In situ non-DLVO stabilization of surfactant-free, plasmonic gold nanoparticles: effect of Hofmeister's anions

Release of ions enhanced the antibacterial performance of laser-generated, uncoated Ag nanoparticles

Identifying the antibacterial mechanisms of elemental silver at the nanoscale remains a significant challenge due to the intertwining behaviors between the particles and their released ions. The open question is which of the above factor dominate the antibacterial behaviors when silver nanoparticles (Ag NPs) with different sizes. Considering the high reactivity of Ag NPs, prior research has primarily concentrated on coated particles, which inevitably hinder the release of Ag+ ions due to additional chemical agents. In this study, we synthesized various Ag NPs, both coated and uncoated, using the laser ablation in liquids (LAL) technique. By analyzing both the changes in particle size and Ag+ ions release, the impacts of various Ag NPs on the cellular activity and morphological changes of gram-negative (E. coil) and gram-positive (S. aureus) bacteria were evaluated. Our findings revealed that for uncoated Ag NPs, smaller particles exhibited greater ions release efficiency and enhanced antibacterial efficacy. Specifically, particles approximately 1.5 nm in size released up to 55 % of their Ag+ ions within 4 h, significantly inhibiting bacterial growth. Additionally, larger particles tended to aggregate on the bacterial cell membrane surface, whereas smaller particles were more likely to be internalized by the bacteria. Notably, treatment with smaller Ag NPs led to more pronounced bacterial morphological changes and elevated levels of intracellular reactive oxygen species (ROS). We proposed that the bactericidal activity of Ag NPs stems from the synergistic effect between particle-cell interaction and the ionic silver, which is dependent on the crucial parameter of particle size.

Stability and SERS signal strength of laser-generated gold, silver, and bimetallic nanoparticles at different KCl concentrations

Noble metal nanoparticles, specifically gold and silver, are extensively utilized in sensors, catalysts, surface-enhanced Raman scattering (SERS), and optical-electronic components due to their unique localized surface plasmon resonance (LSPR) properties. The production of these nanoparticles involves various methods, but among the environmentally friendly approaches, laser ablation stands out as it eliminates the need for toxic chemicals during purification. However, nanoparticle aggregation poses a challenge in laser ablation, necessitating the addition of extra materials that contaminate the otherwise clean process. In this study, we investigate the effectiveness of a biocompatible material, potassium chloride (KCl), in preventing particle aggregation. Although salt is known to trigger aggregation, we observed that certain concentrations of KCl can slow down this process. Over an eight-week period, we examined the aggregation rate, extinction behavior, and stability of gold, silver, and hybrid nanoparticles generated in different KCl concentrations. Extinction spectra, SEM images, SERS signal strength, and zeta potential were analyzed. Our results demonstrate that laser ablation in water and salt solutions yields nanoparticles with a spherical shape and a negative zeta potential. Importantly, we identified the optimal concentration of potassium chloride salt that maintains solution stability and SERS signal strength. Adsorbed chloride ions on silver nanoparticles were evidenced by low-frequency SERS band near 242 cm-1. A better understanding of the effect of KCl concentration on the properties of noble metal nanoparticles can lead to improved generation protocols and the development of tailored nanoparticle systems with enhanced stability and SERS activity.

Laser synthesis of nanoparticles in organic solvents - products, reactions, and perspectives

Laser synthesis and processing of colloids (LSPC) is an established method for producing functional and durable nanomaterials and catalysts in virtually any liquid of choice. While the redox reactions during laser synthesis in water are fairly well understood, the corresponding reactions in organic liquids remain elusive, particularly because of the much greater complexity of carbon chemistry. To this end, this article first reviews the knowledge base of chemical reactions during LSPC and then deduces identifiable reaction pathways and mechanisms. This review also includes findings that are specific to the LSPC method variants laser ablation (LAL), fragmentation (LFL), melting (LML), and reduction (LRL) in organic liquids. A particular focus will be set on permanent gases, liquid hydrocarbons, and solid, carbonaceous species generated, including the formation of doped, compounded, and encapsulated nanoparticles. It will be shown how the choice of solvent, synthesis method, and laser parameters influence the nanostructure formation as well as the amount and chain length of the generated polyyne by-products. Finally, theoretical approaches to address the mechanisms of organic liquid decomposition and carbon shell formation are highlighted and discussed regarding current challenges and future perspectives of LSPC using organic liquids instead of water.

Anti-biofilm properties of laser-synthesized, ultrapure silver-gold-alloy nanoparticles against Staphylococcus aureus

Staphylococcus aureus biofilm-associated infections are a common complication in modern medicine. Due to inherent resilience of biofilms to antibiotics and the rising number of antibiotic-resistant bacterial strains, new treatment options are required. For this purpose, ultrapure, spherical silver-gold-alloy nanoparticles with homogenous elemental distribution were synthesized by laser ablation in liquids and analyzed for their antibacterial activity on different stages of S. aureus biofilm formation as well as for different viability parameters. First, the effect of nanoparticles against planktonic bacteria was tested with metabolic activity measurements. Next, nanoparticles were incubated with differently matured S. aureus biofilms, which were then analyzed by metabolic activity measurements and three dimensional live/dead fluorescent staining to determine biofilm volume and membrane integrity. It could be shown that AgAu NPs exhibit antibacterial properties against planktonic bacteria but also against early-stage and even mature biofilms, with a complete diffusion through the biofilm matrix. Furthermore, AgAu NPs primarily targeted metabolic activity, to a smaller extend membrane integrity, but not the biofilm volume. Additional molecular analyses using qRT-PCR confirmed the influence on different metabolic pathways, like glycolysis, stress response and biofilm formation. As this shows clear similarities to the mechanism of pure silver ions, the results strengthen silver ions to be the major antibacterial agent of the synthesized nanoparticles. In summary, the results of this study provide initial evidence of promising anti-biofilm characteristics of silver-gold-alloy nanoparticles and support the importance of further translation-oriented analyses in the future.

Hofmeister Effects Shine in Nanoscience

Hofmeister effects play a crucial role in nanoscience by affecting the physicochemical and biochemical processes. Thus far, numerous wonderful applications from various aspects of nanoscience have been developed based on the mechanism of Hofmeister effects, such as hydrogel/aerogel engineering, battery design, nanosynthesis, nanomotors, ion sensors, supramolecular chemistry, colloid and interface science, nanomedicine, and transport behaviors, etc. In this review, for the first time, the progress of applying Hofmeister effects is systematically introduced and summarized in nanoscience. It is aimed to provide a comprehensive guideline for future researchers to design more useful Hofmeister effects-based nanosystems.

Visual demonstration and prediction of the Hofmeister series based on a poly(ionic liquid) photonic array

The Hofmeister effect and associated Hofmeister series (HS) are ubiquitous in physicochemical phenomena and have demonstrated fundamental importance in a myriad of fields ranging from chemistry to biology. Visualization of the HS not only helps to straightforwardly understand the underpinning mechanism, but also enables the prediction of new ion positions in the HS and directs the applications of the Hofmeister effect. Owing to the difficulties of sensing and reporting complete multiple and subtle inter- and intramolecular interactions involved in the Hofmeister effect, facile and accurate visual demonstration and prediction of the HS remain highly challenging. Herein, a poly(ionic liquid) (PIL)-based photonic array containing 6 inverse opal microspheres was rationally constructed to efficiently sense and report the ion effects of the HS. The PILs can not only directly conjugate with HS ions due to their ion-exchange properties, but also provide sufficient noncovalent binding diversity with these ions. Meanwhile, subtle PIL-ion interactions can be sensitively amplified to optical signals owing to their photonic structures. Therefore, synergistic integration of PILs and photonic structures gives rise to accurate visualization of the ion effect of the HS, as demonstrated by correctly ranking 7 common anions. More importantly, assisted by principal component analysis (PCA), the developed PIL photonic array can serve as a general platform to facilely, accurately, and robustly predict the HS positions of an unprecedented amount of important and useful anions and cations. These findings indicate that the PIL photonic platform is very promising for addressing challenges in the visual demonstration and prediction of HS and promoting a molecular-level understanding of the Hoffmeister effect.

Development of a coarse-grained model for surface-functionalized gold nanoparticles: towards an accurate description of their aggregation behavior

Understanding the dispersion stability and aggregation propensity of self-assembled monolayer gold NPs at a molecular level is crucial to guide their rational design and to inform about the optimal surface functionalization for specific applications. To reach this goal, in silico modeling via coarse-grained (CG) molecular dynamics (MD) simulations is a fundamental tool to complement the information acquired from experimental studies since CG modeling allows to get a deep knowledge of the molecular interactions that take place at the nanoscale in this kind of systems. Unfortunately, current CG models of monolayer-protected AuNPs present several drawbacks that limit their accuracy in certain scenarios. We here develop a CG model that is fully compatible and extends the SPICA/SDK (Shinoda-DeVane-Klein) force field. Our model allows reproducing the behavior of AuNPs functionalized with hydrophobic as well as charged and more hydrophilic ligands. This model improves upon results obtained with previously derived CG force fields and successfully describes NPs aggregation and self-assembly in aqueous solution.

On the Importance of Fresh Stock Solutions for Surfactant-Free Colloidal Syntheses of Gold Nanoparticles in Alkaline Alcohol and Water Mixtures

A room temperature surfactant-free synthesis of gold nanoparticles in the size range 10–20 nm that only requires HAuCl4 as the precursor, NaOH as the base, water as the solvent and a mono-alcohol such as methanol or ethanol as the reducing agent, has recently been detailed. This approach is promisingly simple to obtain colloids stable for months. Here, it is shown that the use of fresh stock solutions of base is one key to ensure the formation of stable surfactant-free small-sized gold nanoparticles. The need for relatively freshly prepared stock solutions of base does not appear to be as crucial for syntheses using stabilizers and/or viscous solvents such as glycerol. The possibly overlooked importance of the age of the stock solution of base might account for the limited interest to date for the simple room temperature synthesis in low viscosity mono-alcohols highlighted.

Surfactant-Free Colloidal Syntheses of Gold-Based Nanomaterials in Alkaline Water and Mono-alcohol Mixtures

Gold nanoparticles (Au NPs) and gold-based nanomaterials combine unique properties relevant for medicine, imaging, optics, sensing, catalysis, and energy conversion. While the Turkevich-Frens and Brust-Schiffrin methods remain the state-of-the-art colloidal syntheses of Au NPs, there is a need for more sustainable and tractable synthetic strategies leading to new model systems. In particular, stabilizers are almost systematically used in colloidal syntheses, but they can be detrimental for fundamental and applied studies. Here, a surfactant-free synthesis of size-controlled colloidal Au NPs stable for months is achieved by the simple reduction of HAuCl₄ at room temperature in alkaline solutions of low-viscosity mono-alcohols such as ethanol or methanol and water, without the need for any other additives. Palladium (Pd) and bimetallic Au _x Pd _y NPs, nanocomposites and multimetallic samples, are also obtained and are readily active (electro)catalysts. The multiple benefits over the state-of-the-art syntheses that this simple synthesis bears for fundamental and applied research are highlighted.

Disproportional surface segregation in ligand-free gold-silver alloy solid solution nanoparticles, and its implication for catalysis and biomedicine

Catalytic activity and toxicity of mixed-metal nanoparticles have been shown to correlate and are known to be dependent on surface composition. The surface chemistry of the fully inorganic, ligand-free silver-gold alloy nanoparticle molar fraction series, is highly interesting for applications in heterogeneous catalysis, which is determined by active surface sites which are also relevant for understanding their dissolution behavior in biomedically-relevant ion-release scenarios. However, such information has never been systematically obtained for colloidal nanoparticles without organic surface ligands and has to date, not been analyzed in a surface-normalized manner to exclude density effects. For this, we used detailed electrochemical measurements based on cyclic voltammetry to systematically analyze the redox chemistry of particle-surface-normalized gold-silver alloy nanoparticles with varying gold molar fractions. The study addressed a broad range of gold molar fractions (Ag₉₀Au₁₀, Ag₈₀Au₂₀, Ag₇₀Au₃₀, Ag₅₀Au₅₀, Ag₄₀Au₆₀, and Ag₂₀Au₈₀) as well as monometallic Ag and Au nanoparticle controls. Oxygen reduction reaction (ORR) measurements in O₂ saturated 0.1 M KOH revealed a linear reduction of the overpotential with increasing gold content on the surface, probably attributed to the higher ORR activity of gold over silver, verified by monometallic Ag and Au controls. These findings were complemented by detailed XPS studies revealing an accumulation of the minor constituent of the alloy on the surface, e.g., silver surface enrichment in gold-rich particles. Furthermore, highly oxidized Ag surface site enrichment was detected after the ORR reaction, most pronounced in gold-rich alloys. Further, detailed CV studies at acidic pH, analyzing the position, onset potential, and peak integrals of silver oxidation and silver reduction peaks revealed particularly low reactivity and high chemical stability of the equimolar Au₅₀Ag₅₀ composition, a phenomenon attributed to the outstanding thermodynamic, entropically driven, stabilization arising at this composition.

Impact of Sterilization on the Colloidal Stability of Ligand-Free Gold Nanoparticles for Biomedical Applications

Sterilization is a major prerequisite for the utilization of nanoparticle colloids in biomedicine, a process well examined for particles derived from chemical synthesis although highly underexplored for electrostatically stabilized ligand-free gold nanoparticles (AuNPs). Hence, in this work, we comprehensively examined and compared the physicochemical characteristics of laser-generated ligand-free colloidal AuNPs exposed to steam sterilization and sterile filtration as a function of particle size and mass concentration and obtained physicochemical insight into particle growth processes. These particles exhibit long-term colloidal stability (up to 3 months) derived from electrostatic stabilization without using any ligands or surfactants. We show that particle growth attributed to cluster-based ripening occurs in smaller AuNPs (∼5 nm) following autoclaving, while larger particles (∼10 and ∼30 nm) remain stable. Sterile filtration, as an alternative effective sterilizing approach, has no substantial impact on the colloidal stability of AuNPs, regardless of particle size, although a mass loss of 5-10% is observed. Finally, we evaluated the impact of the sterilization procedures on potential particle functionality in proton therapy, using the formation of reactive oxygen species (ROS) as a readout. In particular, 5 nm AuNPs exhibit a significant loss in activity upon autoclaving, probably dedicated to specific surface area reduction and surface restructuring during particle growth. The filtered analog enhanced the ROS release by up to a factor of ∼2.0, at 30 ppm gold concentration. Our findings highlight the need for carefully adapting the sterilization procedure of ligand-free NPs to the desired biomedical application with special emphasis on particle size and concentration.

Monovalent ion-mediated charge-charge interactions drive aggregation of surface-functionalized gold nanoparticles

Monolayer-protected metal nanoparticles (NPs) are not only promising materials with a wide range of potential industrial and biological applications, but they are also a powerful tool to investigate the behaviour of matter at nanoscopic scales, including the stability of dispersions and colloidal systems. This stability is dependent on a delicate balance between attractive and repulsive interactions that occur in the solution, and it is described in quantitative terms by the classic Derjaguin-Landau-Vewey-Overbeek (DLVO) theory, that posits that aggregation between NPs is driven by van der Waals interactions and opposed by electrostatic interactions. To investigate the limits of this theory at the nanoscale, where the continuum assumptions required by the DLVO theory break down, here we investigate NP dimerization by computing the Potential of Mean Force (PMF) of this process using fully atomistic MD simulations. Serendipitously, we find that electrostatic interactions can lead to the formation of metastable NP dimers at physiological ion concentrations. These dimers are stabilized by complexes formed by negatively charged ligands belonging to distinct NPs that are bridged by positively charged monovalent ions present in solution. We validate our findings by collecting tomographic EM images of NPs in solution and by quantifying their radial distribution function, that shows a marked peak at interparticle distance comparable with that of MD simulations. Taken together, our results suggest that not only van der Waals interactions, but also electrostatic interactions mediated by monovalent ions at physiological concentrations, contribute to attraction between nano-sized charged objects at very short length scales.

Room-Temperature Annealing-Free Gold Printing via Anion-Assisted Photochemical Deposition

Metal patterning via additive manufacturing has been phasing-in to broad applications in many medical, electronics, aerospace, and automotive industries. While previous efforts have produced various promising metal-patterning strategies, their complexity and high cost have limited their practical application in rapid production and prototyping. Herein, a one-step gold printing technique based on anion-assisted photochemical deposition (APD), which can directly print highly conductive gold patterns (1.08 × 107 S m-1 ) under ambient conditions without post-annealing treatment, is introduced. Uniquely, the APD uses specific ion effects with projection lithography to pattern Au nanoparticles and simultaneously sinter them into tunable porous gold structures. The significant influence of kosmotropic or chaotropic anions in the precursor ink on tuning the morphologies and conductivities of the printed patterns by employing a series of different ions, including Cl- ions, in the printing process is presented. Additionally, the resistance stabilities and the electrochemical properties of the APD-printed gold patterns are carefully investigated. The high conductivity and excellent conformability of the printed Au electrodes are demonstrated with reliable performance in electrophysiological signal delivery and acquisition for biomedical applications. This work exploits the potential of photochemical-deposition-based metal patterning in flexible electronic manufacturing.

Photoluminescent neodymium-doped ZnO nanocrystals prepared by laser ablation in solution for NIR-II fluorescence bioimaging

The work reports on the use of laser ablation and post-ablation irradiation techniques for the preparation Nd3+ doped ZnO nanoparticles (NPs). The focus has been made on photoluminescence of Nd-doped ZnO NPs in the second near infrared (NIR-II) spectral window (1000-1700 nm) of the biological transparency. Morphology, phase composition and optical properties of the synthesized NPs were studied by absorption and photoluminescence spectroscopy, X-Ray diffraction (XRD) and transmission (TEM) electron microscopy. Near-infrared luminescence of Nd3+ doped ZnO nanocrystals in the region of 1000-1400 nm was detected both upon excitation from the ground state (800 nm) and upon UV excitation. The latter proves the incorporation of the Nd3+ into ZnO lattice as photoluminescence occurs through the transfer of excitation energy from the ZnO matrix to the Nd3+ ion. The possibility of control over the luminescence properties by a variation of solvent composition and by additional laser irradiation was demonstrated.

The Ionic Composition and Chemistry of Nanopore-Confined Solutions

There is increasing interest in understanding the properties of solutions confined within nanotubes and synthetic or biological nanopores. How the ionic content of a nanopore-confined solution differs from that of a contacting bulk salt solution is of particular importance, for example, to water desalinization, industrial electrolysis, and all living systems. This paper explores ionic content, ionic interactions, and ion-transport properties of solutions confined within the 10 nm diameter pores of a synthetic polymer membrane. The membrane has a fixed negative pore-wall and surface charge due to ionizable carbonate groups. As a result, under some conditions, the nanopore-confined solution contains only cations and no anions or salt present in a contacting solution, ideal cation permselectivity. This anion- and salt-rejecting ability varies greatly with the cation of the salt, a result that is in contradiction to the prevailing model for permselectivity in nanopores. The extant model fails because it does not account for specific chemical interactions between the cation and the carbonate groups. The nature of these ion-selective interactions is discussed here.

Glucosamine to gold nanoparticles binding studied using Raman spectroscopy

The binding of glucosamine to gold in water solutions of glucosamine hydrochloride mixed with clean colloidal gold nanoparticles obtained by laser ablation in liquid was studied using surface-enhanced Raman scattering (SERS), dynamic light scattering (DLS) and UV-VIS spectroscopy. The purpose of this study was to establish whether the binding of charged aminogroup to gold nanoparticles (AuNPs) is taking place, and if it does, how can it be identified by means of SERS. The average size of dried gold nanoparticles was (20 ± 4) nm determined by averaging the sizes observed in transmission electron microscopy micrographs, which is smaller than the average size of gold nanoparticles in water solution as determined by DLS: (52 ± 2) nm. Upon adding the glucosamine solutions to gold colloid, average hydrodynamic diameter of ions was slightly larger for 0.1 mM glucosamine solution (55 ± 2 nm), while it increased to (105 ± 22) nm in the case of 1 mM solution, and was (398 ± 54) nm when 10 mM glucosamine solution was added. Most prominent Raman bands observed both for 0.1 mM and 1 mM glucosamine solutions were located at 1165 cm^-1, 1532 and 1586 cm^-1 and assigned to C-N coupled with C-C stretching, and C-NH₃⁺ deformation angles bending. In SERS spectrum of 1 mM GlcN⁺ solution, two strong bands at 999 and 1075 cm^-1 were found and attributed to C-O_ring stretching coupled with C-NH₃⁺ bending (999 cm^-1) and to dominantly C-O stretching vibration. The differences in SERS spectra are attributed to different number of glucosamine molecules that attach to gold nanoparticles and their orientation with respect to the metal particle surface, partly due to presence of beta anomers protonated at anomeric oxygen position. The assignment of glucosamine bands was further corroborated by comparison with vibrational spectra of alpha and beta glucose and of polycrystalline powder of glucosamine hydrochloride. For all three substances comprehensive calculation of vibrational density of states was conducted using density functional theory. Benchmark bands for polycrystalline glucose anomers distinction are 846 and 915 cm^-1 for alpha glucose, and 902 cm^-1 for beta glucose. However, the bands observed in SERS spectra of 0.1 mM glucosamine solution at 831, 899, and 946 cm^-1 or in 1 mM solution at 934 cm^-1 cannot be easily identified as belonging either to alpha or beta glucosamine anomer, due to complexity of atomic motions involved. The identification of vibrational bands associated with -CNH₃⁺ group will aid SERS studies on amino acids, especially in cases when several atomic groups could possibly bind to AuNPs.

Influence of Gold/Silver Ratio in Ablative Nanoparticles on Their Interaction with Aptamers and Functionality of the Obtained Conjugates

Nano-bio-conjugates, featuring noble metal gold-silver alloy nanoparticles, represent a versatile tool in diagnostics and therapeutics due to their plasmonic and antimicrobial properties tunable by the particle's gold molar fraction. However, little is known about how the binding of thiolated biomolecules to noble metal nanoparticles is influenced by the fraction of gold and silver atoms on the nanoparticle's surface and to which extend this would affect the functionality of the conjugated biomolecules. In this work, we generated gold-silver alloy nanoparticles with average diameters of 7-8 nm using the modern, surfactant-free laser ablation in liquids (LAL) synthesis approach. We conjugated them with thiolated miniStrep aptamer ligands at well-controlled aptamer-to-nanoparticle surface area ratios with maxima between 12 and 27 pmol aptamer/cm2 particle surface area. The results revealed a clear correlation between surface coverage and the nanoparticles' nominal gold/silver ratio, with maximum coverage reached for gold-rich alloys and a pronounced maximum for silver-rich alloys. However, the conjugates' functionality, evaluated by binding of streptavidin, was surprisingly robust and hardly affected by the nominal composition. However, 1.5 times higher surface coverage was needed to obtain maximum functionality in the silver-rich conjugates. Based on these results, it may be concluded that the nominal composition of gold-silver alloy nano-bioconjugates is freely tunable without a pronounced impact on the attached ligands' functionality, a finding highly relevant for the flexible design of nano-bio-conjugates for future biomedical applications. This study's results may facilitate the design of alloy nano-bio-conjugates for future applications in therapeutics and diagnostics.

Combined Small-Angle Neutron Scattering/Small-Angle X-ray Scattering Analysis for the Characterization of Silver Nanoparticles Prepared via Photoreduction in Water-in-Oil Microemulsions

In this study, we used small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) to investigate the formation process of silver (Ag) nanoparticles (NPs) in water-in-oil (w/o) reverse microemulsions comprising sodium bis(2-ethylhexyl) sulfosuccinate (AOT), water, and organic solvents (such as benzene, octane, and decane) by the photoreduction of silver perchlorate (AgClO₄). Combining SANS and SAXS, the structural changes in the w/o microemulsions before and after the formation of Ag NPs via photoreduction were quantitatively evaluated. From the SANS experiments performed using the contrast-variation method, the size of water cores containing Ag NPs and the thickness of the AOT shells were calculated using the core-shell hard-sphere model. The size of the Ag NPs and their aggregates was calculated via SAXS analysis based on the polydisperse sphere model with a Schulz-Zimm distribution. We found that aggregates of three or four primary Ag NPs are formed by, first, the aggregation of water droplets through the entanglement of the tails of the AOT shell, followed by the self-assembly of Ag NPs into their aggregates because of particle-particle attractive interactions.

Highly Heterogeneous Polarization and Solvation of Gold Nanoparticles in Aqueous Electrolytes

The performance of gold nanoparticles (NPs) in applications depends critically on the structure of the NP-solvent interface, at which the electrostatic surface polarization is one of the key characteristics that affects hydration, ionic adsorption, and electrochemical reactions. Here, we demonstrate significant effects of explicit metal polarizability on the solvation and electrostatic properties of bare gold NPs in aqueous electrolyte solutions of sodium salts of various anions (Cl^-, BF₄^-, PF₆^-, nitrophenolate, and 3- and 4-valent hexacyanoferrate), using classical molecular dynamics simulations with a polarizable core-shell model for the gold atoms. We find considerable spatial heterogeneity of the polarization and electrostatic potentials on the NP surface, mediated by a highly facet-dependent structuring of the interfacial water molecules. Moreover, ion-specific, facet-dependent ion adsorption leads to considerable alterations of the interfacial polarization. Compared to nonpolarizable NPs, surface polarization modifies water local dipole densities only slightly but has substantial effects on the electrostatic surface potentials and leads to significant lateral redistributions of ions on the NP surface. Besides, interfacial polarization effects cancel out in the far field for monovalent ions but not for polyvalent ions, as anticipated from continuum "image-charge" concepts. Far-field effective Debye-Hückel surface potentials change accordingly in a valence-specific fashion. Hence, the explicit charge response of metal NPs is crucial for the accurate description and interpretation of interfacial electrostatics (e.g., for charge transfer and interfacial polarization in catalysis and electrochemistry).

Photoluminescence of Fully Inorganic Colloidal Gold Nanocluster and Their Manipulation Using Surface Charge Effects

Fully inorganic, colloidal gold nanoclusters (NCs) constitute a new class of nanomaterials that are clearly distinguishable from their commonly studied metal-organic ligand-capped counterparts. As their synthesis by chemical methods is challenging, details about their optical properties remain widely unknown. In this work, laser fragmentation in liquids is performed to produce fully inorganic and size-controlled colloidal gold NCs with monomodal particle size distributions and an fcc-like structure. Results reveal that these NCs exhibit highly pronounced photoluminescence with quantum yields of 2%. The emission behavior of small (2-2.5 nm) and ultrasmall (<1 nm) NCs is significantly different and dominated by either core- or surface-based emission states. It is further verified that emission intensities are a function of the surface charge density, which is easily controllable by the pH of the surrounding medium. This experimentally observed correlation between surface charge and photoluminescence emission intensity is confirmed by density functional theoretical simulations, demonstrating that fully inorganic NCs provide an appropriate material to bridge the gap between experimental and computational studies of NCs. The presented study deepens the understanding of electronic structures in fully inorganic colloidal gold NCs and how to systematically tune their optical properties via surface charge density and particle size.

Design and perspective of amorphous metal nanoparticles from laser synthesis and processing

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts. Conventional synthesis strategies easily induce product contamination and/or size limitations, which largely narrow their applications. In recent years, laser ablation in liquid (LAL) and laser fragmentation in liquid (LFL) as "green" and scalable colloid synthesis methodologies have attracted extensive enthusiasm in the production of ultrapure crystalline NPs, while they also show promising potential for the production of A-NPs. Yet, the amorphization in such methods still lacks sufficient rules to follow regarding the formation mechanism and criteria. To that end, this article reviews amorphous metal oxide and carbide NPs from LAL and LFL in terms of NP types, liquid selection, target elements, laser parameters, and possible formation mechanism, all of which play a significant role in the competitive relationship between amorphization and crystallization. Furthermore, we provide the prospect of laser-generated metallic glass nanoparticles (MG-NPs) from MG targets. The current and potential applications of A-NPs are also discussed, categorized by the attractive application fields e.g. in catalysis and magnetism. The present work aims to give possible selection rules and perspective on the design of colloidal A-NPs as well as the synthesis criteria of MG-NPs from laser-based strategies.

Surface Chemistry of Gold Nanoparticles Produced by Laser Ablation in Pure and Saline Water

Pulsed laser ablation in liquid (PLAL) is a powerful method for producing nanoparticle colloids with a long-term stability despite the absence of stabilizing organic agents. The colloid stability involves different reactivities and chemical equilibria with complex ionic-specific effects at the nanoparticle/solvent interface which must be strongly influenced by their chemical composition. In this work, the surface composition of PLAL-produced gold nanoparticles in alkaline and saline (NaBr) water is investigated by X-ray photoelectron spectroscopy on free-flying nanoparticles, exempt from any substrate or radiation damage artifact. The Au 4f photoelectron spectra with a depth profiling investigation are used to evaluate the degree of nanoparticle surface oxidation. In alkaline water, the results preclude any surface oxidation contrary to the case of nanoparticles produced in NaBr solution. In addition, the analysis of Br 3d core-level photoelectron spectra agrees with a clear signature of Br on the nanoparticle surface, which is confirmed by a specific valence band feature. This experimental study is supported by DFT calculations, evaluating the energy balance of halide adsorption on different configurations of gold surfaces including oxidation or adsorbed salts.

Rational design of solid-acid catalysts for cellulose hydrolysis using colloidal theory

Solid-acid catalysts functionalized with catalytic groups have attracted intense interest for converting cellulose into soluble products. However, design of solid-7 acid catalysts has been guided by molecular level interactions and the actual mechanism of cellulose-solid-acid catalyst particles adsorption remains unknown. Here, colloidal stability theory, DLVO, is used to rationalize the design of solid acids for targeted cellulose adsorption. In nearly all cases, an energy barrier, arising from electrostatic repulsion and much larger than the energy associated with thermal fluctuations, prevents close contact between the solid acid and cellulose. Polymer-based solid-acid substrates such as polystyrene and Nafion are especially ineffective as their interaction with cellulose is dominated by the repulsive electrostatic force. Carbon and metal oxides have potential to be effective for cellulose-solid-acid interaction as their attractive van der Waals interaction can offset the repulsive electrostatic interaction. The effects of reactor temperature and shear force were evaluated, with the finding that reactor temperature can minimize the catalyst-cellulose interaction barrier, promoting coagulation, but that the shear force in a typical laboratory reactor cannot. We have evaluated strategies for enhancing cellulose-catalyst interaction and conclude that raising reaction temperature or synthesizing acid/base bifunctional catalysts can effectively diminish electrostatic repulsion and promote cellulose-catalyst coagulation. The analysis presented here establishes a rational method for designing solid acid catalysts for cellulose hydrolysis.

Ion-Specific Adsorption on Bare Gold (Au) Nanoparticles in Aqueous Solutions: Double-Layer Structure and Surface Potentials

We study the solvation and electrostatic properties of bare gold (Au) nanoparticles (NPs) of 1-2 nm in size in aqueous electrolyte solutions of sodium salts of various anions with large physicochemical diversity (Cl^-, BF₄^-, PF₆^-, Nip^- (nitrophenolate), 3- and 4-valent hexacyanoferrate (HCF)) using nonpolarizable, classical molecular dynamics computer simulations. We find a substantial facet selectivity in the adsorption structure and spatial distribution of the ions at the AuNPs: while sodium and some of the anions (e.g., Cl^-, HCF^3-) adsorb more at the "edgy" (100) and (110) facets of the NPs, where the water hydration structure is more disordered, other ions (e.g., BF₄^-, PF₆^-, Nip^-) prefer to adsorb strongly on the extended and rather flat (111) facets. In particular, Nip^-, which features an aromatic ring in its chemical structure, adsorbs strongly and perturbs the first water monolayer structure on the NP (111) facets substantially. Moreover, we calculate adsorptions, radially resolved electrostatic potentials as well as the far-field effective electrostatic surface charges and potentials by mapping the long-range decay of the calculated electrostatic potential distribution onto the standard Debye-Hückel form. We show how the extrapolation of these values to other ionic strengths can be performed by an analytical Adsorption-Grahame relation between the effective surface charge and potential. We find for all salts negative effective surface potentials in the range from -10 mV for NaCl down to about -80 mV for NaNip, consistent with typical experimental ranges for the zeta potential. We discuss how these values depend on the surface definition and compare them to the explicitly calculated electrostatic potentials near the NP surface, which are highly oscillatory in the ±0.5 V range.

Ion Specific Effects on the Stability of Halloysite Nanotube Colloids-Inorganic Salts versus Ionic Liquids

Charging and aggregation processes were studied in aqueous dispersions of halloysite nanotubes (HNTs) in the presence of monovalent inorganic electrolytes and ionic liquid (IL) constituents. The same type of co-ion (same sign of charge as HNT) was used in all systems, while the type of counterions (opposite sign of charge as HNT) was systematically varied. The affinity of the inorganic cations to the HNT surface influenced their destabilizing power leading to an increase in the critical coagulation concentration (CCC) of HNT dispersions in the Cs+ < K+ < Na+ order. This trend agrees with the classical Hofmeister series for negatively charged hydrophobic surfaces. For the IL cations, the CCCs increased in the order BMPY+ < BMPIP+ < BMPYR+ < BMIM+. An unexpectedly strong adsorption of BMPY+ cations on the HNT surface was observed giving rise to charge neutralization and reversal of the oppositely charged outer surface of HNT. The direct Hofmeister series was extended with these IL cations. The main aggregation mechanism was rationalized within the classical theory developed by Derjaguin, Landau, Verwey, and Overbeek, while ion specific effects resulted in remarkable variation in the CCC values. The results unambiguously proved that the hydration level of the surface and the counterions plays a crucial role in the formation of the ionic composition at the solid-liquid interface and consequently, in the colloidal stability of the HNT particles in both inorganic salt and IL solutions.

Effect of the Surface Chemical Composition and of Added Metal Cation Concentration on the Stability of Metal Nanoparticles Synthesized by Pulsed Laser Ablation in Water

Metal nanoparticles (NPs) made of gold, silver, and platinum have been synthesized by means of pulsed laser ablation in liquid aqueous solution. Independently from the metal nature, all NPs have an average diameter of 10 ± 5 nm. The ζ-potential values are: −62 ± 7 mV for gold, −44 ± 2 mV for silver and −58 ± 3 for platinum. XPS analysis demonstrates the absence of metal oxides in the case of gold and silver NPs. In the case of platinum NPs, 22% of the particle surface is ascribed to platinum oxidized species. This points to a marginal role of the metal oxides in building the negative charge that stabilizes these colloidal suspensions. The investigation of the colloidal stability of gold NPs in the presence of metal cations shows these NPs can be destabilized by trace amounts of selected metal ions. The case of Ag+ is paradigmatic since it is able to reduce the NP ζ-potential and to induce coagulation at concentrations as low as 3 μM, while in the case of K+ the critical coagulation concentration is around 8 mM. It is proposed that such a huge difference in destabilization power between monovalent cations can be accounted for by the difference in the reduction potential.

Specific Ion Effects on the Colloidal Stability of Layered Double Hydroxide Single-layer Nanosheets

The surface charge properties and aggregation behavior of positively charged Mg-Al-NO₃ layered double hydroxide (LDH) single-layer nanosheets dispersed in water were investigated in the presence of K⁺ salts with different mono-, di-, and trivalent anions, using electrophoresis and dynamic light scattering techniques. An increase in the salt concentration can significantly decrease the effective surface charge density (σ_eff) of LDHs, leading to the aggregation of nanosheets. The critical coagulation concentration (CCC) or ionic strength (CCIS) of salts for nanosheets significantly decreases with an increase in the valence of anions. Specific ion effects, with a partially reverse Hofmeister series, are observed. On the basis of the Stern model and the DLVO theory, the relationship of CCC with σ_eff and the ionic valences of salts (z_i) is theoretically analyzed, which can accurately describe the dependence of CCC on the σ_eff and z_i but cannot explain the origin of specific ion effects. To explore the origin of specific ion effects, a correlation between CCIS and the specific adsorption energy (E_sc) of anions within the Stern layer is developed. Especially, an empirical relationship of E_sc with the characteristic physical parameters of anions is proposed. Our model can accurately predict the CCISs of at least monovalent anions and divalent anions (CO₃^2- and SO₄^2-), demonstrating that the specific ion effects observed can be attributed to the differences in ionic size, polarizability, and hydration free energy (or the formation capacity of anion-cation pairs) of different anions. This work not only deepens the understanding of specific ion effects on the colloidal stability but also provides useful information for the potential applications of LDH single-layer nanosheets.

Manipulation of the Size and Phase Composition of Yttrium Iron Garnet Nanoparticles by Pulsed Laser Post-Processing in Liquid

Modification of the size and phase composition of magnetic oxide nanomaterials dispersed in liquids by laser synthesis and processing of colloids has high implications for applications in biomedicine, catalysis and for nanoparticle-polymer composites. Controlling these properties for ternary oxides, however, is challenging with typical additives like salts and ligands and can lead to unwanted byproducts and various phases. In our study, we demonstrate how additive-free pulsed laser post-processing (LPP) of colloidal yttrium iron oxide nanoparticles using high repetition rates and power at 355 nm laser wavelength can be used for phase transformation and phase purification of the garnet structure by variation of the laser fluence as well as the applied energy dose. Furthermore, LPP allows particle size modification between 5 nm (ps laser) and 20 nm (ns laser) and significant increase of the monodispersity. Resulting colloidal nanoparticles are investigated regarding their size, structure and temperature-dependent magnetic properties.

Effective size separation of laser-generated, surfactant-free nanoparticles by continuous centrifugation

High-power, nanosecond, pulsed-laser ablation in liquids enables the continuous synthesis of highly pure colloidal nanoparticles (NPs) at an application-relevant scale. The gained mass-weighted particle size distribution is however often reported to be broad, requiring post treatment like centrifugation to remove undesired particle size fractions. To date, available centrifugation techniques are generally discontinuous, limiting the throughput and hindering economic upscaling. Hence, throughout this paper, a scalable, continuously operating centrifugation of laser-generated platinum NPs in a tubular bowl centrifuge is reported for the first time. To that end, using a 121 W ns-laser, the continuous production of a colloidal suspension of NPs, yet with broad particle size distribution has been employed, yielding productivities of 1-2 g h^-1 for gold, silver, and platinum. The power-specific productivities (Au: 18 mg h^-1 W^-1, Pt: 13 mg h^-1 W^-1, Ag: 8 mg h^-1 W^-1, Ni: 6 mg h^-1 W^-1) are far higher than reported before. Subsequent downstream integration of a continuously operating tubular bowl centrifuge was successfully achieved for Pt NPs allowing the removal of undesired particle size with high throughput. By means of a systematic study of relevant centrifugation parameters involved, effective size optimization and respective size sharpness parameters for a maximum Pt NP diameter of 10 nm are reported. The results of the experimental centrifugation of laser-generated Pt NPs were in excellent agreement with the theoretically calculated cut-off diameter. After centrifugation with optimized parameters (residence time of 5 min; g-force of 38,454 g), the polydispersity indices of the Pt NPs size distributions were reduced by a factor of six, and high monodispersity was observed.

Promoting the Electrocatalytic Performance of Noble Metal Aerogels by Ligand-Directed Modulation

Noble metal aerogels (NMAs) are an emerging class of porous materials. Embracing nano-sized highly-active noble metals and porous structures, they display unprecedented performance in diverse electrocatalytic processes. However, various impurities, particularly organic ligands, are often involved in the synthesis and remain in the corresponding products, hindering the investigation of the intrinsic electrocatalytic properties of NMAs. Here, starting from laser-generated inorganic-salt-stabilized metal nanoparticles, various impurity-free NMAs (Au, Pd, and Au-Pd aerogels) were fabricated. In this light, we demonstrate not only the intrinsic electrocatalytic properties of NMAs, but also the prominent roles played by ligands in tuning electrocatalysis through modulating the electron density of catalysts. These findings may offer a new dimension to engineer and optimize the electrocatalytic performance for various NMAs and beyond.

Interactions of sub-five-nanometer diameter colloidal palladium nanoparticles in solution investigated via liquid cell transmission electron microscopy

Inter-particle interactions play important roles in controlling the structures, dispersion state and chemo-physical properties of colloidal nanoparticles (NPs) in liquid media. In this work, we prepared palladium (Pd) NPs with an average diameter of ∼4.6 nm in situ inside the liquid cell, and investigated their coupled diffusion and aggregation behaviors through liquid cell transmission electron microscopy (LCTEM). Via analyzing the interaction energies and forces, we derived the effective working range for repulsive double layer interaction experimentally, a value larger than two times the Debye length, suggesting a different interaction behavior of sub-5 nm NPs from that of colloidal NPs in larger sizes. Our results provide insights for the interactions between colloidal ultrafine nanoparticles in solution and will also shed light on the precisely controlled assembly of colloidal nanocrystals for practical applications.

In this paper, sub-5 nm diameter palladium nanoparticles were prepared in situ inside the liquid cell, and the interactions between them were investigated via liquid cell transmission electron microscopy.

Assessing the Surface Oxidation State of Free-Standing Gold Nanoparticles Produced by Laser Ablation

The surface chemistry of gold nanoparticles produced by the pulsed laser ablation in liquids method is investigated by X-ray photoelectron spectroscopy (XPS). The presence of surface oxide expected on these systems is investigated using synchrotron radiation in conditions close to their original state in solvent but free from substrate or solvent effects which could affect the interpretation of spectroscopic observations. For that purpose we performed the experiment on a controlled free-standing nanoparticle beam produced by combination of an atomizer and an aerodynamic lens system. These results are compared with those obtained by the standard situation of deposited nanoparticles on silicon substrate. An accurate analysis based on Bayesian statistics concludes that the existence of oxide in the free-standing conditions cannot be solely confirmed by the recorded core-level 4f spectra. If present, our data indicate an upper limit of 2.15 ± 0.68% of oxide. However, a higher credence to the hypothesis of its existence is brought by the structureless valence profile of the free-standing beam. Moreover, the cross-comparison with the deposited nanoparticles case clearly evidences an important misleading substrate effect. Experiment with free-standing nanoparticles is then demonstrated to be the right way to further investigate oxidation states on Au nanoparticles.

The Hofmeister series: Specific ion effects in aqueous polymer solutions

Specific ion effects in aqueous polymer solutions have been under active investigation over the past few decades. The current state-of-the-art research is primarily focused on the understanding of the mechanisms through which ions interact with macromolecules and affect their solution stability. Hence, we herein first present the current opinion on the sources of ion-specific effects and review the relevant studies. This includes a summary of the molecular mechanisms through which ions can interact with polymers, quantification of the affinity of ions for the polymer surface, a thermodynamic description of the effects of salts on polymer stability, as well as a discussion on the different forces that contribute to ion-polymer interplay. Finally, we also highlight future research issues that call for further scrutiny. These include fundamental questions on the mechanisms of ion-specific effects and their correlation with polymer properties as well as a discussion on the specific ion effects in more complex systems such as mixed electrolyte solutions.

Synergism between Specific Halide Anions and pH Effects during Nanosecond Laser Fragmentation of Ligand-Free Gold Nanoparticles

Gold nanoclusters (AuNCs) with diameters smaller than 3 nm are an emerging field of research because they possess interesting optical properties, such as photoluminescence. However, to date, it is still difficult to distinguish whether these properties originate from the cores of the nanoparticles or from the adsorbates on their surfaces. Hence, there is a high demand for ligand-free, ultra-small particles because they make it possible to study ligand and core effects separately. Pulsed laser fragmentation in liquids (LFL) is a convenient route for the synthesis of ligand-free AuNCs. The influence of physical parameters, such as melting and evaporation, on the LFL process is well understood both theoretically and experimentally. However, the impact of the chemical composition of the medium during LFL, which critically affects the particle formation process, has been less well examined. Therefore, in this work, we elucidate the extent to which the ionic strength, the pH value, and the nature of the halide anion that is present, that is, F^-, Cl^-, Br^-, or I^-, influence the particle size distribution of the LFL product and the mean yield of small particles (<3 nm) of the product. We showed that the yield of small particles can be enhanced by the synergism between pH and specific ion effects, which probably is attributable to the adsorption of specific anions. In addition, our findings indicated that anion-based stabilization depends critically on the type of anion. A direct Hofmeister effect was observed for anions in the neutral pH regime, whereas an indirect Hofmeister series was reported in alkaline solution, which probably was due to the more hydrophilic surfaces of the AuNCs that were formed.

Influence of the Counterion Nature on the Stability Sequence of Hydrophobic Latex Particles

The aggregation kinetics of negatively charged polystyrene latex particles in the presence of monovalent electrolytes have been investigated. The inferred coagulation critical concentrations were compared to establish the stability sequence. With the same representative co-ions, this sequence is reversed when using kosmotrope sodium and chaotrope potassium cations. The results have been ascribed to a variable competition of the co-ions toward the hydrophobic surface depending on the lyotropic nature of the associated counterion. They provide new insights into the implication of ionic specificity in the stability behavior of aqueous dispersions of charged colloids.

Time and Mechanism of Nanoparticle Functionalization by Macromolecular Ligands during Pulsed Laser Ablation in Liquids

Laser ablation of gold in liquids with nanosecond laser pulses in aqueous solutions of inorganic electrolytes and macromolecular ligands for gold nanoparticle size quenching is probed inside the laser-induced cavitation bubble by in situ X-ray multicontrast imaging with a Hartmann mask (XHI). It is found that (i) the in situ size quenching power of sodium chloride (NaCl) in comparison to the ablation in pure water can be observed by the scattering contrast from XHI already inside the cavitation bubble, while (ii) for polyvinylpyrrolidone (PVP) as a macromolecular model ligand an in situ size quenching cannot be observed. Complementary ex situ characterization confirms the overall size quenching ability of both additive types NaCl and PVP. The macromolecular ligand as well as its monomer N-vinylpyrrolidone (NVP) are mainly effective for growth quenching of larger nanoparticles on later time scales, leading to the conclusion of an alternative interaction mechanism with ablated nanoparticles compared to the electrolyte NaCl, probably outside of the cavitation bubble, in the surrounding liquid phase. While monomer and polymer have similar effects on the particle properties, with the polymer being slightly more efficient, only the polymer is effective against hydrodynamic aggregation.

An evaluation of monovalent, divalent, and trivalent cations as aggregating agents for surface enhanced Raman spectroscopy (SERS) analysis of synthetic cannabinoids

Monovalent, divalent and trivalent chloride, sulfate and nitrate salts were examined to determine the critical coagulation concentration (CCC) for each salt and its corresponding effect on detection limits for SERS analysis of synthetic cannabinoids.

Determining the role of redox-active materials during laser-induced water decomposition

The decomposition of water and the formation of molecular hydrogen, oxygen, and hydrogen peroxide during laser ablation of redox-active materials is systematically studied and related to the ablation rate and oxidation degree of the nanoparticles.

Ionic structure around polarizable metal nanoparticles in aqueous electrolytes

Metal nanoparticles are receiving increased scientific attention owing to their unique physical and chemical properties that make them suitable for a wide range of applications in diverse fields, such as electrochemistry, biochemistry, and nanomedicine. Their high metallic polarizability is a crucial determinant that defines their electrostatic character in various electrolyte solutions. Here, we introduce a continuum-based model of a metal nanoparticle with explicit polarizability in the presence of different kinds of electrolytes. We employ several, variously sophisticated, theoretical approaches, corroborated by Monte Carlo simulations in order to elucidate the basic electrostatics principles of the model. We investigate how different kinds of asymmetries between the ions result in non-trivial phenomena, such as charge separation and a build-up of a so-called zero surface-charge double layer.

Ion specific effects on the immobilisation of charged gold nanoparticles on metal surfaces

Since the pioneering work of F. Hofmeister, Arch. Exp. Pathol. Pharmakol., 1888, 24, 247, ion specific effects have been steadily reported in the context of colloidal or protein stabilisation in electrolyte solutions. Although the observed effects are omnipresent in chemistry and biology, their origin is still under ferocious discussion. Here, we report on ion specific effects affecting the self-assembly of amine and carboxylic acid functionalised gold nanoparticles on metal surfaces as well as in electrolyte solution as a function of the monovalent cations Li+, Na+, K+ and Cs+. Mercaptooctanoic acid and 1,8-amine-octanethiol functionalised gold nanoparticles were adsorbed on structured AuPd/Pt substrates under addition of the respective chloride salts. Furthermore, the influence of the same salts on the salt induced aggregation of these AuNP was investigated. Our results demonstrate that the assembly processes on the metal surface as well as in electrolyte solution are influenced by the addition of different cations. We attribute the observed effects to ion pairing of the functional end groups with the added cations. With these findings we introduce a new parameter to control the self-assembly of 2D AuNP arrays on solid supports or of 3D AuNP networks in solution, which could be of relevance for the fabrication of new tailor-made functional materials or for biomedical applications.

Robust colorimetric detection based on the anti-aggregation of gold nanoparticles for bromide in rice samples

Inorganic bromide (Br⁻) is an important contaminant ion as it can originate from the overuse of illegal methyl bromide as a fumigant in stored rice samples. Herein, we developed a simple and highly sensitive colorimetric sensor for bromide ion detection in rice samples. The sensor is based on the anti-aggregation of gold nanoparticles (AuNPs) by Br⁻ in the presence of Cr³⁺, which made the method more selective than other typical aggregations of nanoparticles. The AuNPs underwent an aggregation process as a result of the coordination of Cr³⁺ and the carboxylate group of a citrate ion stabilized the AuNPs, resulting in a red-to-blue color change. When Br⁻ was pre-mixed with the AuNPs and Cr³⁺ was added, the solution color changed from blue to red with an increase in the Br⁻ concentration. The anti-aggregation process can be detected with the naked eye and monitored using UV-vis spectrophotometry. The linear calibration curve ranged between 0.31 and 3.75 μM Br⁻ with a low LOD and LOQ of 0.04 and 0.13 μM. The recovery was excellent, ranging from 79.9–92.2% with an RSD of less than 4.0%. The good inter-day and intra-day precisions were 2.9–6.4% and 3.1–7.1%, respectively. The developed sensor has proved to provide a robust method for Br⁻ detection in rice samples.

In this work, we developed a AuNP colorimetric sensor for the facile, sensitive and selective detection of bromide ions in rice samples.

Palladium-mediated radical homocoupling reactions: a surface catalytic insight

In this work, we report a palladium nanoparticle-promoted reductive homocoupling of haloarenes, exhibiting a broad functional group tolerance. A mechanistic study was carried out, suggesting single-electron transfer processes on the metal surface.