1
|
Cho Y, Kim J, Park J, Doh J. Surface nanotopography and cell shape modulate tumor cell susceptibility to NK cell cytotoxicity. MATERIALS HORIZONS 2023; 10:4532-4540. [PMID: 37559559 DOI: 10.1039/d3mh00367a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/11/2023]
Abstract
Natural killer (NK) cells are innate cytotoxic lymphocytes exerting cytotoxicity against virally infected cells and tumor cells. NK cell cytotoxicity is primarily determined by biochemical signals received from ligands expressed on target cell surfaces, but it is also possible that biophysical environments of tumor cells, such as nanoscale surface topography typically existing on extracellular matrixes (ECMs) or cell morphology determined by ECM spaces or cell density, regulate NK cell cytotoxicity. In this study, micro/nanofabrication technology was applied to examine this possibility. Tumor cells were plated on flat or nanogrooved surfaces, or micropatterned into circular or elliptical geometries, and the effects of surface topography and tumor cell morphology on NK cell cytotoxicity were investigated. NK cells exhibited significantly higher cytotoxicity against tumor cells on nanogrooved surfaces or tumor cells in elliptical patterns than tumor cells on flat surfaces or tumor cells in circular patterns, respectively. The amounts of stress fiber formation in tumor cells positively correlated with NK cell cytotoxicity, indicating that increased cellular tension of tumor cells, either mediated by nanogrooved surfaces or elongated morphologies, was a key factor regulating NK cell cytotoxicity. These results may provide insight into the design of NK cell-based cancer immunotherapy.
Collapse
Affiliation(s)
- Yongbum Cho
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology, 77, Cheongam-ro, Pohang, Gyeongbuk, 37673, Republic of Korea
| | - JangHyuk Kim
- Department of Materials Science and Engineering, Seoul National University, Seoul, South Korea.
| | - Jeehun Park
- SOFT Foundry Institute, Seoul National University, Seoul, South Korea.
| | - Junsang Doh
- Department of Materials Science and Engineering, Seoul National University, Seoul, South Korea.
- SOFT Foundry Institute, Seoul National University, Seoul, South Korea.
- Institute of Engineering Research, BioMAX, Seoul National University, Seoul, South Korea
| |
Collapse
|
2
|
Javorskis T, Rakickas T, Janku̅naitė A, Vaitekonis Š, Ulčinas A, Orentas E. Maskless, Reusable Visible-Light Direct-Write Stamp for Microscale Surface Patterning. ACS APPLIED MATERIALS & INTERFACES 2023; 15:11259-11267. [PMID: 36797999 PMCID: PMC11008783 DOI: 10.1021/acsami.2c20568] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Accepted: 02/06/2023] [Indexed: 06/18/2023]
Abstract
We report a straightforward method for creating large-area, microscale resolution patterns of functional amines on self-assembled monolayers by the photoinduced local acidification of a flat elastomeric stamp enriched with photoacid. The limited diffusivity of the photoactivated merocyanine acid in poly(dimethylsiloxane) (PDMS) enabled to confine efficient deprotection of N-tert-butyloxycarbonyl amino group (N-Boc) to line widths below 10 μm. The experimental setup is very simple and is built around the conventional HD-DVD optical pickup. The method allows cost-efficient, maskless, large-area chemical patterning while avoiding potentially cytotoxic photochemical reaction products. The activation of the embedded photoacid occurs within the stamp upon illumination with the laser beam and the process is fully reversible. Preliminary positive results highlight the possibility of repeatable use of the same stamp for the creation of different patterns.
Collapse
Affiliation(s)
- Tomas Javorskis
- Department
of Nanoengineering, Center for Physical
Sciences and Technology, Savanorių 231, LT-02300 Vilnius, Lithuania
| | - Tomas Rakickas
- Department
of Nanoengineering, Center for Physical
Sciences and Technology, Savanorių 231, LT-02300 Vilnius, Lithuania
| | - Alberta Janku̅naitė
- Department
of Organic Chemistry, Vilnius University, Naugarduko 24, LT-03225 Vilnius, Lithuania
| | - Šaru̅nas Vaitekonis
- Department
of Nanoengineering, Center for Physical
Sciences and Technology, Savanorių 231, LT-02300 Vilnius, Lithuania
| | - Artu̅ras Ulčinas
- Department
of Nanoengineering, Center for Physical
Sciences and Technology, Savanorių 231, LT-02300 Vilnius, Lithuania
| | - Edvinas Orentas
- Department
of Nanoengineering, Center for Physical
Sciences and Technology, Savanorių 231, LT-02300 Vilnius, Lithuania
- Department
of Organic Chemistry, Vilnius University, Naugarduko 24, LT-03225 Vilnius, Lithuania
| |
Collapse
|
3
|
Modeling ATP-mediated endothelial cell elongation on line patterns. Biomech Model Mechanobiol 2022; 21:1531-1548. [PMID: 35902488 PMCID: PMC9626447 DOI: 10.1007/s10237-022-01604-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2022] [Accepted: 06/24/2022] [Indexed: 11/08/2022]
Abstract
Endothelial cell (EC) migration is crucial for a wide range of processes including vascular wound healing, tumor angiogenesis, and the development of viable endovascular implants. We have previously demonstrated that ECs cultured on 15-μm wide adhesive line patterns exhibit three distinct migration phenotypes: (a) “running” cells that are polarized and migrate continuously and persistently on the adhesive lines with possible spontaneous directional changes, (b) “undecided” cells that are highly elongated and exhibit periodic changes in the direction of their polarization while maintaining minimal net migration, and (c) “tumbling-like” cells that migrate persistently for a certain amount of time but then stop and round up for a few hours before spreading again and resuming migration. Importantly, the three migration patterns are associated with distinct profiles of cell length. Because of the impact of adenosine triphosphate (ATP) on cytoskeletal organization and cell polarization, we hypothesize that the observed differences in EC length among the three different migration phenotypes are driven by differences in intracellular ATP levels. In the present work, we develop a mathematical model that incorporates the interactions between cell length, cytoskeletal (F-actin) organization, and intracellular ATP concentration. An optimization procedure is used to obtain the model parameter values that best fit the experimental data on EC lengths. The results indicate that a minimalist model based on differences in intracellular ATP levels is capable of capturing the different cell length profiles observed experimentally.
Collapse
|
4
|
Kourti D, Kanioura A, Chatzichristidi M, Beltsios KG, Kakabakos SE, Petrou PS. Photopatternable materials for guided cell adhesion and growth. Eur Polym J 2022. [DOI: 10.1016/j.eurpolymj.2021.110896] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
5
|
Fruncillo S, Su X, Liu H, Wong LS. Lithographic Processes for the Scalable Fabrication of Micro- and Nanostructures for Biochips and Biosensors. ACS Sens 2021; 6:2002-2024. [PMID: 33829765 PMCID: PMC8240091 DOI: 10.1021/acssensors.0c02704] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Since the early 2000s, extensive research has been performed to address numerous challenges in biochip and biosensor fabrication in order to use them for various biomedical applications. These biochips and biosensor devices either integrate biological elements (e.g., DNA, proteins or cells) in the fabrication processes or experience post fabrication of biofunctionalization for different downstream applications, including sensing, diagnostics, drug screening, and therapy. Scalable lithographic techniques that are well established in the semiconductor industry are now being harnessed for large-scale production of such devices, with additional development to meet the demand of precise deposition of various biological elements on device substrates with retained biological activities and precisely specified topography. In this review, the lithographic methods that are capable of large-scale and mass fabrication of biochips and biosensors will be discussed. In particular, those allowing patterning of large areas from 10 cm2 to m2, maintaining cost effectiveness, high throughput (>100 cm2 h-1), high resolution (from micrometer down to nanometer scale), accuracy, and reproducibility. This review will compare various fabrication technologies and comment on their resolution limit and throughput, and how they can be related to the device performance, including sensitivity, detection limit, reproducibility, and robustness.
Collapse
Affiliation(s)
- Silvia Fruncillo
- Manchester Institute of Biotechnology, University of Manchester, 131 Princess Street, Manchester, M1 7DN, United Kingdom
- Department of Chemistry, University of Manchester, Oxford Road, Manchester M13 9PL, United Kingdom
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, #08-03, Innovis, Singapore 138634, Singapore
| | - Xiaodi Su
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, #08-03, Innovis, Singapore 138634, Singapore
- Department of Chemistry, National University of Singapore, Block S8, Level 3, 3 Science Drive, Singapore 117543, Singapore
| | - Hong Liu
- Institute of Materials Research and Engineering, Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, #08-03, Innovis, Singapore 138634, Singapore
| | - Lu Shin Wong
- Manchester Institute of Biotechnology, University of Manchester, 131 Princess Street, Manchester, M1 7DN, United Kingdom
- Department of Chemistry, University of Manchester, Oxford Road, Manchester M13 9PL, United Kingdom
| |
Collapse
|
6
|
Park J, Kim SE, Cho Y, An S, Moon D, Park I, Doh J. Fabrication of 2D and 3D Cell Cluster Arrays Using a Cell-Friendly Photoresist. ACS Biomater Sci Eng 2021; 7:3082-3087. [PMID: 34125522 DOI: 10.1021/acsbiomaterials.1c00655] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Cells in 3D behave differently than cells in 2D. We develop a new method for the fabrication of 2D and 3D cell cluster arrays on an identical substrate using a cell-friendly photoresist, which enables comparative study between cells in 2D and 3D cell clusters. The fabricated cell cluster arrays maintain their structure up to 3 days with good viability. Using this method, 2D and 3D cancer cell clusters with comparable sizes are fabricated, and natural killer (NK) cell cytotoxicity assays are performed to assess how dimensionality of cancer cell clusters influence their susceptibility to immune cell-mediated killing.
Collapse
Affiliation(s)
- Jeehun Park
- Research Institute of Advanced Materials (RIAM), Seoul National University, 1, Gwanak-ro, Seoul 08826, South Korea
| | - Seong-Eun Kim
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Pohang, Gyeongbuk 37673, South Korea
| | - Yongbum Cho
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Pohang, Gyeongbuk 37673, South Korea
| | - Seongmin An
- Research Institute of Advanced Materials (RIAM), Seoul National University, 1, Gwanak-ro, Seoul 08826, South Korea
| | - Dowon Moon
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77, Cheongam-ro, Pohang, Gyeongbuk 37673, South Korea
| | - Inae Park
- Research Institute of Advanced Materials (RIAM), Seoul National University, 1, Gwanak-ro, Seoul 08826, South Korea
| | - Junsang Doh
- Research Institute of Advanced Materials (RIAM), Seoul National University, 1, Gwanak-ro, Seoul 08826, South Korea.,Department of Materials Science and Engineering, Institute of Engineering Research, BioMAX, Seoul National University, 1, Gwanak-ro, Seoul 08826, South Korea
| |
Collapse
|
7
|
Antibody Printing Technologies. Methods Mol Biol 2020. [PMID: 33237416 DOI: 10.1007/978-1-0716-1064-0_13] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2023]
Abstract
Antibody microarrays are routinely employed in the lab and in the clinic for studying protein expression, protein-protein, and protein-drug interactions. The microarray format reduces the size scale at which biological and biochemical interactions occur, leading to large reductions in reagent consumption and handling times while increasing overall experimental throughput. Specifically, antibody microarrays, as a platform, offer a number of different advantages over traditional techniques in the areas of drug discovery and diagnostics. While a number of different techniques and approaches have been developed for creating micro and nanoscale antibody arrays, issues relating to sensitivity, cost, and reproducibility persist. The aim of this review is to highlight current state-of the-art techniques and approaches for creating antibody arrays by providing latest accounts of the field while discussing potential future directions.
Collapse
|
8
|
Saffioti NA, Cavalcanti-Adam EA, Pallarola D. Biosensors for Studies on Adhesion-Mediated Cellular Responses to Their Microenvironment. Front Bioeng Biotechnol 2020; 8:597950. [PMID: 33262979 PMCID: PMC7685988 DOI: 10.3389/fbioe.2020.597950] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2020] [Accepted: 10/12/2020] [Indexed: 12/28/2022] Open
Abstract
Cells interact with their microenvironment by constantly sensing mechanical and chemical cues converting them into biochemical signals. These processes allow cells to respond and adapt to changes in their environment, and are crucial for most cellular functions. Understanding the mechanism underlying this complex interplay at the cell-matrix interface is of fundamental value to decipher key biochemical and mechanical factors regulating cell fate. The combination of material science and surface chemistry aided in the creation of controllable environments to study cell mechanosensing and mechanotransduction. Biologically inspired materials tailored with specific bioactive molecules, desired physical properties and tunable topography have emerged as suitable tools to study cell behavior. Among these materials, synthetic cell interfaces with built-in sensing capabilities are highly advantageous to measure biophysical and biochemical interaction between cells and their environment. In this review, we discuss the design of micro and nanostructured biomaterials engineered not only to mimic the structure, properties, and function of the cellular microenvironment, but also to obtain quantitative information on how cells sense and probe specific adhesive cues from the extracellular domain. This type of responsive biointerfaces provides a readout of mechanics, biochemistry, and electrical activity in real time allowing observation of cellular processes with molecular specificity. Specifically designed sensors based on advanced optical and electrochemical readout are discussed. We further provide an insight into the emerging role of multifunctional micro and nanosensors to control and monitor cell functions by means of material design.
Collapse
Affiliation(s)
- Nicolás Andrés Saffioti
- Instituto de Nanosistemas, Universidad Nacional de General San Martín, San Martín, Argentina
| | | | - Diego Pallarola
- Instituto de Nanosistemas, Universidad Nacional de General San Martín, San Martín, Argentina
| |
Collapse
|
9
|
Romano A, Roppolo I, Rossegger E, Schlögl S, Sangermano M. Recent Trends in Applying Rrtho-Nitrobenzyl Esters for the Design of Photo-Responsive Polymer Networks. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E2777. [PMID: 32575481 PMCID: PMC7344511 DOI: 10.3390/ma13122777] [Citation(s) in RCA: 26] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/27/2020] [Revised: 06/11/2020] [Accepted: 06/16/2020] [Indexed: 01/08/2023]
Abstract
Polymers with light-responsive groups have gained increased attention in the design of functional materials, as they allow changes in polymers properties, on demand, and simply by light exposure. For the synthesis of polymers and polymer networks with photolabile properties, the introduction o-nitrobenzyl alcohol (o-NB) derivatives as light-responsive chromophores has become a convenient and powerful route. Although o-NB groups were successfully exploited in numerous applications, this review pays particular attention to the studies in which they were included as photo-responsive moieties in thin polymer films and functional polymer coatings. The review is divided into four different sections according to the chemical structure of the polymer networks: (i) acrylate and methacrylate; (ii) thiol-click; (iii) epoxy; and (iv) polydimethylsiloxane. We conclude with an outlook of the present challenges and future perspectives of the versatile and unique features of o-NB chemistry.
Collapse
Affiliation(s)
- Angelo Romano
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (A.R.); (I.R.)
| | - Ignazio Roppolo
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (A.R.); (I.R.)
| | - Elisabeth Rossegger
- Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, Leoben 8700, Austria; (E.R.); (S.S.)
| | - Sandra Schlögl
- Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, Leoben 8700, Austria; (E.R.); (S.S.)
| | - Marco Sangermano
- Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy; (A.R.); (I.R.)
| |
Collapse
|
10
|
Vermeulen S, de Boer J. Screening as a strategy to drive regenerative medicine research. Methods 2020; 190:80-95. [PMID: 32278807 DOI: 10.1016/j.ymeth.2020.04.004] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/03/2019] [Revised: 03/30/2020] [Accepted: 04/06/2020] [Indexed: 02/07/2023] Open
Abstract
In the field of regenerative medicine, optimization of the parameters leading to a desirable outcome remains a huge challenge. Examples include protocols for the guided differentiation of pluripotent cells towards specialized and functional cell types, phenotypic maintenance of primary cells in cell culture, or engineering of materials for improved tissue interaction with medical implants. This challenge originates from the enormous design space for biomaterials, chemical and biochemical compounds, and incomplete knowledge of the guiding biological principles. To tackle this challenge, high-throughput platforms allow screening of multiple perturbations in one experimental setup. In this review, we provide an overview of screening platforms that are used in regenerative medicine. We discuss their fabrication techniques, and in silico tools to analyze the extensive data sets typically generated by these platforms.
Collapse
Affiliation(s)
- Steven Vermeulen
- Laboratory for Cell Biology-Inspired Tissue Engineering, MERLN Institute, University of Maastricht, Maastricht, the Netherlands; BioInterface Science Group, Department of Biomedical Engineering and Institute for Complex Molecular Systems, University of Eindhoven, Eindhoven, the Netherlands
| | - Jan de Boer
- BioInterface Science Group, Department of Biomedical Engineering and Institute for Complex Molecular Systems, University of Eindhoven, Eindhoven, the Netherlands.
| |
Collapse
|
11
|
Giebler M, Radl S, Ules T, Griesser T, Schlögl S. Photopatternable Epoxy-Based Thermosets. MATERIALS (BASEL, SWITZERLAND) 2019; 12:E2350. [PMID: 31344852 PMCID: PMC6695657 DOI: 10.3390/ma12152350] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/05/2019] [Revised: 07/17/2019] [Accepted: 07/22/2019] [Indexed: 01/09/2023]
Abstract
The present work provides a comparative study on the photopatterning of epoxy-based thermosets as a function of network structure and network mobility. Local switching of solubility properties by light of a defined wavelength is achieved by exploiting versatile o-nitrobenzyl ester (o-NBE) chemistry. o-NBE derivatives with terminal epoxy groups are synthetized and thermally cured with different types of cycloaliphatic anhydrides via nucleophilic ring opening reaction. By varying the structure of the anhydride, glass transition temperature (Tg) and surface hardness are adjusted over a broad range. Once the network has been formed, the photolysis of the o-NBE groups enables a well-defined degradation of the 3D network. Fourier transform infrared (FT-IR) spectroscopy studies demonstrate that cleavage rate and cleavage yield increase with rising mobility of the network, which is either facilitated by inherent network properties (Tg below room temperature) or a simultaneous heating of the thermosets above their Tg. The formation of soluble species is evidenced by sol-gel analysis, revealing that low-Tg networks are prone to secondary photoreactions at higher exposure doses, which lead to a re-crosslinking of the cleaved polymer chains. The change in solubility properties is exploited to inscribe positive tone micropatterns within the thermosets by photolithographic techniques. Contrast curves show that the resist performance of rigid networks is superior to flexible ones, with a contrast of 1.17 and a resolution of 8 µm.
Collapse
Affiliation(s)
- Michael Giebler
- Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, A-8700 Leoben, Austria
| | - Simone Radl
- Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, A-8700 Leoben, Austria
| | - Thomas Ules
- Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, A-8700 Leoben, Austria
| | - Thomas Griesser
- Institute of Chemistry of Polymeric Materials, Montanuniversitaet Leoben, Otto Glöckel-Strasse 2, A-8700 Leoben, Austria
| | - Sandra Schlögl
- Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, A-8700 Leoben, Austria.
| |
Collapse
|
12
|
Park J, Kim T, Choi JC, Doh J. In Situ Subcellular Detachment of Cells Using a Cell-Friendly Photoresist and Spatially Modulated Light. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2019; 6:1900566. [PMID: 31380216 PMCID: PMC6661940 DOI: 10.1002/advs.201900566] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/12/2019] [Revised: 04/22/2019] [Indexed: 06/10/2023]
Abstract
Dynamic adhesion and detachment of subcellular regions occur during cell migration, thus a technique allowing precise control of subcellular detachment of cells will be useful for cell migration study. Previous methods for cell detachment were developed either for harvesting cells or cell sheets attached on surfaces with low resolution patterning capability, or for detaching subcellular regions located on predefined electrodes. In this paper, a method that allows in situ subcellular detachment of cells with ≈1.5 µm critical feature size while observing cells under a fluorescence microscope is introduced using a cell-friendly photoresist and spatially modulated light. Using this method, a single cell, regions in cell sheets, and a single focal adhesion complex within a cell are successfully detached. Furthermore, different subcellular regions of migrating cells are detached and changes in cell polarity and migration direction are quantitatively analyzed. This method will be useful for many applications in cell detachment, in particular when subcellular resolution is required.
Collapse
Affiliation(s)
- Jeehun Park
- School of Interdisciplinary Bioscience and Bioengineering (I‐Bio)Pohang University of Science and Technology77, Cheongam‐roPohangGyeongbuk37673South Korea
| | - Taeyup Kim
- Department of Mechanical EngineeringPohang University of Science and Technology77, Cheongam‐roPohangGyeongbuk37673South Korea
| | - Jong Chul Choi
- Department of Mechanical EngineeringPohang University of Science and Technology77, Cheongam‐roPohangGyeongbuk37673South Korea
| | - Junsang Doh
- Department of Materials Science and EngineeringSeoul National University1 Gwanak‐roGwanak‐guSeoul08826South Korea
| |
Collapse
|
13
|
Park H, Kim H, Doh J. Multifunctional Microwell Arrays for Single Cell Level Functional Analysis of Lymphocytes. Bioconjug Chem 2017; 29:672-679. [DOI: 10.1021/acs.bioconjchem.7b00620] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
14
|
Liu C, Zhou Y, Sun M, Li Q, Dong L, Ma L, Cheng K, Weng W, Yu M, Wang H. Light-Induced Cell Alignment and Harvest for Anisotropic Cell Sheet Technology. ACS APPLIED MATERIALS & INTERFACES 2017; 9:36513-36524. [PMID: 28984126 DOI: 10.1021/acsami.7b07202] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Well-organized orientation of cells and anisotropic extracellular matrix (ECM) are crucial in engineering biomimetic tissues, such as muscles, arteries, and nervous system, and so on. This strategy, however, is only beginning to be explored. Here, we demonstrated a light-induced cell alignment and harvest for anisotropic cell sheets (ACS) technology using light-responsive TiO2 nanodots film (TNF) and photo-cross-linkable gelatin methacrylate (GelMA). Cell initial behaviors on TNF might be controlled by micropatterns of light-induced distinct surface hydroxyl features, owing to a sensing mechanism of myosin II-driven retraction of lamellipodia. Further light treatment allowed ACS detachment from TNF surface while simultaneously solidified the GelMA, realizing the automatic transference of ACS. Moreover, two detached ACS were successfully stacked into a 3D bilayer construct with controllable orientation of individual layer and maintained cell alignment for more than 7 days. Interestingly, the anisotropic HFF-1 cell sheets could further induce the HUVECs to form anisotropic capillary-like networks via upregulating VEGFA and ANGPT1 and producing anisotropic ECM. This developed integrated-functional ACS technology therefore provides a novel route to produce complex tissue constructs with well-defined orientations and may have a profound impact on regenerative medicine.
Collapse
Affiliation(s)
- Chao Liu
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Ying Zhou
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Miao Sun
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Qi Li
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Lingqing Dong
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Liang Ma
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Kui Cheng
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Wenjian Weng
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Mengfei Yu
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| | - Huiming Wang
- The Affiliated Stomatologic Hospital and ‡The First Affiliated Hospital of Medical College, Zhejiang University , Hangzhou 310003, China
- School of Materials Science and Engineering, State Key Laboratory of Silicon Materials, Cyrus Tang Center for Sensor Materials and Applications and ∥The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University , Hangzhou 310027, China
| |
Collapse
|
15
|
Verma S, Verma V. Lithographic patterning of antibodies by direct lift-off and improved surface adhesion. Biofabrication 2017; 9:015012. [PMID: 28092639 DOI: 10.1088/1758-5090/9/1/015012] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
The inherent property of antibodies binding to their antigen with high specificity makes them a strong candidate for sensing and detection applications. Microscale patterning of antibodies is desired for the miniaturization of sensors and fundamental cell biology studies. However, existing methodologies to pattern antibodies at the microscale are multi-step. In this work, we demonstrate microscale patterning of antibodies on a glass coverslip in a single step photolithography process. The microscale features of the photoresist were generated on the coverslip using photolithography, and the antibody solution was incubated. Acetone lift-off of the antibody incubated photoresist, and subsequent washing by isopropanol (IPA), produced a micro-array of antibodies. The functionality of patterned primary antibody was confirmed using the corresponding antigen and strict controls. One of the striking features of this method of patterning is that the process steps and chemicals inherently improve the adhesion between the antibodies and glass without the need to functionalize the glass surface. We performed an ultrasonication test, detergent washing test, and Scotch tape test to show improved adhesion. Using appropriate controls, we show that the interaction taking place between the antibodies and the glass surface, after our process, is stronger than the simple physisorption taking place between the antibodies and the glass surface, without any treatment.
Collapse
Affiliation(s)
- Sankalp Verma
- Materials Science and Engineering, Indian Institute of Technology Kanpur, Kanpur, India
| | | |
Collapse
|
16
|
Radl S, Roppolo I, Pölzl K, Ast M, Spreitz J, Griesser T, Kern W, Schlögl S, Sangermano M. Light triggered formation of photo-responsive epoxy based networks. POLYMER 2017. [DOI: 10.1016/j.polymer.2016.12.070] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
17
|
Seo JH, Ishihara K. Simultaneous patterning of proteins and cells through bioconjugation with photoreactable phospholipid polymers. RSC Adv 2017. [DOI: 10.1039/c7ra07389e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Photoreactable bioconjugated macromolecule composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) and 2-(4-azidobenzamido)ethyl methacrylate was synthesized to develop simultaneously patterned surface of proteins and cells.
Collapse
Affiliation(s)
- Ji-Hun Seo
- Department of Materials Engineering
- School of Engineering
- The University of Tokyo
- Tokyo 113-8656
- Japan
| | - Kazuhiko Ishihara
- Department of Materials Engineering
- School of Engineering
- The University of Tokyo
- Tokyo 113-8656
- Japan
| |
Collapse
|
18
|
Radl SV, Schipfer C, Kaiser S, Moser A, Kaynak B, Kern W, Schlögl S. Photo-responsive thiol–ene networks for the design of switchable polymer patterns. Polym Chem 2017. [DOI: 10.1039/c7py00055c] [Citation(s) in RCA: 26] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
Photo-patternable thiol–ene networks are prepared by combining versatile o-NBE chemistry with the distinctive advantages of a typical “click” reaction.
Collapse
Affiliation(s)
- S. V. Radl
- Polymer Competence Center Leoben GmbH
- A-8700 Leoben
- Austria
| | - C. Schipfer
- Polymer Competence Center Leoben GmbH
- A-8700 Leoben
- Austria
| | - S. Kaiser
- Polymer Competence Center Leoben GmbH
- A-8700 Leoben
- Austria
| | - A. Moser
- Chair of Materials Science and Testing of Plastics
- Montanuniversitaet Leoben
- A-8700 Leoben
- Austria
| | - B. Kaynak
- Polymer Competence Center Leoben GmbH
- A-8700 Leoben
- Austria
| | - W. Kern
- Polymer Competence Center Leoben GmbH
- A-8700 Leoben
- Austria
- Chair of Chemistry of Polymeric Materials
- Montanuniversitaet Leoben
| | - S. Schlögl
- Polymer Competence Center Leoben GmbH
- A-8700 Leoben
- Austria
| |
Collapse
|
19
|
Cellular Response to Surface Topography and Substrate Stiffness. STEM CELL BIOLOGY AND REGENERATIVE MEDICINE 2017. [DOI: 10.1007/978-3-319-51617-2_3] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
20
|
Quantitative comparison of cancer and normal cell adhesion using organosilane monolayer templates: an experimental study on the anti-adhesion effect of green-tea catechins. In Vitro Cell Dev Biol Anim 2016; 52:799-805. [DOI: 10.1007/s11626-016-0049-6] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2016] [Accepted: 04/22/2016] [Indexed: 10/21/2022]
|
21
|
Whang M, Kim J. Synthetic hydrogels with stiffness gradients for durotaxis study and tissue engineering scaffolds. Tissue Eng Regen Med 2016; 13:126-139. [PMID: 30603392 PMCID: PMC6170857 DOI: 10.1007/s13770-016-0026-x] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2016] [Revised: 03/02/2016] [Accepted: 03/03/2016] [Indexed: 12/21/2022] Open
Abstract
Migration of cells along the right direction is of paramount importance in a number of in vivo circumstances such as immune response, embryonic developments, morphogenesis, and healing of wounds and scars. While it has been known for a while that spatial gradients in chemical cues guide the direction of cell migration, the significance of the gradient in mechanical cues, such as stiffness of extracellular matrices (ECMs), in directed migration of cells has only recently emerged. With advances in synthetic chemistry, micro-fabrication techniques, and methods to characterize mechanical properties at a length scale even smaller than a single cell, synthetic ECMs with spatially controlled stiffness have been created with variations in design parameters. Since then, the synthetic ECMs have served as platforms to study the migratory behaviors of cells in the presence of the stiffness gradient of ECM and also as scaffolds for the regeneration of tissues. In this review, we highlight recent studies in cell migration directed by the stiffness gradient, called durotaxis, and discuss the mechanisms of durotaxis. We also summarize general methods and design principles to create synthetic ECMs with the stiffness gradients and, finally, conclude by discussing current limitations and future directions of synthetic ECMs for the study of durotaxis and the scaffold for tissue engineering.
Collapse
Affiliation(s)
- Minji Whang
- Department of Chemical and Biomolecular Engineering, Sogang University, Seoul, Korea
| | - Jungwook Kim
- Department of Chemical and Biomolecular Engineering, Sogang University, Seoul, Korea
| |
Collapse
|
22
|
Song KH, Lee J, Park H, Kim HM, Park J, Kwon KW, Doh J. Roles of endothelial A-type lamins in migration of T cells on and under endothelial layers. Sci Rep 2016; 6:23412. [PMID: 26996137 PMCID: PMC4800500 DOI: 10.1038/srep23412] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2015] [Accepted: 03/07/2016] [Indexed: 12/30/2022] Open
Abstract
Stiff nuclei in cell-dense microenvironments may serve as distinct biomechanical cues for cell migration, but such a possibility has not been tested experimentally. As a first step addressing this question, we altered nuclear stiffness of endothelial cells (ECs) by reducing the expression of A-type lamins using siRNA, and investigated the migration of T cells on and under EC layers. While most T cells crawling on control EC layers avoided crossing over EC nuclei, a significantly higher fraction of T cells on EC layers with reduced expression of A-type lamins crossed over EC nuclei. This result suggests that stiff EC nuclei underlying T cells may serve as "duro-repulsive" cues to direct T cell migration toward less stiff EC cytoplasm. During subendothelial migration under EC layers with reduced expression of A-type lamins, T cells made prolonged contact and substantially deformed EC nuclei, resulting in reduced speed and directional persistence. This result suggests that EC nuclear stiffness promotes fast and directionally persistent subendothelial migration of T cells by allowing minimum interaction between T cells and EC nuclei.
Collapse
Affiliation(s)
- Kwang Hoon Song
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | - Jaehyun Lee
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | - HyoungJun Park
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | - Hye Mi Kim
- Division of Integrative Bioscience and Biotechnology (IBB), Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | - Jeehun Park
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | - Keon Woo Kwon
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | - Junsang Doh
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology (POSTECH) San 31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| |
Collapse
|
23
|
|
24
|
Single step neutravidin patterning: a lithographic approach for patterning proteins. Biomed Microdevices 2016; 18:29. [DOI: 10.1007/s10544-016-0053-3] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
|
25
|
Kweon S, Song KH, Park H, Choi JC, Doh J. Dynamic Micropatterning of Cells on Nanostructured Surfaces Using a Cell-friendly Photoresist. ACS APPLIED MATERIALS & INTERFACES 2016; 8:4266-4274. [PMID: 26760679 DOI: 10.1021/acsami.6b00318] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Cellular dynamics under complex topographical microenvironments are important for many biological processes in development and diseases, but systematic investigation has been limited due to the lack of technology. Herein, we developed a new dynamic cell patterning method based on a cell-friendly photoresist polymer that allows in situ control of cell dynamics on nanostructured surfaces. Using this method, we quantitatively compared the spreading dynamics of cells on nanostructured surfaces to those on flat surfaces. Furthermore, we investigated how cells behaved when they simultaneously encountered two topographically distinct surfaces during spreading. This method will allow many exciting opportunities in the fundamental study of cellular dynamics.
Collapse
Affiliation(s)
- SoonHo Kweon
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio) and ‡Department of Mechanical Engineering, Pohang University of Science and Technology , San31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk 790-784, South Korea
| | - Kwang Hoon Song
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio) and ‡Department of Mechanical Engineering, Pohang University of Science and Technology , San31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk 790-784, South Korea
| | - HyoungJun Park
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio) and ‡Department of Mechanical Engineering, Pohang University of Science and Technology , San31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk 790-784, South Korea
| | - Jong-Cheol Choi
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio) and ‡Department of Mechanical Engineering, Pohang University of Science and Technology , San31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk 790-784, South Korea
| | - Junsang Doh
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio) and ‡Department of Mechanical Engineering, Pohang University of Science and Technology , San31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk 790-784, South Korea
| |
Collapse
|
26
|
Zhang G, Zhang L, Gao H, Konstantinov IA, Arturo SG, Yu D, Torkelson JM, Broadbelt LJ. A Combined Computational and Experimental Study of Copolymerization Propagation Kinetics for 1‐Ethylcyclopentyl methacrylate and Methyl methacrylate. MACROMOL THEOR SIMUL 2016. [DOI: 10.1002/mats201500072] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Guozhen Zhang
- Department of Chemical and Biological Engineering Northwestern University Evanston IL 60208 USA
| | - Lanhe Zhang
- Department of Materials Science and Engineering Northwestern University Evanston IL 60208 USA
| | - Hanyu Gao
- Department of Chemical and Biological Engineering Northwestern University Evanston IL 60208 USA
| | | | - Steven G. Arturo
- The Dow Chemical Company 400 Arcola Rd Collegeville PA 19426 USA
| | - Decai Yu
- The Dow Chemical Company 1776 Building Midland MI 48674 USA
| | - John M. Torkelson
- Department of Chemical and Biological Engineering Northwestern University Evanston IL 60208 USA
- Department of Materials Science and Engineering Northwestern University Evanston IL 60208 USA
| | - Linda J. Broadbelt
- Department of Chemical and Biological Engineering Northwestern University Evanston IL 60208 USA
| |
Collapse
|
27
|
Abstract
Recent advances in dynamic biointerfaces enable spatiotemporal control over cell position and migration after attachment using substrates that employ chemical, optical, thermal, or electrical triggers. This review focuses on flexible and accessible methods for the fabrication of cellular arrays or co cultures for fundamental studies of cell biology or regenerative medicine.
Collapse
Affiliation(s)
| | - Carlos C Co
- University of Cincinnati, Cincinnati, OH 45221
| | - Chia-Chi Ho
- University of Cincinnati, Cincinnati, OH 45221
| |
Collapse
|
28
|
Yamamoto H, Demura T, Sekine K, Kono S, Niwano M, Hirano-Iwata A, Tanii T. Photopatterning Proteins and Cells in Aqueous Environment Using TiO2 Photocatalysis. J Vis Exp 2015:e53045. [PMID: 26554338 PMCID: PMC4692672 DOI: 10.3791/53045] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/31/2022] Open
Abstract
Organic contaminants adsorbed on the surface of titanium dioxide (TiO2) can be decomposed by photocatalysis under ultraviolet (UV) light. Here we describe a novel protocol employing the TiO2 photocatalysis to locally alter cell affinity of the substrate surface. For this experiment, a thin TiO2 film was sputter-coated on a glass coverslip, and the TiO2 surface was subsequently modified with an organosilane monolayer derived from octadecyltrichlorosilane (OTS), which inhibits cell adhesion. The sample was immersed in a cell culture medium, and focused UV light was irradiated to an octagonal region. When a neuronal cell line PC12 cells were plated on the sample, cells adhered only on the UV-irradiated area. We further show that this surface modification can also be performed in situ, i.e., even when cells are growing on the substrate. Proper modification of the surface required an extracellular matrix protein collagen to be present in the medium at the time of UV irradiation. The technique presented here can potentially be employed in patterning multiple cell types for constructing coculture systems or to arbitrarily manipulate cells under culture.
Collapse
Affiliation(s)
- Hideaki Yamamoto
- Frontier Research Institute for Interdisciplinary Sciences, Tohoku University; CREST, Japan Science and Technology Agency;
| | - Takanori Demura
- School of Fundamental Science and Engineering, Waseda University
| | - Kohei Sekine
- School of Fundamental Science and Engineering, Waseda University
| | - Sho Kono
- School of Fundamental Science and Engineering, Waseda University
| | - Michio Niwano
- CREST, Japan Science and Technology Agency; Research Institute of Electrical Communication, Tohoku University
| | - Ayumi Hirano-Iwata
- CREST, Japan Science and Technology Agency; Graduate School of Biomedical Engineering, Tohoku University
| | - Takashi Tanii
- Faculty of Science and Engineering, Waseda University
| |
Collapse
|
29
|
|
30
|
Abstract
The cellular microenvironment is extremely complex, and a plethora of materials and methods have been employed to mimic its properties in vitro. In particular, scientists and engineers have taken an interdisciplinary approach in their creation of synthetic biointerfaces that replicate chemical and physical aspects of the cellular microenvironment. Here the focus is on the use of synthetic materials or a combination of synthetic and biological ligands to recapitulate the defined surface chemistries, microstructure, and function of the cellular microenvironment for a myriad of biomedical applications. Specifically, strategies for altering the surface of these environments using self-assembled monolayers, polymer coatings, and their combination with patterned biological ligands are explored. Furthermore, methods for augmenting an important physical property of the cellular microenvironment, topography, are highlighted, and the advantages and disadvantages of these approaches are discussed. Finally, the progress of materials for prolonged stem cell culture, a key component in the translation of stem cell therapeutics for clinical use, is featured.
Collapse
Affiliation(s)
- A.M. Ross
- Institute of Functional Interfaces, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen 76344, Germany
| | - J. Lahann
- Institute of Functional Interfaces, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen 76344, Germany
- Biointerfaces Institute,
- Department of Chemical Engineering,
- Department of Materials Science and Engineering, and
- Department of Biomedical Engineering, University of Michigan, Ann Arbor, Michigan 48109
| |
Collapse
|
31
|
|
32
|
Song KH, Park SJ, Kim DS, Doh J. Sinusoidal wavy surfaces for curvature-guided migration of T lymphocytes. Biomaterials 2015; 51:151-160. [DOI: 10.1016/j.biomaterials.2015.01.071] [Citation(s) in RCA: 40] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2015] [Accepted: 01/25/2015] [Indexed: 12/13/2022]
|
33
|
Castellarnau M, Szeto GL, Su HW, Tokatlian T, Love JC, Irvine DJ, Voldman J. Stochastic particle barcoding for single-cell tracking and multiparametric analysis. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2015; 11:489-98. [PMID: 25180800 PMCID: PMC4303509 DOI: 10.1002/smll.201401369] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2014] [Revised: 07/29/2014] [Indexed: 05/04/2023]
Abstract
This study presents stochastic particle barcoding (SPB), a method for tracking cell identity across bioanalytical platforms. In this approach, single cells or small collections of cells are co-encapsulated within an enzymatically-degradable hydrogel block along with a random collection of fluorescent beads, whose number, color, and position encode the identity of the cell, enabling samples to be transferred in bulk between single-cell assay platforms without losing the identity of individual cells. The application of SPB is demonstrated for transferring cells from a subnanoliter protein secretion/phenotyping array platform into a microtiter plate, with re-identification accuracies in the plate assay of 96±2%. Encapsulated cells are recovered by digesting the hydrogel, allowing subsequent genotyping and phenotyping of cell lysates. Finally, a model scaling is developed to illustrate how different parameters affect the accuracy of SPB and to motivate scaling of the method to thousands of unique blocks.
Collapse
Affiliation(s)
- Marc Castellarnau
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| | - Gregory L. Szeto
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| | - Hao-Wei Su
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| | - Talar Tokatlian
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| | - J. Christopher Love
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| | - Darrell J. Irvine
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| | - Joel Voldman
- Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge MA 02139, USA
| |
Collapse
|
34
|
Kim M, Doh J. Complex micropatterning of proteins within microfluidic channels. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2015; 2014:782-5. [PMID: 25570075 DOI: 10.1109/embc.2014.6943707] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Microfluidic channels containing protein micropatterned surfaces are useful in many bioanalytical and biological applications. In this study, we developed a new method to integrate microfluidics and protein micropatterning by attaching poly(dimethylsiloxane) (PDMS) microfluidic channels to bio-friendly photoresist films via poly(dopamine) (PDA) adhesive. A bio-friendly photoresist poly(2,2-dimethoxy nitrobenzyl methacrylate-r-methyl methacrylate-r-poly(ethylene glycol) methacrylate) (PDMP) was synthesized and used. By performing microscope projection photolithography (MPP) to the PDMP thin films within PDMS microchannels, complex micropatterns of proteins were successfully generated within microfluidic channels.
Collapse
|
35
|
Wang JC, Liu W, Tu Q, Ma C, Zhao L, Wang Y, Ouyang J, Pang L, Wang J. High throughput and multiplex localization of proteins and cells for in situ micropatterning using pneumatic microfluidics. Analyst 2015; 140:827-36. [DOI: 10.1039/c4an01972e] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
We present a micropatterning method for protein/cell localization by using pneumatically controllable microstructures in an integrated microfluidic device.
Collapse
Affiliation(s)
- Jian-Chun Wang
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
- Energy Research Institute of Shandong Academy of Sciences
| | - Wenming Liu
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| | - Qin Tu
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| | - Chao Ma
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| | - Lei Zhao
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| | - Yaolei Wang
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| | - Jia Ouyang
- School of Materials Science and Engineering
- Northwestern Polytechnical University
- Xi'an
- China
| | - Long Pang
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| | - Jinyi Wang
- Colleges of Science and Veterinary Medicine
- Northwest A&F University
- Yangling
- China
| |
Collapse
|
36
|
Guo L, Guan J, Zhao X, Lin B, Yang H. Design, synthesis, and photosensitive performance of polymethacrylate-positive photoresist-bearingo-nitrobenzyl group. J Appl Polym Sci 2014. [DOI: 10.1002/app.41733] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Affiliation(s)
- Lingxiang Guo
- School of Chemistry and Chemical Engineering; Southeast University; Nanjing 211189 China
| | - Jing Guan
- School of Chemistry and Chemical Engineering; Southeast University; Nanjing 211189 China
| | - Xiaofang Zhao
- School of Chemistry and Chemical Engineering; Southeast University; Nanjing 211189 China
| | - Baoping Lin
- School of Chemistry and Chemical Engineering; Southeast University; Nanjing 211189 China
| | - Hong Yang
- School of Chemistry and Chemical Engineering; Southeast University; Nanjing 211189 China
| |
Collapse
|
37
|
Yamamoto H, Demura T, Morita M, Kono S, Sekine K, Shinada T, Nakamura S, Tanii T. In situ modification of cell-culture scaffolds by photocatalytic decomposition of organosilane monolayers. Biofabrication 2014; 6:035021. [PMID: 25100800 DOI: 10.1088/1758-5082/6/3/035021] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Abstract
We demonstrate a novel application of TiO2 photocatalysis for modifying the cell affinity of a scaffold surface in a cell-culture environment. An as-deposited octadecyltrichlorosilane self-assembled monolayer (OTS SAM) on TiO2 was found to be hydrophobic and stably adsorbed serum albumins that blocked subsequent adsorption of other proteins and cells. Upon irradiation of ultraviolet (UV) light, OTS molecules were decomposed and became permissive to the adhesion of PC12 cells via adsorption of an extracellular matrix protein, collagen. Optimal UV dose was 200 J cm(-2) for OTS SAM on TiO2. The amount of collagen adsorption decreased when excessive UV light was irradiated, most likely due to the surface being too hydrophilic to support its adsorption. This UV-induced modification required TiO2 to be present under the SAM and hence is a result of TiO2 photocatalysis. The UV irradiation for surface modification can be performed before cell plating or during cell culture. We also demonstrate that poly(ethylene glycol) SAM can also be patterned with this method, indicating that it is applicable to both hydrophobic and hydrophilic SAMs. This method provides a unique tool for fabricating cell microarrays and studying dynamical properties of living cells.
Collapse
Affiliation(s)
- Hideaki Yamamoto
- Waseda Institute for Advanced Study, Waseda University, 1-6-1 Nishi-waseda, Shinjuku-ku, Tokyo 169-8050, Japan. Nanotechnology Research Center, Waseda University, 513 Waseda Tsurumaki-cho, Shinjuku-ku, Tokyo 162-0041, Japan
| | | | | | | | | | | | | | | |
Collapse
|
38
|
Rodda AE, Meagher L, Nisbet DR, Forsythe JS. Specific control of cell–material interactions: Targeting cell receptors using ligand-functionalized polymer substrates. Prog Polym Sci 2014. [DOI: 10.1016/j.progpolymsci.2013.11.006] [Citation(s) in RCA: 47] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
39
|
Rahmani S, Saha S, Durmaz H, Donini A, Misra AC, Yoon J, Lahann J. Chemically orthogonal three-patch microparticles. Angew Chem Int Ed Engl 2014; 53:2332-8. [PMID: 24574030 PMCID: PMC5550901 DOI: 10.1002/anie.201310727] [Citation(s) in RCA: 41] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/10/2013] [Indexed: 12/24/2022]
Abstract
Compared to two-dimensional substrates, only a few methodologies exist for the spatially controlled decoration of three-dimensional objects, such as microparticles. Combining electrohydrodynamic co-jetting with synthetic polymer chemistry, we were able to create two- and three-patch microparticles displaying chemically orthogonal anchor groups on three distinct surface patches of the same particle. This approach takes advantage of a combination of novel chemically orthogonal polylactide-based polymers and their processing by electrohydrodynamic co-jetting to yield unprecedented multifunctional microparticles. Several micropatterned particles were fabricated displaying orthogonal click functionalities. Specifically, we demonstrate novel two- and three-patch particles. Multi-patch particles are highly sought after for their potential to present multiple distinct ligands in a directional manner. This work clearly establishes a viable route towards orthogonal reaction strategies on multivalent micropatterned particles.
Collapse
Affiliation(s)
- Sahar Rahmani
- Department of Biomedical Engineering, Chemical Engineering, Macromolecular Science and Engineering, Material Science and Engineering, University of Michigan, Ann Arbor, 48109 (USA) http://www.umich.edu/∼lahannj/index.htm; Institute of Functional Interfaces, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)
| | | | | | | | | | | | | |
Collapse
|
40
|
Rahmani S, Saha S, Durmaz H, Donini A, Misra AC, Yoon J, Lahann J. Chemically Orthogonal Three-Patch Microparticles. Angew Chem Int Ed Engl 2014. [DOI: 10.1002/ange.201310727] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
41
|
Didar TF, Bowey K, Almazan G, Tabrizian M. A miniaturized multipurpose platform for rapid, label-free, and simultaneous separation, patterning, and in vitro culture of primary and rare cells. Adv Healthc Mater 2014; 3:253-60. [PMID: 23949952 DOI: 10.1002/adhm.201300099] [Citation(s) in RCA: 18] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2013] [Revised: 05/10/2013] [Indexed: 11/09/2022]
Abstract
Given that current cell isolation techniques are expensive, time consuming, yield low isolation purities, and/or alter target cell properties, a versatile, cost effective, and easy-to-operate microchip with the capability to simultaneously separate, capture, pattern, and culture rare and primary cells in vitro is developed. The platform is based on target cell adhesion onto the micro-fabricated interfaces produced by microcontact printing of cell-specific antibodies. Results show over 95% separation efficiency in less than 10 min for the separation of oligodendrocyte progenitor cells (OPCs) and cardiomyocytes from rat brain and heart mixtures, respectively. Target cell attachment and single cell spreading can be precisely controlled on the basis of the designed patterns. Both cell types can maintain their biofunctionality. Indeed, isolated OPCs can proliferate and differentiate into mature oligodendrocytes, while isolated cardiomyocytes retain their contractile properties on the separation platform. Successful separation of two dissimilar cell types present in varying concentrations in their respective cell mixtures and the demonstration of their integrity after separation open new avenues for time and cost-effective sorting of various cell types using the developed miniaturized platform.
Collapse
Affiliation(s)
- Tohid Fatanat Didar
- Department of Biomedical Engineering, McGill University, Montréal, QC H3A 2B4, Canada
| | | | | | | |
Collapse
|
42
|
Kang J, Choi JC, Kim M, Jung HR, Doh J. Photopatterning with a printed transparency mask and a protein-friendly photoresist. Methods Cell Biol 2014; 119:55-72. [PMID: 24439279 DOI: 10.1016/b978-0-12-416742-1.00004-4] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Microscope projection photolithography (MPP) based on a protein-friendly photoresist is a versatile tool for the fabrication of protein- and cell-micropatterned surfaces. Photomasks containing various features can be economically produced by printing features on transparency films. Features in photomasks are projected by the objective lens of a microscope, resulting in a significant reduction of the feature size to as small as ~1 μm, close to the practical limit of light-based microfabrication. A fluorescence microscope used in most biology labs can be used for the fabrication process with some modifications. Using such a microscope, multistep MPP can be readily performed with precise registration of each micropattern on transparency film masks. Here, we describe methods of the synthesis and characterization of a protein-friendly photoresist poly(2,2-dimethoxy nitrobenzyl methacrylate-r-methyl methacrylate-r-poly(ethylene glycol) methacrylate) and the setups of fluorescence microscopes and the MPP procedures. In addition, we describe the protocols used in the micropatterning of multiple lymphocytes and the dynamic micropatterning of adherent cells.
Collapse
Affiliation(s)
- Jiwoo Kang
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology, Pohang, Gyeongbuk, South Korea
| | - Jong-Cheol Choi
- Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang, Gyeongbuk, South Korea
| | - Miju Kim
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology, Pohang, Gyeongbuk, South Korea
| | - Hong-Ryul Jung
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology, Pohang, Gyeongbuk, South Korea
| | - Junsang Doh
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology, Pohang, Gyeongbuk, South Korea; Department of Mechanical Engineering, Pohang University of Science and Technology, Pohang, Gyeongbuk, South Korea
| |
Collapse
|
43
|
|
44
|
Choi JC, Jung HR, Doh J. Dynamic modulation of small-sized multicellular clusters using a cell-friendly photoresist. ACS APPLIED MATERIALS & INTERFACES 2013; 5:12757-12763. [PMID: 24256472 DOI: 10.1021/am404134u] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Dynamics of small-sized multicellular clusters is important for many biological processes including embryonic development and cancer metastasis. Previous methods to fabricate multicellular clusters depended on stochastic adhesion and proliferation of cells on defined areas of cell-adhering islands. This made precise control over the number of cells within multicellular clusters impossible. Variation in numbers may have minimal effects on the behavior of multicellular clusters composed of tens of cells but would have profound effects on groups with fewer than ten cells. Herein, we report a new dynamic cell micropatterning method using a cell-friendly photoresist film by multistep microscope projection photolithography. We first fabricated single cell arrays of partially spread cells. Then, by merging neighboring cells, we successfully fabricated multicellular clusters with precisely controlled number, composition, and geometry. Using this method, we generated multicellular clusters of Madin-Darby canine kidney cells with various numbers and initial geometries. Then, we systematically investigated the effect of multicellular cluster sizes and geometries on their motility behaviors. We found that the behavior of small-sized multicellular clusters was not sensitive to initial configurations but instead was determined by dynamic force balances among the cells. Initially, the multicellular clusters exhibited a rounded morphology and minimal translocation, probably due to contractility at the periphery of the clusters. For 2-cell and 4-cell clusters, single leaders emerged over time and entire groups aligned and comigrated as single supercells. Such coherent behavior did not occur in 8-cell clusters, indicating a critical group size led by a single leader may exist. The method developed in the study will be useful for the study of collective migration and multicellular dynamics.
Collapse
Affiliation(s)
- Jong-Cheol Choi
- Department of Mechanical Engineering, ‡School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology , San31, Hyoja-dong, Nam-Gu, Pohang, Gyeongbuk, 790-784, Korea
| | | | | |
Collapse
|
45
|
Andrews RN, Mun KS, Scott C, Ho CC, Co CC. Rapid Prototyping of Heterotypic Cell-Cell Contacts. J Mater Chem B 2013; 1:5773-5777. [PMID: 24466428 PMCID: PMC3899713 DOI: 10.1039/c3tb21038c] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
Disparities in cellular behaviour between cultures of a single cell type and heterogeneous co-cultures require constructing spatially-defined arrays of multiple cell types. Such arrays are critical for investigating cellular properties as they exist in vivo. Current methods rely upon covalent surface modification or external physical micromanipulation to control cellular organization on a limited range of substrates. Here, we report a direct approach for creating co-cultures of different cell types by microcontact printing a photosensitive cell resist. The cell-resistant polymer converts to cell adhesive 0 with light exposure, thus the initial copolymer pattern dictates the position of both cell types. This strategy enables straightforward preparation of tailored heterotypic cell-cell contacts on materials ranging from polymers to metallic substrates.
Collapse
Affiliation(s)
- Ross N. Andrews
- Department of Chemical Engineering, University of Cincinnati, 2901 Woodside Drive, Cincinnati, OH 45221
| | - Kyu-Shik Mun
- Department of Chemical Engineering, University of Cincinnati, 2901 Woodside Drive, Cincinnati, OH 45221
| | - Carl Scott
- Department of Chemical Engineering, University of Cincinnati, 2901 Woodside Drive, Cincinnati, OH 45221
| | - Chia-Chi Ho
- Department of Chemical Engineering, University of Cincinnati, 2901 Woodside Drive, Cincinnati, OH 45221
| | - Carlos C. Co
- Department of Chemical Engineering, University of Cincinnati, 2901 Woodside Drive, Cincinnati, OH 45221
| |
Collapse
|
46
|
Kim M, Song KH, Doh J. PDMS bonding to a bio-friendly photoresist via self-polymerized poly(dopamine) adhesive for complex protein micropatterning inside microfluidic channels. Colloids Surf B Biointerfaces 2013; 112:134-8. [PMID: 23973671 DOI: 10.1016/j.colsurfb.2013.07.021] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2013] [Revised: 06/16/2013] [Accepted: 07/08/2013] [Indexed: 10/26/2022]
Abstract
Protein micropatterned surfaces integrated with microfluidics are useful in numerous bioanalytical and biological applications. In this study, we demonstrated the fabrication of complex protein micropatterned surfaces within poly(dimethylsiloxane) (PDMS) microfluidic channels by attaching the PDMS channels to bio-friendly photoresist films and subsequently performing microscope projection photolithography (MPP). A muscle-inspired poly(dopamine) (PDA) coating was employed to mediate the bonding between the PDMS and the bio-friendly photoresist poly(2,2-dimethoxy nitrobenzyl methacrylate-r-methyl methacrylate-r-poly(ethylene glycol) methacrylate) (PDMP). By adjusting the dip-coating time for the PDA coating, we could successfully introduce sufficient amounts of functional groups on the PDMP surfaces to mediate strong bonding between the PDMS channels and the PDA-coated PDMP thin films with minimal alteration of the surface properties of the PDMP thin films that are critical for protein micropatterning. Using this novel bonding strategy, we successfully fabricated multiple protein micropatterns and gradient micropatterns of proteins within microfluidic channels. The technique developed in this study will be useful for the fabrication of complex biochips for multiplex bioassays and fundamental cell biological studies.
Collapse
Affiliation(s)
- Miju Kim
- School of Interdisciplinary Bioscience and Bioengineering (I-Bio), Pohang University of Science and Technology, Pohang, Gyeongbuk 790-784, Republic of Korea
| | | | | |
Collapse
|
47
|
Ross AM, Lahann J. Surface engineering the cellular microenvironment via patterning and gradients. ACTA ACUST UNITED AC 2013. [DOI: 10.1002/polb.23275] [Citation(s) in RCA: 41] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
|
48
|
Abstract
It is increasingly recognized that cell signaling, as a chemical process, must be considered at the local, micrometer scale. Micro- and nanofabrication techniques provide access to these dimensions, with the potential to capture and manipulate the spatial complexity of intracellular signaling in experimental models. This review focuses on recent advances in adapting surface engineering for use with biomolecular systems that interface with cell signaling, particularly with respect to surfaces that interact with multiple receptor systems on individual cells. The utility of this conceptual and experimental approach is demonstrated in the context of epithelial cells and T lymphocytes, two systems whose ability to perform their physiological function is dramatically impacted by the convergence and balance of multiple signaling pathways.
Collapse
Affiliation(s)
- L.C. Kam
- Deparment of Biomedical Engineering, Columbia University, New York, NY 10027
| | - K. Shen
- Center for Engineering in Medicine, Massachusetts General Hospital, Harvard Medical School, Boston, MA 02114;
| | - M.L. Dustin
- Molecular Pathogenesis Program, Skirball Institute of Biomolecular Medicine, New York University School of Medicine, New York, NY 10016;
| |
Collapse
|
49
|
Choi JC, Doh J. High-throughput quantitative imaging of cell spreading dynamics by multi-step microscopy projection photolithography based on a cell-friendly photoresist. LAB ON A CHIP 2012; 12:4964-4967. [PMID: 23059818 DOI: 10.1039/c2lc40695k] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
A new method for the high-throughput study of cell spreading dynamics is devised by multi-step microscopy projection photolithography based on a cell-friendly photoresist. By releasing a large number of rounded cells in single cell arrays and monitoring their spreading dynamics by interference reflection microscopy, a large number of cell spreading data can be acquired by a single experiment.
Collapse
Affiliation(s)
- Jong-Cheol Choi
- Department of Mechanical Engineering, POSTECH, San31, Hyoja-dong, Nam-Gu, Pohang, 790-784, Gyeongbuk, Korea.
| | | |
Collapse
|
50
|
Jung HR, Choi JC, Cho W, Doh J. Microfabricated platforms to modulate and monitor T cell synapse assembly. WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY 2012; 5:67-74. [DOI: 10.1002/wnan.1182] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|