Lactic Acid and Ricinoleic Acid Based Copolyesters

Expression of Physaria longchain acyl-CoA synthetases and hydroxy fatty acid accumulation in transgenic Arabidopsis

Hydroxy fatty acids (HFA) are industrially useful chemical feedstocks that accumulate in seed-storage triacylglycerols (TAG) of several plant species, including castor (Ricinus communis) and Physaria (Physaria fendleri). For researchers, HFA also offer a unique opportunity to trace fatty acid metabolism and modification. Past work producing HFA in Arabidopsis (Arabidopsis thaliana) has demonstrated the importance of isozymes of TAG synthesis from plants that evolved to store HFA and as a result have a high degree of specificity towards HFA substrates. Castor phospholipase A2α (RcPLA2) has specificity for HFA-containing phosphatidylcholine. However, expression of RcPLA2 in HFA-accumulating Arabidopsis line CL37-PLA2 reduced HFA content of TAG. This loss was interpreted as being due to poor ability of Arabidopsis longchain acyl-CoA synthetases (LACSs) to utilize HFAs substrates. LACS enzymes are essential to activate HFA to HFA-CoA for TAG synthesis. Physaria is a close relative of Arabidopsis in the Brassicaceae family. To test the hypothesis that this close relatedness would allow Physaria LACSs to interface successfully with Arabidopsis enzymes of seed lipid metabolism and thereby restore HFA accumulation, we transformed PfLACS4 and PfLACS8 constructs into the CL37-PLA2 line. However, HFA content was not recovered, and biochemical characterization of recombinant PfLACS4 and PfLACS8 indicated that these isozymes have substrate specificities and selectivities that are similar to their Arabidopsis orthologues. These and other results pose an important question about how HFA synthesized on phosphatidylcholine can be transferred into the acyl-CoA pool for TAG synthesis.

Fatty Acids Derivatives From Eukaryotic Microalgae, Pathways and Potential Applications

The exploitation of petrochemical hydrocarbons is compromising ecosystem and human health and biotechnological research is increasingly focusing on sustainable materials from plants and, to a lesser extent, microalgae. Fatty acid derivatives include, among others, oxylipins, hydroxy fatty acids, diols, alkenones, and wax esters. They can occur as storage lipids or cell wall components and possess, in some cases, striking cosmeceutical, pharmaceutical, and nutraceutical properties. In addition, long chain (>20) fatty acid derivatives mostly contain highly reduced methylenic carbons and exhibit a combustion enthalpy higher than that of C_14–20 fatty acids, being potentially suitable as biofuel candidates. Finally, being the building blocks of cell wall components, some fatty acid derivatives might also be used as starters for the industrial synthesis of different polymers. Within this context, microalgae can be a promising source of fatty acid derivatives and, in contrast with terrestrial plants, do not require arable land neither clean water for their growth. Microalgal mass culturing for the extraction and the exploitation of fatty acid derivatives, along with products that are relevant in nutraceutics (e.g., polyunsaturated fatty acids), might contribute in increasing the viability of microalgal biotechnologies. This review explores fatty acids derivatives from microalgae with applications in the field of renewable energies, biomaterials and pharmaceuticals. Nannochloropsis spp. (Eustigmatophyceae, Heterokontophyta) are particularly interesting for biotechnological applications since they grow at faster rates than many other species and possess hydroxy fatty acids and aliphatic cell wall polymers.

Polymers and Composites Derived from Castor Oil as Sustainable Materials and Degradable Biomaterials: Current Status and Emerging Trends

Recent years have seen rapid growth in utilizing vegetable oils to derive a wide variety of polymers to replace petroleum-based polymers for minimizing environmental impact. Nonedible castor oil (CO) can be extracted from castor plants that grow easily, even in an arid land. CO is a promising source for developing several polymers such as polyurethanes, polyesters, polyamides, and epoxy-polymers. Several synthesis routes have been developed, and distinct properties of polymers have been studied for industrial applications. Furthermore, fillers and fibers, including nanomaterials, have been incorporated in these polymers for enhancing their physical, thermal, and mechanical properties. This review highlights the development of CO-based polymers and their composites with attractive properties for industrial and biomedical applications. Recent advancements in CO-based polymers and their composites are presented along with a discussion on future opportunities for further developments in diverse applications.

Emerging insights on drug delivery by fatty acid mediated synthesis of lipophilic prodrugs as novel nanomedicines

Many drug molecules that are currently in the market suffer from short half-life, poor absorption, low specificity, rapid degradation, and resistance development. The design and development of lipophilic prodrugs can provide numerous benefits to overcome these challenges. Fatty acids (FAs), which are lipophilic biomolecules constituted of essential components of the living cells, carry out many necessary functions required for the development of efficient prodrugs. Chemical conjugation of FAs to drug molecules may change their pharmacodynamics/pharmacokinetics in vivo and even their toxicity profile. Well-designed FA-based prodrugs can also present other benefits, such as improved oral bioavailability, promoted tumor targeting efficiency, controlled drug release, and enhanced cellular penetration, leading to improved therapeutic efficacy. In this review, we discuss diverse drug molecules conjugated to various unsaturated FAs. Furthermore, various drug-FA conjugates loaded into various nanostructure delivery systems, including liposomes, solid lipid nanoparticles, emulsions, nano-assemblies, micelles, and polymeric nanoparticles, are reviewed. The present review aims to inspire readers to explore new avenues in prodrug design based on the various FAs with or without nanostructured delivery systems.

Functionalized Boron Nitride Nanosheets/Poly(l-lactide) Nanocomposites and Their Crystallization Behavior

In this work, hydroxyl-functionalized boron nitride nanosheet (OH-BNNS) was prepared and was blended with poly(l-lactide) (PLLA) to yield PLLA/OH-BNNS nanocomposites with excellent dispersion of OH-BNNS via the interaction of carbonyl in PLLA and hydroxyl in OH-BNNS. The effects of OH-BNNS on the crystallization and melting behaviors, isothermal crystallization kinetics, macroscopic crystal morphology and crystal structure of PLLA were studied by means of various techniques. The addition of OH-BNNS nanofillers can effectively accelerate the crystallization of PLLA and enhance the nucleation density, leading to a smaller spherulite size, increased crystallinity, a more obvious crystallization peak upon cooling but weakened cold crystallization behavior upon heating. Low OH-BNNS loading can increase the relative content of α-crystal, but the relative content of less perfect α′-crystal is increased at high OH-BNNS loading due to the strong interaction between PLLA and OH-BNNS.

Star Shaped Long Chain Branched Poly (lactic acid) Prepared by Melt Transesterification with Trimethylolpropane Triacrylate and Nano-ZnO

Long chain branched poly (lactic acid) (LCBPLA) was prepared via transesterification between high molecular weight poly (lactic acid) (PLA) and low molar mass monomer trimethylolpropane triacrylate (TMPTA) during melt blending in the presence of zinc oxide nanoparticles (nano-ZnO) as a transesterification accelerant in a torque rheometer. Compared with the traditional processing methods, this novel way is high-efficiency, environmentally friendly, and gel-free. The results revealed that chain restructuring reactions occurred and TMPTA was grafted onto the PLA backbone. The topological structures of LCBPLA were verified and investigated in detail. It was found that the concentration of the accelerants and the sampling occasion had very important roles in the occurrence of branching structures. When the nano-ZnO dosage was 0.4 phr and PLA was sampled at the time corresponding to the reaction peak in the torque curve, PLA exhibited a star-shaped topological structure with a high branching degree which could obviously affect the melt strength, extrusion foaming performances, and crystallization behaviors. Compared with pristine PLA, LCBPLA showed a higher melt strength, smaller cell diameter, and slower crystallization speed owing to the synergistic effects of nano-ZnO and the long chain branches introduced by the transesterification reaction in the system. However, severe degradation of the LCBPLAs would take place under a mixing time that was too long and lots of short linear chains generated due to the excessive transesterification reaction, with a sharp decline in melt strength.

Synthesis and characterization of biodegradable polyurethane for hypopharyngeal tissue engineering

Biodegradable crosslinked polyurethane (cPU) was synthesized using polyethylene glycol (PEG), L-lactide (L-LA), and hexamethylene diisocyanate (HDI), with iron acetylacetonate (Fe(acac)3) as the catalyst and PEG as the extender. Chemical components of the obtained polymers were characterized by FTIR spectroscopy, (1)H NMR spectra, and Gel Permeation Chromatography (GPC). The thermodynamic properties, mechanical behaviors, surface hydrophilicity, degradability, and cytotoxicity were tested via differential scanning calorimetry (DSC), tensile tests, contact angle measurements, and cell culture. The results show that the synthesized cPU possessed good flexibility with quite low glass transition temperature (T g , -22°C) and good wettability. Water uptake measured as high as 229.7 ± 18.7%. These properties make cPU a good candidate material for engineering soft tissues such as the hypopharynx. In vitro and in vivo tests showed that cPU has the ability to support the growth of human hypopharyngeal fibroblasts and angiogenesis was observed around cPU after it was implanted subcutaneously in SD rats.

Direct copolycondensation of biobased elastomers based on lactic acid with tunable and versatile properties

Tunable and versatile biobased copolyesters with excellent performances in nanocomposites, polylactide tougheners and shape memory were synthesized and characterized.

Compatibilization strategies in poly(lactic acid)-based blends

Recent compatibilization strategies in poly(lactic acid)-based blends have been reviewed in this paper.

Vegetable-oil-based polymers as future polymeric biomaterials

Vegetable oils are one of the most important classes of bio-resources for producing polymeric materials. The main components of vegetable oils are triglycerides - esters of glycerol with three fatty acids. Several highly reactive sites including double bonds, allylic positions and the ester groups are present in triglycerides from which a great variety of polymers with different structures and functionalities can be prepared. Vegetable-oil-based polyurethane, polyester, polyether and polyolefin are the four most important classes of polymers, many of which have excellent biocompatibilities and unique properties including shape memory. In view of these characteristics, vegetable-oil-based polymers play an important role in biomaterials and have attracted increasing attention from the polymer community. Here we comprehensively review recent developments in the preparation of vegetable-oil-based polyurethane, polyester, polyether and polyolefin, all of which have potential applications as biomaterials.

The Mechanical Properties and Hydrophilicity of Poly(L-Lactide)/Laponite Composite Film

Abatract: The poly (L-lactide)/laponite composite films are prepared by the method of solution blending with polylactide (PLA) and laponite. The results show that when laponite content was lower than 0.2 %( mass w/w), laponite can be uniform dispersed in PLA and the composed material had good stability. Fourier transform infrared spectroscopy (FTIR) study demonstrates that PLA was successfully incorporated with laponite by Si-O bond. The mechanical measurement reveals that the tensile strength of PLA/laponite composite film has been increased with compared to pure PLA. The water contact angle (WCA) tests indicate that the hydrophobicity of the laponite modified PLA films can be improved. The present study reveals that the laponite as a complexing agent can improve the mechanical properties and hydrophilicity of PLA.

Tough blends of polylactide and castor oil

Poly(l-lactide) (PLLA) is a renewable resource polymer derived from plant sugars with several commercial applications. Broader implementation of the material is limited due to its inherent brittleness. We show that the addition of 5 wt % castor oil to PLLA significantly enhances the overall tensile toughness with minimal reductions in the modulus and no plasticization of the PLLA matrix. In addition, we used poly(ricinoleic acid)-PLLA diblock copolymers, synthesized entirely from renewable resources, as compatibilizers for the PLLA/castor oil blends. Ricinoleic acid, the majority fatty acid comprising castor oil, was polymerized through a lipase-catalyzed condensation reaction. The resulting polymers contained a hydroxyl end-group that was subsequently used to initiate the ring-opening polymerization of l-lactide. The binary PLLA/castor oil blend exhibited a tensile toughness seven times greater than neat PLLA. The addition of block copolymer allowed for control over the morphology of the blends, and even further improvement in the tensile toughness was realized-an order of magnitude larger than that of neat PLLA.

Lipase-Catalyzed Synthesis and Curing of High-Molecular-Weight Polyricinoleate

High-molecular-weight polyricinoleate, with an M(w) of 100,600, was enzymatically prepared by the polycondensation of methylricinoleate using immobilized lipase from Pseudomonas cepacia (IM-PC) in bulk in the presence of 4 A molecular sieves at 80 degrees C for 7 d. Polyricinoleate was a viscous liquid at room temperature with a glass transition temperature (T(g)) of -74.8 degrees C, showed no crystallinity and was biodegraded by activated sludge. Polyricinoleate was readily cured using a dicumyl peroxide at 170 degrees C for 30 min to produce a chloroform insoluble crosslinked polyricinoleate with a hardness of 50A using durometer A.

In Situ Copolyesters Containing Poly(l-lactide) and Poly(hydroxyalkanoate) Units

In situ copolyesters containing polylactide (PLA) and polyhydroxyalkanoate (PHA) segments were obtained via ring-opening polymerization of L-lactide using PHA as a macroinitiator with stannous octoate as catalyst. Incorporation of PHA (20 wt %) into PLA affords a novel copolymer with Mn values ranging from 25 to 50 KDa and low polydispersities of 1.8-2.3. DSC analysis of the copolymer indicates well-defined crystallization and melting transitions different from the homopolymers and corresponding blend. The polymers were characterized by FT-IR, GPC, DSC, optical microscopy, NMR, and TGA. The results show successful reactivity of PHA as a macroinitiator for the ring-opening polymerization of lactide.

Biodegradable Injectable In Situ Depot-Forming Drug Delivery Systems

The scope of drug-delivery systems has expanded significantly in recent years providing new ways to deliver life saving therapeutics to patients. The development of new injectable drug-delivery systems has provided new vistas and opened up unexplored horizons in the field of science, particularly in controlled drug delivery since these systems possess unique advantages over traditional ones, which include ease of application, and localized and prolonged drug delivery. In the past few years, an increasing number of such systems has been reported in the literature for various biomedical applications, including drug delivery, cell encapsulation, and tissue repair. These are injectable fluids that can be introduced into the body in a minimally invasive manner prior to solidifying or gelling within the desired site. For this purpose both natural (chitosan, alginates) as well as synthetic polymers (PEGylated polyesters, ricinoleic acid-based polymers) have been utilized. These systems have been explored widely for the delivery of various therapeutic agents ranging for anti-neoplastic agents like paclitaxel to proteins and peptides such as insulin, almost covering every segment of the pharmaceutical field. This manuscript focuses on the recent advancements in the area of in situ forming biodegradable polymeric drug-delivery systems.

Hydrolytic Degradation and Drug Release of Ricinoleic Acid–Lactic Acid Copolyesters

A systematic study on the degradation and drug release from L-lactic acid and ricinoleic-acid-based copolyesters is reported. These copolyesters were synthesized by ring opening polymerization (ROP), melt condensation (COND) and transesterification (TRANS) of high molecular weight poly(lactic acid) (PLA) with ricinoleic acid (PLA-RA), and repolymerization by condensation to yield random and block copolymers of weight average molecular weights (Mw) between 3000 and 13,000. All polymers showed an almost zero-order weight loss, with a 20-40% loss after 60 days of incubation. Lactic acid release to the degradation solution is proportional to weight loss of the polymer samples. The main decrease in molecular weight was observed during the first 20 days, followed by a slow degradation phase, which kept the number average molecular weight (Mn) at 4000-2000 for another 40 days. Water-soluble 5FU was released from ricinoleic-acid-based polymers faster than slightly water-soluble triamcinolone. Drug release into phosphate-buffered saline (pH 7.4, 0.1 M) at 37 degrees C from P(LA-RA) 60:40 prepared by condensation of the acids was faster than from pasty P(PLA-RA) 60:40 synthesized by transesterification for both drugs.