Rapid method for the separation and recovery of endocrine-disrupting compound bisphenol AP from wastewater

Occurrence and exposure evaluation of bisphenol A and its analogues in indoor and outdoor dust from China

Bisphenol A (BPA) and its analogues have been proved to be harmful to human reproduction, endocrine and nervous system. But information on the occurrence and human exposure to bisphenol compounds (BPs) in dust (especially outdoor dust) is limited. In this study, 14 BPs were determined in 174 indoor dust samples and 202 outdoor dust samples from Chinese mainland, Hong Kong, Macau and Taiwan. BPA, BPS, BPAF, BPF, BPAP and BPE were widely detected with detection frequencies of 98.94 %, 98.67 %, 97.87 %, 95.21 %, 87.23 % and 71.54 %, respectively. The median total concentrations of the most detected six BPs in the dust were in the order of south urban indoors (556 ng/g) > south rural outdoors (438 ng/g) > south urban outdoors (432 ng/g) > south rural outdoors (418 ng/g) > north rural indoors (412 ng/g) > north urban outdoors (341 ng/g) > north urban indoors (311 ng/g) > north rural outdoors (246 ng/g). The amounts of garbage incineration, plastic output and recycled paper may have influence on the BPs levels. Some BPs (BPAF, BPAP, BPF and BPS) in the indoor and outdoor samples were significantly positively correlated. In addition, the BPs in the indoor dust from different indoor micro environments in Chengdu were investigated. BPA (median concentration: 571.2 ng/g) and BPF (median concentration: 114.3 ng/g) were the two primary BPs, accounting for 78.1 % of the median total concentrations of the investigated BPs. High concentration of BPA appeared in printing workshops and offices, while high concentration of BPAP, BPC, BPE and BPF appeared in electronic repair shops. Occupational exposure to BPs deserves attention in the future. ΣBPs exposure risk for children and adults in the urban areas of southern China was the highest. To our knowledge, this is the first report in China to study BPs in outdoor dust sample.

Toxicological evaluation of bisphenol analogues: preventive measures and therapeutic interventions

Bisphenol A (BPA) is a prominent endocrine-disrupting compound that shares structural similarities with estrogen. It is widely used, particularly in the production of food packaging, canned goods, and dental sealants. Of the eight bisphenol analogues, BPA is the most frequently utilized chemical in packaging food items, canned foods and dental sealants. However, chronic exposure to BPA can pose severe health risks, particularly in children. To ensure public safety, it is crucial to adopt proper precautionary measures to minimize BPA exposure. This article explores the toxic effects of bisphenols on various body systems and mechanisms, shedding light on their impact on the reproductive and endocrine system, obesity, albuminuria, and the generation of reactive oxygen species. Understanding the detrimental effects of bisphenols on these systems and mechanisms is vital for developing strategies to mitigate their harmful consequences. Furthermore, the article delves into the biotransformation processes of bisphenols, focusing on their occurrence in vertebrates, invertebrates, plants, and microorganisms. Investigating the biotransformation pathways provides valuable insights into the fate of bisphenols in various organisms and ecosystems. Lastly, the article emphasizes preventive measures to avoid bisphenol exposure and highlights the potential use of plant-based bioactive compounds for treatment strategies. By implementing effective preventive measures, such as utilizing BPA-free products and adopting safer alternatives, individuals can reduce their exposure to bisphenols. Additionally, exploring the potential of plant-based bioactive compounds as therapeutic agents offers promising avenues for addressing the adverse effects of bisphenols. The findings presented herein contribute to a better understanding of the novelty, significance, and potential implications of bisphenol research in the field, aiding in the development of safer practices and interventions to safeguard public health.

Analogy or fallacy, unsafe chemical alternatives: Mechanistic insights into energy metabolism dysfunction induced by Bisphenol analogs in HepG2 cells

Bisphenol analogs (BPs) are widely used as industrial alternatives for Bisphenol A (BPA). Their toxicity assessment in humans has mainly focused on estrogenic activity, while other toxicity effects and mechanisms resulting from BPs exposure remain unclear. In this study, we investigated the effects of three BPs (Bisphenol AF (BPAF), Bisphenol G (BPG) and Bisphenol PH (BPPH)) on metabolic pathways of HepG2 cells. Results from comprehensive cellular bioenergetics analysis and nontarget metabolomics indicated that the most important process affected by BPs exposure was energy metabolism, as evidenced by reduced mitochondrial function and enhanced glycolysis. Compared to the control group, BPG and BPPH exhibited a consistent pattern of metabolic dysregulation, while BPAF differed from both, such as an increased ATP: ADP ratio (1.29-fold, p < 0.05) observed in BPAF and significantly decreased ATP: ADP ratio for BPG (0.28-fold, p < 0.001) and BPPH (0.45-fold, p < 0.001). Bioassay endpoint analysis revealed BPG/BPPH induced alterations in mitochondrial membrane potential and overproductions of reactive oxygen species. Taken together these data suggested that BPG/BPPH induced oxidative stress and mitochondrial damage in cells results in energy metabolism dysregulation. By contrast, BPAF had no effect on mitochondrial health, but induced a proliferation promoting effect on cells, which might contribute to the energy metabolism dysfunction. Interestingly, BPPH induced the greatest mitochondrial damage among the three BPs but did not exhibit Estrogen receptor alpha (ERα) activating effects. This study characterized the distinct metabolic mechanisms underlying energy metabolism dysregulation induced by different BPs in target human cells, providing new insight into the evaluation of the emerging BPA substitutes.

Combined Toxic Effects of BPA and Its Two Analogues BPAP and BPC in a 3D HepG2 Cell Model

Bisphenol A (BPA) is one of the most commonly used substances in the manufacture of various everyday products. Growing concerns about its hazardous properties, including endocrine disruption and genotoxicity, have led to its gradual replacement by presumably safer analogues in manufacturing plastics. The widespread use of BPA and, more recently, its analogues has increased their residues in the environment. However, our knowledge of their toxicological profiles is limited and their combined effects are unknown. In the present study, we investigated the toxic effects caused by single bisphenols and by the combined exposure of BPA and its two analogues, BPAP and BPC, after short (24-h) and prolonged (96-h) exposure in HepG2 spheroids. The results showed that BPA did not reduce cell viability in HepG2 spheroids after 24-h exposure. In contrast, BPAP and BPC affected cell viability in HepG2 spheroids. Both binary mixtures (BPA/BPAP and BPA/BPC) decreased cell viability in a dose-dependent manner, but the significant difference was only observed for the combination of BPA/BPC (both at 40 µM). After 96-h exposure, none of the BPs studied affected cell viability in HepG2 spheroids. Only the combination of BPA/BPAP decreased cell viability in a dose-dependent manner that was significant for the combination of 4 µM BPA and 4 µM BPAP. None of the BPs and their binary mixtures studied affected the surface area and growth of spheroids as measured by planimetry. In addition, all BPs and their binary mixtures studied triggered oxidative stress, as measured by the production of reactive oxygen species and malondialdehyde, at both exposure times. Overall, the results suggest that it is important to study the effects of BPs as single compounds. It is even more important to study the effects of combined exposures, as the combined effects may differ from those induced by single compounds.

Bisphenol analogues in water and sediment from the Beibu Gulf, South China Sea: Occurrence, partitioning and risk assessment

Bisphenol analogues (BPs) have gained increasing attention in recent years due to their ubiquitousness in the environment, potential endocrine disrupting properties and ecological impacts. However, very little information is available on the occurrence, partitioning and ecological risks of BPs in marine environments. In the present study, six BPs were investigated in surface water and sediment samples from the Beibu Gulf, South China Sea. Results showed that bisphenol A (BPA) was the predominant BP in both water and sediment samples with levels ranging from 5.26 to 12.04 ng/L in water and 0.56 to 5.22 ng/g dw in sediment samples, followed by bisphenol AF (BPAF: 0.44-0.60 ng/L in water and 0.08-0.66 ng/g dw in sediment samples, respectively) and bisphenol S (BPS: 0.07-0.63 ng/L in water and not detected (ND) to 0.19 ng/g dw in sediment samples, respectively). There is no significant spatial difference of BPs levels between riverine sediment samples and coastal sediment samples. Compared with other studies, the concentrations of BPs from the Beibu Gulf were relatively low. The mean log-transformed sediment-seawater partitioning coefficients (log K_oc) ranged from 4.4 (DHBP) to 5.2 (BPAF) and the log K_oc values for all the target BPs were generally higher than those reported in freshwater environments. The present study firstly reported the field-based log K_oc values for BPB (mean: 4.5) and DHBP (mean: 4.4). The estimated risk quotient (RQ) and 17β-estradiol (E2) equivalent quotient (EEQ) values indicated that the ecological and human health impacts were negligible associated with target BPs. The present study provided reliable and detailed data for completely evaluating contamination level and environmental behaviors of BPs in the Beibu Gulf.

Adverse (geno)toxic effects of bisphenol A and its analogues in hepatic 3D cell model

Bisphenol A (BPA) is one of the most widely used and versatile chemical compounds in polymer additives and epoxy resins for manufacturing a range of products for human applications. It is known as endocrine disruptor, however, there is growing evidence that it is genotoxic. Because of its adverse effects, the European Union has restricted its use to protect human health and the environment. As a result, the industry has begun developing BPA analogues, but there are not yet sufficient toxicity data to claim that they are safe. We investigated the adverse toxic effects of BPA and its analogues (BPS, BPAP, BPAF, BPFL, and BPC) with emphasis on their cytotoxic and genotoxic activities after short (24-h) and prolonged (96-h) exposure in in vitro hepatic three-dimensional cell model developed from HepG2 cells. The results showed that BPFL and BPC (formed by an additional ring system) were the most cytotoxic analogues that affected cell viability, spheroid surface area and morphology, cell proliferation, and apoptotic cell death. BPA, BPAP, and BPAF induced DNA double-strand break formation (γH2AX assay), whereas BPAF and BPC increased the percentage of p-H3-positive cells, indicating their aneugenic activity. All BPs induced DNA single-strand break formation (comet assay), with BPAP (≥0.1 μM) being the most effective and BPA and BPC the least effective (≥1 μM) under conditions applied. The results indicate that not all of the analogues studied are safer alternatives to BPA and thus more in-depth research is urgently needed to adequately evaluate the risks of BPA analogues and assess their safety for humans.

Developmental and Reproductive Impacts of Four Bisphenols in Daphnia magna

Bisphenol A (BPA) is a typical endocrine-disrupting chemical (EDC) used worldwide. Considering its adverse effects, BPA has been banned or strictly restricted in some nations, and many analogs have been introduced to the market. In this study, we selected three representative substitutes, BPS, BPF, and BPAF, along with BPA, to assess the developmental and reproductive effects on Daphnia magna. The F0 generation was exposed to bisphenols (BPs) at an environmentally relevant concentration (100 μg/L) for 21 d; then the embryo spawn at day 21 was collected. Behavior traits, the activity of antioxidant enzymes, and gene transcription were evaluated at three developmental stages (days 7, 14, and 21). Notably, body length, heart rate, and thoracic limb beating were significantly decreased, and D. magna behaved more sluggishly in the exposed group. Moreover, exposure to BPs significantly increased the antioxidant enzymatic activities, which indicated that BPs activated the antioxidant defense system. Additionally, gene expression indicated intergenerational effects in larvae, particularly in the BPAF group. In conclusion, BPA analogs such as BPF and BPAF showed similar or stronger reproductive and developmental toxicity than BPA in D. magna. These findings collectively deepen our understanding of the toxicity of BPA analogs and provide empirical evidence for screening safe alternatives to BPA.

Mango Seed-Derived Hybrid Composites and Sodium Alginate Beads for the Efficient Uptake of 2,4,6-Trichlorophenol from Simulated Wastewater

In this study, mango seed shell (MS)-based hybrid composite and composite beads (FeCl3-NaBH4/MS and Na-Alginate/MS) were designed. Batch and column experimental analyses were performed for the uptake of 2,4,6-trichlorophenol (2,4,6-TCP) from wastewater. The physicochemical characteristics of both composites were also examined. From the batch adsorption experiments, the best adsorption capacities of 28.77 mg/g and 27.42 mg/g were observed in basic media (pH 9–10) at 308 K for FeCl3-NaBH4/MS and 333 K for Na-Alginate/MS with 25 mg/L of 2,4,6-TCP concentration for 120 min. The rate of reaction was satisfactorily followed by the pseudo-second-order kinetics. Equilibrium models revealed that the mechanism of reaction followed the Langmuir isotherm. The thermodynamic study also indicated that the nature of the reaction was exothermic and spontaneous with both adsorbents. Desorption experiments were also carried out to investigate the reliability and reusability of the composites. Furthermore, the efficiency of the adsorbents was checked in the presence of different electrolytes and heavy metals. From the batch experimental study, the FeCl3-NaBH4/MS composite proved to be the best adsorbent for the removal of the 2,4,6-TCP pollutant, hence it is further selected for fixed-bed column experimentation. The column study data were analyzed using the BDST and Thomas models and the as-selected FeCl3-NaBH4/MS hybrid composites showed satisfactory results for the fixed-bed adsorption of the 2,4,6-TPC contaminants.

Non-targeted metabolomics revealing the effects of bisphenol analogues on human liver cancer cells

Bisphenol analogues (BPs) are widely used in plastics, food packaging and other commercial products as non safer alternative of BPA. As emerging environmental contaminants, BPs have received considerable attention for their adverse effects on human health. However, their effects on liver metabolisms are only marginally understood. In this study, high-resolution mass spectrometry-based global metabolomics and extracellular flux (XF) analysis were applied to characterize the cellular metabolome alterations and reveal the possible mechanisms of the metabolic disorders associated with BPs-induced toxicity in HepG2 cells. BPE, BPB and BPAP with similar chemical structures were selected to compare their interference with different metabolic pathways. A total of 61 key metabolite profiles were significantly altered after exposure to the three BPs. Overall, BPs altered metabolites which are associated with energy metabolism, oxidative stress, cell proliferation and nucleotides synthesis. The primary dysregulated pathways included energy and nucleotides synthesis related Purine and Glycolysis/Gluconeogenesis metabolism. In addition, attenuated mitochondrial function and enhanced glycolysis were found under BPB and BPAP treatment. While attenuated glycolysis was observed under BPE treatment. These findings may provide potential biomarkers indicating the cytotoxicity of BPs and prompt a deeper understanding of the intramolecular metabolic processes induced by BPs exposure.

A mutispectroscopic study on the structure-affinity relationship of the interactions of bisphenol analogues with bovine serum albumin

Bisphenol A (BPA) is a recognized endocrine-disrupting chemical (EDC), and its analogues also exert negative effects on health. The structure-affinity relationship between the structures of nine bisphenol (BP) analogues and the conformational changes of bovine serum albumin (BSA) was studied by various characterization methods and molecular docking. BPs including BPA and its analogues, bisphenol B (BPB), bisphenol C (BPC), bisphenol AP (BPAP), bisphenol M (BPM), bisphenol P (BPP), bisphenol Z (BPZ), diethylstilbestrol (DES) and dienestrol (DS) interacted with BSA. At the concentration of 3.85 × 10^-5 mol l^-1, DS was found to lead to 64% quenching, while BPAP, BPM and DES quenched 60%, 59% and 55% of BSA fluorescence, respectively. The values of ΔH (-19.31-135.42 kJ mol^-1) and ΔS (12.52-495.63 J mol^-1 K^-1) indicated that hydrophobic interactions and hydrogen bonds played important roles in the binding process. The binding constants of DS (8.87 × 10⁴ l mol^-1), DES (3.05 × 10⁴ l mol^-1), BPAP (1.52 × 10⁴ l mol^-1), BPC (1.16 × 10⁴ l mol^-1) and BPM (1.10 × 10⁴ l mol^-1) to BSA were greater than that of BPA (1.18 × 10³ l mol^-1) to BSA, indicating that they may exert more negative effects than BPA. The molecular structure differences of these BPs partly affected their ability to bind to BSA. The binding constants of BPB/BPP to BSA were smaller due to the steric hindrance of ethyl and benzene ring. BPs with conjugated double bond structures (DS and DES) and benzene ring structures (BPM, BPP, BPAP) had a greater influence on the conformation of BSA.

Removal of pharmaceuticals from water using sewage sludge-derived biochar: A review

In recent years, considerable attention has been paid to the beneficial utilization of sewage sludge to reduce the risks associated with sludge disposal. Besides other applications of sludge, biochar produced from sludge has also been employed for the elimination of various pollutants from water. This review critically evaluates the recent progress in applications of sludge-based biochar for the adsorption of pharmaceuticals from water. The synthesis techniques of biochar production from sludge and their effects on physicochemical characteristics of produced biochar are discussed. The removal of various pharmaceuticals by sludge-based biochar are described in detail, with the emphasis on the adsorption mechanism and their reusability potential. It is evident from the literature that sludge-based biochar has demonstrated excellent potential for the adsorption of numerous pharmaceuticals from the aqueous phase. The major hurdles and issues related to the synthesis of sludge-based biochar and applications are highlighted, with reference to the adsorption of pharmaceuticals. Finally, a roadmap is suggested along with future research directions to ensure the sustainable production of biochar from sludge and its applications in water treatment.

Occurrence, distribution, and risk assessment of bisphenol analogues in Luoma Lake and its inflow rivers in Jiangsu Province, China

Bisphenol analogs (BPs) are widely used in industrial and commercial products and have been detected in surface water, sediment, sewage, and sludge. The presence of BPs in the natural environment poses threats to the aquatic ecosystem and human health. The concentration, distribution, seasonal variation, and risk assessment of BPA and BPA structural analogs including BPB, BPF, BPS, BPZ, BPAF, and BPAP in surface water and sediment during dry season and flood season in Luoma Lake and its inflow rivers in Jiangsu Province, China, were investigated in this study. The detection frequency of BPA and BPF was 100%. Although the use of BPA is restricted, BPA is still the dominant BPs in surface water and sediment. The concentration of BPs in surface water during flood season was higher than that in dry season. The concentrations of BPs in Fangting River, Zhongyun River, and Bulao River were higher than those in Luoma Lake. The average concentrations of BPs in surface water were in the order of BPA > BPF> BPS> BPB > BPZ > BPAF> BPAP. Compared with other studies, the concentration of BPs in Luoma Lake was moderate. There is no significant spatial distribution and difference in seasonal variation of BPs concentration in sediment (p > 0.05). Compared with other studies, the contamination of BPs in sediment of Luoma Lake was relatively low. Risk quotient (RQ) was used to evaluate the ecological risk of BPs in water environment, and the 17β estradiol equivalent (EEQ) method was used to estimate the estrogenic activity of BPs. The risk assessment showed no high ecological risk (RQ < 1.0) and estrogenic risk (EEQ < 1.0 ng/L) in dry season and flood season. The estimated RQ and EEQ_t indicated that the ecological and human health impacts were negligible in the short term.

Degradations of endocrine-disrupting chemicals and pharmaceutical compounds in wastewater with carbon-based nanomaterials: a critical review

Although water occupies 75% of the earth's surface, only 0.0067% of the total water is available for human activities. These statistics further decline with the population growth and consequent multiplication in the amount of annual waste produced. The demand for clean and safe drinking water has always been a prime concern in the global scenario. Among various types of waste materials, endocrine-disrupting chemicals (EDCs) and pharmaceutical effluents have become a constant threat to the aquatic ecosystem and possess challenges worldwide. Endocrine-disrupting chemicals (EDCs) are a mixed group of emerging concern chemicals with the ability to mimic the mechanisms of biosynthesis, transport, and metabolism of hormones. These chemicals pose various health threats such as early puberty, infertility, obesity, diabetes, reproductive disorders, cancerous tumors, and related disorders (immune cells, hormones' activity, and various organs). On the other hand, pharmaceutical compounds such as antibiotics also harm the natural environment, human health, and soil microbiology. Their low concentration, ranging from a few ng/L to μg/L, gives rise to a micro-pollution phenomenon, which makes it difficult to detect, analyze, and degrade in wastewater treatment plants. Activated carbons (ACs) and other adsorbents, including naturally occurring materials (wood, keratin) are considered as nanomaterials (NMs) reference for the separation of organic pollutants. It is generally acknowledged that mass-transfer phenomena control sorption kinetics at the liquid/solid interface, with retention controlled by the sorbent/sorbate properties. Therefore, the type of interaction (strong or weak van der Waals forces) and the hydrophilic/hydrophobic properties of the adsorbent are two crucial factors. Besides, EDCs and pharmaceutical compound sorption on such kinds of nanoporous solids depend on both the molecule size and charge density. The applications of nanomaterials on non-conservative methods, like advanced oxidation processes or AOPs (e.g., photocatalysis and Fenton reaction), are contemplated as more apt in comparison to conservative technology like reverse osmosis nanofiltration, and adsorption, etc. One of the reasons is that AOPs generate free radicals (hydroxyls), which are strong oxidants for the demineralization of organic compounds and the extreme case that hydroxyl radicals can attack any kinds of pollutants with the generation of only water and carbon dioxide as final products. AOPs may imply the use of NMs as either catalysts or photocatalysts, which improve the selective removal of the target pollutant. Therefore, various literature reviews have revealed that there is a timely need to upgrade the efficiency of the remediation approaches to protect the environment against EDCs and pharmaceuticals adequately. There is currently a lack of definitive risk assessment tools due to their complicated detection and associated insufficiency in the health risk database. Hence, our present review focuses on applying carbon-based nanomaterials to remove EDCs and pharmaceuticals from aqueous systems. The paper covers the effect of these pollutants and photocatalytic methods for treating these compounds in wastewater, along with their limitations and challenges, plausible solutions, and prospects of such techniques.

Synthesis of hierarchically structured T-ZnO-rGO-PEI composite and their catalytic removal of colour and colourless phenolic compounds

Phenolic compounds bisphenol A (BPA) and 4-nitrophenol (4-NP) are the prime water contaminants. As reported, these compounds are some of the highly hazardous ones to the human and living species. In this study, T-ZnO-rGO-PEI composite was synthesized employing hydrothermal method and the obtained composite samples were systematically characterized by FTIR, XPS, FE-SEM and HR-TEM studies. The FTIR, XPS analysis confirmed the successful surface modification of T-ZnO-rGO-PEI composite. The FE-SEM morphology confirmed the formation of ZnO (arm length about 2.5 μm) tetrapod structured in synthesized T-ZnO-rGO-PEI composite. The thickness of formed ZnO arm (0.44 μm) was increased after the polymer coating which confirmed the successful surface modification by PEI polymer. The HR-TEM images confirm the uniform coating of PEI polymer on T-ZnO-rGO surface. The catalytic activity and adsorption capacity of the synthesized T-ZnO-rGO-PEI composite was successfully explored using 4-nitrophenol and bisphenol-A as model pollutants .T-ZnO-rGO-PEI composite and found that 4-NP reduction reaction was completed within 10 min with the rate of 0.224 min^-1. The BPA adsorption over T-ZnO-rGO-PEI exhibited high adsorption rate of 0.0210 min^-1. In addition, the detailed 4-NP reduction and BPA adsorption mechanism was demonstrated. Hence the synthesized T-ZnO-rGO-PEI composite is a promising catalyst for the removal of micropollutants in aqueous medium.

Rapid elimination of trace bisphenol pollutants with porous β-cyclodextrin modified cellulose nanofibrous membrane in water: adsorption behavior and mechanism

A porous β-cyclodextrin modified cellulose nano-fiber membrane (CA-P-CDP) was fabricated and employed to treat the trace bisphenol pollutants (bisphenol A (BPA), bisphenol S (BPS), and bisphenol F (BPF)) in water. The characterization highlighted the porous structure, stable crystal structure, good thermal stability of the obtained CA-P-CDP, as well as abundant functional groups, which could greatly improve the adsorption of bisphenol pollutants and recovery. During the static adsorption process, the adsorbents dosage, temperature and pH showed significant influence on the adsorption performance. At the selected conditions (25 °C, 7.0 of pH and 0.1 g L^-1 of CA-P-CDP dosage), the BPA/BPS/BPF adsorption on CA-P-CDP could rapidly reached the equilibrium in 15 min by following the pseudo-second-order kinetic model, and the maximum adsorption capacities were 50.37, 48.52 and 47.25 mg g^-1, respectively, according to Liu isotherm model. The mechanisms between the bisphenol pollutants and CA-P-CDP mainly involved the synergism of hydrophobic effects, hydrogen-bonding interactions and π-π stacking interactions. Besides, the dynamic adsorption data showed that the volume of treated water for CA-P-CDP (0.58 L) was 14.5 times larger than that of pristine cellulose membrane (0.04 L), revealing satisfactory adsorption performance of trace BPA in water. Furthermore, during the treatment of real water samples (lake water and river water) with trace bisphenol pollutants, the complete removal of the pollutants were evidently observed, which strongly verified the possibility of CA-P-CDP for the practical application.

Biochar based sorptive remediation of steroidal estrogen contaminated aqueous systems: A critical review

Remediation of steroidal estrogens from aqueous ecosystems is of prevailing concern due to their potential impact on organisms even at trace concentrations. Biochar (BC) is capable of estrogen removal due to its rich porosity and surface functionality. The presented review emphasizes on the adsorption mechanisms, isotherms, kinetics, ionic strength and the effect of matrix components associated with the removal of steroidal estrogens. The dominant sorption mechanisms reported for estrogen were π-π electron donor-acceptor interactions and hydrogen bonding. Natural organic matter and ionic species were seen to influence the hydrophobicity of the estrogen in multiple ways. Zinc activation and magnetization of the BC increased the surface area and surface functionalities leading to high adsorption capacities. The contribution by persistent free radicals and the arene network of BC have promoted the catalytic degradation of adsorbates via electron transfer mechanisms. The presence of surface functional groups and the redox activity of BC facilitates the bacterial degradation of estrogens. The sorptive removal of estrogens from aqueous systems has been minimally reviewed as a part of a collective evaluation of micropollutants. However, to the best of our knowledge, a critique focusing specifically and comprehensively on BC-based removal of steroidal estrogens does not exist. The presented review is a critical assessment of the existing literature on BC based steroidal estrogen adsorption and attempts to converge the scattered knowledge regarding its mechanistic interpretations. Sorption studies using natural water matrices containing residue level concentrations, and dynamic sorption experiments can be identified as future research directions.

Zebrafish Embryonic Exposure to BPAP and Its Relatively Weak Thyroid Hormone-Disrupting Effects

Safe endocrine-disrupting alternatives for bisphenol A (BPA) are needed because its adverse health effects have become a public concern. Some bisphenol analogues (bisphenol F and S) have been applied, but their endocrine-disrupting potential is either not negligible or weaker than that of BPA. However, the endocrine-disrupting potential of bisphenol AP (BPAP), another BPA alternative, has not yet been fully assessed. Hence, we evaluated the thyroid hormone (TH)-disrupting potency of BPAP because THs are essential endocrine hormones. Zebrafish embryos were exposed to BPAP (0, 18.2, 43.4, or 105.9 μg/L) for 120 h, and TH levels, the transcription of 16 TH-related genes, the transcriptome, development, and behavior were evaluated. In our study, a decrease in T4 level was observed only at the maximum nonlethal concentration, but significant changes in the T3 and TSHβ levels were not detected. BPAP did not cause significant changes in transcription and gene ontology enrichment related to the TH system. Developmental and behavioral changes were not observed. Despite T4 level reduction, other markers were not significantly affected by BPAP. These might indicate that BPAP has weak or negligible potency regarding TH disruption as a BPA alternative. This study might provide novel information on the TH-disrupting potential of BPAP.

Bisphenol analogue concentrations in human breast milk and their associations with postnatal infant growth

Many studies show that bisphenol A (BPA) is widespread in human breast milk. However, the occurrence of other bisphenol analogues (BPs), including bisphenol S (BPS), bisphenol F (BPF), and bisphenol AF (BPAF), in breast milk is still not well known. In this study, breast milk samples were collected from 190 women in Hangzhou, China, with the aims to characterize the occurrence of BPA, BPS, BPF, and BPAF in these samples and to investigate their effects on postnatal growth of infants through breast milk consumption. BPA (mean 2.5 ng/mL, range < LOD-15 ng/mL) was the most abundant BP in breast milk, followed by BPS (0.19 ng/mL, <LOD-1.3 ng/mL) and BPAF (0.092 ng/mL, <LOD-0.58 ng/mL). BPF was not detected in all breast milk samples. We firstly found that breast milk concentrations of BPA were negatively correlated with infant's weight or length gain rate. Daily intakes (DIs) of BPs via the consumption of breast milk were calculated for infants, and the mean DI values were 531 ng/kg/day, 53 ng/kg/day, and 24 ng/kg/day for BPA, BPS, and BPAF, respectively. Overall, this study firstly demonstrats that the lactation exposure to BPA through breast milk consumption may affect the postnatal growth of infants.

Biotransformation of bisphenol A analogues by the biphenyl-degrading bacterium Cupriavidusbasilensis - a structure-biotransformation relationship

Comparative analyses determined the relationship between the structure of bisphenol A (BPA) as well as of seven bisphenol analogues (bisphenol B (BPB), bisphenol C (BPC), bisphenol E (BPE), bisphenol F (BPF), bisphenol Z (BPZ), bisphenol AP (BPAP), bisphenol PH (BPPH)) and their biotransformability by the biphenyl-degrading bacterium Cupriavidus basilensis SBUG 290. All bisphenols were substrates for bacterial transformation with conversion rates ranging from 6 to 98% within 216 h and 36 different metabolites were characterized. Transformation by biphenyl-grown cells comprised four different pathways: (a) formation of ortho-hydroxylated bisphenols, hydroxylating either one or both phenols of the compounds; (b) ring fission; (c) transamination followed by acetylation or dimerization; and (d) oxidation of ring substituents, such as methyl groups and aromatic ring systems, present on the 3-position. However, the microbial attack of bisphenols by C. basilensis was limited to the phenol rings and its substituents, while substituents on the carbon bridge connecting the rings were not oxidized. All bisphenol analogues with modifications at the carbon bridge could be oxidized up to ring cleavage, while substituents at the 3-position of the phenol ring other than hydroxyl groups did not allow this reaction. Replacing one methyl group at the carbon bridge of BPA by a hydrophobic aromatic or alicyclic ring system inhibited both dimerization and transamination followed by acetylation. While most of the bisphenol analogues exhibited estrogenic activity, four biotransformation products tested were not estrogenically active.

Adsorption Characteristics and Mechanism of Bisphenol A by Magnetic Biochar

In this paper, biochar (BC) was prepared from discarded grapefruit peel and modified to prepare magnetic biochar (MBC). Physical and chemical properties of BC and MBC were characterized, and the results showed that the type of iron oxide loaded by MBC was γ-Fe₂O₃. Compared with BC, MBC has a larger specific surface area and pore volume, with more oxygen-containing functional groups on the surface. BC and MBC were used to adsorb and remove endocrine-disrupting chemical (EDC) bisphenol A (BPA) from simulated wastewater. The results showed that the adsorption kinetics and adsorption isotherm of BPA adsorption by BC and MBC were mainly in accordance with the pseudo-second-order kinetics model and the Langmuir model. This indicates that the adsorption of BPA on BC and MBC is mainly a chemically controlled monolayer adsorption. Adsorption thermodynamics show that BC and MBC adsorption of BPA is a spontaneous exothermic reaction, and lowering the temperature is conducive to the adsorption reaction. The effect of solution pH on the adsorption of BPA by both was significant. The optimum pH for BC and MBC to absorb BPA was 6 and 3, respectively. The concentration of Na⁺ in the range of 0–0.10 mol·L⁻¹ can promote the adsorption of BPA to MBC. MBC loaded with γ-Fe₂O₃ not only has excellent magnetic separation ability, but can also reach about 80% of the initial adsorption capacity after four cycles of adsorption. By analyzing the adsorption mechanism, it was found that the H-bond and the π–π electron donor–acceptor interaction (EDA) were the main forces for BC and MBC to adsorb BPA.

Zeolitic imidazolate framework-8 coated Fe3O4@SiO2 composites for magnetic solid-phase extraction of bisphenols

A new magnetic composite material ZIF-8 coated Fe₃O₄@SiO₂ was employed for preconcentration and detection of trace BPs in water and plastic products.

Occurrence, fate and risk assessment of BPA and its substituents in wastewater treatment plant: A review

Several bisphenol analogues (BPs) are gradually replacing bisphenol A (BPA) in many fields, following strict restrictions on the production and use of BPA. The presence of micropollutants in wastewater treatment plants (WWTPs) may pose risks to the aquatic ecosystem and human health. In this review, we outlined the occurrence and fate of BPs in WWTPs, and estimated their potential risks to the aquatic ecosystem. BPA is still the most predominant bisphenol analogue in WWTPs with high detection rate and concentration, followed by bisphenol S (BPS) and F (BPF). Biodegradation and adsorption are the main removal pathways for removal of BPs in WWTPs. The secondary (activated sludge process, biological aerated filter, and membrane bioreactor) and advanced (membrane technique, ultraviolet disinfection, adsorption process, and ozonation) treatment processes show high removal efficiency for BPs, which are influenced by many factors such as sludge retention time and redox conditions. BPs other than BPA (assessed in this review) in effluent of WWTPs have low risks to Daphnia magna and early life stages on medaka, while BPA shows a medium or high risk under certain conditions. Knowledge gaps have been identified and future line of research on this class of chemicals in WWTPs is recommended. More data are needed to illustrate the occurrence and fate of BPs in WWTPs. Environmental risks of BPs other than BPA initiating from wastewater discharge to aquatic organisms remain largely unknown.

Hierarchically Porous Composite Scaffold Composed of SBA-15 Microrods and Reduced Graphene Oxide Functionalized with Cyclodextrin for Water Purification

Large-scale decontamination of bisphenol A (BPA) from wastewater under field conditions is an urgent need because of the harmful toxic effects of BPA on living organisms. In this study, we report the fabrication of a three-dimensional (3D) hierarchically porous composite scaffold composed of mesoporous SBA-15 silica microrods and reduced graphene oxide (rGO-CD) functionalized with β-cyclodextrin (CD) and its application for BPA separation from contaminated water. The macroporous structure was achieved by sacrificial salt leaching, and the mesoporous structure was derived from the interparticle pores between compressed SBA-15 particles and intrinsic mesopores in SBA-15. The 3D hierarchical macroporous and mesoporous architecture of the scaffold enhances mass transport without any external forces, and the rGO-CD component provides good capture sites for BPA in solution via inclusion complexation between CD and BPA. The inorganic SBA-15 component of the scaffold also allows long-term operation of filters by increasing the mechanical strength of the scaffold. The hierarchically porous SBA-15/rGO-CD composite scaffold could separate BPA from contaminated water significantly better than the scaffold without rGO-CD in both batch and filter systems. Our study indicates that the functional hierarchically porous composite scaffold can be a potential material in wastewater treatment technology.

Occurrence and exposure assessment of bisphenol analogues in source water and drinking water in China

Bisphenol analogues (BPs) are widely used in the production of epoxy resins and polycarbonate plastics. In recent years, the demand and production capacity of BPs are growing rapidly in China. However, knowledge on the occurrence of BPs other than bisphenol A (BPA) in the aquatic environment, especially in source and drinking water, is still limited. In this study, occurrence of 16 BPs, which have been used in various industrial applications, was investigated in source and drinking water from twenty drinking water treatment plants (DWTPs) across China. In source water, BPA, bisphenol AF (BPAF), bisphenol B (BPB), bisphenol E (BPE), bisphenol F (BPF), and bisphenol S (BPS) were detected at the following concentration ranges: BPA (n.d.-34.9 ng/L), BPAF (n.d.-10.8 ng/L), BPB (n.d.-14.3 ng/L), BPE (n.d.-6.2 ng/L), BPF (n.d.-12.6 ng/L), and BPS (n.d.-5.2 ng/L). In drinking water BPA, BPAF, BPB, BPE, BPF, and BPS were detected as follows: BPA (n.d. - 6.5 ng/L), BPAF (n.d.-4.7 ng/L), BPB (n.d.-3.2 ng/L), BPE (n.d.-0.6 ng/L), BPF (n.d.-0.9 ng/L), and BPS (n.d.-1.6 ng/L). In addition, to assess the exposure of BPs through drinking water consumption, the estimated daily intake of each detected BPs was calculated. The estimated daily intake (EDIs) was below 0.25 ng/kg bw/day for each detected BPs, much lower than the tentative oral reference dose (RfD) values for BPA (4 μg/kg bw/day) recommended by the European Food Safety Authority.

Removal of emerging contaminants from the environment by adsorption

Emerging contaminants (EC's) are pollutants of growing concern. They are mainly organic compounds such as: pesticides, pharmaceuticals and personal care products, hormones, plasticizers, food additives, wood preservatives, laundry detergents, surfactants, disinfectants, flame retardants, and other organic compounds that were found recently in natural wastewater stream generated by human and industrial activities. A majority of ECs does not have standard regulations and could lead to lethal effects on human and aquatic life even at small concentrations. The conventional primary and secondary water treatment plants do not remove or degrade these toxic pollutants efficiently and hence need cost effective tertiary treatment method. Adsorption is a promising method worldwide for EC removal since it is low initial cost for implementation, highly-efficient and has simple operating design. Research has shown that the application of different adsorbents such as, activated carbons(ACs), modified biochars (BCs), nanoadsorbents (carbon nanotubes and graphene), composite adsorbents, and other are being used for EC's removal from water and wastewater. The current review intends to investigate adsorption process as an efficient method for the treatment of ECs. The mechanism of adsorption has also been discussed.

High throughput microscopy identifies bisphenol AP, a bisphenol A analog, as a novel AR down-regulator

Prostate cancer remains a deadly disease especially when patients become resistant to drugs that target the Androgen Receptor (AR) ligand binding domain. At this stage, patients develop recurring castrate-resistant prostate cancers (CRPCs). Interestingly, CRPC tumors maintain dependency on AR for growth; moreover, in CRPCs, constitutively active AR splice variants (e.g., AR-V7) begin to be expressed at higher levels. These splice variants lack the ligand binding domain and are rendered insensitive to current endocrine therapies. Thus, it is of paramount importance to understand what regulates the expression of AR and its splice variants to identify new therapeutic strategies in CRPCs. Here, we used high throughput microscopy and quantitative image analysis to evaluate effects of selected endocrine disruptors on AR levels in multiple breast and prostate cancer cell lines. Bisphenol AP (BPAP), which is used in chemical and medical industries, was identified as a down-regulator of both full length AR and the AR-V7 splice variant. We validated its activity by performing time-course, dose-response, Western blot and qPCR analyses. BPAP also reduced the percent of cells in S phase, which was accompanied by a ~60% loss in cell numbers and colony formation in anchorage-independent growth assays. Moreover, it affected mitochondria size and cell metabolism. In conclusion, our high content analysis-based screening platform was used to classify the effect of compounds on endogenous ARs, and identified BPAP as being capable of causing AR (both full-length and variants) down-regulation, cell cycle arrest and metabolic alterations in CRPC cell lines.

Bioaccumulation and biomagnification of emerging bisphenol analogues in aquatic organisms from Taihu Lake, China

Due to regulations on bisphenol A (BPA) in many countries, a variety of bisphenol analogues are being widely manufactured and applied. However, there is a big knowledge gap on bioaccumulation and biomagnification of these emerging bisphenols in aquatic organisms. The bioaccumulation and magnification of nine bisphenol analogues in aquatic organisms at different trophic levels collected from Taihu Lake, China, were evaluated. The total concentrations of the nine bisphenols in the lake waters were in the range of 49.7-3480ng/L (mean, 389ng/L). BPA, bisphenol AF (BPAF) and bisphenol S (BPS) were the most predominant analogues in the water. The mean natural logarithm bioaccumulation factor (log BAFs) of BPAF, bisphenol C (BPC), bisphenol Z (BPZ) and bisphenol E (BPE) were greater than BPA, and there was a significantly positive correlation between log BAFs of the biphenols and their octanol-water partition coefficients (log K_ow). The trophic magnification factors of BPAF, BPC and BPZ were 2.52, 2.69 and 1.71, respectively, suggesting that they had the potential to biomagnify in the food web. The results of this study call for further investigations on risk assessment of these emerging pollutants in the environment.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Occurrence and partitioning of bisphenol analogues in water and sediment from Liaohe River Basin and Taihu Lake, China

Bisphenol analogues are widely used in the manufacture of polycarbonate plastics and epoxy resins, and the demand and production capacity of these compounds are growing rapidly in China. The occurrence and distribution of bisphenol analogues other than bisphenol A (BPA) in the aquatic environment is still poorly understood. In this study, nine bisphenol analogues were measured in water and sediment samples from Taihu Lake (TL), Liaohe River basin, including Liaohe River (LR) and Hunhe River (HR), China. Water samples from LR and HR contained much higher total bisphenols (∑BPs) concentrations. BPA and bisphenol S (BPS) were predominant with a summed contribution of 55, 75, and 75% to the ∑BPs in TL, LR, and HR waters, respectively. This suggests that BPA and BPS were the most widely used and manufactured bisphenols in these regions. In sediment, BPA was always predominant, with the next abundant compound bisphenol F (BPF) in TL and HR sediment, but BPS in LR sediment. The average field sediment-water partitioning coefficients (log Koc) were calculated for the first time for certain bisphenols and were determined to be 4.7, 4.6, 3.8, 3.7, and 3.5 mL/g for BPF, BPAP, BPA, BPAF, and BPS, respectively.

Adsorption of Emerging Ionizable Contaminants on Carbon Nanotubes: Advancements and Challenges

The superior adsorption capacity of carbon nanotubes has been well recognized and there is a wealth of information in the literature concerning the adsorption of unionized organic pollutants on carbon nanotubes. Recently, the adsorption of emerging environmental pollutants, most of which are ionizable, has attracted increasing attention due to the heightened concerns about the accumulation of these emerging contaminants in the environment. These recent studies suggest that the adsorption of emerging ionizable contaminants on carbon nanotubes exhibit different characteristics than unionized ones. For example, a new charge-assisted intermolecular force has been proposed for ionizable compounds because some adsorption phenomenon cannot be easily explained by the conventional force theory. The adsorption of ionizable compounds also displayed much stronger dependence on solution pH and ionic strength than unionized compounds. This article aims to present a brief review on the current understanding of the adsorption of emerging ionizable contaminants to carbon nanotubes and discuss further research needs required to advance the mechanistic understanding of the interactions between ionizable contaminants and carbon nanotubes.

Multi-walled carbon nanotubes with selected properties for dynamic filtration of pharmaceuticals and personal care products

In this study, multi-walled carbon nanotubes (MWCNT) with selected properties, including pristine MWCNT, hydroxylated MWCNT (H-MWCNT), thin-walled MWCNT with large inner diameter (L-MWCNT), aminated MWCNT, and high-purity MWCNT were investigated for dynamic removal of eight pharmaceuticals and personal care products (PPCP). The removal ratios of different PPCP by the pristine MWCNT followed a decreasing order of triclosan (0.93) > prometryn (0.71) > 4-acetylamino-antipyrine (0.67) > carbendazim (0.65) > caffeine (0.42) > ibuprofen (0.34) > acetaminophen (0.29) at 100 min of filtration. Similar or even higher PPCP removals were obtained for all PPCP as the influent concentration decreased, suggesting potential consistent PPCP removals at environmental PPCP concentrations. The removal ratio of acetaminophen was increased to 0.74 by using H-MWCNT. SRFA (Suwannee River fulvic acid) suppressed PPCP adsorption to MWCNT, to greater extents with increasing SRFA concentrations. The L-MWCNT, despite a large inner diameter of 52 ± 3 nm, did not provide better resistance to the competitive adsorption of SRFA than MWCNT with a small inner diameter of 10 ± 2 nm. Future research will be conducted to minimize the effect of SRFA and facilitate application of MWCNT to the treatment of PPCP-contaminated water.

Adsorption of bisphenol A based on synergy between hydrogen bonding and hydrophobic interaction

The study mainly investigated the synergetic adsorption of hydrogen bonding and hydrophobic interaction. To simplify the adsorption driving forces and binding sites, the hydrophilic and hydrophobic microdomain was introduced onto polypropylene (PP) nonwoven. The amphiphilic structure was constructed for the adsorption of bisphenol A (BPA). A solvent shielding experiment was conducted to calculate the contributions of diverse interactions. Also, a specific structure without hydrophilic microdomain was constructed as comparison to determine the adsorption rate and quantify the diffusion behaviors. On the basis of double-exponential model, the adsorption process can be distinctly divided into three stages, namely film diffusion stage, intralayer diffusion stage, and dynamic equilibrium stage. The adsorption rate was dramatically improved due to the influence of hydrophilic microdomain and participation of hydrogen bonding adsorption. Discussions on adsorption priority were also proposed. The results of surface energy heterogeneity revealed that the hydrophilic microdomain or the hydrogen bonding site was occupied preferentially.

PEI@SiO2: synthesis from diatomite and application for capturing phenolic compounds from aqueous solution

A PEI@SiO₂ hybrid composite was synthesized for sorption of phenolic compounds.