Self-assembly behavior of a linear-star supramolecular amphiphile based on host-guest complexation

Supramolecular Synthesis of Star Polymers

Supramolecular polymers, in which monomers are assembled via intermolecular interactions, have been extensively studied. The fusion of supramolecular polymers with conventional polymers has attracted the attention of many researchers. In this review article, the recent progress in the construction of supramolecular star polymers, including regular star polymers and miktoarm star polymers, is discussed. The initial sections briefly provide an overview of the conventional classification and synthesis methods for star polymers. Coordination-driven self-assembly was investigated for the supramolecular synthesis of star polymers. Star polymers with multiple polymer chains radiating from metal-organic polyhedra (MOPs) have also been described. Particular focus has been placed on the synthesis of star polymers featuring supramolecular cores formed through hydrogen-bonding-directed self-assembly. After describing the synthesis of star polymers based on host-guest complexes, the construction of miktoarm star polymers based on the molecular recognition of coordination capsules is detailed.

Novel near-infrared BODIPY-cyclodextrin complexes for photodynamic therapy

To meet the requirements of diagnosis and treatment, photodynamic therapy (PDT) is a promising cancer treatment with less side-effect. A series of novel BODIPY complexes (BODIPY-CDs) served as PDT agents were first reported to enhance the biocompatibility and water solubility of BODIPY matrix through the click reaction of alkynyl-containing BODIPY and azide-modified cyclodextrin (CD). BODIPY-CDs possessed superior water solubility due to the introduction of CD and their fluorescence emission apparently redshifted (>90 nm) on account of triazole units as the linkers compared to alkynyl-containing BODIPY. Moreover, all the BODIPY-CDs were no cytotoxicity toward NIH 3T3 in different drug concentrations from 12.5 to 200 μg/mL, and had a certain inhibitory effect on tumor HeLa cells. Particularly, BODIPY-β-CD exhibited high reactive oxygen species generation and excellent photodynamic therapy activity against HeLa cells compared to other complexes. The cell viability of BODIPY-β-CD was dramatically reduced up to 20% in the concentration of 100 μg/mL upon 808 nm laser irradiation. This architecture might provide a new opportunity to develop valuable photodynamic therapy agents for tumor cells.

One-Pot Synthesis, Circularly Polarized Luminescence, and Controlled Self-Assembly of Janus-Type Miktoarm Star Copolymers

With the aim of broadening the scope of Janus-type polymers with new functionalities, Janus-type miktoarm star copolymers comprising helical poly(phenyl isocyanide) (PPI) and a vinyl polymer were designed and synthesized via a combination of Pd(II)-initiated isocyanide polymerization and atom transfer radical polymerization (ATRP). A functional β-cyclodextrin bearing 7 Pd(II) complexes at one side and 14 bromine groups at the other side ((Pd(II))7-CD-(Br)14) was prepared and used as an initiator for the one-pot polymerization of phenyl isocyanide and the ATRP of vinyl monomers in a living and controlled manner. A variety of Janus-type copolymers with different structures and tunable compositions were facilely obtained by using this method. Thus, Janus-type copolymers composed of helical PPIs and tetraphenylethylene-modified vinyl polymers exhibited a significant circularly polarized luminescence performance in both soluble and aggregated states. Meanwhile, Janus-type copolymers containing PPIs and hydrophilic vinyl polymers presented amphiphilicity and self-assembled into diverse morphologies.

Light-dimerization telechelic alginate-based amphiphiles reinforced Pickering emulsion for 3D printing

Functional Pickering emulsions that depend on the interparticle interactions hold promise for building template materials. A novel coumarin-grafting alginate-based amphiphilic telechelic macromolecules (ATMs) undergoing photo-dimerization enhanced particle-particle interactions and changed the self-assembly behavior in solutions. The influence of self-organization of polymeric particles on the droplet size, microtopography, interfacial adsorption and viscoelasticity of Pickering emulsions were further determined by multi-scale methodology. Results showed that stronger attractive interparticle interactions of ATMs (post-UV) endowed Pickering emulsion with small droplet size (16.8 μm), low interfacial tension (9.31 mN/m), thick interfacial film, high interfacial viscoelasticity and adsorption mass, and well stability. The high yield stress, outstanding extrudability (n₁ < 1), high structure maintainability, and well shape retention ability, makes them ideal inks for direct 3D printing without any additions. The ATMs provides an increased capacity to produce stable Pickering emulsions with tailoring their interfacial performances and, providing a platform for fabricating and developing alginate-based Pickering emulsion-templated materials.

A Study on the Dual Thermo- and pH-Responsive Behaviors of Well-Defined Star-like Block Copolymers Synthesize by Combining of RAFT Polymerization and Thiol-Ene Click Reaction

A series of stimuli-responsive star-like block copolymers are synthesized via the combination of reversible addition, fragmentation chain transfer (RAFT) polymerization, and photo-initiated thiol-ene (PITE) click reaction. The controllable block ratio and block sequence, narrow distribution of molecular weight, and customized arm numbers of the star-shaped copolymers reveal the feasibility and benefits of combination of RAFT polymerization and PITE click reaction for synthesis of well-defined star-like (co)polymers. A clear insight into the relationship among the arm number, block sequence, and block ratio of the star-like block copolymers and their stimuli-responsive aggregation behavior was achieved via dynamic light scattering and UV-vis spectroscopy study. Notably, the star-like poly(acrylic acid)-b-poly(2-(dimethylamino) ethyl methacrylate) (star-PAA-b-PDMAEMA) shows higher lower critical solution temperature (LCST) compared to star-PDMAEMA-b-PAA with the same arm number and block ratio due to the inner charged PAA segments at pH > IEP. In addition, for star-like PAA-b-PDMAEMA, higher PAA content enhances the hydrophilicity of the polymer in basic solution and leads to the LCST increase, except for star-PAA1-b-PDMAEMA4 at pH = 9.0 (≈IEP). For star-PDMAEMA-b-PAA, the PAA content shows minimal effect on their LCSTs, except for the polymer in solution with pH = 9.5, which is far from their IEP. The star-like block copolymers with well-defined structure and tunable composition, especially the facile-controlled block sequence, bring us a challenging opportunity to control the stimuli-responsive properties of star-like block copolymers.

Polymeric nanostructures based on azobenzene and their biomedical applications: synthesis, self-assembly and stimuli-responsiveness

Amphiphilic polymers can self-assemble to form nanoparticles with different structures under suitable conditions. Polymer nanoparticles functionalized with aromatic azo groups are endowed with photo-responsive properties. In recent years, a variety of photoresponsive polymers and nanoparticles have been developed based on azobenzene, using different molecular design strategies and synthetic routes. This article reviews the progress of this rapidly developing research field, focusing on the structure, synthesis, assembly and response of photo-responsive polymer assemblies. According to the molecular structure, photo-responsive polymers can be divided into linear polymers containing azobenzene in a side chain, linear polymers containing azobenzene in the main chain, linear polymers containing azobenzene in an end group, branched polymers containing azobenzene and supramolecular polymers containing azobenzene. These systems have broad biomedical application prospects in the field of drug delivery and imaging applications.

Construction of Supramolecular Polymers with Different Topologies by Orthogonal Self-Assembly of Cryptand-Paraquat Recognition and Metal Coordination

Recently, metal-coordinated orthogonal self-assembly has been used as a feasible and efficient method in the construction of polymeric materials, which can also provide supramolecular self-assembly complexes with different topologies. Herein, a cryptand with a rigid pyridyl group on the third arm derived from BMP32C10 was synthesized. Through coordination-driven self-assembly with a bidentate organoplatinum(II) acceptor or tetradentate Pd(BF4)2•4CH3CN, a di-cryptand complex and tetra-cryptand complex were prepared, respectively. Subsequently, through the addition of a di-paraquat guest, linear and cross-linked supramolecular polymers were constructed through orthogonal self-assembly, respectively. By comparing their proton nuclear magnetic resonance (1H NMR) and diffusion-ordered spectroscopy (DOSY) spectra, it was found that the degrees of polymerization were dependent not only on the concentrations of the monomers but also on the topologies of the supramolecular polymers.

Polymerization of a biscalix[5]arene derivative

Recent decades have seen an increased interest in the preparation of polymers possessing host or guest moieties as the end group, which has enabled new polymeric materials such as self-healable, shape-memory, and stimuli-responsive materials. Such polymers are commonly synthesized by tethering the host or guest moieties to polymers. On the other hand, there are limited reports demonstrating the preparation of host- or guest-appended polymers by directly polymerizing the corresponding host- or guest-appended monomers, which is valuable for easy access to diverse polymers from single molecular species. However, reactive host and/or guest moieties of the monomer interfere with the polymerization reaction. Here, we report that a biscalix[5]arene host-appended molecule can be polymerized with various monomers to form the corresponding host-appended polymers. The host–guest complexation behavior of calix[5]arene-appended polymers with fullerene derivatives was studied by ¹H NMR and UV/Vis spectroscopic techniques, which revealed that the long polymer chains did not prevent host–guest complexation even when the fullerene derivative was equipped with a polymer chain. Thus, the present study shows the potential for developing polymers that have various combinations of polymer chains.

A calix[5]arene appended monomer molecule was subjected to polymerization reaction to yield corresponding methacrylate polymers. The calix[5]arene appended polymers showed excellent encapsulation capability for fullerene molecules.

The classification and application of cyclodextrin polymers: a review

After introducing the concept of cyclodextrin polymers, their classification and applications have been summarized.

Visible light mediated BODIPY/Azo/cyclodextrin based supramolecular polymer assemblies in different water content solutions

A novel visible light responsive supramolecular polymer based on oligo(ethylene glycol) modified BODIPY (BDP), tetramethoxyazobenzene (Azo) and dimeric β-cyclodextrin (β-CD-C) was reported.

Dual-responsive recurrent self-assembly of a supramolecular polymer based on the host–guest complexation interaction between β-cyclodextrin and azobenzene

A novel supramolecular polymer PAE-g-Azo@β-CD-PEG was constructed, which significantly displayed pH- and photo-dual-responsive recurrent self-assembly behaviors.

Fabrication of multi-stimuli responsive supramolecular hydrogels based on host–guest inclusion complexation of a tadpole-shaped cyclodextrin derivative with the azobenzene dimer

Multi-responsive supramolecular hydrogels, based on host–guest complexation of tadpole-shaped cyclodextrin with the azobenzene dimer, possess reversible sol–gel transition behaviors and better biocompatibility.

UV light- and thermo-responsive hierarchical assemblies based on the inclusion complexation of β-cyclodextrin and azobenzene

UV- and thermo-responsive hierarchical assemblies consisting of an umbrella-shaped supramolecular polymer have been achieved based on the inclusion complexation between β-cyclodextrin and azobenzene.

Tunable assembly and disassembly of responsive supramolecular polymer brushes

Tunable assembly and disassembly of stimuli-responsive supramolecular polymer brushes are induced by using host–guest interactions between β-cyclodextrin and azobenzene groups.

Charge-reversible and pH-responsive biodegradable micelles and vesicles from linear-dendritic supramolecular amphiphiles for anticancer drug delivery

The linear-dendritic supramolecular amphiphiles could assemble into charge-reversible and pH-responsive biodegradable micelles and vesicles.

Morphological Evolution of Self-Assembled Structures Induced by the Molecular Architecture of Supra-Amphiphiles

A series of telechelic supramolecular amphiphiles [POSS-Azo₈@(β-CD-PDMAEMA)_1→8] was accomplished by orthogonally coupling the multiarm host polymer β-cyclodextrin-poly(dimethylaminoethyl methacrylate) (β-CD-PDMAEMA) with an octatelechelic guest molecule azobenzene modified-polyhedral oligomeric silsesquioxanes (POSS-Azo₈) under different host-guest ratios. These telechelic supramolecular amphiphiles possess a rigid core and flexible corona. Increasing the multiarm host polymer coupled onto the rigid POSS core made the molecular architecture tend to be symmetrical and spherical. POSS-Azo₈@[β-CD-PDMAEMA]_1→8 could self-assemble into diverse morphologies evolving from spherical micelles, wormlike micelles, and branched aggregates to bowl-shaped vesicles. Distinct from the traditional linear amphiphilic polymers, we discovered that the self-assembly of POSS-Azo₈@[β-CD-PDMAEMA]_1→8 was dominantly regulated by their molecular architectures instead of hydrophilicity, which has also been verified using computer simulation results.

Self-Aggregation, Antibacterial Activity, and Mildness of Cyclodextrin/Cationic Trimeric Surfactant Complexes

Despite efficacious antimicrobial activity, cationic oligomeric surfactants show strong skin irritation potential due to their larger cationic charge numbers and multiple hydrophobic chains. This work reports that the incorporation of α-, β-, and γ-CDs with different cavity sizes can effectively improve the mildness of cationic ammonium trimeric surfactant DTAD with a star-shaped spacer while maintaining its high antibacterial activity. On the basis of the different cavity sizes of CDs and the asymmetry in the spacer of DTAD, the CD/DTAD mixtures form α-CD@DTAD, 2α-CD@DTAD, β-CD@DTAD, and γ-CD@DTAD complexes. Compared to DTAD, these CD/DTAD complexes show much stronger self-assembly ability with much lower critical aggregation concentrations (CAC) and form more diverse aggregates with reduced zeta potential. Just above their CACs, the CD/DTAD complexes form vesicles or solid spherical aggregates of ∼50 nm and then transform into small micelles of ∼10 nm as the concentration increases. The strong self-assembly ability and the multiple sites of hydrogen bonds of the CD/DTAD complexes endow them with high antibacterial activity against E. coli, showing a very low minimum inhibitory concentration (2.22-2.48 μM) comparable to that of DTAD. In particular, the addition of CDs significantly reduces the abilities of DTAD in solubilizing zein (a skin model protein) and in binding with zein, and the mildness decreases in the order of 2α-CD@DTAD > β-CD@DTAD > γ-CD@DTAD > α-CD@DTAD. This tendency depends on their different self-assembling structures, and the formation of vesicles is approved to be in favor of the improvement of the mildness.

Photoresponsive amphiphilic azobenzene–PEG self-assembles to form supramolecular nanostructures for drug delivery applications

Self-assembled smart nanostructures have emerged as controlled and site-specific systems for drug delivery applications.

Atomic elucidation of the cyclodextrin effects on DDT solubility and biodegradation

Different binding modes between DDT and CDs explain why only α-CD can promote the bioavailability and biodegradation of DDT by simultaneously increasing its aqueous solubility and membrane interaction.

Effect of Topological Structures on the Self-Assembly Behavior of Supramolecular Amphiphiles

Three types of azobenzene-based telechelic guest polymers, PEG-azo, azo-PEG-azo, and PEG-azo4, were synthesized by a facile method. Subsequently, a series supramolecular amphiphiles with three distinct topological structures (hemitelechelic, ditelechelic, and quadritelechelic) were constructed through coupling with host polymer β-cyclodextrin-poly(l-lactide) (β-CD-PLLA) by combined host-guest complexation. Research on the self-assembly behavior of these amphiphiles demonstrated that the variation in self-assembly was tuned by the synergistic interaction of hydrophilicity and the curvature of the polymer chains, and very importantly, the topological structure of amphiphiles demonstrated effective control of the self-assembly behavior.

Synthesis, Self-Assembly, and Photoresponsive Behavior of Tadpole-Shaped Azobenzene Polymers

Herein, we report a feasible method to prepare a tadpole-shaped PEG-POSS-(Azo)₇ polymer. The polymer self-assembled into a large vesicle in aqueous solution, undergoing reversible smooth-curling transformation responsive to UV and dark conditions. Incorporating POSS units into the azopolymer furnished quick trans-cis isomerization along a cubic orientation. The orientational isomerization formed some pores on the vesicular membrane and endowed the highly sensitive photoresponsive property. Encapsulation of various fluorescent dyes affected the hydrophilic/hydrophobic ratio of self-assemblies, causing their morphological transition from vesicles to micelles. Response to UV irradiation, the quick trans-cis isomerization resulted in rapid release of the encapsulated dyes. The intriguing photoresponsive property renders this kind of tadpole-shaped POSS hybrid azopolymer a potential for application in controlled release of drug.

Thermo-responsiveness and biocompatibility of star-shaped poly[2-(dimethylamino)ethyl methacrylate]-b-poly(sulfobetaine methacrylate) grafted on a β-cyclodextrin core

CDPDS star polymers exhibit tunable UCST behavior by varying arm density, solution pH and NaCl concentration, and can be good candidates used in biomedical relevant fields as well.