyl dipeptide, having different concentrations through conductivity and fluorescence methods at different temperatures. The data obtained from conductivity is plotted against the concentration of Bile salts, and CMC (critical micelle concentration) values are calculated. The results realized have been elucidated with reference to Glycyl dipeptide-bile salts hydrophobic/hydrophilic interactions existing in solution. In addition, the CMC values converted to mole fraction (Xcmc) values have been used to evaluate the standard thermodynamic factors of micellization viz., enthalpy H, free energy ΔGm0, and entropy (ΔSm0) which extract information regarding thermodynamic feasibility of micellar state, energy alteration, and the assorted interactions established in the existing (bile salts-water-glycyl dipeptide) system. Furthermore, the pyrene fluorescence spectrum has also been utilized to study the change in micro polarity induced by the interactions of bile salts with glycyl dipeptide and the aggregation action of bile salts. The decrease in modification in the ratio of intensities of first and third peaks i.e., (I1/I3) for the pyrene molecules in aqueous bile salts solution by the addition of dipeptide, demonstrates that the micelle polarity is affected by glycyl dipeptide. This ratio has also been utilized to determine CMC values for the studied system, and the results have been found to be in good correlation with observations made in conductivity studies.

Condensed Supramolecular Helices: The Twisted Sisters of DNA

Condensation of DNA helices into hexagonally packed bundles and toroids represents an intriguing example of functional organization of biological macromolecules at the nanoscale. The condensation models are based on the unique polyelectrolyte features of DNA, however here we could reproduce a DNA-like condensation with supramolecular helices of small chiral molecules, thereby demonstrating that it is a more general phenomenon. We show that the bile salt sodium deoxycholate can form supramolecular helices upon interaction with oppositely charged polyelectrolytes of homopolymer or block copolymers. At higher order, a controlled hexagonal packing of the helices into DNA-like bundles and toroids could be accomplished. The results disclose unknown similarities between covalent and supramolecular non-covalent helical polyelectrolytes, which inspire visionary ideas of constructing supramolecular versions of biological macromolecules. As drug nanocarriers the polymer-bile salt superstructures would get advantage of a complex chirality at molecular and supramolecular levels, whose effect on the nanocarrier assisted drug efficiency is a still unexplored fascinating issue.

Increasing the Robustness of Biopharmaceutical Precipitation Assays - Part II: Recommendations on the use of FaSSIF

Biopharmaceutical precipitation assays are an important in vitro tool to characterize the precipitation behavior of weakly basic drugs during their transit from the stomach into the small intestine. To mimic the intestinal fluids more closely, biorelevant media like Fasted State Simulated Intestinal Fluid (FaSSIF) and versions thereof are often applied. When applying UV analytics to measure the drug concentration during the transfer experiments, changes in the UV spectrum of the medium have been observed when FaSSIF was stored over a longer period of time or under accelerated conditions. Therefore, this study aimed at evaluating the stability of FaSSIF under various storage conditions. Furthermore, the impact of stressed FaSSIF on the supersaturation and precipitation behavior of ketoconazole was investigated. As a result of this study, it was demonstrated that the FaSSIF powder composition changes during storage, which, in turn, impacts the supersaturation and precipitation behavior of ketoconazole in in vitro transfer studies. Based on the results of this study, we provide recommendations on the application of FaSSIF in biopharmaceutical precipitation assays with the aim to increase reproducibility and enhance data reliability for those compounds where changing FaSSIF composition may impact the supersaturation and precipitation behavior.

Supplementation of Bile Acids and Lipase in Broiler Diets for Better Nutrient Utilization and Performance: Potential Effects and Future Implications – A Review

Bile acids are used for better emulsification, digestion and absorption of dietary fat in chicken, especially in early life. Similarly, exogenous lipases have also been used for the improvement of physiological limitation of the chicken digestive system. Owing to potential of both bile acids and lipases, their use has been increased in recent years, for better emulsification of dietary fat and improvement of growth performance in broilers. In the past, pancreatic lipases were used for supplementation, but recently, microbial lipase is getting attention in poultry industry as a hydrolysis catalyst. Bile acids strengthen the defence mechanism of body against bacterial endotoxins and also play a key role in lipid regulation and sugar metabolism as signaling molecules. It has been demonstrated that bile acids and lipases may improve feed efficiency by enhancing digestive enzyme activity and ultimately leading to better fat digestion and absorption. Wide supplemental range of bile acids (0.004% to 0.25%) and lipases (0.01% to 0.1%) has been used in broiler diets for improvement of fat digestibility and their performance. Combinations of different bile acids have shown more potential to improve feed efficiency (by 7.14%) even at low (0.008%) levels as compared to any individual bile acid. Lipases at a lower level of 0.03% have exhibited more promising potential to improve fat digestibility and feed efficiency. However, contradicting results have been published in literature, which needs further investigations to elucidate various nutritional aspects of bile acids and lipase supplementation in broiler diet. This review focuses on providing insight on the mechanism of action and potential application of bile acids and lipases in broiler diets. Moreover, future implications of these additives in poultry nutrition for enhancing nutrient utilization and absorption are also discussed.

Revealing the complex self-assembly behaviour of sodium deoxycholate in aqueous solution

HYPOTHESIS

Sodium deoxycholate is a natural bile salt produced by animals and fulfilling important physiological processes. It is also used as dispersive surfactant and building block for self-assembled architectures in biology and material science. Although long debated, the study of its self-assembly in water is hereto incomplete and the models of the known aggregates are still controversial. This background suggests a complex scenario likely missing of additional mesophases.

EXPERIMENTS

Electron and optical microscopy techniques were crossed with SAXS data for the research.

FINDINGS

Novel rod, sponge, vesicle, lamellae, nanotube phases and reversible transitions among them arise at conditions (concentration, pH, temperature, ionic strength, ionic composition) fitting the physiological working environment of sodium deoxycholate. These findings enlarge the perspective towards different directions. The integration of the previous literature with this work removes any interpretative contradiction since all the structures cover the entire spectrum of phases expected for surfactants, thus being explained according to the Israelachvili's scheme. It is not trivial that a single molecule can show such a high structural variability. This fact highlights a very versatile system. Probably it is not a coincidence that it occurs in a multitasking biomolecule. These results furnish fundamental knowledge to clarify the bile salts' role in vivo.

Highly Hydrophilic and Lipophilic Derivatives of Bile Salts

Lipophilicity of 15 derivatives of sodium cholate, defined by the octan-1-ol/water partition coefficient (log P), has been theoretically determined by the Virtual log P method. These derivatives bear highly hydrophobic or highly hydrophilic substituents at the C3 position of the steroid nucleus, being linked to it through an amide bond. The difference between the maximum value of log P and the minimum one is enlarged to 3.5. The partition coefficient and the critical micelle concentration (cmc) are tightly related by a double-logarithm relationship (VirtuallogP=-(1.00±0.09)log(cmcmM)+(2.79±0.09)), meaning that the Gibbs free energies for the transfer of a bile anion from water to either a micelle or to octan-1-ol differ by a constant. The equation also means that cmc can be used as a measurement of lipophilicity. The demicellization of the aggregates formed by three derivatives of sodium cholate bearing bulky hydrophobic substituents has been studied by surface tension and isothermal titration calorimetry. Aggregation numbers, enthalpies, free energies, entropies, and heat capacities, ΔCP,demic, were obtained. ΔCP,demic, being positive, means that the interior of the aggregates is hydrophobic.

Spectroscopic Investigation into the Binding of Ferulic Acid with Sodium Deoxycholate: Hydrophobic Force Versus Hydrogen Bonding

The binding of ferulic acid (FA) with sodium deoxycholate (NaDC) has been investigated using fluorescence and absorption measurements. The fluorescence probe technique of pyrene reveals that the presence of FA favors the micellization of NaDC, leading to the decreased critical micelle concentrations for the formation of NaDC micelles. As NaDC molecules change gradually from monomers via primary micelles into secondary micelles, the intensities of absorption and fluorescence spectra of FA increase at low NaDC concentrations, but decrease suddenly at intermediate NaDC concentrations, and finally increase again at high NaDC concentrations. These results corroborated well with FA fluorescence lifetime data suggesting that the aryl ring of FA hydrophobically binds to the convex surface of NaDC monomers, whereas the hydrogen bonding between FA and NaDC is significantly involved in NaDC primary micelles, which is gradually overcome by the hydrophobic interaction between FA and NaDC secondary micelles. The absorption and fluorescence spectra as well as the binding constant value of FA indicate the strong binding of FA in the large hydrophobic core of NaDC secondary micelles. At low FA concentrations, the measurement of FA anisotropy suggests that FA can increase the packing order of hydrophobic surfaces in NaDC secondary micelles, whereas the high amount of FA can greatly disrupt the packing structure of NaDC secondary micelles which is ascribed to the formation of FA dimers. The spectroscopic experiments outlined here present the binding events of FA with NaDC monomers and primary and secondary micelles, which are significantly related with the hydrophobic force and hydrogen bonding as well as the unique structural characteristics of bile salt.

Encapsulation and release of non-fluorescent crystal violet confined in bile-salt aggregates

In this work, the entrapment of non-fluorescent dye Crystal Violet (CV) in presence of bio-mimetic confined bile-salt aggregates has been studied. The photophysical characteristic properties of CV have been carried out by changing different kinds of hydrophilic head groups and hydrophobic skeletons of bile-salt aggregates (NaC, NaDC, NaTC and NaTGC). The main aim of this work is to modulate the solubility behaviour, fluorescence properties and elucidation of different kinds of non-covalent interaction of CV confined in bile-salt aggregates. To interpret the result, steady state absorption and fluorescence emission techniques have been employed. In aqueous buffer, the CV molecule is non-fluorescent in nature. The value of fluorescence quantum yield (Φ) is ∼10⁻⁴. It has been observed that CV confined in bile-salt aggregates becomes highly fluorescent in nature. The enhancement of ‘Φ’ value of CV in bile-salt aggregates is ∼1000 fold compared to that of aqueous buffer medium. It has also been observed that in the presence of different bile-salt aggregates, CV exhibits remarkable enhancement of absorption and fluorescence emission spectral behaviour. The ground state and the excited state binding constant values of CV in the presence of different bile-salt aggregates have been determined. Moreover, the release of the dye molecule from the confined bile-salt aggregates to the aqueous medium has been executed. It has been found that addition of a very minute concentration of KCl salt (100 nm) to the bile-salt aggregates leads to extreme modification of their photophysical properties of CV. The absorption, fluorescence intensity, fluorescence quantum yield, ground state and excited state binding constant values, partition coefficient and aggregation number of CV molecules entrapped in bile-salt aggregates significantly reduces by addition of KCl. This result clearly confirms that CV releases from the confined system to the aqueous medium.

In this work, the entrapment of non-fluorescent dye Crystal Violet (CV) in presence of bio-mimetic confined bile-salt aggregates has been studied.

Bioinspired Composite, pH-Responsive Sodium Deoxycholate Hydrogel and Generation 4.5 Poly(amidoamine) Dendrimer Improves Cancer Treatment Efficacy via Doxorubicin and Resveratrol Co-Delivery

Maximizing the antitumor efficacy of doxorubicin (DOX) with a new drug delivery strategy is always desired in the field of biomedical science. Because the clinical applications of DOX in the treatment of cancer is limited by the side effects related to the dose. Herein, we report the co-loading of DOX and resveratrol (RESV) using an injectable in situ formed sodium deoxycholate hydrogel (Na-DOC-hyd) at the pH of the tumor extracellular microenvironment. The sequential, controlled, and sustained release of RESV and DOX for synergistic antitumor effects was confirmed by entrapping G4.5-DOX in the RESV-loaded Na-DOC hydrogel (Na-DOC-hyd-RESV). The synergistic antitumor activity of Na-DOC-hyd-RESV+G4.5-DOX was assessed on HeLa cell xenograft tumor in BALB/c nude mice. In the MTT biocompatibility assay, both the G4.5 PAMAM dendrimer and Na-DOC-hyd exhibited negligible cytotoxicity up to the highest dose of 2.0 mg mL-1 in HeLa, MDA-MB-231, and HaCaT cells. The release profiles of DOX and RESV from the Na-DOC-hyd-RESV+G4.5-DOX confirmed the relatively rapid release of RESV (70.43 ± 1.39%), followed by that of DOX (54.58 ± 0.62%) at pH 6.5 in the 7 days of drug release studies. A single intratumoral injection of Na-DOC-hyd-RESV+G4.5-DOX maximally suppressed tumor growth during the 28 days of the treatment period. Na-DOC-hyd-RESV+G4.5-DOX did not cause any histological damage in the major visceral organs. Therefore, this Na-DOC-hydrogel for dual drugs (DOX and RESV) delivery at the pH of the tumor extracellular microenvironment is a promising, safe, and effective combination for antitumor chemotherapy.

Molecular Dynamics Simulations on Interindividual Variability of Intestinal Fluids: Impact on Drug Solubilization

Efficient delivery of oral drugs is dependent on their solubility in human intestinal fluid, a complex and dynamic fluid that contains colloidal structures composed of small molecules. These structures solubilize poorly water-soluble compounds, increasing their apparent solubility, and possibly their bioavailability. In this study, we conducted coarse-grained molecular dynamics simulations with data from duodenal fluid samples previously acquired from five healthy volunteers. In these simulations, we observed the self-assembly of mixed micelles of bile salts, phospholipids, and free fatty acids. The micelles were ellipsoids with a size range of 4–7 nm. Next, we investigated micelle affinities of three model drugs. The affinities in our simulation showed the same trend as literature values for the solubility enhancement of drugs in human intestinal fluids. This type of simulations is useful for studies of events and interactions taking place in the small intestinal fluid.

Bile acid transporter-mediated oral drug delivery

Bile acids are synthesized in the liver, stored in the gallbladder, and secreted into the duodenum at meals. Apical sodium-dependent bile acid transporter (ASBT), an ileal Na⁺-dependent transporter, plays the leading role of bile acid absorption into enterocytes, where bile acids are delivered to basolateral side by ileal bile acid binding protein (IBABP) and then released by organic solute transporter OSTα/β. The absorbed bile acids are delivered to the liver via portal vein. In this process called "enterohepatic recycling", only 5% of the bile acid pool (~3 g in human) is excreted in feces, indicating the large recycling capacity and high transport efficacy of ASBT-mediated absorption. Therefore, bile acid transporter-mediated oral drug delivery has been regarded as a feasible and potential strategy to improve the oral bioavailability. This review introduces the key factors in enterohepatic recycling, especially the mechanism of bile acid uptake by ASBT, and the development of bile acid-based oral drug delivery for ASBT-targeting, including bile acid-based prodrugs, bile acid/drug electrostatic complexation and bile acid-containing nanocarriers. Furthermore, the specific transport pathways of bile acid in enterocytes are described and the recent finding of lymphatic delivery of bile acid-containing nanocarriers is discussed.

Thermodynamic interference with bile acid demicelleization reduces systemic entry and injury during cholestasis

Bile acids (BA), with their large hydrophobic steroid nucleus and polar groups are amphipathic molecules. In bile, these exist as micelles above their critical micellar concentration (CMC). In blood at low concentrations, these exist as monomers, initiating cellular signals. This micellar to monomer transition may involve complex thermodynamic interactions between bile salts alone or with phospholipids, i.e. mixed micelles and the aqueous environment. We therefore went on to test if therapeutically relevant changes in temperature could influence micellar behavior of bile salts, and in turn whether this affected the biological responses in cells, and in vivo. Sodium taurocholate (STC) belongs to a major class of bile salts. STC has a CMC in the 5–8 mM range and its infusion into the pancreatic duct is commonly used to study pancreatitis. We thus studied micellar breakdown of STC using isothermal titration calorimetry (ITC), dynamic light scattering and cryogenic transmission electron microscopy. Under conditions relevant to the in vivo environment (pH 7.4, Na 0.15 M), ITC showed STC to have a U shaped reduction in micellar breakdown between 37 °C and 15 °C with a nadir at 25 °C approaching ≈90% inhibition. This temperature dependence paralleled pancreatic acinar injury induced by monomeric STC. Mixed micelles of STC and 1-palmitoyl, 2-oleyl phosphatidylcholine, a phospholipid present in high proportions in bile, behaved similarly, with ≈75% reduction in micellar breakdown at 25 °C compared to 37 °C. In vivo pancreatic cooling to 25 °C reduced the increase in circulating BAs after infusion of 120 mM (5%) STC into the pancreatic duct, and duct ligation. Lower BA levels were associated with improved cardiac function, reduced myocardial damage, shock, lung injury and improved survival independent of pancreatic injury. Thus micellar breakdown of bile salts is essential for their entry into the systemic circulation, and thermodynamic interference with this may reduce their systemic entry and consequent injury during cholestasis, such as from biliary pancreatitis.

Bile salts in digestion and transport of lipids

Because of their unusual chemical structure, bile salts (BS) play a fundamental role in intestinal lipid digestion and transport. BS have a planar arrangement of hydrophobic and hydrophilic moieties, which enables the BS molecules to form peculiar self-assembled structures in aqueous solutions. This molecular arrangement also has an influence on specific interactions of BS with lipid molecules and other compounds of ingested food and digestive media. Those comprise the complex scenario in which lipolysis occurs. In this review, we discuss the BS synthesis, composition, bulk interactions and mode of action during lipid digestion and transport. We look specifically into surfactant-related functions of BS that affect lipolysis, such as interactions with dietary fibre and emulsifiers, the interfacial activity in facilitating lipase and colipase anchoring to the lipid substrate interface, and finally the role of BS in the intestinal transport of lipids. Unravelling the roles of BS in the processing of lipids in the gastrointestinal tract requires a detailed analysis of their interactions with different compounds. We provide an update on the most recent findings concerning two areas of BS involvement: lipolysis and intestinal transport. We first explore the interactions of BS with various dietary fibres and food emulsifiers in bulk and at interfaces, as these appear to be key aspects for understanding interactions with digestive media. Next, we explore the interactions of BS with components of the intestinal digestion environment, and the role of BS in displacing material from the oil-water interface and facilitating adsorption of lipase. We look into the process of desorption, solubilisation of lipolysis, products and formation of mixed micelles. Finally, the BS-driven interactions of colloidal particles with the small intestinal mucus layer are considered, providing new findings for the overall assessment of the role of BS in lipid digestion and intestinal transport. This review offers a unique compilation of well-established and most recent studies dealing with the interactions of BS with food emulsifiers, nanoparticles and dietary fibre, as well as with the luminal compounds of the gut, such as lipase-colipase, triglycerides and intestinal mucus. The combined analysis of these complex interactions may provide crucial information on the pattern and extent of lipid digestion. Such knowledge is important for controlling the uptake of dietary lipids or lipophilic pharmaceuticals in the gastrointestinal tract through the engineering of novel food structures or colloidal drug-delivery systems.

Probing the molecular interactions between pharmaceutical polymeric carriers and bile salts in simulated gastrointestinal fluids using NMR spectroscopy

The number of poorly soluble new drugs is increasing and one of the effective ways to deliver such pharmaceutically active molecules is using hydrophilic polymers to form a solid dispersion. Bile salts play an important role in the solubilisation of poorly soluble compounds in the gastrointestinal tract (gut) prior to absorption. When a poorly water-soluble drug is delivered using a hydrophilic polymer based solid dispersion oral formulation, it is still unclear whether there are any polymer-bile salt interactions, which may influence the drug dissolution and solubilisation. This study, using two widely used hydrophilic model polymers, Hydroxypropyl methylcellulose (HPMC) and polyvynilpirrolidone (PVP), and sodium taurocholate (NaTC) as the model bile salt, aims to investigate the interactions between the polymers and bile salts in simulated fed state (FeSSIF) and fasted state (FaSSIF) gut fluids. The nature of the interactions was characterised using a range of NMR techniques. The results revealed that the aggregation behaviour of NaTC in FaSSIF and FeSSIF is much more complex than in water. The addition of hydrophilic polymers led to the occurrences of NaTC-HPMC and NaTC-PVP aggregation. For both systems, pH and ionic strength strongly influenced the aggregation behavior, while the ion type played a less significant role. The outcome of this study enriched the understanding of the aggregation behaviour of bile salts and typical hydrophilic pharmaceutical polymers in bio-relevant media. Due to the high surface-activity of the bile salts and their ability to interact with polymers, such aggregation behaviour is expected to play a role in drug solubilisation in the gut when the drug is delivered by hydrophilic polymer based dispersions.

Effect of Maltodextrin and Temperature on Micellar Behavior of Bile Salts in Aqueous Medium: Conductometric and Spectrofluorimetric Studies

Conductivity and fluorescence probe techniques have been employed to study the micellar behavior of bile salts i.e. sodium cholate (1–20 mmol⋅kg−1) and sodium deoxycholate (0.5–10.0 mmol⋅kg−1) in aqueous solutions of maltodextrin (0.0, 0.5, 1.1, and 1.6 mmol⋅kg−1) at different temperatures. The influence of maltodextrin on the micellization behavior of bile salts has been determined in terms of critical micelle concentration (CMC) values obtained from conductivity measurement. The variation in CMC values has been discussed by considering the alteration in the hydrophobic environment of maltodextrin-sodium cholate/sodium deoxycholate complex imparted by the carbohydrate molecules. In order to substantiate the CMC values determined from conductivity method, the fluorescence probe study of aqueous sodium cholate and sodium deoxycholate solutions in presence of fluorescent, pyrene has also been carried. The CMC values obtained from both techniques are in full agreement with each other. Moreover, application of charged pseudo-phase separation model has been made to discuss the thermodynamics of the system.

Incorporating physiologically relevant mobile phases in micellar liquid chromatography for the prediction of human intestinal absorption

Micellar liquid chromatography is a popular method used in the determination of a compound's lipophilicity. This study describes the use of the obtained micelle-water partition coefficient (log Pmw ) by such a method in the prediction of human intestinal absorption (HIA). As a result of the close resemblance of the novel composition of the micellar mobile phase to that of physiological intestinal fluid, prediction was deemed to be highly successful. The unique micellar mobile phase consisted of a mixed micellar mixture of lecithin and six bile salts, i.e. a composition matching that found in the human intestinal environment, prepared in ratios resembling those in the intestine. This is considered to be the first method to use a physiological mixture of biosurfactants in the prediction of HIA. As a result, a mathematical model with high predictive ability (R2 PRED  = 81%) was obtained using multiple linear regression. The micelle-water partition coefficient (log Pmw ) obtained from micellar liquid chromatography was found to be a successful tool for prediction where the final optimum model included log Pmw and polar surface area as key descriptors with high statistical significance for the prediction of HIA. This can be attributed to the nature of the mobile phase used in this study which contains the lecithin-bile salt complex, thus forming a bilayer system and therefore mimicking absorption across the intestinal membrane.

Stepwise Aggregation of Cholate and Deoxycholate Dictates the Formation and Loss of Surface-Available Chirally Selective Binding Sites

Bile salts are facially amphiphilic, naturally occurring chemicals that aggregate to perform numerous biochemical processes. Because of their unique intermolecular properties, bile salts have also been employed as functional materials in medicine and separation science (e.g., drug delivery, chiral solubilization, purification of single-walled carbon nanotubes). Bile micelle formation is structurally complex, and it remains a topic of considerable study. Here, the exposed functionalities on the surface of cholate and deoxycholate micelles are shown to vary from one another and with the micelle aggregation state. Collectively, data from NMR and capillary electrophoresis reveal preliminary, primary, and secondary stepwise aggregation of the salts of cholic (CA) and deoxycholic (DC) acid in basic conditions (pH 12, 298 K), and address how the surface availability of chirally selective binding sites is dependent on these sequential stages of aggregation. Prior work has demonstrated sequential CA aggregation (pH 12, 298 K) including a preliminary CMC at ca. 7 mM (no chiral selection), followed by a primary CMC at ca. 14 mM that allows chiral selection of binaphthyl enantiomers. In this work, DC is also shown to form stepwise preliminary and primary aggregates (ca. 3 mM DC and 9 mM DC, respectively, pH 12, 298 K) but the preliminary 3 mM DC aggregate is capable of chirally selective solubilization of the binaphthyl enantiomers. Higher-order, secondary bile aggregates of each of CA and DC show significantly degraded chiral selectivity. Diffusion NMR reveals that secondary micelles of CA exclude the BNDHP guests, while secondary micelles of DC accommodate guests, but with a loss of chiral selectivity. These data lead to the hypothesis that secondary aggregates of DC have an exposed binding site, possibly the 7α-edge of a bile dimeric unit, while secondary CA micelles do not present binding edges to the solution, potentially instead exposing the three alcohol groups on the hydrophilic α-face to the solution.

Bile Acid Recognition by Mouse Ileal Bile Acid Binding Protein

Ileal bile acid binding protein (I-BABP, gene name FABP6) is a component of the bile acid recycling system, expressed in the ileal enterocyte. The physiological role of I-BABP has been hypothesized to be either an intracellular buffering agent to protect against excess intracellular bile acids or separately as a modulator of bile acid controlled transcription. We investigated mouse I-BABP (mI-BABP) to understand the function of this protein family. Here, we studied energetics and site selectivity of binding with physiological bile acids using a combination of isothermal calorimetric analysis and NMR spectroscopy. We found that the most abundant bile acid in the mouse (β-muricholic acid) binds with weak affinity individually and in combination with other bile acids. Further analysis showed that mI-BABP like human I-BABP (hI-BABP) specifically recognizes the conjugated form of cholic acid:chenodeoxycholic acid (CA:CDCA) in a site-selective manner, displaying the highest affinity of any bile acid combination tested. These results indicate that I-BABP specifically recognizes the ligand combination of CDCA and CA, even in a species such as the mouse where CDCA only represents a trace component of the physiological pool. Specific and conserved recognition of the CDCA and CA ligand combination suggests that I-BABP may play a critical role in the regulation of bile acid signaling in addition to its proposed role as a buffering agent.

Self-Assembly of Lecithin and Bile Salt in the Presence of Inorganic Salt in Water: Mesoscale Computer Simulation

The influence of inorganic salt on the structure of lecithin/bile salt mixtures in aqueous solution is studied by means of dissipative particle dynamics simulations. We propose a coarse-grained model of phosphatidylcholine and two types of bile salts (sodium cholate and sodium deoxycholate) and also take into account the presence of low molecular weight salt. This model allows us to study the system on rather large time and length scales (up to about ∼20 μs and 50 nm) and to reveal mechanisms of experimentally observed increasing viscosity upon increasing the low molecular weight salt concentration in this system. We show that increasing the low molecular weight salt concentration induces the growth of cylinder-like micelles formed in lecithin/bile salt mixtures in water. These wormlike micelles can entangle into transient networks displaying perceptible viscoelastic properties. Computer simulation results are in good qualitative agreement with experimental observations.

Solubilization and Interaction Studies of Bile Salts with Surfactants and Drugs: a Review

In this review, bile salt, bile salt-surfactant, and bile salt-drug interactions and their solubilization studies are mainly focused. Usefulness of bile salts in digestion, absorption, and excretion of various compounds and their rare properties in ordering the shape and size of the micelles owing to the presence of hydrophobic and hydrophilic faces are taken into consideration while compiling this review. Bile salts as potential bio-surfactants to solubilize drugs of interest are also highlighted. This review will give an insight into the selection of drugs in different applications as their properties get modified by interaction with bile salts, thus influencing their solution behavior which, in turn, modifies the phase-forming behavior, microemulsion, and clouding phenomenon, besides solubilization. Finally, their future perspectives are taken into consideration to assess their possible uses as bio-surfactants without side effects to human beings.

Synthesis, self-assembly, and in vitro toxicity of fatty acids-modified Bletilla striata polysaccharide

Hydrophobic modification of Bletilla striata polysaccharide (BSP) was performed by grafting fatty acids to BSP backbone and then characterized on their physicochemical properties. All neutral derivatives were able to self-assemble into spherical particles within the size range of 250-400 nm, their size and critical micelle concentration decreased with increasing hydrophobicity and substitution degree of the fatty acids. Also, the BSP-stearic acid conjugates showed a preferable performance on hemolysis test and cytotoxicity analysis on HepG2 cells, which suggested their potential application as a drug delivery vector.

Parenteral dosage form development and testing of dimethyl trisulfide, as an antidote candidate to combat cyanide intoxication

This study focused on the solubility enhancement and the in vivo antidotal efficacy testing of a new potential cyanide (CN) countermeasure, dimethyl trisulfide (DMTS). Various FDA approved cyclodextrins (HPβCD, RMβCD, HPγCD), cosolvents (ethanol, polyethylene glycols, propylene glycol), surfactants (cremophor EL, cremophor RH 40, sodium cholate, sodium deoxycholate, polysorbate 80) and their combinations were applied. Based on the solubility enhancing potential of the tested systems, polysorbate 80 was chosen for further in vivo efficacy studies. A composition comprising 15% polysorbate 80 and 50 mg/ml DMTS with the applied DMTS dose of 100 mg/kg provided a therapeutic antidotal protection of 3.4 × LD₅₀. For comparison, the present therapy of sodium thiosulfate (TS) with the dose of 100 mg/kg provided only 1.1 × LD₅₀ protection, and at the dose of 200 mg/kg, the LD₅₀ was enhanced by 1.3 times. No difference in the therapeutic protection by DMTS was detected when the concentration of polysorbate 80 was increased to 20% (3.2 × LD₅₀ protection). These data demonstrate the potential importance of DMTS as a CN countermeasure, and the formulation comprising polysorbate 80 provides the base of an injectable intramuscular dosage form that can later serve as a CN antidotal kit suitable for mass scenario.

Biological Hydrogels Formed by Swollen Multilamellar Liposomes

The self-assembly of lecithin-bile salt mixtures in solutions has long been an important research topic, not only because they are both biosurfactants closely relevant to physiological functions but also for the potential biomedical applications. In this paper, we report an unusual biological hydrogel formed by mixing bile salts and lecithin at low bile salt/lecithin molar ratios (B0) in water. The gel can be prepared at a total lipid concentration as low as ∼15 wt %, and the solidlike property of the solutions was confirmed by dynamic rheological measurements. We used cryo-TEM and SAXS/SANS techniques to probe the self-assembled structure and clearly evidence that the gel is made up of jammed swollen multilamellar vesicles (liposomes), instead of typical fibrous networks found in conventional gels. A mechanism-based on the strong repulsion between bilayers due to the incorporation of negatively charged bile salts is proposed to explain the swelling of the liposomes. In addition to gel, a series of phases, including viscoelastic, gel-like, and low-viscosity fluids, can be created by increasing B0. Such a variety of phase behaviors are caused by the transformation of bilayers into cylindrical and spheroidal micelles upon the change of the effective molecular geometry with B0.

Molecular Dynamics Simulation of the Aggregation Patterns in Aqueous Solutions of Bile Salts at Physiological Conditions

Classical molecular dynamics simulations are employed to monitor the aggregation behavior of six bile salts (nonconjugated and glycine- and taurine-conjugated sodium cholate and sodium deoxycholate) with concentration of 10 mM in aqueous solution in the presence of 120 mM NaCl. There are 150 ns trajectories generated to characterize the systems. The largest stable aggregates are analyzed to determine their shape, size, and stabilizing forces. It is found that the aggregation is a hierarchical process and that its kinetics depends both on the number of hydroxyl groups in the steroid part of the molecules and on the type of conjugation. The micelles of all salts are similar in shape-deformed spheres or ellipsoids, which are stabilized by hydrophobic forces, acting between the steroid rings. The differences in the aggregation kinetics of the various conjugates are rationalized by the affinity for hydrogen bond formation for the glycine-modified salts or by the longer time needed to achieve optimum packing for the tauro derivatives. Evidence is provided for the hypothesis from the literature that the entirely hydrophobic core of all aggregates and the enhanced dynamics of the molecules therein should be among the prerequisites for their pronounced solubilization capacity for hydrophobic substances in vivo.

On the self-assembly of a tryptophan labeled deoxycholic acid

Self-assembly of peptides and bile acids has been widely investigated because of their biological role and their potential as a tool for the preparation of nanostructured biomaterials. We herein report both the synthesis and the self-association behavior of a compound that combines the aggregation properties of bile acid- and amino acid-based molecules. The derivative has been prepared by introducing a L-tryptophan residue into the C-3 position of the deoxycholic acid skeleton and resulted in an amphoteric fluorescent labeled bile acid that shows a pH-dependent self-assembly. Under alkaline conditions it assembles into 28 nm diameter tubules, thus showing a completely different behavior compared to the precursor bile acid, which forms micelles under similar conditions. Upon heating the tubules break and turn into micelles, leading to an increase in the exposure to water of the tryptophan residue. On the other hand, in acidic solutions it aggregates into elongated micelles that further self-assemble forming a gel network, when an electrolyte is added.

Determination of thermodynamic potentials and the aggregation number for micelles with the mass-action model by isothermal titration calorimetry: A case study on bile salts

The aggregation number (n), thermodynamic potentials (ΔG, ΔH, ΔS) and critical micelle concentration (CMC) for 6 natural bile salts were determined on the basis of both original and previously published isothermal titration calorimetry (ITC) data. Different procedures to estimate parameters of micelles with ITC were compared to a mass-action model (MAM) of reaction type: n⋅S⇌Mn. This analysis can provide guidelines for future ITC studies of systems behaving in accordance with this model such as micelles and proteins that undergo self-association to oligomers. Micelles with small aggregation numbers, as those of bile salts, are interesting because such small aggregates cannot be characterized as a separate macroscopic phase and the widely applied pseudo-phase model (PPM) is inaccurate. In the present work it was demonstrated that the aggregation number of micelles was constant at low concentrations enabling determination of the thermodynamic potentials by the MAM. A correlation between the aggregation number and the heat capacity was found, which implies that the dehydrated surface area of bile salts increases with the aggregation number. This is in accordance with Tanford's principles of opposing forces where neighbouring molecules in the aggregate are better able to shield from the surrounding hydrophilic environment when the aggregation number increases.

Structural and functional implications of the interaction between macrolide antibiotics and bile acids

Macrolide antibiotics, such as azithromycin and erythromycin, are in widespread use for the treatment of bacterial infections. Macrolides are taken up and excreted mainly by bile. Additionally, they have been implicated in biliary system diseases and to modify the excretion of other drugs through bile. Despite mounting evidence for the interplay between macrolide antibiotics and bile acids, the molecular details of this interaction remain unknown. Herein, we show by NMR measurements that macrolides directly bind to bile acid micelles. The topology of this interaction has been determined by solvent paramagnetic relaxation enhancements (solvent PREs). The macrolides were found to be bound close to the surface of the micelle. Increasing hydrophobicity of both the macrolide and the bile acid strengthen this interaction. Both bile acid and macrolide molecules show similar solvent PREs across their whole structures, indicating that there are no preferred orientations of them in the bile micelle aggregates. The binding to bile aggregates does not impede macrolide antibiotics from targeting bacteria. In fact, the toxicity of azithromycin towards enterotoxic E. coli (ETEC) is even slightly increased in the presence of bile, as was shown by effective concentration (EC50 ) values.

Bile salt recognition by human liver fatty acid binding protein

Fatty acid binding proteins (FABPs) act as intracellular carriers of lipid molecules, and play a role in global metabolism regulation. Liver FABP (L-FABP) is prominent among FABPs for its wide ligand repertoire, which includes long-chain fatty acids as well as bile acids (BAs). In this work, we performed a detailed molecular- and atomic-level analysis of the interactions established by human L-FABP with nine BAs to understand the binding specificity for this important class of cholesterol-derived metabolites. Protein-ligand complex formation was monitored using heteronuclear NMR, steady-state fluorescence spectroscopy, and mass spectrometry. BAs were found to interact with L-FABP with dissociation constants in the narrow range of 0.6-7 μm; however, the diverse substitution patterns of the sterol nucleus and the presence of side-chain conjugation resulted in complexes endowed with various degrees of conformational heterogeneity. Trihydroxylated BAs formed monomeric complexes in which single ligand molecules occupied similar internal binding sites, based on chemical-shift perturbation data. Analysis of NMR line shapes upon progressive addition of taurocholate indicated that the binding mechanism departed from a simple binary association equilibrium, and instead involved intermediates along the binding path. The co-linear chemical shift behavior observed for L-FABP complexes with cholate derivatives added insight into conformational dynamics in the presence of ligands. The observed spectroscopic features of L-FABP/BA complexes, discussed in relation to ligand chemistry, suggest possible molecular determinants of recognition, with implications regarding intracellular BA transport. Our findings suggest that human L-FABP is a poorly selective, universal BA binder.