Spatial control of cell adhesion and patterning through mussel-inspired surface modification by polydopamine

3D printing of gellan-dextran methacrylate IPNs in glycerol and their bioadhesion by RGD derivatives

The ever-growing need for new tissue and organ replacement approaches paved the way for tissue engineering. Successful tissue regeneration requires an appropriate scaffold, which allows cell adhesion and provides mechanical support during tissue repair. In this light, an interpenetrating polymer network (IPN) system based on biocompatible polysaccharides, dextran (Dex) and gellan (Ge), was designed and proposed as a surface that facilitates cell adhesion in tissue engineering applications. The new matrix was developed in glycerol, an unconventional solvent, before the chemical functionalization of the polymer backbone, which provides the system with enhanced properties, such as increased stiffness and bioadhesiveness. Dex was modified introducing methacrylic groups, which are known to be sensitive to UV light. At the same time, Ge was functionalized with RGD moieties, known as promoters for cell adhesion. The printability of the systems was evaluated by exploiting the ability of glycerol to act as a co-initiator in the process, speeding up the kinetics of crosslinking. Following semi-IPNs formation, the solvent was removed by extensive solvent exchange with HEPES and CaCl2, leading to conversion into IPNs due to the ionic gelation of Ge chains. Mechanical properties were investigated and IPNs ability to promote osteoblasts adhesion was evaluated on thin-layer, 3D-printed disk films. Our results show a significant increase in adhesion on hydrogels decorated with RGD moieties, where osteoblasts adopted the spindle-shaped morphology typical of adherent mesenchymal cells. Our findings support the use of RGD-decorated Ge/Dex IPNs as new matrices able to support and facilitate cell adhesion in the perspective of bone tissue regeneration.

Robust adhesive nanocomposite sponge composed of citric acid and nano clays modified cellulose for rapid hemostasis of lethal non-compressible hemorrhage

Massive bleeding control plays the main role in saving people's lives in emergency situations. Herein, modified cellulose-based nanocomposite sponges by polydopamine (PDA) and laponite nano-clay was developed to sturdily deal with non-compressible lethal severe bleeding. PDA accomplishes supreme adhesion in the bleeding site (∼405 kPa) to form strong physical barrier and seal the position. Sponges super porous (∼70 % porosity) and super absorbent capacity (48 g blood absorbed per 1 g sponge) by concentrating the blood cells and platelets provides the requirements for primary hemostasis. Synergistically, the nanocomposite sponges' intelligent chemical structure induces hemostasis by activation of the XI, IX, X, II and FVII factors of intrinsic and extrinsic coagulation pathways. Excellent hemostatic performance of sponges in-vitro was assessed by RBC accumulation (∼100 %), blood clotting index (∼10 %), platelet aggregation/activation (∼93 %) and clotting time. The nanocomposite sponges depicted super performance in the fatal high-pressure non-compressible hemorrhage model by reducing of >2, 15 and 3 times in the bleeding amount at New Zealand rabbit's heart and liver, and rat's femoral artery bleeding models, respectively compared to commercial hemostatic agents (Pvalue˂0.001). The in-vivo host response results exhibited biosafety with no systemic and significant local inflammatory response by hematological, pathological and biochemical parameters assessments.

Driving electrochemical reactions at the microscale using CMOS microelectrode arrays

Precise control of pH values at electrode interfaces enables the systematic investigation of pH-dependent processes by electrochemical means. In this work, we employed high-density complementary metal-oxide-semiconductor (CMOS) microelectrode arrays (MEAs) as miniaturized systems to induce and confine electrochemical reactions in areas corresponding to the pitch of single electrodes (17.5 μm). First, we present a strategy for generating localized pH patterns on the surface of the CMOS MEA with unprecedented spatial resolution. Leveraging the versatile routing capabilities of the switch matrix beneath the CMOS MEA, we created arbitrary combinations of anodic and cathodic electrodes and hence pH patterns. Moreover, we utilized the system to produce polymeric surface patterns by additive and subtractive methods. For additive patterning, we controlled the in situ formation of polydopamine at the microelectrode surface through oxidation of free dopamine above a threshold pH > 8.5. For subtractive patterning, we removed cell-adhesive poly-L-lysine from the electrode surface and backfilled the voids with antifouling polymers. Such polymers were chosen to provide a proof-of-concept application of controlling neuronal growth via electrochemically-induced patterns on the CMOS MEA surface. Importantly, our platform is compatible with commercially available high-density MEAs and requires no custom equipment, rendering the findings generalizable and accessible.

A PDA-Functionalized 3D Lung Scaffold Bioplatform to Construct Complicated Breast Tumor Microenvironment for Anticancer Drug Screening and Immunotherapy

2D cell culture occupies an important place in cancer progression and drug discovery research. However, it limitedly models the "true biology" of tumors in vivo. 3D tumor culture systems can better mimic tumor characteristics for anticancer drug discovery but still maintain great challenges. Herein, polydopamine (PDA)-modified decellularized lung scaffolds are designed and can serve as a functional biosystem to study tumor progression and anticancer drug screening, as well as mimic the tumor microenvironment. PDA-modified scaffolds with strong hydrophilicity and excellent cell compatibility can promote cell growth and proliferation. After 96 h treatment with 5-FU, cisplatin, and DOX, higher survival rates in PDA-modified scaffolds are observed compared to nonmodified scaffolds and 2D systems. The E-cadhesion formation, HIF-1α-mediated senescence decrease, and tumor stemness enhancement can drive drug resistance and antitumor drug screening of breast cancer cells. Moreover, there is a higher survival rate of CD45+ /CD3+ /CD4+ /CD8+ T cells in PDA-modified scaffolds for potential cancer immunotherapy drug screening. This PDA-modified tumor bioplatform will supply some promising information for studying tumor progression, overcoming tumor resistance, and screening tumor immunotherapy drugs.

Polydopamine-Coated Polycaprolactone Electrospun Nanofiber Membrane Loaded with Thrombin for Wound Hemostasis

Hemorrhagic shock is the primary cause of death in patients with severe trauma, and the development of rapid and efficient hemostatic methods is of great significance in saving the lives of trauma patients. In this study, a polycaprolactone (PCL) nanofiber membrane was prepared by electrospinning. A PCL-PDA loading system was developed by modifying the surface of polydopamine (PDA), using inspiration from mussel adhesion protein, and the efficient and stable loading of thrombin (TB) was realized to ensure the bioactivity of TB. The new thrombin loading system overcomes the disadvantages of harsh storage conditions, poor strength, and ease of falling off, and it can use thrombin to start a rapid coagulation cascade reaction, which has the characteristics of fast hemostasis, good biocompatibility, high safety, and a wide range of hemostasis. The physicochemical properties and biocompatibility of the PCL-PDA-TB membrane were verified by scanning electron microscopy, the cell proliferation test, the cell adhesion test, and the extract cytotoxicity test. Red blood cell adhesion, platelet adhesion, dynamic coagulation time, and animal models all verified the coagulation effect of the PCL-PDA-TB membrane. Therefore, the PCL-PDA-TB membrane has great potential in wound hemostasis applications, and should be widely used in various traumatic hemostatic scenarios.

System for Patterning Polydopamine and VAPG Peptide on Polytetrafluoroethylene and Biodegradable Polyesters for Patterned Growth of Smooth Muscle Cells In Vitro

Biomaterial's surface functionalization for selective adhesion and patterned cell growth remains essential in developing novel implantable medical devices for regenerative medicine applications. We built and applied a 3D-printed microfluidic device to fabricate polydopamine (PDA) patterns on the surface of polytetrafluoroethylene (PTFE), poly(l-lactic acid-co-D,l-lactic acid) (PLA), and poly(lactic acid-co-glycolic acid) (PLGA). Then, we covalently attached the Val-Ala-Pro-Gly (VAPG) peptide to the created PDA pattern to promote the adhesion of the smooth muscle cells (SMCs). We proved that the fabrication of PDA patterns allows for the selective adhesion of mouse fibroblast and human SMCs to PDA-patterned surfaces after only 30 min of in vitro cultivation. After 7 days of SMC culture, we observed the proliferation of cells only along the patterns on PTFE but over the entire surface of the PLA and PLGA, regardless of patterning. This means that the presented approach is beneficial for application to materials resistant to cell adhesion and proliferation. The additional attachment of the VAPG peptide to the PDA patterns did not bring measurable benefits due to the high increase in adhesion and patterned cell proliferation by PDA itself.

A versatile and tunable bio-patterning platform for the construction of various cell array biochips

In this work, we report a versatile and tunable platform for the construction of various cell array biochips using a simple soft lithographic approach to pattern polydopamine (PDA) arrays via microcontact printing (μCP). Instead of direct polymerization of PDA on the polydimethylsiloxane (PDMS) tips, dopamine monomers were first printed on the substrate followed by a self-oxidative polymerization step facilitated by ammonia vapor to grow PDA in situ, which greatly reduced the reaction time and prevented the PDMS tips from damaging. The improved robustness and utility of the PDMS tips allows the formation of tunable PDA array chips with controllable PDA feature size and shape. As a result, single cell, multi-cells and cell line arrays can be constructed. The obtained cell array chips showed high single cell capture efficiency, providing a standardized single cell array analysis platform. Meanwhile, the adhered cells can maintain excellent viability and proliferation ability on the PDA chips. Moreover, a cytotoxicity sensor with single cell resolution was enabled on the single cell array chip. This work provides a promising cell array biochip platform for high-throughput cellular analysis and cell screening.

Structural elucidation of polydopamine facilitated by ionic liquid solvation

Minimal understanding of the formation mechanism and structure of polydopamine (pDA) and its natural analogue, eumelanin, impedes the practical application of these versatile polymers and limits our knowledge of the origin of melanoma. The lack of conclusive structural evidence stems from the insolubility of these materials, which has spawned significantly diverse suggestions of pDA's structure in the literature. We discovered that pDA is soluble in certain ionic liquids. Using these ionic liquids (ILs) as solvents, we present an experimental methodology to solvate pDA, enabling us to identify pDA's chemical structure. The resolved pDA structure consists of self-assembled supramolecular aggregates that contribute to the increasing complexity of the polymer. The underlying molecular energetics of pDA solvation and a macroscopic picture of the disruption of the aggregates using IL solvents have been investigated, along with studies of the aggregation mechanism in water.

Impact of Polydopamine Nanoparticle Surface Pattern and Roughness on Interactions with Poly(ethylene glycol) in Aqueous Solution: A Multiscale Modeling and Simulation Study

A significant research effort in the past few years has been devoted to engineering synthetic mimics of naturally occurring eumelanin. One such effort has involved the assembly of oligomers of 5,6-dihydroxyindole (DHI), a synthetic precursor of polydopamine (PDA), into melanin-mimicking nanoparticles for use in a variety of applications with desired optical, photonic, thermal, and electrical properties. In many of these applications, the PDA nanoparticles are mixed with other polymers or oligomers, thus motivating this specific study to understand how the surface characteristics of the assembled PDA-nanoparticles affect their interaction with poly(ethylene glycol) (PEG) chains in aqueous solution. We use molecular dynamics (MD) simulations to study the interaction of linear 20-mer PEG chains with different PDA-nanoparticles assembled using four types of oligomers of 5,6-DHI: two isomers of 5,6-DHI 2-mers with the monomers bonding either at the 2-2' position (A-type isomer) or 7-7' position (B-type isomer), denoted as A:2-mer and B:2-mer, respectively, and a 4-mer and an 8-mer of B-type chemistry denoted as B:4-mer and B:8-mer, respectively. Using explicit-solvent atomistic MD simulations, we find that PDA-nanoparticle surfaces assembled from B:8-mer exhibit smaller density fluctuations of water molecules and, as a result, are relatively more hydrophilic than the PDA-nanoparticle surfaces assembled from A:2-mer, B:2-mer, and B:4-mer. The surface composition of PDA-nanoparticles assembled from A:2-mer contains relatively fewer hydroxyl (-OH) groups compared to PDA-nanoparticles assembled from a B:2-mer, B:4-mer, or B:8-mer, yet the sample of PEG chains show more collapsed and adsorbed conformations on A:2-mer nanoparticles' surface. To explain the atomistically observed behavior of PEG chains on the nanoparticles' surfaces, we use coarse-grained (CG) MD simulations and explain the roles of the pattern formed by the attractive sites (e.g.,-OH groups) exposed on the surface and the roughness of the surface on interactions with a genric PEG-like copolymer chain. By comparing atomistic and CG MD simulation results, we confirm that the -OH groups' pattern on the surface of the PDA-nanoparticle assembled from A:2-mer is patchier than the random or string-like patterns on the PDA-nanoparticle assembled from B:2-mer, B:4-mer, or B:8-mer, and it is this -OH groups' surface pattern that dictates the PEG chain conformations and adsorption on the PDA-nanoparticle surface. Overall, these results guide the design of chemically and physically heterogeneous nanoparticle surfaces for the desired polymer interaction and conformations.

Polydopamine at biological interfaces

In the last years coating of surfaces in the presence of dopamine or other catecholamines in oxidative conditions to yield "polydopamine" films has become a popular, easy and versatile coating methodology. Polydopamine(s) offer(s) also a rich chemistry allowing to post-functionalize the obtained coatings with metal nanoparticles with polymers and proteins. However, the interactions either of covalent or non-covalent nature between polydopamine and biomolecules has only been explored more recently. They allow polydopamine to become a material, in the form of nanoparticles, membranes and other assemblies, in its own right not just as a coating. It is the aim of this review to describe the most recent advances in the design of composites between polydopamine and related eumelanin like materials with biomolecules like proteins, nucleotides, oligosaccharides and lipid assemblies. Furthermore, the interactions between polydopamine and living cells will be also reported.

Versatile polyphenolic platforms in regulating cell biology

Polyphenolic materials are a class of fascinating and versatile bioinspired materials for biointerfacial engineering. In particular, due to the presence of active chemical groups, a series of unique physicochemical properties become accessible and tunable of the as-prepared polyphenolic platforms, which could delicately regulate the cell activities via cell-material contact-dependent interactions. More interestingly, polyphenols could also affect the cell behaviors via cell-material contact-independent manner, which arise due to their intrinsically functional characteristics (e.g., antioxidant and photothermal behaviors). As such, a comprehensive understanding on the relationship between material properties and desired biomedical applications, as well as the underlying mechanism at the cellular and molecular level would provide material design principles and accelerate the lab-to-clinic translation of polyphenolic platforms. In this review, we firstly give a brief overview of cell hallmarks governed by surrounding cues, followed by the introduction of polyphenolic material engineering strategies. Subsequently, a detailed discussion on cell-polyphenols contact-dependent interfacial interaction and contact-independent interaction was also carefully provided. Lastly, their biomedical applications were elaborated. We believe that this review could provide guidances for the rational material design of multifunctional polyphenols and extend their application window.

High-Precision Micropatterning of Polydopamine by Multiphoton Lithography

Mussel-inspired polydopamine (PDA) initiates a multifunctional modification route that leads to the generation of novel advanced materials and their applications. However, existing PDA deposition techniques still exhibit poor spatial control, have a very limited capability of micropatterning, and do not allow local tuning of the PDA topography. Herein, PDA deposition based on multiphoton lithography (MPL) is demonstrated, which enables full spatial and temporal control with nearly total freedom of patterning design. Using MPL, 2D microstructures of complex design are achieved with pattern precision of 0.8 µm without the need of a photomask or stamp. Moreover, this approach permits adjusting the morphology and thickness of the fabricated microstructure within one deposition step, resulting in a unique tunability of material properties. The chemical composition of PDA is confirmed and its ability for protein enzyme immobilization is demonstrated. This work presents a new methodology for high-precision and complete control of PDA deposition, enabling PDA incorporation in applications where fine and precise local surface functionalization is required. Possible applications include multicomponent functional elements and devices in microfluidics or lab-on-a-chip systems.

Polydopamine-Bi2WO6-Decorated Gauzes as Dual-Functional Membranes for Solar Steam Generation and Photocatalytic Degradation Applications

The dual-functional Bi2WO6/polydopamine (PDA)-modified gauze membrane has been developed for applications in photocatalytic degradation and solar steam generation. Two types of membrane were prepared by changing the growth sequence of Bi2WO6 nanomaterials and PDA on gauze substrates. The spatial distribution of Bi2WO6 and polydopamine has a great influence on light absorption, photocatalytic degradation, and solar steam generation performances. Bi2WO6 photocatalysts can absorb short-wavelength light for the photocatalytic decoloration of organic dyes. The photothermal polydopamine can convert light into heat for water evaporation. Besides, the gauze substrate provides water transport channels to facilitate water evaporation. The morphology, surface chemistry, and optical properties of Bi2WO6-PDA modified gauzes were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and diffuse reflectance spectra. The photothermal properties, wetting properties, and solar steam generation rates of the composite films were also studied. Degradation of 96% of indigo carmine was achieved after being irradiated for 120 min in the presence of G/PDA/BWNP. The water evaporation rates of the G/BWP/PDA sample under the irradiation of an Xe lamp (light intensity = 1000 W/m2) reached 1.94 kg·m-2·h-1.

Study on the biological behaviors of CaP coatings with different morphology on carbon/carbon composites

In this work, we designed and fabricated a CaP composite bio-coating with different surface morphologies on a carbon/carbon (C/C) matrix by means of hybrid supersonic atmospheric plasma spraying (SAPS) and microwave-hydrothermal (MH) technologies. We found that all studied coating materials can support mesenchymal stem cells (MSCs) proliferation with prolonged culture time (3 days and 7 days) in vitro. Furthermore, according to the (Confocal Laser Scanning Microscopy) CLSM results, the MSCs also showed good attachment and different spreading morphologies on SAPS/MH coatings. As such, C/C matrix, the MH treated coatings with needle-like and rod-like microstructures were chosen for further in vivo investigation. Considering the good bonding between host tissue and the studied materials, the in vivo morphology studies confirmed a good histocompatibility for all coating samples, as well as a decreasing expression for inflammatory factors in a physiological environment. The histological results around the implants indicated different cell aggregation and vascularization ability in the local micro-environment. In particular, based on the reduction of the C/C initial surface flaws (e.g. hydrophobicity, biological inertia and easily producing carbon fragments or particles), the MH treated coating with rod-like surface morphology with a specific surface area (~2.33 m²/g) and roughness (~13.80 μm), showed excellent performance as a promising implant in live tissue.

One-step harvest and delivery of micropatterned cell sheets mimicking the multi-cellular microenvironment of vascularized tissue

Techniques for harvest and delivery of cell sheets have been improving for decades. However, cell sheets with complicated patterns closely related to natural tissue architecture were hardly achieved. Here, we developed an efficient method to culture and harvest cell sheets with complex shape (noted as microtissues) using temperature-responsive hydrogel consisting of expandable polyethylene oxide polymer at low temperature. Firstly, a temperature-responsive hydrogel surface with honeycomb patterns (50 and 100 µm in width) were developed through microcontact printing of polydopamine (PD). The human dermal fibroblasts (HDFBs) and human umbilical vein endothelial cells (HUVECs) spontaneously formed honeycomb-shaped microtissues on the patterned hydrogel surface. The microtissues on the hydrogel were able to be harvested and directly delivered to the desired target through thermal expansion of the hydrogel at 4 °C with an efficiency close to 80% within 10 min which is faster than conventional method based on poly(N-isopropylacrylamide). The microtissues maintained their original honeycomb network and intact structures. Honeycomb-patterned cell sheets also were fabricated through serial seeding of various cell lines, including HDFBs, HUVECs, and human adipose-derived stem cells, in which cells were attached along the honeycomb pattern. The underlying honeycomb patterns in the cell sheets were successfully maintained for 3 days, even after delivery. In addition, patterned cell sheets were successfully delivered in vivo while maintaining an intact structure for 7 days. Together, our findings demonstrate that micropatterned temperature-responsive hydrogel is an efficient method of one-step culturing and delivery of complex microtissues and should prove useful in various tissue engineering applications. STATEMENT OF SIGNIFICANCE: Scaffold-free cell delivery techniques, including cell sheet engineering, have been developed for decades. However, there is limited research regarding culture and delivery of microtissues with complex architecture mimicking natural tissue. Herein, we developed a micro-patterned hydrogel platform for the culture and delivery of honeycomb-shaped microtissues. Honeycomb patterns were chemically engineered on the temperature-responsive hydrogel through microcontact printing of polydopamine to selectively allow for human dermal fibroblast or human umbilical vein endothelial cell adhesion. They spontaneously formed honeycomb-shaped microtissues within 24 hr upon cell seeding and directly delivered to various target area including in vivo via thermal expansion of the hydrogel at 4 °C, suggesting that the micro-patterned hydrogel can be an efficient tool for culture and delivery of complex microtissue.

Polydopamine nanofilms for high-performance paper-based electrochemical devices

Since the discovery of polydopamine (PDA), there has been a lot of progress on using this substance to functionalize many different surfaces. However, little attention has been given to prepare functionalized surfaces for the preparation of flexible electrochemical paper-based devices. After fabricating the electrodes on paper substrates, we formed PDA on the surface of the working electrode using a chemical polymerization route. PDA nanofilms on carbon were characterized by contact angle (CA) experiments, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy (topography and electrical measurements) and electrochemical techniques. We observed that PDA introduces chemical functionalities (RNH₂ and RC═O) that decrease the CA of the electrode. Moreover, PDA nanofilms did not block the heterogeneous electron transfer. In fact, we observed one of the highest standard heterogeneous rate constants (k_s ) for electrochemical paper-based electrodes (2.5 ± 0.1) × 10^-3  cm s^-1 , which is an essential parameter to obtain larger currents. In addition, our results suggest that carbonyl functionalities are ascribed for the redox activity of the nanofilms. As a proof-of-concept, the electrooxidation of nicotinamide adenine dinucleotide showed remarkable features, such as, lower oxidation potential, electrocatalytic peak currents more than 30 times higher when compared to unmodified paper-based electrodes and electrocatalytic rate constant (k_obs ) of (8.2 ± 0.6) × 10²  L mol^-1  s^-1 .

Conventional and emerging strategies for the fabrication and functionalization of PDMS-based microfluidic devices

Microfluidics is an emerging and multidisciplinary field that is of great interest to manufacturers in medicine, biotechnology, and chemistry, as it provides unique tools for the development of point-of-care diagnostics, organs-on-chip systems, and biosensors. Polymeric microfluidics, unlike glass and silicon, offer several advantages such as low-cost mass manufacturing and a wide range of beneficial material properties, which make them the material of choice for commercial applications and high-throughput systems. Among polymers used for the fabrication of microfluidic devices, polydimethylsiloxane (PDMS) still remains the most widely used material in academia due to its advantageous properties, such as excellent transparency and biocompatibility. However, commercialization of PDMS has been a challenge mostly due to the high cost of the current fabrication strategies. Moreover, specific surface modification and functionalization steps are required to tailor the surface chemistry of PDMS channels (e.g. biomolecule immobilization, surface hydrophobicity and antifouling properties) with respect to the desired application. While significant research has been reported in the field of PDMS microfluidics, functionalization of PDMS surfaces remains a critical step in the fabrication process that is difficult to navigate. This review first offers a thorough illustration of existing fabrication methods for PDMS-based microfluidic devices, providing several recent advancements in this field with the aim of reducing the cost and time for mass production of these devices. Next, various conventional and emerging approaches for engineering the surface chemistry of PDMS are discussed in detail. We provide a wide range of functionalization techniques rendering PDMS microchannels highly biocompatible for physical or covalent immobilization of various biological entities while preventing non-specific interactions.

Effect of Substituents in Mussel-inspired Surface Primers on their Oxidation and Priming Efficiency

Marine mussels contain an abundant catechol moiety, 3,4-dihydroxyphenylalanine (DOPA), in their interfacial foot proteins. DOPA contributes to both surface adhesion and bridging between the surface and overhead proteins (surface priming) by taking advantage of the unique redox properties of catechol. Inspired by the mussel surface priming mechanism, herein we synthesized a series of DOPA-mimetic analogs - a bifunctional group molecule, consisting of a catechol group and an acrylic group at the opposite ends. The surface primers with differently substituted (-COOH, -CH3 ) alkyl chains in the middle spacer were synthesized. Time-dependent oxidation and redox potentials of the surface primers were studied in an oxidizing environment to gain a better understanding of the mussel's redox chemistry. The thickness and degree of priming of the surface primers on silicon-based substrates were analyzed by ellipsometry and UV/Vis absorption spectroscopy. The post-reactivity of the acrylic groups of the primed layer was first visualized through a reaction with an acrylic group-reactive dye.

Post-treatments of polydopamine coatings influence cellular response

Polydopamine (PDA) is the final oxidation product of dopamine or other catecholamines. Since the first reports of PDA coatings starting around 2007, these coatings have been widely studied as a versatile and inexpensive one-step coating option for biomaterial functionalization. The coating attach to a wide range of materials and can subsequently be modified with biomolecules or nanoparticles. However, as a strong candidate for biomaterial research and even clinical use, it is important to unravel the changes in physico-chemical properties and the cell-PDA interaction as a function of heat sterilization procedures and shelf storage periods. Four groups were examined in this study: titanium (Ti), PDA-coated Ti samples and PDA-coated Ti samples either stored for up to two weeks at room temperature or heated at 121 °C for 24 h, respectively. We used X-ray Photoelectron Spectroscopy (XPS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Water contact angle (WCA) to characterize chemical composition and surface properties of the groups. Cell adhesion and proliferation was examined by three different cell types: human primary dermal fibroblasts (hDF), human epidermal keratinocytes (HaCaTs) and a murine preosteoblastic cell line (MC3T3-E1), respectively. Cells were cultured on PDA coated samples for 4 h, 3 days and 5 days. Both thermal treatment of PDA at 121℃ for 24 h and storage of the samples for 2 weeks increased the amount of quinone groups at the surface and decreased the amount of primary amine groups as detected by XPS and ToF-SIMS. Even though these surface reactions increased the WCA of the PDA coating, we found that the post-treatments increased cell proliferation for both hDFs, HaCaTs and MC3T3-E1 s as compared to pristine PDA. This emphasizes the importance of post-treatment and shelf-time for PDA coatings.

Investigation of human adipose-derived stem-cell behavior using a cell-instructive polydopamine-coated gelatin-alginate hydrogel

Hydrogels can be fabricated and designed to exert direct control over stem cells' adhesion and differentiation. In this study, we have investigated the use of polydopamine (pDA)-treatment as a binding platform for bioactive compounds to create a versatile gelatin-alginate (Gel-Alg) hydrogel for tissue engineering applications. Precisely, pDA was used to modify the surface properties of the hydrogel and better control the adhesion and osteogenic differentiation of human adipose-derived stem cells (hASCs). pDA enabled the adsorption of different types of bioactive molecules, including a model osteoinductive drug (dexamethasone) as well as a model pro-angiogenic peptide (QK). The pDA treatment efficiently retained the drug and the peptide compared to the untreated hydrogel and proved to be effective in controlling the morphology, cell area, and osteogenic differentiation of hASCs. Overall, the findings of this study confirm the efficacy of pDA treatment as a valuable strategy to modulate the biological properties of biocompatible Gel-Alg hydrogels and further extend their value in regenerative medicine.

Facile cell patterning induced by combined surface topography and chemistry on polydopamine-defined nanosubstrates

Cell patterning holds significant implications for cell-based analysis and high-throughput screening. The challenge and key factor for formation of cell patterns is to precisely modulate the interaction between cells and substrate surfaces. Many nanosubstrates have been developed to control cell adhesion and patterning, however, requirements of complicated fabrication procedures, harsh reaction conditions, and delicate manipulation are not routinely feasible. Here, we developed a hierarchical polydimethylsiloxane nanosubstrate (HPNS) coated with mussel-inspired polydopamine (PDA) micropatterns for effective cell patterning, depending on both surface topography and chemistry. HPNSs obtained by facile template-assisted replication brought enhanced topographic interaction between cells and substrates, but they were innately hydrophobic and cell-repellent. The hydrophobic nanosubstrates were converted to be hydrophilic after PDA coatings formed via spontaneous self-polymerization, which greatly facilitated cell adhesion. As such, without resorting to any external forces or physical constraints, cells selectively adhered and spread on spatially defined PDA regions with high efficiency, and well-defined cell microarrays could be formed within 20 min. Therefore, this easy-to-fabricate nanosubstrate with no complex chemical modification will afford a facile yet effective platform for rapid cell patterning.

Large fuzzy biodegradable polyester microspheres with dopamine deposition enhance cell adhesion and bone regeneration in vivo

The biodegradable polymer microparticles with different surface morphology and chemical compositions may influence significantly the behaviors of cells, and thereby further the performance of tissue regeneration in vivo. In this study, multi-stage hierarchical textures of poly(D,L-lactic-co-glycolide) (PLGA)/PLGA-b-PEG (poly(ethylene glycol)) microspheres with a diameter as large as 50-100 μm are fabricated based on interfacial instability of an emulsion. The obtained fuzzy structures on the microspheres are sensitive to annealing, which are changed gradually to a smooth one after treatment at 37 °C for 6 d or 80 °C for 1 h. The surface microstructures that are chemically dominated by PEG can be stabilized against annealing by dopamine deposition. By the combination use of annealing and dopamine deposition, a series of microspheres with robust surface topologies are facilely prepared. The fuzzy microstructures and dopamine deposition show a synergetic role to enhance cell-material interaction, leading to a larger number of adherent bone marrow-derived mesenchymal stem cells (BMSCs), A549 and MC 3T3 cells. The fuzzy microspheres with dopamine deposition can significantly promote bone regeneration 12 w post surgery in vivo, as revealed by micro-CT, histological, western blotting and RT-PCR analyses.

Strategies to Get Drugs across Bladder Penetrating Barriers for Improving Bladder Cancer Therapy

Bladder cancer is a significant public health concern and social burden due to its high recurrence risk. Intravesical drug instillation is the primary therapy for bladder cancer to prevent recurrence. However, the intravesical drug therapeutic effect is limited by bladder penetrating barriers. The inadequate intravesical treatment might cause the low drug concentration in lesions, resulting in a high recurrence/progression rate of bladder cancer. Many strategies to get drugs across bladder penetrating barriers have been developed to improve intravesical treatment, including physical and chemical methods. This review summarizes the classical and updated literature and presents insights into great therapeutic potential strategies to overcome bladder penetrating barriers for improving the intravesical treatment of bladder cancer.

An Adhesive Peptide from the C-Terminal Domain of α-Synuclein for Single-Layer Adsorption of Nanoparticles onto Substrates

The two-dimensional (2D) homogeneous assembly of nanoparticle monolayer arrays onto a broad range of substrates constitutes an important challenge for chemistry, nanotechnology, and material science. α-Synuclein (αS) is an intrinsically disordered protein associated with neuronal protein complexes and has a high degree of structural plasticity and chaperone activity. The C-terminal domain of αS has been linked to the noncovalent interactions of this protein with biological targets and the activity of αS in presynaptic connections. Herein, we have systematically studied peptide fragments of the chaperone-active C-terminal sequence of αS and identified a 17-residue peptide that preserves the versatile binding nature of αS. Attachment of this short peptide to gold nanoparticles afforded colloidally stable nanoparticle suspensions that allowed the homogeneous 2D adhesion of the conjugates onto a wide variety of surfaces, including the formation of crystalline nanoparticle superlattices. The peptide sequence and the strategy reported here describe a new adhesive molecule for the controlled monolayer adhesion of metal nanoparticles and sets a stepping-stone toward the potential application of the adhesive properties of αS.

Lanthanides-Substituted Hydroxyapatite/Aloe vera Composite Coated Titanium Plate for Bone Tissue Regeneration

PURPOSE

To develop the surface-treated metal implant with highly encouraged positive properties, including high anti-corrosiveness, bio-activeness and bio-compatibleness for orthopedic applications.

METHODS

In this work, the surface of commercially pure titanium (Ti) metal was treated with bio-compatible polydopamine (PD) by merely immersing the Ti plate in PD solution. The composite of trivalent lanthanide minerals (La3+, Ce3+ and Gd3+)-substituted hydroxyapatite (MHAP) with Aloe vera (AV) gel was prepared and coated on the PD-Ti plate by electrophoretic deposition (EPD) method. The choice of trivalent lanthanide ions is based on their bio-compatible nature and bone-seeking properties. The formation of the PD layer, composites, and composite coatings on Ti plate and PD-Ti surface was confirmed by FT-IR, XRD, SEM and HR-TEM observations. In-vitro assessments such as osteoblasts like MG-63 cell viability, alkaline phosphatase activity and mineralization ability of the MHAP/AV composite were tested, and the composite-coated plate was implanted into a rat bone defect model for in-vivo bone regeneration studies.

RESULTS

The coating ability of the MHAP/AV composite was highly preferred to PD-treated Ti plate than an untreated Ti plate due to the metal absorption ability of PD. This was confirmed by SEM analysis. The in-vitro and in-vivo studies show the better osteogenic ability of MHAP/AV composite at 14th day and 4th week of an experimental period, respectively.

CONCLUSION

The osteoblast ability of the fabricated device without producing any adverse effect in the rat model recommends that the fabricated device would serve as a better platform on the hard tissue regeneration for load-bearing applications of orthopedics.

Enhanced Biocompatibility and Differentiation Capacity of Mesenchymal Stem Cells on Poly(dimethylsiloxane) by Topographically Patterned Dopamine

Controlling the behavior of mesenchymal stem cells (MSCs) through topographic patterns is an effective approach for stem cell studies. We, herein, reported a facile method to create a dopamine (DA) pattern on poly(dimethylsiloxane) (PDMS). The topography of micropatterned DA was produced on PDMS after plasma treatment. The grid-topographic-patterned surface of PDMS-DA (PDMS-DA-P) was measured for adhesion force and Young's modulus by atomic force microscopy. The surface of PDMS-DA-P demonstrated less stiff and more elastic characteristics compared to either nonpatterned PDMS-DA or PDMS. The PDMS-DA-P evidently enhanced the differentiation of MSCs into various tissue cells, including nerve, vessel, bone, and fat. We further designed comprehensive experiments to investigate adhesion, proliferation, and differentiation of MSCs in response to PDMS-DA-P and showed that the DA-patterned surface had good biocompatibility and did not activate macrophages or platelets in vitro and had low foreign body reaction in vivo. Besides, it protected MSCs from apoptosis as well as excessive reactive oxygen species (ROS) generation. Particularly, the patterned surface enhanced the differentiation capacity of MSCs toward neural and endothelial cells. The stromal cell-derived factor-1α/CXantiCR4 pathway may be involved in mediating the self-recruitment and promoting the differentiation of MSCs. These findings support the potential application of PDMS-DA-P in either cell treatment or tissue repair.

Polydopamine-Bridged Synthesis of Ternary h-BN@PDA@TiO2 as Nanoenhancers for Thermal Conductivity and Flame Retardant of Polyvinyl Alcohol

In this study, h-BN@PDA@TiO₂ hybrid nanoparticles were prepared and used as functional fillers to prepare PVA nanocomposites, and the effects of hybrid particles on PVA thermal conductivity and flame retardant properties were studied. The results showed that hybrid particles could significantly improve the thermal conductivity and flame retardant performance of PVA composites, and effectively inhibit the release of toxic gases such as combustible pyrolysis products and CO, which enhanced the fire safety of PVA composites. When the addition amount of hybrid particles is 5 wt%, the thermal conductivity of PVA composites is 239.1% higher than that of the pure PVA and the corresponding temperature of PVA composites with a mass loss of 5 wt% was 16.2°C higher than that of the pure PVA. This is due to the barrier effect of h-BN and the protective effect of dense carbon layer catalyzed by TiO₂.

Superhydrophilic Polyurethane/Polydopamine Nanofibrous Materials Enhancing Cell Adhesion for Application in Tissue Engineering

The use of nanofibrous materials in the field of tissue engineering requires a fast, efficient, scalable production method and excellent wettability of the obtained materials, leading to enhanced cell adhesion. We proposed the production method of superhydrophilic nanofibrous materials in a two-step process. The process is designed to increase the wettability of resulting scaffolds and to enhance the rate of fibroblast cell adhesion. Polyurethane (PU) nanofibrous material was produced in the solution blow spinning process. Then the PU fibers surface was modified by dopamine polymerization in water solution. Two variants of the modification were examined: dopamine polymerization under atmospheric oxygen (V-I) and using sodium periodate as an oxidative agent (V-II). Hydrophobic PU materials after the treatment became highly hydrophilic, regardless of the modification variant. This effect originates from polydopamine (PDA) coating properties and nanoscale surface structures. The modification improved the mechanical properties of the materials. Materials obtained in the V-II process exhibit superior properties over those from the V-I, and require shorter modification time (less than 30 min). Modifications significantly improved fibroblasts adhesion. The cells spread after 2 h on both PDA-modified PU nanofibrous materials, which was not observed for unmodified PU. Proposed technology could be beneficial in applications like scaffolds for tissue engineering.

Polydopamine and Its Derivative Surface Chemistry in Material Science: A Focused Review for Studies at KAIST

Polydopamine coating, the first material-independent surface chemistry, and its related methods significantly influence virtually all areas of material science and engineering. Functionalized surfaces of metal oxides, synthetic polymers, noble metals, and carbon materials by polydopamine and its related derivatives exhibit a variety of properties for cell culture, microfluidics, energy storage devices, superwettability, artificial photosynthesis, encapsulation, drug delivery, and numerous others. Unlike other articles, this review particularly focuses on the development of material science utilizing polydopamine and its derivatives coatings at the Korea Advanced Institute of Science and Technology for a decade. Herein, it is demonstrated how material-independent coating methods provide solutions for challenging problems existed in many interdisciplinary areas in bio-, energy-, and nanomaterial science by collaborations and independent research.

Enhanced cell affinity and osteogenic differentiation of liquid crystal-based substrate via surface bio-functionalization

Regulation of cell-substrate interactions is an important factor for modulating cell behaviors. Tailoring the physical and chemical properties of the substrates to better mimic the extracellular matrix (ECM) of native tissue is a more effective strategy for enhancing the cell-substrate contact. In current work, we aim at improving surface bioactivity based on the liquid crystalline substrates for the enhancement in cell affinity and osteogenic differentiation. Polydopamine (PDOPA) adhesive coating was used as a reactive platform for the immobilization of chitooligosaccharide (COS) on the octyl hydroxypropyl cellulose ester (OPC) substrate to generate active OPC-PDOPA-COSs liquid crystalline substrates. Results demonstrated that PDOPA-coated OPC surfaces showed remarkably improved hydrophility and increased elastic modulus, leading to better initial cell attachment. Subsequent COS immobilization on the OPC-PDOPA layer could induce promotion of cell proliferation, polarization and cytoskeleton formation. Rat bone marrow mesenchymal stem cells (rBMSCs) seeded on the OPC-PDOPA-COSs showed higher alkaline phosphatase (ALP) activity, calcium deposition, and up-regulated bone-related genes expression, including BMP-2, RUNx-2, COL-I and OCN. In conclusion, surface biofunctionalization on the OPC-based liquid crystalline substrates could come into being the appropriate combination of surface chemistry and liquid crystalline characteristic that simulating in vivo ECM environment, resulting in a favorable support to enhance positive cell-substrate interactions.

Metallic Nanoparticle-Decorated Polydopamine Thin Films and Their Cell Proliferation Characteristics

Plasmonic metal nanoparticle (NP)-decorated thin films of biobased and biocompatible polymers provide significant opportunities in various biomedical applications. Inspired from the adhesive proteins of the marine mussels, polydopamine (PDA) serves as a versatile, biocompatible, and simple thin-film material and enhances cell growth and proliferation. Herein, we report the fabrication of the gold NPs (AuNPs) or silver NPs (AgNPs)-deposited thin films of PDA and their employment in cell growth and proliferation. PDA thin film with its numerous functional groups enabled well-controlled adsorption of NPs. The number density of NPs was manipulated simply by tuning the deposition time. Cell viability test for human lung cancer (A549) and human colon cancer (CaCO2) cell lines indicated that a thin layer of PDA film remarkably enhanced the cell growth and proliferation. The lower number density of NPs for the 24 h of the culture time resulted in a higher proliferation rate. However, the increase in both the number density of NPs and culture time led to a decrease in cell growth.

Dopamine-Modified Zero-Valent Iron Nanoparticles for Dual-Modality Photothermal and Photodynamic Breast Cancer Therapy

Phototherapy has the advantages of minimal invasion, few side effects, and improved accuracy for cancer therapy. The application of a polydopamine (PDA)-modified nano zero-valent iron (nZVI@PDA) as a new synergistic agent in combination with photodynamic/photothermal (PD/PT) therapy to kill cancer cells is discussed here. The nZVI@PDA offered high light-to-heat conversion and ROS generation efficiency under near-infrared (NIR) irradiation (808 nm), thus leading to irreversible damage to nZVI@PDA-treated MCF-7 cells at low concentration, without inducing apoptosis in normal cells. Irradiation of nZVI@PDA using an NIR laser converted the energy of the photons to heat and ROS. Our results showed that modification of the PDA on the surface of nZVI can improve the biocompatibility of the nZVI@PDA. This work integrated the PD and PT effects into a single nanodevice to afford a highly efficient cancer treatment. Meanwhile, nZVI@PDA, which combines the advantages of PDA and nZVI, displayed excellent biocompatibility and tumoricidal ability, thus suggesting its huge potential for future clinical research in cancer therapy.

Polydopamine-Modified Al2O3/Polyurethane Composites with Largely Improved Thermal and Mechanical Properties

Alumina/polyurethane composites were prepared via in situ polymerization and used as thermal interface materials (TIMs). The surface of alumina particles was modified using polydopamine (PDA) and then evaluated via Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and Raman spectroscopy (Raman). Scanning electron microscope (SEM) images showed that PDA-Al2O3 has better dispersion in a polyurethane (PU) matrix than Al2O3. Compared with pure PU, the 30 wt% PDA-Al2O3/PU had 95% more Young's modulus, 128% more tensile strength, and 76% more elongation at break than the pure PU. Dynamic mechanical analysis (DMA) results showed that the storage modulus of the 30 wt% PDA-Al2O3/PU composite improved, and the glass transition temperature (Tg) shifted to higher temperatures. The thermal conductivity of the 30 wt% PDA-Al2O3/PU composite increased by 138%. Therefore, the results showed that the prepared PDA-coated alumina can simultaneously improve both the mechanical properties and thermal conductivity of PU.

Fast Polymerization of Polydopamine Based on Titanium Dioxide for High-Performance Flexible Electrodes

Dopamine (DA) and its derivatives are promising for the fabrication of functional films and devices with excellent conductivity and long-term stability; nevertheless its polymerization process is typically prolonged. We have proposed the accelerated deposition process using ultraviolet (UV) irradiation with the existence of nanotitanium dioxide (nano-TiO₂) in order to realize the rapid and stable synthesis of polydopamine (PDA) films. The in situ deposition process of nanostructured coatings such as platinum nanowire (PtNW) was also proposed by reducing the time of polymerization process to less than 1 h. It also increased the platinum (Pt) chelating rate with PDA, which was about 12 times faster than the traditional photo-oxidation method. Compared with the electrodes of the same size based on Ti/Pt sputtering, the impedance of the proposed PDA/TiO₂/PtNW coated electrode was as low as 0.0968 ± 0.0054 kΩ at 1 kHz (reduction of 99.74%). An extremely high cathodic charge storage capacity (CSC_c) up to 234.4 ± 3.16 mC cm^-2 was also observed, which was about 106.5 and 1.6 times higher than that of Ti/Pt and PDA/PtNW electrodes, respectively. In addition to that, significant photocurrent polarization responses were presented for PDA/TiO₂/PtNW electrodes with a stable current of -136.1 μA, exhibiting excellent charge transfer and UV absorption capacities. This co-deposition method has demonstrated great potential to speed up the polymerization process and enhance the electrical performance for flexible electrodes.

Large-scale acoustic-driven neuronal patterning and directed outgrowth

Acoustic manipulation is an emerging non-invasive method enabling precise spatial control of cells in their native environment. Applying this method for organizing neurons is invaluable for neural tissue engineering applications. Here, we used surface and bulk standing acoustic waves for large-scale patterning of Dorsal Root Ganglia neurons and PC12 cells forming neuronal cluster networks, organized biomimetically. We showed that by changing parameters such as voltage intensity or cell concentration we were able to affect cluster properties. We examined the effects of acoustic arrangement on cells atop 3D hydrogels for up to 6 days and showed that assembled cells spontaneously grew branches in a directed manner towards adjacent clusters, infiltrating the matrix. These findings have great relevance for tissue engineering applications as well as for mimicking architectures and properties of native tissues.

A multifunctional nanocomposite spray dressing of Kappa-carrageenan-polydopamine modified ZnO/L-glutamic acid for diabetic wounds

Sprayable bioadhesives with exceptional properties were developed for application in wound healing. In this study, a visible light-crosslinkable nanocomposite bioadhesive hydrogel with multifunctional properties was proposed. While methacrylated Kappa-carrageenan (KaMA), mimicking the natural glycosaminoglycan was applied as the hydrogel matrix, various concentrations of polydopamine modified ZnO (ZnO/PD) nanoparticles (0, 0.5, 1 and 2 wt%) was loaded in it to improve its mechanical, antibacterial and cellular properties. Moreover, L-glutamic acid was incorporated in the nanocomposite hydrogel network to accelerate wound healing. The nanocomposite hydrogels revealed significant mechanical property and recovery ability, comparable elasticity with human skin and great adhesiveness. For instance, the tensile strength of KaMA hydrogel enhanced from 64.1 ± 10 to 80.3 ± 8 kPa and elongation jumped from 20 ± 4% to 61 ± 5% after incorporation of 1 wt% ZnO/PD nanoparticles. The nanocomposite hydrogels demonstrated effectual blood clotting ability and biocompatibility, >95% cell viability after 3 days of incubation. In vivo experiments also suggested that L-glutamic acid loaded nanocomposite hydrogel considerably accelerated wound healing with superior granulation tissue thickness than control in a full-thickness skin defect model. Taken together, this visible-light crosslinking nanocomposite hydrogel with significant properties could be used to spray on a wound area to eliminate wound infection and accelerate wound healing process.

Dexamethasone loaded bilayered 3D tubular scaffold reduces restenosis at the anastomotic site of tracheal replacement: in vitro and in vivo assessments

Despite recent developments in the tracheal tissue engineering field, the creation of a patient specific substitute possessing both appropriate mechanical and biointerfacial properties remains challenging. Most tracheal replacement therapies fail due to restenosis at the anastomosis site. In this study, we designed a robust, biodegradable, 3D tubular scaffold by combining electrospinning (ELSP) and 3D (three-dimensional) printing techniques for use in transplantation therapy. After that, we loaded dexamethasone (DEX) onto the 3D tubular scaffold using mild surface modification reactions by using polydopamine (PDA), polyethyleneimine (PEI), and carboxymethyl-β-cyclodextrin (βCD). As a result, the fabricated 3D tubular scaffold had robust mechanical properties and the chemical modifications were confirmed to have proceeded successfully by physico-chemical analysis. The surface treatments allowed for a larger amount of DEX to be loaded onto the βCD modified scaffold as compared to the bare group. In vitro and in vivo studies demonstrated that the DEX loaded 3D tubular scaffold exhibited significantly enhanced anti-inflammation activity, enhanced tracheal mucosal regeneration, and formation of a patent airway. From our results, we believe that our system may represent an innovative paradigm in tracheal tissue engineering by providing proper mechanical properties and successful formation of tracheal tissue as a means of remodeling and healing tracheal defects for use in transplantation therapy.

Engineering Shelf-Stable Coating for Microfluidic Organ-on-a-Chip Using Bioinspired Catecholamine Polymers

The conceptualization of body-on-a-chip in 2004 resulted in a new approach for studying human physiology in three-dimensional culture. Despite pioneering works and the progress made in replicating human physiology on-a-chip, the stability, reliability, and preservation of cell-culture-treated microfluidic chips remain a challenge. The development of a reliable surface treatment technique to more efficiently and reproducibly modify microfluidic channels would significantly simplify the process of creating and implementing organ-on-a-chip (OOC) systems. In this work, a new flow-based coating technique using bioinspired polymers was implemented to create reliable, reproducible, ready-to-use microfluidic cell culture chips for OOC studies. Single-channel polydimethylsiloxane microfluidic chips were coated with the bioinspired catecholamine polymers, polydopamine (PDA) and polynorepinephrine (PNE), using a flow-based coating technique. The functionality of the resulting microfluidic chips was evaluated by extensive surface characterizations, at 130 °C, in the presence of various cleaning and culture media in static and flow conditions regularly used in OOCs and tested for shelf life by storing the coated microfluidic chips for 4 months at room temperature. Microfluidic chips coated with polycatecholamine were then seeded with the mouse cancer cell line Cath.a.differentiated (CAD) and with the normal human cerebral microvascular endothelial cell line human cerebral microvascular endothelial cells (hCMEC)/D3. Cell viability, cell phenotype, and cell functionality were assessed to evaluate the performance of both the coatings and the surface treatment technique. Both PDA- and PNE-coated microfluidic chips maintained high viability, phenotype, and functionality of CAD cells and hCMEC/D3 cells. In addition, CAD cells retained high viability when they were cultured in both the polymer-coated chips, which were stored at room temperature for up to 120 days. These results suggest that flow-based techniques to coat surfaces with polycatecholamines can be used to generate ready-to-use microfluidic OOC chips that offer long-term stability and reliability for the culture of cell types with application in pathophysiological studies and drug screening.

Ultrastable Lubricating Properties of Robust Self-Repairing Tribofilms Enabled by in Situ-Assembled Polydopamine Nanoparticles

Aqueous lubrication in nature is attracting increasing attention in the tribological fields for reducing friction energy consumption and improving anti-wear durability. Generally, adding nanolubricant additives is one of the most important strategies to effectively enhance the interface performance under boundary lubrication via the formation of a protective tribofilm on rubbing surfaces. However, the adsorbed tribofilms are unstable and are prone to failure during friction, and the interaction mechanism between the tribofilms and frictional interfaces is partly disclosed. In this study, inspired by mussels, an in situ-assembled polydopamine (PDA) tribofilm is achieved with PDA nanoparticles as aqueous lubricant additives, which shows excellent lubrication properties. The coefficient of friction is interface-independent and is reduced by as much as 83%. The results show that the PDA tribofilm can not only form chemical bonding with metal interfaces but also present a synergistic lubrication effect with the upper ceramic surface. Especially, a self-repairing effect of the PAD tribofilm is observed, by which the ultrastable lubricating properties can be achieved during friction, and thus, the friction and wear can be effectively controlled. This work provides an effective method for improving the interface stability of friction pairs under aqueous lubrication and also shows great meaning for industrial applications.

Dopamine enhances the mechanical and biological properties of enzyme-induced mineralized hydrogels

Enzyme-induced mineralization is an effective approach to improving the mechanical properties of acrylamide hydrogel and dopamine biofunctionalization can further significantly improve both the biological properties and the mechanical properties.

Immobilization of Antimicrobial Silver and Antioxidant Flavonoid as a Coating for Wound Dressing Materials

Purpose

The aim of this study is to develop a new coating for wound dressings that is comprised of antimicrobial silver (Ag) and antioxidant flavonoid quercetin (Q).

Methods

Dip-coating was used to apply the coating on cotton gauge as a model dressing. Ag was immobilised using polydopamine as a priming and catalytic layer followed by coating of quercetin that was incorporated in a functionalized polydimethylsiloxane. The coating was investigated using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and release assay. The antimicrobial activity of quercetin and Ag was tested against Staphylococcus aureus (S. aureus). A surgical wound model on mice was used to evaluate the effects of the coated dressing on wound healing rates and tissue histology.

Results

Ag and quercetin showed enhanced antimicrobial activity against S. aureus when used in combination. Ag and quercetin were successfully immobilized onto the fibre of the dressing using the dip-coating process. The coating released Ag and quercetin over 8 days and showed strong antioxidant activity. In the wound healing model, complete wound closure was achieved in 12 days in the group receiving coated dressing and was associated with an enhancement in tissue remodelling and neo-angiogenesis and the reduction in tissue inflammation.

Conclusion

These new antimicrobial-antioxidant coatings may be promising in the development of advanced wound care therapies.

Modulation of Cellular Colonization of Porous Polyurethane Scaffolds via the Control of Pore Interconnection Size and Nanoscale Surface Modifications

Full-scale cell penetration within porous scaffolds is required to obtain functional connective tissue components in tissue engineering applications. For this aim, we produced porous polyurethane structures with well-controlled pore and interconnection sizes. Although the influence of the pore size on cellular behavior is widely studied, we focused on the impact of the size of the interconnections on the colonization by NIH 3T3 fibroblasts and Wharton's jelly-derived mesenchymal stem cells (WJMSCs). To render the material hydrophilic and allow good material wettability, we treated the material either by plasma or by polydopamine (PDA) coating. We show that cells weakly adhere on these surfaces. Keeping the average pore diameter constant at 133 μm, we compare two structures, one with LARGE (52 μm) and one with SMALL (27 μm) interconnection diameters. DNA quantification and extracellular matrix (ECM) production reveal that larger interconnections is more suitable for cells to move across the scaffold and form a three-dimensional cellular network. We argue that LARGE interconnections favor cell communication between different pores, which then favors the production of the ECM. Moreover, PDA treatment shows a truly beneficial effect on fibroblast viability and on matrix production, whereas plasma treatment shows the same effect for WJMSCs. We, therefore, claim that both pore interconnection size and surface treatment play a significant role to improve the quality of integration of tissue engineering scaffolds.

Long-lasting bactericidal activity through selective physical puncture and controlled ions release of polydopamine and silver nanoparticles-loaded TiO2 nanorods in vitro and in vivo

Background: Titanium (Ti) implant-associated infection, which is mostly caused by bacterial adhesion and biofilm formation, may result in implant failure and secondary surgery. Thus it is an urgent issue to prevent bacterial infections at the earliest step.

Purpose: To develop a novel surface strategy of polydopamine (PDA) and silver (Ag) nanoparticle-loaded TiO₂ nanorods (NRDs) coatings on Ti alloy.

Materials and methods: Ag-TiO₂@PDA NRDs was fabricated on Ti alloy by hydrothermal synthesis. The antibacterial activity of Ag-TiO₂@PDA NRDs against Escherichia coli and methicillin-resistant Staphylococcus aureus were tested by FE-SEM, Live/Dead staining, zone of inhibition, bacteria counting method and protein leakage analysis in vitro. In addition, an implant infection model was conducted and the samples were tested by X-ray, Micro-CT and histological analysis in vivo. Besides, cell morphology and cytotoxicity of Mouse calvarial cells (MC3T3-E1) were characterized by FE-SEM, immunofluorescence and CCK-8 test in vitro.

Results: Our study successfully developed a new surface coating of Ag-TiO₂@PDA NRDs. The selective physical puncture of bacteria and controlled release of Ag+ ions of Ag-TiO₂@PDA NRDs achieved a long-lasting bactericidal ability and anti-biofilm activity with satisfied biocompatibility.

Conclusion: This strategy may be promising for clinical applications to reduce the occurrence of infection in the implant surgeries

Polydopamine-assisted surface modification for orthopaedic implants

Along with the massive use of implants in orthopaedic surgeries in recent few decades, there has been a tremendous demand for the surface modification of the implants to avoid surgery failure and improve their function. Polydopamine (PDA), being able to adhere to almost all kinds of substrates and possessing copious functional groups for covalently immobilizing biomolecules and anchoring metal ions, has been widely used for surface modification of materials since its discovery in the last decade. PDA and its derivatives can be used for the surface modification of orthopaedic implants to modulate cellular responses, including cell spreading, migration, proliferation, and differentiation, and may thereby enhance the function of existing implants. In addition, the osseointegration and antimicrobial properties of orthopaedic implants may also be improved by PDA-based coatings. The aim of this review is to provide a brief overview of current advances of surface modification technologies for orthopaedic implants using PDA and its derivatives as a medium. Given the versatility of PDA-based adhesion, such PDA-assisted surface modification technologies will certainly benefit the development of new orthopaedic implants.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

Surface treatments of orthopaedic implants, which are normally inert materials, are essential for their performance in vivo. This review summarizes recent advances in the surface modification of orthopaedic implants using facile and highly versatile techniques based on the use of polydopamine (PDA) and its derivatives.

Mussel-Inspired Polydopamine Coating: A General Strategy To Enhance Osteogenic Differentiation and Osseointegration for Diverse Implants

Surface modifications play an important role in endowing implant surface with excellent biocompatibility and bioactivity. Among the bioinspired surface modifications, the mussel-inspired polydopamine (PDA) has aroused great interest of researchers. Herein, we fabricated PDA on diverse implant surfaces, including biopolymer, biometal, and bioceramic. Then the effects of PDA coating on cell responsive behaviors in vitro and bone formation capacity in vivo were evaluated in detail. The results showed that PDA coating was fabricated on diverse samples surface successfully, which could significantly improve the hydrophilicity of different material surfaces. Furthermore, the results indicated that PDA coating exerted direct enhancing on the adhesion, proliferation and osteogenic differentiation of bone marrow derived mesenchymal stromal cells (BMSCs) through FAK and p38 signaling pathways. During the process, the focal adhesion protein expression and osteogenic-related genes expression level (e.g., ALP, BMP2, BSP, and OPN) were considerably upregulated. Most importantly, the in vivo study confirmed that PDA coating remarkably accelerated new bone formation and enhanced osseointegration performance. Our study uncovered the biological responses stimulated by PDA coating to make a better understanding of cell/tissue-PDA interactions and affirmed that PDA, a bioinspired polymer, has great potential as a candidate and functional bioactive coating medium in bone regeneration and orthopedic application.