Imaging macromolecular interactions at an interface

Preserving the Integrity of Surfactant-Stabilized Microbubble Membranes for Localized Oxygen Delivery

Ultrasound contrast agents consist of stabilized microbubbles. We are developing a surfactant-stabilized microbubble platform with a shell composed of Span 60 (Sorbitan monostearate) and an emulsifying agent, water-soluble vitamin E (α-tocopheryl poly(ethylene glycol) succinate, abbreviated as TPGS), named SE61. The microbubbles act both as an imaging agent and a vehicle for delivering oxygen to hypoxic areas in tumors. For clinical use, it is important that a platform be stable under storage at room temperature. To accomplish this, a majority of biologicals are prepared as freeze-dried powders, which also eliminates the necessity of a cold chain. The interfaces among the surfactants, gas, and liquids are subject to disruption in both the freezing and drying phases. Using thermocouples to monitor temperature profiles, differential scanning calorimetry to determine the phase transitions, and acoustic properties to gauge the degree of microbubble disruption, the effects of the freezing rate and the addition of different concentrations of lyoprotectants were determined. Slower cooling rates achieved by freezing the samples in a -20 °C bath were found to be reproducible and produce contrast agents with acceptable acoustical properties. The ionic strength of the solutions and the concentration of the lyoprotectant determined the glass-transition temperature (Tg') of the frozen sample, which determines at what temperature samples can be dried without collapse. Crucially, we found that the shelf stability of surfactant-shelled oxygen microbubbles can be enhanced by increasing the lyoprotectant (glucose) concentration from 1.8 to 5.0% (w/v), which prevents the melt temperature (Tm) of the TPGS phase from rising above room temperature. The increase in glucose concentration results in a lowering of Tm of the emulsifying agent, preventing a phase change in the liquid-crystalline phase and allowing for more stable bubbles. We believe that preventing this phase change is necessary to producing stabilized freeze-dried microbubbles.

Multilayers formed by polyelectrolyte-surfactant and related mixtures at the air-water interface

The structure and occurrence of multilayered adsorption at the air-water interface of surfactants in combination with other oppositely charged species is reviewed. The main species that trigger multilayer formation are multiply charged metal, oligo- and polyions. The structures vary from the attachment of one or two more or less complete surfactant bilayers to the initial surfactant monolayer at the air-water interface to the attachment of a greater number of bilayers with a more defective structure. The majority of the wide range of observations of such structures have been made using neutron reflectometry. The possible mechanisms for the attraction of surfactant bilayers to an air-water interface are discussed and particular attention is given to the question of whether these structures are true equilibrium structures.

Applicability of the Gibbs Adsorption Isotherm to the analysis of experimental surface-tension data for ionic and nonionic surfactants

The Gibbs Adsorption Isotherm equation is a two-dimensional analogous of the Gibbs-Duhem equation, and it is one of the cornerstones of interface science. It is also widely used to estimate the surface excess concentration (SEC) for surfactants and other compounds in aqueous solution, from surface tension measurements. However, in recent publications some authors have cast doubt on this method. In the present work, we review some of the best available surface tension experimental data, and compare estimations of the SEC, using the Gibbs isotherm method (GIM), to direct measurements reported in the literature. This is done for both nonionic and ionic surfactants, with and without added salt. Our review leads to the conclusion that the GIM has a very solid agreement with experiments, and that it does estimate accurately the SEC for surfactant concentrations smaller than the critical micellar concentration (CMC).

Recovering fluorophore concentration profiles from confocal images near lateral refractive index step changes

Optical aberrations due to refractive index mismatches occur in various types of microscopy due to refractive differences between the sample and the immersion fluid or within the sample. We study the effects of lateral refractive index differences by fluorescence confocal laser scanning microscopy due to glass or polydimethylsiloxane cuboids and glass cylinders immersed in aqueous fluorescent solution, thereby mimicking realistic imaging situations in the proximity of these materials. The reduction in fluorescence intensity near the embedded objects was found to depend on the geometry and the refractive index difference between the object and the surrounding solution. The observed fluorescence intensity gradients do not reflect the fluorophore concentration in the solution. It is suggested to apply a Gaussian fit or smoothing to the observed fluorescence intensity gradient and use this as a basis to recover the fluorophore concentration in the proximity of the refractive index step change. The method requires that the reference and sample objects have the same geometry and refractive index. The best results were obtained when the sample objects were also used for reference since small differences such as uneven surfaces will result in a different extent of aberration.

Visualizing monolayers with a water-soluble fluorophore to quantify adsorption, desorption, and the double layer

Contrast in confocal microscopy of phase-separated monolayers at the air-water interface can be generated by the selective adsorption of water-soluble fluorescent dyes to disordered monolayer phases. Optical sectioning minimizes the fluorescence signal from the subphase, whereas convolution of the measured point spread function with a simple box model of the interface provides quantitative assessment of the excess dye concentration associated with the monolayer. Coexisting liquid-expanded, liquid-condensed, and gas phases could be visualized due to differential dye adsorption in the liquid-expanded and gas phases. Dye preferentially adsorbed to the liquid-disordered phase during immiscible liquid-liquid phase coexistence, and the contrast persisted through the critical point as shown by characteristic circle-to-stripe shape transitions. The measured dye concentration in the disordered phase depended on the phase composition and surface pressure, and the dye was expelled from the film at the end of coexistence. The excess concentration of a cationic dye within the double layer adjacent to an anionic phospholipid monolayer was quantified as a function of subphase ionic strength, and the changes in measured excess agreed with those predicted by the mean-field Gouy-Chapman equations. This provided a rapid and noninvasive optical method of measuring the fractional dissociation of lipid headgroups and the monolayer surface potential.

Pefluorocarbon inhibition of bubble induced Ca2+ transients in an in vitro model of vascular gas embolism

Endothelial injury resulting from deleterious interaction of gas microbubbles occurs in many surgical procedures and other medical interventions. The symptoms of vascular air embolism (VAE), while serious, are often difficult to detect, and there are essentially no pharmaceutical preventative or post-event treatments currently available. Perfluorocarbons (PFCs), however, have shown particular promise as a therapeutic option in reducing endothelial injury both in- and ex-vivo. Recently, we demonstrated the effectiveness of Oxycyte, a third-generation PFC formulated in a phosphotidylcholine emulsion, using an in vitro model of VAE developed in our laboratory. This apparatus allows live cell imaging concurrent with precise manipulation of physiologically sized microbubbles so that they may be brought into individual contact with human umbilical vein endothelial cells dye-loaded with the Ca(2+) sensitive Fluo-4. Herein, we expand use of this fluorescence microscopy-based cell culture model. Specifically, we examined the concentration dependence of Oxycyte in reducing both the amplitude and frequency of large intracellular Ca(2+) currents that are both a hallmark of bubble contact and a quantifiable indication that abnormal intracellular signaling has been triggered. We measured dose dependence curves and fit the resultant data using a modified Black and Leff operational model of agonism. The half maximal inhibitory concentrations of Oxycyte for (i) inhibition of occurrence and (ii) amplitude reduction were 229 ± 49 µM and 226 ± 167 µM, respectively. This investigation shows the preferential gas/liquid interface occupancy of the PFC component of Oxycyte over that of mechanosensing glycocalyx components and validates Oxycyte's specific surfactant mechanism of action. Further, no lethality was observed for any concentration of this bioinert PFC, as it acts as a competitive allosteric inhibitor of syndecan activation to ameliorate cell response to bubble contact.

Surfactant reduction of cerebral infarct size and behavioral deficit in a rat model of cerebrovascular arterial gas embolism

Gas embolism occurs commonly in cardiac and vascular surgery and decompression sickness. The goals of this study were to develop a new in vivo rat model of cerebrovascular arterial gas embolism and to determine the effects of exogenous surfactants on resultant brain infarct volume and accompanying long-term neurological dysfunction using the model. Unilateral cerebral arterial gas embolism was induced in Sprague Dawley rats, including groups receiving intravenous Pluronic F-127 (PF-127) and Oxycyte perflourocarbon surfactant pretreatment. Magnetic resonance imaging (MRI) was performed at 24 and 72 h postembolism to determine infarct volume. The elevated body swing test (EBST), limb-placement test, proprioception forelimb and hindlimb tests, whisker tactile test, and Morris Water Maze test were performed to assess motor behavior, somatosensory deficit, and spatial cognitive function out to 29 days after embolization. A stable stroke model was developed with MRI examination revealing infarction in the ipsilateral cerebral hemisphere. Gas embolized rats had significant cognitive and sensorimotor dysfunction, including approximately threefold increase in Morris Water Maze latency time, ∼20% left-sided biasing in EBST performance, 0.5 to 1.5 (mean) point score elevations in the proprioception and whisker tactile tests, and 3.0 point (mean) elevation in the limb-placement test, all of which were persistent throughout the postembolic period. Surfactant prophylaxis with either PF-127 or Oxycyte rendered stroke undetectable by MRI scanning and markedly reduced the postembolic deficits in both cognitive and sensorimotor performance in treated rats, with normalization of EBST and whisker tactile tests within 7 days.

Air bubble contact with endothelial cells causes a calcium-independent loss in mitochondrial membrane potential

OBJECTIVE

Gas microembolism remains a serious risk associated with surgical procedures and decompression. Despite this, the signaling consequences of air bubbles in the vasculature are poorly understood and there is a lack of pharmacological therapies available. Here, we investigate the mitochondrial consequences of air bubble contact with endothelial cells.

METHODS AND RESULTS

Human umbilical vein endothelial cells were loaded with an intracellular calcium indicator (Fluo-4) and either a mitochondrial calcium indicator (X-Rhod-1) or mitochondrial membrane potential indicator (TMRM). Contact with 50-150 µm air bubbles induced concurrent rises in intracellular and mitochondrial calcium, followed by a loss of mitochondrial membrane potential. Pre-treating cells with 1 µmol/L ruthenium red, a TRPV family calcium channel blocker, did not protect cells from the mitochondrial depolarization, despite blocking the intracellular calcium response. Mitigating the interactions between the air-liquid interface and the endothelial surface layer with 5% BSA or 0.1% Pluronic F-127 prevented the loss of mitochondrial membrane potential. Finally, inhibiting protein kinase C-α (PKCα), with 5 µmol/L Gö6976, protected cells from mitochondrial depolarization, but did not affect the intracellular calcium response.

CONCLUSIONS

Our results indicate that air bubble contact with endothelial cells activates a novel, calcium-independent, PKCα-dependent signaling pathway, which results in mitochondrial depolarization. As a result, mitochondrial dysfunction is likely to be a key contributor to the pathophysiology of gas embolism injury. Further, this connection between the endothelial surface layer and endothelial mitochondria may also play an important role in vascular homeostasis and disease.

Thermodynamics of chitinase partitioning in soy lecithin liposomes and their storage stability

The goal of this study was to define the partitioning behavior of chitinase from Trichoderma spp. in soy lecithin liposomes, using a thermodynamic approach based on the partitioning variation with temperature. An effort has been made to define the liposomes, as well as free and immobilized enzyme stability during storage at 4 and 25 °C. The partition coefficients (K (o/w)) were greater than 1; therefore, the standard free energies of the enzyme transfer were negative, indicating an affinity of the enzymes for encapsulation in liposomes. The enthalpy calculation led to the conclusion that the process is exothermic. The presence of enzyme decreased the liposome storage stability from 70 days to an approximately 20 days at 25 °C and 30 days at 4 °C. Monitoring of the liposome's diameter demonstrated that their size and concentration decreased during storage. The liposome's diameters ranged from 1.06 to 3.30 μm. The higher percentage of liposome corresponded to a diameter range from 1.06 to 1.34 μm. This percentage increased during storage. There were no evidences for liposome fusion process. The stability of immobilized enzyme was increased in comparison with free chitinase.

Protein assembly at the air-water interface studied by fluorescence microscopy

Protein assembly at the air-water interface (AWI) occurs naturally in many biological processes and provides a method for creating biomaterials. However, the factors that control protein self-assembly at the AWI and the dynamic processes that occur during adsorption are still underexplored. Using fluorescence microscopy, we investigated assembly at the AWI of a model protein, human serum albumin minimally labeled with Texas Red fluorophore. Static and dynamic information was obtained under low subphase concentrations. By varying the solution protein concentration, ionic strength, and redox state, we changed the microstructure of protein assembly at the AWI accordingly. The addition of pluronic surfactant caused phase segregation to occur at the AWI, with fluid surfactant domains and more rigid protein domains revealed by fluorescence recovery after photobleaching experiments. Protein domains were observed to coalesce during this competitive adsorption process.

Air bubble contact with endothelial cells in vitro induces calcium influx and IP3-dependent release of calcium stores

Gas embolism is a serious complication of decompression events and clinical procedures, but the mechanism of resulting injury remains unclear. Previous work has demonstrated that contact between air microbubbles and endothelial cells causes a rapid intracellular calcium transient and can lead to cell death. Here we examined the mechanism responsible for the calcium rise. Single air microbubbles (50-150 μm), trapped at the tip of a micropipette, were micromanipulated into contact with individual human umbilical vein endothelial cells (HUVECs) loaded with Fluo-4 (a fluorescent calcium indicator). Changes in intracellular calcium were then recorded via epifluorescence microscopy. First, we confirmed that HUVECs rapidly respond to air bubble contact with a calcium transient. Next, we examined the involvement of extracellular calcium influx by conducting experiments in low calcium buffer, which markedly attenuated the response, or by pretreating cells with stretch-activated channel blockers (gadolinium chloride or ruthenium red), which abolished the response. Finally, we tested the role of intracellular calcium release by pretreating cells with an inositol 1,4,5-trisphosphate (IP3) receptor blocker (xestospongin C) or phospholipase C inhibitor (neomycin sulfate), which eliminated the response in 64% and 67% of cases, respectively. Collectively, our results lead us to conclude that air bubble contact with endothelial cells causes an influx of calcium through a stretch-activated channel, such as a transient receptor potential vanilloid family member, triggering the release of calcium from intracellular stores via the IP3 pathway.

Should the Gibbs analysis be revised?

Recently, some arguments were published that cast doubt on the validity of the Gibbs adsorption isotherm. The doubt was on whether the often visible linearly declining part in the surface tension versus logarithm of concentration plot of a surfactant solution, just before the critical micelle concentration, really represents a situation of constant adsorption. Those published arguments are partly of a conceptual nature and partly based on experimental evidence. The conceptual arguments appear to be based on a misunderstanding of the theory, while the arguments based on experimental evidence stem from an inaccurate treatment of these data. Our conclusion is that none of the relevant arguments put forward are valid. The experimental evidence, if properly treated, is in line with the Gibbs theory.

Competitive protein adsorption on polysaccharide and hyaluronate modified surfaces

Adsorption of bovine serum albumin (BSA) and fibrinogen (Fg) was measured on six distinct bare and dextran- and hyaluronate-modified silicon surfaces created using two dextran grafting densities and three hyaluronic acid (HA) sodium salts derived from human umbilical cord, rooster comb and Streptococcus zooepidemicus. Film thickness and surface morphology depended on the HA molecular weight and concentration. BSA coverage was enhanced on surfaces in competitive adsorption of BSA:Fg mixtures. Dextranization differentially reduced protein adsorption onto surfaces based on oxidation state. Hyaluronization was demonstrated to provide the greatest resistance to protein coverage, equivalent to that of the most resistant dextranized surface. Resistance to protein adsorption was independent of the type of HA utilized. With changing bulk protein concentration from 20 to 40 μg ml(-1) for each species, Fg coverage on silicon increased by 4x, whereas both BSA and Fg adsorption on dextran and HA were far less dependent on protein bulk concentration.

Surfactant properties differentially influence intravascular gas embolism mechanics

Gas bubble motion in a blood vessel causes temporal and spatial gradients of shear stress at the cell surface lining the vessel wall as the bubble approaches the cell, moves over it and passes it by. Rapid reversals occur in the sign of the shear stress imparted to the cell surface during this motion. These may result in injury to the cell. The presence of a soluble surfactant in the bulk medium reduces the level of the shear stress gradients imparted to the cell surface as compared to an equivalent surfactant-free system and is an important therapeutic aid. This is particularly true for a very small vessel. In this study, we analyze various physical and chemical properties of any given soluble surfactant to ascertain the relative significance of the property of the surfactant on the reduction in the level of the shear stress gradients imparted to the cell surface in such a vessel. While adsorption, desorption, and maximum possible monolayer interface surfactant concentration significantly impact the shear stress levels, physical properties such as the bulk or surface diffusivity do not appear to have large effects. At a given diameter, surfactants with k(a)/(k(d)d>O(10)⁻⁵ and Γ(∞)/C(0)d>9.5 x 10⁻⁴ are noted to be preferable from the point of view of an increased gap size between the bubble and vessel wall, and a corresponding reduction in the shear stress level imparted to an endothelial cell. The shear stress characteristics of nearly occluding bubbles, in contrast with smaller sized bubbles under identical conditions, are most affected by the introduction of a surfactant in regard to shear stress levels. These observations could form a basis for choosing surfactants in treating gas embolism related illnesses.