Large amplitude Fourier transformed AC voltammetric investigation of the active state electrochemistry of a copper/aqueous base interface and implications for electrocatalysis

Ru-Cu Nanoheterostructures for Efficient Hydrogen Evolution Reaction in Alkaline Water Electrolyzers

Combining multiple species working in tandem for different hydrogen evolution reaction (HER) steps is an effective strategy to design HER electrocatalysts. Here, we engineered a hierarchical electrode for the HER composed of amorphous-TiO2/Cu nanorods (NRs) decorated with cost-effective Ru-Cu nanoheterostructures (Ru mass loading = 52 μg/cm2). Such an electrode exhibits a stable, over 250 h, low overpotential of 74 mV at -200 mA/cm2 for the HER in 1 M NaOH. The high activity of the electrode is attributed, by structural analysis, operando X-ray absorption spectroscopy, and first-principles simulations, to synergistic functionalities: (1) mechanically robust, vertically aligned Cu NRs with high electrical conductivity and porosity provide fast charge and gas transfer channels; (2) the Ru electronic structure, regulated by the size of Cu clusters at the surface, facilitates the water dissociation (Volmer step); (3) the Cu clusters grown atop Ru exhibit a close-to-zero Gibbs free energy of the hydrogen adsorption, promoting fast Heyrovsky/Tafel steps. An alkaline electrolyzer (AEL) coupling the proposed cathode and a stainless-steel anode can stably operate in both continuous (1 A/cm2 for over 200 h) and intermittent modes (accelerated stress tests). A techno-economic analysis predicts the minimal overall hydrogen production cost of US$2.12/kg in a 1 MW AEL plant of 30 year lifetime based on our AEL single cell, hitting the worldwide targets (US$2-2.5/kgH2).

Galvanic replacement of liquid metal Galinstan with copper for the formation of photocatalytically active nanomaterials

Galvanic replacement of liquid metal Galinstan under mechanical agitation with copper creates a multi-elemental system that is photocatalytically active for the degradation of organic dyes where reuseability is achieved via immobilisation on a solid support.

Galvanic Replacement of Electrochemically Restructured Copper Electrodes with Gold and Its Electrocatalytic Activity for Nitrate Ion Reduction

The electrochemical formation of nanostructured materials is a cost effective route to creating substrates that can be employed in a variety of applications. In this work the surface of a copper electrode was electrochemically restructured in an alkaline solution containing ethanol as an additive to modify the surface morphology, and generate a Cu/Cu₂O surface, which is known to be active for the electrocatalytic reduction of environmentally harmful nitrate ions. To increase the activity of the nanostructured surface it was decorated with gold prisms through a facile galvanic replacement approach to create an active Cu/Cu₂O/Au layer. The surface was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, as well as electrochemical techniques. It was found that the presence of recalcitrant oxides, and Au was beneficial for the increased activity compared to unmodified copper and undecorated restructured copper and was consistent with the incipient hydrous oxide adatom mediator model of electrocatalysis. This approach to generating nanostructured metal/metal oxide surfaces that can be galvanically replaced to create these types of composites may have other applications in the area of electrocatalysis.

In Situ Dynamic Nanostructuring of the Cu-Ti Catalyst-Support System Promotes Hydrogen Evolution under Alkaline Conditions

We report an interesting case of in situ dynamic nanostructuring of catalyst and support under hydrogen evolution conditions in basic media. When solution-grown CuO nanoplates on titanium substrates are subjected to hydrogen evolution reaction, besides the reduction of CuO to metallic Cu nanoplates, both catalyst and support simultaneously undergo a nanostructuring process. The process is driven by the dissolution-redeposition of Cu and the alkaline etching of the titanium support. The morphology of the resulting nanocomposite material consists of a porous matrix made of ultrasmall Cu nanocrystals and amorphous TiO _x nanoparticles. Interestingly, the nanostructuring of the catalyst can be finely controlled by varying the applied potential. Such a process leads to a 5.4-fold improvement in the catalyst activity, which is attributed not only to its large active surface area (formed upon nanostructuring), but also to an improved water dissociation activity, provided by the in situ formation of TiO _x nanoparticles. The final catalyst exhibits -10 mA/cm² of current density at a small overpotential of -108 mV and a long-term operational stability up to 50 h. Density functional theory calculations show that the co-presence of Cu and TiO₂ nanoparticles optimizes the free energy of hydrogen adsorption in the final catalyst. Our work highlights the importance of studying the dynamic evolution of catalysts under operational conditions and choice of proper support that enhances the catalyst activity.

Plasmon mediated Fe-O in an octahedral site of cuprospinel by Cu NPs for photocatalytic hydrogen evolution

Cu NPs (copper nanoparticles) were synthesized in situ on the surface of CuFe₂O₄ (cuprospinel). The enhancement of the separation efficiency of photogenerated e^-/h⁺ and the catalytic quantum efficiency showed that the LSPR (local surface plasmon resonance) of Cu NPs facilitated the photocatalytic reaction activity of CuFe₂O₄. And due to the fact that CuFe₂O₄ was constructed with Cu-O in the tetrahedral site and Fe-O in the octahedral site, the results of DTG and Raman spectra after HER (hydrogen evolution reaction) displayed that the phase change of Fe-O in the octahedral site of CuFe₂O₄ took place during the HER process, and along with the peak of Fe²⁺ in XPS spectra after HER, which indicated that light activated Fe-O in the octahedral site was responsible for the photocatalytic process.

Fourier transform large amplitude alternating current voltammetry investigations of the split wave phenomenon in electrocatalytic mechanisms

Fourier transform large amplitude alternating current voltammetry (FTACV) studies are reported on an electrocatalytic (EC') mechanistic system which exhibits split wave behavior on both macro- and micro-size working electrodes. The electrochemical characteristics of the EC' mechanism were analysed using the fundamental to fourth harmonic components deduced by the Fourier transform algorithm. The effects of the sinusoidal frequencies of the applied potential, electrode geometry and substrate concentrations are investigated. The split wave phenomenon was observed and explored particularly.

'Bubble-free' electrochemical delamination of CVD graphene films

The production of large amounts of hydrogen bubbles, typical of electrochemical delamination methods based on the electrolysis of water, results in mechanical damage to graphene during the delamination, transfer, and drying steps. Here a novel 'bubble-free' delamination method is introduced which exploits the electrochemical dissolution of native copper oxide at a potential lower than that required for the formation of hydrogen bubbles, enabling the production of defect-free graphene stack.

From single crystal surfaces to single atoms: investigating active sites in electrocatalysis

Electrocatalytic processes will undoubtedly be at the heart of energising future transportation and technology with the added importance of being able to create the necessary fuels required to do so in an environmentally friendly and cost effective manner. For this to be successful two almost mutually exclusive surface properties need to be reconciled, namely producing highly active/reactive surface sites that exhibit long term stability. This article reviews the various approaches which have been undertaken to study the elusive nature of these active sites on metal surfaces which are considered as adatoms or clusters of adatoms with low coordination number. This includes the pioneering studies at extended well defined stepped single crystal surfaces using cyclic voltammetry up to the highly sophisticated in situ electrochemical imaging techniques used to study chemically synthesised nanomaterials. By combining the information attained from single crystal surfaces, individual nanoparticles of defined size and shape, density functional theory calculations and new concepts such as mesoporous multimetallic thin films and single atom electrocatalysts new insights into the design and fabrication of materials with highly active but stable active sites can be achieved. The area of electrocatalysis is therefore not only a fascinating and exciting field in terms of realistic technological and economical benefits but also from the fundamental understanding that can be acquired by studying such an array of interesting materials.

Formation of nanostructured porous Cu-Au surfaces: the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu-Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu(2)O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu-Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Electromodulated Release of Nitric Oxide Through Polymer Material from Reservoir of Inorganic Nitrite Salt

Herein, we report a new approach to electromodulate the release of NO at physiological levels through polymeric materials from a stable nitrite electrolyte reservoir, with potential application in controlling biofilm formation and clotting on intravascular catheters. The NO flux can be turned 'on' and 'off' electrochemically, on demand.