Geometric control of stem cell differentiation rate on surfaces

Molecular-scale substrate anisotropy, crowding and division drive collective behaviours in cell monolayers

The ability of cells to reorganize in response to external stimuli is important in areas ranging from morphogenesis to tissue engineering. While nematic order is common in biological tissues, it typically only extends to small regions of cells interacting via steric repulsion. On isotropic substrates, elongated cells can co-align due to steric effects, forming ordered but randomly oriented finite-size domains. However, we have discovered that flat substrates with nematic order can induce global nematic alignment of dense, spindle-like cells, thereby influencing cell organization and collective motion and driving alignment on the scale of the entire tissue. Remarkably, single cells are not sensitive to the substrate's anisotropy. Rather, the emergence of global nematic order is a collective phenomenon that requires both steric effects and molecular-scale anisotropy of the substrate. To quantify the rich set of behaviours afforded by this system, we analyse velocity, positional and orientational correlations for several thousand cells over days. The establishment of global order is facilitated by enhanced cell division along the substrate's nematic axis, and associated extensile stresses that restructure the cells' actomyosin networks. Our work provides a new understanding of the dynamics of cellular remodelling and organization among weakly interacting cells.

Hierarchically Structured Surfaces Prepared by Phase Separation: Tissue Mimicking Culture Substrate

The pseudo 3D hierarchical structure mimicking in vivo microenvironment was prepared by phase separation on tissue culture plastic. For surface treatment, time-sequenced dosing of the solvent mixture with various concentrations of polymer component was used. The experiments showed that hierarchically structured surfaces with macro, meso and micro pores can be prepared with multi-step phase separation processes. Changes in polystyrene surface topography were characterized by atomic force microscopy, scanning electron microscopy and contact profilometry. The cell proliferation and changes in cell morphology were tested on the prepared structured surfaces. Four types of cell lines were used for the determination of impact of the 3D architecture on the cell behavior, namely the mouse embryonic fibroblast, human lung carcinoma, primary human keratinocyte and mouse embryonic stem cells. The increase of proliferation of embryonic stem cells and mouse fibroblasts was the most remarkable. Moreover, the embryonic stem cells express different morphology when cultured on the structured surface. The acquired findings expand the current state of knowledge in the field of cell behavior on structured surfaces and bring new technological procedures leading to their preparation without the use of problematic temporary templates or additives.

Bidirectional differentiation of BMSCs induced by a biomimetic procallus based on a gelatin-reduced graphene oxide reinforced hydrogel for rapid bone regeneration

Developmental engineering strategy needs the biomimetic composites that can integrate the progenitor cells, biomaterial matrices and bioactive signals to mimic the natural bone healing process for faster healing and reconstruction of segmental bone defects. We prepared the gelatin-reduced graphene oxide (GOG) and constructed the composites that mimicked the procallus by combining the GOG with the photo-crosslinked gelatin hydrogel. The biological effects of the GOG-reinforced composites could induce the bi-differentiation of bone marrow stromal cells (BMSCs) for rapid bone repair. The proper ratio of GOG in the composites regulated the composites' mechanical properties to a suitable range for the adhesion and proliferation of BMSCs. Besides, the GOG-mediated bidirectional differentiation of BMSCs, including osteogenesis and angiogenesis, could be activated through Erk1/2 and AKT pathway. The methyl vanillate (MV) delivered by GOG also contributed to the bioactive signals of the biomimetic procallus through priming the osteogenesis of BMSCs. During the repair of the calvarial defect in vivo, the initial hypoxic condition due to GOG in the composites gradually transformed into a well-vasculature robust situation with the bi-differentiation of BMSCs, which mimicked the process of bone healing resulting in the rapid bone regeneration. As an inorganic constituent, GOG reinforced the organic photo-crosslinked gelatin hydrogel to form a double-phase biomimetic procallus, which provided the porous extracellular matrix microenvironment and bioactive signals for the bi-directional differentiation of BMSCs. These show a promised application of the bio-reduced graphene oxide in biomedicine with a developmental engineering strategy.

Controllable design of a nano-bio aptasensing interface based on tetrahedral framework nucleic acids in an integrated microfluidic platform

The limited reaction time and sample volume in the confined space of microfluidic devices give considerable importance to the development of more effective biosensing interfaces. Herein, the self-assembling of tetrahedral framework nucleic acids (FNAs) with controllable size on the interface of the microfluidic microchannels is studied. Compared with macroscopic turbulence control on traditional micro-structured microfluidic surface, the novel FNA-engineered microfluidic interface successfully constructs a 3D reaction space at nanoscale by raising DNA probes away from the surface. This FNA interface dramatically improves the reaction kinetics during molecular recognition due to extremely ordered orientation, configuration and density of DNA probes on the surface. Finally, the FNA-engineered interface is applied in a novel multi-functional microfluidic platform, towards a "one-stop" assay of Escherichia coli O157: H7 (E. coli O157: H7), integrating capture, release, enrichment, cell culture and antimicrobial susceptibility testing (AST). With the FNA-aptamer probe, we achieved an enhanced bacterial detecting efficiency (10 CFU/mL) plus excellent selectivity and precision. The appicability was strongly demonstrated when the biosensor was successfully applied in real samples, including the analysis of antibiotic susceptibility and minimum inhibitory concentration (MIC) of E. coli O157: H7 among different antibiotics. The application of FNA interface will open a wide avenue for the development of microfluidic biosensors for other pathogenic microorganisms or circulating tumor cells (CTC) simply by changing the aptamers.

A theoretical model of collective cell polarization and alignment

Collective cell polarization and alignment play important roles in tissue morphogenesis, wound healing and cancer metastasis. How cells sense the direction and position in these processes, however, has not been fully understood. Here we construct a theoretical model based on describing cell layer as a nemato-elastic medium, by which the cell polarization, cell alignment and cell active contraction are explicitly expressed as functions of components of the nematic order parameter. To determine the order parameter we derive two sets of governing equations, one for the force equilibrium of the system, and the other for the minimization of the system's free energy including the energy of cell polarization and alignment. By solving these coupled governing equations, we can predict the effects of substrate stiffness, geometries of cell layers, external forces and myosin activity on the direction- and position-dependent cell aspect ratio and cell orientation. Moreover, the axisymmetric problem with cells on a ring-like pattern is solved analytically, and the analytical solution for cell aspect ratio are governed by parameter groups which include the stiffness of the cell and the substrate, the strength of myosin activity and the external forces. Our predictions of the cell aspect ratio and orientation are generally comparable to experimental observations. These results show that the pattern of cell polarization is determined by the anisotropic degree of active contractile stress, and suggest a stress-driven polarization mechanism that enables cells to sense their spatial positions to develop direction- and position-dependent behavior. This, in turn, sheds light on the ways to control pattern formation in tissue engineering for potential biomedical applications.

P-Selectin and ICAM-1 synergy in mediating THP-1 monocyte adhesion in hemodynamic flow is length dependent

The tightly orchestrated recruitment of monocytes, whose progeny are critical to the progression and resolution of various physiological and pathophysiological processes, is implicated in the time course, severity, and resolution of pathology. Using a microfluidic-based cell adhesion assay integrating spatiotemporal analyses and micropatterning of adhesive proteins, we interrogated the effects of adhesive molecule presentation length, which varies in vivo with disease and stage, on THP-1 monocyte cell rolling versus firm adhesion mediated by P-selectin and/or ICAM-1 in hemodynamic flow. Our results indicate that co-presentation of P-selectin and ICAM-1 substantially decreases the length of adhesive substrate required to sustain adhesion in flow and that P-selectin functions synergistically with ICAM-1 to substantially enhance THP-1 firm adhesion. This synergy was found to furthermore correlate with diminished cell rolling velocities and length-enhanced secondary cell capture. Our results suggest pathophysiological ramifications for local remodeling of the inflamed microvascular microenvironment in directing the efficiency of monocyte trafficking.

Scaffolds containing chitosan, gelatin and graphene oxide for bone tissue regeneration in vitro and in vivo

Critical-sized bone defects are augmented with cell free and cell loaded constructs to bridge bone defects. Improving the properties of three-dimensional scaffolds with multiple polymers and others is of growing interest in recent decades. Chitosan (CS), a natural biopolymer has limitations for its use in bone regeneration, and its properties can be enhanced with other materials. In the present study, the composite scaffolds containing CS, gelatin (Gn) and graphene oxide (GO) were fabricated through freeze-drying. These scaffolds (GO/CS/Gn) were characterized by the SEM, Raman spectra, FT-IR, EDS, swelling, biodegradation, protein adsorption and biomineralization studies. The inclusion of GO in the CS/Gn scaffolds showed better physico-chemical properties. The GO/CS/Gn scaffolds were cyto-friendly to rat osteoprogenitor cells, and they promoted differentiation of mouse mesenchymal stem cells into osteoblasts. The scaffolds also accelerated bridging of the rat tibial bone defect with increased collagen deposition in vivo. Hence, these results strongly suggested the potential nature of GO/CS/Gn scaffolds for their application in bone tissue regeneration.

Fe3O4/BSA particles induce osteogenic differentiation of mesenchymal stem cells under static magnetic field

Differentiation of stem cells is influenced by many factors, yet uptake of the magnetic particles with or without magnetic field is rarely tackled. In this study, iron oxide nanoparticles-loaded bovine serum albumin (BSA) (Fe₃O₄/BSA) particles were prepared, which showed a spherical morphology with a diameter below 200 nm, negatively charged surface, and tunable magnetic property. The particles could be internalized into bone marrow mesenchymal stem cells (MSCs), and their release from the cells was significantly retarded under external magnetic field, resulting in almost twice intracellular amount of the particles within 21 d compared to that of the magnetic field free control. Uptake of the Fe₃O₄/BSA particles enhanced significantly the osteogenic differentiation of MSCs under a static magnetic field, as evidenced by elevated alkaline phosphatase (ALP) activity, calcium deposition, and expressions of collagen type I and osteocalcin at both mRNA and protein levels. Therefore, uptake of the Fe₃O₄/BSA particles brings significant influence on the differentiation of MSCs under magnetic field, and thereby should be paid great attention for practical applications.

STATEMENT OF SIGNIFICANCE

Differentiation of stem cells is influenced by many factors, yet uptake of the magnetic particles with or without magnetic field is rarely tackled. In this study, iron oxide nanoparticles-loaded bovine serum albumin (BSA) (Fe₃O₄/BSA) particles with a diameter below 200nm, negatively charged surface, tunable Fe₃O₄ content and subsequently adjustable magnetic property were prepared. The particles could be internalized into bone marrow mesenchymal stem cells (MSCs), and their release from the cells was significantly retarded under external magnetic field. Uptake of the Fe₃O₄/BSA particles enhanced significantly the osteogenic differentiation of MSCs under a constant static magnetic field, while the magnetic particles and external magnetic field alone do not influence significantly the osteogenic differentiation potential of MSCs regardless of the uptake amount. The results demonstrate a potential magnetic manipulation method for stem cell differentiation, and also convey the significance of careful evaluation of the safety issue of magnetic particles in real an application situation.

Dissecting Collective Cell Behavior in Polarization and Alignment on Micropatterned Substrates

Pattern-dependent collective behaviors of cells have recently raised intensive attention. However, the underlying mechanisms that regulate these behaviors are largely elusive. Here, we report a quantitative study, combining experiment and modeling, on cell polarization and arrangement on a micropatterned substrate. We show that cells exhibit position-dependent collective behaviors that can be regulated by geometry and stiffness of the patterned substrate. We find that the driving force for these collective behaviors is the in-plane maximum shear stress in the cell layer that directs the arrangement of cells. The larger the shear stress, the more the cells preferentially align and polarize along the direction of the maximum principal stress. We also find that the aspect ratio of cell polarization shape and the degree to which cells preferentially align along the direction of maximum principal stress exhibit a biphasic dependence on substrate rigidity, corresponding to our quantitative predictions that the magnitude of the maximum shear stress is biphasically dependent on the stiffness of the substrate. As such, the driving force of these cell collective behaviors can be quantified using the maximum shear stress.

Micropatterning control of tubular commitment in human adult renal stem cells

The treatment of renal injury by autologous, patient-specific adult stem cells is still an unmet need. Unsolved issues remain the spatial integration of stem cells into damaged areas of the organ, the commitment in the required cell type and the development of improved bioengineered devices. In this respect, biomaterials and architectures have to be specialized to control stem cell differentiation. Here, we perform an extensive study on micropatterned extracellular matrix proteins, which constitute a simple and non-invasive approach to drive the differentiation of adult renal progenitor/stem cells (ARPCs) from human donors. ARPCs are interfaced with fibronectin (FN) micropatterns, in the absence of exogenous chemicals or cellular reprogramming. We obtain the differentiation towards tubular cells of ARPCs cultured in basal medium conditions, the tubular commitment thus being specifically induced by micropatterned substrates. We characterize the stability of the tubular differentiation as well as the induction of a polarized phenotype in micropatterned ARPCs. Thus, the developed cues, driving the functional commitment of ARPCs, offer a route to recreate the microenvironment of the stem cell niche in vitro, that may serve, in perspective, for the development of ARPC-based bioengineered devices.

Concise Review: Stem Cell Microenvironment on a Chip: Current Technologies for Tissue Engineering and Stem Cell Biology

Stem cells have huge potential in many therapeutic areas. With conventional cell culture methods, however, it is difficult to achieve in vivo-like microenvironments in which a number of well-controlled stimuli are provided for growing highly sensitive stem cells. In contrast, microtechnology-based platforms offer advantages of high precision, controllability, scalability, and reproducibility, enabling imitation of the complex physiological context of in vivo. This capability may fill the gap between the present knowledge about stem cells and that required for clinical stem cell-based therapies. We reviewed the various types of microplatforms on which stem cell microenvironments are mimicked. We have assigned the various microplatforms to four categories based on their practical uses to assist stem cell biologists in using them for research. In particular, many examples are given of microplatforms used for the production of embryoid bodies and aggregates of stem cells in vitro. We also categorized microplatforms based on the types of factors controlling the behaviors of stem cells. Finally, we outline possible future directions for microplatform-based stem cell research, such as research leading to the production of well-defined environments for stem cells to be used in scaled-up systems or organs-on-a-chip, the regulation of induced pluripotent stem cells, and the study of the genetic states of stem cells on microplatforms.

SIGNIFICANCE

Stem cells are highly sensitive to a variety of physicochemical cues, and their fate can be easily altered by a slight change of environment; therefore, systematic analysis and discrimination of the extracellular signals and intracellular pathways controlling the fate of cells and experimental realization of sensitive and controllable niche environments are critical. This review introduces diverse microplatforms to provide in vitro stem cell niches. Microplatforms could control microenvironments around cells and have recently attracted much attention in biology including stem cell research. These microplatforms and the future directions of stem cell microenvironment are described.

A molecular smart surface for spatio-temporal studies of cell mobility

Active migration in both healthy and malignant cells requires the integration of information derived from soluble signaling molecules with positional information gained from interactions with the extracellular matrix and with other cells. How a cell responds and moves involves complex signaling cascades that guide the directional functions of the cytoskeleton as well as the synthesis and release of proteases that facilitate movement through tissues. The biochemical events of the signaling cascades occur in a spatially and temporally coordinated manner then dynamically shape the cytoskeleton in specific subcellular regions. Therefore, cell migration and invasion involve a precise but constantly changing subcellular nano-architecture. A multidisciplinary effort that combines new surface chemistry and cell biological tools is required to understand the reorganization of cytoskeleton triggered by complex signaling during migration. Here we generate a class of model substrates that modulate the dynamic environment for a variety of cell adhesion and migration experiments. In particular, we use these dynamic substrates to probe in real-time how the interplay between the population of cells, the initial pattern geometry, ligand density, ligand affinity and integrin composition affects cell migration and growth. Whole genome microarray analysis indicates that several classes of genes ranging from signal transduction to cytoskeletal reorganization are differentially regulated depending on the nature of the surface conditions.

Fabrication of micropatterned polymeric nanowire arrays for high-resolution reagent localization and topographical cellular control

Herein, we present a novel approach for the fabrication of micropatterned polymeric nanowire arrays that addresses the current need for scalable and customizable polymer nanofabrication. We describe two variations of this approach for the patterning of nanowire arrays on either flat polymeric films or discrete polymeric microstructures and go on to investigate biological applications for the resulting polymeric features. We demonstrate that the micropatterned arrays of densely packed nanowires facilitate rapid, low-waste drug and reagent localization with micron-scale resolution as a result of their high wettability. We also show that micropatterned nanowire arrays provide hierarchical cellular control by simultaneously directing cell shape on the micron scale and influencing focal adhesion formation on the nanoscale. This nanofabrication approach has potential applications in scaffold-based cellular control, biological assay miniaturization, and biomedical microdevice technology.

Control of stem cell fate by engineering their micro and nanoenvironment

Stem cells are capable of long-term self-renewal and differentiation into specialised cell types, making them an ideal candidate for a cell source for regenerative medicine. The control of stem cell fate has become a major area of interest in the field of regenerative medicine and therapeutic intervention. Conventional methods of chemically inducing stem cells into specific lineages is being challenged by the advances in biomaterial technology, with evidence highlighting that material properties are capable of driving stem cell fate. Materials are being designed to mimic the clues stem cells receive in their in vivo stem cell niche including topographical and chemical instructions. Nanotopographical clues that mimic the extracellular matrix (ECM) in vivo have shown to regulate stem cell differentiation. The delivery of ECM components on biomaterials in the form of short peptides sequences has also proved successful in directing stem cell lineage. Growth factors responsible for controlling stem cell fate in vivo have also been delivered via biomaterials to provide clues to determine stem cell differentiation. An alternative approach to guide stem cells fate is to provide genetic clues including delivering DNA plasmids and small interfering RNAs via scaffolds. This review, aims to provide an overview of the topographical, chemical and molecular clues that biomaterials can provide to guide stem cell fate. The promising features and challenges of such approaches will be highlighted, to provide directions for future advancements in this exciting area of stem cell translation for regenerative medicine.

Influence of bovine serum albumin coated poly(lactic-co-glycolic acid) particles on differentiation of mesenchymal stem cells

The presence of PLGA–BSA particles can induce osteogenesis differentiation of mesenchymal stem cells, and meanwhile inhibit their adipogenic differentiation.

Laser fabrication of porous silicon-based platforms for cell culturing

In this study, we explore the selective culturing of human mesenchymal stem cells (hMSCs) on Si-based diffractive platforms. We demonstrate a single-step and flexible method for producing platforms on nanostructured porous silicon (nanoPS) based on the use of single pulses of an excimer laser to expose phase masks. The resulting patterns are typically 1D patterns formed by fringes or 2D patterns formed by circles. They are formed by alternate regions of almost unmodified nanoPS and regions where the nanoPS surface has melted and transformed into Si nanoparticles. The patterns are produced in relatively large areas (a few square millimeters) and can have a wide range of periodicities and aspect ratios. Direct binding, that is, with no previous functionalization of the pattern, alignment, and active polarization of hMSCs are explored. The results show the preferential direct binding of the hMSCs along the transformed regions whenever their width compares with the dimensions of the cells and they escape from patterns for smaller widths suggesting that the selectivity can be tailored through the pattern period.

Fabrication of hydrogel with cell adhesive micropatterns for mimicking the oriented tumor-associated extracellular matrix

For mimicking the fibrous extracellular matrix (ECM), a facile method for patterning anticell adhesive substrate was novelly applied on agarose hydrogel. Without using masks or templates for etching, we applied the magnetic field-induced colloidal assembly of magnetic nanoparticles on the flat agarose hydrogel to form cell-adhesive micropatterns. Meanwhile, tuning the hydrogel substrate's modulus to fit real tissue was experimentally demonstrated. Magnetic nanobeads were also assembled on this hydrogel surface and formed more complete and regular patterns. The patterned hydrogel substrate could actually influence behaviors of different cancer cells, including adhesion, growth, and migration.

Cell-imprinted substrates direct the fate of stem cells

Smart nanoenvironments were obtained by cell-imprinted substrates based on mature and dedifferentiated chondrocytes as templates. Rabbit adipose derived mesenchymal stem cells (ADSCs) seeded on these cell-imprinted substrates were driven to adopt the specific shape (as determined in terms of cell morphology) and molecular characteristics (as determined in terms of gene expression) of the cell types which had been used as template for the cell-imprinting. This method might pave the way for a reliable, efficient, and cheap way of controlling stem cell differentiation. Data also suggest that besides residual cellular fragments, which are presented on the template surface, the imprinted topography of the templates plays a role in the differentiation of the stem cells.

Mechanoregulation of stem cell fate via micro-/nano-scale manipulation for regenerative medicine

Recent developments in the field of mechanobiology have renewed the call for a better understanding of the role of mechanical forces as potent regulators and indicators of stem cell fate. Although it is well established that mechanical forces play a crucial role in guiding tissue development, little is known about how submicroscopic biomechanical forces can influence key stem cell behaviors. This review will detail the use of micro-/nano-technologies that are advancing our current understanding of stem cell mechanobiology, and mechanoregulation of stem cell fate using engineered surface topographies and small-scale patterning techniques. The involvement of focal adhesions and the cytoskeleton systems as a common biophysical impetus through which these mechanical signals are transduced via distinct signaling pathways will also be discussed. These insights are envisioned to provide the basis for the rational design of future biocompatible materials and may inspire alternative drug-free therapeutic strategies to manage diseased sites via biomechanical management.

Laser fabrication of porous silicon-based platforms for cell culturing

In this study, we explore the selective culturing of human mesenchymal stem cells (hMSCs) on Si-based diffractive platforms. We demonstrate a single-step and flexible method for producing platforms on nanostructured porous silicon (nanoPS) based on the use of single pulses of an excimer laser to expose phase masks. The resulting patterns are typically 1D patterns formed by fringes or 2D patterns formed by circles. They are formed by alternate regions of almost unmodified nanoPS and regions where the nanoPS surface has melted and transformed into Si nanoparticles. The patterns are produced in relatively large areas (a few square millimeters) and can have a wide range of periodicities and aspect ratios. Direct binding, that is, with no previous functionalization of the pattern, alignment, and active polarization of hMSCs are explored. The results show the preferential direct binding of the hMSCs along the transformed regions whenever their width compares with the dimensions of the cells and they escape from patterns for smaller widths suggesting that the selectivity can be tailored through the pattern period. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2013.

Chemical and physical properties of regenerative medicine materials controlling stem cell fate

Regenerative medicine is a multidisciplinary field utilizing the potential of stem cells and the regenerative capability of the body to restore, maintain, or enhance tissue and organ functions. Stem cells are unspecialized cells that can self-renew but also differentiate into several somatic cells when subjected the appropriate environmental cues. The ability to reliably direct stem cell fate would provide tremendous potential for basic research and clinical therapies. Proper tissue function and regeneration rely on the spatial and temporal control of biophysical and biochemical cues, including soluble molecules, cell-cell contacts, cell-extracellular matrix contacts, and physical forces. The mechanisms involved remain poorly understood. This review focuses on the stem cell-extracellular matrix interactions by summarizing the observations of the effects of material variables (such as overall architecture, surface topography, charge, ζ-potential, surface energy, and elastic modulus) on the stem cell fate. It also deals with the mechanisms underlying the effects of these extrinsic, material variables. Insight in the environmental interactions of the stem cells is crucial for the development of new material-based approaches for cell culture experiments and future experimental and clinical regenerative medicine applications.

Controlling self-renewal and differentiation of stem cells via mechanical cues

The control of stem cell response in vitro, including self-renewal and lineage commitment, has been proved to be directed by mechanical cues, even in the absence of biochemical stimuli. Through integrin-mediated focal adhesions, cells are able to anchor onto the underlying substrate, sense the surrounding microenvironment, and react to its properties. Substrate-cell and cell-cell interactions activate specific mechanotransduction pathways that regulate stem cell fate. Mechanical factors, including substrate stiffness, surface nanotopography, microgeometry, and extracellular forces can all have significant influence on regulating stem cell activities. In this paper, we review all the most recent literature on the effect of purely mechanical cues on stem cell response, and we introduce the concept of "force isotropy" relevant to cytoskeletal forces and relevant to extracellular loads acting on cells, to provide an interpretation of how the effects of insoluble biophysical signals can be used to direct stem cells fate in vitro.

Nanostructured porous silicon micropatterns as a tool for substrate-conditioned cell research

The localized irradiation of Si allows a precise patterning at the microscale of nanostructured materials such as porous silicon (PS). PS patterns with precisely defined geometries can be fabricated using ion stopping masks. The nanoscale textured micropatterns were used to explore their influence as microenvironments for human mesenchymal stem cells (hMSCs). In fact, the change of photoluminescence emission from PS upon aging in physiological solution suggests the intense formation of silanol surface groups, which may play a relevant role in ulterior cell adhesion. The experimental results show that hMSCs are sensitive to the surface micropatterns. In this regard, preliminary β-catenin labeling studies reveal the formation of cell to cell interaction structures, while microtubule orientation is strongly influenced by the selective adhesion conditions. Relevantly, Ki-67 assays support a proliferative state of hMSCs on such nanostructured micropatterns comparable to that of standard cell culture platforms, which reinforce the candidature of porous silicon micropatterns to become a conditioning structure for in vitro culture of HMSCs.

Microengineered synthetic cellular microenvironment for stem cells

Stem cells possess the ability of self-renewal and differentiation into specific cell types. Therefore, stem cells have great potentials in fundamental biology studies and clinical applications. The most urgent desire for stem cell research is to generate appropriate artificial stem cell culture system, which can mimic the dynamic complexity and precise regulation of the in vivo biochemical and biomechanical signals, to regulate and direct stem cell behaviors. Precise control and regulation of the biochemical and biomechanical stimuli to stem cells have been successfully achieved using emerging micro/nanoengineering techniques. This review provides insights into how these micro/nanoengineering approaches, particularly microcontact printing and elastomeric micropost array, are applied to create dynamic and complex environment for stem cells culture.

Porous membrane substrates offer better niches to enhance the Wnt signaling and promote human embryonic stem cell growth and differentiation

Human embryonic stem cells (hESCs) require specific niches for adhesion, expansion, and lineage-specific differentiation. In this study, we showed that a membrane substrate offers better tissue niches for hESC attachment, spreading, proliferation, and differentiation. The cell doubling time was shortened from 46.3±5.7 h for hESCs grown on solid substrates to 25.6±2.6 h for those on polyester (PE) membrane substrates with pore size of 0.4 μm. In addition, we observed an increase of approximately five- to ninefold of definitive endoderm marker gene expression in hESCs differentiated on PE or polyethylene terephthalate membrane substrates. Global gene expression analysis revealed upregulated expressions of a number of extracellular matrix and cell adhesion molecules in hESCs grown on membrane substrates. Further, an enhanced nuclear translocation of β-catenin was detected in these cells. These observations suggested the augmentation of Wnt signaling in hESCs grown on membrane substrates. These results also demonstrated that a membrane substrate can offer better physicochemical cues for enhancing in vitro hESC attachment, proliferation, and differentiation.

Forcing stem cells to behave: a biophysical perspective of the cellular microenvironment

Physical factors in the local cellular microenvironment, including cell shape and geometry, matrix mechanics, external mechanical forces, and nanotopographical features of the extracellular matrix, can all have strong influences on regulating stem cell fate. Stem cells sense and respond to these insoluble biophysical signals through integrin-mediated adhesions and the force balance between intracellular cytoskeletal contractility and the resistant forces originated from the extracellular matrix. Importantly, these mechanotransduction processes can couple with many other potent growth-factor-mediated signaling pathways to regulate stem cell fate. Different bioengineering tools and microscale/nanoscale devices have been successfully developed to engineer the physical aspects of the cellular microenvironment for stem cells, and these tools and devices have proven extremely powerful for identifying the extrinsic physical factors and their downstream intracellular signaling pathways that control stem cell functions.

Engineering of silicon surfaces at the micro- and nanoscales for cell adhesion and migration control

The engineering of surface patterns is a powerful tool for analyzing cellular communication factors involved in the processes of adhesion, migration, and expansion, which can have a notable impact on therapeutic applications including tissue engineering. In this regard, the main objective of this research was to fabricate patterned and textured surfaces at micron- and nanoscale levels, respectively, with very different chemical and topographic characteristics to control cell–substrate interactions. For this task, one-dimensional (1-D) and two-dimensional (2-D) patterns combining silicon and nanostructured porous silicon were engineered by ion beam irradiation and subsequent electrochemical etch. The experimental results show that under the influence of chemical and morphological stimuli, human mesenchymal stem cells polarize and move directionally toward or away from the particular stimulus. Furthermore, a computational model was developed aiming at understanding cell behavior by reproducing the surface distribution and migration of human mesenchymal stem cells observed experimentally.

Combination of integrin-binding peptide and growth factor promotes cell adhesion on electron-beam-fabricated patterns

Understanding and controlling cell adhesion on engineered scaffolds is important in biomaterials and tissue engineering. In this report we used an electron-beam (e-beam) lithography technique to fabricate patterns of a cell adhesive integrin ligand combined with a growth factor. Specifically, micron-sized poly(ethylene glycol) (PEG) hydrogels with aminooxy- and styrene sulfonate-functional groups were fabricated. Cell adhesion moieties were introduced using a ketone-functionalized arginine-glycine-aspartic acid (RGD) peptide to modify the O-hydroxylamines by oxime bond formation. Basic fibroblast growth factor (bFGF) was immobilized by electrostatic interaction with the sulfonate groups. Human umbilical vein endothelial cells (HUVECs) formed focal adhesion complexes on RGD- and RGD and bFGF-immobilized patterns as shown by immunostaining of vinculin and actin. In the presence of both bFGF and RGD, cell areas were larger. The data demonstrate confinement of cellular focal adhesions to chemically and physically well-controlled microenvironments created by a combination of e-beam lithography and "click" chemistry techniques. The results also suggest positive implications for addition of growth factors into adhesive patterns for cell-material interactions.

Biomolecular modification of carbon nanotubes for studies of cell adhesion and migration

We report a strategy for tailoring and patterning carbon nanotubes (CNTs) for biospecific cell studies. We synthesized a new electroactive hydroquinone terminated pyrene molecule to tailor CNTs. These modified CNTs can be oxidized and chemoselectively reacted with oxyamine tethered ligands to generate various ligand tethered CNTs. A cell adhesive Arg-Gly-Asp peptide (RGD) is immobilized to the CNTs and a new microfluidic patterning method is employed to generate multiplex patterned surfaces for biospecific cell adhesion and migration studies. This work demonstrates the integration of a new functionalization strategy to immobilize a variety of ligands to CNTs for a range of potential drug delivery, tissue imaging and cellular behavior studies and a microfluidic patterning strategy for generating complex high-throughput surfaces for biotechnological and cell based assay applications.

Osteogenesis of human mesenchymal stem cells on micro-patterned surfaces

Osteogenic responses of human mesenchymal stromal cells (hMSCs) were compared on square-patterned, inverse square-patterned, and planar titanium, chromium, diamond-like carbon (DLC), and tantalum; hypothesis was that both the materials and patterns affect osteogenesis. Samples were produced using photolithography and physical vapor deposition. Early-marker alkaline phosphatase (ALP) and mid-markers, small body size and mothers against decapentaplegic-related protein-1 (SMAD1), runt-related transcription factor-2 (RUNX2), and osteopontin were studied using quantitative real-time polymerase chain reaction. ALP and hydroxyapatite, were colorimetrically studied. ALP reached highest values on both patterned titanium samples, but mid-markers disclosed that it was already lagging behind planar and inverse patterned tantalum. Hydroxyapatite formation disclosed that osteo-induced hMSCs passed all the differentiation stages (except on planar chromium). Presence of hydroxyapatite disclosed that both types of patterning promoted ( p < 0.001) osteogenesis compared to planar samples. Results suggest that the osseocompatibility/integration of implants could be improved by changing the monotonous and featureless implant–host interface into micro-patterned interface to provide physical differentiation cues.

Adipogenic differentiation of individual mesenchymal stem cell on different geometric micropatterns

Micropatterned surfaces are very useful to control cell microenvironment and investigate the physical effects on cell function. In this study, poly(vinyl alcohol) (PVA) micropatterns on polystyrene cell-culture plates were prepared using UV photolithography. Cell adhesive polystyrene geometries of triangle, square, pentagon, hexagon, and circle were surrounded by cell nonadhesive PVA to manipulate cell shapes. These different geometries had the same small surface areas for cell spreading. Human mesenchymal stem cells (MSCs) were cultured on the micropatterned surface, and the effect of cell geometry on adipogenic differentiation was investigated. MSCs adhered to the geometric micropatterns and formed arrays of single cell with different shapes. The distribution patterns of actin filaments were similar among these cell shapes and remolded during adipogenesis. The adipogenic differentiation potential of MSCs was similar on the small size triangular, square, pentagonal, hexagonal, and circular geometries according to lipid vacuoles staining. This simple micropatterning technique using photoreactive molecules will be useful for creating micropatterns of arbitrary design on an organic surface, and cell functions can be directly and systematically compared on a single surface without external factors resulting from separate cell culture and coating method.

Fabrication and selective functionalization of amine-reactive polymer multilayers on topographically patterned microwell cell culture arrays

We report an approach to the fabrication and selective functionalization of amine-reactive polymer multilayers on the surfaces of 3-D polyurethane-based microwell cell culture arrays. "Reactive" layer-by-layer assembly of multilayers using branched polyethyleneimine (BPEI) and the azlactone-functionalized polymer poly(2-vinyl-4,4'-dimethylazlactone) (PVDMA) yielded film-coated microwell arrays that could be chemically functionalized postfabrication by treatment with different amine-functionalized macromolecules or small molecule primary amines. Treatment of film-coated arrays with the small molecule amine d-glucamine resulted in microwell surfaces that resisted the adhesion and proliferation of mammalian fibroblast cells in vitro. These and other experiments demonstrated that it was possible to functionalize different structural features of these arrays in a spatially resolved manner to create dual-functionalized substrates (e.g., to create arrays having either (i) azlactone-functionalized wells, with regions between the wells functionalized with glucamine or (ii) substrates with spatially resolved regions of two different cationic polymers). In particular, spatial control over glucamine functionalization yielded 3-D substrates that could be used to confine cell attachment and growth to microwells for periods of up to 28 days and support the 3-D culture of arrays of cuboidal cell clusters. These approaches to dual functionalization could prove useful for the long-term culture and maintenance of cell types for which the presentation of specific and chemically well-defined 3-D culture environments is required for control over cell growth, differentiation, and other important behaviors. More generally, our approach provides methods for the straightforward chemical functionalization of otherwise unreactive topographically patterned substrates that could prove to be useful in a range of other fundamental and applied contexts.

Synergistically enhanced osteogenic differentiation of human mesenchymal stem cells by culture on nanostructured surfaces with induction media

We have examined the effects of surface nanotopography on in vitro osteogenesis of human mesenchymal stem cells (hMSCs). UV-assisted capillary force lithography was employed to fabricate a scalable (4x5 cm), well-defined nanostructured substrate of a UV curable polyurethane polymer with dots (150, 400, 600 nm diameter) and lines (150, 400, 600 nm width). The influence of osteogenic differentiation of hMSCs was characterized at day 8 by alkaline phosphatase (ALP) assay, RT-PCR, and real-time PCR analysis. We found that hMSCs cultured on the nanostructured surfaces in osteogenic induction media showed significantly higher ALP activity compared to unpatterned PUA surface (control group). In particular, the hMSCs on the 400 nm dot pattern showed the highest level of ALP activity. Further investigation with real-time quantitative RT-PCR analysis demonstrated significantly higher expression of core binding factor 1 (Cbfa1), osteopontin (OP), and osteocalcin (OC) levels in hMSCs cultured on the 400 nm dot pattern in osteogenic induction media. These findings suggest that surface nanotopography can enhance osteogenic differentiation synergistically with biochemical induction substance.

Lab-on-a-chip devices as an emerging platform for stem cell biology

The advent of stem cell based therapies has brought regenerative medicine into an increased focus as a part of the modern medicine practice, with a potential to treat a myriad of intractable diseases in the future. Stem cells reside in a complex microenvironment presenting them with a multitude of potential cues that are chemical, physical, and mechanical in nature. Conventional techniques used for experiments involving stem cells can only poorly mimic the physiological context, and suffer from imprecise spatial and temporal control, low throughput, lack of scalability and reproducibility, and poor representation of the mechanical and physical cell microenvironment. Novel lab-on-a-chip platforms, on the other hand, can much better mimic the complexity of in vivo tissue milieu and provide a greater control of the parameter variation in a high throughput and scalable manner. This capability may be especially important for understanding the biology and cementing the clinical potential of stem cell based therapies. Here we review microfabrication- and microfluidics-based approaches to investigating the complex biology of stem cell responses to changes in the local microenvironment. In particular, we categorize each method based on the types of controlled inputs it can have on stem cells, including soluble biochemical factors, extracellular matrix interactions, homotypic and heterotypic cell-cell signaling, physical cues (e.g. oxygen tension, pH, temperature), and mechanical forces (e.g. shear, topography, rigidity). Finally, we outline the methods to perform large scale observations of stem cell phenotypes and high-throughput screening of cellular responses to a combination of stimuli, and many new emerging technologies that are becoming available specifically for stem cell applications.

Geometric control of human stem cell morphology and differentiation

During tissue morphogenesis, stem cells and progenitor cells migrate, proliferate, and differentiate, with striking changes in cell shape, size, and acting mechanical stresses. The local cellular function depends on the spatial distribution of cytokines as well as local mechanical microenvironments in which the cells reside. In this study, we controlled the organization of human adipose derived stem cells using micro-patterning technologies, to investigate the influence of multi-cellular form on spatial distribution of cellular function at an early stage of cell differentiation. The underlying role of cytoskeletal tension was probed through drug treatment. Our results show that the cultivation of stem cells on geometric patterns resulted in pattern- and position-specific cell morphology, proliferation and differentiation. The highest cell proliferation occurred in the regions with large, spreading cells (such as the outer edge of a ring and the short edges of rectangles). In contrast, stem cell differentiation co-localized with the regions containing small, elongated cells (such as the inner edge of a ring and the regions next to the short edges of rectangles). The application of drugs that inhibit the formation of actomyosin resulted in the lack of geometrically specific differentiation patterns. This study confirms the role of substrate geometry on stem cell differentiation, through associated physical forces, and provides a simple and controllable system for studying biophysical regulation of cell function.

Regulating microenvironmental stimuli for stem cells and cancer cells using microsystems

Cells express hundreds of different types of receptors, which they use to continuously monitor their chemical and mechanical microenvironments. Stem cells and cancer cells are particularly sensitive to microenvironmental cues because their interactions have profound effects on stem cell potency and tumorigenesis, respectively. Unlike conventional tissue culture in wells and dishes, microtechnology with dimensions on the cellular scale can be combined with materials, chemicals, physiological flows, and other effectors to provide high levels of control in a format more flexible than macroscale in vitro or in vivo systems, revealing stimulation-specific responses of stem cells and cancer cells. Microtechnology-integrated biology enable the simultaneous control of multiple numbers of biological microenvironmental factors in a high-throughput manner. In this review we present representative examples of the use of microtechnology systems to regulate the mechanical, chemical, topological, adhesive, and other environments of individual stem cells and cancer cells. We then explore the possibilities for simultaneous multimodal control of combinations of these environmental factors.

Tailored electroactive and quantitative ligand density microarrays applied to stem cell differentiation

The ability to precisely control the interactions between materials and mammalian cells at the molecular level is crucial to understanding the fundamental chemical nature of how the local environment influences cellular behavior as well as for developing new biomaterials for a range of biotechnological and tissue engineering applications. In this report, we develop and apply for the first time a quantitative electroactive microarray strategy that can present a variety of ligands with precise control over ligand density to study human mesenchymal stem cell (hMSC) differentiation on transparent surfaces with a new method to quantitate adipogenic differentiation. We found that both the ligand composition and ligand density influence the rate of adipogenic differentiation from hMSC's. Furthermore, this new analytical biotechnology method is compatible with other biointerfacial characterization technologies (surface plasmon resonance, mass spectrometry) and can also be applied to investigate a range of protein-ligand or cell-material interactions for a variety of systems biology studies or cell behavior based assays.

Engineering surfaces for site-specific vascular differentiation of mouse embryonic stem cells

Differentiation of stem and progenitor cells routinely relies on the application of soluble growth factors, an approach that enables temporal control of cell fate but enables no spatial control of the differentiation process. Angiogenic progenitor cells derived from mouse embryonic stem cells (ESCs) were differentiated here according to the pattern of immobilized vascular endothelial growth factor-A (VEGF). Mouse ESCs engineered to express green fluorescent protein (eGFP) under control of promoter for the receptor tyrosine kinase Flk1 were used. The Flk1+ angiogenic progenitors were selected from day 3 differentiating embryoid bodies based on their expression of eGFP using fluorescence activated cell sorting. Mouse VEGF(165) was covalently immobilized onto collagen IV (ColIV) using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) chemistry. A non-cell adhesive layer of photocrosslinkable chitosan was first created, after which VEGF-ColIV was stamped as 100mum wide lanes on top of the chitosan layer and the Flk1+ angiogenic progenitors were seeded for site-specific differentiation. Lanes stamped with only ColIV served as controls. The results presented here demonstrate that the cultivation of Flk1+ progenitors on surfaces with immobilized VEGF yielded primarily endothelial cells (53+/-13% CD31 positive and 17+/-2% smooth muscle actin positive), whereas surfaces without VEGF favored vascular smooth muscle-like cell differentiation (26+/-17% CD31 positive and 38+/-9% smooth muscle actin positive).

Adhesion, spreading and osteogenic differentiation of mesenchymal stem cells cultured on micropatterned amorphous diamond, titanium, tantalum and chromium coatings on silicon

It was hypothesized that human mesenchymal stromal cell (hMSC) can be guided by patterned and plain amorphous diamond (AD), titanium (Ti), tantalum (Ta) and chromium (Cr) coatings, produced on silicon wafer using physical vapour deposition and photolithography. At 7.5 h hMSCs density was 3.0-3.5 x higher (P < 0.0003, except Ti) and cells were smaller (68 vs. 102 microm, P 0.000006-0.02) on patterns than on silicon background. HMSC-covered surface of the background silicon was lower on Ti than AD patterns (P = 0.015), but at 5 days this had reversed (P = 0.006). At 7.5 h focal vinculin adhesions and actin cytoskeleton were outgoing from pattern edges so cells assumed geometric square shapes. Patterns allowed induced osteogenesis, but less effectively than plain surfaces, except for AD, which could be used to avoid osseointegration. All these biomaterial patterns exert direct early, intermediate and late guidance on hMSCs and osteogenic differentiation, but indirect interactions exist with cells on silicon background.