Oligothiol graft-copolymer coatings stabilize gold nanoparticles against harsh experimental conditions

Increasing the Mechanical Stability of Polymer-Gold Interfacial Connection: A Parallel Covalent Strategy

Thiol-gold (S-Au) chemistry has been widely used in coating and functionalizing gold surfaces because it is robust and highly efficient. However, recent studies have shown that the S-Au-based self-assembled monolayers can lead to significant instability under external mechanical loading (e.g., in a swelled polymer film). Such instability limits further applications of S-Au chemistry-based functional materials. Here, we report a surface-modifying procedure based on a parallel covalent strategy. By employing dendritic macromolecules as a "middle layer" between the gold surface and polymer, the interfacial connecting strength increased by at least 350% as revealed by atomic force microscopy-based single molecule force spectroscopy (AFM-SMFS). The ultimate cleavage structure is confirmed to be an amide bond by control SMFS experiments, fluorescent microscopy, and dynamic force spectroscopy. This study/concept paves the way to prepare stable stimuli-responsive polymer brushes on solid surfaces and study mechanophores with high force stability.

Controlling the Surface Functionalization of Ultrasmall Gold Nanoparticles by Sequence-Defined Macromolecules

Ultrasmall gold nanoparticles (diameter about 2 nm) were surface-functionalized with cysteine-carrying precision macromolecules. These consisted of sequence-defined oligo(amidoamine)s (OAAs) with either two or six cysteine molecules for binding to the gold surface and either with or without a PEG chain (3400 Da). They were characterized by 1 H NMR spectroscopy, 1 H NMR diffusion-ordered spectroscopy (DOSY), small-angle X-ray scattering (SAXS), and high-resolution transmission electron microscopy. The number of precision macromolecules per nanoparticle was determined after fluorescent labeling by UV spectroscopy and also by quantitative 1 H NMR spectroscopy. Each nanoparticle carried between 40 and 100 OAA ligands, depending on the number of cysteine units per OAA. The footprint of each ligand was about 0.074 nm2 per cysteine molecule. OAAs are well suited to stabilize ultrasmall gold nanoparticles by selective surface conjugation and can be used to selectively cover their surface. The presence of the PEG chain considerably increased the hydrodynamic diameter of both dissolved macromolecules and macromolecule-conjugated gold nanoparticles.

The effect of functionalization on solubility and plasmonic features of gold nanoparticles

Effect of functionalization on stability, solubility, and plasmonic features of gold nanoparticle with the general formula of Au₁₈(SR)₁₄ in water solvent has been studied in this work. Thiol functional groups including 1,1-mercapto-ethyl alcohol, s-cysteamine, thioglycolic acid, and beta-mercaptoethanol have been used. Electronic band-gap, excitation energies, dipole moment, and hardness for all gold nanoparticles in water solvent were investigated using the quantum mechanical approach. Intermolecular forces, radial distribution function (RDF), mean square displacement (MSD), and solvation free energy were calculated by using simulation methods. Electronic band-gap, and excitation energy analysis show that surface modification of gold nanoparticles can change their electronic and plasmonic properties. The analysis of dipole moments indicates that ligands affect the nanoparticle's solubility. An increase of hardness and therefore chemical stability can be observed for functionalized nanoparticles compared to the bare structure. Intermolecular energies analyses suggest that structure with 1,1-mercapto ethyl alcohol ligand has the strongest interaction with the solvent. The analysis of RDF diagrams also indicates that the molecule with 1,1-mercapto ethyl alcohol ligand has the sharpest pick. The slope of the linear part of MSD diagrams that is the criterion of solute's lateral diffusion is the highest value for nanoparticle with 1,1-mercapto ethyl alcohol ligand. Furthermore, functionalization also affects solvation free energy contributions. According to obtained data of quantum mechanical calculations and molecular dynamics simulations, it may be concluded that particle with 1,1-mercapto ethyl alcohol is the best ligand for increasing solubility, stability, and plasmonic functions of Au₁₈(SR)₁₄ structures among the examined ones.

Thioether-Polyglycidol as Multivalent and Multifunctional Coating System for Gold Nanoparticles

Thiofunctional polymers are the established standard for the coating and biofunctionalization of gold nanoparticles (AuNPs). However, the nucleophilic and oxidative character of thiols provokes polymeric crosslinking and significantly limits the chemical possibilities to introduce biological functions. Thioethers represent a chemically more stable potential alternative to thiols that would offer easier functionalization, yet a few studies in the literature report inconclusive data regarding the efficacy of thioethers to stabilize AuNPs in comparison to thiols. A systematic comparison is presented of mono- versus multivalent thiol- and thioether-functional polymers, poly(ethylene glycol) versus side chain functional poly(glycidol) (PG) and it is shown that coating of AuNPs with multivalent thioether-functional PG leads to superior colloidal stability, even under physiological conditions and after freeze-drying and resuspension, as compared to thiol analogs at comparable polymer surface coverages. In addition, it is shown that a wide range of functional groups can be introduced in these polymers. Using diazirine functionalization as example, it is demonstrated that proteins can be covalently immobilized, and that conjugation of antibodies via this strategy enables efficient targeting and laser-irradiation induced killing of cells.

Thermally Stable Metallic Nanoparticles Prepared via Core-Cross-linked Block Copolymer Micellar Nanoreactors

Thermally stable metallic nanoparticles (MNPs) are highly desirable for the melt processing of polymer nanocomposites. However, due to the high surface energy penalty and decreased melting temperature, MNPs are easy to agglomerate and lose their unique properties if there is no protection or confinement layer. In this work, we report a facile and efficient way to synthesize thermally stable MNPs using core-cross-linked polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) reverse micelles as nanoreactors. From infrared results, gold, silver, and palladium ions exhibited distinctive coordination to the 4VP groups with varying chelation strengths. Compared to the non-cross-linked micelles, 1,4-dibromobutane (DBB)-cross-linking of the P4VP cores provided several advantages. First, it prevented severe swelling of the P4VP cores caused by the reducing agents and subsequent merger of swollen micelles. Second, the quaternized P4VP with hydrophilicity enhanced the uptake speed of precursor metal ions into the cores. Third, the cross-linked cores greatly stabilized the MNPs against the high-temperature environment (e.g., 110 °C for 40 h in toluene). In addition, the solubility of the reducing agents also played an important role. Anhydrous hydrazine could swell the P4VP cores and concentric core-shell particle morphology was obtained. On the contrary, triethylsilane could not swell the P4VP cores and thus eccentric core-shell particle morphology was observed. Only the concentric core-shell MNPs exhibited good thermal stability, whereas the eccentric core-shell MNPs did not. This work suggested that these thermally stable MNPs could be good candidates for the melt processing of functional polymer nanocomposites.

Preparation of water-soluble, PEGylated, mixed-dispersant quantum dots, with a preserved photoluminescence quantum yield

We present the preparation of PEGylated mixed dispersant QDs from water-soluble nanocrystals, relevant for biomedical applications and environmental monitoring. We mastered control over grafting densities and PEG-conformation while retaining PLQY.

Improvement of performance of a Au–Cu/AC catalyst using thiol for acetylene hydrochlorination reaction

Thiol could bond to the surface, mitigating the oxidation by HCl and protecting the active structure of Au NPs.

Resonance Rayleigh scattering method for determination of 2-mercaptobenzothiazole using gold nanoparticles probe

A sensitive, simple and novel method was developed to determine 2-mercaptobenzothiazole (2MBT) in water samples. This method was based on the interaction between gold nanoparticles (AuNPs) and 2MBT followed by increasing of the resonance Rayleigh scattering (RRS) intensity of nanoparticles. The change in RRS intensity (ΔIRRS) was linearly correlated to the concentration of 2MBT over the ranges of 5.0-100.0 and 100.0-300.0 μg L(-1). 2MBT can be measured in a short time (5 min) without any complicated or time-consuming sample pretreatment process. Parameters that affect the RRS intensities such as pH, concentration of AuNPs, standing time, electrolyte concentration, and coexisting substances were systematically investigated and optimized. Interference tests showed that the developed method has a very good selectivity and could be used conveniently for determination of 2MBT. The limit of detection (LOD) and limit of quantification (LOQ) were 1.0 and 3.0 μg L(-1), respectively. Relative standard deviations (RSD) for 20.0 and 80.0 μg L(-1) of 2MBT were 1.1 and 2.3, respectively. Possible mechanisms for the RRS changes of AuNPs in the presence of 2MBT were discussed and the method was successfully applied for the analysis of real water samples.

Formation and optical properties of fluorescent gold nanoparticles obtained by matrix sputtering method with volatile mercaptan molecules in the vacuum chamber and consideration of their structures

This paper proposes a novel methodology to synthesize highly fluorescent gold nanoparticles (NPs) with a maximum quantum yield of 16%, in the near-infrared (IR) region. This work discusses the results of using our (previously developed) matrix sputtering method to introduce mercaptan molecules, α-thioglycerol, inside the vacuum sputtering chamber, during the synthesis of metal NPs. The evaporation of α-thioglycerol inside the chamber enables to coordinate to the "nucleation stage" very small gold nanoclusters in the gas phase, thus retaining their photophysical characteristics. As observed through transmission electron microscopy, the size of the Au NPs obtained with the addition of α-thioglycerol varied from approximately 2-3 nm to approximately 5 nm. Plasmon absorption varied with the size of the resultant nanoparticles. Thus, plasmon absorption was observed at 2.4 eV in the larger NPs. However, it was not observed, and instead a new peak was found at approximately 3.4 eV, in the smaller NPs that resulted from the introduction of α-thioglycerol. The Au NPs stabilized by the α-thioglycerol fluoresced at approximately 1.8 eV, and the maximum wavelength shifted toward the red, in accordance with the size of the NPs. A maximum fluorescent quantum yield of 16% was realized under the optimum conditions, and this value is extremely high compared to values previously reported on gold NPs and clusters (generally ∼1%). To our knowledge, however, Au NPs of size >2 nm usually do not show strong fluorescence. By comparison with results reported in previous literature, it was concluded that these highly fluorescent Au NPs consist of gold-mercaptan complexes. The novel method presented in this paper therefore opens a new door for the effective control of size, photophysical characteristics, and structure of metal NPs. It is hoped that this research contributes significantly to the science in this field.

Strategies for interfacing inorganic nanocrystals with biological systems based on polymer-coating

A representative set of nanocrystals made of semiconductors, Au and iron oxide, surface-capped with polymer ligands presenting various metal-coordinating groups.

Thioctic acid derivatives as building blocks to incorporate DNA oligonucleotides onto gold nanoparticles

Oligonucleotide gold nanoparticle conjugates are being used as diagnostic tools and gene silencing experiments. Thiol-chemistry is mostly used to functionalize gold nanoparticles with oligonucleotides and to incorporate DNA or RNA molecules onto gold surfaces. However, the stability of such nucleic acid–gold nanoparticle conjugates in certain conditions may be a limitation due to premature break of the thiol-gold bonds followed by aggregation processes. Here, we describe a straightforward synthesis of oligonucleotides carrying thioctic acid moiety based on the use of several thioctic acid-l-threoninol derivatives containing different spacers, including triglycine, short polyethyleneglycol, or aliphatic spacers. The novel thioctic-oligonucleotides were used for the functionalization of gold nanoparticles and the surface coverage and stability of the resulting thioctic-oligonucleotide gold nanoparticles were assessed. In all cases gold nanoparticles functionalized with thioctic-oligonucleotides had higher loadings and higher stability in the presence of thiols than gold nanoparticles prepared with commercially available thiol-oligonucleotides. Furthermore, the thioctic derivative carrying the triglycine linker is sensitive to cathepsin B present in endosomes. In this way this derivative may be interesting for the cellular delivery of therapeutic oligonucleotides as these results provides the basis for a potential endosomal escape.