Tailored polymer-based nanofibers and nanotubes by means of different infiltration methods into alumina nanopores

Polymerization within Nanoporous Anodized Alumina Oxide Templates (AAO): A Critical Survey

In the last few years, the polymerization of monomers within the nanocavities of porous materials has been thoroughly studied and developed, allowing for the synthesis of polymers with tailored morphologies, chemical architectures and functionalities. This is thus a subject of paramount scientific and technological relevance, which, however, has not previously been analyzed from a general perspective. The present overview reports the state of the art on polymerization reactions in spatial confinement within porous materials, focusing on the use of anodized aluminum oxide (AAO) templates. It includes the description of the AAO templates used as nanoreactors. The polymerization reactions are categorized based on the polymerization mechanism. Amongst others, this includes electrochemical polymerization, free radical polymerization, step polymerization and atom transfer radical polymerization (ATRP). For each polymerization mechanism, a further subdivision is made based on the nature of the monomer used. Other aspects of "in situ" polymerization reactions in restricted AAO geometries include: conversion monitoring, kinetic studies, modeling and polymer characterization. In addition to the description of the polymerization process itself, the use of polymer materials derived from polymerization in AAO templates in nanotechnology applications, is also highlighted. Finally, the review is concluded with a general discussion outlining the challenges that remain in the field.

Ferroelectric Engineered Electrode-Composite Polymer Electrolyte Interfaces for All-Solid-State Sodium Metal Battery

To enhance the compatibility between the polymer-based electrolytes and electrodes, and promote the interfacial ion conduction, a novel approach to engineer the interfaces between all-solid-state composite polymer electrolyte and electrodes using thin layers of ferroelectrics is introduced. The well-designed and ferroelectric-engineered composite polymer electrolyte demonstrates an attractive ionic conductivity of 7.9 × 10^-5 S cm^-1 at room temperature. Furthermore, the ferroelectric engineering is able to effectively suppress the growth of solid electrolyte interphase (SEI) at the interface between polymer electrolytes and Na metal electrodes, and it can also enhance the ion diffusion across the electrolyte-ferroelectric-cathode/anode interfaces. Notably, an extraordinarily high discharge capacity of 160.3 mAh g^-1 , with 97.4% in retention, is achieved in the ferroelectric-engineered all-solid-state Na metal cell after 165 cycles at room temperature. Moreover, outstanding stability is demonstrated that a high discharge capacity retention of 86.0% is achieved over 180 full charge/discharge cycles, even though the cell has been aged for 2 months. This work provides new insights in enhancing the long-cyclability and stability of solid-state rechargeable batteries.

In Situ Synthesis of Poly(butyl methacrylate) in Anodic Aluminum Oxide Nanoreactors by Radical Polymerization: A Comparative Kinetics Analysis by Differential Scanning Calorimetry and 1H-NMR

In this work, we explore the ability to generate well-defined poly(butyl methacrylate) (PBMA) nanostructures by “in situ” polymerization of butyl methacrylate monomer (BMA). PBMA nanostructures of high and low aspect ratios have been successfully obtained through the free radical polymerization (FRP) of a BMA monomer in anodic aluminum oxide (AAO) nanoreactors of suitable size. A polymerization kinetics process has been followed by differential scanning calorimetry (DSC) and proton Nuclear Magnetic Resonance spectroscopy (¹H-NMR).The determination of the kinetics of polymerization through DSC is based on a quick and direct analysis of the exothermic polymerization process, whereas the analysis through ¹H-NMR also allows the unambiguous chemical analysis of the resulting polymer. When compared to bulk polymerization, both techniques demonstrate confinement effects. Moreover, DSC and ¹H-NMR analysis give the same kinetics results and show a gel-effect in all the cases. The number average molecular weight (Mn) of the PBMA obtained in AAO of 60–300 nm are between 30·10³–175·10³ g/mol. Even if the Mn value is lower with respect to that obtained in bulk polymerization, it is high enough to maintain the polymer properties. As determined by SEM morphological characterization, once extracted from the AAO nanoreactor, the polymer nanostructures show controlled homogeneous aspect/size all throughout the length of nanopillar over a surface area of few cm². The Young’s modulus of low aspect ratio PBMA nanopillars determined by AFM gives a value of 3.1 ± 1.1 MPa. In this work, a 100% of PBMA polymer nanostructures are obtained from a BMA monomer in AAO templates through a quick double process: 30 min of monomer immersion at room temperature and 90 min of polymerization reaction at 60 °C. While the same nanostructures are obtained by polymer infiltration of PBMA at 200 °C in about 6 h, polymerization conditions are much softer than those corresponding to the polymer infiltration process. Furthermore, the ¹H-NMR technique has been consolidated as a tool for studying the kinetics of the copolymerization reactions in confinement and the determination of monomer reactivity ratios.

Dynamics studied by Quasielastic Neutron Scattering (QENS)

Quasielastic neutron scattering (QENS) allows measurement of the molecular displacements in time and space, from pico- to tens of nanoseconds and from Ångstroms to nanometers, respectively. The method probes dynamics from fast vibrational modes down to slow diffusive motion. Every scattering experiment leads to a dynamic structure factor $$S\left( {\vec Q,\omega } \right)$$ S Q → , ω or its spatial and temporal Fourier transform (van Hove correlation function $$G\left( {\vec r,t} \right)$$ G r → , t ). This shows exactly where the atoms are and how they move. In this manuscript the basics of the QENS method are presented and a few examples highlighting the potentials of QENS are given: (i) diffusion of liquids and gases in nano- and mesoporous materials; (ii) hydrogen dynamics in a high temperature polymer electrolyte fuel cell (HT-PEFC) and (iii) influence of the surface interactions on polymer dynamics in nanopores.

Superhydrophobic surfaces and coatings by electrochemical anodic oxidation and plasma electrolytic oxidation

The review provides a comprehensive account of superhydrophobic surfaces fabricated by electrochemical anodic oxidation (anodization). First, reported works on superhydrophobic polymers and metals made by using anodized metal oxide porous templates as moulds are presented (section 2). The next section provides a detailed description of the different fabrication approaches of superhydrophobic surfaces on anodized metallic substrates (section 3.1). The published information on superhydrophobic anodized surfaces in various applications, viz. anti-corrosion, anti-icing, oil separation, and biomedical are systematically covered (section 3.2). Superhydrophobic surfaces fabricated by plasma electrolytic oxidation are also presented (section 4). Future research perspectives debated. The collective information provided is helpful to further advance R & D in making pioneering superhydrophobic anodized nanoporous surfaces.

Robust Fabrication of Polymeric Nanowire with Anodic Aluminum Oxide Templates

Functionalization of a surface with biomimetic nano-/micro-scale roughness (wires) has attracted significant interests in surface science and engineering as well as has inspired many real-world applications including anti-fouling and superhydrophobic surfaces. Although methods relying on lithography include soft-lithography greatly increase our abilities in structuring hard surfaces with engineered nano-/micro-topologies mimicking real-world counterparts, such as lotus leaves, rose petals, and gecko toe pads, scalable tools enabling us to pattern polymeric substrates with the same structures are largely absent in literature. Here we present a robust and simple technique combining anodic aluminum oxide (AAO) templating and vacuum-assisted molding to fabricate nanowires over polymeric substrates. We have demonstrated the efficacy and robustness of the technique by successfully fabricating nanowires with large aspect ratios (>25) using several common soft materials including both cross-linking polymers and thermal plastics. Furthermore, a model is also developed to determine the length and molding time based on nanowires material properties (e.g., viscosity and interfacial tension) and operational parameters (e.g., pressure, vacuum, and AAO template dimension). Applying the technique, we have further demonstrated the confinement effects on polymeric crosslinking processes and shown substantial lengthening of the curing time.

Polymer dynamics under confinement

We review recent neutron scattering work and related results from simulation and complementary techniques focusing on the microscopic dynamics of polymers under confinement. Confinement is either realized in model porous materials or in polymer nanocomposites (PNC). The dynamics of such confined polymers is affected on the local segmental level, the level of entanglements as well as on global levels: (i) at the segmental level the interaction with the surface is of key importance. At locally repulsive surfaces compared to the bulk the segmental dynamics is not altered. Attractive surfaces slow down the segmental dynamics in their neighborhood but do not give rise to dead, glassy layers. (ii) Confinement generally has little effect on the inter-chain entanglements: both for weakly as well as for marginally confined polymers the reptation tube size is not changed. Only for strongly confined polymers disentanglement takes place. Similarly, in PNC at higher NP loading disentanglement phenomena are observed; in addition, at very high loading a transition from polymer caused topological constraints to purely geometrical constraints is observed. (iii) On the more global scale NSE experiments revealed important information on the nature of the interphase between adsorbed layer and bulk polymer. (iv) Polymer grafts at NP mutually confine each other, an effect that is most pronounced for one component NP. (v) Global diffusion of entangled polymers both in weakly and strongly attractive PNC is governed by the ratio of bottle-neck to chain size that characterizes the 'entropic barrier' for global diffusion.

Critical Contact Angle to Induce Capillary Rise of Polymers in Nanopores Does Not Depend on Chain Length

We study the effect of physical confinement on the capillary infiltration of polymers into cylindrical nanopores using molecular dynamics simulations. In particular, we probe whether the critical contact angle (θ_c) above which capillary rise infiltration ceases to occur changes for long-chain polymers, possibly due to loss of conformation entropy induced by chain confinement. Surprisingly, θ_c does not strongly depend on the length of polymer chains and stays constant for large N. A free energy model is developed to show that θ_c depends strongly on the size of statistical segments rather than N, which we confirm by performing MD simulations of infiltration with semiflexible polymers. These results could provide guidelines in manufacturing polymer nanostructures and nanocomposites using capillary rise infiltration.

Gecko-like Branched Polymeric Nanostructures from Nanoporous Templates

Here, we report a simple method to produce hierarchically shaped polymeric one-dimensional nanostructures. More specifically, dual-sized polymer nanowires are fabricated employing multibranched anodic aluminum oxide templates. By fine selection of the anodization conditions, we achieve branched nanopores having a first segment of 400 nm in diameter from which seven further 55 nm in diameter pores arise. Wetting of such nanopores with polymer melts-for example, poly(ε-caprolactone) and polystyrene-allows for the nanomolding of their respective inverse nanostructures, that is, dual-sized multibranched polymer nanowires that, when supported on a flat surface, strongly resemble the spatulae of geckos' toes. The structural features of the dual-sized polymer nanostructures, namely, crystalline phase, crystallinity, texture, and so on, are furthermore characterized and interpreted within the context of polymer phase transitions in confined media. Our work presents a readily applicable approach to produce soft nanomaterials of high morphological complexity, thereby with promising implications in the nanotechnology area, for example, in biomimetic solid adhesion.

Vertically Aligned and Continuous Nanoscale Ceramic-Polymer Interfaces in Composite Solid Polymer Electrolytes for Enhanced Ionic Conductivity

Among all solid electrolytes, composite solid polymer electrolytes, comprised of polymer matrix and ceramic fillers, garner great interest due to the enhancement of ionic conductivity and mechanical properties derived from ceramic-polymer interactions. Here, we report a composite electrolyte with densely packed, vertically aligned, and continuous nanoscale ceramic-polymer interfaces, using surface-modified anodized aluminum oxide as the ceramic scaffold and poly(ethylene oxide) as the polymer matrix. The fast Li⁺ transport along the ceramic-polymer interfaces was proven experimentally for the first time, and an interfacial ionic conductivity higher than 10^-3 S/cm at 0 °C was predicted. The presented composite solid electrolyte achieved an ionic conductivity as high as 5.82 × 10^-4 S/cm at the electrode level. The vertically aligned interfacial structure in the composite electrolytes enables the viable application of the composite solid electrolyte with superior ionic conductivity and high hardness, allowing Li-Li cells to be cycled at a small polarization without Li dendrite penetration.

Preparation of ordered mesoporous and macroporous thermoplastic polyurethane surfaces for potential medical applications

Thermoplastic polyurethanes are widely used in medical devices. In order to limit some of their shortfalls, like microbial attachment, surfaces modifications can be required. In this work, a two-step replication method was used to create ordered macroporous and mesoporous thermoplastic polyurethane surfaces using anodic aluminum oxide as master template. The intermediate mould materials that were tested were polystyrene and a polyacrylate resin with inorganic filler. All obtained surfaces were characterized by scanning electron microscopy. The initial anodic aluminum oxide surfaces possessed macro or mesopores, function of anodization conditions. The intermediate mould structure correctly replicated the pattern, but the polystyrene surface structures (pillars) were less resistant than the polyacrylate resin ones. The thermoplastic polyurethane pattern possessed macropores or mesopores of about 130 nm or 46 nm diameter and of about 300 nm or 99 nm interpore distances, respectively, in accordance with the initial pattern. Thermoplastic polyurethanes pore depth was however less than initial anodic aluminum oxide pore depth, linked to an incomplete replication during intermediate mould preparation (60 to 90% depth replication). The correct replication of the original pattern confirms that this novel fabrication method is a promising route for surface patterning of thermoplastic polyurethanes that could be used for medical applications.

Thermo-responsive PNIPAm nanopillars displaying amplified responsiveness through the incorporation of nanoparticles

The possibility of combining more than one stimulus-responsive property into a single material holds interesting potential for the creation of adaptive devices to be used in diverse fields such as drug delivery, nanomedicine and tissue engineering. This paper describes a novel material based on thermo-responsive PNIPAm nanopillars with amplified surface properties through the incorporation of Fe₃O₄ nanoparticles. The incorporation of magnetic nanoparticles into the nanopillars, prepared via surface-initiated atom-transfer radical polymerization in anodized aluminum oxide templates, sharply increased their stiffness and hydrophobicity when increasing the temperature above the volume phase transition temperature. Furthermore, their magnetic response turned out to be proportional to the amount of the incorporated nanoparticles. The possibility of sharply increasing the stiffness with a temperature variation close to the human body temperature paves the way to the application of these substrates as "smart" scaffolds for cell culture. Additionally, the presence of superparamagnetic nanoparticles in the nanopillars offers the possibility of using these nanostructured systems for magnetic hyperthermia.

Measuring the Pull-Off Force of an Individual Fiber Using a Novel Picoindenter/Scanning Electron Microscope Technique

We employed a novel picoindenter (PI)/scanning electron microscopy (SEM) technique to measure the pull-off force of an individual electrospun poly(vinylidene fluoride) (PVDF) fibers. Individual fibers were deposited over a channel in a custom-designed silicon substrate, which was then attached to a picoindenter. The picoindenter was then positioned firmly on the sample stage of the SEM. The picoindenter tip laterally pushed individual fibers to measure the force required to detach it from the surface of substrate. SEM was used to visualize and document the process. The measured pull-off force ranged between 5.8 ± 0.2 μN to ~17.8 ± 0.2 μN for individual fibers with average diameter ranging from 0.8 to 2.3 μm. Thus, this study, a first of its kind, demonstrates the use of a picoindenter to measure the pull-off force of a single micro/nanofiber.

The effect of subpressure on the bond strength of resin to zirconia ceramic

Objective

This study was conducted to investigate the effect of subpressure on the bond strength of resin to zirconia ceramic. The subpressure would create a pressure gradient which could clean out the bubbles in the adhesives or bonding interface.

Methods

Twenty-eight pre-sintered zirconia discs were fabricated. Half of them were polished (group P, n = 14), and the rest were sandblasted (group S, n = 14). After sintered,the surface roughness of the zirconia discs was measured. Then, they were randomly divided into two subgroups (n = 7). The groups were named as follows: PC: P + no additional treatments; PP: P + 0.04 MPa after application of adhesives; SC: S + no additional treatments; and SP: S + 0.04 MPa after application of adhesives. Resin columns were bonded to the zirconia specimens to determine shear bond strength (SBS). The bonding interfaces were observed and the fracture modes were evaluated. Statistical analysis was performed on all data.

Results

The surface roughness of group S was significantly higher than that of group P (P<0.05). The SBS values were PC = 13.48 ± 0.7 MPa, PP = 15.22 ± 0.8 MPa, SC = 17.23 ± 0.7 MPa and SP = 21.68 ± 1.4 MPa. There were significant differences among the groups (P<0.05). Scanning electron microscopy (SEM) results showed that the adhesives of group SP and PP were closer and denser to the zirconia ceramic than that of group PC and SC. The proportion of the mixed fracture mode significantly increased after adding subpressure (P< 0.05).

Conclusion

Subpressure can improve the shear bond strength of resin to zirconia ceramics and increase micro-infiltration between the adhesives and the zirconia ceramics, especially on the rough surfaces.

Facile design of ultra-thin anodic aluminum oxide membranes for the fabrication of plasmonic nanoarrays

Ultra-thin anodic aluminum oxide (AAO) membranes are efficient templates for the fabrication of patterned nanostructures. Herein, a three-step etching method to control the morphology of AAO is described. The morphological evolution of the AAO during phosphoric acid etching is systematically investigated and a nonlinear growth mechanism during unsteady-state anodization is revealed. The thickness of the AAO can be quantitatively controlled from ∼100 nm to several micrometers while maintaining the tunablity of the pore diameter. The AAO membranes are robust and readily transferable to different types of substrates to prepare patterned plasmonic nanoarrays such as nanoislands, nanoclusters, ultra-small nanodots, and core-satellite superstructures. The localized surface plasmon resonance from these nanostructures can be easily tuned by adjusting the morphology of the AAO template. The custom AAO template provides a platform for the fabrication of low-cost and large-scale functional nanoarrays suitable for fundamental studies as well as applications including biochemical sensing, imaging, photocatalysis, and photovoltaics.

Nanopatterned polystyrene-b-poly(acrylic acid) surfaces to modulate cell-material interaction

In this work we explore the effect of surface nanoarchitecture of polystyrene (PS) and polystyrene-b-poly(acrylic acid) (PS-b-PAA) diblock copolymer films on cell viability. PS and PS-b-PAA have been nanopatterned at temperatures of 110, 120 and 140°C using nanoporous aluminium oxide membranes (AAO) as a template. Surface architecture strongly depends on the infiltration temperature and the nature of the infiltrated polymer. High patterning temperatures yield hollow fibre shape architecture at the nanoscale level, which substantially modifies the surface hydrophobicity of the resulting materials. Up to date very scarce reports could be found in the literature dealing with the interaction of microstructured/nanostructured polymeric surfaces with cancer cells. Therefore, MCF-7 breast cancer cells have been selected as a model to conduct cell viability assays. The findings reveal that the fine-tuning of the surface nanoarchitecture contributes to the modification of its biocompatibility. Overall, this study highlights the potential of AAO membranes to obtain well-defined tailored morphologies at nanoscale level and its importance to develop novel soft functional surfaces to be used in the biomedical field.

Interfacial Interaction in Anodic Aluminum Oxide Templates Modifies Morphology, Surface Area, and Crystallization of Polyamide-6 Nanofibers

Here, we demonstrated that, when the precipitation process of polyamide-6 (PA6) solution happens in cylindrical channels of an anodized aluminum oxide membrane (AAO), interface interactions between a solid surface, solvent, non-solvent, and PA6 will influence the obtained polymer nanostructures, resulting in complex morphologies, increased surface area, and crystallization changes. With the enhancing interaction of PA6 and the AAO surface, the morphology of PA6 nanostructures changes from solid nanofibers, mesoporous, to bamboo-like, while at the same time, metastable γ-phase domains increase in these PA6 nanostructures. Brunauer-Emmett-Teller (BET) surface areas of solid, bamboo-like, and mesoporous PA6 nanofibers rise from 16, 20.9, to 25 m(2)/g. This study shows that interfacial interaction in AAO template fabrication can be used in manipulating the morphology and crystallization of one-dimensional polymer nanostructures. It also provides us a simple and novel method to create porous PA6 nanofibers with a large surface area.

Fabrication of Acrylonitrile-Butadiene-Styrene Nanostructures with Anodic Alumina Oxide Templates, Characterization and Biofilm Development Test for Staphylococcus epidermidis

Medical devices can be contaminated by microbial biofilm which causes nosocomial infections. One of the strategies for the prevention of such microbial adhesion is to modify the biomaterials by creating micro or nanofeatures on their surface. This study aimed (1) to nanostructure acrylonitrile-butadiene-styrene (ABS), a polymer composing connectors in perfusion devices, using Anodic Alumina Oxide templates, and to control the reproducibility of this process; (2) to characterize the physico-chemical properties of the nanostructured surfaces such as wettability using captive-bubble contact angle measurement technique; (3) to test the impact of nanostructures on Staphylococcus epidermidis biofilm development. Fabrication of Anodic Alumina Oxide molds was realized by double anodization in oxalic acid. This process was reproducible. The obtained molds present hexagonally arranged 50 nm diameter pores, with a 100 nm interpore distance and a length of 100 nm. Acrylonitrile-butadiene-styrene nanostructures were successfully prepared using a polymer solution and two melt wetting methods. For all methods, the nanopicots were obtained but inside each sample their length was different. One method was selected essentially for industrial purposes and for better reproducibility results. The flat ABS surface presents a slightly hydrophilic character, which remains roughly unchanged after nanostructuration, the increasing apparent wettability observed in that case being explained by roughness effects. Also, the nanostructuration of the polymer surface does not induce any significant effect on Staphylococcus epidermidis adhesion.

Tautomerizable β-ketonitrile copolymers for bone tissue engineering: Studies of biocompatibility and cytotoxicity

β-Ketonitrile tautomeric copolymers have demonstrated tunable hydrophilicity/hydrophobicity properties according to surrounding environment, and mechanical properties similar to those of human bone tissue. Both characteristic properties make them promising candidates as biomaterials for bone tissue engineering. Based on this knowledge we have designed two scaffolds based on β-ketonitrile tautomeric copolymers which differ in chemical composition and surface morphology. Two of them were nanostructured, using an anodized aluminum oxide (AAO) template, and the other two obtained by solvent casting methodology. They were used to evaluate the effect of the composition and their structural modifications on the biocompatibility, cytotoxicity and degradation properties. Our results showed that the nanostructured scaffolds exhibited higher degradation rate by macrophages than casted scaffolds (6 and 2.5% of degradation for nanostructured and casted scaffolds, respectively), a degradation rate compatible with bone regeneration times. We also demonstrated that the β-ketonitrile tautomeric based scaffolds supported osteoblastic cell proliferation and differentiation without cytotoxic effects, suggesting that these biomaterials could be useful in the bone tissue engineering field.

Polymerization kinetics of a fluorinated monomer under confinement in AAO nanocavities

The study of the polymerization kinetics of a fluorinated acrylic monomer under confinement into AAO nanocavities.

Anemone-like nanostructures for non-lithographic, reproducible, large-area, and ultra-sensitive SERS substrates

The melt-infiltration technique enables the fabrication of complex nanostructures for a wide range of applications in optics, electronics, biomaterials, and catalysis. Here, anemone-like nanostructures are produced for the first time under the surface/interface principles of melt-infiltration as a non-lithographic method. Functionalized anodized aluminum oxide (AAO) membranes are used as templates to provide large-area production of nanostructures, and polycarbonate (PC) films are used as active phase materials. In order to understand formation dynamics of anemone-like structures finite element method (FEM) simulations are performed and it is found that wetting behaviour of the polymer is responsible for the formation of cavities at the caps of the structures. These nanostructures are examined in the surface-enhanced-Raman-spectroscopy (SERS) experiment and they exhibit great potential in this field. Reproducible SERS signals are detected with relative standard deviations (RSDs) of 7.2-12.6% for about 10,000 individual spots. SERS measurements are demonstrated at low concentrations of Rhodamine 6G (R6G), even at the picomolar level, with an enhancement factor of ∼10(11). This high enhancement factor is ascribed to the significant electric field enhancement at the cavities of nanostructures and nanogaps between them, which is supported by finite difference time-domain (FDTD) simulations. These novel nanostructured films can be further optimized to be used in chemical and plasmonic sensors and as a single molecule SERS detection platform.

Spontaneous high piezoelectricity in poly(vinylidene fluoride) nanoribbons produced by iterative thermal size reduction technique

We produced kilometer-long, endlessly parallel, spontaneously piezoelectric and thermally stable poly(vinylidene fluoride) (PVDF) micro- and nanoribbons using iterative size reduction technique based on thermal fiber drawing. Because of high stress and temperature used in thermal drawing process, we obtained spontaneously polar γ phase PVDF micro- and nanoribbons without electrical poling process. On the basis of X-ray diffraction (XRD) analysis, we observed that PVDF micro- and nanoribbons are thermally stable and conserve the polar γ phase even after being exposed to heat treatment above the melting point of PVDF. Phase transition mechanism is investigated and explained using ab initio calculations. We measured an average effective piezoelectric constant as -58.5 pm/V from a single PVDF nanoribbon using a piezo evaluation system along with an atomic force microscope. PVDF nanoribbons are promising structures for constructing devices such as highly efficient energy generators, large area pressure sensors, artificial muscle and skin, due to the unique geometry and extended lengths, high polar phase content, high thermal stability and high piezoelectric coefficient. We demonstrated two proof of principle devices for energy harvesting and sensing applications with a 60 V open circuit peak voltage and 10 μA peak short-circuit current output.

Poly(3-hexylthiophene) nanotubes with tunable aspect ratios and charge transport properties

Regioregular poly(3-hexylthiophene) (RR-P3HT) nanotubes (200 nm in diameter) with tunable aspect ratios from 25 to 300 were prepared using a polymer melt wetting technique. Aspect-ratio tunability was achieved by controlling the wetting behavior of RR-P3HT melts in a template. The crystallinity and chain orientation of RR-P3HT were studied by grazing incidence X-ray diffraction, wide-angle X-ray diffraction, and polarized photoluminescence spectroscopy. Results suggest that RR-P3HT chains in the lamellar structure prefer to be perpendicular to the axis of the RR-P3HT nanotubes, forming a face-on conformation in the RR-P3HT nanotubes that leads to increased carrier mobility of RR-P3HT. Field-effect transistors were fabricated based on a single RR-P3HT nanotube and showed a carrier mobility of 0.14 ± 0.02 cm(2)/V·s.

Superhydrophobic stability of nanotube array surfaces under impact and static forces

The surfaces of nanotube arrays were coated with poly(methyl methacrylate) (PMMA) using an imprinting method with an anodized alumina membrane as the template. The prepared nanotube array surfaces then either remained untreated or were coated with NH2(CH2)3Si(OCH3)3(PDNS) or CF3(CF2)7CH2CH2Si(OC2H5)3 (PFO). Thus, nanotube arrays with three different surfaces, PDNS, PMMA (without coating), and PFO, were obtained. All three surfaces (PDNS, PMMA, and PFO) exhibited superhydrophobic properties with contact angles (CA) of 155, 166, and 168°, respectively, and their intrinsic water contact angles were 30, 79, and 118°, respectively. The superhydrophobic stabilities of these three surfaces were examined under dynamic impact and static pressures in terms of the transition from the Cassie-Baxter mode to the Wenzel mode. This transition was determined by the maximum pressure (p(max)), which is dependent on the intrinsic contact angle and the nanotube density of the surface. A p(max) greater than 10 kPa, which is sufficiently large to maintain stable superhydrophobicity under extreme weather conditions, such as in heavy rain, was expected from the PFO surface. Interestingly, the PDNS surface, with an intrinsic CA of only 30°, also displayed superhydrophobicity, with a CA of 155°. This property was partially maintained under the dynamic impact and static pressure tests. However, under an extremely high pressure (0.5 MPa), all three surfaces transitioned from the Cassie-Baxter mode to the Wenzel mode. Furthermore, the lost superhydrophobicity could not be recovered by simply relieving the pressure. This result indicates that the best way to maintain superhydrophobicity is to increase the p(max) of the surface to a value higher than the applied external pressure by using low surface energy materials and having high-density binary nano-/microstructures on the surface.

Nanopatterned PMMA-Yb:Er/Tm:Lu2O3 composites with visible upconversion emissions

Nanopillars, nanotubes and nanofibers of transparent polymethyl methacrylate (PMMA) polymer with Yb:Ln:Lu2O3 (Ln = Er or Tm) nanoparticles (NPs) (≈30-35 nm average size) have been prepared by infiltration of anodized aluminum oxide hexagonally nanopatterned templates. The outer diameter of these nanostructures is in the 330-400 nm range, with lengths up to 50 μm and a period distance of 430 nm. These nanostructures show visible upconversion (UC) emissions under excitation with 978 nm light. The steady state temperature of the polymer nanostructures is optically evidenced by the Er(3+) UC emission and optically controlled around the PMMA glass transition temperature by the excitation light, introducing a new method for NP storage in a solid and potential optically induced particle release. Full color emission is shown in tridoped (Yb:Er:Tm) samples.

Poly(3-hexylthiophene) nanowires in porous alumina: internal structure under confinement

We study the structure of poly(3-hexylthiophene) (P3HT) subjected to nanoscale confinement in two dimensions (2D) as imposed by the rigid walls of nanopore anodic aluminum oxide (AAO) templates. P3HT nanowires with aspect ratios (length-to-diameter) above 1000 and diameters ranging between 15 nm and 350 nm are produced in the pores of the AAO templates via two processing routes. These are, namely, drying a solution or cooling from the melt. Our study focuses on the effects of nanoconfinement on the semicrystalline nature of the nanowires, the orientation of crystals, and the evolution of the structures that P3HT might develop under confinement, which we investigate by combining imaging (SEM), spectroscopic (FTIR, photoluminescence) and structural characterization (WAXS, DSC) techniques. Solution-processed P3HT nanowires are essentially amorphous and porous, whereas melt-processed nanowires are semicrystalline, and present a more compact morphology and smoother surfaces. In the latter case, the orientation of crystals was found to strongly depend on the pore diameter. In large diameter nanowires (250 nm and 120 nm), crystals are oriented laying the π-π stacking direction parallel to the nanowire axis. In contrast, in small diameter nanowires, the π-π stacking direction is mainly perpendicular to the nanowires, as crystals are likely to nucleate at pore walls. The structural evolution of P3HT upon heating into weakly (250 nm in diameter) and strongly (15 nm in diameter) confining pores has been studied. A complex set of structures is observed, i.e., crystals, a solid layered mesophase, a nematic/smectic mesophase, and the isotropic melt. Interestingly, a rare crystal polymorph (form II) is also observed under strong confinement conditions together with the usual lamellar crystal form I. Furthermore, we show that nanoconfinement stabilizes form II: such crystals are still present at 210 °C while in the bulk they get converted to form I crystals at around 50 °C.

Templated growth of PFO-DBT nanorod bundles by spin coating: effect of spin coating rate on the morphological, structural, and optical properties

In this study, the spin coating of template-assisted method is used to synthesize poly[2,7-(9,9-dioctylfluorene)-alt-4,7-bis(thiophen-2-yl)benzo-2,1,3-thiadiazole] (PFO-DBT) nanorod bundles. The morphological, structural, and optical properties of PFO-DBT nanorod bundles are enhanced by varying the spin coating rate (100, 500, and 1,000 rpm) of the common spin coater. The denser morphological distributions of PFO-DBT nanorod bundles are favorably yielded at the low spin coating rate of 100 rpm, while at high spin coating rate, it is shown otherwise. The auspicious morphologies of highly dense PFO-DBT nanorod bundles are supported by the augmented absorption and photoluminescence.

Instabilities of Teflon AF thin films in alumina nanochannels and adhesion of bi-level Teflon AF nanopillars

In this paper, a novel replica-molding technique for fabrication of bi-level Teflon AF nanopillars, as an electrostatic-based dry adhesive, is reported. The technique reported herein relies on the concurrent heating and cooling of the Teflon AF melt which filled vertically aligned alumina nanochannels as the mold. Unlike conventional polymer infiltration methods which consist of filling the mold by only heating the polymer above its glass transition temperature, in the current method, the polymer melt was also simultaneously cooled down during the infiltration process. Concurrent cooling of the Teflon AF melt allowed control over the interfacial instabilities of the polymer thin film, which formed ahead of the polymer melt upon its infiltration into the alumina nanochannels. By doing so, the geometrical properties of the peculiar fluffy nanostructure which was subsequently developed-after removal of the mold-on top of the extremely high aspect-ratio Teflon AF nanopillars (200 nm in diameter, ~25 μm tall) were modified. The height of the base nanopillars was measured and the structural properties (i.e., surface area fraction and roughness) of the fluffy nanostructure terminating the base nanopillars at the tip were quantified. Next, the effects of the topographical properties of the bi-level Teflon AF nanopillars on their adhesion, in both the normal and shear directions, were investigated. Tribological results were discussed in detail to clarify the contribution of the structural properties of the fabricated dry adhesive toward its remarkable adhesion and friction forces generated via contact electrification. It is worthwhile to mention that bi-level Teflon AF nanopillars with these specific structural properties have generated enhanced adhesion and friction strengths, up to ~2.1 and 13 N cm(-2), respectively.

Melt infiltration: an emerging technique for the preparation of novel functional nanostructured materials

The rapidly expanding toolbox for design and preparation is a major driving force for the advances in nanomaterials science and technology. Melt infiltration originates from the field of ceramic nanomaterials and is based on the infiltration of porous matrices with the melt of an active phase or precursor. In recent years, it has become a technique for the preparation of advanced materials: nanocomposites, pore-confined nanoparticles, ordered mesoporous and nanostructured materials. Although certain restrictions apply, mostly related to the melting behavior of the infiltrate and its interaction with the matrix, this review illustrates that it is applicable to a wide range of materials, including metals, polymers, ceramics, and metal hydrides and oxides. Melt infiltration provides an alternative to classical gas-phase and solution-based preparation methods, facilitating in several cases extended control over the nanostructure of the materials. This review starts with a concise discussion on the physical and chemical principles for melt infiltration, and the practical aspects. In the second part of this contribution, specific examples are discussed of nanostructured functional materials with applications in energy storage and conversion, catalysis, and as optical and structural materials and emerging materials with interesting new physical and chemical properties. Melt infiltration is a useful preparation route for material scientists from different fields, and we hope this review may inspire the search and discovery of novel nanostructured materials.

Porous polymer nanostructures fabricated by the surface-induced phase separation of polymer solutions in anodic aluminum oxide templates

We study the formation of porous polymer nanostructures fabricated by the surface-induced phase separation of polymer solutions in anodic aluminum oxide (AAO) templates. Poly(methyl methacrylate) (PMMA) and tetrahydrofuran (THF) are used to investigate the evolution process of the surface-induced phase separation. With the longer immersion time of the AAO template in the polymer solution, the size of the solvent-rich droplet is increased by the coarsening process, resulting in the formation of porous polymer nanostructures. The coarsening mechanism is further evaluated by changing the experimental parameters including the immersion time, the polymer concentration, the polymer molecular weight, and the solvent quality. Under conditions in which polymer solutions have higher viscosities, the coarsening process is slowed down and the formation of the porous nanostructures is prohibited. The prevention of the porous nanostructures can also be realized by adding water to the PMMA/THF solution before the immersion process.