Elemental Selenium for Electrochemical Energy Storage

KI mediated one-pot cascade reaction for synthesis of 1,3,4-selenadiazoles

An efficient catalytic system consisting of KI and K2S2O8 for a one-pot pseudo three-component cascade reaction in the preparation of a diverse array of 1,3,4-selenadiazole derivatives from easily accessible precursors aldehydes, hydrazine and elemental selenium is demonstrated in this paper. Here, KI is used as the surrogate of iodine and K2S2O8 as the oxidant. The key advantages of this protocol include an easy reaction set up, operational simplicity, high functional group tolerance and utilisation of low toxicity chemicals. Further, a radical quenching reaction was also performed to confirm the mechanistic pathway.

Anchoring and catalytic insights into bilayer C4N3 material for lithium-selenium batteries: a first-principles study

In the present work, a theoretical design for the viability of bilayer C4N3 (bi-C4N3) as a promising host material for Li-Se battery was conducted utilizing first-principles calculations. The AA- and AB-stacking configurations of bilayer C4N3 can effectively inhibit the shuttling of high-order polyselenides through the synergistic effect of physical confinement and strong Li-N bonds. Compared to conventional electrolytes, the AA- and AB-stacking bilayer C4N3 demonstrate enhanced adsorption capabilities for the polyselenides. The anchored structures of Se8 or Li2Sen (n = 1, 2, 4, 6, 8) molecules within the bilayer C4N3 exhibit high electrical conductivities, which are beneficial for enhancing the electrochemical performance. The catalytic effects of AA- and AB-stacking bilayer C4N3 were investigated by the reduction of Se8 and the energy barrier associated with the decomposition of Li2Se. The AA- and AB-stacking bilayer C4N3 can significantly decrease the activation barrier and promote the decomposition of Li2Se. The mean square displacement (MSD) curves reveal the pronounceably sluggish Li-ions diffusions in polyselenides within the AA- and AB-stacking bilayer C4N3, which in turn demonstrates the notable prospects in mitigating the shuttle effect.

Nontraditional Approaches To Enable High-Energy and Long-Life Lithium-Sulfur Batteries

ConspectusLithium-sulfur (Li-S) batteries are promising for automotive applications due to their high theoretical energy density (2600 Wh/kg). In addition, the natural abundance of sulfur could mitigate the global raw material supply chain challenge of commercial lithium-ion batteries that use critical elements, such as nickel and cobalt. However, due to persistent polysulfide shuttling and uncontrolled lithium dendrite growth, Li-S batteries using nonencapsulated sulfur cathodes and conventional ether-based electrolytes suffer from rapid cell degradation upon cycling. Despite significant improvements in recent decades, there is still a big gap between lab research and commercialization of the technology. To date, the reported cell energy densities and cycling life of practical Li-S pouch cells remain largely unsatisfactory.Traditional approaches to improving Li-S performance are primarily focused on confining polysulfides using electronically conductive hosts. However, these micro- and mesoporous hosts suffer from limited pore volume to accommodate high sulfur loading and the associated volume change during cycling. Moreover, they fail to balance adsorption-conversion of polysulfides during charge-discharge, leading to the formation of massive dead sulfur. Such hosts are themselves electrochemically inactive, which decreases the practical energy density. In contrast, a series of nontraditional approaches, paired with advances in multiscale mechanistic understanding, have recently demonstrated exciting performance outcomes not only in conventional coin cells but also in practical pouch cells.In this Account, we first introduce our novel cathode design strategies to overcome polysulfide shuttling and sluggish redox kinetics in thick S cathodes via selenium-sulfur chemistry and cathode host engineering. Next, we gain a mechanistic understanding of Li-S batteries in various types of electrolytes via a series of spectroscopic, nuclear magnetic resonance, and electrochemical methods. Meanwhile, a novel cathode solid electrolyte interphase encapsulation strategy via nonviscous highly fluorinated ether-based electrolyte is introduced. The established selection rule by investigating how solvating power retards the shuttle effect and induces robust cathode/solid-electrolyte interphase formation is also included. We then discuss how the synergistic interactions between rational cathode structures and electrolytes can be exploited to tailor the reaction pathways and kinetics of S cathodes under high mass loading and lean electrolyte conditions. In addition, a novel interlayer design to simultaneously overcome degradation processes (polysulfide shuttling and lithium dendrite formation) and accelerate redox reaction kinetics is presented. Finally, this Account concludes with an overview of the challenges and strategies to develop Li-S pouch cells with high practical energy density, long cycle life, and fast-charging capability.

Unveiling the anchoring and catalytic effect of Co@C3N3 monolayer as a high-performance selenium host material in lithium-selenium batteries: a first-principles study

Suppressing the shuttle effect of high-order polyselenides is crucial for the development of high-performance host materials in lithium-selenium (Li-Se) batteries. Using first-principles calculations, the feasibility of Co@C3N3 monolayer as selenium cathode host material for Li-Se batteries is systematically evaluated from the aspects of binding energy, charge transfer mechanism, and catalytic effect of polyselenides in the present work. The Co@C3N3 monolayer can effectively prevent the solubilization of high-order polyselenides with large binding energy and charge transfer resulting from the synergistic effect of Li-N and Co-Se bonds. The polyselenides are inclined to adsorb on the surface of Co@C3N3 monolayer instead of interacting with the electrolytes, which effectively inhibits the shuttling of high-order polyselenides and improves cycling stability. The cobalt participation improves the conductivity of C3N3 monolayer, and the semi-metallic characteristics of the Co@C3N3 monolayer are maintained after the adsorption of Li2Sen (n = 1, 2, 4, 6, 8) or Se8 clusters, which is advantageous for the utilization of active selenium material. The crucial catalytic role of the Co@C3N3 monolayer is evaluated by examining the reduction pathway of Se8 and the decomposition barrier of Li2Se, and the results highlight the capability of Co@C3N3 monolayer to enhance the utilization of selenium and promote the transition of Li2Se. Our present work could not only provide valuable insights into the anchoring and catalytic effect of Co@C3N3 monolayer, but also shed light on the future investigation on the high performance C3N3-based host materials for Li-Se batteries.

A Ternary Composite with Medium Adsorption Confirms Good Reversibility of Li-Se Batteries

For Li-Se batteries, cathode using carbonaceous hosts to accommodate Se performed modestly, whereas those applying metallic compounds with stronger chemical adsorption exhibited even more rapid capacity decay, the intrinsic reasons for which are still not clear. Herein, it is found that Se tends to precipitate on the surface of the electrode during cycling, and the precipitation speed depends on the polarization degree of the host. A further enhanced adsorption does not certainly generate better electrochemical activity, since hosts with overhigh adsorption ability are hard to desorb polyselenides, leading to catalyst passivation and rapid capacity decay. These findings encourage us to design a ternary anatase/rutile/titanium nitride (aTiO₂ /rTiO₂ /TiN@C) composite host, integrating good adsorption of TiO₂ and rapid electron transport ability of TiN, and introducing rutile to weaken overall adsorption. The aTiO₂ /rTiO₂ /TiN@C composite with medium adsorption not only avoids rapid loss of active substances in electrolyte but also slows down the precipitation speed of Se. As a result, the aTiO₂ /rTiO₂ /TiN@C/Se electrode delivered good rate capability(154 mA h g^-1 at 20 C) and good cycling stability(a low decay of 0.024% per cycle within 500 cycles at 2 C).

A critical analysis of sources, pollution, and remediation of selenium, an emerging contaminant

Selenium (Se) is an essential metalloid and is categorized as emerging anthropogenic contaminant released to the environment. The rise of Se release into the environment has raised concern about its bioaccumulation, toxicity, and potential to cause serious damages to aquatic and terrestrial ecosystem. Therefore, it is extremely important to monitor Se level in environment on a regular basis. Understanding Se release, anthropogenic sources, and environmental behavior is critical for developing an effective Se containment strategy. The ongoing efforts of Se remediation have mostly emphasized monitoring and remediation as an independent topics of research. However, our paper has integrated both by explaining the attributes of monitoring on effective scale followed by a candid review of widespread technological options available with specific focus on Se removal from environmental media. Another novel approach demonstrated in the article is the presentation of an overwhelming evidence of limitations that various researchers are confronted with to overcome achieving effective remediation. Furthermore, we followed a holistic approach to discuss ways to remediate Se for cleaner environment especially related to introducing weak magnetic field for ZVI reactivity enhancement. We linked this phenomenal process to electrokinetics and presented convincing facts in support of Se remediation, which has led to emerge 'membrane technology', as another viable option for remediation. Hence, an interesting, innovative and future oriented review is presented, which will undoubtedly seek attention from global researchers.

First-Principles Insights into the Relative Stability, Physical Properties, and Chemical Properties of MoSe2

A fascinating transition-metal dichalcogenide (TMDC) compound, MoSe₂, has attracted a lot of interest in electrochemical, photocatalytic, and optoelectronic systems. However, detailed studies on the structural stability of the various MoSe₂ polymorphs are still lacking. For the first time, the relative stability of 11 different MoSe₂ polymorphs (1H, 2H, 3H_a, 3H_b, 2T, 4T, 2R₁, 1T₁, 1T₂, 3T, and 2R₂) is proposed, and a detailed analysis of these polymorphs is carried out by employing the first-principles calculations based on density functional theory (DFT). We computed the physical properties of the polymorphs such as band structure, phonon, and elastic constants to examine the viability for real-world applications. The electronic properties of the involved polymorphs were calculated by employing the hybrid functional of Heyd, Scuseria, and Ernzerhof (HSE06). The energy band gap of the polymorphs (1H, 2H, 3H_a, 3H_b, 2T, 4T, and 2R₁) is in the range of 1.6-1.8 eV, coinciding with the experimental value for the polymorph 2H. The covalent bonding nature of MoSe₂ is analyzed from the charge density, charge transfer, and electron localization function. Among the 11 polymorphs, 1H, 2H, 2T, and 3H_b polymorphs are predicted as stable polymorphs based on the calculation of the mechanical and dynamical properties. Even though the 4T and 3H_a polymorphs' phonons are stable, they are mechanically unstable; hence, they are considered to be under a metastable condition. Additionally, we computed the direction-dependent elastic moduli and isotropic factors for both mechanically and dynamically stable polymorphs. Stable polymorphs are analyzed spectroscopically using IR and Raman spectra. The thermal stability of the polymorphs is also studied.

Trapping Lithium Selenides with Evolving Heterogeneous Interfaces for High-Power Lithium-Ion Capacitors

Transition metal selenides anodes with fast reaction kinetics and high theoretical specific capacity are expected to solve mismatched kinetics between cathode and anode in Li-ion capacitors. However, transition metal selenides face great challenges in the dissolution and shuttle problem of lithium selenides, which is the same as Li-Se batteries. Herein, inspired by the density functional theory calculations, heterogeneous can enhance the adsorption of Li₂ Se relative to single component selenide electrodes, thus inhibiting the dissolution and shuttle effect of Li₂ Se. A heterostructure material (denoted as CoSe₂ /SnSe) with the ability to evolve continuously (CoSe₂ /SnSe→Co/Sn→Co/Li₁₃ Sn₅ ) is successfully designed by employing CoSnO₃ -MOF as a precursor. Impressively, CoSe₂ /SnSe heterostructure material delivers the ultrahigh reversible specific capacity of 510 mAh g^-1 after 1000 cycles at the high current density of 4 A g^-1 . In situ XRD reveals the continuous evolution of the interface based on the transformation and alloying reactions during the charging and discharging process. Visualizations of in situ disassembly experiments demonstrate that the continuously evolving interface inhibits the shuttle of Li₂ Se. This research proposes an innovative approach to inhibit the dissolution and shuttling of discharge intermediates (Li₂ Se) of metal selenides, which is expected to be applied to metal sulfides or Li-Se and Li-S energy storage systems.

Bond modulation of MoSe2+x driving combined intercalation and conversion reactions for high-performance K cathodes

The urgent demand for large-scale global energy storage systems and portable electronic devices is driving the need for considerable energy density and stable batteries. Here, Se atoms are introduced between MoSe₂ layers (denoted as MoSe_2+x ) by bond modulation to produce a high-performance cathode for potassium-ion batteries. The introduced Se atoms form covalent Se-Se bonds with the Se in MoSe₂, and the advantages of bond modulation are as follows: (i) the interlayer spacing is enlarged which increases the storage space of K⁺; (ii) the system possesses a dual reaction mechanism, and the introduced Se can provide an additional conversion reaction when discharged to 0.5 V, which improves the capacity further; (iii) the Se atoms confined between MoSe₂ layers do not give rise to the shuttle effect. MoSe_2+x is compounded with rGO (MoSe_2+x -rGO) as a cathode for potassium-ion batteries and displays an ultrahigh capacity (235 mA h g^-1 at 100 mA g^-1), a long cycle life (300 cycles at 100 mA g^-1) and an extraordinary rate performance (135 mA h g^-1 at 1000 mA g^-1 and 89 mA h g^-1 at 2000 mA g^-1). Pairing the MoSe_2+x -rGO cathode with graphite, the full cell delivers considerable energy density compared to other K cathode materials. The MoSe_2+x -rGO cathode also exhibits excellent electrochemical performance for lithium-ion batteries. This study on bond modulation driving combined intercalation and conversion reactions offers new insights into the design of high-performance K cathodes.

Bimetallic CuSbSe2 : A Potential Anode Material for Sodium and Lithium-Ion Batteries with High-Rate Capability and Long-Term Stability

Bimetallic transition metal chalcogenides (TMCs) materials have emerged as attractive anodes for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) because of the high intrinsic electronic conductivity, rich redox sites and unique reaction mechanism. In this work, we report the synthesis and electrochemical properties of a novel bimetallic TMCs material CuSbSe₂ . The as-prepared anode delivers a high reversible capacity of 545.6  mA h g^-1 for SIBs and 592.6  mA h g^-1 for LIBs at a current density of 0.2 A g^-1 , and an excellent rate capability of 425.9  mA h g^-1 at 20 A g^-1 for SIBs and 226.0  mA h g^-1 at 10 A g^-1 for LIBs without any common-used surface modification or carbonaceous compositing. In addition, ex situ X-ray diffraction (XRD) and High-resolution transmission electron microscopy (HRTEM) reveal a combined conversion-alloying reaction mechanism of LIBs and NIBs. Our findings suggest bimetallic CuSbSe₂ could be a potential anode material for both SIBs and LIBs.

Cryo-EM Revealing the Origin of Excessive Capacity of the Se Cathode in Sulfide-Based All-Solid-State Li-Se Batteries

Selenium (Se), whose electronic conductivity is nearly 25 orders higher than that of sulfur (S) and whose theoretical volumetric capacity is 3254 mAh cm^-3, is considered as a potential alternative to S to overcome the poor electronic conductivity issue of the S cathode in the lithium (Li)-S battery. However, the study of the Li-Se battery, particularly a Li-Se all-solid-state battery (ASSB), is still in its infancy. Herein, we report the performance of Li-Se ASSBs at both room temperature (RT) and high temperature (HT, 50 °C), using a Li₁₀Si_0.3PS_6.9Cl_1.8 (LSPSCl) solid-state electrolyte and Li-In anode. With a Se loading of 7.6 mg cm^-2, the Li-Se battery displayed a record high reversible capacity of 6.8 mAh cm^-2 after 50 cycles at HT, which exceeds the theoretical areal capacity of 5.2 mAh cm^-2 for Se. Moreover, the RT Li-Se ASSB delivered an initial areal capacity of about 2 mAh cm^-2 at a current density of 1 A g^-1 for 1200 cycles with a capacity retention of 67%. Cryo-electron microscopy revealed that the excessive capacity of Se at HT can be attributed to the formation of a previously unknown S₅Se₄ phase during charging, which participated reversibly in a subsequent redox reaction. The formation of the S₅Se₄ phase originated from the reaction of Se with S, which was generated by the decomposition of LSPSCl at HT. These results unlock the electrochemistry of a Li-Se ASSB, suggesting that a Li-Se ASSB is a viable alternative to a Li-S battery for energy storage applications.

Gallium-Telluride-Based Composite as Promising Lithium Storage Material

Various applications of gallium telluride have been investigated, such as in optoelectronic devices, radiation detectors, solar cells, and semiconductors, owing to its unique electronic, mechanical, and structural properties. Among the various forms of gallium telluride (e.g., GaTe, Ga₃Te₄, Ga₂Te₃, and Ga₂Te₅), we propose a gallium (III) telluride (Ga₂Te₃)-based composite (Ga₂Te₃-TiO₂-C) as a prospective anode for Li-ion batteries (LIBs). The lithiation/delithiation phase change mechanism of Ga₂Te₃ was examined. The existence of the TiO₂-C hybrid buffering matrix improved the electrical conductivity as well as mechanical integrity of the composite anode for LIBs. Furthermore, the impact of the C concentration on the performance of Ga₂Te₃-TiO₂-C was comprehensively studied through cyclic voltammetry, differential capacity analysis, and electrochemical impedance spectroscopy. The Ga₂Te₃-TiO₂-C electrode showed high rate capability (capacity retention of 96% at 10 A g^-1 relative to 0.1 A g^-1) as well as high reversible specific capacity (769 mAh g^-1 after 300 cycles at 100 mA g^-1). The capacity of Ga₂Te₃-TiO₂-C was enhanced by the synergistic interaction of TiO₂ and amorphous C. It thereby outperformed the majority of the most recent Ga-based LIB electrodes. Thus, Ga₂Te₃-TiO₂-C can be thought of as a prospective anode for LIBs in the future.

Interface engineering in NiSe2/Ni2Co/CoSe2 heterostructures encapsulated in hollow carbon shells for high-rate Li-Se batteries

The sluggish conversion reaction and the accompanying huge volume fluctuation greatly hinder the application of lithium-selenium (Li-Se) batteries. Therefore, reasonably constructing stable carbonaceous hosts with efficient electrochemically active sites is particularly essential for promoting the development of Se cathodes. Herein, a metal-organic solid derived carbon host with multiple heterogeneous NiSe₂/Ni₂Co/CoSe₂ interfaces was fabricated via in situ selenization. The formation of multiple heterointerfaces introduced subtle atomic array distortions, which provided additional electrochemically active sites compared with single heterointerfaces. Besides, the establishment of a built-in electric field was favorable for electron transfer and the absorption of Li⁺, thereby accelerating the reaction kinetics. Depending on the hollow structure and the heterogeneous catalysts, Li-Se batteries with NiSe₂/Ni₂Co/CoSe₂@Se cathodes delivered reversible capacities of 503 and 324 mA h g^-1 after 900 and 2200 cycles at 1 and 12 C, respectively. This work revealed the synergistic mechanism of multiple heterostructures composed of a Ni₂Co alloy and in situ derived bimetallic selenides for Se cathodes and provided new insights into the exploitation of energy storage materials.

Cationic Covalent Organic Framework as Separator Coating for High-Performance Lithium Selenium Disulfide Batteries

Selenium disulfide that combines the advantages of S and Se elements is a new material for Li-chalcogen battery cathodes. However, like Li-S batteries, the shuttle effect seriously restricts the performance of Li-SeS2 batteries. In this work, we have synthesized a kind of nitrogen-rich lithophilic covalent organic framework (ATG-DMTZ-COF) as a separator coating material for Li-SeS2 batteries. Here, the N atom in the ATG-DMTZ-COF channel preferentially interacts with the lithium ion in the electrolyte to form N…Li bond, which significantly improves the diffusion coefficient of lithium ions during the charge and discharge. More importantly, we prove that the pore size of ATG-DMTZ-COF will decrease sharply because there is a large amount of TFSI- in the channel, and finally the shuttling of polysulfide and polyselenide is suppressed by the sieving effect. As a consequence, Li-SeS2 batteries using the ATG-DMTZ-COF separator coating show excellent performances with an initial discharge capacity of 1028.7 mAh g−1 at 0.5 C under a SeS2 loading of 2.38 mg cm−2. Furthermore, when the current density is 1C, the specific capacity of 404.7 mAh g−1 can be maintained after 700 cycles.

Amorphous Selenium and Crystalline Selenium Nanorods Graphene Composites as Cathode Materials for All-Solid-State Lithium Selenium Batteries

Selenium (Se) is an element in the same main group as sulfur and is characterized by high electrical conductivity and large capacity (675 mAh g⁻¹). Herein, a novel ultra‐high dispersion amorphous selenium graphene composite (a‐Se/rGO) was synthesized and a selenium nanorods graphene composite (b‐Se/rGO) was prepared by hydrothermal method as the cathode material for all solid‐state lithium−selenium (Li−Se) batteries, hoping to improve the efficiency and utilization rate of active substances in all solid‐state batteries. The all‐solid‐state batteries were assembled using a heated thawing electrolyte (2LiIHPN−LiI; HPN=3‐hydroxypropionitrile). The utilization rate of a‐Se/rGO was 103 % and the capacity was 697 mAh g⁻¹, which remained at 281 mAh g⁻¹ (41.6 % of the 675 mAh g⁻¹) after 30 cycles under 0.5 C. Notably, a‐Se/rGO showed excellent performance concerning its utilization rate, with a capacity of up to 610 mAh g⁻¹ at 2 C, due to the high availability of amorphous Se and the special properties of the electrolytes. However, in the charge and discharge cycles, the second discharge capacity of a‐Se/rGO was more significantly attenuated than that of the first discharge due to the formation of larger crystals of selenium during the charging process. The battery assembled using b‐Se/rGO maintained a capacity of 270.58 mAh g⁻¹ after 30 cycles (the retention rate of discharge capacity was 66.13 % compared with that in the first cycle). Through TEM and other relevant tests, it is speculated that amorphous selenium is conducive to capacity release, which, however, is affected by the formation of crystalline selenium after the first charge process.

An economical strategy towards the managing of selenium pollution from contaminated water: A current state-of-the-art review

During the last few decades, contamination of selenium (Se) in groundwater has turned out to be a major environmental concern to provide safe drinking water. The content of selenium in such contaminated water might range from 400 to 700 μg/L, where bringing it down to a safe level of 40 μg/L for municipal water supply employing appropriate methodologies is a major challenge for the global researcher communities. The current review focuses mostly on the governing selenium remediation technologies such as coagulation-flocculation, electrocoagulation, bioremediation, membrane-based approaches, adsorption, electro-kinetics, chemical precipitation, and reduction methods. This study emphasizes on the development of a variety of low-cost adsorbents and metal oxides for the selenium decontamination from groundwater as a cutting-edge technology development along with their applicability, and environmental concerns. Moreover, after the removal, the recovery methodologies using appropriate materials are analyzed which is the need of the hour for the reutilization of selenium in different processing industries for the generation of high valued products. From the literature survey, it has been found that hematite modified magnetic nanoparticles (MNP) efficiently adsorb Se (IV) (25.0 mg/g) from contaminated groundwater. MNP@hematite reduced Se (IV) concentration from 100 g/L to 10 g/L in 10 min at pH 4-9 using a dosage of 1 g/L. In 15 min, the magnetic adsorbent can be recycled and regenerated using a 10 mM NaOH solution. The adsorption and desorption efficiencies were over 97% and 82% for five consecutive cycles, respectively. To encourage the notion towards scale-up, a techno-economic evaluation with possible environmentally sensitive policy analysis has been introduced in this article to introspect the aspects of sustainability. This type of assessment is anticipated to be extremely encouraging to convey crucial recommendations to the scientific communities in order to produce high efficiency selenium elimination and further recovery from contaminated groundwater.

Toward Theoretical Capacity and Superhigh Power Density for Potassium-Selenium Batteries via Facilitating Reversible Potassiation Kinetics

Potassium-selenium (K-Se) batteries attract tremendous attention because of the two-electron transfer of the selenium cathode. Nonetheless, practical K-Se cells normally display selenium underutilization and unsatisfactory rate capability. Herein, we employ a synergistic spatial confinement and architecture engineering strategy to establish selenium cathodes for probing the effect of K⁺ diffusion kinetics on K-Se battery performance and improving the charge transfer efficiency at ultrahigh rates. By impregnating selenium into hollow and solid carbon spheres with similar diameters and porous structures, the obtained parallel Se/C composites possess nearly identical selenium loadings, molecular structures, and heterogeneous interfaces but enormously different paths for K⁺ diffusion. Remarkably, as the solid-state K⁺ diffusion distance is significantly reduced, the K-Se cell achieves 96% of 2e^- transfer capacity (647.1 mA h g^-1). Reversible capacities of 283.5 and 224.1 mA h g^-1 are obtained at 7.5 and 15C, respectively, corresponding to an unprecedented high power density of 8777.8 W kg^-1. Quantitative kinetic analysis demonstrated a twofold higher capacitive charge storage contribution and a 1 order of magnitude higher K⁺ diffusion coefficient due to the short K⁺ diffusion path. By combining the determination of potassiation products by ex situ characterization and density functional theory (DFT) calculations, it is identified that the kinetic factor is decisive for K-Se battery performances.

Unraveling the superior anchoring of lithium polyselenides to the confinement bilayer C2N: an efficient host material for lithium-selenium batteries

Carbonaceous materials with pores or bilayer spaces are a kind of potential host material to confine polyselenide diffusion and mitigate the shuttling effect. In the present work, a theoretical design of bilayer C₂N (bi-C₂N) as an efficient host material for lithium-selenium (Li-Se) batteries was explored by first-principles calculations. AA- and AB-stacking bilayer C₂N could alleviate the dissolution of high-order polyselenides through a synergistic effect of physical confinement and strong Li-N bonds. Lithium polyselenides prefer to anchor on AA- and AB-stacking bilayer C₂N instead of the commonly used electrolytes, showing their capabilities in suppressing the shuttle effect. Charge transfer occurs from Se₈ and Li₂Se_n molecules (LiPSes) to AA- and AB-stacking bilayer C₂N, giving rise to the formation of strong Li-N bonds. The AA- and AB-stacking LiPSes@C₂N systems possess high electrical conductivities, which is beneficial for high electrochemical performance. In addition, the reversible conversion mechanisms of Li₂Se_n in the AA- and AB-stacking bilayer C₂N are also investigated through the energy changes and decomposition reaction of the Li₂Se molecule, and the results indicate that AA- and AB-stacking bilayer C₂N facilitate the formation and decomposition of Li₂Se by decreasing the active energy barriers and improving the selenium utilization rates. Our present work could shed some light on a possible strategy for designing highly efficient bilayer host materials for high performance Li-Se batteries.

Facile Synthesis of Carbon Nanospheres with High Capability to Inhale Selenium Powder for Electrochemical Energy Storage

Carbon–selenium composite positive electrode (CSs@Se) is engineered in this project using a melt diffusion approach with glucose as a precursor, and it demonstrates good electrochemical performance for lithium–selenium batteries. X-ray diffraction (XRD) and scanning electron microscopy (SEM) with EDS analysis are used to characterize the newly designed CSs@Se electrode. To complete the evaluation, electrochemical characterization such as charge–discharge (rate performance and cycle stability), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) tests are done. The findings show that selenium particles are distributed uniformly in mono-sized carbon spheres with enormous surface areas. Furthermore, the charge–discharge test demonstrates that the CSs@Se cathode has a rate performance of 104 mA h g⁻¹ even at current density of 2500 mA g⁻¹ and can sustain stable cycling for 70 cycles with a specific capacity of 270 mA h g⁻¹ at current density of 25 mA g⁻¹. The homogeneous diffusion of selenium particles in the produced spheres is credited with an improved electrochemical performance.

Understanding the anchoring and catalytic effect of the Co@C2N monolayer in lithium-selenium batteries: a first-principles study

The practical applications of lithium-selenium (Li-Se) batteries are impeded due to the low utilization of active selenium, sluggish kinetics, and volume change. The development of highly efficient host materials to suppress high-order polyselenide shuttling and accelerate Li₂Se conversion is essential for Li-Se batteries. Herein, a theoretical design of a Co@C₂N monolayer as a host material for ultra-high areal capacity Li-Se batteries is proposed by first-principles calculations. The investigations of the lowest energy configurations, binding energies, and the charge transfer indicate that the Co@C₂N monolayer could alleviate the reciprocating motion of high-order polyselenides and improve the cycling performance. Further electronic property calculations show that the semi-metallic characteristics of the Co@C₂N monolayer material are retained even after chemical adsorption with Se₈ or Li₂Se_n molecules, which is beneficial for the utilization of active selenium. In addition, the crucial catalytic role of the Co@C₂N monolayer is investigated and the results indicate that the Co@C₂N monolayer could facilitate the formation and decomposition of Li₂Se molecules during the discharge and charge processes. Our present work would not only provide a deep understanding on the anchoring and catalytic effect of the Co@C₂N monolayer, but also demonstrate a general principle for the rational design and screening of advanced materials for high energy density Li-Se batteries.

An Emerging Energy Storage System: Advanced Na-Se Batteries

Sodium-selenium (Na-Se) batteries have aroused enormous attention due to the large abundance of the element sodium as well as the high electronic conductivity and volumetric capacity of selenium. In this battery system, some primary advances in electrode materials have been achieved, mainly involving the design of Se-based cathode materials. In this Review, the electrochemical mechanism is discussed, thus revealing the main challenges in Na-Se batteries. Then, the advances in the design of Se-based cathode materials for Na-ion storage are systemically summarized, classified, and discussed, including Se/carbon composite, Se/polar material/carbon composites, and hybrid Se_xS_y alloys. Some potential strategies enabling the improvement of crucial challenges and enhancement of electrochemical performance are also proposed to provide guidelines for the enhancements of Na-ion storage. An outlook for future valuable research directions is proposed to understand more deeply the electrochemical mechanism of Na-Se batteries and promote their further developments in full cell performance and commercialization.

Confined Selenium in N-Doped Mesoporous Carbon Nanospheres for Sodium-Ion Batteries

In this paper, we have adopted a simple and etching-free method to prepare mesoporous carbon spheres in one step. Selenium can be deposited in the internal cavity, which can avoid pulverization due to the combined effect of volume expansion and a solid-electrolyte interphase (SEI) film while charging and discharging. Therefore, the as-prepared selenium and nitrogen codoped mesoporous carbon nanosphere (Se@NMCS) composites can deliver an outstanding sodium-storage performance of 336.6 mAh g^-1 at a present density of 200 mA g^-1 and great long-cycling performance. For a further understanding of the Na⁺ storage mechanism of the Se@NMCS anode in sodium-ion batteries (SIBs), the phase evolution of the Se@NMCS anode has been explored during the charge/discharge process by conducting in situ Raman investigation.

State-Of-The-Art and Future Challenges in High Energy Lithium-Selenium Batteries

Li-chalcogen batteries, especially the Li-S batteries (LSBs), have received paramount interests as next generation energy storage techniques because of their high theoretical energy densities. However, the associated challenges need to be overcome prior to their commercialization. Elemental selenium, another chalcogen member, would be an attractive alternative to sulfur owing to its higher electronic conductivity, comparable capacity density, and moreover, excellent compatibility with carbonate electrolytes. Unlike LSBs, the research and development of Li-Se batteries (LSeBs) have garnered burgeoning attention but are still in their infant stage, where a comprehensive yet in-depth overview is highly imperative to guide future research. Herein, a critical review of LSeBs, in terms of the underlying mechanisms, cathode design, blocking layer engineering, and emerging solid-state electrolytes is provided. First, the electrolyte-dependent electrochemistry of LSeBs is discussed. Second, the advances in Se-based cathodes are comprehensively summarized, especially highlighting the state-of-the-art Se_x S_y cathodes, and mainly focusing on their structures, compositions, and synthetic strategies. Third, the versatile separators/interlayers optimization and interface regulation are outlined, with a particular focus on the emerging solid-state electrolytes for advanced LSeBs. Last, the remaining challenges and research orientations in this booming field are proposed, which are expected to motivate more insightful works.

Improved Cycle Stability of LiSn Alloy Anode for Different Electrolyte Systems in Lithium Battery

Lithium metal anode still confronts a series of problems at the way to commercialization though it has advantages in high energy density. The formation of Li dendrite is the major limitation need to be conquered. Here, a facile and simple LiSn alloy anode prepared by a direct metallurgy method is fabricated and evaluated in both liquid electrolyte and solid electrolyte. Structural analysis and electrochemical measurements reveal the promoted ionic transference of interface and enhanced cycling stability in different electrolyte systems, without dendrite formation. Furthermore, the application of this simple and sustainable LiSn alloy can be extended to more alloy anode and might unlock the next-generation anode in the future.

Unraveling the Nature of Excellent Potassium Storage in Small-Molecule Se@Peapod-Like N-Doped Carbon Nanofibers

The potassium-selenium (K-Se) battery is considered as an alternative solution for stationary energy storage because of abundant resource of K. However, the detailed mechanism of the energy storage process is yet to be unraveled. Herein, the findings in probing the working mechanism of the K-ion storage in Se cathode are reported using both experimental and computational approaches. A flexible K-Se battery is prepared by employing the small-molecule Se embedded in freestanding N -doped porous carbon nanofibers thin film (Se@NPCFs) as cathode. The reaction mechanisms are elucidated by identifying the existence of short-chain molecular Se encapsulated inside the microporous host, which transforms to K₂ Se by a two-step conversion reaction via an "all-solid-state" electrochemical process in the carbonate electrolyte system. Through the whole reaction, the generation of polyselenides (K₂ Se_n , 3 ≤ n ≤ 8) is effectively suppressed by electrochemical reaction dominated by Se₂ molecules, thus significantly enhancing the utilization of Se and effecting the voltage platform of the K-Se battery. This work offers a practical pathway to optimize the K-Se battery performance through structure engineering and manipulation of selenium chemistry for the formation of selective species and reveal its internal reaction mechanism in the carbonate electrolyte.

Glycerol-plasticized agarose separator suppressing dendritic growth in Li metal battery

The growth of dendrite is the major limitation to the development of the Li-metal battery. To solve it, we disclose the preparation and performances of separator (MAGly) with a complete "green" formulation using biosourced and sustainable compounds: agarose as biopolymer along with glycerol as plasticizing agent. The natural biopolymer films are non-porous in nature and possess high elasticity with high stiffness along a wide temperature range (-35 to 180 °C), able to prevent the perpendicular dendritic Li growth. Moreover, they provide high Li⁺ ionic conductivity, which was evident from electrochemical symmetrical battery tests resulted in efficient plating/stripping of Li metal, without dendrite formation. Preliminary tests in Li battery, with LiFePO₄ as positive electrode show very satisfying performance regarding the same test with the commercial Celgard® separator. Furthermore, the application of this new sustainable separator can be extended to post Li-metal system as demonstrated by the electrochemical tests realized with K⁺/K.

Synthesis of the Se-HPCF composite via a liquid-solution route and its stable cycling performance in Li-Se batteries

In pursuit of a one-dimensional (1D) porous carbon framework to restrain selenium for advanced lithium-selenium batteries, the Se-hierarchical porous carbon fiber composite (Se-HPCF) is synthesized via a liquid-solution route followed by calcination treatment. The unique architecture of the HPCF, which exhibits a large surface area and high pore volume, is fabricated using sodium lignosulfonate (LN) as a green pore-forming agent via electrospinning. As a cathode material for Li-Se batteries, the Se-HPCF composite exhibits superior electrochemical performance. A reversible capacity of 533 mA h g-1 is maintained at a rate of 0.2C after 50 cycles. In addition, the Se-HPCF composite delivers high rate performance with a high specific capacity of 351 mA h g-1 at 5C. The enhanced capacity retention and rate performance of Se-HPCF is generated by the 1D structure characteristics, and the liquid phase melting diffusion method could be applied to produce other related materials.

Functionalized MXenes as effective polyselenide immobilizers for lithium-selenium batteries: a density functional theory (DFT) study

The practical applications of lithium selenium (Li-Se) batteries are impeded primarily due to the dissolution and migration of higher-order polyselenides (Li₂Se_n) into the electrolyte (known as the shuttle effect) and inactive deposition of lower-order polyselenides. The high electrical conductivity and mechanical strength of MXenes make them a suitable candidate to provide adequate anchoring to prevent polyselenide dissolution and improved electrochemical performance. Herein, we used density functional theory (DFT) calculations to understand the binding mechanism of Li₂Se_n on graphene and surface-functionalized Ti₃C₂ MXenes. We used graphene as a reference material to assess Li₂Se_n binding strengths on functionalized Ti₃C₂X₂ (where X = S, O, F, and Cl). We observed that Ti₃C₂S₂ and Ti₃C₂O₂ exhibit superior anchoring behavior compared to graphene, Ti₃C₂F₂, and Ti₃C₂Cl₂. The calculated Li₂Se_n adsorption strengths, provided by S- and O-terminated Ti₃C₂, are greater than those of the commonly used ether-based electrolyte, which is a requisite for effective suppression of Li₂Se_n shuttling. Ti₃C₂X₂ and graphene with adsorbed Li₂Se_n retain their structural integrity without chemical decomposition. Density of states (DOS) analysis demonstrates that the conductive behavior of Ti₃C₂X₂ is preserved even after Li₂Se_n adsorption, which can provide electronic pathways to stimulate the redox electrochemistry of Li₂Se_n. Overall, our unprecedented simulation results reveal superior anchoring behavior of Ti₃C₂S₂ and Ti₃C₂O₂ for Li₂Se_n adsorption, and this developed understanding can be leveraged for designing carbon-free Ti₃C₂ MXene-based selenium cathode materials to boost the electrochemical performance of Li-Se batteries.

A Rational Reconfiguration of Electrolyte for High-Energy and Long-Life Lithium-Chalcogen Batteries

Lithium-chalcogen batteries are an appealing choice for high-energy-storage technology. However, the traditional battery that employs liquid electrolytes suffers irreversible loss and shuttle of the soluble intermediates. New batteries that adopt Li⁺ -conductive polymer electrolytes to mitigate the shuttle problem are hindered by incomplete discharge of sulfur/selenium. To address the trade-off between energy and cycle life, a new electrolyte is proposed that reconciles the merits of liquid and polymer electrolytes while resolving each of their inferiorities. An in situ interfacial polymerization strategy is developed to create a liquid/polymer hybrid electrolyte between a LiPF₆ -coated separator and the cathode. A polymer-gel electrolyte in situ formed on the separator shows high Li⁺ transfer number to serve as a chemical barrier against the shuttle effect. Between the gel electrolyte and the cathode surface is a thin gradient solidification layer that enables transformation from gel to liquid so that the liquid electrolyte is maintained inside the cathode for rapid Li⁺ transport and high utilization of active materials. By addressing the dilemma between the shuttle chemistry and incomplete discharge of S/Se, the new electrolyte configuration demonstrates its feasibility to trigger higher capacity retention of the cathodes. As a result, Li-S and Li-Se cells with high energy and long cycle lives are realized, showing promise for practical use.

Highly Reversible Cuprous Mediated Cathode Chemistry for Magnesium Batteries

Sluggish kinetics and poor reversibility of cathode chemistry is the major challenge for magnesium batteries to achieve high volumetric capacity. Introduction of the cuprous ion (Cu⁺ ) as a charge carrier can decouple the magnesiation related energy storage from the cathode electrochemistry. Cu⁺ is generated from a fast equilibrium between copper selenide electrode and Mg electrolyte during standing time, rather than in the electrochemical process. A reversible chemical magnesiation/de-magnesiation can be driven by this solid/liquid equilibrium. During a typical discharge process, Cu⁺ is reduced to Cu and drives the equilibrium to promote the magnesiation process. The reversible Cu to Cu⁺ redox promotes the recharge process. This novel Cu⁺ mediated cathode chemistry of Mg battery leads to a high reversible areal capacity of 12.5 mAh cm^-2 with high mass loading (49.1 mg cm^-2 ) of the electrode. 80 % capacity retention can be achieved for 200 cycles after a conditioning process.

Selenium-Infused Ordered Mesoporous Carbon for Room-Temperature All-Solid-State Lithium-Selenium Batteries with Ultrastable Cyclability

Selenium with a similar reaction mechanism with sulfur and a much higher electronic conductivity is considered to be a promising cathode for all-solid-state rechargeable batteries. Herein, selenium-infused ordered mesoporous carbon composites (Se/CMK-3) are successfully prepared by a melt-diffusion method from a ball-milled mixture of Se and CMK-3 (Se-CMK-3). Furthermore, their electrochemical performances are evaluated in all-solid-state lithium-selenium batteries at room temperature. Typically, Li/75%Li₂S-24%P₂S₅-1%P₂O₅/Li₁₀GeP₂S₁₂/Se/CMK-3 all-solid-state lithium-selenium batteries exhibit high reversible capacity of 488.7 mAh g^-1 at 0.05 C after 100 cycles. Even being cycled at 0.5C, it still maintains a discharge capacity of 268.7 mAh g^-1 after 200 cycles. The excellent electrochemical performances could be attributed to the enhanced electronic/ionic conductivities and structural integrity with the addition of the CMK-3 matrix.

New Insight into the Confinement Effect of Microporous Carbon in Li/Se Battery Chemistry: A Cathode with Enhanced Conductivity

Embedding the fragmented selenium into the micropores of carbon host has been regarded as an effective strategy to change the Li-Se chemistry by a solid-solid mechanism, thereby enabling an excellent cycling stability in Li-Se batteries using carbonate electrolyte. However, the effect of spatial confinement by micropores in the electrochemical behavior of carbon/selenium materials remains ambiguous. A comparative study of using both microporous (MiC) and mesoporous carbons (MeC) with narrow pore size distribution as selenium hosts is herein reported. Systematic investigations reveal that the high Se utilization rate and better electrode kinetics of MiC/Se cathode than MeC/Se cathode may originate from both its improved Li+ and electronic conductivities. The small pore size (<1.35 nm) of the carbon matrices not only facilitates the formation of a compact and robust solid-electrolyte interface (SEI) with low interfacial resistance on cathode, but also alters the insulating nature of Li₂ Se due to the emergence of itinerant electrons. By comparing the electrochemical behavior of MiC/Se cathode and the matching relationship between the diameter of pores and the dimension of solvent molecules in carbonate, ether, and solvate ionic liquid electrolyte, the key role of SEI film in the operation of C/Se cathode by quasi-solid-solid mechanism is also highlighted.

Printable Highly Stable and Superfast Humidity Sensor Based on Two Dimensional Molybdenum Diselenide

Transition metal dichalcogenides (TMDCs) are promising materials for sensing applications, due to their exceptional high performance in nano-electronics. Inherentely, the chemical and thermal responses of TMDCs are highly stable, hence, they pave way for real time sensor applications. This article proposes inceptively a stable and superfast humidity sensor using two-dimensional (2D) Molybdenum diselenide (MoSe₂) through printed technlogies. The 2D MoSe₂ ink is synthesized through wet grinding to achieve few-layered nano-flakes. Inter digital electrodes (IDEs) are fabricated via screen-printing on Polyethylene terephthalate (PET) substrate and thin film of MoSe₂ nano-flakes is fabricated through spin coating. The impedance and capacitance response are recorded at 1 kHz between temperature levels ranging from 20-30 °C. The impedance and capacitance hysteresis results are recorded <1.98% and <2.36%, respectively, ensuring very good repeatability during humidification and dehumidification. The stability of impedance and capacitance response are recorded with maximum error rate of ~ 0.162% and ~ 0.183%, respectively. The proposed sensor shows fast impedance response time (T_res) of ~ 0.96 s, and recovery time (T_rec) of ~ 1.03 s, which has T_res of ~ 1.87 s, and T_rec of ~ 2.13 s for capacitance. It is aimed to develop a high performance and stable humidity sensor for various monitoring applications.