New methods for improved characterization of silica nanoparticle-based drug delivery systems

Surface chemistry of metal oxide nanoparticles: NMR and TGA quantification

Surface functionalization is widely used to control the behavior of nanomaterials for a range of applications. However, methods to accurately quantify surface functional groups and coatings are not yet routinely applied to nanomaterial characterization. We have employed a combination of quantitative NMR (qNMR) and thermogravimetric analysis (TGA) to address this problem for commercial cerium, nickel, and iron oxide nanoparticles (NPs) that have been modified to add functional coatings with (3-aminopropyl)triethoxysilane (APTES), stearic acid, and polyvinylpyrrolidone (PVP). The qNMR method involves quantification of material that is released from the NPs and quantified in the supernatant after removal of NPs. Removal of aminopropylsilanes was accomplished by basic hydrolysis whereas PVP and stearic acid were removed by ligand exchange using sodium hexametaphosphate and pentadecafluorooctanoic acid, respectively. The method accuracy was confirmed by analysis of NPs with a known content of surface groups. Complementary TGA studies were carried out in both air and argon atmosphere with FT-IR of evolved gases in argon to confirm the identity of the functional groups. TGA measurements for some unfunctionalized samples show mass loss due to unidentified components which makes quantification of functional groups in surface-modified samples less reliable. XPS provides information on the presence of surface contaminants and the level of surface hydroxylation for selected samples. Despite the issues associated with accurate quantification using TGA, the TGA estimates agree reasonably well with the qNMR data for samples with high surface loading. This study highlights the issues in analysis of commercial nanomaterials and is an advance towards the development of generally applicable methods for quantifying surface functional groups.

Nanotechnology-based advances in the efficient delivery of melatonin

N-[2-(5-methoxy-1H-indol-3-yl) ethyl] or simply melatonin is a biogenic amine produced by pineal gland and recently recognized various other organs. Because of a broad range of biological function melatonin is considered as a therapeutic agent with high efficacy in the treatment of multiple disorders, such as cancer, degenerative disorders and immune disease. However, since melatonin can affect receptors on the cellular membrane, in the nucleus and can act as an anti-oxidant molecule, some unwanted effects may be observed after administration. Therefore, the entrapment of melatonin in biocompatible, biodegradable and safe nano-delivery systems can prevent its degradation in circulation; decrease its toxicity with increased half-life, enhanced pharmacokinetic profile leading to improved patient compliance. Because of this, nanoparticles have been used to deliver melatonin in multiple studies, and the present article aims to cumulatively illustrate their findings.

Engineering of hybrid anticancer drug-loaded polymeric nanoparticles delivery system for the treatment and care of lung cancer therapy

Chemotherapy with combination drugs has become one of the most commonly used cancer prevention treatments, with positive clinical results. The goal of this study was to develop compostable polymeric nanomaterials (NMs) for the delivery of puerarin (PRN) and 5-fluorouracil (5FU), as well as to investigate the anticancer activity of the drug delivery system (PRN-5FU NMs) against in vitro and in vivo lung cancer cells. Since double antitumor drugs PRN and 5FU are insufficiently compressed in polymer-based bio-degradable nanoparticles, encapsulation of PRN and 5FU antitumor drugs were co-encapsulated with polyethylene glycol and polylactidecoglycolide nanoparticles (NMs) is efficient. The arrangement of PRN NMs, 5FU NMs, and PRN-5FU NMs, as well as the nanoparticles shape and scale, were studied using transmission electron microscopy (TEM). 5FU-PRN NMs triggered apoptosis in lung carcinoma cell lines such as HEL-299 and A549 in vitro. Acridine orange/ethidium bromide (AO/EB) and nuclear damaging staining techniques were used to observe morphologies and cell death. The mechanistic analysis of apoptosis was also confirmed by flow cytometry analysis using dual staining. When compared to free anticancer products, the hemolysis analysis findings of the 5FU-PRN NMs showed excellent biocompatibility. Taken together the advantages, this combination drug conveyance strategy exposed that 5FU-PRN NMs could have a significant promising to improve the effectiveness of lung cancer cells.

Co-drug delivery of regorafenib and cisplatin with amphiphilic copolymer nanoparticles: enhanced in vivo antitumor cancer therapy in nursing care

Cancers continue to be the second leading cause of death worldwide. Despite the development and improvement of surgery, chemotherapy and radiotherapy in cancer management, effective tumor ablation strategies are still in need due to high cancer patient mortality. Hence, we have established a new approach to achieve treatment-actuated modifications in a tumor microenvironment by using synergistic activity between two potential anticancer drugs. Dual drug delivery of Regorafenib (REGO) and Cisplatin (PT) exhibits a great anticancer potential, as REGO enhances the effect of PT treatment of human cells by providing stability of the microenvironment. However, encapsulation of REGO and PT fanatical by methoxypoly(ethylene glycol)-block-poly(D, L-lactic acid) (PEG-PLA in termed as NPs) is incompetent owing to unsuitability between the binary Free REGO and PT core and the polymeric system. Now, we display that PT can be prepared by hydrophobic coating of the dual drug centers with dioleoylphosphatidic acid (DOPA). The DOPA-covered PT can be co-encapsulated in PLGA NPs alongside REGO to stimulate excellent anticancer property. The occurrence of the PT suggestively enhanced the encapsulations of REGO into PLGA NPs (REGO-PT NPs). Further, the morphology of REGO NPs, PT NPs, and REGO-PT NPs and nanoparticle size was examined by transmission microscopy (TEM), respectively. Furthermore REGO-PT NPs induced significant apoptosis in human lung A549 and ovarian A2780 cancer cells by in vitro. The morphological observation and apoptosis were confirmed by the various biochemical assayes (AO-EB, Nuclear Staining and Annexin V-FITC). In a xenograft model of lung cancer, this nanotherapy shows a durable inhibition of tumor progression upon the administration of a tolerable dose. Our results suggest that a hydrophobic and highly toxic drug can be rationally converted into a pharmacologically efficient and self-deliverable nursing care of nanotherapy. Highlights Dual drug delivery of Regorafenib (REGO) and Cisplatin (PT) exhibits a great anticancer potential, as REGO enhances the effect of PT treatment of human cells by providing stability of the microenvironment. REGO-PT NPs induced significant apoptosis in human lung A549 and ovarian A2780 cancer cells by in vitro. The morphological observation and apoptosis were confirmed by the various biochemical assayes. In a xenograft model of lung cancer, this nanotherapy shows a durable inhibition of tumor progression upon the administration of a tolerable dose.

Combinational dual drug delivery system to enhance the care and treatment of gastric cancer patients

Gastric cancer is a frequently occurring cancer with high mortality each year worldwide. Finding new and effective therapeutic strategy against human gastric cancer is still urgently required. Hence, we have established a new method to achieve treatment-actuated modifications in a tumor microenvironment by utilizing synergistic activity between two potential anticancer drugs. Dual drug delivery of gemcitabine (GEM) and Camptothecin-11 (CPT-11) exhibits a great anti-cancer potential, as GEM enhances the effect of CPT-11 treatment of human gastric cells by providing microenvironment stability. However, encapsulation of GEM and CPT-11 obsessed by poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs) is incompetent owing to unsuitability between the binary free GEM and CPT-11 moieties and the polymeric system. Now, we display that CPT-11 can be prepared by hydrophobic covering of the drug centers with dioleoylphosphatidic acid (DOPA). The DOPA-covered CPT-11 can be co-encapsulated in PLGA NPs alongside GEM to stimulate excellent anticancer property. The occurrence of the CPT-11 suggestively enhanced the encapsulations of GEM into PLGA NPs (GEM-CPT-11 NPs). Formation of the nanocomposite (GEM-CPT-11 NPs) was confirmed by FTIR and X-ray spectroscopic techniques. Further, the morphology of GEM NPs, CPT-11 NPs, and GEM-CPT-11 NPs and NP size was examined by transmission electron microscopy (TEM), respectively. Furthermore, GEM-CPT-11 NPs induced significant apoptosis in human gastric NCI-N87 and SGC-791 cancer cells in vitro. The morphological observation and apoptosis were confirmed by the various biochemical assays (AO-EB, nuclear staining, and annexin V-FITC). In addition, evaluation of the hemolysis assay with erythrocytes of human shows excellent biocompatibility of free GEM, free CPT-11, GEM NPs, CPT-11 NPs, and GEM-CPT-11 NPs. The results suggest that GEM-CPT-11 NPs are one of the promising nursing cares for human gastric cancer therapeutic candidates worthy of further investigations.

A Multi-Method Approach for Quantification of Surface Coatings on Commercial Zinc Oxide Nanomaterials

Surface functionalization is a key factor for determining the performance of nanomaterials in a range of applications and their fate when released to the environment. Nevertheless, it is still relatively rare that surface groups or coatings are quantified using methods that have been carefully optimized and validated with a multi-method approach. We have quantified the surface groups on a set of commercial ZnO nanoparticles modified with three different reagents ((3-aminopropyl)-triethoxysilane, caprylsilane and stearic acid). This study used thermogravimetric analysis (TGA) with Fourier transform infrared spectroscopy (FT-IR) of evolved gases and quantitative solution 1H nuclear magnetic resonance (NMR) for quantification purposes with 13C-solid state NMR and X-ray photoelectron spectroscopy to confirm assignments. Unmodified materials from the same suppliers were examined to assess possible impurities and corrections. The results demonstrate that there are significant mass losses from the unmodified samples which are attributed to surface carbonates or residual materials from the synthetic procedure used. The surface modified materials show a characteristic loss of functional group between 300-600 °C as confirmed by analysis of FT-IR spectra and comparison to NMR data obtained after quantitative release/extraction of the functional group from the surface. The agreement between NMR and TGA estimates for surface loading is reasonably good for cases where the functional group accounts for a relatively large fraction of the sample mass (e.g., large groups or high loading). In other cases TGA does not have sufficient sensitivity for quantitative analysis, particularly when contaminants contribute to the TGA mass loss. X-ray photoelectron spectroscopy and solid state NMR for selected samples provide support for the assignment of both the functional groups and some impurities. The level of surface group loading varies significantly with supplier and even for different batches or sizes of nanoparticles from the same supplier. These results highlight the importance of developing reliable methods to detect and quantify surface functional groups and the importance of a multi-method approach.

Impact of Nano-Micronutrients as Foliar Fertilization on Yield and Quality of Sugar Beet Roots

BACKGROUND AND OBJECTIVE

Nanotechnology is one of the new technologies that entered almost all sides of our lives and were used in agriculture production. Nowadays, nanotechnology has expanded horizons in all fields of science. The study was aimed to investigate the response of yield and quality of sugar beet cv. Farida to foliar application of nano-microelements mixtures (Fe, Mn, Zn and B) with/without urea.

MATERIALS AND METHODS

Two field experiments were carried out in the experimental farm of the Etsa region in Fayoum Governorate, Egypt, during the two successive seasons (2015/16 and 2016/17). Fourteen treatments of four microelements as nano form sole and in combination with urea were applied and twelve traits were studied, growth traits, Juice quality traits and yield.

RESULTS

showed that the best results were found when sugar beet plants were treated with nano-microelements 200 mg L-1+ urea 1% and was ranked as the first favorable treatments for root length and diameter, dry matter per plant as root, top and sugar yields in both seasons, followed by the treatment of Nano-microelements 160 mg L-1+urea 1% for most of the traits studied. From the obtained results, Conclusion: it could be concluded that the application of nano-microelements 200 mg L-1+urea 1% treatment for significantly produced higher yields associated with improving the quality traits of sugar beet and saving the plants' needs from micronutrient and nitrogen fertilizers if this fertilizer rate has been added in the form of nanoparticles.

Quantification of surface functional groups on silica nanoparticles: comparison of thermogravimetric analysis and quantitative NMR

Thermogravimetric analysis (TGA) coupled with evolved gas analysis-FT-IR has been examined as a potential method to study the functional group content for surface modified silica nanoparticles. A comparison with a quantitative solution NMR method based on analysis of groups released after dissolution of the silica matrix is used to provide benchmark data for comparison and to assess the utility and limitations of TGA. This study focused primarily on commercially available silicas and tested whether it was possible to use a correction based on bare silica to account for the significant mass loss that occurs due to condensation of surface hydroxyl groups and loss of matrix-entrapped components at temperatures above ∼200 °C. Although this approach has been used successfully in the literature for in-house prepared samples, it was problematic for commercial silicas prepared by the Stöber method. For these materials the agreement between estimates from qNMR and TGA mass loss was poor in many cases. However much better agreement was observed for samples for which the mass loss above 200 °C is relatively low, such as non-porous silica, or samples for which the mass fraction of functional group is large (e.g., high molecule weight groups or multilayers). FT-IR was useful in identifying the likely structure of the components lost from the surface at various temperatures and in some cases provided evidence of contaminants in the sample. Nevertheless, in other cases correlation of thermograms and FT-IR with NMR data was necessary, particularly for samples where multi-step modification of the silica surface results in incomplete functionalization that gives a mixture of products. Overall the results indicate that TGA provides reliable results for silicas of low porosity or those for which the functional group accounts for a significant fraction of the total sample mass. It is also suitable as a supplementary or screening technique to indicate the presence of coatings or covalent surface modification, prior to applying other techniques or for routine analyses where sensitivity is not critical.

Quantification of amine functional groups on silica nanoparticles: a multi-method approach

Surface chemistry is an important factor for quality control during production of nanomaterials and for controlling their behavior in applications and when released into the environment. Here we report a comparison of four methods for quantifying amine functional groups on silica nanoparticles (NPs). Two colorimetric assays are examined, ninhydrin and 4-nitrobenzaldehyde, which are convenient for routine analysis and report on reagent accessible amines. Results from the study of a range of commercial NPs with different sizes and surface loadings show that the assays account for 50-100% of the total amine content, as determined by dissolution of NPs under basic conditions and quantification by solution-state ¹H NMR. To validate the surface quantification by the colorimetric assays, the NPs are modified with a trifluoromethylated benzaldehyde probe to enhance sensitivity for quantitative ¹⁹F solid state NMR and X-ray photoelectron spectroscopy (XPS). Good agreement between the assays and the determination from solid-state NMR is reinforced by elemental ratios from XPS, which indicate that in most cases the difference between total and accessible amine content reflects amines that are outside the depth probed by XPS. Overall the combined results serve to validate the relatively simple colorimetric assays and indicate that the reactions are efficient at quantifying surface amines, by contrast to some other covalent modifications that have been employed for functional group quantification.

Delivery of Doxorubicin Using Double-Layered Core-Shell Nanocarrier Based on Magnetic Fe3O4 Core and Salep Shells

Herein, we developed a magnetic drug delivery system based on magnetic Fe₃O₄ nanoparticles with double shells of modified salep polysaccharide for the delivery of doxorubicin (Dox). The drug-loaded nanocarrier was synthesized in an easy way, and large amounts of drug molecules were loaded into the nanocarrier. The drug-loaded nanocarrier showed excellent pH responsibility in vitro, and large amounts of Dox were released at lower pH (60% release), whereas the nanocarrier was stable at neutral pH. The hemolysis assay results showed that the nanocarrier has negligible hemolytic effects on human red blood cells and showed good biocompatibility. Moreover, the result of coagulation assays showed that the nanocarrier was not active in any coagulation pathways. Cytotoxicity assays of nanocarrier and drug-loaded nanocarrier toward HeLa cells demonstrated that the nanocarrier has negligible toxicity, whereas the drug-loaded nanocarrier kills more than 90% of cells during 48 h. The flow cytometry analysis also showed that the uptake of drug-loaded nanocarrier into the cancerous cells is time-dependent and higher concentrations of drug internalized into the cells at longer incubation time. On the basis of the results, we suggest that the present nanocarrier can be applicable for in vivo drug delivery as an easy-made and cheap nanocarrier.

BSA-coated fluorescent organic–inorganic hybrid silica nanoparticles: preparation and drug delivery

A novel BSA-coated inorganic–organic hybrid nano-material with drug delivery ability under stimulation by temperature changes is reported.

Amino acid-based anti-fouling functionalization of silica nanoparticles using divinyl sulfone

Natural amino acids are zwitterionic molecules and the good biocompatibility promises them potential candidates as anti-fouling materials. Here, we developed a new method to functionalize silica nanoparticles with a natural amino acid-based anti-fouling layer. Amino acids were covalently immobilized on 3-aminopropyltriethoxysilane modified silica nanoparticles using divinyl sulfone through a two-step reaction in aqueous solution at room temperature. The progress was monitored with NMR, X-ray photoelectron spectroscopy (XPS), transmission electron microscope (TEM) and zeta potential measurements. A library of amino acids was screened and the nonspecific protein adsorption of bovine serum albumin (BSA) and fetal bovine serum (FBS) were investigated using dynamic light scattering method. The results showed that cysteine, lysine and arginine functionalized silica nanoparticles can effectively resist protein adsorption due to the zwitterionic structure. Among them, lysine functionalized silica nanoparticles had the best anti-fouling performance, which showed hydrodynamic diameter increases of only 10% after incubated in BSA solution and 20% after incubated in FBS solution for 24h. The neat aqueous modification process can conveniently create a thin zwitterionic layer on silica particles, and it has a great potential in biomolecule immobilization and biofunctional surface preparation.

STATEMENT OF SIGNIFICANCE

Zwitterionic polymer is an outstanding class of anti-fouling material; but the difficulty in synthesis is challenging its spread utilization. In this study, we developed a new method to create an amino acid-based zwitterionic layer on APTES functionalized silica nanoparticles through a two-step reaction in aqueous solution at room temperature. The surface chemistry was monitored with NMR, XPS, TEM and zeta potential measurements. With this method, a library of amino acid conjugated-silica nanoparticles was synthesized and their anti-fouling performance was evaluated using dynamic light scattering method. The results showed that the cysteine, lysine and arginine conjugated nanoparticles all can effectively resist nonspecific protein adsorption. Among them, lysine conjugated nanoparticles show the best anti-fouling performance, which showed hydrodynamic diameter increases of only 10% after incubated in BSA solution and 20% after incubated in FBS solution for 24 hours. These results indicates that the anti-fouling silica nanoparticles are of great potential in many biomedical applications, especially biosensing and diagnose imaging. The modification reactions in aqueous solution at room temperature are easily conducted in laboratory, indicating high potential in the functionalization of silica particles/surfaces with other biomolecules.

Surface Analysis of Gold Nanoparticles Functionalized with Thiol-Modified Glucose SAMs for Biosensor Applications

In this work, Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS), Principal Component Analysis (PCA) and X-ray Photoelectron Spectroscopy (XPS) have been used to characterize the surface chemistry of gold substrates before and after functionalization with thiol-modified glucose self-assembled monolayers and subsequent biochemical specific recognition of maltose binding protein (MBP). The results indicate that the surface functionalization is achieved both on flat and nanoparticles gold substrates thus showing the potential of the developed system as biodetection platform. Moreover, the method presented here has been found to be a sound and valid approach to characterize the surface chemistry of nanoparticles functionalized with large molecules. Both techniques were proved to be very useful tools for monitoring all the functionalization steps, including the investigation of the biological behavior of the glucose-modified particles in the presence of the maltose binding protein.

Bioinspired Oil Core/Silica Shell Nanocarriers with Tunable and Multimodal Functionalities

The application of multimodal systems in the field of nanomedicine is advantageous as they can perform two or more tasks simultaneously. Here a robust approach is presented mimicking biogenic silica to design a multilayered nanocarrier system with a central oil core encapsulated within a polymer-silica shell. The outermost silica shell has been deposited through a biosilicification process induced by poly-L-lysine molecules immobilized on the surface of emulsion droplets. This system can be simultaneously loaded with high amount of hydrophobic molecules or contrasting agents in the inner oil core, while the polymeric-silica layers can be easily tagged with at least two different contrasting agents. Additionally, the zwitterionic nature of the silica precipitating peptide (poly-L-lysine) has been efficiently exploited to modulate and entirely reverse the surface charge of the nanocarrier without using any additional coating material. It has been demonstrated experimentally that the designed nanocapsular system is monodisperse, nontoxic, cargo protective, tunable in thickness, fluorescent, and magnetic resonance imaging (MRI) active so highly versatile for multiple applications in the field of drug delivery and in vivo imaging.

Potentials of engineered nanoparticles as fertilizers for increasing agronomic productions

Development and application of new types of fertilizers using innovative nanotechnology are one of the potentially effective options of significantly enhancing the global agricultural productions needed to meet the future demands of the growing population. Indeed, the review of available literature indicates that some engineered nanomaterials can enhance plant-growth in certain concentration ranges and could be used as nanofertilizers in agriculture to increase agronomic yields of crops and/or minimize environmental pollution. This article summarizes this type of nanomaterials under four categories: macronutrient nanofertilizers, micronutrient nanofertilizers, nutrient-loaded nanofertilizers, and plant-growth-enhancing nanomaterials. Each category is discussed respectively with reference to nanomaterials' chemical composition, particle size, concentrations applied, benefited plant species, plant incubation methods, and plant-growth enhancement aspects and the rates. The importance, research directions, and research requirements of each nanofertilizer category for achieving sustainable agriculture are also specifically examined. Finally, this review suggests that development of N and P macronutrient nanofertilizers is a high research and development priority both for food production and environmental protection.

Esterase- and pH-responsive poly(β-amino ester)-capped mesoporous silica nanoparticles for drug delivery

Gating of mesoporous silica nanoparticles (MSNs) with the stimuli-responsive poly(β-amino ester) has been achieved. This hybrid nanocarrier releases doxorubicin (DOX) under acidic conditions or in the presence of porcine liver esterase. The DOX loaded poly(β-amino ester)-capped MSNs reduce cell viability when tested on MDA-MB-231 human breast cancer cells.

γ-PGA-coated mesoporous silica nanoparticles with covalently attached prodrugs for enhanced cellular uptake and intracellular GSH-responsive release

Poor cellular uptake of drug delivery carriers and uncontrolled drug release remain to be the major obstacles in cancer therapy due to their low delivery efficiency. In this study, a multifunctional intracellular GSH (glutathione)-responsive silica-based drug delivery system with enhanced cellular uptake capability is developed. Uniform 50 nm colloidal mesoporous silica nanoparticles (MSNs) with mercaptopropyl-functionalized core and silanol-contained silica surface (MSNs-SHin ) are designed and fabricated as a platform for drug covalent attachment and particle surface modification. Doxorubicin (DOX) with primary amine group as an anticancer model drug is covalently conjugated to the mesopores of MSNs-SHin via disulfide bonds in the presence of a heterobifunctional linker (N-Succinimidyl 3-(2-pyridyldithio) propionate). Poly(γ-glutamic acid) (γ-PGA) can be coated onto the particle surface by sequential electrostatic adsorption of polyethyleneimine (PEI) and γ-PGA. The constructed delivery system exhibits enhanced cellular uptake via a speculated γ-glutamyl transpeptidase (GGT)-mediated endocytosis pathway and controlled drug release capacity via intracellular GSH-responsive disulfide-bond cleavage, and thus significantly inhibits the growth of cancer cells. The multifunctional delivery system paves a new way for developing high-efficient particle-based nanotherapeutic approach for cancer treatment.

Sugar and pH dual-responsive mesoporous silica nanocontainers based on competitive binding mechanisms

A sugar and pH dual-responsive controlled release system, which is highly specific towards molecular stimuli, has been developed based on the binding between catechol and boronic acid on a platform of mesoporous silica nanoparticles (MSNs). By grafting phenylboronic acid stalks onto the silica surface, catechol-containing β-cyclodextrins can be attached to the orifices of the MSNs' nanopores through formation of boronate esters which block access to the nanopores. These esters are stable enough to prevent cargo molecules from escaping. The boronate esters disassociate in the presence of sugars, enabling the molecule-specific controlled-release feature of this hybrid system. The rate of release has been found to be tunable by varying both the structures and the concentrations of sugars, as a result of the competitive binding nature associated with the mechanism of its operation. Acidification also induces the release of cargo molecules. Further investigations show that the presence of both a low pH and sugar molecules provides cooperative effects which together control the rate of release.

Continuous polymer nanocoating on silica nanoparticles

Continuous polymer coating of nanoparticles is of interest in many industries such as pharmaceuticals, cosmetics, food, and electronics. Here we introduce a polymer coating/precipitation technique to achieve a uniform and controllable nanosize polymer coating on nanoparticles in a continuous manner. The utility of this technique is demonstrated by coating Aerosil silica nanoparticles (SNPs) of diameter 12 nm with the polymer Eudragit RL 100. Both hydrophilic and hydrophobic SNPs were successfully coated. After determining the cloud point of an acetone solution of the polymer containing a controlled amount of the nonsolvent water, the solid hollow fiber cooling crystallization (SHFCC) technique was employed to continuously coat SNPs with the polymer. A suspension of the SNPs in an acetone-water solution of the polymer containing a surfactant was pumped through the lumen of solid polypropylene hollow fibers in a SHFCC device; cold liquid was circulated on the shell side. Because of rapid cooling-induced supersaturation and heterogeneous nucleation, precipitated polymers will coat the nanoparticles. The thickness and morphology of the nanocoating and the particle size distribution of the coated SNPs were analyzed by scanning transmission electron microscopy (STEM) with electron energy loss spectroscopy (EELS), thermogravimetric analysis (TGA), and dynamic light scattering (DLS). Results indicate that uniformly polymer-coated SNPs can be obtained from the SHFCC device after suitable post-treatments. The technique is also easily scalable by increasing the number of hollow fibers in the SHFCC device.

Tailored silica-antibiotic nanoparticles: overcoming bacterial resistance with low cytotoxicity

New and more aggressive antibiotic resistant bacteria arise at an alarming rate and represent an ever-growing challenge to global health care systems. Consequently, the development of new antimicrobial agents is required to overcome the inefficiency of conventional antibiotics and bypass treatment limitations related to these pathologies. In this study, we present a synthesis protocol, which was able to entrap tetracycline antibiotic into silica nanospheres. Bactericidal efficacy of these structures was tested against bacteria that were susceptible and resistant to antibiotics. For nonresistant bacteria, our composite had bactericidal efficiency comparable to that of free-tetracycline. On the other hand, the synthesized composites were able to avoid bacterial growth of resistant bacteria while free-tetracycline has shown no significant bactericidal effect. Finally, we have investigated the cytotoxicity of these nanoparticles against mammalian cells to check any possible poisoning effect. It was found that these nanospheres are not apoptosis-inducers and only a reduction on the cell replication rate was seen when compared to the control without nanoparticles.