Gold nanorod linking to control plasmonic properties in solution and polymer nanocomposites

Nanoparticle Size Influences the Self-Assembly of Gold Nanorods Using Flexible Streptavidin-Biotin Linkages

The self-assembly of colloidal nanocrystals remains of robust interest due to its potential in creating hierarchical nanomaterials that have advanced function. For gold nanocrystals, junctions between nanoparticles yield large enhancements in local electric fields under resonant illumination, which is suitable for surface-enhanced spectroscopies for molecular sensors. Gold nanorods can provide such plasmonic fields at near-infrared wavelengths of light for longitudinal excitation. Through the use of careful concentration and stoichiometric control, a method is reported herein for selective biotinylation of the ends of gold nanorods for simple, consistent, and high-yielding self-assembly upon addition of the biotin-binding protein streptavidin. This method was applied to four different sized nanorods of similar aspect ratio and analyzed through UV-vis spectroscopy for qualitative confirmation of self-assembly and transmission electron microscopy to determine the degree of self-assembly in end-linked nanorods. The yield of end-linked assemblies approaches 90% for the largest nanorods and approaches 0% for the smallest nanorods. The number of nanorods linked in one chain also increases with an increased nanoparticle size. The results support the notion that the lower ligand density at the ends of the larger nanorods yields preferential substitution reactions at those ends and hence preferential end-to-end assembly, while the smallest nanorods have a relatively uniform ligand density across their surfaces, leading to spatially random substitution reactions.

In situ reversible tuning of chemical interface damping in mesoporous silica-coated gold nanorods via direct adsorption and removal of thiol

Chemical interface damping (CID) is a recently proposed plasmon decay channel in gold nanoparticles. However, thus far, a very limited number of studies have focused on controlling CID in single gold nanoparticles. Herein, we describe a new simple method for reversible tuning of CID in single gold nanorods coated with a mesoporous silica shell (AuNRs@mSiO2). We used 1-alkanethiols with two different carbon chain lengths (1-butanethiol and 1-decanethiol) as adsorbates to induce CID. In addition, NaBH4 solution was used to remove the attached thiol from the AuNR surface. We confirmed the adsorption and removal of 1-alkanethiols on single AuNRs@mSiO2 and the corresponding changes in localized surface plasmon resonance (LSPR) peak wavelengths and linewidths. Furthermore, we investigated the effect of immersion time in NaBH4 solution on thiol removal from AuNRs@mSiO2. Therefore, the LSPR properties and CID can be controlled, thereby paving the way for in situ reversible tuning of CID by repeated adsorption and desorption of thiol molecules on single AuNRs@mSiO2.

Effects of Amine Linkers with Different Carbon Chain Lengths at Guanine-Rich Polynucleotides on Chemical Interface Damping in Single Gold Nanorods

DNA-functionalized gold nanoparticles (AuNPs) are used for various bioapplications, such as biosensor development and drug delivery. Nevertheless, no study has reported the effect of polynucleotide chains on chemical interface damping (CID), the most recently proposed plasmon damping pathway in single AuNPs. In this study, we conducted total internal reflection scattering measurements of gold nanorods (AuNRs) to reveal the CID effect induced by amine (NH₂)-linked polynucleotides (or DNA) with guanine-rich sequences through the interaction between nitrogen and Au surfaces. Additionally, we elucidated the effect of a linear hydrocarbon chain length between NH₂ and DNA (NH₂-C_n-DNA, n = 6, 12, 18, 24) on spectral changes in single AuNRs. The localized surface plasmon resonance (LSPR) linewidth increased with an increasing number of linear carbon, from 6 to 24, due to the increase in van der Waals forces. Second, the effect of the direction (5' or 3' ends) of DNA attachment to the AuNR surfaces on LSPR spectral changes was investigated, and there was no significant difference in LSPR wavelength and full linewidth at half-maximum shifts caused by the DNA attachment directions (5' or 3' ends). Third, guanine-rich DNA can fold into four-stranded secondary structures called G-quadruplexes (GQs). We demonstrated the effect of linear carbon chain length, between NH₂ and GQs, on CID in single AuNRs. Lastly, a label-free detection of DNA hybridization events on single AuNRs was demonstrated for sensing applications. Thus, we provide an insight into the effect of amine-functionalized guanine-rich DNA with different carbon chains on LSPR spectral changes, including CID in single AuNRs.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

In situ reversible tuning of chemical interface damping in single gold nanorod-based recyclable platforms through manipulation of supramolecular host-guest interactions

Recently, chemical interface damping (CID) has been proposed as a new plasmon damping pathway based on interfacial hot-electron transfer from metal to adsorbate molecules. It has been considered essential, owing to its potential implications in efficient photochemical processes and sensing experiments. However, thus far, studies focusing on controlling CID in single gold nanoparticles have been very limited, and in situ reversible tuning has remained a considerable challenge. In these scanning electron microscopy-correlated dark-field spectroscopic measurements and density functional theory calculations, cucurbit[7]uril (CB[7])-based host–guest supramolecular interactions were employed to examine and control the CID process using monoamine-functionalized CB[7] (CB[7]-NH₂) attached to single gold nanorods (AuNRs). In situ tuning of CID through the CB[7]–oxaliplatin complexation, which can result in the variation of the chemical nature and electronic properties of adsorbates, was presented. In addition, in situ tuning of CID was demonstrated through the competitive release of the oxaliplatin guest from the oxaliplatin@CB[7] complex, which was then replaced by a competitor guest of spermine in sufficient amounts. Furthermore, nuclear magnetic resonance experiments confirmed that the release of the guest is the consequence of adding salt (NaCl). Thus, in situ reversible tuning of CID in single AuNRs was achieved through successive steps of encapsulation and release of the guest on the same AuNR in a flow cell. Finally, single CB[7]-NH₂@AuNRs were presented as a recyclable platform for CID investigations after the complete release of guest molecules from their host–guest inclusion complexes. Therefore, this study has paved a new route to achieve in situ reversible tuning of CID in the same AuNR and to investigate the CID process using CB-based host–guest chemistry with various guest molecules in single AuNRs for efficient hot-electron photochemistry and biosensing applications.

This study has paved a new route to achieve in situ reversible tuning of chemical interface damping (CID) in the same gold nanorod (AuNR) and to investigate the CID process using cucurbituril (CB)-based host–guest chemistry with various guest molecules in single AuNRs.

Dynamic Interfacial Trapping of Janus Nanorod Aggregates

Taking advantage of both shape and chemical anisotropy on the same nanoparticle offers rich self-assembly possibilities for nanotechnology. Through dissipative particle dynamics calculations, in the present work, the directed assembly of Janus nanorod aggregates and their capability to assemble into metastable novel structures at an interfacial level have been assessed. Symmetric Janus rods become kinetically trapped and exhibit either parallel or antiparallel alignment with respect to their long axis (different compositions). This depends on several factors that have been mapped herein and that can be precisely tuned: Flory-Huggins interaction parameter χ between polymer phases; concentration; shear rate; and even aggregate shape. Ultimately, two different aggregate structures result from rod tumbling that are not observed under quiescent conditions: monolayer-like aggregates exhibiting trapped rods with antiparallel configuration; and stacked nanorod arrays similar to superlattice sheets. These different structures can be controlled by the likelihood with which tumbling Janus rods encounter other aggregate portions showing parallel alignment. Hence, the present study offers fundamental insight into relevant parameters that govern the directed assembly of Janus nanoparticles at an interfacial level. Novel applications may potentially derive from the resulting aggregate structures, such as peculiar displays and sensors.

Enhancement of Nonlinear Optical Scattering by Gold Nanoparticles through Aggregation-Induced Plasmon Coupling in the Near-Infrared

Gold nanoparticles (AuNPs) are regarded as promising building blocks in functional nanomaterials for sensing, drug delivery and catalysis. One remarkable property of these particles is the localized surface plasmon resonance (LSPR), which gives rise to augmented optical properties through local field enhancement. LSPR also influences the nonlinear optical properties of metal NPs (MNPs) making them potentially interesting candidates for fast, high resolution nonlinear optical imaging. In this work we characterize and discuss the wavelength dependence of the hyper-Rayleigh scattering (HRS) behavior of spherical gold nanoparticles (GNP) and gold nanorods (GNR) in solution, from 850 nm up to 1300 nm, covering the near-infrared (NIR) window relevant for deep tissue imaging. The high-resolution spectral data allows discriminating between HRS and two photon photoluminescence contributions. Upon particle aggregation, we measured very large enhancements (ca. 10⁴ ) of the HRS intensity in the NIR, which is explained by considering aggregation-induced plasmon coupling effects and local field enhancement. These results indicate that purposely designed coupled nanostructures could prove advantageous for nonlinear optical imaging and biosensing applications.

Spectral-Selective Plasmonic Polymer Nanocomposites Across the Visible and Near-Infrared

State-of-the-art commercial light-reflecting glass is coated with a metalized film to decrease the transmittance of electromagnetic waves. In addition to the cost of the metalized film, one major limitation of such light-reflecting glass is the lack of spectral selectivity over the entire visible and near-infrared (NIR) spectrum. To address this challenge, we herein effectively harness the transmittance, reflectance, and filtration of any wavelength across the visible and NIR, by judiciously controlling the planar orientation of two-dimensional plasmonic silver nanoplates (AgNPs) in polymer nanocomposites. In contrast to conventional bulk polymer nanocomposites where plasmonic nanoparticles are randomly mixed within a polymer matrix, our thin-film polymer nanocomposites comprise a single layer, or any desired number of multiple layers, of planarly oriented AgNPs separated by tunable spacings. This design employs a minimal amount of metal and yet efficiently manages light across the visible and NIR. The thin-film plasmonic polymer nanocomposites are expected to have a significant impact on spectral-selective light modulation, sensing, optics, optoelectronics, and photonics.

Tuning Chemical Interface Damping: Interfacial Electronic Effects of Adsorbate Molecules and Sharp Tips of Single Gold Bipyramids

The optimization of the localized surface plasmon resonance (LSPR)-decaying channels of hot-electrons is essential for efficient optical and photochemical processes. Understanding and having the ability to control chemical interface damping (CID) channel contributions will bring about new possibilities for tuning the efficiency of plasmonic hot-electron energy transfer in artificial devices. In this scanning electron microscopy-correlated dark-field scattering study, the CID was controlled by focusing on the electronic nature of disubstituted benzene rings acting as adsorbates, as well as the effects of sharp tips on gold bipyramids (AuBPs) with similar aspect ratios to those of gold nanorods. The results showed that the sharp tips on single AuBPs, as well as the electronic effects of the adsorbate molecules, increase the interfacial contact between the nanoparticles and adsorbate molecules. Electron withdrawing groups (EWGs) on the adsorbates induce larger homogeneous LSPR line widths compared to those of electron donating groups (EDGs). Depending on the location (ortho, meta, and para) of the EDG, the effect of benzene rings with an EDG, which was considered to be induced by sulfur atoms bound to the nanoparticle surface, is weakened by the back transfer of electrons facilitated by the difference in the availability of the electrons of the EDG. Therefore, this study reports that the CID in the LSPR total decay channels can be tuned by controlling the electron withdrawing and electron donating features of adsorbate molecules with the surface topology of metal.

Alignment of Nanoplates in Lamellar Diblock Copolymer Domains and the Effect of Particle Volume Fraction on Phase Behavior

Polymer nanocomposites (PNCs) that employ diblock copolymers (BCPs) to organize and align anisotropic nanoparticles (NPs) have the potential to facilitate self-assembling hierarchical structures. However, limited studies have been completed to understand the parameters that guide the assembly of nonspherical NPs in BCPs. In this work, we establish a well-defined nanoplate system to investigate the alignment of two-dimensional materials in a lamellar-forming poly(styrene-b-methyl methacrylate) (PS-b-PMMA) BCP with domains oriented parallel to the substrate. Monodisperse gadolinium trifluoride rhombic nanoplates doped with ytterbium and erbium [GdF₃:Yb/Er (20/2 mol %)] are synthesized and grafted with phosphoric acid functionalized polyethylene glycol (PEG-PO₃H₂). Designed with chemical specificity to one block, the nanoplates align in the PMMA domain at low volume fractions (ϕ = 0.0083 and ϕ = 0.017). At these low NP loadings, the BCP lamellae are ordered and induce preferential alignment of the GdF₃:Yb/Er nanoplates. However, at high volume fractions (ϕ = 0.050 and ϕ = 0.064), the BCP lamellae are disordered with isotropically dispersed nanoplates. The transition from an ordered BCP system with aligned nanoplates to a disordered BCP with unaligned nanoplates coincides with the calculated overlap volume fraction, ϕ* = 0.051, where the pervaded space of the NPs begins to overlap. Two phenomena are observed in the results: the effect of lamellar formation on nanoplate orientation and the overall phase behavior of the PNCs. The presented research not only expands our knowledge of PNC phase behavior but also introduces a framework to further study the parameters that affect nanoplate alignment in BCP nanocomposites. Our ability to control anisotropic NP orientation in PNCs through self-assembling techniques lends itself to creating multifunctional materials with unique properties for various applications such as photovoltaic cells and barrier coatings.

Self-Assembly of Block Copolymer Chains To Promote the Dispersion of Nanoparticles in Polymer Nanocomposites

In this paper we adopt molecular dynamics simulations to study the amphiphilic AB block copolymer (BCP) mediated nanoparticle (NP) dispersion in polymer nanocomposites (PNCs), with the A-block being compatible with the NPs and the B-block being miscible with the polymer matrix. The effects of the number and components of BCP, as well as the interaction strength between A-block and NPs on the spatial organization of NPs, are explored. We find that the increase of the fraction of the A-block brings different dispersion effect to NPs than that of B-block. We also find that the best dispersion state of the NPs occurs in the case of a moderate interaction strength between the A-block and the NPs. Meanwhile, the stress-strain behavior is probed. Our simulation results verify that adopting BCP is an effective way to adjust the dispersion of NPs in the polymer matrix, further to manipulate the mechanical properties.

Nanoscale steady-state temperature gradients within polymer nanocomposites undergoing continuous-wave photothermal heating from gold nanorods

Anisotropically-shaped metal nanoparticles act as nanoscale heaters via excitation of a localized surface plasmon resonance, utilizing a photothermal effect which converts the optical energy into local heat. Steady-state temperatures within a polymer matrix embedded with gold nanorods undergoing photothermal heating using continuous-wave excitation are measured in the immediate spatial vicinity of the nanoparticle (referred to as the local temperature) from observing the rate of physical rotation of the asymmetric nanoparticles within the locally created polymer melt. Average temperatures across the entire (mostly solid) sample (referred to as the global temperature) are simultaneously observed using a fluorescence method from randomly dispersed molecular emitters. Comparing these two independent measurements in films having varying concentrations of nanorods reveals the interplay between the local and global temperatures, clearly demonstrating the capability of these material samples to sustain large steady-state spatial temperature gradients when experiencing continuous-wave excitation photothermal heating. These results are discussed quantitatively. Illustrative imaging studies of nanofibers under photothermal heating also support the presence of a large temperature gradient. Photothermal heating in this manner has potential utility in creating unique thermal processing conditions for outcomes such as driving chemical reactions, inducing crystallinity changes, or enhancing degradation processes in a manner unachievable by conventional heating methods.

Rapid Large-Scale Assembly and Pattern Transfer of One-Dimensional Gold Nanorod Superstructures

The utility of gold nanorods for plasmonic applications largely depends on the relative orientation and proximity of the nanorods. Though side-by-side or chainlike nanorod morphologies have been previously demonstrated, a simple reliable method to obtain high-yield oriented gold nanorod assemblies remains a significant challenge. We present a facile, scalable approach which exploits meniscus drag, evaporative self-assembly, and van der Waals interactions to precisely position and orient gold nanorods over macroscopic areas of 1D nanostructured substrates. By adjusting the ratio of the nanorod diameter to the width of the nanochannels, we demonstrate the formation of two highly desired translationally ordered nanorod patterns. We further demonstrate a method to transfer the aligned nanorods into a polymer matrix which exhibits anisotropic optical properties, allowing for rapid fabrication and deployment of flexible optical and electronic materials in future nanoscale devices.

Out-of-plane orientation alignment and reorientation dynamics of gold nanorods in polymer nanocomposite films

In this work, we develop a novel, in situ characterization method to measure the orientation order parameter and investigate the reorientation and reshaping dynamics of polymer grafted gold nanorods (AuNRs) in polymer nanocomposite (PNC) thin films. The long aspect-ratio of AuNRs results in two well-defined plasmon resonance modes, allowing the optical properties of the PNC to be tuned over a wide spectral range. The alignment of the AuNRs in a particular direction can also be used to further tune these optical properties. We utilize variable angle spectroscopic ellipsometry as a unique technique to measure the optical properties of PNC films containing AuNRs at various angles of incidence, and use effective index of refraction analysis of the PNC to relate the birefringence in the film due to changes of the plasmon coupling to the orientation order parameter of AuNRs. Polymer thin films (ca. 70 nm) of either polystyrene (PS) or poly(methyl methacrylate) (PMMA) containing PS grafted AuNRs are probed with ellipsometry, and the resulting extinction coefficient spectra compare favorably with more traditional analytical techniques, electron microscopy (EM) and optical absorbance (vis-NIR) spectroscopy. Furthermore, variable angle spectroscopic ellipsometry measures optical birefringence, which allows us to determine the in- and out-of plane order of the AuNRs, a property that is not easily accessible using other measurement techniques. Additionally, this technique is applied in situ to demonstrate that AuNRs undergo a rapid (ca. 1-5 hours) reorientation before undergoing a slower (ca. 24 hours) rod to sphere shape transition. The reorientation behavior is different depending on the polymer matrix used. In the athermal case (i.e. PS matrix), the AuNRs reorient isotropically, while in PMMA the AuNRs do not become isotropic, which we hypothesize is due to PMMA preferentially wetting the silica substrate, leaving less vertical space for the AuNRs to reorient.

Synthesis of Gold Nanoparticles with Buffer-Dependent Variations of Size and Morphology in Biological Buffers

The demand for biologically compatible and stable noble metal nanoparticles (NPs) has increased in recent years due to their inert nature and unique optical properties. In this article, we present 11 different synthetic methods for obtaining gold nanoparticles (Au NPs) through the use of common biological buffers. The results demonstrate that the sizes, shapes, and monodispersity of the NPs could be varied depending on the type of buffer used, as these buffers acted as both a reducing agent and a stabilizer in each synthesis. Theoretical simulations and electrochemical experiments were performed to understand the buffer-dependent variations of size and morphology exhibited by these Au NPs, which revealed that surface interactions and the electrostatic energy on the (111) surface of Au were the determining factors. The long-term stability of the synthesized NPs in buffer solution was also investigated. Most NPs synthesized using buffers showed a uniquely wide range of pH stability and excellent cell viability without the need for further modifications.

Fine Golden Rings: Tunable Surface Plasmon Resonance from Assembled Nanorods in Topological Defects of Liquid Crystals

Unprecedented, reversible, and dynamic control over an assembly of gold nanorods dispersed in liquid crystals (LC) is demonstrated. The LC director field is dynamically tuned at the nanoscale using microscale ring confinement through the interplay of elastic energy at different temperatures, thus fine-tuning its core replacement energy to reversibly sequester nanoscale inclusions at the microscale. This leads to shifts of 100 nm or more in the surface plasmon resonance peak, an order of magnitude greater than any previous work with AuNR composites.

Dispersion of PMMA-grafted, mesoscopic iron-oxide rods in polymer films

This study investigates the parameters that affect the dispersion of polymer grafted mesoscopic iron-oxide rods (FeMRs) in polymer matrices. FeMRs (212 nm long by 36 nm in diameter) are grafted with poly(methyl methacrylate) (PMMA) at three different brush molecular weights: 3.7 kg mol(-1), 32 kg mol(-1), and 160 kg mol(-1). Each FeMR sample was cast in a polymer thin film consisting of either PMMA or poly(ethylene oxide) (PEO) each at a molecular weight much higher or much lower than the brush molecular weight. We find that the FeMRs with 160 kg mol(-1) brush disperse in all matrices while the FeMRs with 32 kg mol(-1) and 3.7 kg mol(-1) brushes aggregate in all matrices. We perform simple free energy calculations, taking into account steric repulsion from the brush and van der Waals attraction between FeMRs. We find that there is a barrier for aggregation for the FeMRs with the largest brush, while there is no barrier for the other FeMRs. Therefore, for these mesoscopic particles, the brush size is the main factor that determines the dispersion state of FeMRs in polymer matrices with athermal or weakly attractive brush-matrix interactions. These studies provide new insight into the mechanisms that affect dispersion in polymer matrices of mesoscopic particles and therefore guide the design of composite films with well-dispersed mesoscopic particles.

Translational and rotational diffusion of a single nanorod in unentangled polymer melts

Polymer nanocomposites have been an issue of both academic and industrial interest due to promising electrical, mechanical, optical, and magnetic properties. The dynamics of nanoparticles in polymer nanocomposites is a key to understanding those properties of polymer nanocomposites and is important for applications such as self-healing nanocomposites. In this article we investigate the translational and the rotational dynamics of a single nanorod in unentangled polymer melts by employing extensive molecular dynamics simulations. A nanorod and polymers are modeled as semiflexible tangent chains of spherical beads. The stiffness of a nanorod is tuned by changing the bending potential between chemical bonds. When polymers are sufficiently long and the nanorod is stiff, the nanorod translates in an anisotropic fashion along the nanorod axis within time scales of translational relaxation times even in unentangled polymer melts. The rotational diffusion is suppressed more significantly than the translational diffusion as the polymer chain length is increased, thus the translational and rotational diffusion of the nanorod are decoupled. We also estimate the winding numbers of polymers, i.e., how many times a polymer winds the nanorod. The winding number increases with longer polymers but is relatively insensitive to the nanorod stiffness.

Polymer-mediated nanorod self-assembly predicted by dissipative particle dynamics simulations

Self-assembly of nanoparticles in polymer matrices is an interesting and growing subject in the field of nanoscience and technology. We report herein on modelling studies of the self-assembly and phase behavior of nanorods in a homopolymer matrix, with the specific goal of evaluating the role of deterministic entropic and enthalpic factors that control the aggregation/dispersion in such systems. Grafting polymer brushes from the nanorods is one approach to control/impact their self-assembly capabilities within a polymer matrix. From an energetic point of view, miscible interactions between the brush and the matrix are required for achieving a better dispersibility; however, grafting density and brush length are the two important parameters in dictating the morphology. Unlike in previous computational studies, the present Dissipative Particle Dynamics (DPD) simulation framework is able to both predict dispersion or aggregation of nanorods and determine the self-assembled structure, allowing for the determination of a phase diagram, which takes all of these factors into account. Three types of morphologies are predicted: dispersion, aggregation and partial aggregation. Moreover, favorable enthalpic interactions between the brush and the matrix are found to be essential for expanding the window for achieving a well-dispersed morphology. A three-dimensional phase diagram is mapped on which all the afore-mentioned parameters are taken into account. Additionally, in the case of immiscibility between brushes and the matrix, simulations predict the formation of some new and tunable structures.

Recent advances in nanoparticle based aptasensors for food contaminants

Food safety and hazard analysis is a prime concern of human life, thus quality assessment of food and water is the need of the day. Recent advances in nano-biotechnology play a significant role in providing possible solutions for developing highly sensitive and affordable detection tools for food analysis. Nanomaterials based aptasensors hold great potential to overcome the drawbacks of conventional analytical techniques. Aptamers comprise a novel class of highly specific bio-recognition elements which are produced by SELEX (systematic evolution of ligands by exponential enrichment) process. They bind to target molecules by folding into 3D structures that can discriminate different chiral compounds. The flexibility in making modifications in aptamers contribute to the design of biosensors, enabling the generation of bio-recognition elements for a wide variety of target molecules. Nanomaterials such as metal nanoparticles, metal nanoclusters, metal oxide nanoparticles, metal and carbon quantum dots, graphene, carbon nanotubes and nanocomposites enable higher sensitivity by signal amplification and introduce several novel transduction principles such as enhanced chemiluminescence, fluorescence, Raman signals, electrochemical signals, enhanced catalytic activity, and super-paramagnetic properties to the biosensor. Although there are a few reviews published recently which deal with the potential of aptamers in various fields, none are devoted exclusively to the potential of aptasensors based on nanomaterials for the analysis of food contaminants. Hence, the current review discusses several transduction systems and their principles used in aptamer based nanosensors which have been developed in the past five years, the challenges faced in their designing, along with their strengths and limitations.

Predicting the structure and interfacial activity of diblock brush, mixed brush, and Janus-grafted nanoparticles

We develop a field theoretic simulation model to study the interfacial properties of grafted nanoparticles as a function of the grafting architecture.