Are thermoresponsive microgels model systems for concentrated colloidal suspensions? A rheology and small-angle neutron scattering study

Phase behavior of binary mixtures of hollow and regular microgels

Soft colloids are widely used to study glass transition, aging and jamming. A high size polydispersity is typically introduced in these systems to avoid crystal formation. Here, we use binary mixtures of hollow and regular microgels with comparable sizes to inhibit crystallization. The phase behavior of the mixture is probed as a function of the number fraction of hollow microgels and characterized by small-angle X-ray scattering. Molecular dynamic simulations are used to extract the particle-particle pair potential and obtain insight on their deformation. The results suggest that the high deformability of the hollow microgels offers an alternative route to maximize the entropy without crystal formation.

Measurable structure factors of dense dispersions containing polydisperse optically inhomogeneous particles

Here, it is investigated how optical properties of single scatterers in interacting multi-particle systems influence measurable structure factors. Both particles with linear gradients of their scattering length density and core-shell structures evoke characteristic deviations between the weighted sum 〈S(Q)〉 of partial structure factors in a multi-component system and experimentally accessible measurable structure factors S M(Q). While 〈S(Q)〉 contains only the structural information of self-organizing systems, S M(Q) is additionally influenced by the optical properties of their constituents, resulting in features such as changing amplitudes, additional peaks in the low-wavevector region or splitting of higher-order maxima, which are not related to structural reasons. It is shown that these effects can be systematically categorized according to the qualitative behaviour of the form factor in the Guinier region, which enables assessing the suitability of experimentally obtained structure factors to genuinely represent the microstructure of complex systems free from any particular model assumption. Hence, a careful data analysis regarding size distribution and optical properties of single scatterers is mandatory to avoid a misinterpretation of measurable structure factors.

Thermoresponsiveness Across the Physiologically Accessible Range: Effect of Surfactant, Cross-Linker, and Initiator Content on Size, Structure, and Transition Temperature of Poly(N-isopropylmethacrylamide) Microgels

The influence of surfactant, cross-linker, and initiator on the final structure and thermoresponse of poly(N-isopropylmethacrylamide) (pNIPMAM) microgels was evaluated. The goals were to control particle size (into the nanorange) and transition temperature (across the physiologically accessible range). The concentration of the reactants used in the synthesis was varied, except for the monomer, which was kept constant. The thermoresponsive suspensions formed were characterized by dynamic light scattering, small-angle X-ray scattering, atomic force microscopy, and rheology. Increasing surfactant, sodium dodecyl sulfate content, produced smaller microgels, as expected, into the nanorange and with greater internal entanglement, but with no change in phase transition temperature (LCST), which is contrary to previous reports. Increasing cross-linker, N,N-methylenebis acrylamide, content had no impact on particle size but reduced particle deformability and, again contrary to previous reports of decreases, progressively increased the LCST from 39 to 46 °C. The unusual LCST trends were confirmed using different rheological techniques. Initiator, potassium persulfate, content was found to weakly influence the outcomes. An optimized content was identified that provides functional nanogels in the 100 nm (swollen) size range with controlled LCST, just above physiological temperature. The study contributes chemistry-derived design rules for thermally responsive colloidal particles with physiologically accessible LCST for a variety of biomedical and soft robotics applications.

Salt-Induced Linker Dehydration Modulates Micellar Structure in Ether-Linked Sulfate Surfactants

Ether-linked surfactants are widely used in formulations such as liquid soaps, but despite their ubiquity, it is unclear how n-ethylene glycol linkers in surfactants, such as sodium lauryl n-(ethylene glycol) sulfate (SLEnS), influence micellar packing in the presence of NaCl. In the present work, we probe the structure and hydration of ether linkers in micelles comprising monodisperse SLEnS surfactants using contrast-variation small-angle neutron scattering (CV-SANS) and small-angle X-ray scattering (SAXS). Using SAXS, changes in micellar structure were observed for SLEnS (n = 1, 2, or 3) arising from the extent of ethoxylation. Scattering profiles indicated a clear transition from elongated cylindrical micelles to shorter ellipsoidal micelles with increasing ethoxylation. With CV-SANS, micellar structure and linker geometries of SLE3S were able to be resolved, indicating that a change in micellar architecture is modulated by dehydration of the tri(ethylene glycol) linker, offering new insights into the role of water and ions in the self-assembly of this key class of surfactants.

Tracking colloidal silica particles to evaluate their dispersion and interactions in concentrated suspensions under shear force applications

This study aimed to characterize interactions within colloidal silica particles in their concentrated suspensions, using rheo-confocal measurements and imaging, followed by image analysis. We studied the effect of shear rate (0-500 s-1) and solution pH (6, 10) on the dispersion degree of colloidal silica particles via the determination and comparison of interparticle distances and their modeling. Images corresponding to different shear rates were analyzed to identify the coordinates of the particles. These coordinates were further analyzed to calculate the distance among the particles and then their surface-to-surface distance normalized by the particle diameter (H/D). It was found that the population of the particles per unit area of the image and H/D varied with increasing shear rate. The comparison between experimentally measured and theoretically calculated H/D identified that for some particles, the former was shorter than the latter, indicating the unexpected attractions among them against the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Then, the modification of previously reported equations for H/D was suggested and confirmed its validity. Assuming pair potential interaction and hydrodynamic interaction were the main non-DLVO interactions, their magnitudes were calculated and confirmed the significance of pH and shear application strength on particle dispersion/coagulation.

Colloidal Nafion Particles: Are Cylinders Ubiquitous?

Colloidal Nafion morphology plays a critical role in determining the performance of fuel cells and electrolyzers. While small-angle neutron scattering (SANS) studies previously described Nafion in liquid media as dispersed cylinders, the analysis remains nonunique with multiple possible morphological descriptions of the data. Here, using SANS and all-atomistic molecular dynamics, we confirm that Nafion morphology in liquid media differs substantially depending on dispersing agent and dispersion method. H+ Nafion dispersed in N-methyl pyrrolidone forms swollen cluster particles with physically cross-linked ionic groups. Scattering profiles from dispersed Nafion membrane have a large structure factor feature not observed for redispersed Nafion D-521. H+ Nafion dispersed in water has a highly elongated cylindrical morphology (radius = 10 ± 1.5 Å, height = 358 ± 4.7 Å) with fully dissociated and solvated sulfonic acid groups on the particle wall. These results highlight an important discrepancy between the methods of preparing Nafion dispersions and the use of simplified analysis techniques to describe Nafion morphology.

Poly(N-isopropylacrylamide) microgel swelling behavior and suspension structure studied with small-angle neutron scattering

Microgels are of high interest for applications and as model systems due to their volume response to external stimuli. We use small-angle neutron scattering to measure the form and structure factors of poly(N-isopropylacrylamide) microgels in dilute and concentrated suspensions and find that microgels keep a constant size up to a concentration, above which they deswell. This happens before random-close packing. We emphasize suspension polydispersity must be considered to obtain accurate form and structure factors. Our results are compatible with microgel deswelling triggered by the osmotic pressure set by counterions associated to charged groups in the microgel periphery, which sharply increases when the counterion clouds surrounding the microgels percolate throughout the suspension volume.

Measuring the counterion cloud of soft microgels using SANS with contrast variation

The behavior of microgels and other soft, compressible colloids depends on particle concentration in ways that are absent in their hard-particulate counterparts. For instance, poly-N-isopropylacrylamide (pNIPAM) microgels can spontaneously deswell and reduce suspension polydispersity when concentrated enough. Despite the pNIPAM network in these microgels is neutral, the key to understanding this distinct behavior relies on the existence of peripheric charged groups, responsible for providing colloidal stability when deswollen, and the associated counterion cloud. When in close proximity, clouds of different particles overlap, effectively freeing the associated counterions, which are then able to exert an osmotic pressure that can potentially cause the microgels to decrease their size. Up to now, however, no direct measurement of such an ionic cloud exists, perhaps even also for hard colloids, where it is referred to as an electric double layer. Here, we use small-angle neutron scattering with contrast variation with different ions to isolate the change in the form factor directly related to the counterion cloud, and obtain its radius and width. Our results highlight that the modeling of microgel suspensions must unavoidably and explicitly consider the presence of this cloud, which exists for nearly all microgels synthesized today.

Buckling and Interfacial Deformation of Fluorescent Poly(N-isopropylacrylamide) Microgel Capsules

Hollow microgels are fascinating model systems at the crossover between polymer vesicles, emulsions, and colloids as they deform, interpenetrate, and eventually shrink at higher volume fraction or when subjected to an external stress. Here, we introduce a system consisting of microgels with a micrometer-sized cavity enabling a straightforward characterization in situ using fluorescence microscopy techniques. Similarly to elastic capsules, these systems are found to reversibly buckle above a critical osmotic pressure, conversely to smaller hollow microgels, which were previously reported to deswell at high volume fraction. Simulations performed on monomer-resolved in silico hollow microgels confirm the buckling transition and show that the presented microgels can be described with a thin shell model theory. When brought to an interface, these microgels, that we define as microgel capsules, strongly deform and we thus propose to utilize them to locally probe interfacial properties within a theoretical framework adapted from the Johnson-Kendall-Roberts (JKR) theory. Besides their capability to sense their environment and to address fundamental questions on the elasticity and permeability of microgel systems, microgel capsules can be further envisioned as model systems mimicking anisotropic responsive biological systems such as red blood and epithelial cells thanks to the possibility offered by microgels to be synthesized with custom-designed properties.

Solution and Solid-State Behavior of Amphiphilic ABA Triblock Copolymers of Poly(acrylic acid-stat-styrene)-block-poly(butyl acrylate)-block-poly(acrylic acid-stat-styrene)

A combination of statistical and triblock copolymer properties is explored to produce stable aqueous polymer dispersions suitable for the film formation. In order to perform an extensive structural characterization of the products in the dissolved, dispersed, and solid states, a wide range of symmetrical poly(acrylic acid-stat-styrene)_x-block-poly(butyl acrylate)_y-block-poly(acrylic acid-stat-styrene)_x, poly(AA-st-St)_x-b-PBA_y-b-poly(AA-st-St)_x, (x = 56, 108 and 140, y = 100–750; the AA:St molar ratio is 42:58) triblock copolymers were synthesized by reversible addition–fragmentation chain transfer (RAFT) solution polymerization using a bifunctional symmetrical RAFT agent. It is demonstrated that the amphiphilic statistical outer blocks can provide sufficient stabilization to largely hydrophobic particles in aqueous dispersions. Such a molecular design provides an advantage over copolymers composed only of homoblocks, as a simple variation of the statistical block component ratio provides an efficient way to control the hydrophilicity of the stabilizer block, which ultimately affects the copolymer morphology in solutions and solid films. It was found by small-angle X-ray scattering (SAXS) that the copolymers behaved as dissolved chains in methylethylketone (MEK) but self-assembled in water into stable and well-defined spherical particles that increased in size with the length of the hydrophobic PBA block. These particles possessed an additional particulate surface structure formed by the statistical copolymer stabilizer block, which self-folded through the hydrophobic interactions between the styrene units. SAXS and atomic force microscopy showed that the copolymer films cast from the MEK solutions formed structures predicted by self-consistent field theory for symmetrical triblock copolymers, while the aqueous dispersions formed structural morphologies similar to a close-packed spheres, as would be expected for copolymer particles trapped kinetically due to the restricted movement of the blocks in the initial aqueous dispersion. A strong correlation between the structural morphology and mechanical properties of the films was observed. It was found that the properties of the solvent cast films were highly dependent on the ratios of the hard [poly(AA-st-St)] and soft (PBA) blocks, while the aqueous cast films did not show such a dependence. The continuous phase of hard blocks, always formed in the case of the aqueous cast films, produced films with a higher elastic modulus and a lower extension-to-break in a comparison with the solvent-cast films.

How Softness Matters in Soft Nanogels and Nanogel Assemblies

Softness plays a key role in determining the macroscopic properties of colloidal systems, from synthetic nanogels to biological macromolecules, from viruses to star polymers. However, we are missing a way to quantify what the term "softness" means in nanoscience. Having quantitative parameters is fundamental to compare different systems and understand what the consequences of softness on the macroscopic properties are. Here, we propose different quantities that can be measured using scattering methods and microscopy experiments. On the basis of these quantities, we review the recent literature on micro- and nanogels, i.e. cross-linked polymer networks swollen in water, a widely used model system for soft colloids. Applying our criteria, we address the question what makes a nanomaterial soft? We discuss and introduce general criteria to quantify the different definitions of softness for an individual compressible colloid. This is done in terms of the energetic cost associated with the deformation and the capability of the colloid to isotropically deswell. Then, concentrated solutions of soft colloids are considered. New definitions of softness and new parameters, which depend on the particle-to-particle interactions, are introduced in terms of faceting and interpenetration. The influence of the different synthetic routes on the softness of nanogels is discussed. Concentrated solutions of nanogels are considered and we review the recent results in the literature concerning the phase behavior and flow properties of nanogels both in three and two dimensions, in the light of the different parameters we defined. The aim of this review is to look at the results on micro- and nanogels in a more quantitative way that allow us to explain the reported properties in terms of differences in colloidal softness. Furthermore, this review can give researchers dealing with soft colloids quantitative methods to define unambiguously which softness matters in their compound.

Transition in the Glassy Dynamics of Melts of Acid-Hydrolyzed Phytoglycogen Nanoparticles

The deformability, responsiveness, and tunability of soft nanoparticles (NPs) offer unique opportunities to learn about their complex properties and the interactions between particles. In the present study, we provide new insights into the physical properties of phytoglycogen (PG) NPs, which are soft, compact particles with a dendritic architecture that are produced in the kernels of sweet corn. In particular, we study PG NPs modified using acid hydrolysis, which not only reduces their diameter but also alters their stiffness, internal structure, and the interactions between particles in aqueous dispersions. We used steady shear rheology to determine the dependence of the relative zero-shear viscosity η_r of aqueous dispersions of acid-hydrolyzed PG NPs on the effective volume fraction ϕ_eff, which indicated a reduction in stiffness of the particles relative to that of native PG NPs. We quantified this difference by analyzing the nature of the colloidal glasses formed at high ϕ_eff. We measured a smaller value of the fragility index m for acid-hydrolyzed PG NP glasses than that for native PG NP glasses, indicating that acid-hydrolyzed PG NPs form stronger glasses and are therefore softer than native PG NPs. Unlike the native PG NPs, we observed a distinctive change in the character of the glass transition of the acid-hydrolyzed PG NPs as ϕ_eff was increased above ϕ_eff∼1: a crossover in the dependence of η_r on ϕ_eff from Vogel-Fulcher-Tammann behavior to a more gradual, Arrhenius-like behavior. By expressing the steady shear and oscillatory rheology data in terms of generalized Péclet numbers, we obtained collapse of the data onto master curves. We interpret this result in terms of the acid-hydrolyzed PG NPs predominantly interpenetrating neighboring particles at large ϕ_eff, for which fluctuations of the outer chains enhance the mobility of the particles and make α-relaxation times τ_α experimentally accessible.

Self-Assembly of Soluplus in Aqueous Solutions: Characterization and Prospectives on Perfume Encapsulation

Soluplus is an amphiphilic graft copolymer intensively studied as a micellar solubilizer for drugs. An extensive characterization of the nanostructure of its colloidal aggregates is still lacking. Here, we provide insights into the polymer's self-assembly in water, and we assess its use as an encapsulating agent for fragrances. The self-assembly properties of Soluplus aqueous solutions were studied over a wide concentration range (1-70% w/w) by means of small-angle neutron scattering (SANS), differential scanning calorimetry, NMR, and rheometry. SANS analyses revealed the presence of polymeric micelles with a fuzzy surface interacting via a 2-Yukawa potential, up to 15% w/w polymer. Increasing the polymer concentration up to 55% w/w led to tightly packed micelles described according to the Teubner-Strey model. The ability of Soluplus to encapsulate seven perfume molecules, 2-phenyl ethanol, l-carvone, linalool, florhydral, β-citronellol, α-pinene, and R-limonene, was then examined. We showed that the fragrance's octanol/water partition coefficient (log K_ow), widely used to characterize the solubilization capacity, is not sufficient to characterize such systems and the presence of specific functional groups or molecular conformation needs to be considered. In fact, the combination of SANS, NMR, confocal laser scanning microscopy, and confocal Raman microscopy showed that the perfumes, interacting with different regions of the polymer aggregates, are able to tune the systems' structures resulting in micelles, matrix-type capsules, core-shell capsules, or oil-in-water emulsions.

Viscoelastic necking dynamics between attractive microgels

HYPOTHESIS

Microgels can deform and interpenetrate and display colloid/polymer duality. The effective interaction of microgels in the collapsed state is governed by the interplay of polymer-solvent interfacial tension and bulk elasticity. A connecting neck is shown to mediate microgel interaction, but its temporal evolution has not been addressed. We hypothesize that the necking dynamics of attractive microgels exhibits liquid-like or solid-like behavior over different time and length scales.

EXPERIMENTS

We simulate the merging and pinching of attractive microgels with different crosslinking densities in explicit solvent using dissipative particle dynamics. The temporal coalescence dynamics of microgels is investigated and compared with simple liquid and polymeric droplets. We model the neck growth on long time scales using Maxwell model of polymer relaxation and compare the theoretical prediction with simulation data. The mechanical strength of the neck is characterized systematically via simulated pinch-off of microgels by steered molecular dynamics.

FINDINGS

We evidence a crossover in the coalescence dynamics reflecting the viscoelastic signature of microgels. In contrast to the common knowledge that viscoelastic materials respond elastically on short time scales, the early expansion of the microgel neck exhibits a linear behavior, similar to the viscous coalescence of liquid droplets. However, the late regime with arrested dynamics resembles sintering of solid particles. Through an analytical model relating microgel dynamics to neck growth, we show that the long-term behavior is governed by stress relaxation of the polymers in the neck region and predict an exponential decay in the rate of growth, which agrees favorably with the simulation. Different from coalescence, the thread thinning in microgel breakup primarily highlights its polymeric characteristics.

In situ characterization of crystallization and melting of soft, thermoresponsive microgels by small-angle X-ray scattering

Depending on the volume fraction and interparticle interactions, colloidal suspensions can form different phases, ranging from fluids, crystals, and glasses to gels. For soft microgels that are made from thermoresponsive polymers, the volume fraction can be tuned by temperature, making them excellent systems to experimentally study phase transitions in dense colloidal suspensions. However, investigations of phase transitions at high particle concentration and across the volume phase transition temperature in particular, are challenging due to the deformability and possibility for interpenetration between microgels. Here, we investigate the dense phases of composite core-shell microgels that have a small gold core and a thermoresponsive microgel shell. Employing Ultra Small-Angle X-ray Scattering, we make use of the strong scattering signal from the gold cores with respect to the almost negligible signal from the shells. By changing the temperature we study the freezing and melting transitions of the system in situ. Using Bragg peak analysis and the Williamson-Hall method, we characterize the phase transitions in detail. We show that the system crystallizes into an rhcp structure with different degrees of in-plane and out-of-plane stacking disorder that increase upon particle swelling. We further find that the melting process is distinctly different, where the system separates into two different crystal phases with different melting temperatures and interparticle interactions.

The fuzzy sphere morphology is responsible for the increase in light scattering during the shrinkage of thermoresponsive microgels

Thermoresponsive microgels undergo a volume phase transition from a swollen state under good solvent conditions to a collapsed state under poor solvent conditions. The most prominent examples of such responsive systems are based on poly-(N-isopropylacrylamide). When cross-linked with N,N'-methylenebisacrylamide, such microgels typically possess a fuzzy-spherelike morphology with a higher cross-linked core and a loosely cross-linked fuzzy shell. Despite the efforts devoted to understanding the internal structure of microgels and their kinetics during collapse/swelling, the origins of the accompanying changes in light scattering intensity have barely been addressed. In this work, we study core-shell microgels that contain small gold nanoparticle cores with microgel shells of different thicknesses and cross-linker densities. All microgels are small enough to fulfill the Rayleigh-Debye-Gans criterion at all stages of swelling. Due to the high X-ray contrast of the gold cores, we can use absolute intensity small-angle X-ray scattering to determine the number density in the dilute dispersions. This allows us to extract polymer volume fractions of the microgels at different stages of swelling from form factor analysis of small-angle neutron scattering data. We match our findings to results from temperature-dependent absorbance measurements. The increase in absorbance during the shrinkage of the microgels is related to the transition from fuzzy spheres to hard sphere-like scattering objects with a rather homogeneous density profile. We provide a first attempt to model experimental spectra using finite difference time domain simulations that take into account the structural changes during the volume phase transition. Our findings significantly contribute to the understanding of the optical properties of thermoresponsive microgels. Further, we provide polymer volume fractions and microgel refractive indices as a function of the swelling state.

Thermoresponsive Microgel-Based Free-Standing Membranes: Influence of Different Microgel Cross-Linkers on Membrane Function

In this study we show a possibility to produce thermoresponsive, free-standing microgel membranes based on N-isopropylacrylamide (NIPAM) and the UV-sensitive comonomer 2-hydroxy-4-(methacryloyloxy)benzophenone (HMABP). To influence the final network structure and functionality of the membranes, we use different cross-linkers in the microgel syntheses and characterize the resulting structural microgel properties and the swelling behavior by means of AFM, FTIR, and PCS measurements. Varying the cross-linker results in significant changes in the structure and swelling behavior of the individual microgels and has an influence on the incorporation of the comonomer, which is essential for subsequent photochemical membrane formation. We investigate the ion transport through the different membranes by temperature-dependent resistance measurements revealing a sharp increase in resistance when the copolymer microgels reach their collapsed state. The resistance of the membranes can be adjusted by different cross-linkers and the associated incorporation of the comonomer. Furthermore, we show that transferring a reversible cross-linker from a cross-linked state to an un-cross-linked state strongly influences the membrane properties and even reverses the switching behavior, while the mechanical stability of the membrane is maintained.

Comparative experimental and computational study of synthetic and natural bottlebrush polyelectrolyte solutions

We systematically investigate model synthetic and natural bottlebrush polyelectrolyte solutions through an array of experimental techniques (osmometry and neutron and dynamic light scattering) along with molecular dynamics simulations to characterize and contrast their structures over a wide range of spatial and time scales. In particular, we perform measurements on solutions of aggrecan and the synthetic bottlebrush polymer, poly(sodium acrylate), and simulations of solutions of highly coarse-grained charged bottlebrush molecules having different degrees of side-branch density and inclusion of an explicit solvent and ion hydration effects. While both systems exhibit a general tendency toward supramolecular organization in solution, bottlebrush poly(sodium acrylate) solutions exhibit a distinctive "polyelectrolyte peak" in their structure factor, but no such peak is observed in aggrecan solutions. This qualitative difference in scattering properties, and thus polyelectrolyte solution organization, is attributed to a concerted effect of the bottlebrush polymer topology and the solvation of the polymer backbone and counterions. The coupling of the polyelectrolyte topological structure with the counterion distribution about the charged polymer molecules along with direct polymer segmental hydration makes their solution organization and properties "tunable," a phenomenon that has significant ramifications for biological function and disease as well as for numerous materials applications.

Softness mapping of the concentration dependence of the dynamics in model soft colloidal systems

The dynamics of a series of soft colloids comprised of polystyrene cores with poly(N-isopropylacrylamide) (PNIPAM) coronas was investigated by diffusing wave spectroscopy (DWS). The modulus of the coronas was varied by changing the cross-link density and we were able to interpret the results within a hard-soft mapping framework. The soft, swellable particle properties were modeled using an extended Flory-Rehner theory and a Hertzian pair potential. Following volume fraction jumps, softness effects on the concentration dependence of dynamics were determined, with a 'soft colloids make strong glass-forming liquid'-type of behavior observed close to the nominal glass transition volume fraction, φ_g. Such behavior from the current systems cannot be fully explained by the osmotic deswelling model alone. However, inspired by the soft-hard mapping from Schmiedeberg et al, [Europhys. Lett. 2011, 96(3), 36010] we estimated effective hard-sphere diameters and achieved a successful mapping of the α-relaxation times to a master curve below φ_g. Above φ_g, the curves no longer collapse but show strong deviations from a Vogel-Fulcher type of divergence onto soft jamming plateaux. Our results provide evidence that osmotic deswelling itself cannot fully explain the observed dynamics. Softness also plays an important role in the dynamics of soft, concentrated colloids.

Soft synthetic microgels as mimics of mycoplasma

Artificial model colloids are of special interest in the development of advanced sterile filters, as they are able to efficiently separate pleomorphic, highly deformable and infectious bacteria such as mycoplasma, which, until now, has been considered rather challenging and laborious. This study presents a full range of different soft to super soft synthetic polymeric microgels, including two types with similar hydrodynamic mean diameter, i.e., 180 nm, and zeta potential, i.e., -25 ± 10 mV, but different deformability, synthesized by inverse miniemulsion terpolymerization of acrylamide, sodium acrylate and N,N'-methylenebisacrylamide. These microgels were characterized by means of dynamic, electrophoretic and static light scattering techniques. In addition, the deformability of the colloids was investigated by filter cake compressibility studies during ultrafiltration in dead-end mode, analogously to a study of real mycoplasma, i.e., Acholeplasma laidlawii, to allow for a direct comparison. The results indicate that the variation of the synthesis parameters, i.e., crosslinker content, polymeric solid content and content of sodium acrylate, has a significant impact on the swelling behavior of the microgels in aqueous solution as well as on their deformability under filtration conditions. A higher density of chemical crosslinking points results in less swollen and more rigid microgels. Furthermore, these parameters determine electrokinetic properties of the more or less permeable colloids. Overall, it is shown that these soft synthetic microgels can be obtained with tailor-made properties, covering the size of smallest species of and otherwise similar to real mycoplasma. This is a relevant first step towards the future use of synthetic microgels as mimics for mycoplasma.

Characterization of the volume fraction of soft deformable microgels by means of small-angle neutron scattering with contrast variation

The volume occupied by colloids in a suspension - namely the volume fraction - is the thermodynamic variable that determines the phase behavior of these systems. While for hard incompressible spheres this quantity is well defined, for soft compressible colloids such as microgels - polymeric crosslinked networks swollen in a good solvent - the determination of the real volume occupied by these particles in solution is particularly challenging. This fact depends on two aspects: first the surface and, therefore, the volume of the microgels is hard to define properly given their external fuzziness; second, microgels can osmotically deswell, deform or interpenetrate their neighbors, i.e. change their shape and size depending on the solution concentration. Here, the form factors of few hydrogenated microgels embedded in a matrix of deuterated but otherwise identical microgels are measured using small-angle neutron scattering with contrast variation. From the analysis of the scattering data, the variation of the volume of the microgels as a function of concentration is obtained and used to calculate the real microgel volume fraction in solution. Soft neutral microgels are shown to facet already at low concentrations while in contrast, harder microgels maintain their shape and change their volume.

Flexible Sample Environments for the Investigation of Soft Matter at the European Spallation Source: Part I—The In Situ SANS/DLS Setup

As part of the development of the new European Spallation Source (ESS) in Lund (Sweden), which will provide the most brilliant neutron beams worldwide, it is necessary to provide different sample environments with which the potential of the new source can be exploited as soon as possible from the start of operation. The overarching goal of the project is to reduce the downtimes of the instruments related to changing the sample environment by developing plug and play sample environments for different soft matter samples using the same general carrier platform and also providing full software integration and control by just using unified connectors. In the present article, as a part of this endeavor, the sample environment for in situ SANS and dynamic light scattering measurements is introduced.

Volume fraction determination of microgel composed of interpenetrating polymer networks of PNIPAM and polyacrylic acid

Interpenetrated polymer network microgels, composed of crosslinked networks of poly(N-isopropylacrylamide) and polyacrylic acid (PAAc), have been investigated through rheological measurements at four different amounts of PAAc. Both PAAc content and crosslinking degree modify particle dimensions, mass and softness, thereby strongly affecting the volume fraction and the system viscosity. Here the volume fraction is derived from the flow curves at low concentrations by fitting the zero-shear viscosity with the Einstein-Batchelor equation which provides a parameterkto shift weight concentration to volume fraction. We find that particles with higher PAAc content and crosslinker are characterized by a greater value ofkand therefore by larger volume fractions when compared to softer particles. The packing fractions obtained from rheological measurements are compared with those from static light scattering for two PAAc contents revealing a good agreement. Moreover, the behaviour of the viscosity as a function of packing fraction, at room temperature, has highlighted an Arrhenius dependence for microgels synthesized with low PAAc content and a Vogel-Fulcher-Tammann dependence for the highest investigated PAAc concentration. A comparison with the hard spheres behaviour indicates a steepest increase of the viscosity with decreasing particles softness. Finally, the volume fraction dependence of the viscosity at a fixed PAAc and at two different temperatures, below and above the volume phase transition, shows a quantitative agreement with the structural relaxation time measured through dynamic light scattering indicating that interpenetrated polymer network microgels softness can be tuned with PAAc and temperature and that, depending on particle softness, two different routes are followed.

Glass and Jamming Rheology in Soft Particles Made of PNIPAM and Polyacrylic Acid

The phase behaviour of soft colloids has attracted great attention due to the large variety of new phenomenologies emerging from their ability to pack at very high volume fractions. Here we report rheological measurements on interpenetrated polymer network microgels composed of poly(N-isopropylacrylamide) (PNIPAM) and polyacrylic acid (PAAc) at fixed PAAc content as a function of weight concentration. We found three different rheological regimes characteristic of three different states: a Newtonian shear-thinning fluid, an attractive glass characterized by a yield stress, and a jamming state. We discuss the possible molecular mechanisms driving the formation of these states.

Engulfing Behavior of Nanoparticles into Thermoresponsive Microgels: A Mesoscopic Simulation Study

The engulfing of nanoparticles into microgels provides a versatile platform to design nano- and microstructured materials with various shape anisotropies and multifunctional properties. Manipulating the spontaneous engulfment process remains elusive. Herein, we report a mesoscopic simulation study on the engulfing behavior of nanoparticles into thermoresponsive microgels. The effects of the multiple parameters, including binding strength, temperature, and nanoparticle size, are examined systematically. Our simulation results disclose three engulfing states at different temperatures, namely full-engulfing, half-engulfing, and surface contact. The engulfing depth is determined by the complementary balance of interfacial elastocapillarity. Specifically, the van der Waals interaction of hybrid microgel-nanoparticle offers the capillary force while the internally networked structure of microgel reinforces the elasticity repulsion. Our study, validated by relevant experimental results, provides a mechanistic understanding of the interfacial elastocapillarity for nanoparticle-microgels.

Absence of crystals in the phase behavior of hollow microgels

Solutions of microgels have been widely used as model systems to gain insight into atomic condensed matter and complex fluids. We explore the thermodynamic phase behavior of hollow microgels, which are distinguished from conventional colloids by a central cavity. Small-angle neutron and x-ray scattering are used to probe hollow microgels in crowded environments. These measurements reveal an interplay among deswelling, interpenetration, and faceting and an unusual absence of crystals. Monte Carlo simulations of model systems confirm that, due to the cavity, solutions of hollow microgels more readily form a supercooled liquid than for microgels with a cross-linked core.

Apparatus for simultaneous dynamic light scattering-small angle neutron scattering investigations of dynamics and structure in soft matter

Dynamic Light Scattering (DLS) and Small-Angle Neutron Scattering (SANS) are two key tools to probe the dynamic and static structure factors, respectively, in soft matter. Usually, DLS and SANS measurements are performed separately, in different laboratories, on different samples, and at different times. However, this methodology has particular disadvantages for a large variety of soft materials, which exhibit a high sensitivity to small changes in fundamental parameters, such as waiting times, concentration, pH, and ionic strength. Here, we report on a new portable DLS-SANS apparatus that allows one to simultaneously measure both the microscopic dynamics (through DLS) and the static structure (through SANS) on the same sample. The apparatus has been constructed as a collaboration between two laboratories, each an expert in one of the scattering methods, and was commissioned on the LOQ and ZOOM SANS instruments at the ISIS Pulsed Neutron and Muon Source, U.K.

Microstructure-driven self-assembly and rheological properties of multi-responsive soft microgel suspensions

HYPOTHESES

The deformation and swelling ability of microgels is influenced by the crosslinking distribution. Varying microgels microstructure is expected to obtain suspensions with different flow behavior and thereby, different rheological properties.

EXPERIMENTS

Different multi-responsive microgels were synthesized using two different crosslinkers and varying their amounts: N,N-methylene bis-acrylamide (MBA) and oligo(ethylene glycol) diacrylate (OEGDA). The rheological results were obtained by zero-shear viscosity and long-time creep measurements on concentrated microgel suspensions Microgel microstructure was analyzed by ¹H nuclear magnetic resonance transverse relaxation measurements.

FINDINGS

At a constant crosslinking rate, we show that the viscosity of OEGDA-crosslinked microgels diverges at a higher concentration than MBA ones, suggesting a looser shell and less restricted dangling chains at the periphery for the later. By scaling with the effective volume fraction, the viscosity curves of the different microgel suspensions reduce into a single curve and closely follow hard sphere models up to ϕ_eff < 0.45. The results from creep tests revealed a much higher yield stress for MBA-crosslinked microgels, strengthening the hypothesis of a looser shell for the later. Finally, transverse relaxation (T₂) NMR measurements demonstrated that, although all microgels exhibit a core-shell microstructure, MBA samples present a less crosslinked shell corroborating with the rheological results.

Cellulosic fabric treated with hyperbranched polyethyleneimine derivatives for improving antibacterial, dyeing, pH and thermo-responsive performance

Having cotton fabrics with multifunctional properties is of the most research focused on using either different processes or new and different materials. Improving thermo - responsive and antibacterial properties of cotton fabrics decorated with silver nanoparticles and nanogel has been investigated. During this research silver nanoparticles (AgNPs) have been in situ prepared using poly(N-isopropyl acrylamide)/polyethyleneimine microgel. Prepared particles have been characterized, visualized their morphological structure and their particle through microscopic analysis, which proved that their particle size was in range of (6-10 nm). The decorated gel with silver nanoparticles has been functionalized with silicone compounds to produce hybrid material. The produced gel has been characterized for its pH, temperature, textural, rheological, antimicrobial, cytotoxicity, and conductivity properties. The functional properties of the treated and untreated fabrics have been investigated, and the results proved that treated fabric has conductivity, antibacterial, pH and thermo-responsive properties.

Phase behavior of ultrasoft spheres show stable bcc lattices

The phase behavior of supersoft spheres is explored using solutions of ultralow cross-linked poly(N-isopropylacrylamide)-based microgels as a model system. For these microgels, the effects of the electric charges on their surfaces can be neglected and therefore only the role of softness on the phase behavior is investigated. The samples show a liquid-to-crystal transition at higher volume fraction with respect to both hard spheres and stiffer microgels. Furthermore, stable body centered cubic (bcc) crystals are observed in addition to the expected face centered cubic (fcc) crystals. Small-angle x-ray and neutron scattering with contrast variation allow the characterization of both the microgel-to-microgel distance and the architecture of single microgels in crowded solutions. The measurements reveal that the stable bcc crystals depend on the interplay between the collapse and the interpenetration of the external shell of the ultralow cross-linked microgels.

Tuning the Encapsulation of Simple Fragrances with an Amphiphilic Graft Copolymer

The encapsulation of poorly water-soluble compounds such as perfumes, flavors, and bioactive molecules is a key step in the formulation of a large variety of consumer products in the fields of household care and personal care. We study the encapsulation ability of an amphiphilic poly(ethylene glycol)-graft-poly(vinyl acetate) (PEG-g-PVAc) graft copolymer, extending the focus to the entire phase diagram of polymer/perfume/water systems with three common natural fragrances. The three perfume molecules (2-phenyl ethanol, L-carvone, and α-pinene) possess different water affinities, as expressed by their octanol/water partition coefficients. The investigation of the polymorphism of PEG-g-PVAc in these systems is carried out by means of dynamic light scattering, small-angle X-ray scattering, NMR spectroscopy, and confocal laser scanning microscopy. The results presented here demonstrate that the choice of fragrance can dramatically affect the supramolecular structures formed by the polymer in aqueous solution, with important consequences on formulations of industrial interest such as the demixing of complex perfume blends when one or more of the components have no chemical affinity for any of the polymer blocks.

Macro- and Microstructural Evolution during Drying of Regenerated Cellulose Beads

The macro- and microstructural evolution of water swollen and ethanol swollen regenerated cellulose gel beads have been determined during drying by optical microscopy combined with analytical balance measurements, small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering (WAXS). Two characteristic length scales, which are related to the molecular dimension of cellulose monomer and elongated aggregates of these monomers, could be identified for both types of beads by SAXS. For ethanol swollen beads, only small changes to the structures were detected in both the SAXS and WAXS measurements during the entire drying process. However, the drying of cellulose from water follows a more complex process when compared to drying from ethanol. As water swollen beads dried, they went through a structural transition where elongated structures changed to spherical structures and their dimensions increased from 3.6 to 13.5 nm. After complete drying from water, the nanostructures were characterized as a combination of rodlike structures with an approximate size of cellulose monomers (0.5 nm), and spherical aggregates (13.5 nm) without any indication of heterogeneous meso- or microporosity. In addition, WAXS shows that cellulose II hydrate structure appears and transforms to cellulose II during water evaporation, however it is not possible to determine the degree of crystallinity of the beads from the present measurements. This work sheds lights on the structural changes that occur within regenerated cellulose materials during drying and can aid in the design and application of cellulosic materials as fibers, adhesives, and membranes.

Simulation of interpenetrating networks microgel synthesis

In this paper, we have implemented the sequential template synthesis of interpenetrating network (IPN) microgels in computer simulations and studied the behavior of such particles. We explored the influence of the interaction between the components of primary and secondary networks on the polymerization process and determined the necessary conditions for IPN particle formation. The interconnection between the parameters of synthesis and topological properties of the resulting microgels was investigated. We studied the morphologies of microgels in "good", "poor" and "selective" solvents. For the first time, we demonstrated the possibility of the formation of shell-corona structures in IPN microgels obtained by in silico synthesis from monomers and exposed to a selective solvent. These results allow for the better understanding of the required experimental conditions and data interpretation such as static structure factors.

Controlling the morphology of microgels by ionic stimuli

Stimuli-responsive microgels have attracted much interest for their use as vehicles for drug delivery or as the building blocks of adaptive materials. Ionic microgel particles, including popular poly(NIPAM-co-acrylic acid), show strong mechanical responsiveness to many external stimuli, including changes in ionic strength or acidity. In this work, we demonstrate that combining multiple ionic stimuli can enable detailed control over the morphology of microgels. To this extent, we analyze the particle morphology in various surroundings with light-scattering techniques. First, we find strong indications of an inverted density profile in the core of the particles. Secondly, we show that the swelling of this hydrogel core and the corona of dangling polymer ends can be targeted separately by a combination of deionization and deprotonation steps. Hence, this work represents an advance in tailoring particle morphologies after synthesis in a predictable fashion.

Correlation of droplet elasticity and volume fraction effects on emulsion dynamics

The rheological properties of emulsions are of considerable importance in a diverse range of scenarios. Here we describe a superposition of the effects of droplet elasticity and volume fraction on the dynamics of emulsions. The superposition is governed by physical interactions between droplets, and provides a new mechanism for modifying the flow behavior of emulsions, by controlling the elasticity of the dispersed phase. We investigate the properties of suspensions of emulsified wormlike micelles (WLM). Dense suspensions of the emulsified WLM droplets exhibit thermally responsive properties in which the viscoelastic moduli decrease by an order of magnitude over a temperature range of 0 °C to 25 °C. Surprisingly, the dependence of modulus on volume fraction is independent of droplet stiffness. Instead, the emulsion modulus scales as a power-law with volume fraction with a constant exponent across all temperatures even as the droplet properties change from elastic to viscous. Nevertheless, the underlying droplet dynamics depend strongly on temperature. From stress relaxation experiments, we quantify droplet dynamics across the cage breaking time scale below which the droplets are locally caged by neighbors and above which the droplets escape their cages to fully relax. For elastic droplets and high volume fractions, droplets relax less stress on short time scales and the terminal relaxations are slower than for viscous droplets and lower volume fractions. Characteristic measures of the short and long-time dynamics are highly correlated for variations in both temperature and emulsion concentration, suggesting that thermal and volume fraction effects represent independent parameters to control emulsion properties.

Photopolymerized Starchstarch Nanoparticle (SNP) network hydrogels

Starch is an attractive biomaterial given its low cost and high protein repellency, but its use in forming functional hydrogels is limited by its high viscosity and crystallinity. Herein, we demonstrate the use of fully amorphous starch nanoparticles (SNPs) as functional hydrogel building blocks that overcome these challenges. Methacrylation of SNPs enables hydrogel formation via photopolymerization, with the low viscosity of SNPs enabling facile preparation of pre-gel suspensions of up to 35 wt% SNPs relative to <10 wt% with linear starch. Small angle neutron scattering indicates a significantly different microstructure in SNP-based hydrogels compared to linear starch-based hydrogels due to the balance between inter- and intra-particle crosslinks, consistent with SNPs forming denser and stiffer hydrogels. Functionalized SNPs are highly cytocompatible at degree of substitution values <0.25 and, once gelled, can effectively repel cell adhesion. The physicochemical versatility and biological functionality of SNP-based hydrogels offer potential in various applications.

Quantifying nanoparticles in clays and soils with a small-angle X-ray scattering method

Clays and soils produce strong small-angle X-ray scattering (SAXS) because they contain large numbers of nanoparticles, namely allophane and ferrihydrite. These nanoparticles are amorphous and have approximately spherical shape with a size of around 3-10 nm. The weight ratios of these nanoparticles will affect the properties of the clays and soils. However, the nanoparticles in clays and soils are not generally quantified and are sometimes ignored because there is no standard method to quantify them. This paper describes a method to quantify nanoparticles in clays and soils with SAXS. This is achieved by deriving normalized SAXS intensities from unit weight of the sample, which are not affected by absorption. By integrating the normalized SAXS intensities over the reciprocal space, one obtains a value that is proportional to the weight ratio of the nanoparticles, proportional to the square of the difference of density between the nanoparticles and the liquid surrounding the nanoparticles, and inversely proportional to the density of the nanoparticles. If the density of the nanoparticles is known, the weight ratio of the nanoparticles can be calculated from the SAXS intensities. The density of nanoparticles was estimated from the chemical composition of the sample. Nanoparticles in colloidal silica, silica gels, mixtures of silica gel and α-aluminium oxide, and synthetic clays have been quantified with the integral SAXS method. The results show that the errors of the weight ratios of nanoparticles are around 25% of the weight ratio. It is also shown that some natural clays contain large fractions of nanoparticles; montmorillonite clay from the Mikawa deposit, pyrophillite clay from the Shokozan deposit and kaolinite clay from the Kanpaku deposit contain 25 (7), 10 (2) and 19 (5) wt% nanoparticles, respectively, where errors are shown in parentheses.

Flow properties reveal the particle-to-polymer transition of ultra-low crosslinked microgels

Exploiting soft, adaptive microgels as building blocks for soft materials with controlled and predictable viscoelastic properties is of great interest for both industry and fundamental research. Here the flow properties of different poly(N-isopropylacrylamide) (pNIPAM) microgels are compared: regularly crosslinked versus ultra-low crosslinked (ULC) microgels. The latter are the softest microgels that can be produced via precipitation polymerization. The viscosity of ULC microgel suspensions at low concentrations can be described with models typically used for hard spheres and regularly crosslinked microgels. In contrast, at higher concentrations, ULC microgels show a much softer behavior compared to regularly crosslinked microgels. The increase of the storage modulus with concentration discloses that while for regularly crosslinked microgels the flow properties are mainly determined by the more crosslinked core, for ULC microgels the brush-like interaction is dominant at high packing fractions. Both the flow curves and the increase of the storage modulus with concentration indicates that ULC microgels can form glass and even reach an apparent jammed state despite their extreme softness. In contrast, the analysis of oscillatory frequency sweep measurements show that when approaching the glass transition the ultra-low crosslinked microgels behave as the regularly crosslinked microgels. This is consistent with a recent study showing that in this concentration range the equilibrium phase behavior of these ULC microgels is the one expected for regularly crosslinked microgels.

Synthesis of smart dual-responsive microgels: correlation between applied surfactants and obtained particle morphology

Thermo- and pH-responsive copolymer microgels were obtained by surfactant-assisted precipitation polymerization of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc). The surfactants used were sodium dodecylsulfate (SDS), dodecyltrimethylammonium bromide (DTAB) and the nonionic n-octyl-β-d-glucopyranoside (C8G1). We investigate the influence of the surfactants on the acrylic acid incorporation rate, the particle size, particle morphology, and the swelling behaviour at pH 4 and pH 7, at which AAc is neutral or charged, respectively. It is shown that each surfactant has a specific influence, which is connected to its role in the polymerization mechanism and its charge. A combined FTIR and PCS study reveals that the particles undergo a temperature-induced change in microstructure, even if the particle hydrodynamic radius does not change significantly.

Concentration dependence of the dynamics of microgel suspensions investigated by dynamic light scattering

The dynamics of colloidal gel particle suspensions, i.e., microgel suspensions, has been investigated by dynamic light scattering (DLS) over a wide concentration range from the (I) dilute (φ < φcp) to the (II) intermediate (φ ≈ φcp) and (III) high concentration regions (φ ≫ φcp), where φ and φcp are the volume fraction of the gel particles in the suspension and the random close packing fraction, φcp ≈ 0.64, respectively. The time-intensity correlation function exhibited a distinct change with increasing φ, i.e., from ergodic behaviour (region I and II) to nonergodic behaviour (region III). A mode transition from translational (region I) to cooperative diffusion (the so-called gel mode) (region II) was also observed due to the soft and deformable nature of the microgels. Different from the dynamics of hard colloidal glass suspensions, the gel mode remained even at φ ≫ φcp. By using the ensemble-averaged time-correlation function, IE, we quantify the relationship between φ and their dynamics, and show that the soft microgels are deswollen in the densely packed state.