Quantum dots conjugated with Fe3O4-filled carbon nanotubes for cancer-targeted imaging and magnetically guided drug delivery

Synthesis and Characterization of Magnetic Nanoparticle-Decorated Multiwalled Carbon Nanotubes

Multiwalled carbon nanotubes find applications in many fields due to their extraordinary properties. However, depending on their synthesis method, they show no or a poor response to the presence of a magnetic field. This limits their usability in magnetic applications. In this study, the maximum induced magnetization of multiwalled carbon nanotubes was increased by deposition of magnetic nanoparticles, which were produced by nanosecond pulsed laser deposition under inert low-pressure conditions using iron (Fe), magnetite (Fe3O4), cobalt (Co), and nickel (Ni) targets. Extensive chemical and physical characterization of the added nanoparticles was performed. It was found that for the same synthesis conditions, Fe and Fe3O4 targets resulted in the formation of larger, asymmetrical magnetic Fe nanoparticles with a Fe3O4 shell (Fe@Fe3O4) (3.2-8.6 nm) and Fe3O4 (6.0-12.4 nm) nanoparticles, respectively. Smaller, more spherical Co@CoO (2.1-5.0 nm) and Ni@NiO (1.4-3.5 nm) nanoparticles were obtained from the Co and Ni targets, respectively. The highest increase in maximum induced magnetization was observed for multiwalled carbon nanotubes with Fe@Fe3O4 (5.37 ± 0.15 emu/g) or Co@CoO nanoparticles (4.29 ± 0.01) compared to pristine multiwalled carbon nanotubes (2.46 ± 0.08 emu/g) and nanotubes with Fe3O4 (3.79 ± 0.38 emu/g) or Ni@NiO nanoparticles (2.85 ± 0.06 emu/g). Finally, superior adhesion of the Fe@Fe3O4 and Fe3O4 nanoparticles to multiwalled carbon nanotubes compared to the Ni@NiO and Co@CoO nanoparticles was identified.

Advanced 1D heterostructures based on nanotube templates and molecules

Recent advancements in materials science have shed light on the potential of exploring hierarchical assemblies of molecules on surfaces, driven by both fundamental and applicative challenges. This field encompasses diverse areas including molecular storage, drug delivery, catalysis, and nanoscale chemical reactions. In this context, the utilization of nanotube templates (NTs) has emerged as promising platforms for achieving advanced one-dimensional (1D) molecular assemblies. NTs offer cylindrical, crystalline structures with high aspect ratios, capable of hosting molecules both externally and internally (Mol@NT). Furthermore, NTs possess a wide array of available diameters, providing tunability for tailored assembly. This review underscores recent breakthroughs in the field of Mol@NT. The first part focuses on the diverse panorama of structural properties in Mol@NT synthesized in the last decade. The advances in understanding encapsulation, adsorption, and ordering mechanisms are detailed. In a second part, the review highlights the physical interactions and photophysics properties of Mol@NT obtained by the confinement of molecules and nanotubes in the van der Waals distance regime. The last part of the review describes potential applicative fields of these 1D heterostructures, providing specific examples in photovoltaics, luminescent materials, and bio-imaging. A conclusion gathers current challenges and perspectives of the field to foster discussion in related communities.

Pathophysiological aspects of transferrin-A potential nano-based drug delivery signaling molecule in therapeutic target for varied diseases

Transferrin (Tf), widely known for its role as an iron-binding protein, exemplifies multitasking in biological processes. The role of Tf in iron metabolism involves both the uptake of iron from Tf by various cells, as well as the endocytosis mediated by the complex of Tf and the transferrin receptor (TfR). The direct conjugation of the therapeutic compound and immunotoxin studies using Tf peptide or anti-Tf receptor antibodies as targeting moieties aims to prolong drug circulation time and augment efficient cellular drug uptake, diminish systemic toxicity, traverse the blood-brain barrier, restrict systemic exposure, overcome multidrug resistance, and enhance therapeutic efficacy with disease specificity. This review primarily discusses the various biological actions of Tf, as well as the development of Tf-targeted nano-based drug delivery systems. The goal is to establish the use of Tf as a disease-targeting component, accentuating the potential therapeutic applications of this protein.

Progress in quantum dot-based biosensors for microRNA assay: A review

MicroRNAs (miRNAs) are responsible for post-transcriptional gene regulation, and may function as valuable biomarkers for diseases diagnosis. Accurate and sensitive analysis of miRNAs is in great demand. Quantum dots (QDs) are semiconductor nanomaterials with superior optoelectronic features, such as high quantum yield and brightness, broad absorption and narrow emission, long fluorescence lifetime, and good photostability. Herein, we give a comprehensive review about QD-based biosensors for miRNA assay. Different QD-based biosensors for miRNA assay are classified by the signal types including fluorescent, electrochemical, electrochemiluminescent, and photoelectrochemical outputs. We highlight the features, principles, and performances of the emerging miRNA biosensors, and emphasize the challenges and perspectives in this field.

Computational approaches to delivery of anticancer drugs with multidimensional nanomaterials

Functionalized nanotubes (NTs), nanosheets, nanorods, and porous organometallic scaffolds are potential in vivo carriers for cancer therapeutics. Precise delivery through these agents depends on factors like hydrophobicity, payload capacity, bulk/surface adsorption, orientation of molecules inside the host matrix, bonding, and nonbonding interactions. Herein, we summarize advances in simulation techniques, which are extremely valuable in initial geometry optimization and evaluation of the loading and unloading behavior of encapsulated drug molecules. Computational methods broadly involve the use of quantum and classical mechanics for studying the behavior of molecular properties. Combining theoretical processes with experimental techniques, such as X-ray crystallography, NMR spectroscopy, and bioassays, can provide a more comprehensive understanding of the structure and function of biological molecules. This integrated approach has led to numerous breakthroughs in drug discovery, enzyme design, and the study of complex biological processes. This short review provides an overview of results and challenges described from erstwhile investigations on the molecular interaction of anticancer drugs with nanocarriers of different aspect ratios.

Development of Magnetic Lateral Flow and Direct Competitive Immunoassays for Sensitive and Specific Detection of Halosulfuron-Methyl Using a Novel Hapten and Monoclonal Antibody

Halosulfuron-methyl (HM) is widely used for the removal of noxious weeds in corn, sugarcane, wheat, rice, and tomato fields. Despite its high efficiency and low toxicity, drift to nontarget crops and leaching of its metabolites to groundwater pose potential risks. Considering the instability of HM, the pyrazole sulfonamide of HM was used to generate a hapten and antigen to raise a high-quality monoclonal antibody (Mab, designated 1A91H11) against HM. A direct competitive immunoassay (dcELISA) using Mab 1A91H11 achieved a half-maximal inhibitory concentration (IC50) of 1.5 × 10^-3 mg/kg and a linear range of 0.7 × 10^-3 mg/kg-10.7 × 10^-3 mg/kg, which was 10 times more sensitive than a comparable indirect competitive ELISA (icELISA) and more simple to operate. A spiking recovery experiment performed in tomato and maize matrices with 0.01, 0.05, and 0.1 mg/kg HM had average recoveries within 78.9-87.9% and 103.0-107.4% and coefficients of variation from 1.1-6.8% and 2.7-6.4% in tomato and maize, respectively. In addition, a magnetic lateral flow immunoassay (MLFIA) was developed for quantitative detection of low concentrations of HM in paddy water. Compared with dcELISA, the MLFIA exhibited 3.3- to 50-fold higher sensitivity (IC50 0.21 × 10^-3 mg/kg). The average recovery and RSD of the developed MLFIA ranged from 81.5 to 92.5% and 5.4 to 9.7%. The results of this study demonstrated that the developed dcELISA and MLFIA are suitable for rapid detection of HM residues in tomato and maize matrices and paddy water, respectively, with acceptable accuracy and precision.

Multifunctional Carbon-Based Nanoparticles: Theranostic Applications in Cancer Therapy and Diagnosis

Cancer diagnosis and treatment are the most critical challenges in modern medicine. Conventional cancer treatments no longer meet the needs of the health field due to the high rate of mutations and epigenetic factors that have caused drug resistance in tumor cells. Hence, the search for unique methods and factors is quickly expanding. The development of nanotechnology in medicine and the search for a system to integrate treatment and diagnosis to achieve an effective approach to overcome the known limitations of conventional treatment methods have led to the emergence of theranostic nanoparticles and nanosystems based on these nanoparticles. An influential group of these nanoparticles is carbon-based theranostic nanoparticles. These nanoparticles have received significant attention due to their unique properties, such as electrical conductivity, high strength, excellent surface chemistry, and wide range of structural diversity (graphene, nanodiamond, carbon quantum dots, fullerenes, carbon nanotubes, and carbon nanohorns). These nanoparticles were widely used in various fields, such as tissue engineering, drug delivery, imaging, and biosensors. In this review, we discuss in detail the recent features and advances in carbon-based theranostic nanoparticles and the advanced and diverse strategies used to treat diseases with these nanoparticles.

A Review of Advanced Multifunctional Magnetic Nanostructures for Cancer Diagnosis and Therapy Integrated into an Artificial Intelligence Approach

The new era of nanomedicine offers significant opportunities for cancer diagnostics and treatment. Magnetic nanoplatforms could be highly effective tools for cancer diagnosis and treatment in the future. Due to their tunable morphologies and superior properties, multifunctional magnetic nanomaterials and their hybrid nanostructures can be designed as specific carriers of drugs, imaging agents, and magnetic theranostics. Multifunctional magnetic nanostructures are promising theranostic agents due to their ability to diagnose and combine therapies. This review provides a comprehensive overview of the development of advanced multifunctional magnetic nanostructures combining magnetic and optical properties, providing photoresponsive magnetic platforms for promising medical applications. Moreover, this review discusses various innovative developments using multifunctional magnetic nanostructures, including drug delivery, cancer treatment, tumor-specific ligands that deliver chemotherapeutics or hormonal agents, magnetic resonance imaging, and tissue engineering. Additionally, artificial intelligence (AI) can be used to optimize material properties in cancer diagnosis and treatment, based on predicted interactions with drugs, cell membranes, vasculature, biological fluid, and the immune system to enhance the effectiveness of therapeutic agents. Furthermore, this review provides an overview of AI approaches used to assess the practical utility of multifunctional magnetic nanostructures for cancer diagnosis and treatment. Finally, the review presents the current knowledge and perspectives on hybrid magnetic systems as cancer treatment tools with AI models.

In Vitro Study: Synthesis and Evaluation of Fe3O4/CQD Magnetic/Fluorescent Nanocomposites for Targeted Drug Delivery, MRI, and Cancer Cell Labeling Applications

In the present study, first, Fe₃O₄ nanoparticles were functionalized using glutaric acid and then composited with CQDs. Doxorubicin (DOX) drug was loaded to evaluate the performance of the nanocomposite for targeted drug delivery applications. The XRD pattern confirmed the presence of characteristic peaks of CQDs and Fe₃O₄. In the FTIR spectrum, the presence of carboxyl functional groups on Fe₃O₄/CQDs was observed; DOX (positive charge) is loaded onto Fe₃O₄/CQDs (negative charge) by electrostatic absorption. FESEM and AFM images showed that the particle sizes of Fe₃O₄ and CQDs were 23-75 and 1-3 nm, respectively. The hysteresis curves showed superparamagnetic properties for Fe₃O₄ and Fe₃O₄/CQDs (57.3 and 8.4 emu/g). The Fe₃O₄ hysteresis curve showed superparamagnetic properties (Ms and Mr: 57.3 emu/g and 1.46 emu/g. The loading efficiency and capacity for Fe₃O₄/CQDs were 93.90% and 37.2 mg DOX/g MNP, respectively. DOX release from Fe₃O₄/CQDs in PBS showed pH-dependent release behavior where after 70 h at pH 5 and 7.4, about 50 and 21% of DOX were released. Fluorescence images of Fe₃O₄/CQD-treated cells showed that Fe₃O₄/CQDs are capable of labeling MCF-7 and HFF cells. Also, T₂-weighted MRI scans of Fe₃O₄/CQDs in water exhibited high r₂ relaxivity (86.56 mM^-1 S^-1). MTT assay showed that DOX-loaded Fe₃O₄/CQDs are highly biocompatible in contact with HFF cells (viability = 95%), but they kill MCF-7 cancer cells (viability = 45%). Therefore, the synthesized nanocomposite can be used in MRI, targeted drug delivery, and cell labeling.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

Advanced Nano-Carriers for Anti-Tumor Drug Loading

Chemotherapy is one of the important means of tumor therapy. However, most of the anti-tumor drugs that currently used in clinic are hydrophobic non-specific drugs, which seriously affect the efficacy of drugs. With the development of nanotechnology, drug efficacy can be improved by selecting appropriate biodegradable nanocarriers for achieving the controlled release, targeting and higher bioavailability of drugs. This paper reviewed the research progress of anti-tumor drug nanoparticle carriers, which mainly summarized the materials used for anti-tumor drug nanoparticle carriers and their effects in anti-tumor drugs, as well as the targeted drug delivery methods of anti-tumor drugs based on nanocarriers.

Synthesis and characterization of hybrid nanocarrier layered double hydroxide grafted by polyethylene glycol and gemcitabine

For the past few years, organic-inorganic hybrid nanocarriers have been widely explored for effective drug delivery and preferable disease treatments. In this article, hydrothermal method was utilized to prepare fine dispersed layered double hydroxide (Mg-Al LDH) suspension. Polyethylene glycol (PEG) was grafted on the surface of LDH lamella in order to improve the dispersibility of LDH. Besides, the anti-cancer drug gemcitabine was grafted on the surface of LDH lamellas through chemical grafting. Hence a novel new type of organic-inorganic hybrid drug delivery system LDH-mPEG-Gemcitabine was obtained. In addition, the siRNA was intercalated into the LDH interlamination by ion exchange method to realize drug and gene co-delivery. The loading capacity of LDH and LDH-mPEG-Gemcitabine was evaluated by agarose gel electrophoresis. The characterization by laser particle size analyzer, TEM, FT-IR, XRD, in vitro cell viability and in vitro drug release demonstrated that LDH-mPEG-Gemcitabine possessed fine dispersibility, uniform morphology and particle size, fine biocompatibility, ideal drug loading and releasing capacity and held great potential to be used as a desired co-delivery system for drug and gene.

Pharmaceutical Applications of Quantum Dots

Nanotechnology has been utilized in developing novel drug formulations with minimal adverse effects. Nanoparticles in a lower size range with great surface area, increased potency, and easy permeability could be an approach for the treatment of cancer and other diseases. Unlike other nanoparticles, quantum dots have specific functional groups, have charges over their surface, and are extremely small in size (2-10nm), which makes them more permeable through tight junctions. Quantum dots are interesting materials that offer diagnosis and treatment concurrently. Quantum dots are reported to have several applications in pharmaceuticals as well as drug delivery, diagnosis, immunolabeling, and cell labeling tools. However, the existence of heavy metals in quantum dots such as cadmium poses a potential challenge for future medical applications, where quantum dots may be deliberately injected into the body. In this review, we are focusing on various pharmaceutical applications of quantum dots. Graphical Abstract.

COOH-Terminated Silicon Quantum Dots as a Highly Efficient Drug Nanocarrier for Targeted Tumor Cell Imaging

Fluorescent silicon quantum dots (SiQDs) characterized by exceptional photostability and colloidal robustness as well as beneficial biocompatibility are fast becoming new pharmaceutical nanocarriers. With a view to efficiently loading cisplatin (CDDP) onto SiQDs, carboxylate group (COOH) terminated SiQDs were imperative because of chelate formation with CDDP. In this work, we employed a facial microwave irradiation route for rapidly synthesizing high-quality COOH-SiQDs through the use of 3-aminopropyl trimethoxy silane (APTMS) molecules to fulfil the role of silicon precursor and maleic acid (MA) as the agent for facilitating reduction. The SiQDs showed blue fluorescence with an associated photoluminescence quantum yield (PLQY) of 40.2%, the size of which was small at 3.2 ±0.6 nm, and long-lasting stability (an extensive range in pH (4-12) and concentrations of electrolytes reaching 3 Molarity of a solution of sodium chloride). As nanocarriers, carboxylic acids chelation generated a high loading of CDDP onto SiQDs (drug loading capacity, DLC up to 32.2% at pH = 9) and a drug release of CDDP up to 57.6% at pH = 5. Furthermore, the MTT assays demonstrated the non or low cytotoxicity of SiQDs and the role of the controlled release of SiQD-CDDP Finally, the prepared SiQD-CDDP were used for cell imaging, and further targeted labeling of some tumors after folic acid (FA) conjugation. These characteristics allow for the deployment of SiQDs as a highly efficient nanocarrier that facilitate the delivery of clinical drugs for the future.

Progress and prospects of magnetic iron oxide nanoparticles in biomedical applications: A review

Nanoscience has been considered as one of the most substantial research in modern science. The utilization of nanoparticle (NP) materials provides numerous advantages in biomedical applications due to their unique properties. Among various types of nanoparticles, the magnetic nanoparticles (MNPs) of iron oxide possess intrinsic features, which have been efficiently exploited for biomedical purposes including drug delivery, magnetic resonance imaging, Magnetic-activated cell sorting, nanobiosensors, hyperthermia, and tissue engineering and regenerative medicine. The size and shape of nanostructures are the main factors affecting the physicochemical features of superparamagnetic iron oxide nanoparticles, which play an important role in the improvement of MNP properties, and can be controlled by appropriate synthesis strategies. On the other hand, the proper modification and functionalization of the surface of iron oxide nanoparticles have significant effects on the improvement of physicochemical and mechanical features, biocompatibility, stability, and surface activity of MNPs. This review focuses on popular methods of fabrication, beneficial surface coatings with regard to the main required features for their biomedical use, as well as new applications.

Chitosan overlaid Fe3O4/rGO nanocomposite for targeted drug delivery, imaging, and biomedical applications

A hybrid and straightforward nanosystem that can be used simultaneously for cancer-targeted fluorescence imaging and targeted drug delivery in vitro was reported in this study. A chitosan (CS) polymer coated with reduced graphene oxide (rGO) and implanted with Fe3O4 nanoparticles was fabricated. The fundamental physicochemical properties were confirmed via FT-IR, XRD, FE-SEM, HR-TEM, XPS, and VSM analysis. The in vivo toxicity study in zebrafish showed that the nanocomposite was not toxic. The in vitro drug loading amount was 0.448 mg/mL-1 for doxorubicin, an anticancer therapeutic, in the rGO/Fe3O4/CS nanocomposite. Furthermore, the pH-regulated release was observed using folic acid. Cellular uptake and multimodal imaging revealed the benefit of the folic acid-conjugated nanocomposite as a drug carrier, which remarkably improves the doxorubicin accumulation inside the cancer cells over-express folate receptors. The rGO/Fe3O4/CS nanocomposite showed enhanced antibiofilm and antioxidant properties compared to other materials. This study's outcomes support the use of the nanocomposite in targeted chemotherapy and the potential applications in the polymer, cosmetic, biomedical, and food industries.

Targeting strategies for superparamagnetic iron oxide nanoparticles in cancer therapy

Among various nanoparticles, superparamagnetic iron oxide nanoparticles (SPIONs) have been increasingly studied for their excellent superparamagnetism, magnetic heating properties, and enhanced magnetic resonance imaging (MRI). The conjugation of SPIONs with drugs to obtain delivery nanosystems has several advantages including magnetic targeted functionalization, in vivo imaging, magnetic thermotherapy, and combined delivery of anticancer agents. To further increase the targeting efficiency of drugs through a delivery nanosystem based on SPIONs, additional targeting moieties including transferrin, antibodies, aptamers, hyaluronic acid, folate, and targeting peptides are coated onto the surface of SPIONs. Therefore, this review summarizes the latest progresses in the conjugation of targeting molecules and drug delivery nanosystems based on SPIONs, especially focusing on their performances to develop efficient targeted drug delivery systems for tumor therapy. STATEMENT OF SIGNIFICANCE: Some magnetic nanoparticle-based nanocarriers loaded with drugs were evaluated in patients and did not produce convincing results, leading to termination of clinical development in phase II/III. An alternative strategy for drug delivery systems based on SPIONs is the conjugation of these systems with targeting segments such as transferrin, antibodies, aptamers, hyaluronic acid, folate, and targeting peptides. These targeting moieties can be recognized by specific integrin/receptors that are overexpressed specifically on the tumor cell surface, resulting in minimizing dosage and reducing off-target effects. This review focuses on magnetic nanoparticle-based nonviral drug delivery systems with targeting moieties to deliver anticancer drugs, with an aim to provide suggestions on the development of SPIONs through discussion.

A Review of Theranostics Applications and Toxicities of Carbon Nanomaterials

BACKGROUND

In the last few years, the use of modified Carbon Nanomaterials (CNMs) for theranostics (therapeutic and diagnosis) applications is a new and rapidly growing area in pharmacy and medical fields. Owing to this, their specific physicochemical behaviors like high stability, drug loading, surface area to volume ratio, with low toxicity and immunogenicity are mainly responsible to be considered those as smart nanomaterials.

OBJECTIVES

This review describes the different dimensions of carbon-based nanocarriers including 0-D fullerene, 1-D Carbon Nanotubes (CNTs), and 2-D graphene and Graphene Oxide (GO) and their surface modification with different biocompatible and biodegradable molecules via covalent or non-covalent functionalization. The major focus of this article is on the different theranostics applications of CNMs like targeted drugs and genes delivery, photodynamic therapy, photothermal therapy, bioimaging, and biosensing. The therapeutic efficacy of drugs could be enhanced by delivering them directly on a specific site using different targeted ligands such as vitamins, peptide, carbohydrates, proteins, etc. A section of the article also discusses the toxicity of the CNMs to the living systems.

CONCLUSIONS

In brief, this review article discusses the numerous theranostics applications and toxicities of CNMs.

Properties and bioeffects of magneto–near infrared nanoparticles on cancer diagnosis and treatment

The developed nanosystem could be an effective cancer drug deliverer, MRI contrast enhancer and near infrared fluorescent probe.

Quantum dots from microfluidics for nanomedical application

Nanomedicine, with its advantages of rapid diagnosis, high sensitivity and high accuracy, has aroused extensive interest of researchers, as the cornerstone of nanomedicine, nanomaterials achieve extra attention and rapid development. Among nanomaterials, quantum dots stand out due to their long fluorescence lifetime and excellent antiphotobleaching performance. At present, quantum dots have been applied to the diagnosis and treatment of diseases and various strategies have been presented to fabricate quantum dots. Microfluidic is one promising strategy since microfluidic device can provide an effective platform for the diagnosis of trace disease markers. In this paper, research progress in the microfluidic synthesis of quantum dots and quantum dot-based nanomedical application is discussed. The classification of quantum dots is firstly introduced, and the researches on quantum dots synthesis based on microfluidic is then mainly described, including the sort, design, preparation of microfluidic synthesis device and its application in synthesis. Nanomedical applications of the quantum dots is especially described and emphasized. The prospects for future development of quantum dots from microfluidic for nanomedical application are finally presented. This article is categorized under: Diagnostic Tools > in vitro Nanoparticle-Based Sensing.

Chemical Synthesis and Characterization of Poly(poly(ethylene glycol) methacrylate)-Grafted CdTe Nanocrystals via RAFT Polymerization for Covalent Immobilization of Adenosine

This paper describes the functionalization of poly(poly(ethylene glycol) methacrylate) (PPEGMA)-grafted CdTe (PPEGMA-g-CdTe) quantum dots (QDs) via surface-initiated reversible addition–fragmentation chain transfer (SI-RAFT) polymerization for immobilization of adenosine. Initially, the hydroxyl-coated CdTe QDs, synthesized using 2-mercaptoethanol (ME) as a capping agent, were coupled with a RAFT agent, S-benzyl S′-trimethoxysilylpropyltrithiocarbonate (BTPT), through a condensation reaction. Then, 2,2′-azobisisobutyronitrile (AIBN) was used to successfully initiate in situ RAFT polymerization to generate PPEGMA-g-CdTe nanocomposites. Adenosine-above-PPEGMA-grafted CdTe (Ado-i-PPEGMA-g-CdTe) hybrids were formed by the polymer shell, which had successfully undergone bioconjugation and postfunctionalization by adenosine (as a nucleoside). Fourier transform infrared (FT-IR) spectrophotometry, energy-dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy results indicated that a robust covalent bond was created between the organic PPEGMA part, cadmium telluride (CdTe) QDs, and the adenosine conjugate. The optical properties of the PPEGMA-g-CdTe and Ado-i-PPEGMA-g-CdTe hybrids were investigated by photoluminescence (PL) spectroscopy, and the results suggest that they have a great potential for application as optimal materials in biomedicine.

Surface Modification of Magnetic Iron Oxide Nanoparticles

Functionalized iron oxide nanoparticles (IONPs) are of great interest due to wide range applications, especially in nanomedicine. However, they face challenges preventing their further applications such as rapid agglomeration, oxidation, etc. Appropriate surface modification of IONPs can conquer these barriers with improved physicochemical properties. This review summarizes recent advances in the surface modification of IONPs with small organic molecules, polymers and inorganic materials. The preparation methods, mechanisms and applications of surface-modified IONPs with different materials are discussed. Finally, the technical barriers of IONPs and their limitations in practical applications are pointed out, and the development trends and prospects are discussed.

Triple function nanocomposites of porous silica-CoFe2O4-MWCNTs as a carrier for pH-sensitive anti-cancer drug controlled delivery

Cobalt ferrite nanoparticles loaded on multiwalled carbon nanotube (MWCNT) magnetic hybrids have been demonstrated to be promising magnetic resonance imaging contrast agents and drug carriers. However, the hydrophobic, less biocompatible characteristics and low loading capacity for the drug hamper their wide biological applications. To solve the above problem, an alternative strategy is to coat the MWCNTs@CoFe₂O₄ nanoparticles with a mesoporous silica (mSiO₂) shell. Herein, the reasonable fabrication process results in successful coating mSiO₂ on the as-obtained MWCNTs@CoFe₂O₄ nanoparticles, forming well-defined core-shell-structured MWCNTs@CoFe₂O₄@mSiO₂ nanocomposites. The as-synthesized mesoporous nanocarrier possesses a high surface area and large pore volume for the loading of the drug, and has a superparamagnetic feature for drug targeting. Moreover, the anticancer drug doxorubicin (DOX)-loaded MWCNTs@CoFe₂O₄@mSiO₂ nanoplatforms show an excellent pH-responsive drug release character within 48 h. Therefore, a novel nanocarrier based on MWCNTs@CoFe₂O₄@mSiO₂ was proposed, and its potential application for targeted cancer therapy was highlighted.

Synthesis and characterization of a flexible fluorescent magnetic Fe3O4@SiO2/CdTe-NH2 nanoprobe

In this study, we designed and synthesized two novel fluorescent magnetic nanoparticles. Fe₃O₄@SiO₂-NH-GSH-CdTe (FSGC) (GSH = glutathione) nanoparticles were synthesized using amino-functionalized Fe₃O₄@SiO₂ nanoparticles and GSH-stabilized CdTe quantum dots (CdTe QDs), while flexible Fe₃O₄@SiO₂-NH-GSH-CdTe-NH-NH₂ (FSGCN) nanoparticles were synthesized using the FSGC precursor and 1,6-hexamethylenediamine. These two kinds of nanoprobes exhibited excellent magnetic and fluorescent properties. By comparing the fluorescence quenching effect of folic acid (FA) on FSGC and FSGCN, we found that the quenching effect of FA on FSGC was acute and the process was too fast to determine the FA content. However, the quenching effect of FA on flexible FSGCN was mild and hence it could be used as a nanoprobe to determine FA concentration. At physiological pH, the fluorescence quenching effect of FA on the FSGCN nanoprobes was fitted according to the Stern-Volmer equation with a linear response in the concentration range of 0.14 to 4.20 μg mL^-1 with a detection limit of 15.1 × 10^-9 g mL^-1 (S/N = 3) under optimized experimental conditions. The proposed flexible nanoprobe was successfully used to determine the content of FA in folic acid tablets. Recovery was found to be in the range of 92.7%-105.6% with a relative standard deviation of 1.12%-3.84%. Owing to their good stability, environment-friendly characteristics, high selectivity, and good optical properties and biocompatibility, these nanoprobes have potential for usage in practical applications.

Multifunctional GQDs-Concanavalin A@Fe3O4 nanocomposites for cancer cells detection and targeted drug delivery

Multifunctional nanocomposites containing intrinsic property for serving as the sensing elements as well as targeted nanoconjugates are highly preferred in various therapeutic applications. In this work, nanocomposites of graphene quantum dots (GQDs) and Fe₃O₄ with conjugation of lectin protein, concanavalin A, to form GQD-ConA@Fe₃O₄ nanocomposites are developed for both detection of cancer cell and release of drugs to HeLa cells. The GQD-ConA@Fe₃O₄ nanocomposites deposited on Pt electrode can detect cancerous HeLa cells over normal endothelial cells with a dynamic linear range of 5 × 10² to 1 × 10⁵ cells mL^-1 with a detection limit of 273 cell mL^-1. The GQD-ConA@Fe₃O₄ also can serve as nanocarriers for loading and delivering doxorubicin (Dox). The in vitro cell images show that the Dox concentration in HeLa cells is enhanced more than double in the presence of external magnetic field due to the incorporation of Fe₃O₄ in the nanocarrier. The cytotoxicity assay indicates that the susceptibility of cancerous HeLa cells to Dox is 13% higher than that of normal cells, confirming the selective role of ConA in nanocarriers. Results clearly indicate the GQD-ConA@Fe₃O₄ nanocomposites as a promising material for cancer cell detection and targeted Dox release toward HeLa cells which can serve as the multifunctional platform for novel cancer cell diagnostic and therapeutic applications.

HSA loaded with CoFe2 O4 /MNPs as a high‐efficiency carrier for epirubicin anticancer drug delivery

Drug delivery is one of the most important challenges in the domain of health. Non‐toxic and biocompatible carriers are provided by human serum albumin nano‐capsule (HSA/NC) for drug delivery applications. In this study, HSA, with high loadings of drug‐modified cobalt ferrite (CoFe2 O4) magnetic nanoparticle (CoFe2 O4 /MNPs) was fabricated for epirubicin anticancer drug delivery. In the initial step, CoFe2 O4 /MNPs was synthesised via co‐precipitation technique and characterised by X‐ray powder diffraction, vibrating sample magnetometry, energy dispersive X‐ray analysis, scanning electron microscopy and map analysis. Furthermore, CoFe2 O4 /MNPs and epirubicin were loaded into HSA/NC and utilised as a novel system against breast cancer cell line (MCF‐7). IC50 for free epirubicin, unloaded CoFe2 O4 /MNPs/HSA/NC, CoFe2 O4 /MNPs and epirubicin‐loaded CoFe2 O4 /MNPs/HSA/NC were 7.7, 2400, 840 and 430 μg/ml, respectively. The results obtained revealed high cytotoxicity effect of epirubicin‐loaded CoFe2 O4 /MNPs on breast cancer cell line.

Remediation and cytotoxicity study of polycyclic aromatic hydrocarbon-contaminated marine sediments using synthesized iron oxide-carbon composite

The study developed a new and cost-effective method for the remediation of marine sediments contaminated with polycyclic aromatic hydrocarbons (PAHs). Iron oxide (Fe₃O₄) nanoparticles were synthesized as the active component, supported on carbon black (CB), to form a composite catalyst (Fe₃O₄-CB) by using a wet chemical method. The oxidation of 16 PAH contaminants present in marine sediments significantly activated sodium persulfate (Na₂S₂O₈) to form sulfate free radicals (SO₄^-·); this was investigated in a slurry system. In addition, in vitro cytotoxic activity and oxidative stress studies were performed. The synthesized composite catalysts (Fe₃O₄-CB) were characterized using X-ray diffraction, Fourier transform infrared spectroscopy, a superconducting quantum interference device magnetometry, and environmental scanning electron microscopy. The efficiency of PAH removal was 39-63% for unactivated persulfate (PS) from an initial dose of 1.7 × 10^-7-1.7 × 10^-2 M. The removal of PAHs was evaluated using Fe₃O₄/PS, CB/PS, and Fe₃O₄/PS and found to be 75, 64, and 86%, respectively, at a temperature of 303 K, PS concentration of 1.7 × 10^-5 M, and pH of 6.0. An MTT assay was used to assess the cytotoxicity of the composite catalyst at five concentrations (25, 50, 100, 200, and 400 μg/mL) on human hepatoma carcinoma (HepG2) cells for 24 h. This revealed a dose-dependent decrease in cell viability. A dichlorofluorescein diacetate assay was performed to evaluate the generation of reactive oxygen species, which principally originated from the ferrous ions of the composite catalyst.

Magnetofluorescent nanocomposites and quantum dots used for optimal application in magnetic fluorescence-linked immunoassay

Magnetofluorescent nanocomposites with optimal magnetic and fluorescent properties were prepared and characterized by combining magnetic nanoparticles (iron oxide@polymethyl methacrylate) with fluorescent nanoparticles (rhodamine 6G@mSiO₂). Experimental parameters were optimized to produce nanocomposites with high magnetic susceptibility and fluorescence intensity. The detection of a model biomarker (alpha-fetoprotein) was used to demonstrate the feasibility of applying the magnetofluorescent nanocomposites combined with quantum dots and using magnetic fluorescence-linked immunoassay. The magnetofluorescent nanocomposites enable efficient mixing, fast re-concentration, and nanoparticle quantization for optimal reactions. Biofunctional quantum dots were used to confirm the alpha-fetoprotein (AFP) content in sandwich immunoassay after mixing and washing. The analysis time was only one third that required in ELISA. The detection limit was 0.2 pg mL^-1, and the linear range was 0.68 pg mL^-1-6.8 ng mL^-1. This detection limit is lower, and the linear range is wider than those of ELISA and other methods. The measurements made using the proposed method differed by less than 13% from those obtained using ELISA for four AFP concentrations (0.03, 0.15, 0.75, and 3.75 ng mL^-1). The proposed method has a considerable potential for biomarker detection in various analytical and biomedical applications. Graphical abstract Magnetofluorescent nanocomposites combined with fluorescent quantum dots were used in magnetic fluorescence-linked immunoassay.

Preparation and characterization of universal Fe3O4@SiO2/CdTe nanocomposites for rapid and facile detection and separation of membrane proteins

The separation and enrichment of cell membrane proteins was achieved by the construction of bi-functional magnetic fluorescent nanoprobes.

Preparation and biomedical applications of bright robust silica nanocapsules with multiple incorporated InP/ZnS quantum dots

InP/ZnS quantum dots incorporated in silica capsules are robust and bright, and can image cells clearly.

Antioxidant activity of omega-3 derivatives and their delivery via nanocages and nanocones: DFT and experimental in vivo investigation

The antioxidant properties of omega-3 were investigated via experimental in vivo and theoretical methods. For experimental evaluation, oxidative stress was induced by 30 min bilateral renal ischemia and 24 h of reperfusion in male Sprague Dawley rats. The oxidative stress was evaluated through measuring malondialdehyde (MDA) and ferric reducing/antioxidant power (FRAP) levels in renal tissue. In theoretical methods, the reaction enthalpies of antioxidant mechanisms of omega-3 were calculated and the effects of NHMe, OMe, OH, Cl, and Me substituents on its antioxidant activity were investigated. Moreover, the omega-3 delivery potential by carbon and boron nitride nanocages and naocones were evaluated. The experimental results showed that omega-3 administration decreases MDA and increases FRAP levels after their changes by ischemia/reperfusion. Theoretical results indicated that NHMe and OMe substituents can significantly improve the antioxidant activity of omega-3. Also, boron nitride nanocone (BNNC) has higher |∆E_ad| values, so it has higher potential for omega-3 delivery. Taken together, the new findings presented here indicate that omega-3 has anti-oxidative properties and NHMe and OMe substituents can improve its antioxidant activity. Moreover, adsorption of omega-3 on the surface of the studied nanostructures was exothermic, and BNNC with higher |∆Ead| values has higher potential for omega-3 delivery. Graphical abstract The interaction and adsorption of BNNC with omega-3 is exothermic and experimentally possible from the energetic viewpoint, so the BNNC with higher |∆E_ad| and |∆G_ad| values has higher potential for omega-3 delivery.

Magnetic Lateral Flow Strip for the Detection of Cocaine in Urine by Naked Eyes and Smart Phone Camera

Magnetic lateral flow strip (MLFS) based on magnetic bead (MB) and smart phone camera has been developed for quantitative detection of cocaine (CC) in urine samples. CC and CC-bovine serum albumin (CC-BSA) could competitively react with MB-antibody (MB-Ab) of CC on the surface of test line of MLFS. The color of MB-Ab conjugate on the test line relates to the concentration of target in the competition immunoassay format, which can be used as a visual signal. Furthermore, the color density of the MB-Ab conjugate can be transferred into digital signal (gray value) by a smart phone, which can be used as a quantitative signal. The linear detection range for CC is 5–500 ng/mL and the relative standard deviations are under 10%. The visual limit of detection was 5 ng/mL and the whole analysis time was within 10 min. The MLFS has been successfully employed for the detection of CC in urine samples without sample pre-treatment and the result is also agreed to that of enzyme-linked immunosorbent assay (ELISA). With the popularization of smart phone cameras, the MLFS has large potential in the detection of drug residues in virtue of its stability, speediness, and low-cost.

Cadmium-containing quantum dots: properties, applications, and toxicity

The marriage of biology with nanomaterials has significantly accelerated advancement of biological techniques, profoundly facilitating practical applications in biomedical fields. With unique optical properties (e.g., tunable broad excitation, narrow emission spectra, robust photostability, and high quantum yield), fluorescent quantum dots (QDs) have been reasonably functionalized with controllable interfaces and extensively used as a new class of optical probe in biological researches. In this review, we summarize the recent progress in synthesis and properties of QDs. Moreover, we provide an overview of the outstanding potential of QDs for biomedical research and innovative methods of drug delivery. Specifically, the applications of QDs as novel fluorescent nanomaterials for biomedical sensing and imaging have been detailedly highlighted and discussed. In addition, recent concerns on potential toxicity of QDs are also introduced, ranging from cell researches to animal models.

Advanced Functional Nanomaterials for Theranostics

Nanoscale materials have been explored extensively as agents for therapeutic and diagnostic (i.e. theranostic) applications. Research efforts have shifted from exploring new materials in vitro to designing materials that function in more relevant animal disease models, thereby increasing potential for clinical translation. Current interests include non-invasive imaging of diseases, biomarkers and targeted delivery of therapeutic drugs. Here, we discuss some general design considerations of advanced theranostic materials and challenges of their use, from both diagnostic and therapeutic perspectives. Common classes of nanoscale biomaterials, including magnetic nanoparticles, quantum dots, upconversion nanoparticles, mesoporous silica nanoparticles, carbon-based nanoparticles and organic dye-based nanoparticles, have demonstrated potential for both diagnosis and therapy. Variations such as size control and surface modifications can modulate biocompatibility and interactions with target tissues. The needs for improved disease detection and enhanced chemotherapeutic treatments, together with realistic considerations for clinically translatable nanomaterials will be key driving factors for theranostic agent research in the near future.

A dual-emission probe to detect moisture and water in organic solvents based on green-Tb3+ post-coordinated metal–organic frameworks with red carbon dots

A new dual-emission Tb³⁺@p-CDs/MOF (red carbon dots, green Tb³⁺) serves as a luminescent sensor for water and humidity, due to the agglomeration effect of p-CDs in different solvents.

Folic acid-conjugated carbon dots as green fluorescent probes based on cellular targeting imaging for recognizing cancer cells

Green fluorescent CDs using the natural product dandelion as a carbon source were covalently conjugated with folate to differentiate cancer cells from normal cells.

Carbon Dots Embedded Magnetic Nanoparticles @Chitosan @Metal Organic Framework as a Nanoprobe for pH Sensitive Targeted Anticancer Drug Delivery

Recently, nanoscale metal organic frameworks (NMOFs) have been demonstrated as a promising carrier for drug delivery, as they possess many advantages like large surface area, high porosity, and tunable functionality. However, there are no reports about the functionalization of NMOFs, which combines cancer-targeted drug delivery/imaging, magnetic property, high drug loading content, and pH-sensitive drug release into one system. Existing formulations for integrating target molecules into NMOF are based on multistep synthetic processes. However, in this study, we report an approach that combines NMOF (IRMOF-3) synthesis and target molecule (Folic acid) encapsulation on the surface of chitosan modified magnetic nanoparticles in a single step. A noticeable feature of chitosan is control and pH responsive drug release for several days. More importantly, doxorubicin (DOX) was incorporated into magnetic NMOF formulation and showed high drug loading (1.63 g DOX g(-1) magnetic NMOFs). To demonstrate the optical imaging, carbon dots (CDs) are encapsulated into the synthesized magnetic NMOF, thereby endowing fluorescence features to the nanoparticles. These folate targeted magnetic NMOF possess more specific cellular internalization toward folate-overexpressed cancer (HeLa) cells in comparison to normal (L929) cells.

Carbon nanomaterials: multi-functional agents for biomedical fluorescence and Raman imaging

Carbon based nanomaterials have emerged over the last few years as important agents for biomedical fluorescence and Raman imaging applications. These spectroscopic techniques utilize either fluorescently labelled carbon nanomaterials or the intrinsic photophysical properties of the carbon nanomaterial. In this review article we present the utilization and performance of several classes of carbon nanomaterials, namely carbon nanotubes, carbon nanohorns, carbon nanoonions, nanodiamonds and different graphene derivatives, which are currently employed for in vitro as well as in vivo imaging in biology and medicine. A variety of different approaches, imaging agents and techniques are examined and the specific properties of the various carbon based imaging agents are discussed. Some theranostic carbon nanomaterials, which combine diagnostic features (i.e. imaging) with cell specific targeting and therapeutic approaches (i.e. drug delivery or photothermal therapy), are also included in this overview.