Drop-casting hydrogels at a liquid interface: the case of hydrophobic dipeptides

Molecular dynamics study of low molecular weight gel forming salt-triggered dipeptide

Molecular dynamics simulation method was used to study the aggregation of Na and Ca salts in different concentrations of Naphthalene-dipeptide (2NapFF) solutions. The results show that high-valence Ca2+ triggers the formation of a gel at a certain dipeptide concentration, and the low-valence Na+ system follows the aggregation law of general surfactants. The results also show that hydrophobic and electrostatic forces are the main driving forces for the formation of dipeptide aggregates, and that hydrogen bonds do not play a major role in the formation of dipeptide solution aggregates. Hydrophobic and electrostatic effects are the main driving forces for the formation of gels in dipeptide solutions triggered by Ca2+. Electrostatic attraction drives Ca2+ to form a weak coordination with four oxygen atoms on two carboxyl groups, which causes the dipeptide molecules to form a gel with a branched network structure.

Self-Assembly, Bioactivity, and Nanomaterials Applications of Peptide Conjugates with Bulky Aromatic Terminal Groups

The self-assembly and structural and functional properties of peptide conjugates containing bulky terminal aromatic substituents are reviewed with a particular focus on bioactivity. Terminal moieties include Fmoc [fluorenylmethyloxycarbonyl], naphthalene, pyrene, naproxen, diimides of naphthalene or pyrene, and others. These provide a driving force for self-assembly due to π-stacking and hydrophobic interactions, in addition to the hydrogen bonding, electrostatic, and other forces between short peptides. The balance of these interactions leads to a propensity to self-assembly, even for conjugates to single amino acids. The hybrid molecules often form hydrogels built from a network of β-sheet fibrils. The properties of these as biomaterials to support cell culture, or in the development of molecules that can assemble in cells (in response to cellular enzymes, or otherwise) with a range of fascinating bioactivities such as anticancer or antimicrobial activity, are highlighted. In addition, applications of hydrogels as slow-release drug delivery systems and in catalysis and other applications are discussed. The aromatic nature of the substituents also provides a diversity of interesting optoelectronic properties that have been demonstrated in the literature, and an overview of this is also provided. Also discussed are coassembly and enzyme-instructed self-assembly which enable precise tuning and (stimulus-responsive) functionalization of peptide nanostructures.

Spatiotemporal Control Over Base-Catalysed Hydrogelation Using a Bilayer System

Controlling the formation and directional growth of hydrogels is a challenge. In this paper, we propose a new methodology to program the gel formation both over space and time, using the diffusion and subsequent hydrolysis of 1,1'-carbonyldiimidazole (CDI) from an immiscible organic solution to the aqueous gel media. This article is protected by copyright. All rights reserved.

Complex High-Internal Phase Emulsions that can Form Interfacial Films with Tunable Morphologies

High-internal phase emulsions (HIPEs) were considered as an important functional material and have been the focus of intense development effort, but their fundamental attributes have hardly been altered at either the microcosmic or macroscopic level, which severely limits their practical applications in various areas. In this work, we report a general strategy for creating complex HIPEs that can form interfacial films at liquid interfaces. Double HIPEs and Janus HIPEs are both realized for the first time. They feature complex microscopic patterns with short-range anisotropy and exhibit non-Newtonian pseudoplastic flow behavior. By taking advantage of their response to a high-pH subphase, interfacial films can be successfully obtained, which are tunable in thickness and morphologies under compression. Complex HIPEs can greatly expand the applications of liquid materials, and the interfacial films of droplets represent an important step toward producing 2D soft materials with a unique functionality that can be broadly applied to biological processes.

Lilypad aggregation: localised self-assembly and metal sequestration at a liquid-vapour interface

Spatially resolved soft materials, such as vesicles and microgels, have shown promise as selective adsorbents and microscale reaction vessels. However, spatiotemporal control of aggregation can be difficult to achieve. In this study, nickel(ii) chloride and a dipyridyl oligo(urea) ligand were combined in a vapour-diffusion setup to produce a localised spheroidal aggregate at the liquid-vapour interface. This aggregate forms via the self-assembly and fusion of monodisperse colloids and grows until its weight is no longer counterbalanced by surface tension. A simple physical model reveals that this process, termed lilypad aggregation, is possible only for surface energies that favour neither bulk aggregation nor the growth of an interfacial film. These surface energies dictate the final size and shape of the aggregate and may be estimated through visual monitoring of its changing morphology. Lilypad aggregates sequester metal from the surrounding sol and can be collected manually from the surface of the liquid.

Controlling the Assembly and Properties of Low-Molecular-Weight Hydrogelators

Low-molecular-weight gels are formed by the self-assembly of small molecules into fibrous networks that can immobilize a significant amount of solvent. Here, we focus on our work with a specific class of gelator, the functionalized dipeptide. We discuss the current state of the art in the area, focusing on how these materials can be controlled. We also highlight interesting and unusual observations and unanswered questions in the field.

Subtle chemical modification for enrichment of Fmoc-amino acid at a phospholipid interface

Amino acids including the Fmoc group (9-fluorenylmethyloxycarbonyl) are bioinspired molecules that display intriguing features in self-assembly and biological applications. The influence of a delicate chemical modification between Fmoc-F and Fmoc-Y on the interaction with a phospholipid surface was analyzed. Langmuir monolayers of the 1,2-dimyristoyl-sn-glycero-3-phosphate (DMPA) phospholipid were used to mimic the eukaryotic cell membrane. In situ Brewster angle microscopy and UV-vis reflection spectroscopy provided insights on the effect of the Fmoc-amino acid derivatives on the DMPA phospholipid. The formation of H-bonds between the Fmoc-Y and the DMPA molecules was assessed, demonstrating the crucial role of the hydroxyl group of Fmoc-Y in enhancing the interaction with biosurfaces.

A modest chemical modification of the Fmoc-amino acids led to enhanced interaction with a model surface for biomembrane.

Unravelling the 2D self-assembly of Fmoc-dipeptides at fluid interfaces

Dipeptides self-assemble into supramolecular structures showing plenty of applications in the nanotechnology and biomedical fields. A set of Fmoc-dipeptides with different aminoacid sequences has been synthesized and their self-assembly at fluid interfaces has been assessed. The relevant molecular parameters for achieving an efficient 2D self-assembly process have been established. The self-assembled nanostructures of Fmoc-dipeptides displayed significant chirality and retained the chemical functionality of the aminoacids. The impact of the sequence on the final supramolecular structure has been evaluated in detail using in situ characterization techniques at air/water interfaces. This study provides a general route for the 2D self-assembly of Fmoc-dipeptides.

Colloidal Spherocylinders at an Interface: Flipper Dynamics and Bilayer Formation

We study the response of a film of colloidal spherocylinders to compression by combining pressure-area isotherm measurements, microscopy, and computer simulations. We find that the behavior of the film depends strongly on the geometry of the particles. For a small aspect ratio, a uniform monolayer forms and then buckles. For a higher aspect ratio, particles flip to orient perpendicular to the interface; we show that flipping occurs in locations where the nematic ordering is low. Our experiments and simulations further demonstrate that the longest particles rearrange to self-assemble a colloidal bilayer, which is stable due to the unique geometry of spherocylinders at an interface.

Nonlinear Effects in Multicomponent Supramolecular Hydrogels

Multicomponent low molecular weight gels are useful for a range of applications. However, when mixing two components, both of which can independently form a gel, there are many potential scenarios. There is a limited understanding as to how to control and direct the assembly. Here, we focus on a pH-triggered two-component system. At high pH, colloidal structures are formed, and there is a degree of mixing of the two gelators. As the pH is decreased, there is a complex situation, where one gelator directs the assembly in a "sergeants and soldiers" manner. The second gelator is not fully incorporated, and the remainder forms an independent network. The result is that there is a nonlinear dependence on the final mechanical properties of the gels, with the storage or loss modulus being very dependent on the absolute ratio of the two components in the system.

Stabilizing bubble and droplet interfaces using dipeptide hydrogels

Hydrophobic dipeptide molecules can be used to create interfacial films covering bubbles and droplets made from a range of oils.

Linking micellar structures to hydrogelation for salt-triggered dipeptide gelators

Some functionalised dipeptides can form hydrogels when salts are added to solutions at high pH. We have used surface tension, conductivity, rheology, optical, confocal and scanning electron microscopy, (1)H NMR and UV-Vis spectroscopy measurements to characterise fully the phase behaviour of solutions of one specific gelator, 2NapFF, at 25 °C at pH 10.5. We show that this specific naphthalene-dipeptide undergoes structural transformations as the concentration is increased, initially forming spherical micelles, then worm-like micelles, followed by association of these worm-like micelles. On addition of a calcium salt, gels are generally formed as long as worm-like micelles are initially present in solution, although there are structural re-organisations that occur at lower concentrations, allowing gelation at lower than expected concentration. Using IR and SANS, we show the differences between the structures present in the solution and hydrogel phases.

A Peptide-Based Mechano-sensitive, Proteolytically Stable Hydrogel with Remarkable Antibacterial Properties

A long-chain amino acid containing dipeptide has been found to form a hydrogel in phosphate buffer whose pH ranges from 6.0 to 8.8. The hydrogel formed at pH 7.46 has been characterized by small-angle X-ray scattering (SAXS), wide-angle powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM) imaging and rheological analyses. The microscopic imaging studies suggest the formation of a nanofibrillar three-dimensional (3D) network for the hydrogel. As observed visually and confirmed rheologically, the hydrogel at pH 7.46 exhibits thixotropy. This thixotropic property can be exploited to inject the peptide. Furthermore, the hydrogel exhibits remarkable antibacterial activity against Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa, which are responsible for many common diseases. The hydrogel has practical applicability due to its biocompatibility with human red blood cells and human fibroblast cells. Interestingly, this hydrogel shows high resistance toward proteolytic enzymes, making it a new potential antimicrobial agent for future applications. It has also been observed that a small change in molecular structure of the gelator peptide not only turns the gelator into a nongelator molecule under similar conditions, but it also has a significant negative impact on its bactericidal character.

Synthesis and evaluation of the biostability and cell compatibility of novel conjugates of nucleobase, peptidic epitope, and saccharide

This article reports the synthesis of a new class of conjugates containing a nucleobase, a peptidic epitope, and a saccharide and the evalution of their gelation, biostability, and cell compatibility. We demonstrate a facile synthetic process, based on solid-phase peptide synthesis of nucleopeptides, to connect a saccharide with the nucleopeptides for producing the target conjugates. All the conjugates themselves (1-8) display excellent solubility in water without forming hydrogels. However, a mixture of 5 and 8 self-assembles to form nanofibers and results in a supramolecular hydrogel. The proteolytic stabilities of the conjugates depend on the functional peptidic epitopes. We found that TTPV is proteolytic resistant and LGFNI is susceptible to proteolysis. In addition, all the conjugates are compatible to the mammalian cells tested.

Design of nanostructures based on aromatic peptide amphiphiles

Aromatic peptide amphiphiles are gaining popularity as building blocks for the bottom-up fabrication of nanomaterials, including gels. These materials combine the simplicity of small molecules with the versatility of peptides, with a range of applications proposed in biomedicine, nanotechnology, food science, cosmetics, etc. Despite their simplicity, a wide range of self-assembly behaviours have been described. Due to varying conditions and protocols used, care should be taken when attempting to directly compare results from the literature. In this review, we rationalise the structural features which govern the self-assembly of aromatic peptide amphiphiles by focusing on four segments, (i) the N-terminal aromatic component, (ii) linker segment, (iii) peptide sequence, and (iv) C-terminus. It is clear that the molecular structure of these components significantly influences the self-assembly process and resultant supramolecular architectures. A number of modes of assembly have been proposed, including parallel, antiparallel, and interlocked antiparallel stacking conformations. In addition, the co-assembly arrangements of aromatic peptide amphiphiles are reviewed. Overall, this review elucidates the structural trends and design rules that underpin the field of aromatic peptide amphiphile assembly, paving the way to a more rational design of nanomaterials based on aromatic peptide amphiphiles.