Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

Aminoacid functionalised magnetite nanoparticles Fe3O4@AA (AA = Ser, Cys, Pro, Trp) as biocompatible magnetite nanoparticles with potential therapeutic applications

Magnetic nanoparticles (MNPs) are of great interest for their wide applications in biomedical applications, such as bioimaging, antitumoral therapies, regenerative medicine, and drug delivery. The work aimed to obtain biocompatible magnetite nanoparticles coated with amino acids of the general formula Fe3O4@AA (AA = L-tryptophan, L-serine, L-proline and L-cysteine) for potential therapeutic application in anticancer drug delivery. The obtained materials were characterised using XRD, FTIR, DLS analysis, SEM, thermogravimetry (TG), differential scanning calorimetry (DSC), and UV-vis spectroscopy. The photocatalytic, cytotoxic and antimicrobial activity tests of the obtained materials were carried out. The choice of amino acid determines the properties of the material and its future use, for example, Fe3O4@Cys supports radical production, which may increase the efficiency of catalytic degradation, while tryptophan captures radicals, which may be an advantage in several biomedical applications. Fe3O4@Trp exhibited good antimicrobial activity (MBEC and MIC) against E. coli ATCC 25922, P. aeruginosa ATCC 27853 and C. albicans ATCC 10231 while Fe3O4@Pro exhibited the best results against S. aureus ATCC 25923.

Reductive Photodegradation of 4,4'-Isopropylidenebis(2,6-dibromophenol) on Fe3O4 Surface

BACKGROUND

Advanced Oxidation Processes (AOPs) are the water treatment techniques that are commonly used forthe decomposition of the non-biodegradable organic pollutants. However, some pollutants are electron deficient and thus resistant to attack by reactive oxygen species (e.g., polyhalogenated compounds) but they may be degraded under reductive conditions. Therefore, reductive methods are alternative or supplementary methods to the well-known oxidative degradation ones.

METHODS

In this paper, the degradation of 4,4'-isopropylidenebis(2,6-dibromophenol) (TBBPA, tetrabromobisphenol A) using two Fe₃O₄ magnetic photocatalyst (F1 and F2) is presented. The morphological, structural and surface properties of catalysts were studied. Their catalytic efficiency was evaluated based on reactions under reductive and oxidative conditions. Quantum chemical calculations were used to analyse early steps of degradation mechanism.

RESULTS

The studied photocatalytic degradation reactions undergo pseudo-first order kinetics. The photocatalytic reduction process follows the Eley-Rideal mechanism rather than the commonly used Langmuir-Hinshelwood mechanism.

CONCLUSIONS

The study confirms that both magnetic photocatalyst are effective and assure reductive degradation of TBBPA.

Non-stoichiometric magnetite as catalyst for the photocatalytic degradation of phenol and 2,6-dibromo-4-methylphenol - a new approach in water treatment

Phenol and 2,6-dibromo-4-methylphenol (DBMP) were removed from aqueous solutions by ozonolysis and photocatalysis. The properties and structural features of the catalysts and the organic compounds are discussed, as well as their influence on the degradation reaction rates. The degradation efficiency in photocatalytic processes was higher for DBMP (98%) than for phenol (approximately 50%). This proves the high efficiency of magnetite in the photocatalytic degradation of halogenated aromatic pollutants. The particularly high degradation efficiency regarding halogen-containing DBMP molecules and the yield of bromide ions indicate that DBMP degradation follows a mixed reduction-oxidation mechanism. DBMP molecules interact with the magnetite surface, enabling them to react with the available electrons, and, as a result, bromide ions can be released. The results confirm that magnetite is an effective photocatalyst in the degradation of halogenated aromatic pollutants.

Role of Defect Engineering and Surface Functionalization in the Design of Carbon Nanotube-Based Nitrogen Oxide Sensors

Nitrogen oxides (NOx) are among the main atmospheric pollutants; therefore, it is important to monitor and detect their presence in the atmosphere. To this end, low-dimensional carbon structures have been widely used as NOx sensors for their outstanding properties. In particular, carbon nanotubes (CNTs) have been widely used as toxic-gas sensors owing to their high specific surface area and excellent mechanical properties. Although pristine CNTs have shown promising performance for NOx detection, several strategies have been developed such as surface functionalization and defect engineering to improve the NOx sensing of pristine CNT-based sensors. Through these strategies, the sensing properties of modified CNTs toward NOx gases have been substantially improved. Therefore, in this review, we have analyzed the defect engineering and surface functionalization strategies used in the last decade to modify the sensitivity and the selectivity of CNTs to NOx. First, the different types of surface functionalization and defect engineering were reviewed. Thereafter, we analyzed experimental, theoretical, and coupled experimental-theoretical studies on CNTs modified through surface functionalization and defect engineering to improve the sensitivity and selectivity to NOx. Finally, we presented the conclusions and the future directions of modified CNTs as NOx sensors.

Functionalized carbon nanotubes: synthesis, properties and applications in water purification, drug delivery, and material and biomedical sciences

Carbon nanotubes (CNTs) are considered as one of the ideal materials due to their high surface area, high aspect ratio, and impressive material properties, such as mechanical strength, and thermal and electrical conductivity, for the manufacture of next generation composite materials. In spite of the mentioned attractive features, they tend to agglomerate due to their inherent chemical structure which limits their application. Surface modification is required to overcome the agglomeration and increase their dispersability leading to enhanced interactions of the functionalized CNTs with matrix materials/polymer matrices. Recent developments concerning reliable methods for the functionalization of carbon nanotubes offer an additional thrust towards extending their application areas. By chemical functionalization, organic functional groups are generated/attached to the surfaces as well as the tip of CNTs which opens up the possibilities for tailoring the properties of nanotubes and extending their application areas. Different research efforts have been devoted towards both covalent and non-covalent functionalization for different applications. Functionalized CNTs have been used successfully for the development of high quality nanocomposites, finding wide application as chemical and biological sensors, in optoelectronics and catalysis. Non covalently functionalized carbon nanotubes have been used as a substrate for the immobilization of a large variety of biomolecules to impart specific recognition properties for the development of miniaturized biosensors as well as designing of novel bioactive nanomaterials. Functionalized CNTs have also been demonstrated as one of the promising nanomaterials for the decontamination of water due to their high adsorption capacity and specificity for various contaminants. Specifically modified CNTs have been utilized for bone tissue engineering and as a novel and versatile drug delivery vehicle. This review article discusses in short the synthesis, properties and applications of CNTs. This includes the need for functionalization of CNTs, methods and types of functionalization, and properties of functionalized CNTs and their applications especially with respect to material and biomedical sciences, water purification, and drug delivery systems.

Effects of nFe3O4 capping on phosphorus release from sediments in a eutrophic lake

This study applied the techniques of high-resolution dialysis (HR-Peeper) and diffusive gradients in thin films (DGT) to explore the effects and the behind mechanism for inhibition phosphorus (P) releasing from sediments by nFe₃O₄ capping. The highest decreasing rates of SRP and labile P (i.e., 49% and 47%, respectively) and the decreased flux of SRP showed that nFe₃O₄ capping can successfully control sediment internal P release. Adsorption by Fe(III) hydroxides with the oxidation of Fe(II) was one of the reasons for the decrease of P concentrations in nFe₃O₄ capping sediments. This was supported by the increase of Eh and significant negative correlation between Eh with Fe(II) (soluble and labile Fe(II)) and P (SRP and labile P) and significant positive correlation between Fe(II) and P in sediments by nFe₃O₄ capping. An outer-sphere complex between positively charged nFe₃O₄ surface groups and P formation was the other reason to decrease the concentrations of P in the nFe₃O₄ capping sediments. This was supported by the decrease of pH value in sediments by the capping of nFe₃O₄. This study shows that nFe₃O₄, when used as capping agent, can effectively control the sediment internal P release, which is expected to be used as a potential material for repairing lake eutrophication.

Mechanisms that control the adsorption-desorption behavior of phosphate on magnetite nanoparticles: the role of particle size and surface chemistry characteristics

Eutrophication caused by excessive phosphate discharge into surface water has raised wide concern, and the efficient removal of phosphates from wastewater using sorption methods is very important. In our study, magnetite particles with two different sizes and different surface characteristics were chosen as the sorbents to examine their adsorption and desorption behavior toward phosphate. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and N2 adsorption-desorption methods were used to characterize the morphological and surface chemical properties of the two differently sized magnetite particles. Adsorption kinetics and isotherm models (including the pseudo-first-order, Freundlich, Langmuir and Temkin models) were used to fit the experimental data, and to help with the mechanistic discussions. It was found that the nanometer-sized magnetite (nFe3O4) has a much higher surface area, larger pore volume, higher amounts of surface functional groups, and a lower point of zero charge (pHPZC) value than the micrometer-sized magnetite (Fe3O4). The adsorption kinetics show that reaching adsorption equilibrium in the case of nFe3O4 is much slower, and the particle size or surface characteristics of the magnetite may become the main factor determining the adsorption rate of the phosphate to magnetite in the rapid or slow adsorption step, respectively. nFe3O4 shows much stronger adsorption of phosphate compared to Fe3O4, which may be attributed to the larger surface area of the magnetite with a smaller particle size. In addition, the amount of functional groups and the surface electrical properties may also affect the adsorption of phosphate to magnetite by influencing the formation of the outer-sphere and/or inner-sphere complexes. The adsorption/desorption of phosphate to/from the magnetite decreases/increases with increasing pH, and the extent of change is more marked for nFe3O4. Increasing the ionic strength of the solution increases the adsorption of phosphate to the two differently sized magnetite particles, whereas the presence of humic acid only increases the adsorption of phosphate to Fe3O4. These trends may be caused by the different extents of change of the surface properties or the dispersion state of the two differently sized magnetite particles under different solution chemistry conditions. The results imply that when the synthesis of magnetite-based materials for phosphate sorption is performed, both the particle size and surface properties should be considered in order to realize the efficient and economical removal of phosphate from wastewater.

Electric-Field-Induced Connectivity Switching in Single-Molecule Junctions

The manipulation of molecule-electrode interaction is essential for the fabrication of molecular devices and determines the connectivity from electrodes to molecular components. Although the connectivity of molecular devices could be controlled by molecular design to place anchor groups in different positions of molecule backbones, the reversible switching of such connectivities remains challenging. Here, we develop an electric-field-induced strategy to switch the connectivity of single-molecule junctions reversibly, leading to the manipulation of different connectivities in the same molecular backbone. Our results offer a new concept of single-molecule manipulation and provide a feasible strategy to regulate molecule-electrode interaction.

•

A strategy to in-situ switch the connectivity of single-molecule junctions

•

A concept to manipulate the molecule-electrode interaction

•

A molecular switch triggered by the varying of electric field

•

Experiments were combined with calculations to probe the switching mechanism

Recent advances in carbon nanotube based electrochemical biosensors

There is an increasing need for rapid, low cost, reusable, reliable and sensitive detection systems for diagnosing infectious diseases, metabolic disorders, rapidly advancing cancers and detecting the presence of environmental pollutants. Most traditional methods are invasive, slow, expensive and laborious, requiring highly specialized instruments. Introduction of biosensors with nanomaterials as transducers of signals have helped in removing the disadvantages associated with traditional detectors. The properties of high mechanical strength, better electrical conductivity and ability to serve as efficient signal transducers make carbon nanotubes (CNTs) ideal material for biosensor applications among the gamut of nanomaterials. Further, CNTs with their high surface areas, easily functionalizable surfaces for receptor immobilization are gaining importance in the construction of biosensors. The expanding field of CNTs bridges the physical sciences with biology, as chemical methods are employed to develop novel tools and platforms for understanding biological systems, in disease diagnosis and treatment. This review presents recent advances in surface functionalization of CNTs necessary for immobilization of enzymes and antibodies for biosensor applications and the methodologies used for the detection of a number of chemical and biological species. The review ends with a speculation on future prospects for CNTs in biology and medicine.

Immobilization and molecular rearrangement of ionic liquids on the surface of carbon nanotubes

Two kinds of imidazolium ionic liquids with different weight ratios were absorbed on the outer surface of MWCNTs. The orientational order and properties of ILs immobilized on the MWCNTs' surfaces were analyzed.

Thiol-based molecular overlayers adsorbed on C60: role of the end-group and charge state on the stability of the complexes

We present pseudo-potential density functional theory calculations dedicated to analyze the stability and electronic properties of thiol-based molecular overlayers adsorbed on C60. We consider short molecules having a S atom as a headgroup, alkyl chains containing one to three C atoms, and a CH3 species as a terminal group. The thiol molecules are bonded to the carbon surface (through the S atom) with adsorption energies that vary in the range of ~1-2 eV and with S-C bond lengths of ~1.8 Å. For neutral C60(SCH3)n complexes, low energy atomic configurations are obtained when the thiol groups are distributed on the surface forming small molecular domains (e.g., pairs, trimers, or tetramer configurations of neighboring thiol molecules). In contrast, less stable random distributions are defined by orientationally disordered overlayers with highly distorted underlying carbon networks. The inclusion of London dispersion interaction slightly affects the structure of the molecular coating but increases the adsorption energies by values as large as 0.3 eV. Interestingly, the relative stability of the previous adsorbed phases differ from the one obtained when considering single sulfur adsorption on C60, a result that reveals the crucial role played by the terminal CH3 groups on the structure of the molecular coating. The positive (negative) charging of the [C60(SCH3)n](±q) complexes, with q as large as 8e, changes the geometrical structure and the chemical nature of the ligand shell inducing lateral molecular displacements, S-S bonding between neighboring thiols, as well as the partial degradation of the molecular coating. Finally, we consider the stability of two-component mixed overlayers formed by the coadsorption of CH3-, OH-, and NH2-terminated alkanethiols of the same length. In agreement with the results found on Au surfaces, we obtain lowest energy atomic configurations when molecular domains of a single component are stabilized on C60, a result that could be of fundamental importance in biomedical applications.

Optically- and thermally-responsive programmable materials based on carbon nanotube-hydrogel polymer composites

A simple approach is described to fabricate reversible, thermally- and optically responsive actuators utilizing composites of poly(N-isopropylacrylamide) (pNIPAM) loaded with single-walled carbon nanotubes. With nanotube loading at concentrations of 0.75 mg/mL, we demonstrate up to 5 times enhancement to the thermal response time of the nanotube-pNIPAM hydrogel actuators caused by the enhanced mass transport of water molecules. Additionally, we demonstrate the ability to obtain ultrafast near-infrared optical response in nanotube-pNIPAM hydrogels under laser excitation enabled by the strong absorption properties of nanotubes. The work opens the framework to design complex and programmable self-folding materials, such as cubes and flowers, with advanced built-in features, including tunable response time as determined by the nanotube loading.

Langmuir-Blodgett films of pyridyldithio-modified multiwalled carbon nanotubes as a support to immobilize hydrogenase

Pyridylthio-modified multiwalled carbon nanotubes (pythio-MWNTs) have been prepared by a reaction of the oxidized MWNTs with S-(2-aminoethylthio)-2-thiopyridine hydrochloride. The obtained pythio-MWNTs nanocomposites formed stable floating monolayers at the air-water interface, which were transferred onto substrate surfaces by the Langmuir-Blodgett (LB) method. Compositions and morphologies of the LB films were characterized by absorption, Raman, X-ray photoelectron spectra as well as by scan electron microscopy and atomic force microscopy. These pythio-MWNTs LB films were then used as a support to immobilize hydrogenase (H(2)ase) to form bionanocomposite of pythio-MWNTs-H(2)ase. Cyclic voltammograms for indium tin oxide electrode covered with the pythio-MWNTs-H(2)ase films were investigated in both Ar and H(2) saturated 0.05 M KCl electrolyte solutions at pH from 4.0 to 9.0. A reversible redox couple of [4Fe-4S](2+/1+) clusters of H(2)ase was recorded when the pH value was 6.0 and 9.0, with reduction and oxidation potentials appearing at about -0.70 and -0.35 V vs Ag/AgCl, respectively. It was revealed that the H(2)ase was of high catalytic activity and strong stability in the LB films of pythio-MWNTs-H(2)ase. Hence, we suggested that the present bionanocomposites could be used as heterogeneous biocatalyst to catalyze reversible reaction between protons and H(2), resulting in potential applications in biohydrogen evolution and H(2) biofuel cells.

Synthesis and characterization of functionalized ionic liquid-stabilized metal (gold and platinum) nanoparticles and metal nanoparticle/carbon nanotube hybrids

Carboxylic acid- and amino-functionalized ionic liquids were used as the stabilizer for the systhesis of metal nanoparticles in aqueous solution. Smaller gold nanoparticles (3.5 nm) and platinum nanoparticles (2.5 nm) were prepared with NaBH4 as the reductant. Larger gold nanospheres (23, 42, and 98 nm) were synthesized using different quantities of trisodiumcitrate reductant. The morphology and the surface state of the metal nanoparticles were characterized by high-resolution transmission electron microscopy, UV-visible spectroscopy, and X-ray photoelectron spectroscopy. X-ray photoelectron spectroscopy spectra indicated that binding energies of C 1s and N 1s from ionic liquids on the surface of metal nanoparticles shifted negatively compared with that from pure ionic liquids. The mechanism of stabilization is proposed to be due to the interactions between imidazolium ions/functional groups in ionic liquids and metal atoms. Resonance Rayleigh scattering property of the functionalized ionic liquid-stabilized metal nanoparticles was also explored. It was found that amino-functionalized ionic liquid-stabilized gold nanoparticles exhibited lower resonance Rayleigh scattering intensity than trisodiumcitrate stabilized gold nanoparticles, which is expected to decrease the background of the resonance Rayleigh scattering intensity in the determination of various analytes. Moreover, it was found that all the as-prepared metal nanoparticles could be easily assembled on the multiwalled carbon nanotubes, which was confirmed by high-resolution transmission electron microscopy and energy dispersive X-ray spectroscopy. In this case, ionic liquids acted as a linker to connect metal nanoparticles with carbon nanotubes. The imidazolium ring moiety of ionic liquids might interact with the pi-electronic nanotube surface by virtue of cation-pi and/or pi-pi interactions, and the functionalized group moiety of ionic liquids might interact with the metal NPs surface. Finally, it was observed that plantinum nanoparticle/multiwalled carbon nanotube hybrids could be well dispersed in water, which may find future applications in fields such as catalysis, nanoscale electronics, as well as sensors.

Noncovalent Interaction between Gold Nanoparticles and Multiwalled Carbon Nanotubes via an Intermediatory

A new and effective method has been developed where self-assembled gold nanoparticles (Au-NPs) of ∼10 nm diameter are successfully attached onto the surface of sidewalls and ends of thiol-terminated multi-walled carbon nanotubes (MWNTs) functionalized with orthomercaptoaniline, acting as a bridging agent. It can bridge the carbon nanotubes (CNTs) and Au-NPs via the bi-functional moiety with benzene unit at one end and thiol group at the other end by self-assembly. Theortho-mercaptoaniline was first grafted onto the surface of the CNTs viaπ-πinteraction between the benzene ring of the mercaptoaniline andπ-conjugated body of MWNTs surface to produce thiol-terminated CNTs. The bare surface of Au-NPs facilitates to attach on the thiol group of the thiol-terminated CNTs. Attenuated total reflectance FTIR, UV-visible, Raman spectroscopy and X-ray powder diffraction studies were used to verify whether the mercapto-benzene moieties have been attached to theπ-conjugated body of functionalized MWNTs. The direct evidence is obtained from transmission electron microscope (TEM) images where self-assembled Au-NPs are attached onto the functionalized MWNTs.

Comparison of the quality of aqueous dispersions of single wall carbon nanotubes using surfactants and biomolecules

The use of single wall carbon nanotubes (SWCNTs) in current and future applications depends on the ability to process SWCNTs in a solvent to yield high-quality dispersions characterized by individual SWCNTs and possessing a minimum of SWCNT bundles. Many approaches for the dispersion of SWCNTs have been reported. However, there is no general assessment which compares the relative quality and dispersion efficiency of the respective methods. Herein we report a quantitative comparison of the relative ability of "wrapping polymers" including oligonucleotides, peptides, lignin, chitosan, and cellulose and surfactants such as cholates, ionic liquids, and organosulfates to disperse SWCNTs in water. Optical absorption and fluorescence spectroscopy provide quantitative characterization (amount of SWCNTs that can be suspended by a given surfactant and its ability to debundle SWCNTs) of these suspensions. Sodium deoxy cholate (SDOCO), oligonucleotides (GT)(15), (GT)(10), (AC)(15), (AC)(10), C(10-30), and carboxymethylcellulose (CBMC-250K) exhibited the highest quality suspensions of the various systems studied in this work. The information presented here provides a good framework for further study of SWCNT purification and applications.

Self-assembled carbon nanotubes on gold: polarization-modulated infrared reflection-absorption spectroscopy, high-resolution X-ray photoemission spectroscopy, and near-edge X-ray absorption fine structure spectroscopy study

Recently we reported noncovalent functionalization of nanotubes in an aqueous medium with ionic liquid-based surfactants, 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), resulting in positively charged single-wall carbon nanotube (SWNT)-1,2 composites. Thiolation of SWNTs with 2 provides their self-assembly on gold as well as templating gold nanoparticles on SWNT sidewalls via a covalent -S-Au bond. In this investigation, we studied the electronic structure, intermolecular interactions, and packing within noncovalently thiolated SWNTs and also nanotube alignment in the bulk of SWNT-2 dried droplets and self-assembled submonolayers (SAMs) on gold by high-resolution X-ray photoemission spectroscopy (HRXPS), C K-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). HRXPS data confirmed the noncovalent nature of interactions within the nanocomposite of thiolated nanotubes. In PM-IRRAS spectra of SWNT SAMs on gold, the IR-active vibrational SWNT modes have been observed and identified. According to PM-IRRAS data, the hydrocarbon chains of 2 are oriented with less tilt angle to the bare gold normal in a SAM deposited from an SWNT-2 dispersion than those of 1 deposited from an SWNT-1 dispersion on the mercaptoethanesulfonic acid-primed gold. For both the dried SWNT-2 bulk and the SWNT-2 SAM on gold, the C K-edge NEXAFS spectra revealed the presence of CH-pi interactions between hydrocarbon chains of 2 and the pi electronic nanotube structure due to the highly resolved vibronic fine structure of carbon 1s --> R*/sigma*C-H series of states in the alkyl chain of 2. For the SWNT-2 bulk, the observed splitting and upshift of the SWNT pi* orbitals in the NEXAFS spectrum indicated the presence of pi-pi interactions. In the NEXAFS spectrum of the SWNT-2 SAM on gold, the upshifted values of the photon energy for R*/sigma*C-H transitions indicated close contact of 2 with nanotubes and with a gold surface. The angle-dependent NEXAFS for the SWNT-2 bulk showed that most of the molecules of 2 are aligned along the nanotubes, which are self-organized with orientation parallel to the substrate plane, whereas the NEXAFS for the SWNT-2 SAM revealed a more normal orientation of functionality 2 on gold compared with that in the SWNT-2 bulk.

Temperature-responsive self-assembled monolayers of oligo(ethylene glycol): control of biomolecular recognition

Self-assembled monolayers (SAMs) of oligo(ethylene glycol) (OEG)-tethered molecules on gold are important for various biorelevant applications ranging from biomaterials to bioanalytical devices, where surface resistance to nonspecific protein adsorption is needed. Incorporation of a stimuli-responsive character to the OEG SAMs enables the creation of nonfouling surfaces with switchable functionality. Here we present an OEG-derived structure that is highly responsive to temperature changes in the vicinity of the physiological temperature, 37 degrees C. The temperature-responsive solution behavior of this new compound was demonstrated by UV-vis and nuclear magnetic resonance spectroscopy. Its chemisorption onto gold(111), and the retention of responsive behavior after chemisorption have been demonstrated by surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), and atomic force and scanning tunneling microscopy. The OEG-derived SAMs have been shown to reversibly switch the wettability of the surface, as determined by contact angle measurements. More importantly, SPR and AFM studies showed that the OEG SAMs can be utilized to control the affinity binding of streptavidin to the biotin-tethered surface in a temperature-dependent manner while still offering the nonspecific protein-resistance to the surface.