Preparation of Azido Polycarbonates and Their Functionalization via Click Chemistry

Azide Ionic Liquids for Safe, Green, and Highly-Efficient Azidation Reactions to Produce Azide Polymers

Azide compounds are widely used and especially, polymers bearing pendant azide groups are highly desired in numerous fields. However, harsh reaction conditions are always mandatory to achieve full azidation, causing severe side reactions and degradation of the polymers. Herein, we report the design and preparation of two azide ionic liquids (AILs) with azide anion and triethylene glycol (E3 )-containing cation, [P444E3 ][N3 ] and [MIME3 ][N3 ]. Compared with the traditional sodium azide (NaN3 ) approach, both AILs showed much higher reaction rates and functional-group tolerance. More importantly, they could act as both reagents and solvents for the quantitative azidation of various polymeric precursors under mild conditions. Theoretical simulations suggested that the outstanding performance of AILs originated from the existence of ion pairs during the reaction, and the E3 moieties played a crucial role. Lastly, after the reaction, the AILs could be easily regenerated, presenting a safer, greener, and highly efficient synthesis route for azide polymers.

Nanoarchitectonics of Spherical Nucleic Acids with Biodegradable Polymer Cores: Synthesis and Evaluation

Spherical nucleic acids (SNAs) have gained significant attention due to their unique properties allowing them to overcome the challenges that face current nanocarriers used for gene therapies. The aim of this study is to synthesize and characterize polymer-oligonucleotide conjugates of different architecture and to evaluate the possibility of forming SNAs with biodegradable cores. Initially, two types of azide (multi)functional polyester-based (co)polymers were successfully synthesized and characterized. In the next step, short oligonucleotide strands were attached to the polymer chains applying the highly efficient and metal-free "click" reaction, thus forming conjugates with block or graft architecture. Both conjugates spontaneously self-assembled in aqueous media forming nanosized SNAs with a biodegradable polyester core and a surface of oligonucleotide chains as evidenced from dynamic and electrophoretic light scattering measurements. The nano-assemblies were in vitro evaluated for potential cytotoxicity. Furthermore, the interactions of the newly synthesized SNAs with membrane lipids were studied. The preliminary results indicate that both types of polymer-based SNAs are good candidates for potential application in gene therapy and that it is worth to be further evaluated.

2,2-Bis(hydroxymethyl) propionic acid based cyclic carbonate monomers and their (co)polymers as advanced materials for biomedical applications

Designing grafted biodegradable polymers with tailored multi-functional properties is one of the most researched fields with extensive biomedical applications. Among many biodegradable polymers, polycarbonates have gained much attention due to their ease of synthesis, high drug loading, and excellent biocompatibility profiles. Among various monomers, 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) derived cyclic carbonate monomers have been extensively explored in terms of their synthesis as well as their polymerization. Since the late 90s, significant advancements have been made in the design of bis-MPA derived cyclic carbonate monomers as well as in their reaction schemes. Currently, bis-MPA derived polycarbonates have taken a form of an entire platform with a multitude of applications, the latest being in the field of nanotechnology, targeted drug, and nucleic acid delivery. The present review outlines an up to date developments that have taken place in the last two decades in the design, synthesis, and biomedical applications of bis-MPA derived cyclic carbonates and their (co)polymers.

Azido-Functionalized Polyurethane Designed for Making Tunable Elastomers by Click Chemistry

Polyurethane is an important biomaterial with wide applications in biomedical engineering. Here, we report a new method to make an azido-functionalized polyurethane prepolymer with no need of postmodification. This prepolymer can easily form stable porous elastomers through click chemistry for cross-linking, instead of using a toxic polyisocyanate. The mechanical properties can be modulated by simply adjusting either the prepolymer concentrations or azido/alkyne ratios for cross-linking. Young's modulus therefore varies from 0.52 to 2.02 MPa for the porous elastomers. When the azido-functionalized polyurethane elastomer is made with a compact structure, Young's modulus increases up to 28.8 MPa at 0-15% strain. The strain at break reaches 150% that is comparable to the commercially resourced Nylon-12. Both the porous and compact elastomers could undergo reversible elastic deformations for at least 200 and 1000 cycles, respectively, within 20% strain without failure. The material showed a considerable stability against erosion in a basic solution. In vivo biocompatibility study demonstrated no degradation by subcutaneous implantation in mice over 2 months. The implant induced only a mild inflammatory response and fibrotic capsule. This material might be useful to make elastomeric components of biomedical devices.

Cationic polycarbonates via ring-opening polymerization: design, synthesis, and applications

The synthetic methods and applications of cationic polycarbonates via ring-opening polymerization are highlighted.

Functional polyamides withgem-diazido units: synthesis and diversification

Polyamide structures bearing geminal diazide units were constructed with diazidated malonates and diamines.

Sequence controlled copolymerization of lactide and a functional cyclic carbonate using stereoselective aluminum catalysts

Stereoselective aluminum complexes were applied for the ROP of LA and MAC producing functional copolyesters with quasi-diblock, tapered, gradient and random sequence distributions.

Functional biodegradable polymers via ring-opening polymerization of monomers without protective groups

Biodegradable polymers are of current interest and chemical functionality in such materials is often demanded in advanced biomedical applications. Functional groups often are not tolerated in the polymerization process of ring-opening polymerization (ROP) and therefore protective groups need to be applied. Advantageously, several orthogonally reactive functions are available, which do not demand protection during ROP. We give an insight into available, orthogonally reactive cyclic monomers and the corresponding functional synthetic and biodegradable polymers, obtained from ROP. Functionalities in the monomer are reviewed, which are tolerated by ROP without further protection and allow further post-modification of the corresponding chemically functional polymers after polymerization. Synthetic concepts to these monomers are summarized in detail, preferably using precursor molecules. Post-modification strategies for the reported functionalities are presented and selected applications highlighted.

Broad Spectrum Macromolecular Antimicrobials with Biofilm Disruption Capability and In Vivo Efficacy

In this study, antimicrobial polymers are synthesized by the organocatalytic ring-opening polymerization of an eight-membered heterocyclic carbonate monomer that is subsequently quaternized with methyl iodide. These polymers demonstrate activity against clinically relevant Gram-positive Staphylococcus epidermidis and Staphylococcus aureus, Gram-negative Escherichia coli and Pseudomonas aeruginosa, and fungus Candida albicans with fast killing kinetics. Importantly, the polymer efficiently inhibits biofilm growth and lyses existing biofilm, leading to a reduction in biomass and cell viability. In addition, the macromolecular antimicrobial is less likely to induce resistance as it acts via a membrane-lytic mechanism. The polymer is not cytotoxic toward mammalian cells with LD₅₀ of 99.0 ± 11.6 mg kg^-1 in mice through i.v. injection. In an S. aureus blood stream infection mouse model, the polymer removes bacteria from the blood more rapidly than the antibiotic Augmentin. At the effective dose, the polymer treatment does not damage liver and kidney tissues or functions. In addition, blood electrolyte balance remains unchanged after the treatment. The low cost of starting materials, ease of synthesis, nontoxicity, broad spectrum activity with fast killing kinetics, and in vivo antimicrobial activity make these macromolecular antimicrobials ideal candidates for prevention of sepsis and treatment of infections.

Interlayer-crosslinked micelles prepared from star-shaped copolymers via click chemistry for sustained drug release

To balance the stability and the particle size of polymeric micelles, star-shaped copolymers Hx-yne-N₃-PEG containing both alkynyl and azido groups were synthesized from hyperbranched 2,2-bismethylolpropionic acid polyester (H20 with 16 hydroxyl, H30 with 32 hydroxyl, H40 with 64 hydroxyl) to develop interlayer-crosslinked micelles by click chemistry. The results of dynamic light scattering indicate that the crosslinking could enhance the stability of polymeric micelles. The crosslinked micelles are regular nanosized (approximately 20 nm) spheres observed by a transmission electron microscope. The crosslinked micelles have better drug loading capacity and more sustained drug release behavior than the un-crosslinked micelles.

Synthesis of cinnamoyl and coumarin functionalized aliphatic polycarbonates

With the objective of generating photo-responsive polymers, carbonate monomers with pendant cinnamoyl or coumarin moieties, which are capable of photo-reversible dimerization, were synthesized.

Recent development of functional aliphatic polycarbonates for the construction of amphiphilic polymers

Functional aliphatic polycarbonates in the construction of amphiphilic polymers are summarized in seven categories (hydrophobic, hydrophilic, or/and functional unit).

Design, synthesis and ring-opening polymerization of a new iodinated carbonate monomer: a universal route towards ultrahigh radiopaque aliphatic polycarbonates

A universal route towards ultrahigh radiopaque aliphatic polycarbonates was developed based on a new iodinated carbonate monomer.

Amphiphilic and Hydrophilic Block Copolymers from Aliphatic N-Substituted 8-Membered Cyclic Carbonates: A Versatile Macromolecular Platform for Biomedical Applications

Introduction of hydrophilic components, particularly amines and zwitterions, onto a degradable polymer platform, while maintaining precise control over the polymer composition, has been a challenge. Recognizing the importance of these hydrophilic residues in multiple aspects of the nanobiomedicine field, herein, a straightforward synthetic route to access well-defined amphiphilic and hydrophilic degradable block copolymers from diethanolamine-derived functional eight-membered N-substituted aliphatic cyclic carbonates is reported. By this route, tertiary amine, secondary amine, and zwitterion residues can be incorporated across the polymer backbone. Demonstration of pH-responsiveness of these hydrophilic residues and their utility in the development of drug-delivery vehicles, catered for the specific requirements of respective model drugs (doxorubicin and diclofenac sodium salt) are shown. As hydrophilic components in degradable polymers play crucial roles in the biological interactions, these materials offers opportunities to expand the scope and applicability of aliphatic cyclic carbonates. Our approach to these functional polycarbonates will expand the range of biocompatible and biodegradable synthetic materials available for nanobiomedicine, including drug and gene delivery, antimicrobials, and hydrophilic polymers as poly(ethylene glycol) (PEG) alternatives.

Expanding the Cationic Polycarbonate Platform: Attachment of Sulfonium Moieties by Postpolymerization Ring Opening of Epoxides

Postpolymerization modification is a critical strategy for the development of functional polycarbonate scaffolds for medicinal applications. To expand the scope of available postpolymerization functionalization methods, polycarbonates containing pendant thioether groups were synthesized by organocatalyzed ring-opening polymerization. The thioether group allowed for the postpolymerization ring-opening of functional epoxides, affording a wide variety of sulfonium-functionalized A-B diblock and A-B-A triblock polycarbonate copolymers. The pendant thioether groups were found to be compatible with previously developed postsynthesis functionalization methods allowing for selective and orthogonal modifications of the polycarbonates.

Properties of Poly(ethylene glycol) Hydrogels Cross-Linked via Strain-Promoted Alkyne-Azide Cycloaddition (SPAAC)

A series of poly(ethylene glycol) (PEG) hydrogels was synthesized using strain-promoted alkyne-azide cycloaddition (SPAAC) between PEG chains terminated with either aza-dibenzocyclooctynes or azide functionalities. The gelation process was found to occur rapidly upon mixing the two components in aqueous solution without the need for external stimuli or catalysts, making the system a candidate for use as an injectable hydrogel. The mechanical and rheological properties of these hydrogels were found to be tunable by varying the polymer molecular weight and the number of cross-linking groups per chain. The gelation times of these hydrogels ranged from 10 to 60 s at room temperature. The mass-based swelling ratios varied from 45 to 76 at maximum swelling (relative to the dry state), while the weight percent of polymer in these hydrogels ranged from 1.31 to 2.05%, demonstrating the variations in amount of polymer required to maintain the structural integrity of the gel. Each hydrogel degraded at a different rate in PBS at pH = 7.4, with degradation times ranging from 1 to 35 days. By changing the composition of the two starting components, it was found that the Young's modulus of each hydrogel could be varied from 1 to 18 kPa. Hydrogel incubation with bovine serum albumin showed minimal protein adsorption. Finally, a cell cytotoxicity study of the precursor polymers with 3T3 fibroblasts demonstrated that the azide- and strained alkyne-functionalized PEGs are noncytotoxic.

An injectable PEG-based hydrogel synthesized by strain-promoted alkyne–azide cycloaddition for use as an embolic agent

Cyclooctyne and azide functionalized PEGs are prepared by ring-opening polymerization. They form a biodegradable hydrogel in situ to temporarily block rabbit ear vessels.

Poly(2-ethyl-2-oxazoline)-block-polycarbonate block copolymers: from improved end-group control in poly(2-oxazoline)s to chain extension with aliphatic polycarbonate through a fully metal-free ring-opening polymerisation process

This work reports on defining optimal conditions to achieve tailored P(EtOx-co-PC) copolymers in an efficient and metal-free ring-opening polymerisation process.

Synthesis and AIE properties of PEG–PLA–PMPC based triblock amphiphilic biodegradable polymers

The synthesis of a novel AIE-active micelle based on living immortal polymerization of cyclic esters and a “click” reaction of azide functionalized TPE is described.

A facile one-step synthesis of star-shaped alkynyl carbonates from CO2

The synthesis of new star-shaped compounds containing three or six pendant carbonates with terminal alkynes at 1 atm CO₂ and room temperature.

Synthesis and properties of tunable thermoresponsive aliphatic polycarbonate copolymers with oligo ethylene glycol containing thioether and/or sulphone groups

Tunable thermoresponsive aliphatic polycarbonates with oligo ethylene glycol containing thioether and/or sulphone groups.

Construction of a Reactive Diblock Copolymer, Polyphosphoester-block-Poly(L-lactide), as a Versatile Framework for Functional Materials that are Capable of Full Degradation and Nanoscopic Assembly Formation

The development of a diblock copolymer, polyphosphoester-block-poly(L-lactide), which has potential for being fully-degradable and biocompatible, was achieved by one-pot sequential ring-opening polymerizations (ROPs) of two cyclic monomers: alkyne-functionalized phospholane and L-lactide (LLA). A kinetic study of the polymerization in each step was investigated in a detailed manner by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC), revealing living/controlled characteristics with narrow molecular weight distributions and a linear increase of molecular weights vs. monomer conversion and time. Subsequently, photo-induced thiol-yne "click" reactions with small molecule thiols bearing either carboxylic acid or amino groups afforded amphiphilic diblock copolymers with carboxylate or amino side-chain functionalities along the polyphosphoester segment of the diblock copolymer backbone. Finally, direct dissolution of the two different types of amphiphilic diblock copolymers in aqueous solutions yielded well-defined spherical micelles with corresponding negative or positive surface charges, respectively, as confirmed by transmission electron microscopy (TEM), dynamic light scattering (DLS) and zeta potential analyses.